Showing 1–50 of 141 results for author: Alexandropoulos, G C

Reconfigurable Intelligent Computational Surfaces for MEC-Assisted Autonomous Driving Networks: Design Optimization and Analysis

Authors: Xueyao Zhang, Bo Yang, Zhiwen Yu, Xuelin Cao, George C. Alexandropoulos, Yan Zhang, Merouane Debbah, Chau Yuen

Abstract: This paper investigates autonomous driving safety improvement via task offloading from cellular vehicles (CVs) to a multi-access edge computing (MEC) server using vehicle-to-infrastructure (V2I) links. Considering that the latter links can be reused by vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of the V2I link may suffer from severe interference that can… ▽ More This paper investigates autonomous driving safety improvement via task offloading from cellular vehicles (CVs) to a multi-access edge computing (MEC) server using vehicle-to-infrastructure (V2I) links. Considering that the latter links can be reused by vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of the V2I link may suffer from severe interference that can cause outages during the task offloading. To tackle this issue, we propose the deployment of a reconfigurable intelligent computational surface (RICS) whose computationally capable metamaterials are leveraged to jointly enable V2I reflective links as well as to implement interference cancellation at the V2V links. We devise a joint optimization formulation for the task offloading ratio between the CVs and the MEC server, the spectrum sharing strategy between V2V and V2I communications, as well as the RICS reflection and refraction matrices to maximize an autonomous driving safety task. Due to the non-convexity of the problem and the coupling among its free variables, we transform it into a more tractable equivalent form, which is then decomposed into three sub-problems solved via an alternate approximation method. Our simulation results showcase that the proposed RICS-assisted offloading framework significantly improves the safety of the considered autonomous driving network, yielding a nearly 34\% improvement in the safety coefficient of the CVs. In addition, it is demonstrated that the V2V data rate can be improved by around 60\% indicating that the RICS-induced adjustment of the signals can effectively mitigate interference at the V2V link. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Multi-RIS-Empowered Multiple Access: A Distributed Sum-Rate Maximization Approach

Authors: Konstantinos D. Katsanos, Paolo Di Lorenzo, George C. Alexandropoulos

Abstract: The plethora of wirelessly connected devices, whose deployment density is expected to largely increase in the upcoming sixth Generation (6G) of wireless networks, will naturally necessitate substantial advances in multiple access schemes. Reconfigurable Intelligent Surfaces (RISs) constitute a candidate 6G technology capable to offer dynamic over-the-air signal propagation programmability, which c… ▽ More The plethora of wirelessly connected devices, whose deployment density is expected to largely increase in the upcoming sixth Generation (6G) of wireless networks, will naturally necessitate substantial advances in multiple access schemes. Reconfigurable Intelligent Surfaces (RISs) constitute a candidate 6G technology capable to offer dynamic over-the-air signal propagation programmability, which can be optimized for efficient non-orthogonal access of a multitude of devices. In this paper, we study the downlink of a wideband communication system comprising multiple multi-antenna Base Stations (BSs), each wishing to serve an associated single-antenna user via the assistance of a Beyond Diagonal (BD) and frequency-selective RIS. Under the assumption that each BS performs Orthogonal Frequency Division Multiplexing (OFDM) transmissions and exclusively controls a distinct RIS, we focus on the sum-rate maximization problem and present a distributed joint design of the linear precoders at the BSs as well as the tunable capacitances and the switch selection matrices at the multiple BD RISs. The formulated non-convex design optimization problem is solved via successive concave approximation necessitating minimal cooperation among the BSs. Our extensive simulation results showcase the performance superiority of the proposed cooperative scheme over non-cooperation benchmarks, indicating the performance gains with BD RISs via the presented optimized frequency selective operation for various scenarios. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: Submitted to an IEEE Journal

Sustainable Wireless Networks via Reconfigurable Intelligent Surfaces (RISs): Overview of the ETSI ISG RIS

Authors: Ruiqi Liu, Shuang Zheng, Qingqing Wu, Yifan Jiang, Nan Zhang, Yuanwei Liu, Marco Di Renzo, and George C. Alexandropoulos

Abstract: Reconfigurable Intelligent Surfaces (RISs) are a novel form of ultra-low power devices that are capable to increase the communication data rates as well as the cell coverage in a cost- and energy-efficient way. This is attributed to their programmable operation that enables them to dynamically manipulate the wireless propagation environment, a feature that has lately inspired numerous research inv… ▽ More Reconfigurable Intelligent Surfaces (RISs) are a novel form of ultra-low power devices that are capable to increase the communication data rates as well as the cell coverage in a cost- and energy-efficient way. This is attributed to their programmable operation that enables them to dynamically manipulate the wireless propagation environment, a feature that has lately inspired numerous research investigations and applications. To pave the way to the formal standardization of RISs, the European Telecommunications Standards Institute (ETSI) launched the Industry Specification Group (ISG) on the RIS technology in September 2021. This article provides a comprehensive overview of the status of the work conducted by the ETSI ISG RIS, covering typical deployment scenarios of reconfigurable metasurfaces, use cases and operating applications, requirements, emerging hardware architectures and operating modes, as well as the latest insights regarding future directions of RISs and the resulting smart wireless environments. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Comments: 7 pages, 5 figures, submitted to an IEEE Magazine

Physically-Consistent Modeling and Optimization of Non-local RIS-Assisted Multi-User MIMO Communication Systems

Authors: Dilki Wijekoon, Amine Mezghani, George C. Alexandropoulos, Ekram Hossain

Abstract: Mutual Coupling (MC) emerges as an inherent feature in Reconfigurable Intelligent Surfaces (RISs), particularly, when they are fabricated with sub-wavelength inter-element spacing. Hence, any physically-consistent model of the RIS operation needs to accurately describe MC-induced effects. In addition, the design of the ElectroMagnetic (EM) transmit/receive radiation patterns constitutes another cr… ▽ More Mutual Coupling (MC) emerges as an inherent feature in Reconfigurable Intelligent Surfaces (RISs), particularly, when they are fabricated with sub-wavelength inter-element spacing. Hence, any physically-consistent model of the RIS operation needs to accurately describe MC-induced effects. In addition, the design of the ElectroMagnetic (EM) transmit/receive radiation patterns constitutes another critical factor for efficient RIS operation. The latter two factors lead naturally to the emergence of non-local RIS structures, whose operation can be effectively described via non-diagonal phase shift matrices. In this paper, we focus on jointly optimizing MC and the radiation patterns in multi-user MIMO communication systems assisted by non-local RISs, which are modeled via the scattering parameters. We particularly present a novel problem formulation for the joint optimization of MC, radiation patterns, and the active and passive beamforming in a physically-consistent manner, considering either reflective or transmissive RIS setups. Differently from the current approaches that design the former two parameters on the fly, we present an offline optimization method which is solved for both considered RIS functionalities. Our extensive simulation results, using both parametric and geometric channel models, showcase the validity of the proposed optimization framework over benchmark schemes, indicating that improved performance is achievable without the need for optimizing MC and the radiation patterns of the RIS on the fly, which can be rather cumbersome. △ Less

Submitted 8 June, 2024; originally announced June 2024.

Comments: 13 pages, 12 figures, submitted to an IEEE Transactions. arXiv admin note: substantial text overlap with arXiv:2404.04539

Near-Field Beam Tracking with Extremely Large Dynamic Metasurface Antennas

Authors: Panagiotis Gavriilidis, George C. Alexandropoulos

Abstract: The interplay between large antenna apertures and high frequencies in future generations of wireless networks will give rise to near-field communications. In this paper, we focus on the hybrid analog and digital beamforming architecture of dynamic metasurface antennas, which constitutes a recent prominent enabler of extremely massive antenna architectures, and devise a near-field beam tracking fra… ▽ More The interplay between large antenna apertures and high frequencies in future generations of wireless networks will give rise to near-field communications. In this paper, we focus on the hybrid analog and digital beamforming architecture of dynamic metasurface antennas, which constitutes a recent prominent enabler of extremely massive antenna architectures, and devise a near-field beam tracking framework that initiates near-field beam swee** only when the base station estimates that its provided beamforming gain drops below a threshold from its theoretically optimum value. Novel analytical expressions for the correlation function between any two beam focusing vectors, the beamforming gain with respect to user coordinate mismatch, the direction of the user movement yielding the fastest beamforming gain deterioration, and the minimum user displacement for a certain performance loss are presented. We also design a non-uniform coordinate grid for effectively sampling the user area of interest at each position estimation slot. Our extensive simulation results validate our theoretical analysis and showcase the superiority of the proposed near-field beam tracking over benchmarks. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Comments: 13 pages, 9 figures, submitted to an IEEE Transactions

Adaptive Polynomial Chaos Expansion for Uncertainty Quantification and Optimization of Horn Antennas at SubTHz Frequencies

Authors: Aristeides D. Papadopoulos, Yihan Ma, Qi Luo, George C. Alexandropoulos

Abstract: Sub-terahertz (subTHz) antennas will play an important role in the next generations of wireless communication systems. However, when comes to the subTHz frequency spectrum, the antenna fabrication tolerance needs to be accurately considered during the design stage. The classic approach to studying the average performance of an antenna design considering fabrication tolerances is through the use of… ▽ More Sub-terahertz (subTHz) antennas will play an important role in the next generations of wireless communication systems. However, when comes to the subTHz frequency spectrum, the antenna fabrication tolerance needs to be accurately considered during the design stage. The classic approach to studying the average performance of an antenna design considering fabrication tolerances is through the use of the Monte-Carlo (MC) method. In this paper, we propose an adaptive polynomial chaos expansion (PCE) method for the uncertainty quantification analysis of subTHz horn antennas with flat-top radiation patterns. The proposed method builds a surrogate model of the antenna's response to electromagnetic (EM) excitation and estimates its statistical moments with accuracy close to the reference MC method, but with a much smaller computational complexity of roughly two orders of magnitude. Moreover, the surrogate model based on PCE can substitute full-wave EM solvers in producing samples for electromagnetic quantities of interest, resulting in significant computational efficiency gains during optimization tasks. To this end, we successfully combined PCE with the particle swarm optimization method to design the free parameters of a horn antenna at $95$ GHz for a flat-top gain. △ Less

Submitted 6 April, 2024; originally announced April 2024.

Comments: 10 pages, 12 figures, submitted to an IEEE Transactions Journal

Electromagnetically-Consistent Modeling and Optimization of Mutual Coupling in RIS-Assisted Multi-User MIMO Communication Systems

Authors: Dilki Wijekoon, Amine Mezghani, George C. Alexandropoulos, Ekram Hossain

Abstract: Mutual Coupling (MC) is an unavoidable feature in Reconfigurable Intelligent Surfaces (RISs) with sub-wavelength inter-element spacing. Its inherent presence naturally leads to non-local RIS structures, which can be efficiently described via non-diagonal phase shift matrices. In this paper, we focus on optimizing MC in RIS-assisted multi-user MIMO wireless communication systems. We particularly fo… ▽ More Mutual Coupling (MC) is an unavoidable feature in Reconfigurable Intelligent Surfaces (RISs) with sub-wavelength inter-element spacing. Its inherent presence naturally leads to non-local RIS structures, which can be efficiently described via non-diagonal phase shift matrices. In this paper, we focus on optimizing MC in RIS-assisted multi-user MIMO wireless communication systems. We particularly formulate a novel problem to jointly optimize active and passive beamforming as well as MC in a physically consistent manner. To characterize MC, we deploy scattering parameters and propose a novel approach to optimize them through an offline optimization method, rather than optimizing MC on the fly. Our numerical results showcase that the system performance increases with the proposed MC optimization, and this improvement is achievable without the need for optimizing MC on-the-fly, which can be rather cumbersome. △ Less

Submitted 6 April, 2024; originally announced April 2024.

Comments: 6 pages, 5 figures, to be presented in IEEE ICC 2024

Single- and Multi-Agent Private Active Sensing: A Deep Neuroevolution Approach

Authors: George Stamatelis, Angelos-Nikolaos Kanatas, Ioannis Asprogerakas, George C. Alexandropoulos

Abstract: In this paper, we focus on one centralized and one decentralized problem of active hypothesis testing in the presence of an eavesdropper. For the centralized problem including a single legitimate agent, we present a new framework based on NeuroEvolution (NE), whereas, for the decentralized problem, we develop a novel NE-based method for solving collaborative multi-agent tasks, which interestingly… ▽ More In this paper, we focus on one centralized and one decentralized problem of active hypothesis testing in the presence of an eavesdropper. For the centralized problem including a single legitimate agent, we present a new framework based on NeuroEvolution (NE), whereas, for the decentralized problem, we develop a novel NE-based method for solving collaborative multi-agent tasks, which interestingly maintains all computational benefits of single-agent NE. The superiority of the proposed EAHT approaches over conventional active hypothesis testing policies, as well as learning-based methods, is validated through numerical investigations in an example use case of anomaly detection over wireless sensor networks. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Comments: 7 pages, 5 figures, accepted at IEEE ICC 2024 (to be presented)

Near-Field Channel Modeling for Holographic MIMO Communications

Authors: Tierui Gong, Li Wei, Chongwen Huang, George C. Alexandropoulos, Mérouane Debbah, Chau Yuen

Abstract: Empowered by the latest progress on innovative metamaterials/metasurfaces and advanced antenna technologies, holographic multiple-input multiple-output (H-MIMO) emerges as a promising technology to fulfill the extreme goals of the sixth-generation (6G) wireless networks. The antenna arrays utilized in H-MIMO comprise massive (possibly to extreme extent) numbers of antenna elements, densely spaced… ▽ More Empowered by the latest progress on innovative metamaterials/metasurfaces and advanced antenna technologies, holographic multiple-input multiple-output (H-MIMO) emerges as a promising technology to fulfill the extreme goals of the sixth-generation (6G) wireless networks. The antenna arrays utilized in H-MIMO comprise massive (possibly to extreme extent) numbers of antenna elements, densely spaced less than half-a-wavelength and integrated into a compact space, realizing an almost continuous aperture. Thanks to the expected low cost, size, weight, and power consumption, such apertures are expected to be largely fabricated for near-field communications. In addition, the physical features of H-MIMO enable manipulations directly on the electromagnetic (EM) wave domain and spatial multiplexing. To fully leverage this potential, near-field H-MIMO channel modeling, especially from the EM perspective, is of paramount significance. In this article, we overview near-field H-MIMO channel models elaborating on the various modeling categories and respective features, as well as their challenges and evaluation criteria. We also present EM-domain channel models that address the inherit computational and measurement complexities. Finally, the article is concluded with a set of future research directions on the topic. △ Less

Submitted 16 March, 2024; v1 submitted 14 March, 2024; originally announced March 2024.

Comments: double column, 9 pages, 3 figures, 2 tables, accepted by IEEE Wireless Communications Magazine

Reconfigurable Intelligent Surfaces for THz: Hardware Design and Signal Processing Challenges

Authors: George C. Alexandropoulos, Antonio Clemente, Sérgio Matos, Ryan Husbands, Sean Ahearne, Qi Luo, Verónica Lain-Rubio, Thomas Kürner, Luís M. Pessoa

Abstract: Wireless communications in the THz frequency band is an envisioned revolutionary technology for sixth Generation (6G) networks. However, such frequencies impose certain coverage and device design challenges that need to be efficiently overcome. To this end, the development of cost- and energy-efficient approaches for scaling these networks to realistic scenarios constitute a necessity. Among the r… ▽ More Wireless communications in the THz frequency band is an envisioned revolutionary technology for sixth Generation (6G) networks. However, such frequencies impose certain coverage and device design challenges that need to be efficiently overcome. To this end, the development of cost- and energy-efficient approaches for scaling these networks to realistic scenarios constitute a necessity. Among the recent research trends contributing to these objectives belongs the technology of Reconfigurable Intelligent Surfaces (RISs). In fact, several high-level descriptions of THz systems based on RISs have been populating the literature. Nevertheless, hardware implementations of those systems are still very scarce, and not at the scale intended for most envisioned THz scenarios. In this paper, we overview some of the most significant hardware design and signal processing challenges with THz RISs, and present a preliminary analysis of their impact on the overall link budget and system performance, conducted in the framework of the ongoing TERRAMETA project. △ Less

Submitted 2 February, 2024; originally announced March 2024.

Comments: 5 pages, 7 figures, EuCAP 2024

Distributed Intelligent Integrated Sensing and Communications: The 6G-DISAC Approach

Authors: Emilio Calvanese Strinati, George C. Alexandropoulos, Madhusudan Giyyarpuram, Philippe Sehier, Sami Mekki, Vincenzo Sciancalepore, Maximilian Stark, Mohamed Sana, Benoit Denis, Maurizio Crozzoli, Navid Amani, Placido Mursia, Raffaele D Errico, Mauro Boldi, Francesca Costanzo, Francois Rivet, Henk Wymeerschx

Abstract: This paper introduces the concept of Distributed Intelligent integrated Sensing and Communications (DISAC), which expands the capabilities of Integrated Sensing and Communications (ISAC) towards distributed architectures. Additionally, the DISAC framework integrates novel waveform design with new semantic and goal-oriented communication paradigms, enabling ISAC technologies to transition from trad… ▽ More This paper introduces the concept of Distributed Intelligent integrated Sensing and Communications (DISAC), which expands the capabilities of Integrated Sensing and Communications (ISAC) towards distributed architectures. Additionally, the DISAC framework integrates novel waveform design with new semantic and goal-oriented communication paradigms, enabling ISAC technologies to transition from traditional data fusion to the semantic composition of diverse sensed and shared information. This progress facilitates large-scale, energy-efficient support for high-precision spatial-temporal processing, optimizing ISAC resource utilization, and enabling effective multi-modal sensing performance. Addressing key challenges such as efficient data management and connect-compute resource utilization, 6G- DISAC stands to revolutionize applications in diverse sectors including transportation, healthcare, and industrial automation. Our study encapsulates the project vision, methodologies, and potential impact, marking a significant stride towards a more connected and intelligent world. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: Submitted for conference publication

Reconfigurable Intelligent Surfaces for THz: Hardware Impairments and Switching Technologies

Authors: Sérgio Matos, Yihan Ma, Qi Luo, Jonas Deuermeier, Luca Lucci, Panagiotis Gavriilidis, Asal Kiazadeh, Verónica Lain-Rubio, Tung D. Phan, ** Jack Soh, Antonio Clemente, Luís M. Pessoa, George C. Alexandropoulos

Abstract: The demand for unprecedented performance in the upcoming 6G wireless networks is fomenting the research on THz communications empowered by Reconfigurable Inteligent Surfaces (RISs). A wide range of use cases have been proposed, most of them, assuming high-level RIS models that overlook some of the hardware impairments that this technology faces. The expectation is that the emergent reconfigurable… ▽ More The demand for unprecedented performance in the upcoming 6G wireless networks is fomenting the research on THz communications empowered by Reconfigurable Inteligent Surfaces (RISs). A wide range of use cases have been proposed, most of them, assuming high-level RIS models that overlook some of the hardware impairments that this technology faces. The expectation is that the emergent reconfigurable THz technologies will eventually overcome its current limitations. This disassociation from the hardware may mask nonphysical assumptions, perceived as hardware limitations. In this paper, a top-down approach bounded by physical constraints is presented, distilling from system-level specifications, hardware requirements, and upper bounds for the RIS-aided system performance. We consider D-band indoor and outdoor scenarios where a more realistic assessment of the state-of-the-art solution can be made. The goal is to highlight the intricacies of the design procedure based on sound assumptions for the RIS performance. For a given signal range and angular coverage, we quantify the required RIS size, number of switching elements, and maximum achievable bandwidth and capacity. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Comments: 6 pages, 6 figures, submitted for a conference presentation

Cooperative Backscatter Communications with Reconfigurable Intelligent Surfaces: An APSK Approach

Authors: Qiang Li, Yehuai Feng, Miaowen Wen, **ming Wen, George C. Alexandropoulos, Ertugrul Basar, H. Vincent Poor

Abstract: In this paper, a novel amplitude phase shift keying (APSK) modulation scheme for cooperative backscatter communications aided by a reconfigurable intelligent surface (RIS-CBC) is presented, according to which the RIS is configured to modulate backscatter information onto unmodulated or PSK-modulated signals im**ing on its surface via APSK. We consider both passive and active RISs, with the latte… ▽ More In this paper, a novel amplitude phase shift keying (APSK) modulation scheme for cooperative backscatter communications aided by a reconfigurable intelligent surface (RIS-CBC) is presented, according to which the RIS is configured to modulate backscatter information onto unmodulated or PSK-modulated signals im**ing on its surface via APSK. We consider both passive and active RISs, with the latter including an amplification unit at each reflecting element. In the passive (resp. active) RIS-CBC-APSK, backscatter information is conveyed through the number of RIS reflecting elements being on the ON state (resp. active mode) and their phase shift values. By using the optimal APSK constellation to ensure that reflected signals from the RIS undergo APSK modulation, a bit-map** mechanism is presented. Assuming maximum-likelihood detection, we also present closed-form upper bounds for the symbol error rate (SER) performance for both passive and active RIS-CBC-APSK schemes over Rician fading channels. In addition, we devise a low-complexity detector that can achieve flexible trade-offs between performance and complexity. Finally, we extend RIS-CBC-APSK to multiple-input single-output scenarios and present an alternating optimization approach for the joint design of transmit beamforming and RIS reflection. Our extensive simulation results on the SER performance corroborate our conducted performance analysis and showcase the superiority of the proposed RIS-CBC-APSK schemes over the state-of-the-art RIS-CBC benchmarks. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Comments: 13 pages, 9 figures, submitted to an IEEE Transactions Journal

Towards Distributed and Intelligent Integrated Sensing and Communications for 6G Networks

Authors: Emilio Calvanese Strinati, George C. Alexandropoulos, Navid Amani, Maurizio Crozzoli, Giyyarpuram Madhusudan, Sami Mekki, Francois Rivet, Vincenzo Sciancalepore, Philippe Sehier, Maximilian Stark, Henk Wymeersch

Abstract: This paper introduces the distributed and intelligent integrated sensing and communications (DISAC) concept, a transformative approach for 6G wireless networks that extends the emerging concept of integrated sensing and communications (ISAC). DISAC addresses the limitations of the existing ISAC models and, to overcome them, it introduces two novel foundational functionalities for both sensing and… ▽ More This paper introduces the distributed and intelligent integrated sensing and communications (DISAC) concept, a transformative approach for 6G wireless networks that extends the emerging concept of integrated sensing and communications (ISAC). DISAC addresses the limitations of the existing ISAC models and, to overcome them, it introduces two novel foundational functionalities for both sensing and communications: a distributed architecture and a semantic and goal-oriented framework. The distributed architecture enables large-scale and energy-efficient tracking of connected users and objects, leveraging the fusion of heterogeneous sensors. The semantic and goal-oriented intelligent and parsimonious framework, enables the transition from classical data fusion to the composition of semantically selected information, offering new paradigms for the optimization of resource utilization and exceptional multi-modal sensing performance across various use cases. This paper details DISAC's principles, architecture, and potential applications. △ Less

Submitted 18 February, 2024; originally announced February 2024.

Comments: Under review for possible publication in an IEEE Magazine

Multi-Agent Reinforcement Learning for Offloading Cellular Communications with Cooperating UAVs

Authors: Abhishek Mondal, Deepak Mishra, Ganesh Prasad, George C. Alexandropoulos, Azzam Alnahari, Riku Jantti

Abstract: Effective solutions for intelligent data collection in terrestrial cellular networks are crucial, especially in the context of Internet of Things applications. The limited spectrum and coverage area of terrestrial base stations pose challenges in meeting the escalating data rate demands of network users. Unmanned aerial vehicles, known for their high agility, mobility, and flexibility, present an… ▽ More Effective solutions for intelligent data collection in terrestrial cellular networks are crucial, especially in the context of Internet of Things applications. The limited spectrum and coverage area of terrestrial base stations pose challenges in meeting the escalating data rate demands of network users. Unmanned aerial vehicles, known for their high agility, mobility, and flexibility, present an alternative means to offload data traffic from terrestrial BSs, serving as additional access points. This paper introduces a novel approach to efficiently maximize the utilization of multiple UAVs for data traffic offloading from terrestrial BSs. Specifically, the focus is on maximizing user association with UAVs by jointly optimizing UAV trajectories and users association indicators under quality of service constraints. Since, the formulated UAVs control problem is nonconvex and combinatorial, this study leverages the multi agent reinforcement learning framework. In this framework, each UAV acts as an independent agent, aiming to maintain inter UAV cooperative behavior. The proposed approach utilizes the finite state Markov decision process to account for UAVs velocity constraints and the relationship between their trajectories and state space. A low complexity distributed state action reward state action algorithm is presented to determine UAVs optimal sequential decision making policies over training episodes. The extensive simulation results validate the proposed analysis and offer valuable insights into the optimal UAV trajectories. The derived trajectories demonstrate superior average UAV association performance compared to benchmark techniques such as Q learning and particle swarm optimization. △ Less

Submitted 31 May, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Comments: Significant modification required to get novel results

Reconfigurable Intelligent Computational Surfaces for MEC-Assisted Autonomous Driving Networks

Authors: Bo Yang, Xueyao Zhang, Zhiwen Yu, Xuelin Cao, Chongwen Huang, George C. Alexandropoulos, Yan Zhang, Merouane Debbah, Chau Yuen

Abstract: In this paper, we focus on improving autonomous driving safety via task offloading from cellular vehicles (CVs), using vehicle-to-infrastructure (V2I) links, to an multi-access edge computing (MEC) server. Considering that the frequencies used for V2I links can be reused for vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of each V2I link may suffer from sever… ▽ More In this paper, we focus on improving autonomous driving safety via task offloading from cellular vehicles (CVs), using vehicle-to-infrastructure (V2I) links, to an multi-access edge computing (MEC) server. Considering that the frequencies used for V2I links can be reused for vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of each V2I link may suffer from severe interference, causing outages in the task offloading process. To tackle this issue, we propose the deployment of a reconfigurable intelligent computational surface (RICS) to enable, not only V2I reflective links, but also interference cancellation at the V2V links exploiting the computational capability of its metamaterials. We devise a joint optimization formulation for the task offloading ratio between the CVs and the MEC server, the spectrum sharing strategy between V2V and V2I communications, as well as the RICS reflection and refraction matrices, with the objective to maximize a safety-based autonomous driving task. Due to the non-convexity of the problem and the coupling among its free variables, we transform it into a more tractable equivalent form, which is then decomposed into three sub-problems and solved via an alternate approximation method. Our simulation results demonstrate the effectiveness of the proposed RICS optimization in improving the safety in autonomous driving networks. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Secure ISAC MIMO Systems: Exploiting Interference With Bayesian Cramér-Rao Bound Optimization

Authors: Nanchi Su, Fan Liu, Christos Masouros, George C. Alexandropoulos, Yifeng Xiong, Qinyu Zhang

Abstract: In this paper, we present a signaling design for secure integrated sensing and communication (ISAC) systems comprising a dual-functional multi-input multi-output (MIMO) base station (BS) that simultaneously communicates with multiple users while detecting targets present in their vicinity, which are regarded as potential eavesdroppers. In particular, assuming that the distribution of each paramete… ▽ More In this paper, we present a signaling design for secure integrated sensing and communication (ISAC) systems comprising a dual-functional multi-input multi-output (MIMO) base station (BS) that simultaneously communicates with multiple users while detecting targets present in their vicinity, which are regarded as potential eavesdroppers. In particular, assuming that the distribution of each parameter to be estimated is known \textit{a priori}, we focus on optimizing the targets' sensing performance. To this end, we derive and minimize the Bayesian Cramér-Rao bound (BCRB), while ensuring certain communication quality of service (QoS) by exploiting constructive interference (CI). The latter scheme enforces that the received signals at the eavesdrop** targets fall into the destructive region of the signal constellation, to deteriorate their decoding probability, thus enhancing the ISAC's system physical-layer security (PLS) capability. To tackle the nonconvexity of the formulated problem, a tailored successive convex approximation method is proposed for its efficient solution. Our extensive numerical results verify the effectiveness of the proposed secure ISAC design showing that the proposed algorithm outperforms block-level precoding techniques. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: 6 pages, 4 figures, submitted for journal publication

Joint Near-Field Target Tracking and Communications with Full Duplex Holographic MIMO

Authors: Ioannis Gavras, George C. Alexandropoulos

Abstract: In this paper, we present a simultaneous target tracking and multi-user communications system realized by a full duplex holographic Multiple-Input Multiple-Output (MIMO) node equipped with Dynamic Metasurface Antennas (DMAs) at both its communication ends. Focusing on the near-field regime, we extend Fresnel's approximation to metasurfaces and devise a subspace tracking scheme with DMA-based hybri… ▽ More In this paper, we present a simultaneous target tracking and multi-user communications system realized by a full duplex holographic Multiple-Input Multiple-Output (MIMO) node equipped with Dynamic Metasurface Antennas (DMAs) at both its communication ends. Focusing on the near-field regime, we extend Fresnel's approximation to metasurfaces and devise a subspace tracking scheme with DMA-based hybrid Analog and Digital (A/D) reception as well as hybrid A/D transmission with a DMA for sum-rate maximization. The presented simulation results corroborate the efficiency of the proposed framework for various system parameters. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Comments: 5 pages, 3 figures, IEEE ICASSP 2024

Near-Field Localization with $1$-bit Quantized Hybrid A/D Reception

Authors: Ioannis Gavras, Italo Atzeni, George C. Alexandropoulos

Abstract: In this paper, we consider a hybrid Analog and Digital (A/D) receiver architecture with an extremely large Dynamic Metasurface Antenna (DMA) and an $1$-bit resolution Analog-to-Digital Converter (ADC) at each of its reception radio-frequency chains, and present a localization approach for User Equipment (UE) lying in its near-field regime. The proposed algorithm scans the UE area of interest to id… ▽ More In this paper, we consider a hybrid Analog and Digital (A/D) receiver architecture with an extremely large Dynamic Metasurface Antenna (DMA) and an $1$-bit resolution Analog-to-Digital Converter (ADC) at each of its reception radio-frequency chains, and present a localization approach for User Equipment (UE) lying in its near-field regime. The proposed algorithm scans the UE area of interest to identify the DMA-based analog combining configuration resulting to the peak in a received pseudo-spectrum, yielding the UE position estimation in three dimensions. Our simulation results demonstrate the validity of the proposed scheme, especially for increasing DMA sizes, and showcase the interplay among various system parameters. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Comments: 5 pages, 3 figures, IEEE ICASSP 2024

Far- versus Near-Field RIS Modeling and Beam Design

Authors: Mohamadreza Delbari, George C. Alexandropoulos, Robert Schober, Vahid Jamali

Abstract: In this chapter, we investigate the mathematical foundation of the modeling and design of reconfigurable intelligent surfaces (RIS) in both the far- and near-field regimes. More specifically, we first present RIS-assisted wireless channel models for the far- and near-field regimes, discussing relevant phenomena, such as line-of-sight (LOS) and non-LOS links, rich and poor scattering, channel corre… ▽ More In this chapter, we investigate the mathematical foundation of the modeling and design of reconfigurable intelligent surfaces (RIS) in both the far- and near-field regimes. More specifically, we first present RIS-assisted wireless channel models for the far- and near-field regimes, discussing relevant phenomena, such as line-of-sight (LOS) and non-LOS links, rich and poor scattering, channel correlation, and array manifold. Subsequently, we introduce two general approaches for the RIS reflective beam design, namely optimization-based and analytical, which offer different degrees of design flexibility and computational complexity. Furthermore, we provide a comprehensive set of simulation results for the performance evaluation of the studied RIS beam designs and the investigation of the impact of the system parameters. △ Less

Submitted 30 January, 2024; v1 submitted 16 January, 2024; originally announced January 2024.

Metasurface-Based Receivers with $1$-bit ADCs for Multi-User Uplink Communications

Authors: Panagiotis Gavriilidis, Italo Atzeni, George C. Alexandropoulos

Abstract: The massive Multiple-Input Multiple-Output (mMIMO) concept has been recently moving forward to extreme scales to address the envisioned requirements of next generation networks. However, the extension of conventional architectures will result in significant cost and power consumption. To this end, metasurface-based transceivers, consisting of microstrips of metamaterials, have recently emerged as… ▽ More The massive Multiple-Input Multiple-Output (mMIMO) concept has been recently moving forward to extreme scales to address the envisioned requirements of next generation networks. However, the extension of conventional architectures will result in significant cost and power consumption. To this end, metasurface-based transceivers, consisting of microstrips of metamaterials, have recently emerged as an efficient enabler of extreme mMIMO systems. In this paper, we consider metasurface-based receivers with a $1$-bit Analog-to-Digital Converter (ADC) per microstrip and develop an analytical framework for the optimization of the analog and digital combining matrices. Our numerical results, including comparisons with fully digital, infinite-resolution MIMO, provide useful insights into the role of various system parameters. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Comments: 5 pages, 3 figures, to be presented in IEEE ICASSP 2024

Joint 3D User and 6D Hybrid Reconfigurable Intelligent Surface Localization

Authors: Reza Ghazalian, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch, Riku Jäntti

Abstract: The latest assessments of the emerging technologies for reconfigurable intelligent surfaces (RISs) have indicated the concept's significant potential for localization and sensing, either as individual or simultaneously realized tasks. However, in the vast majority of those studies, the RIS state (i.e., its position and rotation angles) is required to be known a priori. In this paper, we address th… ▽ More The latest assessments of the emerging technologies for reconfigurable intelligent surfaces (RISs) have indicated the concept's significant potential for localization and sensing, either as individual or simultaneously realized tasks. However, in the vast majority of those studies, the RIS state (i.e., its position and rotation angles) is required to be known a priori. In this paper, we address the problem of the joint three-dimensional (3D) localization of a hybrid RIS (HRIS) and a user. The most cost- and power-efficient hybrid version of an RIS is equipped with a single reception radio-frequency chain and meta-atoms capable of simultaneous reconfigurable reflection and sensing. This dual functionality is controlled by adjustable power splitters embedded at each hybrid meta-atom. Focusing on a downlink scenario where a multi-antenna base station transmits multicarrier signals to a user via an HRIS, we propose a multistage approach to jointly estimate the metasurface's 3D position and 3D rotation matrix (i.e., 6D parameter estimation) as well as the user's 3D position. Our simulation results verify the validity of the proposed estimator via extensive comparisons of the root-mean-square error of the state estimations with the Cramér-Rao lower bound (CRB), which is analytically derived. Furthermore, it is showcased that there exists an optimal hybrid reconfigurable intelligent surface (HRIS) power splitting ratio for the desired multi-parameter estimation problem. We also study the robustness of the proposed method in the presence of scattering points in the wireless propagation environment. △ Less

Submitted 8 January, 2024; originally announced January 2024.

Comments: 14 pages, 6 figures, IEEE Transactions Journal

Reconfigurable Intelligent Surfaces for 6G: Emerging Hardware Architectures, Applications, and Open Challenges

Authors: Ertugrul Basar, George C. Alexandropoulos, Yuanwei Liu, Qingqing Wu, Shi **, Chau Yuen, Octavia A. Dobre, Robert Schober

Abstract: Reconfigurable intelligent surfaces (RISs) are rapidly gaining prominence in the realm of fifth generation (5G)-Advanced, and predominantly, sixth generation (6G) mobile networks, offering a revolutionary approach to optimizing wireless communications. This article delves into the intricate world of the RIS technology, exploring its diverse hardware architectures and the resulting versatile operat… ▽ More Reconfigurable intelligent surfaces (RISs) are rapidly gaining prominence in the realm of fifth generation (5G)-Advanced, and predominantly, sixth generation (6G) mobile networks, offering a revolutionary approach to optimizing wireless communications. This article delves into the intricate world of the RIS technology, exploring its diverse hardware architectures and the resulting versatile operating modes. These include RISs with signal reception and processing units, sensors, amplification units, transmissive capability, multiple stacked components, and dynamic metasurface antennas. Furthermore, we shed light on emerging RIS applications, such as index and reflection modulation, non-coherent modulation, next generation multiple access, integrated sensing and communications (ISAC), energy harvesting, as well as aerial and vehicular networks. These exciting applications are set to transform the way we will wirelessly connect in the upcoming era of 6G. Finally, we review recent experimental RIS setups and present various open problems of the overviewed RIS hardware architectures and their applications. From enhancing network coverage to enabling new communication paradigms, RIS-empowered connectivity is poised to play a pivotal role in sha** the future of wireless networking. This article unveils the underlying principles and potential impacts of RISs, focusing on cutting-edge developments of this physical-layer smart connectivity technology. △ Less

Submitted 14 June, 2024; v1 submitted 28 December, 2023; originally announced December 2023.

Comments: 18 pages, 15 figures, 54 references, and an extended archival version of an invited and accepted article from IEEE Vehicular Technology Magazine

Journal ref: IEEE Vehicular Technology Magazine, 2024

Jointly Optimal RIS Placement and Power Allocation for Underlay D2D Communications: An Outage Probability Minimization Approach

Authors: Sarbani Ghose, Deepak Mishra, Santi P. Maity, George C. Alexandropoulos

Abstract: In this paper, we study underlay device-to-device (D2D) communication systems empowered by a reconfigurable intelligent surface (RIS) for cognitive cellular networks. Considering Rayleigh fading channels and the general case where there exist both the direct and RIS-enabled D2D channels, the outage probability (OP) of the D2D communication link is presented in closed-form. Next, for the considered… ▽ More In this paper, we study underlay device-to-device (D2D) communication systems empowered by a reconfigurable intelligent surface (RIS) for cognitive cellular networks. Considering Rayleigh fading channels and the general case where there exist both the direct and RIS-enabled D2D channels, the outage probability (OP) of the D2D communication link is presented in closed-form. Next, for the considered RIS-empowered underlaid D2D system, we frame an OP minimization problem. We target the joint optimization of the transmit power at the D2D source and the RIS placement, under constraints on the transmit power at the D2D source and on the limited interference imposed on the cellular user for two RIS deployment topologies. Due to the coupled optimization variables, the formulated optimization problem is extremely intractable. We propose an equivalent transformation which we are able to solve analytically. In the transformed problem, an expression for the average value of the signal-to-interference-noise ratio (SINR) at the D2D receiver is derived in closed-form. Our theoretical derivations are corroborated through simulation results, and various system design insights are deduced. It is indicatively showcased that the proposed RIS-empowered underlaid D2D system design outperforms the benchmark semi-adaptive optimal power and optimal distance schemes, offering $44\%$ and $20\%$ performance improvement, respectively. △ Less

Submitted 7 January, 2024; v1 submitted 21 December, 2023; originally announced December 2023.

Power Minimizing MEC Offloading with QoS Constraints over RIS-Empowered Communications

Authors: Mattia Merluzzi, Francesca Costanzo, Konstantinos D. Katsanos, George C. Alexandropoulos, Paolo Di Lorenzo

Abstract: This work lies at the intersection of two cutting edge technologies envisioned to proliferate in future 6G wireless systems: Multi-access Edge Computing (MEC) and Reconfigurable Intelligent Surfaces (RISs). While the former will bring a powerful information technology environment at the wireless edge, the latter will enhance communication performance, thanks to the possibility of adapting wireless… ▽ More This work lies at the intersection of two cutting edge technologies envisioned to proliferate in future 6G wireless systems: Multi-access Edge Computing (MEC) and Reconfigurable Intelligent Surfaces (RISs). While the former will bring a powerful information technology environment at the wireless edge, the latter will enhance communication performance, thanks to the possibility of adapting wireless propagation as per end users' convenience, according to specific service requirements. We propose a joint optimization of radio, computing, and wireless environment reconfiguration through an RIS, with the goal of enabling low power computation offloading services with reliability guarantees. Going beyond previous works on this topic, multi-carrier frequency selective RIS elements' responses and wireless channels are considered. This opens new challenges in RIS optimization, accounting for frequency dependent RIS response profiles, which strongly affect RIS-aided wireless links and, as a consequence, MEC service performance. We formulate an optimization problem accounting for short and long-term constraints involving device transmit power allocation across multiple subcarriers and local computing resources, as well as RIS reconfiguration parameters according to a recently developed Lorentzian model. Besides a theoretical optimization framework, numerical results show the effectiveness of the proposed method in enabling low power reliable computation offloading over RIS-aided frequency selective channels. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Comments: IEEE GLOBECOM 2022

Autoregressive Attention Neural Networks for Non-Line-of-Sight User Tracking with Dynamic Metasurface Antennas

Authors: Kyriakos Stylianopoulos, Murat Bayraktar, Nuria González Prelcic, George C. Alexandropoulos

Abstract: User localization and tracking in the upcoming generation of wireless networks have the potential to be revolutionized by technologies such as the Dynamic Metasurface Antennas (DMAs). Commonly proposed algorithmic approaches rely on assumptions about relatively dominant Line-of-Sight (LoS) paths, or require pilot transmission sequences whose length is comparable to the number of DMA elements, thus… ▽ More User localization and tracking in the upcoming generation of wireless networks have the potential to be revolutionized by technologies such as the Dynamic Metasurface Antennas (DMAs). Commonly proposed algorithmic approaches rely on assumptions about relatively dominant Line-of-Sight (LoS) paths, or require pilot transmission sequences whose length is comparable to the number of DMA elements, thus, leading to limited effectiveness and considerable measurement overheads in blocked LoS and dynamic multipath environments. In this paper, we present a two-stage machine-learning-based approach for user tracking, specifically designed for non-LoS multipath settings. A newly proposed attention-based Neural Network (NN) is first trained to map noisy channel responses to potential user positions, regardless of user mobility patterns. This architecture constitutes a modification of the prominent vision transformer, specifically modified for extracting information from high-dimensional frequency response signals. As a second stage, the NN's predictions for the past user positions are passed through a learnable autoregressive model to exploit the time-correlated channel information and obtain the final position predictions. The channel estimation procedure leverages a DMA receive architecture with partially-connected radio frequency chains, which results to reduced numbers of pilots. The numerical evaluation over an outdoor ray-tracing scenario illustrates that despite LoS blockage, this methodology is capable of achieving high position accuracy across various multipath settings. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: 5 pages, 3 figures, accepted for presentation by 2023 IEEE International Workshop on Computational Advances in Multi-Sensor Adaptive Processing (CAMSAP 2023)

Time-Domain Channel Estimation for Extremely Large MIMO THz Communications with Beam Squint

Authors: Evangelos Vlachos, Aryan Kaushik, Yonina C. Eldar, George C. Alexandropoulos

Abstract: In this paper, we study the problem of extremely large (XL) multiple-input multiple-output (MIMO) channel estimation in the Terahertz (THz) frequency band, considering the presence of propagation delays across the entire array apertures, which leads to frequency selectivity, a problem known as beam squint. Multi-carrier transmission schemes which are usually deployed to address this problem, suffe… ▽ More In this paper, we study the problem of extremely large (XL) multiple-input multiple-output (MIMO) channel estimation in the Terahertz (THz) frequency band, considering the presence of propagation delays across the entire array apertures, which leads to frequency selectivity, a problem known as beam squint. Multi-carrier transmission schemes which are usually deployed to address this problem, suffer from high peak-to-average power ratio, which is specifically dominant in THz communications where low transmit power is realized. Diverging from the usual approach, we devise a novel channel estimation problem formulation in the time domain for single-carrier (SC) modulation, which favors transmissions in THz, and incorporate the beam-squint effect in a sparse vector recovery problem that is solved via sparse optimization tools. In particular, the beam squint and the sparse MIMO channel are jointly tracked by using an alternating minimization approach that decomposes the two estimation problems. The presented performance evaluation results validate that the proposed SC technique exhibits superior performance than the conventional one as well as than state-of-the-art multi-carrier approaches. △ Less

Submitted 23 October, 2023; originally announced October 2023.

On the Performance Analysis of RIS-Empowered Communications Over Nakagami-m Fading

Authors: Dimitris Selimis, Kostas P. Peppas, George C. Alexandropoulos, Fotis I. Lazarakis

Abstract: In this paper, we study the performance of wireless communications empowered by Reconfigurable Intelligent Surface (RISs) over Nakagami-m fading channels. We consider two phase configuration designs for the RIS, one random and another one based on coherent phase shifting. For both phase configuration cases, we present single-integral expressions for the outage probability and the bit error rate of… ▽ More In this paper, we study the performance of wireless communications empowered by Reconfigurable Intelligent Surface (RISs) over Nakagami-m fading channels. We consider two phase configuration designs for the RIS, one random and another one based on coherent phase shifting. For both phase configuration cases, we present single-integral expressions for the outage probability and the bit error rate of binary modulation schemes, which can be efficiently evaluated numerically. In addition, we propose accurate closed-form approximations for the ergodic capacity of the considered system. For all considered metrics, we have also derived simple analytical expressions that become tight for large numbers of RIS reflecting elements. Numerically evaluated results compared with Monte Carlo simulations are presented in order to verify the correctness of the proposed analysis and showcase the impact of various system settings. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Journal ref: IEEE Communications Letters, 2021, Volume 25 Issue 7, Pages 2191-2195

Massive Access of Static and Mobile Users via Reconfigurable Intelligent Surfaces: Protocol Design and Performance Analysis

Authors: Xuelin Cao, Bo Yang, Chongwen Huang, George C. Alexandropoulos, Chau Yuen, Zhu Han, H. Vincent Poor, Lajos Hanzo

Abstract: The envisioned wireless networks of the future entail the provisioning of massive numbers of connections, heterogeneous data traffic, ultra-high spectral efficiency, and low latency services. This vision is spurring research activities focused on defining a next generation multiple access (NGMA) protocol that can accommodate massive numbers of users in different resource blocks, thereby, achieving… ▽ More The envisioned wireless networks of the future entail the provisioning of massive numbers of connections, heterogeneous data traffic, ultra-high spectral efficiency, and low latency services. This vision is spurring research activities focused on defining a next generation multiple access (NGMA) protocol that can accommodate massive numbers of users in different resource blocks, thereby, achieving higher spectral efficiency and increased connectivity compared to conventional multiple access schemes. In this article, we present a multiple access scheme for NGMA in wireless communication systems assisted by multiple reconfigurable intelligent surfaces (RISs). In this regard, considering the practical scenario of static users operating together with mobile ones, we first study the interplay of the design of NGMA schemes and RIS phase configuration in terms of efficiency and complexity. Based on this, we then propose a multiple access framework for RIS-assisted communication systems, and we also design a medium access control (MAC) protocol incorporating RISs. In addition, we give a detailed performance analysis of the designed RIS-assisted MAC protocol. Our extensive simulation results demonstrate that the proposed MAC design outperforms the benchmarks in terms of system throughput and access fairness, and also reveal a trade-off relationship between the system throughput and fairness. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Iterative Interference Cancellation for Time Reversal Division Multiple Access

Authors: Ali Mokh, George C. Alexandropoulos, Mohamed Kamoun, Abdelwaheb Ourir, Arnaud Tourin, Mathias Fink, Julien de Rosny

Abstract: Time Reversal (TR) has been proposed as a competitive precoding strategy for low-complexity devices, relying on ultra-wideband waveforms. This transmit processing paradigm can address the need for low power and low complexity receivers, which is particularly important for the Internet of Things, since it shifts most of the communications signal processing complexity to the transmitter side. Due to… ▽ More Time Reversal (TR) has been proposed as a competitive precoding strategy for low-complexity devices, relying on ultra-wideband waveforms. This transmit processing paradigm can address the need for low power and low complexity receivers, which is particularly important for the Internet of Things, since it shifts most of the communications signal processing complexity to the transmitter side. Due to its spatio-temporal focusing property, TR has also been used to design multiple access schemes for multi-user communications scenarios. However, in wideband time-division multiple access schemes, the signals received by users suffer from significant levels of inter-symbol interference as well as interference from uncoordinated users, which often require additional processing at the receiver side. This paper proposes an iterative TR scheme that aims to reduce the level of interference in wideband multi-user settings, while kee** the processing complexity only at the transmitter side. The performance of the proposed TR-based protocol is evaluated using analytical derivations. In addition, its superiority over the conventional Time Reversal Division Multiple Access (TRDMA) scheme is demonstrated through simulations as well as experimental measurements at $2.5$ GHz carrier frequency with variable bandwidth values. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 7 pages, 8 figures, published in an IEEE Journal

Spatial Secrecy Spectral Efficiency Optimization Enabled by Reconfigurable Intelligent Surfaces

Authors: Konstantinos D. Katsanos, George C. Alexandropoulos

Abstract: Reconfigurable Intelligent Surfaces (RISs) constitute a strong candidate physical-layer technology for the $6$-th Generation (6G) of wireless networks, offering new design degrees of freedom for efficiently addressing demanding performance objectives. In this paper, we consider a Multiple-Input Single-Output (MISO) physical-layer security system incorporating a reflective RIS to safeguard wireless… ▽ More Reconfigurable Intelligent Surfaces (RISs) constitute a strong candidate physical-layer technology for the $6$-th Generation (6G) of wireless networks, offering new design degrees of freedom for efficiently addressing demanding performance objectives. In this paper, we consider a Multiple-Input Single-Output (MISO) physical-layer security system incorporating a reflective RIS to safeguard wireless communications between a legitimate transmitter and receiver under the presence of an eavesdropper. In contrast to current studies optimizing RISs for given positions of the legitimate and eavesdrop** nodes, in this paper, we focus on devising RIS-enabled secrecy for given geographical areas of potential nodes' placement. We propose a novel secrecy metric, capturing the spatially averaged secrecy spectral efficiency, and present a joint design of the transmit digital beamforming and the RIS analog phase profile, which is realized via a combination of alternating optimization and minorization-maximization. The proposed framework bypasses the need for instantaneous knowledge of the eavesdropper's channel or position, and targets providing an RIS-boosted secure area of legitimate communications with a single configuration of the free parameters. Our simulation results showcase significant performance gains with the proposed secrecy scheme, even for cases where the eavesdropper shares similar pathloss attenuation with the legitimate receiver. △ Less

Submitted 19 June, 2023; originally announced June 2023.

Comments: to be presented in EUSIPCO 2023

Full-Duplex-Enabled Joint Communications and Sensing with Reconfigurable Intelligent Surfaces

Authors: Chandan Kumar Sheemar, George C. Alexandropoulos, Dirk Slock, Jorge Querol, Symeon Chatzinotas

Abstract: The full-duplex (FD) technology has the potential to radically evolve wireless systems, facilitating the integration of both communications and radar functionalities into a single device, thus, enabling joint communication and sensing (JCAS). In this paper, we present a novel approach for JCAS that incorporates a reconfigurable intelligent surface (RIS) in the near-field of an FD multiple-input mu… ▽ More The full-duplex (FD) technology has the potential to radically evolve wireless systems, facilitating the integration of both communications and radar functionalities into a single device, thus, enabling joint communication and sensing (JCAS). In this paper, we present a novel approach for JCAS that incorporates a reconfigurable intelligent surface (RIS) in the near-field of an FD multiple-input multiple-output (MIMO) node, which is jointly optimized with the digital beamformers to enable JSAC and efficiently handle self-interference (SI). We propose a novel problem formulation for FD MIMO JCAS systems to jointly minimize the total received power at the FD node's radar receiver while maximizing the sum rate of downlink communications subject to a Cramér-Rao bound (CRB) constraint. In contrast to the typically used CRB in the relevant literature, we derive a novel, more accurate, target estimation bound that fully takes into account the RIS deployment. The considered problem is solved using alternating optimization, which is guaranteed to converge to a local optimum. The simulation results demonstrate that the proposed scheme achieves significant performance improvement both for communications and sensing. It is showcased that, jointly designing the FD MIMO beamformers and the RIS phase configuration to be SI aware can significantly loosen the requirement for additional SI cancellation. △ Less

Submitted 19 June, 2023; originally announced June 2023.

Lyapunov-Driven Deep Reinforcement Learning for Edge Inference Empowered by Reconfigurable Intelligent Surfaces

Authors: Kyriakos Stylianopoulos, Mattia Merluzzi, Paolo Di Lorenzo, George C. Alexandropoulos

Abstract: In this paper, we propose a novel algorithm for energy-efficient, low-latency, accurate inference at the wireless edge, in the context of 6G networks endowed with reconfigurable intelligent surfaces (RISs). We consider a scenario where new data are continuously generated/collected by a set of devices and are handled through a dynamic queueing system. Building on the marriage between Lyapunov stoch… ▽ More In this paper, we propose a novel algorithm for energy-efficient, low-latency, accurate inference at the wireless edge, in the context of 6G networks endowed with reconfigurable intelligent surfaces (RISs). We consider a scenario where new data are continuously generated/collected by a set of devices and are handled through a dynamic queueing system. Building on the marriage between Lyapunov stochastic optimization and deep reinforcement learning (DRL), we devise a dynamic learning algorithm that jointly optimizes the data compression scheme, the allocation of radio resources (i.e., power, transmission precoding), the computation resources (i.e., CPU cycles), and the RIS reflectivity parameters (i.e., phase shifts), with the aim of performing energy-efficient edge classification with end-to-end (E2E) delay and inference accuracy constraints. The proposed strategy enables dynamic control of the system and of the wireless propagation environment, performing a low-complexity optimization on a per-slot basis while dealing with time-varying radio channels and task arrivals, whose statistics are unknown. Numerical results assess the performance of the proposed RIS-empowered edge inference strategy in terms of trade-off between energy, delay, and accuracy of a classification task. △ Less

Submitted 18 May, 2023; originally announced May 2023.

Journal ref: 2023 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), Rhodes Island, Greece, 2023, pp. 1-5

Stacked Intelligent Metasurfaces for Efficient Holographic MIMO Communications in 6G

Authors: Jiancheng An, Chao Xu, Derrick Wing Kwan Ng, George C. Alexandropoulos, Chongwen Huang, Chau Yuen, Lajos Hanzo

Abstract: The revolutionary technology of \emph{Stacked Intelligent Metasurfaces (SIM)} has been recently shown to be capable of carrying out advanced signal processing directly in the native electromagnetic (EM) wave domain. An SIM is fabricated by a sophisticated amalgam of multiple stacked metasurface layers, which may outperform its single-layer metasurface counterparts, such as reconfigurable intellige… ▽ More The revolutionary technology of \emph{Stacked Intelligent Metasurfaces (SIM)} has been recently shown to be capable of carrying out advanced signal processing directly in the native electromagnetic (EM) wave domain. An SIM is fabricated by a sophisticated amalgam of multiple stacked metasurface layers, which may outperform its single-layer metasurface counterparts, such as reconfigurable intelligent surfaces (RISd) and metasurface lenses. We harness this new SIM concept for implementing efficient holographic multiple-input multiple-output (HMIMO) communications that dot require excessive radio-frequency (RF) chains, which constitutes a substantial benefit compared to existing implementations. We first present an HMIMO communication system based on a pair of SIMs at the transmitter (TX) and receiver (RX), respectively. In sharp contrast to the conventional MIMO designs, the considered SIMs are capable of automatically accomplishing transmit precoding and receiver combining, as the EM waves propagate through them. As such, each information data stream can be directly radiated and recovered from the corresponding transmit and receive ports. Secondly, we formulate the problem of minimizing the error between the actual end-to-end SIMs'parametrized channel matrix and the target diagonal one, with the latter representing a flawless interference-free system of parallel subchannels. This is achieved by jointly optimizing the phase shifts associated with all the metasurface layers of both the TX-SIM and RX-SIM. We then design a gradient descent algorithm to solve the resultant non-convex problem. Furthermore, we theoretically analyze the HMIMO channel capacity bound and provide some useful fundamental insights. Extensive simulation results are provided for characterizing our SIM-based HMIMO system, quantifying its substantial performance benefits. △ Less

Submitted 14 May, 2023; originally announced May 2023.

Comments: 17 pages, 17 figures, 1 table, accepted by IEEE JSAC

WiThRay: A Versatile Ray-Tracing Simulator for Smart Wireless Environments

Authors: Hyuck** Choi, Jaehoon Chung, Jaeky Oh, George C. Alexandropoulos, Junil Choi

Abstract: This paper presents the development and evaluation of WiThRay, a new wireless three-dimensional ray-tracing (RT) simulator. RT-based simulators are widely used for generating realistic channel data by combining RT methodology to get signal trajectories and electromagnetic (EM) equations, resulting in generalized channel impulse responses (CIRs). This paper first provides a comprehensive comparison… ▽ More This paper presents the development and evaluation of WiThRay, a new wireless three-dimensional ray-tracing (RT) simulator. RT-based simulators are widely used for generating realistic channel data by combining RT methodology to get signal trajectories and electromagnetic (EM) equations, resulting in generalized channel impulse responses (CIRs). This paper first provides a comprehensive comparison on methodologies of existing RT-based simulators. We then introduce WiThRay, which can evaluate the performance of various wireless communication techniques such as channel estimation/tracking, beamforming, and localization in realistic EM wave propagation. WiThRay implements its own RT methodology, the bypassing on edge (BE) algorithm, that follows the Fermat's principle and has low computational complexity. The scattering ray calibration in WiThRay also provides a precise solution in the analysis of EM propagation. Different from most of the previous RT-based simulators, WiThRay incorporates reconfigurable intelligent surfaces (RIS), which will be a key component of future wireless communications. We thoroughly show that the channel data from WiThRay match sufficiently well with the fundamental theory of wireless channels. The virtue of WiThRay lies in its feature of not making any assumption about the channel, like being slow/fast fading or frequency selective. A realistic wireless environment, which can be conveniently simulated via WiThRay, naturally defines the physical properties of the wireless channels. WiThRay is open to the public, and anyone can exploit this versatile simulator to develop and test their communications and signal processing techniques. △ Less

Submitted 22 April, 2023; originally announced April 2023.

Comments: 23 pages, 25 figures, submitted to IEEE Access

Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges

Authors: Besma Smida, Ashutosh Sabharwal, Gabor Fodor, George C. Alexandropoulos, Himal A. Suraweera, Chan-Byoung Chae

Abstract: The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band F… ▽ More The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band FD has advanced from being demonstrated in research labs to being implemented in standards, presenting new opportunities to utilize its foundational concepts. Some of the most significant opportunities include using FD to enable wireless networks to sense the physical environment, integrate sensing and communication applications, develop integrated access and backhaul solutions, and work with smart signal propagation environments powered by reconfigurable intelligent surfaces. However, these new opportunities also come with new challenges for large-scale commercial deployment of FD technology, such as managing self-interference, combating cross-link interference in multi-cell networks, and coexistence of dynamic time division duplex, subband FD and FD networks. △ Less

Submitted 24 April, 2023; v1 submitted 18 April, 2023; originally announced April 2023.

Comments: 21 pages, 15 figures, accepted to an IEEE Journal

On the Impact of Control Signaling in RIS-Empowered Wireless Communications

Authors: Fabio Saggese, Victor Croisfelt, Radosław Kotaba, Kyriakos Stylianopoulos, George C. Alexandropoulos, Petar Popovski

Abstract: The research on Reconfigurable Intelligent Surfaces (RISs) has dominantly been focused on physical-layer aspects and analyses of the achievable adaptation of the wireless propagation environment. Compared to that, questions related to system-level integration of RISs have received less attention. We address this research gap by analyzing the necessary control/signaling operations that are necessar… ▽ More The research on Reconfigurable Intelligent Surfaces (RISs) has dominantly been focused on physical-layer aspects and analyses of the achievable adaptation of the wireless propagation environment. Compared to that, questions related to system-level integration of RISs have received less attention. We address this research gap by analyzing the necessary control/signaling operations that are necessary to integrate RIS as a new type of wireless infrastructure element. We build a general model for evaluating the impact of control operations along two dimensions: i) the allocated bandwidth of the control channels (in-band and out-of-band), and ii) the rate selection for the data channel (multiplexing or diversity). Specifically, the second dimension results in two generic transmission schemes, one based on channel estimation and the subsequent optimization of the RIS, while the other is based on swee** through predefined RIS phase configurations. We analyze the communication performance in multiple setups built along these two dimensions. While necessarily simplified, our analysis reveals the basic trade-offs in RIS-assisted communication and the associated control operations. The main contribution of the paper is a methodology for systematic evaluation of the control overhead in RIS-aided networks, regardless of the specific control schemes used. △ Less

Submitted 30 October, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Comments: Submitted to IEEE TWC, the copyright may be transferred without further notice

Robust mmWave Beamforming by Self-Supervised Hybrid Deep Learning

Authors: Fenghao Zhu, Bohao Wang, Zhaohui Yang, Chongwen Huang, Zhaoyang Zhang, George C. Alexandropoulos, Chau Yuen, Merouane Debbah

Abstract: Beamforming with large-scale antenna arrays has been widely used in recent years, which is acknowledged as an important part in 5G and incoming 6G. Thus, various techniques are leveraged to improve its performance, e.g., deep learning, advanced optimization algorithms, etc. Although its performance in many previous research scenarios with deep learning is quite attractive, usually it drops rapidly… ▽ More Beamforming with large-scale antenna arrays has been widely used in recent years, which is acknowledged as an important part in 5G and incoming 6G. Thus, various techniques are leveraged to improve its performance, e.g., deep learning, advanced optimization algorithms, etc. Although its performance in many previous research scenarios with deep learning is quite attractive, usually it drops rapidly when the environment or dataset is changed. Therefore, designing effective beamforming network with strong robustness is an open issue for the intelligent wireless communications. In this paper, we propose a robust beamforming self-supervised network, and verify it in two kinds of different datasets with various scenarios. Simulation results show that the proposed self-supervised network with hybrid learning performs well in both classic DeepMIMO and new WAIR-D dataset with the strong robustness under the various environments. Also, we present the principle to explain the rationality of this kind of hybrid learning, which is instructive to apply with more kinds of datasets. △ Less

Submitted 2 August, 2023; v1 submitted 9 March, 2023; originally announced March 2023.

RIS-Enabled Smart Wireless Environments: Deployment Scenarios, Network Architecture, Bandwidth and Area of Influence

Authors: George C. Alexandropoulos, Dinh-Thuy Phan-Huy, Kostantinos D. Katsanos, Maurizio Crozzoli, Henk Wymeersch, Petar Popovski, Philippe Ratajczak, Yohann Bénédic, Marie-Helene Hamon, Sebastien Herraiz Gonzalez, Placido Mursia, Marco Rossanese, Vincenzo Sciancalepore, Jean-Baptiste Gros, Sergio Terranova, Gabriele Gradoni, Paolo Di Lorenzo, Moustafa Rahal, Benoit Denis, Raffaele D'Errico, Antonio Clemente, Emilio Calvanese Strinati

Abstract: Reconfigurable Intelligent Surfaces (RISs) constitute the key enabler for programmable electromagnetic propagation environments, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless networks. In this paper, we first present the deployment scenarios for RIS-enab… ▽ More Reconfigurable Intelligent Surfaces (RISs) constitute the key enabler for programmable electromagnetic propagation environments, and are lately being considered as a candidate physical-layer technology for the demanding connectivity, reliability, localization, and sustainability requirements of next generation wireless networks. In this paper, we first present the deployment scenarios for RIS-enabled smart wireless environments that have been recently designed within the ongoing European Union Horizon 2020 RISE-6G project, as well as a network architecture integrating RISs with existing standardized interfaces. We identify various RIS deployment strategies and sketch the core architectural requirements in terms of RIS control and signaling, depending on the RIS hardware architectures and respective capabilities. Furthermore, we introduce and discuss, with the aid of simulations and reflectarray measurements, two novel metrics that emerge in the context of RIS-empowered wireless systems: the RIS bandwidth and area of influence. Their extensive investigation corroborates the need for careful deployment and planning of the RIS technology in future networks. △ Less

Submitted 15 March, 2023; originally announced March 2023.

Comments: 43 pages, 21 figures, sumbitted for a journal publication. arXiv admin note: text overlap with arXiv:2203.13478

Full Duplex Holographic MIMO for Near-Field Integrated Sensing and Communications

Authors: Ioannis Gavras, Md Atiqul Islam, Besma Smida, George C. Alexandropoulos

Abstract: This paper presents an in-band Full Duplex (FD) integrated sensing and communications system comprising a holographic Multiple-Input Multiple-Output (MIMO) base station, which is capable to simultaneously communicate with multiple users in the downlink direction, while sensing targets being randomly distributed within its coverage area. Considering near-field wireless operation at THz frequencies,… ▽ More This paper presents an in-band Full Duplex (FD) integrated sensing and communications system comprising a holographic Multiple-Input Multiple-Output (MIMO) base station, which is capable to simultaneously communicate with multiple users in the downlink direction, while sensing targets being randomly distributed within its coverage area. Considering near-field wireless operation at THz frequencies, the FD node adopts dynamic metasurface antenna panels for both transmission and reception, which consist of massive numbers of sub-wavelength-spaced metamaterials, enabling reduced cost and power consumption analog precoding and combining. We devise an optimization framework for the FD node's reconfigurable parameters with the dual objective of maximizing the targets' parameters estimation accuracy and the downlink communication performance. Our simulation results verify the integrated sensing and communications capability of the proposed FD holographic MIMO system, showcasing the interplays among its various design parameters. △ Less

Submitted 7 August, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Comments: 5 pages, 3 figures, EUSIPCO 2023

Indexed Multiple Access with Reconfigurable Intelligent Surfaces: The Reflection Tuning Potential

Authors: Rohit Singh, Aryan Kaushik, Wonjae Shin, George C. Alexandropoulos, Mesut Toka, Marco Di Renzo

Abstract: Indexed modulation (IM) is an evolving technique that has become popular due to its ability of parallel data communication over distinct combinations of transmission entities. In this article, we first provide a comprehensive survey of IM-enabled multiple access (MA) techniques, emphasizing the shortcomings of existing non-indexed MA schemes. Theoretical comparisons are presented to show how the n… ▽ More Indexed modulation (IM) is an evolving technique that has become popular due to its ability of parallel data communication over distinct combinations of transmission entities. In this article, we first provide a comprehensive survey of IM-enabled multiple access (MA) techniques, emphasizing the shortcomings of existing non-indexed MA schemes. Theoretical comparisons are presented to show how the notion of indexing eliminates the limitations of non-indexed solutions. We also discuss the benefits that the utilization of a reconfigurable intelligent surface (RIS) can offer when deployed as an indexing entity. In particular, we propose an RIS-indexed multiple access (RIMA) transmission scheme that utilizes dynamic phase tuning to embed multi-user information over a single carrier. The performance of the proposed RIMA is assessed in light of simulation results that confirm its performance gains. The article further includes a list of relevant open technical issues and research directions. △ Less

Submitted 15 February, 2023; originally announced February 2023.

Comments: 7 pages, 5 figures, 1 table

Channel Modeling and Multi-User Precoding for Tri-Polarized Holographic MIMO Communications

Authors: Li Wei, Chongwen Huang, George C. Alexandropoulos, Zhaohui Yang, Jun Yang, Wei E. I. Sha, Merouane Debbah, Chau Yuen

Abstract: This paper studies the exploitation of triple polarization (TP) for multi-user (MU) holographic multiple-input multiple-output surface (HMIMOS) wireless communication systems, aiming at capacity boosting without enlarging the antenna array size. We specifically consider that both the transmitter and receiver are equipped with an HMIMOS comprising compact sub-wavelength TP patch antennas. To charac… ▽ More This paper studies the exploitation of triple polarization (TP) for multi-user (MU) holographic multiple-input multiple-output surface (HMIMOS) wireless communication systems, aiming at capacity boosting without enlarging the antenna array size. We specifically consider that both the transmitter and receiver are equipped with an HMIMOS comprising compact sub-wavelength TP patch antennas. To characterize TP MUHMIMOS systems, a TP near-field channel model is proposed using the dyadic Green's function, whose characteristics are leveraged to design a user-cluster-based precoding scheme for mitigating the cross-polarization and inter-user interference contributions. A theoretical correlation analysis for HMIMOS with infinitely small patch antennas is also presented. According to the proposed scheme, the users are assigned to one of the three polarizations, which is easy to implement, at the cost, however, of reducing the system's diversity. Our numerical results showcase that the cross-polarization channel components have a nonnegligible impact on the system performance, which is efficiently eliminated with the proposed MU precoding scheme. △ Less

Submitted 10 February, 2023; originally announced February 2023.

Comments: arXiv admin note: substantial text overlap with arXiv:2211.03479

On the Tacit Linearity Assumption in Common Cascaded Models of RIS-Parametrized Wireless Channels

Authors: Antonin Rabault, Luc Le Magoarou, Jérôme Sol, George C. Alexandropoulos, Nir Shlezinger, H. Vincent Poor, Philipp del Hougne

Abstract: We analytically derive from first physical principles the functional dependence of wireless channels on the RIS configuration for generic (i.e., potentially complex-scattering) RIS-parametrized radio environments. The wireless channel is a linear input-output relation that depends non-linearly on the RIS configuration because of two independent mechanisms: i) proximity-induced mutual coupling betw… ▽ More We analytically derive from first physical principles the functional dependence of wireless channels on the RIS configuration for generic (i.e., potentially complex-scattering) RIS-parametrized radio environments. The wireless channel is a linear input-output relation that depends non-linearly on the RIS configuration because of two independent mechanisms: i) proximity-induced mutual coupling between close-by RIS elements; ii) reverberation-induced long-range coupling between all RIS elements. Mathematically, this "structural" non-linearity originates from the inversion of an "interaction" matrix that can be cast as the sum of an infinite Born series [for i)] or Born-like series [for ii)] whose $K$th term physically represents paths involving $K$ bounces between the RIS elements [for i)] or wireless entities [for ii)]. We identify the key physical parameters that determine whether these series can be truncated after the first and second term, respectively, as tacitly done in common cascaded models of RIS-parametrized wireless channels. Numerical results obtained with the physics-compliant PhysFad model and experimental results obtained with a RIS prototype in an anechoic (echo-free) chamber and rich-scattering reverberation chambers corroborate our analysis. Our findings raise doubts about the reliability of existing performance analysis and channel-estimation protocols for cases in which cascaded models poorly describe the physical reality. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Comments: 30 pages, 5 figures, submitted to an IEEE Journal

Counteracting Eavesdropper Attacks Through Reconfigurable Intelligent Surfaces: A New Threat Model and Secrecy Rate Optimization

Authors: George C. Alexandropoulos, Konstantinos D. Katsanos, Miaowen Wen, Daniel B. da Costa

Abstract: The potential of Reconfigurable Intelligent Surfaces (RISs) for energy-efficient and performance-boosted wireless communications is recently gaining remarkable research attention, motivating their consideration for various $5$-th Generation (5G) Advanced and beyond applications. In this paper, we consider a Multiple-Input Multiple-Output (MIMO) Physical Layer Security (PLS) system with multiple da… ▽ More The potential of Reconfigurable Intelligent Surfaces (RISs) for energy-efficient and performance-boosted wireless communications is recently gaining remarkable research attention, motivating their consideration for various $5$-th Generation (5G) Advanced and beyond applications. In this paper, we consider a Multiple-Input Multiple-Output (MIMO) Physical Layer Security (PLS) system with multiple data streams including one legitimate passive RIS and one malicious passive RIS, with the former being transparent to the multi-antenna eavesdropper and the latter's presence being unknown at the legitimate multi-antenna transceivers. We first present a novel threat model for the RIS-boosted eavesdrop** system and design a joint optimization framework for the eavesdropper's receive combining matrix and the reflection coefficients of the malicious RIS. Focusing next on the secrecy rate maximization problem, we present an RIS-empowered PLS scheme that jointly designs the legitimate precoding matrix and number of data streams, the Artificial Noise (AN) covariance matrix, the receive combining matrix, and the reflection coefficients of the legitimate RIS. The proposed optimization algorithms, whose convergence to at least local optimum points is proved, are based on alternating maximization, minorization-maximization, and manifold optimization, including semi-closed form expressions for the optimization variables. Our extensive simulation results for two representative system setups reveal that, in the absence of a legitimate RIS, transceiver spatial filtering and AN are incapable of offering non-zero secrecy rates, even for malicious RISs with small numbers of elements. However, when an $L$-element legitimate RIS is deployed, confidential communication can be safeguarded against eavesdrop** systems possessing even more than a $5L$-element malicious RIS. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Comments: 33 pages, 8 figures, submitted to an IEEE Journal

Holographic MIMO Communications: Theoretical Foundations, Enabling Technologies, and Future Directions

Authors: Tierui Gong, Panagiotis Gavriilidis, Ran Ji, Chongwen Huang, George C. Alexandropoulos, Li Wei, Zhaoyang Zhang, Mérouane Debbah, H. Vincent Poor, Chau Yuen

Abstract: Future wireless systems are envisioned to create an endogenously holography-capable, intelligent, and programmable radio propagation environment, that will offer unprecedented capabilities for high spectral and energy efficiency, low latency, and massive connectivity. A potential and promising technology for supporting the expected extreme requirements of the sixth-generation (6G) communication sy… ▽ More Future wireless systems are envisioned to create an endogenously holography-capable, intelligent, and programmable radio propagation environment, that will offer unprecedented capabilities for high spectral and energy efficiency, low latency, and massive connectivity. A potential and promising technology for supporting the expected extreme requirements of the sixth-generation (6G) communication systems is the concept of the holographic multiple-input multiple-output (HMIMO), which will actualize holographic radios with reasonable power consumption and fabrication cost. The HMIMO is facilitated by ultra-thin, extremely large, and nearly continuous surfaces that incorporate reconfigurable and sub-wavelength-spaced antennas and/or metamaterials. Such surfaces comprising dense electromagnetic (EM) excited elements are capable of recording and manipulating im**ing fields with utmost flexibility and precision, as well as with reduced cost and power consumption, thereby sha** arbitrary-intended EM waves with high energy efficiency. The powerful EM processing capability of HMIMO opens up the possibility of wireless communications of holographic imaging level, paving the way for signal processing techniques realized in the EM-domain, possibly in conjunction with their digital-domain counterparts. However, in spite of the significant potential, the studies on HMIMO communications are still at an initial stage, its fundamental limits remain to be unveiled, and a certain number of critical technical challenges need to be addressed. In this survey, we present a comprehensive overview of the latest advances in the HMIMO communications paradigm, with a special focus on their physical aspects, their theoretical foundations, as well as the enabling technologies for HMIMO systems. We also compare the HMIMO with existing multi-antenna technologies, especially the massive MIMO, present various... △ Less

Submitted 28 August, 2023; v1 submitted 2 December, 2022; originally announced December 2022.

Comments: double column, 60 pages, 26 figures, 11 tables, accepted by IEEE Communications Surveys and Tutorials

Tri-Polarized Holographic MIMO Surface in Near-Field: Channel Modeling and Precoding Design

Authors: Li Wei, Chongwen Huang, George C. Alexandropoulos, Zhaohui Yang, Jun Yang, Wei E. I. Sha, Zhaoyang Zhang, Merouane Debbah, Chau Yuen

Abstract: This paper investigates the utilization of triple polarization (TP) for multi-user (MU) holographic multiple-input multi-output surface (HMIMOS) wireless communication systems, targeting capacity boosting and diversity exploitation without enlarging the antenna array sizes. We specifically consider that both the transmitter and receiver are both equipped with an HMIMOS consisting of compact sub-wa… ▽ More This paper investigates the utilization of triple polarization (TP) for multi-user (MU) holographic multiple-input multi-output surface (HMIMOS) wireless communication systems, targeting capacity boosting and diversity exploitation without enlarging the antenna array sizes. We specifically consider that both the transmitter and receiver are both equipped with an HMIMOS consisting of compact sub-wavelength TP patch antennas within the near-field (NF) regime. To characterize TP MU-HMIMOS systems, a TP NF channel model is constructed using the dyadic Green's function, whose characteristics are leveraged to design two precoding schemes for mitigating the cross-polarization and inter-user interference contributions. Specifically, a user-cluster-based precoding scheme assigns different users to one of three polarizations at the expense of the system's diversity, and a two-layer precoding scheme removes interference using the Gaussian elimination method at a high computational cost. The theoretical correlation analysis for HMIMOS in the NF region is also investigated, revealing that both the spacing of transmit patch antennas and user distance impact transmit correlation factors. Our numerical results show that the users far from transmitting HMIMOS experience higher correlation than those closer within the NF regime, resulting in a lower channel capacity. Meanwhile, in terms of channel capacity, TP HMIMOS can almost achieve 1.25 times gain compared with dual-polarized HMIMOS, and 3 times compared with conventional HMIMOS. In addition, the proposed two-layer precoding scheme combined with two-layer power allocation realizes a higher spectral efficiency than other schemes without sacrificing diversity. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Combining Relaying and Reflective Surfaces: Power Consumption and Energy Efficiency Analysis

Authors: Zaid Abdullah, George C. Alexandropoulos, Steven Kisseleff, Symeon Chatzinotas, Bjorn Ottersten

Abstract: Hybrid relaying networks (HRNs) combining both a relay and an intelligent reflective surface (IRS) can lead to enhanced rate performance compared to non-hybrid relaying schemes, where only either an IRS or a relay is utilized. However, utilizing both the relay and the IRS simultaneously results in higher power consumption for the HRNs compared to their counterpart. In this work, we study the requi… ▽ More Hybrid relaying networks (HRNs) combining both a relay and an intelligent reflective surface (IRS) can lead to enhanced rate performance compared to non-hybrid relaying schemes, where only either an IRS or a relay is utilized. However, utilizing both the relay and the IRS simultaneously results in higher power consumption for the HRNs compared to their counterpart. In this work, we study the required transmit power levels and the energy efficiency (EE) of HRNs utilizing both a half-duplex decode-and-forward (HD-DF) relay and an IRS, and compare their performance with non-hybrid relaying schemes. The impact of the required channel estimation overheads is considered when the reflective beamforming design (RBD) at the IRS is carried out under both instantaneous and statistical channel state information models. Also, the investigation is performed for both slow- and fast-changing environments. In terms of the transmit power requirements, our results show that HRNs can lead to higher power savings if the number of reflective elements at the IRS is not very large. However, non-hybrid relaying schemes are shown to be more energy-efficient, unless the targeted rate is high and the IRS is distant from both transmitter and receiver but within a close proximity to the relay. △ Less

Submitted 11 October, 2022; originally announced October 2022.

Reconfiguring Wireless Environment via Intelligent Surfaces for 6G: Reflection, Modulation, and Security

Authors: **dan Xu, Chau Yuen, Chongwen Huang, Naveed Ul Hassan, George C. Alexandropoulos, Marco Di Renzo, Merouane Debbah

Abstract: Reconfigurable intelligent surface (RIS) has been recognized as an essential enabling technique for the sixth-generation (6G) mobile communication network. Specifically, an RIS is comprised of a large number of small and low-cost reflecting elements whose parameters are dynamically adjustable with a programmable controller. Each of these elements can effectively reflect a phase-shifted version of… ▽ More Reconfigurable intelligent surface (RIS) has been recognized as an essential enabling technique for the sixth-generation (6G) mobile communication network. Specifically, an RIS is comprised of a large number of small and low-cost reflecting elements whose parameters are dynamically adjustable with a programmable controller. Each of these elements can effectively reflect a phase-shifted version of the incident electromagnetic wave. By adjusting the wave phases in real time, the propagation environment of the reflected signals can be dynamically reconfigured to enhance communication reliability, boost transmission rate, expand cellular coverage, and strengthen communication security. In this paper, we provide an overview on RIS-assisted wireless communications. Specifically, we elaborate on the state-of-the-art enabling techniques of RISs as well as their corresponding substantial benefits from the perspectives of RIS reflection and RIS modulation. With these benefits, we envision the integration of RIS into emerging applications for 6G. In addition, communication security is of unprecedented importance in the 6G network with ubiquitous wireless services in multifarious verticals and areas. We highlight potential contributions of RIS to physical-layer security in terms of secrecy rate and secrecy outage probability, exemplified by a typical case study from both theoretical and numerical aspects. Finally, we discuss challenges and opportunities on the deployment of RISs in practice to motivate future research. △ Less

Submitted 23 August, 2022; originally announced August 2022.

Comments: Submitted to Science China Information Sciences

Reconfigurable Intelligent Surfaces and Capacity Optimization: A Large System Analysis

Authors: Aris L. Moustakas, George C. Alexandropoulos, Mérouane Debbah

Abstract: Reconfigurable Intelligent Surfaces (RISs), comprising large numbers of low-cost and almost passive metamaterials with tunable reflection properties, have been recently proposed as an enabling technology for programmable wireless propagation environments. In this paper, we present asymptotic closed-form expressions for the mean and variance of the mutual information metric for a multi-antenna tran… ▽ More Reconfigurable Intelligent Surfaces (RISs), comprising large numbers of low-cost and almost passive metamaterials with tunable reflection properties, have been recently proposed as an enabling technology for programmable wireless propagation environments. In this paper, we present asymptotic closed-form expressions for the mean and variance of the mutual information metric for a multi-antenna transmitter-receiver pair in the presence of multiple RISs, using methods from statistical physics. While nominally valid in the large system limit, we show that the derived Gaussian approximation for the mutual information can be quite accurate, even for modest-sized antenna arrays and metasurfaces. The above results are particularly useful when fast-fading conditions are present, which renders instantaneous channel estimation extremely challenging. We find that, when the channel close to an RIS is correlated, for instance due to small angle spread, which is reasonable for wireless systems with increasing carrier frequencies, the communication link benefits significantly from statistical RIS phase optimization, resulting in gains that are surprisingly higher than the nearly uncorrelated case. Using our novel asymptotic properties of the correlation matrices of the im**ing and outgoing signals at the RISs, we can optimize the metasurfaces without brute-force numerical optimization. Furthermore, when the desired reflection from any of the RISs departs significantly from geometrical optics, the metasurfaces can be optimized to provide robust communication links, without significant need for their optimal placement. △ Less

Submitted 20 August, 2022; originally announced August 2022.

Comments: 14 pages, 7 figures, submitted to an IEEE Transactions journal. arXiv admin note: text overlap with arXiv:2109.07754

Reconfigurable Intelligent Computational Surfaces: When Wave Propagation Control Meets Computing

Authors: Bo Yang, Xuelin Cao, **dan Xu, Chongwen Huang, George C. Alexandropoulos, Linglong Dai, M'erouane Debbah, H. Vincent Poor, Chau Yuen

Abstract: The envisioned sixth-generation (6G) of wireless networks will involve an intelligent integration of communications and computing, thereby meeting the urgent demands of diverse applications. To realize the concept of the smart radio environment, reconfigurable intelligent surfaces (RISs) are a promising technology for offering programmable propagation of im**ing electromagnetic signals via exter… ▽ More The envisioned sixth-generation (6G) of wireless networks will involve an intelligent integration of communications and computing, thereby meeting the urgent demands of diverse applications. To realize the concept of the smart radio environment, reconfigurable intelligent surfaces (RISs) are a promising technology for offering programmable propagation of im**ing electromagnetic signals via external control. However, the purely reflective nature of conventional RISs induces significant challenges in supporting computation-based applications, e.g., wave-based calculation and signal processing. To fulfil future communication and computing requirements, new materials are needed to complement the existing technologies of metasurfaces, enabling further diversification of electronics and their applications. In this event, we introduce the concept of reconfigurable intelligent computational surface (RICS), which is composed of two reconfigurable multifunctional layers: the `reconfigurable beamforming layer' which is responsible for tunable signal reflection, absorption, and refraction, and the `intelligence computation layer' that concentrates on metamaterials-based computing. By exploring the recent trends on computational metamaterials, RICSs have the potential to make joint communication and computation a reality. We further demonstrate two typical applications of RICSs for performing wireless spectrum sensing and secrecy signal processing. Future research challenges arising from the design and operation of RICSs are finally highlighted. △ Less

Submitted 3 October, 2022; v1 submitted 8 August, 2022; originally announced August 2022.