-
VLSI Implementation of Novel Class of High Speed Pipelined Digital Signal Processing Filter for Wireless Receivers
Authors:
Rozita Teymourzadeh,
Yazan Samir Algnabi,
Masuri Othman,
Md Shabiul Islam,
Mok Vee Hong
Abstract:
The need for a high-performance transceiver with high Signal to Noise Ratio (SNR) has driven the communication system to utilize the latest technique identified as oversampling systems. It was the most economical modulator and decimation in the communication system. It has been proven to increase the SNR and is used in many high-performance systems such as in the Analog to Digital Converter (ADC)…
▽ More
The need for a high-performance transceiver with high Signal to Noise Ratio (SNR) has driven the communication system to utilize the latest technique identified as oversampling systems. It was the most economical modulator and decimation in the communication system. It has been proven to increase the SNR and is used in many high-performance systems such as in the Analog to Digital Converter (ADC) for wireless transceiver. This research work presented the design of the novel class of decimation and it's VLSI implementation which was the sub-component in the oversampling technique. The design and realization of the main unit of decimation stage that was the Cascaded Integrator Comb (CIC) filter, the associated half-band filters, and the droop correction are also designed. The Verilog HDL code in Xilinx ISE environment has been derived to describe the proposed advanced CIC filter properties. Consequently, Virtex-II FPGA board was used to implement and test the design on the real hardware. The ASIC design implementation was performed accordingly and resulted in power and area measurement on-chip core layout. The proposed design focused on the trade-off between the high speed and the low power consumption as well as the silicon area and high resolution for the chip implementation which satisfies wireless communication systems. The synthesis report illustrates the maximum clock frequency of 332 MHz with the active core area of 0.308 x 0.308 mm2. It can be concluded that VLSI implementation of proposed filter architecture is an enabler in solving problems that affect communication capability in DSP application.
△ Less
Submitted 9 June, 2018;
originally announced July 2018.
-
Novel Architecture of Pipeline Radix 2 power of 2 SDF FFT Based on Digit-Slicing Technique
Authors:
Yazan Samir Algnabi,
Furat A. Aldaamee,
Rozita Teymourzadeh
Abstract:
The prevalent need for very high-speed digital signals processing in wireless communications has driven the communications system to high-performance levels. The objective of this paper is to propose a novel structure for efficient implementation for the Fast Fourier Transform (FFT) processor to meet the requirement for high-speed wireless communication system standards. Based on the algorithm, ar…
▽ More
The prevalent need for very high-speed digital signals processing in wireless communications has driven the communications system to high-performance levels. The objective of this paper is to propose a novel structure for efficient implementation for the Fast Fourier Transform (FFT) processor to meet the requirement for high-speed wireless communication system standards. Based on the algorithm, architecture analysis, the design of pipeline Radix 2power of 2 SDF FFT processor based on digit-slicing Multiplier-Less is proposed. Furthermore, this paper proposed an optimal constant multiplication arithmetic design to multiply a fixed point input selectively by one of the several present twiddle factor constants. The proposed architecture was simulated using MATLAB software and the Field Programmable Gate Array (FPGA) Virtex 4 was targeted to synthesis the proposed architecture. The design was tested in real hardware of TLA5201 logic analyzer and the ISE synthesis report results the high speed of 669.277 MHz with the total equivalent gate count of 14,854. Meanwhile, It can be found as significant improvement over Radix 22 DIF SDF FFT processor and can be concluded that the proposed pipeline Radix 22 DIF SDF FFT processor based on digit-slicing multiplier-less is an enable in solving problems that affect the most high-speed wireless communication systems capability in FFT and possesses huge potentials for future related works and research areas.
△ Less
Submitted 10 June, 2018;
originally announced June 2018.
-
FPGA Implementation of pipeline Digit-Slicing Multiplier-Less Radix 2 power of 2 DIF SDF Butterfly for Fourier Transform Structure
Authors:
Yazan Samir Algnabi,
Rozita Teymourzadeh,
Masuri Othman,
Md Shabiul Islam
Abstract:
The need for wireless communication has driven the communication systems to high performance. However, the main bottleneck that affects the communication capability is the Fast Fourier Transform (FFT), which is the core of most modulators. This paper presents FPGA implementation of pipeline digit-slicing multiplier-less radix 22 DIF (Decimation In Frequency) SDF (single path delay feedback) butter…
▽ More
The need for wireless communication has driven the communication systems to high performance. However, the main bottleneck that affects the communication capability is the Fast Fourier Transform (FFT), which is the core of most modulators. This paper presents FPGA implementation of pipeline digit-slicing multiplier-less radix 22 DIF (Decimation In Frequency) SDF (single path delay feedback) butterfly for FFT structure. The approach is taken, in order to reduce computation complexity in butterfly multiplier, the digit-slicing multiplier-less technique was utilized in the critical path of pipeline Radix-22 DIF SDF FFT structure. The proposed design focused on the trade-off between the speed and active silicon area for the chip implementation. The multiplier input data was sliced into four blocks each one with four bits to process at the same time in parallel. The new architecture was investigated and simulated with MATLAB software. The Verilog HDL code in Xilinx ISE environment was derived to describe the FFT Butterfly functionality and was downloaded to Virtex II FPGA board. Consequently, the Virtex-II FG456 Proto board was used to implement and test the design on the real hardware. As a result, from the findings, the synthesis report indicates the maximum clock frequency of 555.75 MHz with the total equivalent gate count of 32,146 is a marked and significant improvement over Radix 22 DIF SDF FFT butterfly. In comparison with the conventional butterfly architecture design which can only run at a maximum clock frequency of 200.102 MHz and the conventional multiplier can only run at a maximum clock frequency of 221.140 MHz, the proposed system exhibits better results.
△ Less
Submitted 9 June, 2018;
originally announced June 2018.