-
Enable Super-resolution Parameter Estimation for Mm-wave Channel Sounding
Authors:
Rui Wang,
C. Umit Bas,
Zihang Cheng,
Thomas Choi,
Hao Feng,
Zheda Li,
XiaoKang Ye,
Pan Tang,
Seun Sangodoyin,
Jorge G. Ponce,
Robert Monroe,
Thomas Henige,
Gary Xu,
Jianzhong,
Zhang,
Jeongho Park,
Andreas F. Molisch
Abstract:
This paper investigates the capability of millimeter-wave (mmWave) channel sounders with phased arrays to perform super-resolution parameter estimation, i.e., determine the parameters of multipath components (MPC), such as direction of arrival and delay, with resolution better than the Fourier resolution of the setup. We analyze the question both generally, and with respect to a particular novel m…
▽ More
This paper investigates the capability of millimeter-wave (mmWave) channel sounders with phased arrays to perform super-resolution parameter estimation, i.e., determine the parameters of multipath components (MPC), such as direction of arrival and delay, with resolution better than the Fourier resolution of the setup. We analyze the question both generally, and with respect to a particular novel multi-beam mmWave channel sounder that is capable of performing multiple-input-multiple-output (MIMO) measurements in dynamic environments. We firstly propose a novel two-step calibration procedure that provides higher-accuracy calibration data that are required for Rimax or SAGE. Secondly, we investigate the impact of center misalignment and residual phase noise on the performance of the parameter estimator. Finally we experimentally verify the calibration results and demonstrate the capability of our sounder to perform super-resolution parameter estimation.
△ Less
Submitted 23 January, 2019;
originally announced January 2019.
-
Real-Time Millimeter-Wave MIMO Channel Sounder for Dynamic Directional Measurements
Authors:
C. Umit Bas,
Rui Wang,
Seun Sangodoyin,
Dimitris Psychoudakis,
Thomas Henige,
Robert Monroe,
Jeongho Park,
Jianzhong Zhang,
Andreas F. Molisch
Abstract:
In this paper, we present a novel real-time multiple-input-multiple-output (MIMO) channel sounder for the 28 GHz band. Until now, most investigations of the directional characteristics of millimeter-wave channels have used mechanically rotating horn antennas. In contrast, the sounder presented here is capable of performing horizontal and vertical beam steering with the help of phased arrays. Due t…
▽ More
In this paper, we present a novel real-time multiple-input-multiple-output (MIMO) channel sounder for the 28 GHz band. Until now, most investigations of the directional characteristics of millimeter-wave channels have used mechanically rotating horn antennas. In contrast, the sounder presented here is capable of performing horizontal and vertical beam steering with the help of phased arrays. Due to its fast beam-switching capability, the proposed sounder can perform measurements that are directionally resolved both at the transmitter(TX) and receiver (RX) in 1.44 milliseconds compared to the minutes or even hours required for rotating horn antenna sounders. This not only enables measurement of more TX-RX locations for a better statistical validity but also allows to perform directional analysis in dynamic environments. The short measurement time combined with the high phase stability limits the phase drift between TX and RX, enabling phase-coherent sounding of all beam pairs even when TX and RX have no cabled connection for synchronization without any delay ambiguity. Furthermore, the phase stability over time enables complex RX waveform averaging to improve the signal to noise ratio during high path loss measurements. The paper discusses both the system design as well as the measurements performed for verification of the sounder performance. Furthermore, we present sample results from double directional measurements in dynamic environments.
△ Less
Submitted 31 July, 2018;
originally announced July 2018.
-
On channel sounding with switched arrays in fast time-varying channels
Authors:
Rui Wang,
Olivier Renaudin,
C. Umit Bas,
Seun Sangodoyin,
Andreas F. Molisch
Abstract:
Time-division multiplexed (TDM) channel sounders, in which a single RF chain is connected sequentially via an electronic switch to different elements of an array, are widely used for the measurement of double-directional/MIMO propagation channels. This paper investigates the impact of array switching patterns on the accuracy of parameter estimation of multipath components (MPC) for a time-division…
▽ More
Time-division multiplexed (TDM) channel sounders, in which a single RF chain is connected sequentially via an electronic switch to different elements of an array, are widely used for the measurement of double-directional/MIMO propagation channels. This paper investigates the impact of array switching patterns on the accuracy of parameter estimation of multipath components (MPC) for a time-division multiplexed (TDM) channel sounder. The commonly-used sequential (uniform) switching pattern poses a fundamental limit on the number of antennas that a TDM channel sounder can employ in fast time-varying channels. We thus aim to design improved patterns that relax these constraints. To characterize the performance, we introduce a novel spatio-temporal ambiguity function, which can handle the non-idealities of real-word arrays. We formulate the sequence design problem as an optimization problem and propose an algorithm based on simulated annealing to obtain the optimal sequence. As a result we can extend the estimation range of Doppler shifts by eliminating ambiguities in parameter estimation. We show through Monte Carlo simulations that the root mean square errors of both direction of departure and Doppler are reduced significantly with the new switching sequence. Results are also verified with actual vehicle-to-vehicle (V2V) channel measurements.
△ Less
Submitted 18 May, 2018;
originally announced May 2018.
-
Antenna Switching Sequence Design for Channel Sounding in a Fast Time-varying Channel
Authors:
Rui Wang,
Olivier Renaudin,
C. Umit Bas,
Seun Sangodoyin,
Andreas F. Molisch
Abstract:
This paper investigates the impact of array switching patterns on the accuracy of parameter estimation of multipath components for a time division multiplexed (TDM) channel sounder. To measure fast time-varying channels, the conventional uniform array switching pattern poses a fundamental limit of the number of antennas that a TDM channel sounder can utilize. We propose a method, which is based on…
▽ More
This paper investigates the impact of array switching patterns on the accuracy of parameter estimation of multipath components for a time division multiplexed (TDM) channel sounder. To measure fast time-varying channels, the conventional uniform array switching pattern poses a fundamental limit of the number of antennas that a TDM channel sounder can utilize. We propose a method, which is based on the simulated annealing algorithm, to find non-uniform array switching patterns for realistic antenna arrays, so that we can extend the Doppler estimation range of the channel sounder by suppressing the high sidelobes in the spatio-temporal ambiguity function. Monte Carlo simulations demonstrate that the optimal switching sequence leads to significantly smaller root mean square errors of both direction of departure and Doppler. Results can be applied in both vehicle-to-vehicle and mobile millimeter wave MIMO channel measurements.
△ Less
Submitted 17 May, 2018;
originally announced May 2018.
-
28 GHz Microcell Measurement Campaign for Residential Environment
Authors:
C. Umit Bas,
Rui Wang,
Seun Sangodoyin,
Sooyoung Hur,
Kuyeon Whang,
Jeongho Park,
Jianzhong Zhang,
Andreas F. Molisch
Abstract:
This paper presents results from the (to our knowledge) first double-directionally resolved measurement campaign at mm-wave frequencies in a suburban microcell. The measurements are performed with a real-time channel sounder equipped with phased antenna arrays that allows electrical beam steering in microseconds, and which can measure path-loss of up to 169 dB. Exploiting the phase coherency of th…
▽ More
This paper presents results from the (to our knowledge) first double-directionally resolved measurement campaign at mm-wave frequencies in a suburban microcell. The measurements are performed with a real-time channel sounder equipped with phased antenna arrays that allows electrical beam steering in microseconds, and which can measure path-loss of up to 169 dB. Exploiting the phase coherency of the measurements in the different beams, we obtain both directional and omnidirectional channel power delay profiles without any delay uncertainty. We present statistics of channel characteristics such as path-loss, shadowing and delay spread results for line-of-sight and non-line-of-sight cases, as well as sample results for power angular spectrum and extracted multi-path components.
△ Less
Submitted 31 October, 2017;
originally announced November 2017.
-
Dynamic Double Directional Propagation Channel Measurements at 28 GHz
Authors:
C. Umit Bas,
Rui Wang,
Seun Sangodoyin,
Sooyoung Hur,
Kuyeon Whang,
Jeongho Park,
Jianzhong Zhang,
Andreas F. Molisch
Abstract:
This paper presents results from the (to our knowledge) first dynamic double-directionally resolved measurement campaign at mm-wave frequencies for an outdoor microcellular scenario. The measurements are performed with USC's real-time channel sounder equipped with phased array antennas that can steer beams electrically in microseconds, allowing directional measurements in dynamic environments. Exp…
▽ More
This paper presents results from the (to our knowledge) first dynamic double-directionally resolved measurement campaign at mm-wave frequencies for an outdoor microcellular scenario. The measurements are performed with USC's real-time channel sounder equipped with phased array antennas that can steer beams electrically in microseconds, allowing directional measurements in dynamic environments. Exploiting the phase coherency of the setup, the multi-path components can be tracked over time to investigate the temporal dependencies of the channel characteristics. We present results for time-varying path-loss, delay spread, mean angles and angular spreads observed at the transmitter (TX) and receiver (RX) in the presence of moving vehicles and pedestrians. Additionally, we investigate excess losses observed due to blockage by vehicles and compare the cases when TX and RX are using fixed beams or when they are capable of adjusting beam directions dynamically.
△ Less
Submitted 31 October, 2017;
originally announced November 2017.
-
Outdoor to Indoor Penetration Loss at 28 GHz for Fixed Wireless Access
Authors:
C. Umit Bas,
Rui Wang,
Thomas Choi,
Sooyoung Hur,
Kuyeon Whang,
Jeongho Park,
Jianzhong Zhang,
Andreas F. Molisch
Abstract:
This paper present the results from a 28 GHz channel sounding campaign performed to investigate the effects of outdoor to indoor penetration on the wireless propagation channel characteristics for an urban microcell in a fixed wireless access scenario. The measurements are performed with a real-time channel sounder, which can measure path loss up to 169 dB, and equipped with phased array antennas…
▽ More
This paper present the results from a 28 GHz channel sounding campaign performed to investigate the effects of outdoor to indoor penetration on the wireless propagation channel characteristics for an urban microcell in a fixed wireless access scenario. The measurements are performed with a real-time channel sounder, which can measure path loss up to 169 dB, and equipped with phased array antennas that allows electrical beam steering for directionally resolved measurements in dynamic environments. Thanks to the short measurement time and the excellent phase stability of the system, we obtain both directional and omnidirectional channel power delay profiles without any delay uncertainty. For outdoor and indoor receiver locations, we compare path loss, delay spreads and angular spreads obtained for two different types of buildings.
△ Less
Submitted 31 October, 2017;
originally announced November 2017.
-
Stationarity Region of Mm-Wave Channel Based on Outdoor Microcellular Measurements at 28 GHz
Authors:
R. Wang,
C. U. Bas,
S. Sangodoyin,
S. Hur,
J. Park,
J. Zhang,
A. F. Molisch
Abstract:
The stationarity region, i.e., the area in which the statistics of a propagation channel remain constant, is an important measure of the propagation channel, and essential for efficient system design. This paper presents what is to our knowledge the first extensive measurement campaign for measuring the stationarity region of MIMO mm-wave channels. Using a novel 28 GHz phased-array sounder with hi…
▽ More
The stationarity region, i.e., the area in which the statistics of a propagation channel remain constant, is an important measure of the propagation channel, and essential for efficient system design. This paper presents what is to our knowledge the first extensive measurement campaign for measuring the stationarity region of MIMO mm-wave channels. Using a novel 28 GHz phased-array sounder with high phase stability, we present results in an urban microcell LoS, and LOS to NLOS transition region scenario, for the stationarity region of shadowing, power delay profile, and the angular power spectrum. A comparison to results at cm-waves shows considerably reduced stationarity region size, which has an important impact on system design.
△ Less
Submitted 29 October, 2017;
originally announced October 2017.
-
3D MIMO Outdoor-to-Indoor Propagation Channel Measurement
Authors:
Vinod Kristem,
Seun Sangodoyin,
C. U. Bas,
Martin Kaeske,
Juho Lee,
Christian Schneider,
Gerd Sommerkorn,
J. Zhang,
Reiner S. Thomae,
Andreas F. Molisch
Abstract:
3-dimensional Multiple-Input Multiple-Output (3D MIMO) systems have received great interest recently because of the spatial diversity advantage and capability for full-dimensional beamforming, making them promising candidates for practical realization of massive MIMO. In this paper, we present a low-cost test equipment (channel sounder) and post-processing algorithms suitable for investigating 3D…
▽ More
3-dimensional Multiple-Input Multiple-Output (3D MIMO) systems have received great interest recently because of the spatial diversity advantage and capability for full-dimensional beamforming, making them promising candidates for practical realization of massive MIMO. In this paper, we present a low-cost test equipment (channel sounder) and post-processing algorithms suitable for investigating 3D MIMO channels, as well as the results from a measurement campaign for obtaining elevation and azimuth characteristics in an outdoor-to-indoor (O2I) environment. Due to limitations in available antenna switches, our channel sounder consists of a hybrid switched/virtual cylindrical array with effectively 480 antenna elements at the base station (BS). The virtual setup increased the overall MIMO measurement duration, thereby introducing phase drift errors in the measurements. Using a reference antenna measurements, we estimate and correct for the phase errors during post-processing. We provide the elevation and azimuth angular spreads, for the measurements done in an urban macro-cellular (UMa) and urban micro-cellular (UMi) environments, and study their dependence on the UE height.
Based on the measurements done with UE placed on different floors, we study the feasibility of separating users in the elevation domain. The measured channel impulse responses are also used to study the channel hardening aspects of Massive MIMO and the optimality of Maximum Ratio Combining (MRC) receiver.
△ Less
Submitted 30 March, 2017;
originally announced March 2017.
-
A Real-Time Millimeter-Wave Phased Array MIMO Channel Sounder
Authors:
C. Umit Bas,
Rui Wang,
Dimitris Psychoudakis,
Thomas Henige,
Robert Monroe,
Jeongho Park,
Jianzhong Zhang,
Andreas F. Molisch
Abstract:
In this paper, we present a novel real-time MIMO channel sounder for 28 GHz. Until now, the common practice to investigate the directional characteristics of millimeter-wave channels has been using a rotating horn antenna. The sounder presented here is capable of performing horizontal and vertical beam steering with the help of phased arrays. Thanks to fast beam-switching capability, the proposed…
▽ More
In this paper, we present a novel real-time MIMO channel sounder for 28 GHz. Until now, the common practice to investigate the directional characteristics of millimeter-wave channels has been using a rotating horn antenna. The sounder presented here is capable of performing horizontal and vertical beam steering with the help of phased arrays. Thanks to fast beam-switching capability, the proposed sounder can perform measurements that are directionally resolved both at the transmitter (TX) and receiver (RX) as fast as 1.44 milliseconds compared to the minutes or even hours required for rotating horn antenna sounders. This does not only enable us to measure more points for better statistical inference but also allows to perform directional analysis in dynamic environments. Equally importantly, the short measurement time combined with the high phase stability of our setup limits the phase drift between TX and RX, enabling phase-coherent sounding of all beam pairs even when TX and RX are physically separated and have no cabled connection for synchronization. This ensures that the measurement data is suitable for high-resolution parameter extraction algorithms. Along with the system design and specifications, this paper also discusses the measurements performed for verification of the sounder. Furthermore, we present sample measurements from a channel sounding campaign performed on a residential street.
△ Less
Submitted 22 June, 2017; v1 submitted 15 March, 2017;
originally announced March 2017.
