-
Achievable Rates and Training Overheads for a Measured LOS Massive MIMO Channel
Authors:
Paul Harris,
Wael Boukley Hasan,
Liang Liu,
Steffen Malkowsky,
Mark Beach,
Simon Armour,
Fredrik Tufvesson,
Ove Edfors
Abstract:
This paper presents achievable uplink (UL) sumrate predictions for a measured line-of-sight (LOS) massive multiple-input, multiple-output (MIMO) (MMIMO) scenario and illustrates the trade-off between spatial multiplexing performance and channel de-coherence rate for an increasing number of base station (BS) antennas. In addition, an orthogonal frequency division multiplexing (OFDM) case study is f…
▽ More
This paper presents achievable uplink (UL) sumrate predictions for a measured line-of-sight (LOS) massive multiple-input, multiple-output (MIMO) (MMIMO) scenario and illustrates the trade-off between spatial multiplexing performance and channel de-coherence rate for an increasing number of base station (BS) antennas. In addition, an orthogonal frequency division multiplexing (OFDM) case study is formed which considers the 90% coherence time to evaluate the impact of MMIMO channel training overheads in high-speed LOS scenarios. It is shown that whilst 25% of the achievable zero-forcing (ZF) sumrate is lost when the resounding interval is increased by a factor of 4, the OFDM training overheads for a 100-antenna MMIMO BS using an LTE-like physical layer could be as low as 2% for a terminal speed of 90m/s.
△ Less
Submitted 22 February, 2018; v1 submitted 9 November, 2017;
originally announced November 2017.
-
Millimeter Wave Channel Measurements in a Railway Depot
Authors:
Berna Bulut,
Thomas Barratt,
Di Kong,
Jue Cao,
Alberto Loaiza Freire,
Simon Armour,
Mark Beach
Abstract:
Millimeter wave (mmWave) communication is a key enabling technology with the potential to deliver high capacity, high peak data rate communications for future railway services. Knowledge of the radio characteristics is of paramount importance for the successful deployment of such systems. In this paper mmWave channel measurements are reported for a railway environment using a wideband channel soun…
▽ More
Millimeter wave (mmWave) communication is a key enabling technology with the potential to deliver high capacity, high peak data rate communications for future railway services. Knowledge of the radio characteristics is of paramount importance for the successful deployment of such systems. In this paper mmWave channel measurements are reported for a railway environment using a wideband channel sounder operating at 60GHz. Highly directional antennas are deployed at both ends of the link. Data is reported for path loss, root mean square (RMS) delay spread and K-factor. Static and mobile measurements are considered. Analysis shows that the signal strength is strongly dependent (up to 25dB) on the azimuth orientation of the directional transmit and receive antennas. A path loss exponent of n=2.04 was extracted from the Line-of-Sight measurements with optimally aligned antennas. RMS delay spreads ranged from 1ns to 22ns depending on antenna alignment. 50% of the measured K-factors were found to be less than 6dB. We conclude this is the result of ground reflections in the vertical Tx-Rx plane.
△ Less
Submitted 30 June, 2018; v1 submitted 16 August, 2017;
originally announced August 2017.
-
An Overview of Massive MIMO Research at the University of Bristol
Authors:
Paul Harris,
Wael Boukley Hasan,
Henry Brice,
Benny Chitambira,
Mark Beach,
Evangelos Mellios,
Andrew Nix,
Simon Armour,
Angela Doufexi
Abstract:
Massive MIMO has rapidly gained popularity as a technology crucial to the capacity advances required for 5G wireless systems. Since its theoretical conception six years ago, research activity has grown exponentially, and there is now a develo** industrial interest to commercialise the technology. For this to happen effectively, we believe it is crucial that further pragmatic research is conducte…
▽ More
Massive MIMO has rapidly gained popularity as a technology crucial to the capacity advances required for 5G wireless systems. Since its theoretical conception six years ago, research activity has grown exponentially, and there is now a develo** industrial interest to commercialise the technology. For this to happen effectively, we believe it is crucial that further pragmatic research is conducted with a view to establish how reality differs from theoretical ideals. This paper presents an overview of the massive MIMO research activities occurring within the Communication Systems & Networks Group at the University of Bristol centred around our 128-antenna real-time testbed, which has been developed through the BIO programmable city initiative in collaboration with NI and Lund University. Through recent preliminary trials, we achieved a world first spectral efficiency of 79.4 bits/s/Hz, and subsequently demonstrated that this could be increased to 145.6 bits/s/Hz. We provide a summary of this work here along with some of our ongoing research directions such as large-scale array wave-front analysis, optimised power control and localisation techniques.
△ Less
Submitted 21 May, 2017;
originally announced May 2017.
-
Temporal Analysis of Measured LOS Massive MIMO Channels with Mobility
Authors:
Paul Harris,
Steffen Malkowsky,
Joao Vieira,
Fredrik Tufvesson,
Wael Boukley Hasan,
Liang Liu,
Mark Beach,
Simon Armour,
Ove Edfors
Abstract:
The first measured results for massive multiple-input, multiple-output (MIMO) performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served by a 100 antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of o…
▽ More
The first measured results for massive multiple-input, multiple-output (MIMO) performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served by a 100 antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel information can result in severe detection and precoding inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD) configuration synonymous with massive MIMO deployments could mean only the uplink (UL) is usable in extreme cases. Therefore, it is of great interest to investigate the impact of mobility on massive MIMO performance and consider ways to combat the potential limitations. In a mobile scenario with moving cars and pedestrians, the correlation of the MIMO channel vector over time is inspected for vehicles moving up to 29 km/h. For a 100 antenna system, it is found that the channel state information (CSI) update rate requirement may increase by 7 times when compared to an 8 antenna system, whilst the power control update rate could be decreased by at least 5 times relative to a single antenna system.
△ Less
Submitted 14 March, 2017;
originally announced March 2017.
-
Performance Characterization of a Real-Time Massive MIMO System with LOS Mobile Channels
Authors:
Paul Harris,
Steffen Malkowsky,
Joao Vieira,
Fredrik Tufvesson Wael Boukley Hassan,
Liang Liu,
Mark Beach,
Simon Armour,
Ove Edfors
Abstract:
The first measured results for massive MIMO performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served in real-time using a 100-antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel in…
▽ More
The first measured results for massive MIMO performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served in real-time using a 100-antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel information can result in severe detection and precoding inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD) configuration synonymous with massive multiple-input, multiple-output (MIMO) deployments could mean only the uplink (UL) is usable in extreme cases. Therefore, it is of great interest to investigate the impact of mobility on massive MIMO performance and consider ways to combat the potential limitations. In a mobile scenario with moving cars and pedestrians, the massive MIMO channel is sampled across many points in space to build a picture of the overall user orthogonality, and the impact of both azimuth and elevation array configurations are considered. Temporal analysis is also conducted for vehicles moving up to 29km/h and real-time bit error rates (BERs) for both the UL and DL without power control are presented. For a 100-antenna system, it is found that the channel state information (CSI) update rate requirement may increase by 7 times when compared to an 8-antenna system, whilst the power control update rate could be decreased by at least 5 times relative to a single antenna system.
△ Less
Submitted 19 May, 2017; v1 submitted 30 January, 2017;
originally announced January 2017.
-
Physical-layer Network Coding in Two-Way Heterogeneous Cellular Networks with Power Imbalance
Authors:
Ajay Thampi,
Soung Chang Liew,
Simon Armour,
Zhong Fan,
Lizhao You,
Dritan Kaleshi
Abstract:
The growing demand for high-speed data, quality of service (QoS) assurance and energy efficiency has triggered the evolution of 4G LTE-A networks to 5G and beyond. Interference is still a major performance bottleneck. This paper studies the application of physical-layer network coding (PNC), a technique that exploits interference, in heterogeneous cellular networks. In particular, we propose a rat…
▽ More
The growing demand for high-speed data, quality of service (QoS) assurance and energy efficiency has triggered the evolution of 4G LTE-A networks to 5G and beyond. Interference is still a major performance bottleneck. This paper studies the application of physical-layer network coding (PNC), a technique that exploits interference, in heterogeneous cellular networks. In particular, we propose a rate-maximising relay selection algorithm for a single cell with multiple relays based on the decode-and-forward strategy. With nodes transmitting at different powers, the proposed algorithm adapts the resource allocation according to the differing link rates and we prove theoretically that the optimisation problem is log-concave. The proposed technique is shown to perform significantly better than the widely studied selection-cooperation technique. We then undertake an experimental study on a software radio platform of the decoding performance of PNC with unbalanced SNRs in the multiple-access transmissions. This problem is inherent in cellular networks and it is shown that with channel coding and decoders based on multiuser detection and successive interference cancellation, the performance is better with power imbalance. This paper paves the way for further research in multi-cell PNC, resource allocation, and the implementation of PNC with higher-order modulations and advanced coding techniques.
△ Less
Submitted 15 December, 2014;
originally announced December 2014.