-
Optimizing Energy-Harvesting Hybrid VLC/RF Networks with Random Receiver Orientation
Authors:
Amir Hossein Fahim Raouf,
Chethan Kumar An**appa,
Ismail Guvenc
Abstract:
In this paper, we consider an indoor hybrid visible light communication (VLC) and radio frequency (RF) communication scenario with two-hop downlink transmission. The LED carries both data and energy in the first phase, VLC, to an energy harvester relay node, which then uses the harvested energy to re-transmit the decoded information to the RF user in the second phase, RF communication. The direct…
▽ More
In this paper, we consider an indoor hybrid visible light communication (VLC) and radio frequency (RF) communication scenario with two-hop downlink transmission. The LED carries both data and energy in the first phase, VLC, to an energy harvester relay node, which then uses the harvested energy to re-transmit the decoded information to the RF user in the second phase, RF communication. The direct current (DC) bias and the assigned time duration for VLC transmission are taken into account as design parameters. The optimization problem is formulated to maximize the data rate with the assumption of decode-and-forward relaying for fixed receiver orientation. The non-convex optimization is split into two sub-problems and solved cyclically. It optimizes the data rate by solving two sub-problems: fixing time duration for VLC link to solve DC bias and fixing DC bias to solve time duration. The effect of random receiver orientation on the data rate is also studied, and closed-form expressions for both VLC and RF data rates are derived. The optimization is solved through an exhaustive search, and the results show that a higher data rate can be achieved by solving the joint problem of DC bias and time duration compared to solely optimizing the DC bias.
△ Less
Submitted 4 October, 2023; v1 submitted 6 February, 2023;
originally announced February 2023.
-
Optimal Design of Energy-Harvesting Hybrid VLC-RF Networks
Authors:
Amir Hossein Fahim Raouf,
Chethan Kumar An**appa,
Ismail Guvenc
Abstract:
In this paper, we consider an indoor downlink dual-hop hybrid visible light communication (VLC)/radio frequency (RF) scenario. For each transmission block, we dynamically allocate a portion of time resources to VLC and the other portion to RF transmission. In the first phase (i.e., VLC transmission), the LED carries both data and energy to an energy harvester relay node. In the second phase (i.e.,…
▽ More
In this paper, we consider an indoor downlink dual-hop hybrid visible light communication (VLC)/radio frequency (RF) scenario. For each transmission block, we dynamically allocate a portion of time resources to VLC and the other portion to RF transmission. In the first phase (i.e., VLC transmission), the LED carries both data and energy to an energy harvester relay node. In the second phase (i.e., RF communication), the relay utilizes the harvested energy to re-transmit the decoded information to the far RF user. During this phase, the LED continues to transmit power (no information) to the relay node, aiming to harvest energy that can be used in the next transmission block. We formulate the optimization problem in the sense of maximizing the data rate under the assumption of decode-and-forward (DF) relaying. As the design parameters, the direct current (DC) bias and the assigned time duration for VLC transmission are taken into account. In particular, the joint non-convex optimization is split into two sub-problems, which are then cyclically solved. In the first sub-problem, we fix the assigned time duration to VLC link and utilize the majorization-minimization (MM) procedure to solve the non-convex DC bias problem. In the second sub-problem, we fix the DC bias obtained in the previous step and solve the optimization problem for the assigned VLC link time duration. Our results demonstrate that a higher data rate can be achieved by solving the joint problem of DC bias and time duration compared to solely optimizing the DC bias.
△ Less
Submitted 19 November, 2022; v1 submitted 9 June, 2022;
originally announced June 2022.
-
A Framework for Develo** Algorithms for Estimating Propagation Parameters from Measurements
Authors:
Akbar Sayeed,
Peter Vouras,
Camillo Gentile,
Alec Weiss,
Jeanne Quimby,
Zihang Cheng,
Bassel Modad,
Yuning Zhang,
Chethan An**appa,
Fatih Erden,
Ozgur Ozdemir,
Robert Muller,
Diego Dupleich,
Han Niu,
6David Michelson,
6Aidan Hughes
Abstract:
A framework is proposed for develo** and evaluating algorithms for extracting multipath propagation components (MPCs) from measurements collected by sounders at millimeter-wave (mmW) frequencies. To focus on algorithmic performance, an idealized model is proposed for the spatial frequency response of the propagation environment measured by a sounder. The input to the sounder model is a pre-deter…
▽ More
A framework is proposed for develo** and evaluating algorithms for extracting multipath propagation components (MPCs) from measurements collected by sounders at millimeter-wave (mmW) frequencies. To focus on algorithmic performance, an idealized model is proposed for the spatial frequency response of the propagation environment measured by a sounder. The input to the sounder model is a pre-determined set of MPC parameters that serve as the "ground truth." A three-dimensional angle-delay (beamspace) representation of the measured spatial frequency response serves as a natural domain for implementing and analyzing MPC extraction algorithms. Metrics for quantifying the error in estimated MPC parameters are introduced. Initial results are presented for a greedy matching pursuit algorithm that performs a least-squares (LS) reconstruction of the MPC path gains within the iterations. The results indicate that the simple greedy-LS algorithm has the ability to extract MPCs over a large dynamic range, and suggest several avenues for further performance improvement through extensions of the greedy-LS algorithm as well as by incorporating features of other algorithms, such as SAGE and RIMAX.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Coverage Hole Detection for mmWave Networks: An Unsupervised Learning Approach
Authors:
Chethan K. An**appa,
Ismail Guvenc
Abstract:
The utilization of millimeter-wave (mmWave) bands in 5G networks poses new challenges to network planning. Vulnerability to blockages at mmWave bands can cause coverage holes (CHs) in the radio environment, leading to radio link failure when a user enters these CHs. Detection of the CHs carries critical importance so that necessary remedies can be introduced to improve coverage. In this letter, we…
▽ More
The utilization of millimeter-wave (mmWave) bands in 5G networks poses new challenges to network planning. Vulnerability to blockages at mmWave bands can cause coverage holes (CHs) in the radio environment, leading to radio link failure when a user enters these CHs. Detection of the CHs carries critical importance so that necessary remedies can be introduced to improve coverage. In this letter, we propose a novel approach to identify the CHs in an unsupervised fashion using a state-of-the-art manifold learning technique: uniform manifold approximation and projection. The key idea is to preserve the local-connectedness structure inherent in the collected unlabelled channel samples, such that the CHs from the service area are detectable. Our results on the DeepMIMO dataset scenario demonstrate that the proposed method can learn the structure within the data samples and provide visual holes in the low-dimensional embedding while preserving the CH boundaries. Once the CH boundary is determined in the low-dimensional embedding, channel-based localization techniques can be applied to these samples to obtain the geographical boundaries of the CHs.
△ Less
Submitted 21 August, 2021; v1 submitted 17 August, 2021;
originally announced August 2021.
-
Slow Beam Steering for Indoor Multi-User Visible Light Communications
Authors:
Yusuf Said Eroglu,
Chethan Kumar An**appa,
Ismail Guvenc,
Nezih Pala
Abstract:
Visible light communications (VLC) is an emerging technology that enables broadband data rates using the visible spectrum. VLC beam steering has been studied in the literature to track mobile users and to improve coverage. However, in some scenarios, it may be needed to track and serve multiple users using a single beam, which has not been rigorously studied in the existing works to our best knowl…
▽ More
Visible light communications (VLC) is an emerging technology that enables broadband data rates using the visible spectrum. VLC beam steering has been studied in the literature to track mobile users and to improve coverage. However, in some scenarios, it may be needed to track and serve multiple users using a single beam, which has not been rigorously studied in the existing works to our best knowledge. In this paper, considering slow beam steering where beam directions are assumed to be fixed within a transmission frame, we find the optimum steering angles to simultaneously serve multiple users within the frame duration. This is achieved by solving a non-convex optimization problem using grid based search and majorization-minimization (MM) procedure. Additionally, we consider multiple steerable beams case with larger number of users in the network, and propose an algorithm to cluster users and serve each cluster with a separate beam. The simulation results show that clustering users can provide higher rates compared to serving each user with a separate beam, and two user clusters maximizes the sum rate in a crowded room setting.
△ Less
Submitted 26 May, 2018;
originally announced May 2018.
-
Angular and Temporal Correlation of V2X Channels Across Sub-6 GHz and mmWave Bands
Authors:
Chethan Kumar An**appa,
Ismail Guvenc
Abstract:
5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization capabilities. The reliability of mmWave links may be compromised due to difficulties in beam alignment for mobile channels and due to blocking effects between a mm…
▽ More
5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization capabilities. The reliability of mmWave links may be compromised due to difficulties in beam alignment for mobile channels and due to blocking effects between a mmWave transmitter and a receiver. To address such challenges, out-of-band information from sub-6 GHz channels can be utilized for predicting the temporal and angular channel characteristics in mmWave bands, which necessitates a good understanding of how propagation characteristics are coupled across different bands. In this paper, we use ray tracing simulations to characterize the angular and temporal correlation across a wide range of propagation frequencies for V2X channels ranging from 900 MHz up to 73 GHz, for a vehicle maintaining line-of-sight (LOS) and non-LOS (NLOS) beams with a transmitter in an urban environment. Our results shed light on increasing sparsity behavior of propagation channels with increasing frequency and highlight the strong temporal/angular correlation among 5.9 GHz and 28 GHz bands especially for LOS channels.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
