Showing 1–45 of 45 results for author: Ajoudani, A

SRL-VIC: A Variable Stiffness-Based Safe Reinforcement Learning for Contact-Rich Robotic Tasks

Authors: Heng Zhang, Gokhan Solak, Gustavo J. G. Lahr, Arash Ajoudani

Abstract: Reinforcement learning (RL) has emerged as a promising paradigm in complex and continuous robotic tasks, however, safe exploration has been one of the main challenges, especially in contact-rich manipulation tasks in unstructured environments. Focusing on this issue, we propose SRL-VIC: a model-free safe RL framework combined with a variable impedance controller (VIC). Specifically, safety critic… ▽ More Reinforcement learning (RL) has emerged as a promising paradigm in complex and continuous robotic tasks, however, safe exploration has been one of the main challenges, especially in contact-rich manipulation tasks in unstructured environments. Focusing on this issue, we propose SRL-VIC: a model-free safe RL framework combined with a variable impedance controller (VIC). Specifically, safety critic and recovery policy networks are pre-trained where safety critic evaluates the safety of the next action using a risk value before it is executed and the recovery policy suggests a corrective action if the risk value is high. Furthermore, the policies are updated online where the task policy not only achieves the task but also modulates the stiffness parameters to keep a safe and compliant profile. A set of experiments in contact-rich maze tasks demonstrate that our framework outperforms the baselines (without the recovery mechanism and without the VIC), yielding a good trade-off between efficient task accomplishment and safety guarantee. We show our policy trained on simulation can be deployed on a physical robot without fine-tuning, achieving successful task completion with robustness and generalization. The video is available at https://youtu.be/ksWXR3vByoQ. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: Accepted by IEEE RA-L,video is available at https://youtu.be/ksWXR3vByoQ

Journal ref: IEEE Robotics and Automation Letters, vol. 9, no. 6, pp. 5631-5638, June 2024

A Multipurpose Interface for Close- and Far-Proximity Control of Mobile Collaborative Robots

Authors: Hamidreza Raei, Juan M. Gandarias, Elena De Momi, Pietro Balatti, Arash Ajoudani

Abstract: This letter introduces an innovative visuo-haptic interface to control Mobile Collaborative Robots (MCR). Thanks to a passive detachable mechanism, the interface can be attached/detached from a robot, offering two control modes: local control (attached) and teleoperation (detached). These modes are integrated with a robot whole-body controller and presented in a unified close- and far-proximity co… ▽ More This letter introduces an innovative visuo-haptic interface to control Mobile Collaborative Robots (MCR). Thanks to a passive detachable mechanism, the interface can be attached/detached from a robot, offering two control modes: local control (attached) and teleoperation (detached). These modes are integrated with a robot whole-body controller and presented in a unified close- and far-proximity control framework for MCR. The earlier introduction of the haptic component in this interface enabled users to execute intricate loco-manipulation tasks via admittance-type control, effectively decoupling task dynamics and enhancing human capabilities. In contrast, this ongoing work proposes a novel design that integrates a visual component. This design utilizes Visual-Inertial Odometry (VIO) for teleoperation, estimating the interface's pose through stereo cameras and an Inertial Measurement Unit (IMU). The estimated pose serves as the reference for the robot's end-effector in teleoperation mode. Hence, the interface offers complete flexibility and adaptability, enabling any user to operate an MCR seamlessly without needing expert knowledge. In this letter, we primarily focus on the new visual feature, and first present a performance evaluation of different VIO-based methods for teleoperation. Next, the interface's usability is analyzed in a home-care application and compared to an alternative designed by a commercial MoCap system. Results show comparable performance in terms of accuracy, completion time, and usability. Nevertheless, the proposed interface is low-cost, poses minimal wearability constraints, and can be used anywhere and anytime without needing external devices or additional equipment, offering a versatile and accessible solution for teleoperation. △ Less

Submitted 4 June, 2024; originally announced June 2024.

A Personalizable Controller for the Walking Assistive omNi-Directional Exo-Robot (WANDER)

Authors: A. Fortuna, M. Lorenzini, M. Leonori, JM. Gandarias, P. Balatti, Y. Cho, E. De Momi, A. Ajoudani

Abstract: Preserving and encouraging mobility in the elderly and adults with chronic conditions is of paramount importance. However, existing walking aids are either inadequate to provide sufficient support to users' stability or too bulky and poorly maneuverable to be used outside hospital environments. In addition, they all lack adaptability to individual requirements. To address these challenges, this pa… ▽ More Preserving and encouraging mobility in the elderly and adults with chronic conditions is of paramount importance. However, existing walking aids are either inadequate to provide sufficient support to users' stability or too bulky and poorly maneuverable to be used outside hospital environments. In addition, they all lack adaptability to individual requirements. To address these challenges, this paper introduces WANDER, a novel Walking Assistive omNi-Directional Exo-Robot. It consists of an omnidirectional platform and a robust aluminum structure mounted on top of it, which provides partial body weight support. A comfortable and minimally restrictive coupling interface embedded with a force/torque sensor allows to detect users' intentions, which are translated into command velocities by means of a variable admittance controller. An optimization technique based on users' preferences, i.e., Preference-Based Optimization (PBO) guides the choice of the admittance parameters (i.e., virtual mass and dam**) to better fit subject-specific needs and characteristics. Experiments with twelve healthy subjects exhibited a significant decrease in energy consumption and jerk when using WANDER with PBO parameters as well as improved user performance and comfort. The great interpersonal variability in the optimized parameters highlights the importance of personalized control settings when walking with an assistive device, aiming to enhance users' comfort and mobility while ensuring reliable physical support. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comments: 6 pages, 4 figures, IEEE International Conference on Robotics and Automation (2024)

Pushing in the Dark: A Reactive Pushing Strategy for Mobile Robots Using Tactile Feedback

Authors: Idil Ozdamar, Doganay Sirintuna, Robin Arbaud, Arash Ajoudani

Abstract: For mobile robots, navigating cluttered or dynamic environments often necessitates non-prehensile manipulation, particularly when faced with objects that are too large, irregular, or fragile to grasp. The unpredictable behavior and varying physical properties of these objects significantly complicate manipulation tasks. To address this challenge, this manuscript proposes a novel Reactive Pushing S… ▽ More For mobile robots, navigating cluttered or dynamic environments often necessitates non-prehensile manipulation, particularly when faced with objects that are too large, irregular, or fragile to grasp. The unpredictable behavior and varying physical properties of these objects significantly complicate manipulation tasks. To address this challenge, this manuscript proposes a novel Reactive Pushing Strategy. This strategy allows a mobile robot to dynamically adjust its base movements in real-time to achieve successful pushing maneuvers towards a target location. Notably, our strategy adapts the robot motion based on changes in contact location obtained through the tactile sensor covering the base, avoiding dependence on object-related assumptions and its modeled behavior. The effectiveness of the Reactive Pushing Strategy was initially evaluated in the simulation environment, where it significantly outperformed the compared baseline approaches. Following this, we validated the proposed strategy through real-world experiments, demonstrating the robot capability to push objects to the target points located in the entire vicinity of the robot. In both simulation and real-world experiments, the object-specific properties (shape, mass, friction, inertia) were altered along with the changes in target locations to assess the robustness of the proposed method comprehensively. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Comments: 8 pages, 7 figures, submitted to IEEE Robotics and Automation Letters, for associated video, see https://youtu.be/IuGxlNe246M

A Combined Learning and Optimization Framework to Transfer Human Whole-body Loco-manipulation Skills to Mobile Manipulators

Authors: Jianzhuang Zhao, Francesco Tassi, Yanlong Huang, Elena De Momi, Arash Ajoudani

Abstract: Humans' ability to smoothly switch between locomotion and manipulation is a remarkable feature of sensorimotor coordination. Leaning and replication of such human-like strategies can lead to the development of more sophisticated robots capable of performing complex whole-body tasks in real-world environments. To this end, this paper proposes a combined learning and optimization framework for trans… ▽ More Humans' ability to smoothly switch between locomotion and manipulation is a remarkable feature of sensorimotor coordination. Leaning and replication of such human-like strategies can lead to the development of more sophisticated robots capable of performing complex whole-body tasks in real-world environments. To this end, this paper proposes a combined learning and optimization framework for transferring human's loco-manipulation soft-switching skills to mobile manipulators. The methodology departs from data collection of human demonstrations for a locomotion-integrated manipulation task through a vision system. Next, the wrist and pelvis motions are mapped to mobile manipulators' End-Effector (EE) and mobile base. A kernelized movement primitive algorithm learns the wrist and pelvis trajectories and generalizes to new desired points according to task requirements. Next, the reference trajectories are sent to a hierarchical quadratic programming controller, where the EE and the mobile base reference trajectories are provided as the first and second priority tasks, generating the feasible and optimal joint level commands. A locomotion-integrated pick-and-place task is executed to validate the proposed approach. After a human demonstrates the task, a mobile manipulator executes the task with the same and new settings, gras** a bottle at non-zero velocity. The results showed that the proposed approach successfully transfers the human loco-manipulation skills to mobile manipulators, even with different geometry. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Comments: 8 pages, 6 figures

Semantic-based Loco-Manipulation for Human-Robot Collaboration in Industrial Environments

Authors: Federico Rollo, Gennaro Raiola, Nikolaos Tsagarakis, Marco Roveri, Enrico Mingo Hoffman, Arash Ajoudani

Abstract: Robots with a high level of autonomy are increasingly requested by smart industries. A way to reduce the workers' stress and effort is to optimize the working environment by taking advantage of autonomous collaborative robots. A typical task for Human-Robot Collaboration (HRC) which improves the working setup in an industrial environment is the \textit{"bring me an object please"} where the user a… ▽ More Robots with a high level of autonomy are increasingly requested by smart industries. A way to reduce the workers' stress and effort is to optimize the working environment by taking advantage of autonomous collaborative robots. A typical task for Human-Robot Collaboration (HRC) which improves the working setup in an industrial environment is the \textit{"bring me an object please"} where the user asks the collaborator to search for an object while he/she is focused on something else. As often happens, science fiction is ahead of the times, indeed, in the \textit{Iron Man} movie, the robot \textit{Dum-E} helps its creator, \textit{Tony Stark}, to create its famous armours. The ability of the robot to comprehend the semantics of the environment and engage with it is valuable for the human execution of more intricate tasks. In this work, we reproduce this operation to enable a mobile robot with manipulation and gras** capabilities to leverage its geometric and semantic understanding of the environment for the execution of the \textit{Bring Me} action, thereby assisting a worker autonomously. Results are provided to validate the proposed workflow in a simulated environment populated with objects and people. This framework aims to take a step forward in assistive robotics autonomy for industries and domestic environments. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Comments: Accepted to the European Robotic Forum (ERF) 2024

FollowMe: a Robust Person Following Framework Based on Re-Identification and Gestures

Authors: Federico Rollo, Andrea Zunino, Gennaro Raiola, Fabio Amadio, Arash Ajoudani, Nikolaos Tsagarakis

Abstract: Human-robot interaction (HRI) has become a crucial enabler in houses and industries for facilitating operational flexibility. When it comes to mobile collaborative robots, this flexibility can be further increased due to the autonomous mobility and navigation capacity of the robotic agents, expanding their workspace and consequently, the personalizable assistance they can provide to the human oper… ▽ More Human-robot interaction (HRI) has become a crucial enabler in houses and industries for facilitating operational flexibility. When it comes to mobile collaborative robots, this flexibility can be further increased due to the autonomous mobility and navigation capacity of the robotic agents, expanding their workspace and consequently, the personalizable assistance they can provide to the human operators. This however requires that the robot is capable of detecting and identifying the human counterpart in all stages of the collaborative task, and in particular while following a human in crowded workplaces. To respond to this need, we developed a unified perception and navigation framework, which enables the robot to identify and follow a target person using a combination of visual Re-Identification (Re-ID), hand gestures detection, and collision-free navigation. The Re-ID module can autonomously learn the features of a target person and use the acquired knowledge to visually re-identify the target. The navigation stack is used to follow the target avoiding obstacles and other individuals in the environment. Experiments are conducted with few subjects in a laboratory setting where some unknown dynamic obstacles are introduced. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Comments: published in "2023 IEEE International Conference on Advanced Robotics and Its Social Impacts (ARSO)"

CARPE-ID: Continuously Adaptable Re-identification for Personalized Robot Assistance

Authors: Federico Rollo, Andrea Zunino, Nikolaos Tsagarakis, Enrico Mingo Hoffman, Arash Ajoudani

Abstract: In today's Human-Robot Interaction (HRI) scenarios, a prevailing tendency exists to assume that the robot shall cooperate with the closest individual or that the scene involves merely a singular human actor. However, in realistic scenarios, such as shop floor operations, such an assumption may not hold and personalized target recognition by the robot in crowded environments is required. To fulfil… ▽ More In today's Human-Robot Interaction (HRI) scenarios, a prevailing tendency exists to assume that the robot shall cooperate with the closest individual or that the scene involves merely a singular human actor. However, in realistic scenarios, such as shop floor operations, such an assumption may not hold and personalized target recognition by the robot in crowded environments is required. To fulfil this requirement, in this work, we propose a person re-identification module based on continual visual adaptation techniques that ensure the robot's seamless cooperation with the appropriate individual even subject to varying visual appearances or partial or complete occlusions. We test the framework singularly using recorded videos in a laboratory environment and an HRI scenario, i.e., a person-following task by a mobile robot. The targets are asked to change their appearance during tracking and to disappear from the camera field of view to test the challenging cases of occlusion and outfit variations. We compare our framework with one of the state-of-the-art Multi-Object Tracking (MOT) methods and the results show that the CARPE-ID can accurately track each selected target throughout the experiments in all the cases (except two limit cases). At the same time, the s-o-t-a MOT has a mean of 4 tracking errors for each video. △ Less

Submitted 31 January, 2024; v1 submitted 30 October, 2023; originally announced October 2023.

Comments: Accepted to the International Conference on Robotics and Automation (ICRA) 2024

Robot-Assisted Navigation for Visually Impaired through Adaptive Impedance and Path Planning

Authors: Pietro Balatti, Idil Ozdamar, Doganay Sirintuna, Luca Fortini, Mattia Leonori, Juan M. Gandarias, Arash Ajoudani

Abstract: This paper presents a framework to navigate visually impaired people through unfamiliar environments by means of a mobile manipulator. The Human-Robot system consists of three key components: a mobile base, a robotic arm, and the human subject who gets guided by the robotic arm via physically coupling their hand with the cobot's end-effector. These components, receiving a goal from the user, trave… ▽ More This paper presents a framework to navigate visually impaired people through unfamiliar environments by means of a mobile manipulator. The Human-Robot system consists of three key components: a mobile base, a robotic arm, and the human subject who gets guided by the robotic arm via physically coupling their hand with the cobot's end-effector. These components, receiving a goal from the user, traverse a collision-free set of waypoints in a coordinated manner, while avoiding static and dynamic obstacles through an obstacle avoidance unit and a novel human guidance planner. With this aim, we also present a legs tracking algorithm that utilizes 2D LiDAR sensors integrated into the mobile base to monitor the human pose. Additionally, we introduce an adaptive pulling planner responsible for guiding the individual back to the intended path if they veer off course. This is achieved by establishing a target arm end-effector position and dynamically adjusting the impedance parameters in real-time through a impedance tuning unit. To validate the framework we present a set of experiments both in laboratory settings with 12 healthy blindfolded subjects and a proof-of-concept demonstration in a real-world scenario. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 7 pages, 7 figures, submitted to IEEE International Conference on Robotics and Automation, for associated video, see https://youtu.be/B94n3QjdnJE

A Human Motion Compensation Framework for a Supernumerary Robotic Arm

Authors: Xin Zhang, Pietro Balatti, Mattia Leonori, Arash Ajoudani

Abstract: Supernumerary robotic arms (SRAs) can be used as the third arm to complement and augment the abilities of human users. The user carrying a SRA forms a connected kinodynamic chain, which can be viewed as a special class of floating-base robot systems. However, unlike general floating-base robot systems, human users are the bases of SRAs and they have their subjective behaviors/motions. This implies… ▽ More Supernumerary robotic arms (SRAs) can be used as the third arm to complement and augment the abilities of human users. The user carrying a SRA forms a connected kinodynamic chain, which can be viewed as a special class of floating-base robot systems. However, unlike general floating-base robot systems, human users are the bases of SRAs and they have their subjective behaviors/motions. This implies that human body motions can unintentionally affect the SRA's end-effector movements. To address this challenge, we propose a framework to compensate for the human whole-body motions that interfere with the SRA's end-effector trajectories. The SRA system in this study consists of a 6-degree-of-freedom lightweight arm and a wearable interface. The wearable interface allows users to adjust the installation position of the SRA to fit different body shapes. An inertial measurement unit (IMU)-based sensory interface can provide the body skeleton motion feedback of the human user in real time. By simplifying the floating-base kinematics model, we design an effective motion planner by reconstructing the Jacobian matrix of the SRA. Under the proposed framework, the performance of the reconstructed Jacobian method is assessed by comparing the results obtained with the classical nullspace-based method through two sets of experiments. △ Less

Submitted 15 October, 2023; originally announced October 2023.

Comments: 8 pages, 10 figures, accepted by 2023 IEEE-RAS International Conference on Humanoid Robots (Humanoids)

Artifacts Map**: Multi-Modal Semantic Map** for Object Detection and 3D Localization

Authors: Federico Rollo, Gennaro Raiola, Andrea Zunino, Nikolaos Tsagarakis, Arash Ajoudani

Abstract: Geometric navigation is nowadays a well-established field of robotics and the research focus is shifting towards higher-level scene understanding, such as Semantic Map**. When a robot needs to interact with its environment, it must be able to comprehend the contextual information of its surroundings. This work focuses on classifying and localising objects within a map, which is under constructio… ▽ More Geometric navigation is nowadays a well-established field of robotics and the research focus is shifting towards higher-level scene understanding, such as Semantic Map**. When a robot needs to interact with its environment, it must be able to comprehend the contextual information of its surroundings. This work focuses on classifying and localising objects within a map, which is under construction (SLAM) or already built. To further explore this direction, we propose a framework that can autonomously detect and localize predefined objects in a known environment using a multi-modal sensor fusion approach (combining RGB and depth data from an RGB-D camera and a lidar). The framework consists of three key elements: understanding the environment through RGB data, estimating depth through multi-modal sensor fusion, and managing artifacts (i.e., filtering and stabilizing measurements). The experiments show that the proposed framework can accurately detect 98% of the objects in the real sample environment, without post-processing, while 85% and 80% of the objects were mapped using the single RGBD camera or RGB + lidar setup respectively. The comparison with single-sensor (camera or lidar) experiments is performed to show that sensor fusion allows the robot to accurately detect near and far obstacles, which would have been noisy or imprecise in a purely visual or laser-based approach. △ Less

Submitted 21 November, 2023; v1 submitted 3 July, 2023; originally announced July 2023.

Comments: Accepted to the 11th European Conference on Mobile Robots (ECMR) 2023

The Bridge between Xsens Motion-Capture and Robot Operating System (ROS): Enabling Robots with Online 3D Human Motion Tracking

Authors: Mattia Leonori, Marta Lorenzini, Luca Fortini, Juan M. Gandarias, Arash Ajoudani

Abstract: This document introduces the bridge between the leading inertial motion-capture systems for 3D human tracking and the most used robotics software framework. 3D kinematic data provided by Xsens are translated into ROS messages to make them usable by robots and a Unified Robotics Description Format (URDF) model of the human kinematics is generated, which can be run and displayed in ROS 3D visualizer… ▽ More This document introduces the bridge between the leading inertial motion-capture systems for 3D human tracking and the most used robotics software framework. 3D kinematic data provided by Xsens are translated into ROS messages to make them usable by robots and a Unified Robotics Description Format (URDF) model of the human kinematics is generated, which can be run and displayed in ROS 3D visualizer, RViz. The code to implement the to-ROS-bridge is a ROS package called xsens_mvn_ros and is available on GitHub at https://github.com/hrii-iit/xsens_mvn_ros The main documentation can be found at https://hrii-iit.github.io/xsens_mvn_ros/index.html △ Less

Submitted 30 June, 2023; originally announced June 2023.

Comments: 8 pages, 3 figures

Maximising Coefficiency of Human-Robot Handovers through Reinforcement Learning

Authors: Marta Lagomarsino, Marta Lorenzini, Merryn Dale Constable, Elena De Momi, Cristina Becchio, Arash Ajoudani

Abstract: Handing objects to humans is an essential capability for collaborative robots. Previous research works on human-robot handovers focus on facilitating the performance of the human partner and possibly minimising the physical effort needed to grasp the object. However, altruistic robot behaviours may result in protracted and awkward robot motions, contributing to unpleasant sensations by the human p… ▽ More Handing objects to humans is an essential capability for collaborative robots. Previous research works on human-robot handovers focus on facilitating the performance of the human partner and possibly minimising the physical effort needed to grasp the object. However, altruistic robot behaviours may result in protracted and awkward robot motions, contributing to unpleasant sensations by the human partner and affecting perceived safety and social acceptance. This paper investigates whether transferring the cognitive science principle that "humans act coefficiently as a group" (i.e. simultaneously maximising the benefits of all agents involved) to human-robot cooperative tasks promotes a more seamless and natural interaction. Human-robot coefficiency is first modelled by identifying implicit indicators of human comfort and discomfort as well as calculating the robot energy consumption in performing the desired trajectory. We then present a reinforcement learning approach that uses the human-robot coefficiency score as reward to adapt and learn online the combination of robot interaction parameters that maximises such coefficiency. Results proved that by acting coefficiently the robot could meet the individual preferences of most subjects involved in the experiments, improve the human perceived comfort, and foster trust in the robotic partner. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Comments: 8 pages, 6 figures, IEEE Robotics and Automation Letters

Automatic Interaction and Activity Recognition from Videos of Human Manual Demonstrations with Application to Anomaly Detection

Authors: Elena Merlo, Marta Lagomarsino, Edoardo Lamon, Arash Ajoudani

Abstract: This paper presents a new method to describe spatio-temporal relations between objects and hands, to recognize both interactions and activities within video demonstrations of manual tasks. The approach exploits Scene Graphs to extract key interaction features from image sequences while simultaneously encoding motion patterns and context. Additionally, the method introduces event-based automatic vi… ▽ More This paper presents a new method to describe spatio-temporal relations between objects and hands, to recognize both interactions and activities within video demonstrations of manual tasks. The approach exploits Scene Graphs to extract key interaction features from image sequences while simultaneously encoding motion patterns and context. Additionally, the method introduces event-based automatic video segmentation and clustering, which allow for the grou** of similar events and detect if a monitored activity is executed correctly. The effectiveness of the approach was demonstrated in two multi-subject experiments, showing the ability to recognize and cluster hand-object and object-object interactions without prior knowledge of the activity, as well as matching the same activity performed by different subjects. △ Less

Submitted 7 July, 2023; v1 submitted 19 April, 2023; originally announced April 2023.

Comments: 8 pages, 8 figures, IEEE RAS International Symposium on Robot and Human Interactive Communication (RO-MAN), for associated video see https://youtu.be/Ftu_EHAtH4k

Markerless 3D human pose tracking through multiple cameras and AI: Enabling high accuracy, robustness, and real-time performance

Authors: Luca Fortini, Mattia Leonori, Juan M. Gandarias, Elena de Momi, Arash Ajoudani

Abstract: Tracking 3D human motion in real-time is crucial for numerous applications across many fields. Traditional approaches involve attaching artificial fiducial objects or sensors to the body, limiting their usability and comfort-of-use and consequently narrowing their application fields. Recent advances in Artificial Intelligence (AI) have allowed for markerless solutions. However, most of these metho… ▽ More Tracking 3D human motion in real-time is crucial for numerous applications across many fields. Traditional approaches involve attaching artificial fiducial objects or sensors to the body, limiting their usability and comfort-of-use and consequently narrowing their application fields. Recent advances in Artificial Intelligence (AI) have allowed for markerless solutions. However, most of these methods operate in 2D, while those providing 3D solutions compromise accuracy and real-time performance. To address this challenge and unlock the potential of visual pose estimation methods in real-world scenarios, we propose a markerless framework that combines multi-camera views and 2D AI-based pose estimation methods to track 3D human motion. Our approach integrates a Weighted Least Square (WLS) algorithm that computes 3D human motion from multiple 2D pose estimations provided by an AI-driven method. The method is integrated within the Open-VICO framework allowing simulation and real-world execution. Several experiments have been conducted, which have shown high accuracy and real-time performance, demonstrating the high level of readiness for real-world applications and the potential to revolutionize human motion capture. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Comments: 19 pages, 7 figures

Design of an Energy-Aware Cartesian Impedance Controller for Collaborative Disassembly

Authors: Sebastian Hjorth, Edoardo Lamon, Dimitrios Chrysostomou, Arash Ajoudani

Abstract: Human-robot collaborative disassembly is an emerging trend in the sustainable recycling process of electronic and mechanical products. It requires the use of advanced technologies to assist workers in repetitive physical tasks and deal with creaky and potentially damaged components. Nevertheless, when disassembling worn-out or damaged components, unexpected robot behaviors may emerge, so harmless… ▽ More Human-robot collaborative disassembly is an emerging trend in the sustainable recycling process of electronic and mechanical products. It requires the use of advanced technologies to assist workers in repetitive physical tasks and deal with creaky and potentially damaged components. Nevertheless, when disassembling worn-out or damaged components, unexpected robot behaviors may emerge, so harmless and symbiotic physical interaction with humans and the environment becomes paramount. This work addresses this challenge at the control level by ensuring safe and passive behaviors in unplanned interactions and contact losses. The proposed algorithm capitalizes on an energy-aware Cartesian impedance controller, which features energy scaling and dam** injection, and an augmented energy tank, which limits the power flow from the controller to the robot. The controller is evaluated in a real-world flawed unscrewing task with a Franka Emika Panda and is compared to a standard impedance controller and a hybrid force-impedance controller. The results demonstrate the high potential of the algorithm in human-robot collaborative disassembly tasks. △ Less

Submitted 28 September, 2023; v1 submitted 7 February, 2023; originally announced February 2023.

Comments: 7 pages, 6 figures, presented at the 2023 IEEE International Conference on Robotics and Automation (ICRA). Video available at https://www.youtube-nocookie.com/embed/SgYFHMlEl0k

Enhancing Human-Robot Collaboration Transportation through Obstacle-Aware Vibrotactile Feedback

Authors: Doganay Sirintuna, Idil Ozdamar, Juan M. Gandarias, Arash Ajoudani

Abstract: Transporting large and heavy objects can benefit from Human-Robot Collaboration (HRC), increasing the contribution of robots to our daily tasks and reducing the risk of injuries to the human operator. This approach usually posits the human collaborator as the leader, while the robot has the follower role. Hence, it is essential for the leader to be aware of the environmental situation. However, wh… ▽ More Transporting large and heavy objects can benefit from Human-Robot Collaboration (HRC), increasing the contribution of robots to our daily tasks and reducing the risk of injuries to the human operator. This approach usually posits the human collaborator as the leader, while the robot has the follower role. Hence, it is essential for the leader to be aware of the environmental situation. However, when transporting a large object, the operator's situational awareness can be compromised as the object may occlude different parts of the environment. This paper proposes a novel haptic-based environmental awareness module for a collaborative transportation framework that informs the human operator about surrounding obstacles. The robot uses two LIDARs to detect the obstacles in the surroundings. The warning module alerts the operator through a haptic belt with four vibrotactile devices that provide feedback about the location and proximity of the obstacles. By enhancing the operator's awareness of the surroundings, the proposed module improves the safety of the human-robot team in co-carrying scenarios by preventing collisions. Experiments with two non-expert subjects in two different situations are conducted. The results show that the human partner can successfully lead the co-transportation system in an unknown environment with hidden obstacles thanks to the haptic feedback. △ Less

Submitted 24 August, 2023; v1 submitted 6 February, 2023; originally announced February 2023.

Comments: 6 pages, 5 figures, for associated video, see this https://youtu.be/UABeGPIIrHc

A Unified Architecture for Dynamic Role Allocation and Collaborative Task Planning in Mixed Human-Robot Teams

Authors: Edoardo Lamon, Fabio Fusaro, Elena De Momi, Arash Ajoudani

Abstract: The growing deployment of human-robot collaborative processes in several industrial applications, such as handling, welding, and assembly, unfolds the pursuit of systems which are able to manage large heterogeneous teams and, at the same time, monitor the execution of complex tasks. In this paper, we present a novel architecture for dynamic role allocation and collaborative task planning in a mixe… ▽ More The growing deployment of human-robot collaborative processes in several industrial applications, such as handling, welding, and assembly, unfolds the pursuit of systems which are able to manage large heterogeneous teams and, at the same time, monitor the execution of complex tasks. In this paper, we present a novel architecture for dynamic role allocation and collaborative task planning in a mixed human-robot team of arbitrary size. The architecture capitalizes on a centralized reactive and modular task-agnostic planning method based on Behavior Trees (BTs), in charge of actions scheduling, while the allocation problem is formulated through a Mixed-Integer Linear Program (MILP), that assigns dynamically individual roles or collaborations to the agents of the team. Different metrics used as MILP cost allow the architecture to favor various aspects of the collaboration (e.g. makespan, ergonomics, human preferences). Human preference are identified through a negotiation phase, in which, an human agent can accept/refuse to execute the assigned task.In addition, bilateral communication between humans and the system is achieved through an Augmented Reality (AR) custom user interface that provides intuitive functionalities to assist and coordinate workers in different action phases. The computational complexity of the proposed methodology outperforms literature approaches in industrial sized jobs and teams (problems up to 50 actions and 20 agents in the team with collaborations are solved within 1 s). The different allocated roles, as the cost functions change, highlights the flexibility of the architecture to several production requirements. Finally, the subjective evaluation demonstrating the high usability level and the suitability for the targeted scenario. △ Less

Submitted 25 September, 2023; v1 submitted 19 January, 2023; originally announced January 2023.

Comments: 18 pages, 20 figures, 2nd round review at Transaction on Robotics

An Ergonomic Role Allocation Framework for Dynamic Human-Robot Collaborative Tasks

Authors: Elena Merlo, Edoardo Lamon, Fabio Fusaro, Marta Lorenzini, Alessandro Carfì, Fulvio Mastrogiovanni, Arash Ajoudani

Abstract: By incorporating ergonomics principles into the task allocation processes, human-robot collaboration (HRC) frameworks can favour the prevention of work-related musculoskeletal disorders (WMSDs). In this context, existing offline methodologies do not account for the variability of human actions and states; therefore, planning and dynamically assigning roles in human-robot teams remains an unaddress… ▽ More By incorporating ergonomics principles into the task allocation processes, human-robot collaboration (HRC) frameworks can favour the prevention of work-related musculoskeletal disorders (WMSDs). In this context, existing offline methodologies do not account for the variability of human actions and states; therefore, planning and dynamically assigning roles in human-robot teams remains an unaddressed challenge.This study aims to create an ergonomic role allocation framework that optimises the HRC, taking into account task features and human state measurements. The presented framework consists of two main modules: the first provides the HRC task model, exploiting AND/OR Graphs (AOG)s, which we adapted to solve the allocation problem; the second module describes the ergonomic risk assessment during task execution through a risk indicator and updates the AOG-related variables to influence future task allocation. The proposed framework can be combined with any time-varying ergonomic risk indicator that evaluates human cognitive and physical burden. In this work, we tested our framework in an assembly scenario, introducing a risk index named Kinematic Wear.The overall framework has been tested with a multi-subject experiment. The task allocation results and subjective evaluations, measured with questionnaires, show that high-risk actions are correctly recognised and not assigned to humans, reducing fatigue and frustration in collaborative tasks. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: 14 pages, 22 figures, accepted to the special issue on Human-centric Smart Manufacturing: Trends, Issues and Challenges of the Journal of Manufacturing Systems

Carrying the uncarriable: a deformation-agnostic and human-cooperative framework for unwieldy objects using multiple robots

Authors: Doganay Sirintuna, Idil Ozdamar, Arash Ajoudani

Abstract: This manuscript introduces an object deformability-agnostic framework for co-carrying tasks that are shared between a person and multiple robots. Our approach allows the full control of the co-carrying trajectories by the person while sharing the load with multiple robots depending on the size and the weight of the object. This is achieved by merging the haptic information transferred through the… ▽ More This manuscript introduces an object deformability-agnostic framework for co-carrying tasks that are shared between a person and multiple robots. Our approach allows the full control of the co-carrying trajectories by the person while sharing the load with multiple robots depending on the size and the weight of the object. This is achieved by merging the haptic information transferred through the object and the human motion information obtained from a motion capture system. One important advantage of the framework is that no strict internal communication is required between the robots, regardless of the object size and deformation characteristics. We validate the framework with two challenging real-world scenarios: co-transportation of a wooden rigid closet and a bulky box on top of forklift moving straps, with the latter characterizing deformable objects. In order to evaluate the generalizability of the proposed framework, a heterogenous team of two mobile manipulators that consist of an Omni-directional mobile base and a collaborative robotic arm with different DoFs is chosen for the experiments. The qualitative comparison between our controller and the baseline controller (i.e., an admittance controller) during these experiments demonstrated the effectiveness of the proposed framework especially when co-carrying deformable objects. Furthermore, we believe that the performance of our framework during the experiment with the lifting straps offers a promising solution for the co-transportation of bulky and ungraspable objects. △ Less

Submitted 9 February, 2023; v1 submitted 28 September, 2022; originally announced September 2022.

Comments: 7 pages, 6 figures, accepted at IEEE International Conference on Robotics and Automation (ICRA 2023), for associated video, see https://youtu.be/Q3sA6YzTaaE

Impact-Friendly Object Catching at Non-Zero Velocity Based on Combined Optimization and Learning

Authors: Jianzhuang Zhao, Gustavo J. G. Lahr, Francesco Tassi, Alessandro Santopaolo, Elena De Momi, Arash Ajoudani

Abstract: This paper proposes a combined optimization and learning method for impact-friendly, non-prehensile catching of objects at non-zero velocity. Through a constrained Quadratic Programming problem, the method generates optimal trajectories up to the contact point between the robot and the object to minimize their relative velocity and reduce the impact forces. Next, the generated trajectories are upd… ▽ More This paper proposes a combined optimization and learning method for impact-friendly, non-prehensile catching of objects at non-zero velocity. Through a constrained Quadratic Programming problem, the method generates optimal trajectories up to the contact point between the robot and the object to minimize their relative velocity and reduce the impact forces. Next, the generated trajectories are updated by Kernelized Movement Primitives, which are based on human catching demonstrations to ensure a smooth transition around the catching point. In addition, the learned human variable stiffness (HVS) is sent to the robot's Cartesian impedance controller to absorb the post-impact forces and stabilize the catching position. Three experiments are conducted to compare our method with and without HVS against a fixed-position impedance controller (FP-IC). The results showed that the proposed methods outperform the FP-IC while adding HVS yields better results for absorbing the post-impact forces. △ Less

Submitted 5 September, 2023; v1 submitted 26 September, 2022; originally announced September 2022.

Comments: 8 pages, 9 figures, accepted by 2023 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2023)

An Open Tele-Impedance Framework to Generate Data for Contact-Rich Tasks in Robotic Manipulation

Authors: Alberto Giammarino, Juan M. Gandarias, Arash Ajoudani

Abstract: Using large datasets in machine learning has led to outstanding results, in some cases outperforming humans in tasks that were believed impossible for machines. However, achieving human-level performance when dealing with physically interactive tasks, e.g., in contact-rich robotic manipulation, is still a big challenge. It is well known that regulating the Cartesian impedance for such operations i… ▽ More Using large datasets in machine learning has led to outstanding results, in some cases outperforming humans in tasks that were believed impossible for machines. However, achieving human-level performance when dealing with physically interactive tasks, e.g., in contact-rich robotic manipulation, is still a big challenge. It is well known that regulating the Cartesian impedance for such operations is of utmost importance for their successful execution. Approaches like reinforcement Learning (RL) can be a promising paradigm for solving such problems. More precisely, approaches that use task-agnostic expert demonstrations to bootstrap learning when solving new tasks have a huge potential since they can exploit large datasets. However, existing data collection systems are expensive, complex, or do not allow for impedance regulation. This work represents a first step towards a data collection framework suitable for collecting large datasets of impedance-based expert demonstrations compatible with the RL problem formulation, where a novel action space is used. The framework is designed according to requirements acquired after an extensive analysis of available data collection frameworks for robotics manipulation. The result is a low-cost and open-access tele-impedance framework which makes human experts capable of demonstrating contact-rich tasks. △ Less

Submitted 6 February, 2023; v1 submitted 21 September, 2022; originally announced September 2022.

Comments: 6 pages, 4 figures, submitted to IEEE International Conference on Advanced Robotics and Its Social Impacts 2023 (ARSO)

An Object Deformation-Agnostic Framework for Human-Robot Collaborative Transportation

Authors: Doganay Sirintuna, Alberto Giammarino, Arash Ajoudani

Abstract: In this study, an adaptive object deformability-agnostic human-robot collaborative transportation framework is presented. The proposed framework enables to combine the haptic information transferred through the object with the human kinematic information obtained from a motion capture system to generate reactive whole-body motions on a mobile collaborative robot. Furthermore, it allows rotating th… ▽ More In this study, an adaptive object deformability-agnostic human-robot collaborative transportation framework is presented. The proposed framework enables to combine the haptic information transferred through the object with the human kinematic information obtained from a motion capture system to generate reactive whole-body motions on a mobile collaborative robot. Furthermore, it allows rotating the objects in an intuitive and accurate way during co-transportation based on an algorithm that detects the human rotation intention using the torso and hand movements. First, we validate the framework with the two extremities of the object deformability range (i.e, purely rigid aluminum rod and highly deformable rope) by utilizing a mobile manipulator which consists of an Omni-directional mobile base and a collaborative robotic arm. Next, its performance is compared with an admittance controller during a co-carry task of a partially deformable object in a 12-subjects user study. Quantitative and qualitative results of this experiment show that the proposed framework can effectively handle the transportation of objects regardless of their deformability and provides intuitive assistance to human partners. Finally, we have demonstrated the potential of our framework in a different scenario, where the human and the robot co-transport a manikin using a deformable sheet. △ Less

Submitted 27 July, 2022; originally announced July 2022.

Comments: 13 pages, 13 figures, submitted to IEEE Transactions on Automation Science and Engineering, for associated video, see https://youtu.be/oyfUkYj5WYw. arXiv admin note: substantial text overlap with arXiv:2201.10392

A Shared Autonomy Reconfigurable Control Framework for Telemanipulation of Multi-arm Systems

Authors: Idil Ozdamar, Marco Laghi, Giorgio Grioli, Arash Ajoudani, Manuel G. Catalano, Antonio Bicchi

Abstract: Teleoperation is a widely adopted strategy to control robotic manipulators executing complex tasks that require highly dexterous movements and critical high-level intelligence. Classical teleoperation schemes are based on either joystick control, or on more intuitive interfaces which map directly the user arm motions into one robot arm's motions. These approaches have limits when the execution of… ▽ More Teleoperation is a widely adopted strategy to control robotic manipulators executing complex tasks that require highly dexterous movements and critical high-level intelligence. Classical teleoperation schemes are based on either joystick control, or on more intuitive interfaces which map directly the user arm motions into one robot arm's motions. These approaches have limits when the execution of a given task requires reconfigurable multiple robotic arm systems. Indeed, the simultaneous teleoperation of two or more robot arms could extend the workspace of the manipulation cell, or increase its total payload, or afford other advantages. In different phases of a reconfigurable multi-arm system, each robot could act as an independent arm, or as one of a pair of cooperating arms, or as one of the fingers of a virtual, large robot hand. This manuscript proposes a novel telemanipulation framework that enables both the individual and combined control of any number of robotic arms. Thanks to the designed control architecture, the human operator can intuitively choose the proposed control modalities and the manipulators that make the task convenient to execute through the user interface. Moreover, through the tele-impedance paradigm, the system can address complex tasks that require physical interaction by letting the robot mimic the arm impedance and position references of the human operator. The proposed framework is validated with 8 subjects controlling 4 Franka Emika Panda robots with 7-DoFs to execute a telemanipulation task. Qualitative results of the experiments show us the promising applicability of our framework. △ Less

Submitted 20 July, 2022; originally announced July 2022.

Comments: 8 pages, 8 figures, accepted to IEEE Robotics and Automation Letters, for associated video, see https://youtu.be/zef-86tK8xU

ErgoTac-Belt: Anticipatory Vibrotactile Feedback to Lead Centre of Pressure during Walking

Authors: Marta Lorenzini, Juan M. Gandarias, Luca Fortini, Wansoo Kim, Arash Ajoudani

Abstract: Balance and gait disorders are the second leading cause of falls, which, along with consequent injuries, are reported as major public health problems all over the world. For patients who do not require mechanical support, vibrotactile feedback interfaces have proven to be a successful approach in restoring balance. Most of the existing strategies assess trunk or head tilt and velocity or plantar f… ▽ More Balance and gait disorders are the second leading cause of falls, which, along with consequent injuries, are reported as major public health problems all over the world. For patients who do not require mechanical support, vibrotactile feedback interfaces have proven to be a successful approach in restoring balance. Most of the existing strategies assess trunk or head tilt and velocity or plantar forces, and are limited to the analysis of stance. On the other hand, central to balance control is the need to maintain the body's centre of pressure (CoP) within feasible limits of the support polygon (SP), as in standing, or on track to a new SP, as in walking. Hence, this paper proposes an exploratory study to investigate whether vibrotactile feedback can be employed to lead human CoP during walking. The ErgoTac-Belt vibrotactile device is introduced to instruct the users about the direction to take, both in the antero-posterior and medio-lateral axes. An anticipatory strategy is adopted here, to give the users enough time to react to the stimuli. Experiments on ten healthy subjects demonstrated the promising capability of the proposed device to guide the users' CoP along a predefined reference path, with similar performance as the one achieved with visual feedback. Future developments will investigate our strategy and device in guiding the CoP of elderly or individuals with vestibular impairments, who may not be aware of or, able to figure out, a safe and ergonomic CoP path. △ Less

Submitted 16 May, 2023; v1 submitted 8 July, 2022; originally announced July 2022.

Comments: 6 pages, 6 figures, accepted at IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob). For associated video, see https://youtu.be/Hz42KohAgso

Performance Analysis of Vibrotactile and Slide-and-Squeeze Haptic Feedback Devices for Limbs Postural Adjustment

Authors: Marta Lorenzini, Simone Ciotti, Juan M. Gandarias, Simone Fani, Matteo Bianchi, Arash Ajoudani

Abstract: Recurrent or sustained awkward body postures are among the most frequently cited risk factors to the development of work-related musculoskeletal disorders (MSDs). To prevent workers from adopting harmful configurations but also to guide them toward more ergonomic ones, wearable haptic devices may be the ideal solution. In this paper, a vibrotactile unit, called ErgoTac, and a slide-and-squeeze uni… ▽ More Recurrent or sustained awkward body postures are among the most frequently cited risk factors to the development of work-related musculoskeletal disorders (MSDs). To prevent workers from adopting harmful configurations but also to guide them toward more ergonomic ones, wearable haptic devices may be the ideal solution. In this paper, a vibrotactile unit, called ErgoTac, and a slide-and-squeeze unit, called CUFF, were evaluated in a limbs postural correction setting. Their capability of providing single-joint (shoulder or knee) and multi-joint (shoulder and knee at once) guidance was compared in twelve healthy subjects, using quantitative task-related metrics and subjective quantitative evaluation. An integrated environment was also built to ease communication and data sharing between the involved sensor and feedback systems. Results show good acceptability and intuitiveness for both devices. ErgoTac appeared as the suitable feedback device for the shoulder, while the CUFF may be the effective solution for the knee. This comparative study, although preliminary, was propaedeutic to the potential integration of the two devices for effective whole-body postural corrections, with the aim to develop a feedback and assistive apparatus to increase workers' awareness about risky working conditions and therefore to prevent MSDs. △ Less

Submitted 8 July, 2022; originally announced July 2022.

Comments: conference paper, 7 pages, 8 figures

Pick the Right Co-Worker: Online Assessment of Cognitive Ergonomics in Human-Robot Collaborative Assembly

Authors: Marta Lagomarsino, Marta Lorenzini, Pietro Balatti, Elena De Momi, Arash Ajoudani

Abstract: Human-robot collaborative assembly systems enhance the efficiency and productivity of the workplace but may increase the workers' cognitive demand. This paper proposes an online and quantitative framework to assess the cognitive workload induced by the interaction with a co-worker, either a human operator or an industrial collaborative robot with different control strategies. The approach monitors… ▽ More Human-robot collaborative assembly systems enhance the efficiency and productivity of the workplace but may increase the workers' cognitive demand. This paper proposes an online and quantitative framework to assess the cognitive workload induced by the interaction with a co-worker, either a human operator or an industrial collaborative robot with different control strategies. The approach monitors the operator's attention distribution and upper-body kinematics benefiting from the input images of a low-cost stereo camera and cutting-edge artificial intelligence algorithms (i.e. head pose estimation and skeleton tracking). Three experimental scenarios with variations in workstation features and interaction modalities were designed to test the performance of our online method against state-of-the-art offline measurements. Results proved that our vision-based cognitive load assessment has the potential to be integrated into the new generation of collaborative robotic technologies. The latter would enable human cognitive state monitoring and robot control strategy adaptation for improving human comfort, ergonomics, and trust in automation. △ Less

Submitted 8 July, 2022; originally announced July 2022.

Comments: 10 pages, 7 figures, IEEE Transactions on Cognitive and Developmental Systems

Robot Trajectory Adaptation to Optimise the Trade-off between Human Cognitive Ergonomics and Workplace Productivity in Collaborative Tasks

Authors: Marta Lagomarsino, Marta Lorenzini, Elena De Momi, Arash Ajoudani

Abstract: In hybrid industrial environments, workers' comfort and positive perception of safety are essential requirements for successful acceptance and usage of collaborative robots. This paper proposes a novel human-robot interaction framework in which the robot behaviour is adapted online according to the operator's cognitive workload and stress. The method exploits the generation of B-spline trajectorie… ▽ More In hybrid industrial environments, workers' comfort and positive perception of safety are essential requirements for successful acceptance and usage of collaborative robots. This paper proposes a novel human-robot interaction framework in which the robot behaviour is adapted online according to the operator's cognitive workload and stress. The method exploits the generation of B-spline trajectories in the joint space and formulation of a multi-objective optimisation problem to online adjust the total execution time and smoothness of the robot trajectories. The former ensures human efficiency and productivity of the workplace, while the latter contributes to safeguarding the user's comfort and cognitive ergonomics. The performance of the proposed framework was evaluated in a typical industrial task. Results demonstrated its capability to enhance the productivity of the human-robot dyad while mitigating the cognitive workload induced in the worker. △ Less

Submitted 8 July, 2022; originally announced July 2022.

Comments: 7 pages, 8 figures, 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2022)

Sociable and Ergonomic Human-Robot Collaboration through Action Recognition and Augmented Hierarchical Quadratic Programming

Authors: Francesco Tassi, Francesco Iodice, Elena De Momi, Arash Ajoudani

Abstract: The recognition of actions performed by humans and the anticipation of their intentions are important enablers to yield sociable and successful collaboration in human-robot teams. Meanwhile, robots should have the capacity to deal with multiple objectives and constraints, arising from the collaborative task or the human. In this regard, we propose vision techniques to perform human action recognit… ▽ More The recognition of actions performed by humans and the anticipation of their intentions are important enablers to yield sociable and successful collaboration in human-robot teams. Meanwhile, robots should have the capacity to deal with multiple objectives and constraints, arising from the collaborative task or the human. In this regard, we propose vision techniques to perform human action recognition and image classification, which are integrated into an Augmented Hierarchical Quadratic Programming (AHQP) scheme to hierarchically optimize the robot's reactive behavior and human ergonomics. The proposed framework allows one to intuitively command the robot in space while a task is being executed. The experiments confirm increased human ergonomics and usability, which are fundamental parameters for reducing musculoskeletal diseases and increasing trust in automation. △ Less

Submitted 7 July, 2022; originally announced July 2022.

Comments: 8 pages, 8 figures, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2022)

A Directional Vibrotactile Feedback Interface for Ergonomic Postural Adjustment

Authors: Wansoo Kim, Virginia Ruiz Garate, Juan M. Gandarias, Marta Lorenzini, Arash Ajoudani

Abstract: The objective of this paper is to develop and evaluate a directional vibrotactile feedback interface as a guidance tool for postural adjustments during work. In contrast to the existing active and wearable systems such as exoskeletons, we aim to create a lightweight and intuitive interface, capable of guiding its wearers towards more ergonomic and healthy working conditions. To achieve this, a vib… ▽ More The objective of this paper is to develop and evaluate a directional vibrotactile feedback interface as a guidance tool for postural adjustments during work. In contrast to the existing active and wearable systems such as exoskeletons, we aim to create a lightweight and intuitive interface, capable of guiding its wearers towards more ergonomic and healthy working conditions. To achieve this, a vibrotactile device called ErgoTac is employed to develop three different feedback modalities that are able to provide a directional guidance at the body segments towards a desired pose. In addition, an evaluation is made to find the most suitable, comfortable, and intuitive feedback modality for the user. Therefore, these modalities are first compared experimentally on fifteen subjects wearing eight ErgoTac devices to achieve targeted arm and torso configurations. The most effective directional feedback modality is then evaluated on five subjects in a set of experiments in which an ergonomic optimisation module provides the optimised body posture while performing heavy lifting or forceful exertion tasks. The results yield strong evidence on the usefulness and the intuitiveness of one of the developed modalities in providing guidance towards ergonomic working conditions, by minimising the effect of an external load on body joints. We believe that the integration of such low-cost devices in workplaces can help address the well-known and complex problem of work-related musculoskeletal disorders. △ Less

Submitted 4 May, 2022; v1 submitted 29 April, 2022; originally announced April 2022.

Comments: 12 pages. 13 figures. Now published in IEEE Transactions on Haptics DOI: 10.1109/TOH.2021.3112795

Journal ref: IEEE Transactions on Haptics ( Volume: 15, Issue: 1, Jan.-March 1 2022)

Learning Cooperative Dynamic Manipulation Skills from Human Demonstration Videos

Authors: Francesco Iodice, Yuqiang Wu, Wansoo Kim, Fei Zhao, Elena De Momi, Arash Ajoudani

Abstract: This article proposes a method for learning and robotic replication of dynamic collaborative tasks from offline videos. The objective is to extend the concept of learning from demonstration (LfD) to dynamic scenarios, benefiting from widely available or easily producible offline videos. To achieve this goal, we decode important dynamic information, such as the Configuration Dependent Stiffness (CD… ▽ More This article proposes a method for learning and robotic replication of dynamic collaborative tasks from offline videos. The objective is to extend the concept of learning from demonstration (LfD) to dynamic scenarios, benefiting from widely available or easily producible offline videos. To achieve this goal, we decode important dynamic information, such as the Configuration Dependent Stiffness (CDS), which reveals the contribution of arm pose to the arm endpoint stiffness, from a three-dimensional human skeleton model. Next, through encoding of the CDS via Gaussian Mixture Model (GMM) and decoding via Gaussian Mixture Regression (GMR), the robot's Cartesian impedance profile is estimated and replicated. We demonstrate the proposed method in a collaborative sawing task with leader-follower structure, considering environmental constraints and dynamic uncertainties. The experimental setup includes two Panda robots, which replicate the leader-follower roles and the impedance profiles extracted from a two-persons sawing video. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Open-VICO: An Open-Source Gazebo Toolkit for Vision-based Skeleton Tracking in Human-Robot Collaboration

Authors: Luca Fortini, Mattia Leonori, Juan M. Gandarias, Elena De Momi, Arash Ajoudani

Abstract: Simulation tools are essential for robotics research, especially for those domains in which safety is crucial, such as Human-Robot Collaboration (HRC). However, it is challenging to simulate human behaviors, and existing robotics simulators do not integrate functional human models. This work presents Open-VICO, an open-source toolkit to integrate virtual human models in Gazebo focusing on vision-b… ▽ More Simulation tools are essential for robotics research, especially for those domains in which safety is crucial, such as Human-Robot Collaboration (HRC). However, it is challenging to simulate human behaviors, and existing robotics simulators do not integrate functional human models. This work presents Open-VICO, an open-source toolkit to integrate virtual human models in Gazebo focusing on vision-based human tracking. In particular, Open-VICO allows to combine in the same simulation environment realistic human kinematic models, multi-camera vision setups, and human-tracking techniques along with numerous robot and sensor models thanks to Gazebo. The possibility to incorporate pre-recorded human skeleton motion with Motion Capture systems broadens the landscape of human performance behavioral analysis within Human-Robot Interaction (HRI) settings. To describe the functionalities and stress the potential of the toolkit four specific examples, chosen among relevant literature challenges in the field, are developed using our simulation utils: i) 3D multi-RGB-D camera calibration in simulation, ii) creation of a synthetic human skeleton tracking dataset based on OpenPose, iii) multi-camera scenario for human skeleton tracking in simulation, and iv) a human-robot interaction example. The key of this work is to create a straightforward pipeline which we hope will motivate research on new vision-based algorithms and methodologies for lightweight human-tracking and flexible human-robot applications. △ Less

Submitted 4 October, 2022; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: 7 pages, 8 figures. The final version of this preprint has been published at IEEE International Conference on Robot & Human Interactive Communication. DOI: 10.1109/RO-MAN53752.2022.9900851. Code: https://gitlab.iit.it/hrii-public/open-vico

A Hybrid Learning and Optimization Framework to Achieve Physically Interactive Tasks with Mobile Manipulators

Authors: Jianzhuang Zhao, Alberto Giammarino, Edoardo Lamon, Juan M. Gandarias, Elena De Momi, Arash Ajoudani

Abstract: This paper proposes a hybrid learning and optimization framework for mobile manipulators for complex and physically interactive tasks. The framework exploits an admittance-type physical interface to obtain intuitive and simplified human demonstrations and Gaussian Mixture Model (GMM)/Gaussian Mixture Regression (GMR) to encode and generate the learned task requirements in terms of position, veloci… ▽ More This paper proposes a hybrid learning and optimization framework for mobile manipulators for complex and physically interactive tasks. The framework exploits an admittance-type physical interface to obtain intuitive and simplified human demonstrations and Gaussian Mixture Model (GMM)/Gaussian Mixture Regression (GMR) to encode and generate the learned task requirements in terms of position, velocity, and force profiles. Next, using the desired trajectories and force profiles generated by GMM/GMR, the impedance parameters of a Cartesian impedance controller are optimized online through a Quadratic Program augmented with an energy tank to ensure the passivity of the controlled system. Two experiments are conducted to validate the framework, comparing our method with two approaches with constant stiffness (high and low). The results showed that the proposed method outperforms the other two cases in terms of trajectory tracking and generated interaction forces, even in the presence of disturbances such as unexpected end-effector collisions. △ Less

Submitted 1 August, 2022; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: 8 pages, 6 figures, accepted by IEEE Robotics and Automation Letters and IEEE International Conference on Intelligent Robots and Systems 2022

A Self-Tuning Impedance-based Interaction Planner for Robotic Haptic Exploration

Authors: Yasuhiro Kato, Pietro Balatti, Juan M. Gandarias, Mattia Leonori, Toshiaki Tsuji, Arash Ajoudani

Abstract: This paper presents a novel interaction planning method that exploits impedance tuning techniques in response to environmental uncertainties and unpredictable conditions using haptic information only. The proposed algorithm plans the robot's trajectory based on the haptic interaction with the environment and adapts planning strategies as needed. Two approaches are considered: Exploration and Bounc… ▽ More This paper presents a novel interaction planning method that exploits impedance tuning techniques in response to environmental uncertainties and unpredictable conditions using haptic information only. The proposed algorithm plans the robot's trajectory based on the haptic interaction with the environment and adapts planning strategies as needed. Two approaches are considered: Exploration and Bouncing strategies. The Exploration strategy takes the actual motion of the robot into account in planning, while the Bouncing strategy exploits the forces and the motion vector of the robot. Moreover, self-tuning impedance is performed according to the planned trajectory to ensure compliant contact and low contact forces. In order to show the performance of the proposed methodology, two experiments with a torque-controller robotic arm are carried out. The first considers a maze exploration without obstacles, whereas the second includes obstacles. The proposed method performance is analyzed and compared against previously proposed solutions in both cases. Experimental results demonstrate that: i) the robot can successfully plan its trajectory autonomously in the most feasible direction according to the interaction with the environment, and ii) a compliant interaction with an unknown environment despite the uncertainties is achieved. Finally, a scalability demonstration is carried out to show the potential of the proposed method under multiple scenarios. △ Less

Submitted 2 September, 2022; v1 submitted 10 March, 2022; originally announced March 2022.

Comments: 8 pages, 9 figures, accepted for IEEE Robotics and Automation Letters (RA-L) and IEEE/RSJ International Conference on Intelligent Robots and Systems 2022

A hybrid model-based evolutionary optimization with passive boundaries for physical human-robot interaction

Authors: Gustavo J. G. Lahr, Henrique B. Garcia, Arash Ajoudani, Thiago Boaventura, Glauco A. P. Caurin

Abstract: The field of physical human-robot interaction has dramatically evolved in the last decades. As a result, the robotic system's requirements have become more challenging, including personalized behavior for different tasks and users. Various machine learning techniques have been proposed to give the robot such adaptability features. This paper proposes a model-based evolutionary optimization algorit… ▽ More The field of physical human-robot interaction has dramatically evolved in the last decades. As a result, the robotic system's requirements have become more challenging, including personalized behavior for different tasks and users. Various machine learning techniques have been proposed to give the robot such adaptability features. This paper proposes a model-based evolutionary optimization algorithm to tune the apparent impedance of a wrist rehabilitation device. We used passivity to define boundaries for the possible controller outcomes, limiting the shared autonomy of the robot and ensuring the coupled system stability. The experiment consists of a hardware-in-the-loop optimization and a one-degree-of-freedom robot used for wrist rehabilitation. Experimental results showed that the proposed technique could generate customized passive impedance controllers for three subjects. Furthermore, when compared with a constant impedance controller, the method suggested decreased in 20\% the root mean square of interaction torques while maintaining stability during optimization. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Comments: 7 pages, 6 figures, submitted to IEEE International Conference on Robotics and Automation 2022

MOCA-S: A Sensitive Mobile Collaborative Robotic Assistant exploiting Low-Cost Capacitive Tactile Cover and Whole-Body Control

Authors: Mattia Leonori, Juan M. Gandarias, Arash Ajoudani

Abstract: Safety is one of the most fundamental aspects of robotics, especially when it comes to collaborative robots (cobots) that are expected to physically interact with humans. Although a large body of literature has focused on safety-related aspects for fixed-based cobots, a low effort has been put into develo** collaborative mobile manipulators. In response to this need, this work presents MOCA-S, i… ▽ More Safety is one of the most fundamental aspects of robotics, especially when it comes to collaborative robots (cobots) that are expected to physically interact with humans. Although a large body of literature has focused on safety-related aspects for fixed-based cobots, a low effort has been put into develo** collaborative mobile manipulators. In response to this need, this work presents MOCA-S, i.e., Sensitive Mobile Collaborative Robotic Assistant, that integrates a low-cost, capacitive tactile cover to measure interaction forces applied to the robot base. The tactile cover comprises a set of 11 capacitive large-area tactile sensors distributed as a 1-D tactile array around the base. Characterization of the tactile sensors with different materials is included. Moreover, two expanded whole-body controllers that exploit the platform's tactile cover and the loco-manipulation features are proposed. These controllers are tested in two experiments, demonstrating the potential of MOCA-S for safe physical Human-Robot Interaction (pHRI). Finally, an experiment is carried out in which an undesired collision occurs between MOCA-S and a human during a loco-manipulation task. The results demonstrate the intrinsic safety of MOCA-S and the proposed controllers, suggesting a new step towards creating safe mobile manipulators. △ Less

Submitted 27 February, 2022; originally announced February 2022.

Comments: 8 pages, 7 figures, submitted to IEEE Robotics and Automation Letters and IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2022). Video: https://youtu.be/IX6fn8ODSt8

Human-Robot Collaborative Carrying of Objects with Unknown Deformation Characteristics

Authors: Doganay Sirintuna, Alberto Giammarino, Arash Ajoudani

Abstract: In this work, we introduce an adaptive control framework for human-robot collaborative transportation of objects with unknown deformation behaviour. The proposed framework takes as input the haptic information transmitted through the object, and the kinematic information of the human body obtained from a motion capture system to create reactive whole-body motions on a mobile collaborative robot. I… ▽ More In this work, we introduce an adaptive control framework for human-robot collaborative transportation of objects with unknown deformation behaviour. The proposed framework takes as input the haptic information transmitted through the object, and the kinematic information of the human body obtained from a motion capture system to create reactive whole-body motions on a mobile collaborative robot. In order to validate our framework experimentally, we compared its performance with an admittance controller during a co-transportation task of a partially deformable object. We additionally demonstrate the potential of the framework while co-transporting rigid (aluminum rod) and highly deformable (rope) objects. A mobile manipulator which consists of an Omni-directional mobile base, a collaborative robotic arm, and a robotic hand is used as the robotic partner in the experiments. Quantitative and qualitative results of a 12-subjects experiment show that the proposed framework can effectively deal with objects of unknown deformability and provides intuitive assistance to human partners. △ Less

Submitted 21 July, 2022; v1 submitted 25 January, 2022; originally announced January 2022.

Comments: 7 pages, 7 figures, accepted at IEEE International Conference on Intelligent Robots and Systems (IROS 2022), for associated video, see https://youtu.be/ounQmCdYlC4

SUPER-MAN: SUPERnumerary Robotic Bodies for Physical Assistance in HuMAN-Robot Conjoined Actions

Authors: Alberto Giammarino, Juan M. Gandarias, Pietro Balatti, Mattia Leonori, Marta Lorenzini, Arash Ajoudani

Abstract: This paper presents a mobile supernumerary robotic approach to physical assistance in human-robot conjoined actions. The study starts with a description of the SUPER-MAN concept. The idea is to develop and utilize mobile collaborative systems that can follow human loco-manipulation commands to perform industrial tasks through three main components: i) an admittance-type interface, ii) a human-robo… ▽ More This paper presents a mobile supernumerary robotic approach to physical assistance in human-robot conjoined actions. The study starts with a description of the SUPER-MAN concept. The idea is to develop and utilize mobile collaborative systems that can follow human loco-manipulation commands to perform industrial tasks through three main components: i) an admittance-type interface, ii) a human-robot interaction controller, and iii) a supernumerary robotic body. Next, we present two possible implementations within the framework from theoretical and hardware perspectives. The first system is called MOCA-MAN and comprises a redundant torque-controlled robotic arm and an omnidirectional mobile platform. The second one is called Kairos-MAN, formed by a high-payload 6-DoF velocity-controlled robotic arm and an omnidirectional mobile platform. The systems share the same admittance interface, through which user wrenches are translated to loco-manipulation commands generated by whole-body controllers of each system. Besides, a thorough user study with multiple and cross-gender subjects is presented to reveal the quantitative performance of the two systems in effort-demanding and dexterous tasks. Moreover, we provide qualitative results from the NASA-TLX questionnaire to demonstrate the SUPER-MAN approach's potential and its acceptability from the users' viewpoint. △ Less

Submitted 1 February, 2023; v1 submitted 17 January, 2022; originally announced January 2022.

Comments: 16 pages, 14 figures. Associated video: https://youtu.be/_kfhLYQjhvA

An Online Multi-Index Approach to Human Ergonomics Assessment in the Workplace

Authors: Marta Lorenzini, Wansoo Kim, Arash Ajoudani

Abstract: Work-related musculoskeletal disorders (WMSDs) remain one of the major occupational safety and health problems in the European Union nowadays. Thus, continuous tracking of workers' exposure to the factors that may contribute to their development is paramount. This paper introduces an online approach to monitor kinematic and dynamic quantities on the workers, providing on the spot an estimate of th… ▽ More Work-related musculoskeletal disorders (WMSDs) remain one of the major occupational safety and health problems in the European Union nowadays. Thus, continuous tracking of workers' exposure to the factors that may contribute to their development is paramount. This paper introduces an online approach to monitor kinematic and dynamic quantities on the workers, providing on the spot an estimate of the physical load required in their daily jobs. A set of ergonomic indexes is defined to account for multiple potential contributors to WMSDs, also giving importance to the subject-specific requirements of the workers. To evaluate the proposed framework, a thorough experimental analysis was conducted on twelve human subjects considering tasks that represent typical working activities in the manufacturing sector. For each task, the ergonomic indexes that better explain the underlying physical load were identified, following a statistical analysis, and supported by the outcome of a surface electromyography (sEMG) analysis. A comparison was also made with a well-recognised and standard tool to evaluate human ergonomics in the workplace, to highlight the benefits introduced by the proposed framework. Results demonstrate the high potential of the proposed framework in identifying the physical risk factors, and therefore to adopt preventive measures. Another equally important contribution of this study is the creation of a comprehensive database on human kinodynamic measurements, which hosts multiple sensory data of healthy subjects performing typical industrial tasks. △ Less

Submitted 11 November, 2021; originally announced November 2021.

Comments: 12 pages, 8 figures, 3 tables, Submitted to IEEE Transactions on Human-Machine System

Dynamic Human-Robot Role Allocation based on Human Ergonomics Risk Prediction and Robot Actions Adaptation

Authors: Elena Merlo, Edoardo Lamon, Fabio Fusaro, Marta Lorenzini, Alessandro Carfì, Fulvio Mastrogiovanni, Arash Ajoudani, .

Abstract: Despite cobots have high potential in bringing several benefits in the manufacturing and logistic processes, but their rapid (re-)deployment in changing environments is still limited. To enable fast adaptation to new product demands and to boost the fitness of the human workers to the allocated tasks, we propose a novel method that optimizes assembly strategies and distributes the effort among the… ▽ More Despite cobots have high potential in bringing several benefits in the manufacturing and logistic processes, but their rapid (re-)deployment in changing environments is still limited. To enable fast adaptation to new product demands and to boost the fitness of the human workers to the allocated tasks, we propose a novel method that optimizes assembly strategies and distributes the effort among the workers in human-robot cooperative tasks. The cooperation model exploits AND/OR Graphs that we adapted to solve also the role allocation problem. The allocation algorithm considers quantitative measurements that are computed online to describe human operator's ergonomic status and task properties. We conducted preliminary experiments to demonstrate that the proposed approach succeeds in controlling the task allocation process to ensure safe and ergonomic conditions for the human worker. △ Less

Submitted 19 January, 2023; v1 submitted 5 November, 2021; originally announced November 2021.

Comments: 7 pages, 11 figures, presented at the 2022 IEEE International Conference on Robotics and Automation (ICRA)

Improving Standing Balance Performance through the Assistance of a Mobile Collaborative Robot

Authors: Francisco J. Ruiz-Ruiz, Alberto Giammarino, Marta Lorenzini, Juan M. Gandarias, Jesus M. Gomez-de-Gabriel, Arash Ajoudani

Abstract: This paper presents the design and development of a robotic system to give physical assistance to the elderly or people with neurological disorders such as Ataxia or Parkinson's. In particular, we propose using a mobile collaborative robot with an interaction-assistive whole-body interface to help people unable to maintain balance. The robotic system consists of an Omni-directional mobile base, a… ▽ More This paper presents the design and development of a robotic system to give physical assistance to the elderly or people with neurological disorders such as Ataxia or Parkinson's. In particular, we propose using a mobile collaborative robot with an interaction-assistive whole-body interface to help people unable to maintain balance. The robotic system consists of an Omni-directional mobile base, a high-payload robotic arm, and an admittance-type interface acting as a support handle while measuring human-sourced interaction forces. The postural balance of the human body is estimated through the projection of the body Center of Mass (CoM) to the support polygon (SP) representing the quasi-static Center of Pressure (CoP). In response to the interaction forces and the tracking of the human posture, the robot can create assistive forces to restore balance in case of its loss. Otherwise, during normal stance or walking, it will follow the user with minimum/no opposing forces through the generation of coupled arm and base movements. As the balance-restoring strategy, we propose two strategies and evaluate them in a laboratory setting on healthy human participants. Quantitative and qualitative results of a 12-subjects experiment are then illustrated and discussed, comparing the performances of the two strategies and the overall system. △ Less

Submitted 3 March, 2022; v1 submitted 24 September, 2021; originally announced September 2021.

Comments: 8 pages, 5 figures, accepted at IEEE International Conference on Robotics and Automation (ICRA 2022), video available at: https://www.youtube.com/watch?v=zPE_YKJCy-s

An Online Framework for Cognitive Load Assessment in Assembly Tasks

Authors: Marta Lagomarsino, Marta Lorenzini, Elena De Momi, Arash Ajoudani

Abstract: The ongoing trend towards Industry 4.0 has revolutionised ordinary workplaces, profoundly changing the role played by humans in the production chain. Research on ergonomics in industrial settings mainly focuses on reducing the operator's physical fatigue and discomfort to improve throughput and avoid safety hazards. However, as the production complexity increases, the cognitive resources demand an… ▽ More The ongoing trend towards Industry 4.0 has revolutionised ordinary workplaces, profoundly changing the role played by humans in the production chain. Research on ergonomics in industrial settings mainly focuses on reducing the operator's physical fatigue and discomfort to improve throughput and avoid safety hazards. However, as the production complexity increases, the cognitive resources demand and mental workload could compromise the operator's performance and the efficiency of the shop floor workplace. State-of-the-art methods in cognitive science work offline and/or involve bulky equipment hardly deployable in industrial settings. This paper presents a novel method for online assessment of cognitive load in manufacturing, primarily assembly, by detecting patterns in human motion directly from the input images of a stereo camera. Head pose estimation and skeleton tracking are exploited to investigate the workers' attention and assess hyperactivity and unforeseen movements. Pilot experiments suggest that our factor assessment tool provides significant insights into workers' mental workload, even confirmed by correlations with physiological and performance measurements. According to data gathered in this study, a vision-based cognitive load assessment has the potential to be integrated into the development of mechatronic systems for improving cognitive ergonomics in manufacturing. △ Less

Submitted 19 October, 2021; v1 submitted 8 September, 2021; originally announced September 2021.

Journal ref: Robotics and Computer-Integrated Manufacturing, Volume 78, December 2022

An Integrated Dynamic Method for Allocating Roles and Planning Tasks for Mixed Human-Robot Teams

Authors: Fabio Fusaro, Edoardo Lamon, Elena De Momi, Arash Ajoudani

Abstract: This paper proposes a novel integrated dynamic method based on Behavior Trees for planning and allocating tasks in mixed human robot teams, suitable for manufacturing environments. The Behavior Tree formulation allows encoding a single job as a compound of different tasks with temporal and logic constraints. In this way, instead of the well-studied offline centralized optimization problem, the rol… ▽ More This paper proposes a novel integrated dynamic method based on Behavior Trees for planning and allocating tasks in mixed human robot teams, suitable for manufacturing environments. The Behavior Tree formulation allows encoding a single job as a compound of different tasks with temporal and logic constraints. In this way, instead of the well-studied offline centralized optimization problem, the role allocation problem is solved with multiple simplified online optimization sub-problem, without complex and cross-schedule task dependencies. These sub-problems are defined as Mixed-Integer Linear Programs, that, according to the worker-actions related costs and the workers' availability, allocate the yet-to-execute tasks among the available workers. To characterize the behavior of the developed method, we opted to perform different simulation experiments in which the results of the action-worker allocation and computational complexity are evaluated. The obtained results, due to the nature of the algorithm and to the possibility of simulating the agents' behavior, should describe well also how the algorithm performs in real experiments. △ Less

Submitted 19 January, 2023; v1 submitted 25 May, 2021; originally announced May 2021.

Comments: 6 pages, 5 figures, presented at the 30th IEEE International Conference on Robot and Human Interactive Communication

Quantitative Physical Ergonomics Assessment of Teleoperation Interfaces

Authors: Soheil Gholami, Marta Lorenzini, Elena De Momi, Arash Ajoudani

Abstract: Human factors and ergonomics are the essential constituents of teleoperation interfaces, which can significantly affect the human operator's performance. Thus, a quantitative evaluation of these elements and the ability to establish reliable comparison bases for different teleoperation interfaces are the keys to select the most suitable one for a particular application. However, most of the works… ▽ More Human factors and ergonomics are the essential constituents of teleoperation interfaces, which can significantly affect the human operator's performance. Thus, a quantitative evaluation of these elements and the ability to establish reliable comparison bases for different teleoperation interfaces are the keys to select the most suitable one for a particular application. However, most of the works on teleoperation have so far focused on the stability analysis and the transparency improvement of these systems, and do not cover the important usability aspects. In this work, we propose a foundation to build a general framework for the analysis of human factors and ergonomics in employing diverse teleoperation interfaces. The proposed framework will go beyond the traditional subjective analyses of usability by complementing it with online measurements of the human body configurations. As a result, multiple quantitative metrics such as joints' usage, range of motion comfort, center of mass divergence, and posture comfort are introduced. To demonstrate the potential of the proposed framework, two different teleoperation interfaces are considered, and real-world experiments with eleven participants performing a simulated industrial remote pick-and-place task are conducted. The quantitative results of this analysis are provided, and compared with subjective questionnaires, illustrating the effectiveness of the proposed framework. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Comments: 10 pages, 9 figures, submitted to IEEE Transactions on Human-Machine Systems

Enhancing Flexibility and Adaptability in Conjoined Human-Robot Industrial Tasks with a Minimalist Physical Interface

Authors: Juan M. Gandarias, Pietro Balatti, Edoardo Lamon, Marta Lorenzini, Arash Ajoudani

Abstract: This paper presents a physical interface for collaborative mobile manipulators in industrial manufacturing and logistics applications. The proposed work builds on our earlier MOCA-MAN interface, through which an operator could be physically coupled to a mobile manipulator to be assisted in performing daily activities. The previous interface was based on a magnetic clamp attached to one arm of the… ▽ More This paper presents a physical interface for collaborative mobile manipulators in industrial manufacturing and logistics applications. The proposed work builds on our earlier MOCA-MAN interface, through which an operator could be physically coupled to a mobile manipulator to be assisted in performing daily activities. The previous interface was based on a magnetic clamp attached to one arm of the user for the coupling stage, and a bracelet based on EMG sensors on the other arm for human-robot communication via gestures. The new interface instead presents the following additions: i) An industrial-like design that allows the worker to couple/decouple easily and to operate mobile manipulators locally; ii) A simplistic communication channel via a simple buttons board that allows controlling the robot with one hand only; iii) The interface offers enhanced loco-manipulation capabilities that do not compromise the worker mobility. In addition, an experimental evaluation with six human subjects is carried out to analyze the enhanced locomotion and flexibility of the proposed interface in terms of mobility constraint, usability, and physical load reduction. △ Less

Submitted 19 January, 2023; v1 submitted 20 May, 2021; originally announced May 2021.

Comments: 7 pages, 6 figures, presented at IEEE International Conference on Robotics and Automation (ICRA 2022). Video available at: https://youtu.be/cDQK7Sy3p2Q