Showing 1–38 of 38 results for author: Yin, H

High magnetic field phase diagram and weak FM breaking in (Ni0.93Co0.07)3V2O8

Authors: Jiating Wu, Minjie Zhang, Ke Shi, Huxin Yin, Yuyan Han, Lansheng Ling, Wei Tong, Chuanying Xi, Li Pi, Zhaosheng Wang

Abstract: We present magnetostriction and thermal expansion measurements on multiferroic (Ni0.93Co0.07)3V2O8. The high field phase diagrams up to 33 T along the a, b and c directions are built. For H//a, as the magnetic field increases, two intermediate phases appear between the incommensurate phase and the paramagnetic phase at about 7 K, and then a magnetically induced phase appears above the paramagnetic… ▽ More We present magnetostriction and thermal expansion measurements on multiferroic (Ni0.93Co0.07)3V2O8. The high field phase diagrams up to 33 T along the a, b and c directions are built. For H//a, as the magnetic field increases, two intermediate phases appear between the incommensurate phase and the paramagnetic phase at about 7 K, and then a magnetically induced phase appears above the paramagnetic phase. For H//b,thermal expansion measurement indicates a mutation in the spin lattice coupling of the high field phases. The interlaced phase boundary suggests a mixed state in the optical high field phase. For H//c, an intermediate phase between the commensurate phase and the incommensurate phase is detected. A nonlinear boundary between the intermediate phase and the low temperature incommensurate phase, and a clear boundary between the commensurate phase and the paramagnetic phase are found. These results indicate that do** Co2+ breaks the weak ferromagnetic moment of the commensurate phase, which exists in the parent compound Ni3V2O8 and (Ni0.9Co0.1)3V2O8. This nonlinear influence reflects complicated spin modulation in Ni3V2O8 by do** Co2+. △ Less

Submitted 31 December, 2023; originally announced January 2024.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. B 108, 214108(2023)

Coherence in resonance fluorescence

Authors: Xu-Jie Wang, Guoqi Huang, Ming-Yang Li, Yuan-Zhuo Wang, Li Liu, Bang Wu, Hanqing Liu, Haiqiao Ni, Zhichuan Niu, Weijie Ji, Rongzhen Jiao, Hua-Lei Yin, Zhiliang Yuan

Abstract: Resonance fluorescence (RF) of a two-level emitter displays persistently anti-bunching irrespective of the excitation intensity, but inherits the driving laser's linewidth under weak excitation. These properties are commonly explained disjoinedly as the emitter's single photon saturation or passively scattering light, until a recent theory attributes anti-bunching to the laser-like spectrum's inte… ▽ More Resonance fluorescence (RF) of a two-level emitter displays persistently anti-bunching irrespective of the excitation intensity, but inherits the driving laser's linewidth under weak excitation. These properties are commonly explained disjoinedly as the emitter's single photon saturation or passively scattering light, until a recent theory attributes anti-bunching to the laser-like spectrum's interference with the incoherently scattered light. However, the theory implies higher-order scattering processes, and led to an experiment purporting to validate an atom's simultaneous scattering of two photons. If true, it could complicate RF's prospects in quantum information applications. Here, we propose a unified model that treats all RF photons as spontaneous emission, one at a time, and can explain simultaneously both the RF's spectral and correlation properties. We theoretically derive the excitation power dependencies, with the strongest effects measurable at the single-photon incidence level, of the first-order coherence of the whole RF and super-bunching of the spectrally filtered, followed by experimental confirmation on a semiconductor quantum dot micro-pillar device. Furthermore, our model explains peculiar coincidence bunching observed in phase-dependent two-photon interference experiments. Our work provides novel understandings of coherent light-matter interaction and may stimulate new applications. △ Less

Submitted 30 May, 2024; v1 submitted 21 December, 2023; originally announced December 2023.

Comments: Equation 4 is updated to cover all two-level emitters, with or without a cavity

Twofold Symmetry Observed in Bi$_{2}$Te$_{3}$/FeTe Interfacial Superconductor

Authors: Xinru Han, Hailang Qin, Tianluo Pan, Bin Guo, Kaige Shi, Zi** Huang, Jie Jiang, Hangyu Yin, Hongtao He, Fei Ye, Wei-Qiang Chen, Jia-Wei Mei, Gan Wang

Abstract: Superconducting pairing symmetry are crucial in understanding the microscopic superconducting mechanism of a superconductor. Here we report the observation of a twofold superconducting gap symmetry in an interfacial superconductor Bi$_{2}$Te$_{3}$/FeTe, by employing quasiparticle interference (QPI) technique in scanning tunneling microscopy and macroscopic magnetoresistance measurements. The QPI p… ▽ More Superconducting pairing symmetry are crucial in understanding the microscopic superconducting mechanism of a superconductor. Here we report the observation of a twofold superconducting gap symmetry in an interfacial superconductor Bi$_{2}$Te$_{3}$/FeTe, by employing quasiparticle interference (QPI) technique in scanning tunneling microscopy and macroscopic magnetoresistance measurements. The QPI patterns corresponding to energies inside and outside the gap reveal a clear anisotropic superconducting gap. Furthermore, both the in-plane angle-dependent magnetoresistance and in-plane upper critical field exhibit a clear twofold symmetry. This twofold symmetry align with the Te-Te direction in FeTe, which weakens the possible generation by bi-collinear antiferromagnetism order. Our finding provides key information in further understanding of the topological properties in Bi$_{2}$Te$_{3}$/FeTe superconducting system and propels further theoretical interests in the paring mechanism in the system. △ Less

Submitted 25 August, 2023; v1 submitted 12 July, 2023; originally announced July 2023.

Thermoelectric properties of cement composite analogues from first principles calculations

Authors: Esther Orisakwe, Conrad Johnston, Ruchita Jani, Xiaoli Liu, Lorenzo Stella, Jorge Kohanoff, Niall Holmes, Brian Norton, Ming Qu, Hongxi Yin, Kazuaki Yazawa

Abstract: Buildings are responsible for a considerable fraction of the energy wasted globally every year, and as a result, excess carbon emissions. While heat is lost directly in colder months and climates, resulting in increased heating loads, in hot climates cooling and ventilation is required. One avenue towards improving the energy efficiency of buildings is to integrate thermoelectric devices and mater… ▽ More Buildings are responsible for a considerable fraction of the energy wasted globally every year, and as a result, excess carbon emissions. While heat is lost directly in colder months and climates, resulting in increased heating loads, in hot climates cooling and ventilation is required. One avenue towards improving the energy efficiency of buildings is to integrate thermoelectric devices and materials within the fabric of the building to exploit the temperature gradient between the inside and outside to do useful work. Cement-based materials are ubiquitous in modern buildings and present an interesting opportunity to be functionalised. We present a systematic investigation of the electronic transport coefficients relevant to the thermoelectric materials of the calcium silicate hydrate (C-S-H) gel analogue, tobermorite, using Density Functional Theory calculations with the Boltzmann transport method. The calculated values of the Seebeck coefficient are within the typical magnitude (200 - 600 $μV/K$) indicative of a good thermoelectric material. The tobermorite models are predicted to be intrinsically $p$-type thermoelectric material because of the presence of large concentration of the Si-O tetrahedra sites. The calculated electronic $ZT$ for the tobermorite models have their optimal values of 0.983 at (400 $\mathrm{K}$ and $10^{17}$ $\mathrm{cm^{-3}}$) for tobermorite 9 Å, 0.985 at (400 $\mathrm{K}$ and $10^{17}$ $\mathrm{cm^{-3}}$) for tobermorite 11 Å and 1.20 at (225 $\mathrm{K}$ and $10^{19}$ $\mathrm{cm^{-3}}$) for tobermorite 14 Å, respectively. △ Less

Submitted 30 November, 2022; originally announced November 2022.

Comments: 34 pages, 10 figures

Nonlinear Indentation of Second-order Hyperelastic Materials

Authors: Yangkun Du, Peter Stewart, Nicholas A Hill, Huabing Yin, Raimondo Penta, Jakub Kory, Xiaoyu Luo, Raymond Ogden

Abstract: The classical problem of indentation on an elastic substrate has found new applications in the field of the Atomic Force Microscopy. However, linearly elastic indentation models are not sufficiently accurate to predict the force-displacement relationship at large indentation depths. For hyperelastic materials, such as soft polymers and biomaterials, a nonlinear indentation model is needed. In this… ▽ More The classical problem of indentation on an elastic substrate has found new applications in the field of the Atomic Force Microscopy. However, linearly elastic indentation models are not sufficiently accurate to predict the force-displacement relationship at large indentation depths. For hyperelastic materials, such as soft polymers and biomaterials, a nonlinear indentation model is needed. In this paper, we use second-order elasticity theory to capture larger amplitude deformations and material nonlinearity. We provide a general solution for the contact problem for deformations that are second-order in indentation amplitude with arbitrary indenter profiles. Moreover, we derive analytical solutions by using either parabolic or quartic surfaces to mimic a spherical indenter. The analytical prediction for a quartic surface agrees well with finite element simulations using a spherical indenter for indentation depths on the order of the indenter radius. In particular, the relative error between the two approaches is less than 1% for an indentation depth equal to the indenter radius, an order of magnitude less than that observed with models which are either first-order in indentation amplitude or those which are second-order in indentation amplitude but with a parabolic indenter profile. △ Less

Submitted 12 September, 2022; originally announced September 2022.

Homogenization of discrete diffusion models by asymptotic expansion

Authors: Jan Eliáš, Hao Yin, Gianluca Cusatis

Abstract: Diffusion behaviors of heterogeneous materials are of paramount importance in many engineering problems. Numerical models that take into account the internal structure of such materials are robust but computationally very expensive. This burden can be partially decreased by using discrete models, however even then the practical application is limited to relatively small material volumes. This pa… ▽ More Diffusion behaviors of heterogeneous materials are of paramount importance in many engineering problems. Numerical models that take into account the internal structure of such materials are robust but computationally very expensive. This burden can be partially decreased by using discrete models, however even then the practical application is limited to relatively small material volumes. This paper formulates a homogenization scheme for discrete diffusion models. Asymptotic expansion homogenization is applied to distinguish between (i) the continuous macroscale description approximated by the standard finite element method and (ii) the fully resolved discrete mesoscale description in a local representative volume element (RVE) of material. Both transient and steady-state variants with nonlinear constitutive relations are discussed. In all the cases, the resulting discrete RVE problem becomes a simple linear steady-state problem that can be easily pre-computed. The scale separation provides a significant reduction of computational time allowing the solution of practical problems with a negligible error introduced mainly by the finite element discretization at the macroscale. △ Less

Submitted 3 September, 2022; originally announced September 2022.

Comments: 33 pages, 12 figures

ACM Class: J.6

Journal ref: International Journal for Numerical and Analytical Methods in Geomechanics 46(16), pages 3052-3073, 2022

An automated approach for consecutive tuning of quantum dot arrays

Authors: Hanwei Liu, Baochuan Wang, Ning Wang, Zhonghai Sun, Huili Yin, Haiou Li, Gang Cao, Guo** Guo

Abstract: Recent progress has shown that the dramatically increased number of parameters has become a major issue in tuning of multi-quantum dot devices. The complicated interactions between quantum dots and gate electrodes cause the manual tuning process to no longer be efficient. Fortunately, machine learning techniques can automate and speed up the tuning of simple quantum dot systems. In this letter, we… ▽ More Recent progress has shown that the dramatically increased number of parameters has become a major issue in tuning of multi-quantum dot devices. The complicated interactions between quantum dots and gate electrodes cause the manual tuning process to no longer be efficient. Fortunately, machine learning techniques can automate and speed up the tuning of simple quantum dot systems. In this letter, we extend the techniques to tune multi-dot devices. We propose an automated approach that combines machine learning, virtual gates and a local-to-global method to realize the consecutive tuning of quantum dot arrays by dividing them into subsystems. After optimizing voltage configurations and establishing virtual gates to control each subsystem independently, a quantum dot array can be efficiently tuned to the few-electron regime with appropriate interdot tunnel coupling strength. Our experimental results show that this approach can consecutively tune quantum dot arrays into an appropriate voltage range without human intervention and possesses broad application prospects in large-scale quantum dot devices. △ Less

Submitted 25 August, 2022; originally announced August 2022.

Comments: 11 pages,4 figures

Journal ref: Appl. Phys. Lett. 121, 084002 (2022)

Probing the atomically diffuse interfaces in core-shell nanoparticles in three dimensions

Authors: Zezhou Li, Zhiheng Xie, Yao Zhang, Xilong Mu, Hai-**g Yin, Ya-wen Zhang, Colin Ophus, Jihan Zhou

Abstract: Deciphering the three-dimensional atomic structure of solid-solid interfaces in core-shell nanomaterials is the key to understand their remarkable catalytical, optical and electronic properties. Here, we probe the three-dimensional atomic structures of palladium-platinum core-shell nanoparticles at the single-atom level using atomic resolution electron tomography. We successfully quantify the rich… ▽ More Deciphering the three-dimensional atomic structure of solid-solid interfaces in core-shell nanomaterials is the key to understand their remarkable catalytical, optical and electronic properties. Here, we probe the three-dimensional atomic structures of palladium-platinum core-shell nanoparticles at the single-atom level using atomic resolution electron tomography. We successfully quantify the rich structural variety of core-shell nanoparticles including bond length, coordination number, local bond orientation order, grain boundary, and five-fold symmetry, all in 3D at atomic resolution. Instead of forming an atomically-sharp boundary, the core-shell interface is atomically diffuse with an average thickness of 4.2 A, irrespective of the particle's size, morphology, or crystallographic texture. The high concentration of Pd in the interface is highly related to the electric double layers of the Pd seeds. These results advance our understanding of core-shell structures at the fundamental level, providing potential strategies into nanomaterial manipulation and chemical property regulation. △ Less

Submitted 17 July, 2022; originally announced July 2022.

Comments: 41 pages, 18 figures

Ultra-fast synthesis and thermodynamic analysis of MoAlB by self-propagating high temperature combustion synthesis

Authors: Hang Yin, Xiaodong He, Guang** Song, Yongdong Yu, Yongting Zheng, Yuelei Bai

Abstract: MoAlB as a typical member of the MAB phases has attracted much growing attention due to its unique properties. However, the low production of MoAlB powders limits its further development and potential applications. To respond this challenge, the ultra-fast preparation of high-purity MoAlB powders is achieved in a few seconds by self-propagating high temperature combustion synthesis (SHS) using the… ▽ More MoAlB as a typical member of the MAB phases has attracted much growing attention due to its unique properties. However, the low production of MoAlB powders limits its further development and potential applications. To respond this challenge, the ultra-fast preparation of high-purity MoAlB powders is achieved in a few seconds by self-propagating high temperature combustion synthesis (SHS) using the raw powder mixture at the atomic ratio of 1Mo/1.3Al/1B. The reaction mechanism in SHS process was obtained by analyzing the corresponding composition changes of starting materials. Furthermore, the thermodynamic prediction for the SHS reaction of Mo + (1+y)Al + B = MoAlB + yAl is consistent with the present experiments, where the preparation of MoAlB also conforms to two common self-propagating conditions of SHS. Enthalpy vs temperature curve shows that the adiabatic temperature of the reaction decreases with increasing the amount of excuse Al, but increase when pre-heating the reactants. The thermodynamic calculation method also provides a new idea for the preparation of other MAB phases by SHS. △ Less

Submitted 27 June, 2022; originally announced June 2022.

Strain-driven valley states and phase transitions in Janus VSiGeN4 monolayer

Authors: Pengyu Liu, Siyuan Liu, Minglei Jia, Huabing Yin, Guangbiao Zhang, Fengzhu Ren, Bing Wang, Chang Liu

Abstract: The interplay between topology and valley degree of freedom has attracted much interest because it can realize new phenomena and applications. Here, based on first-principles calculations, we demonstrate intrinsically valley-polarized quantum anomalous Hall effect in monolayer ferrovalley material: Janus VSiGeN4, of which the edge states are chiral-spin-valley locking. Besides, a small tensile or… ▽ More The interplay between topology and valley degree of freedom has attracted much interest because it can realize new phenomena and applications. Here, based on first-principles calculations, we demonstrate intrinsically valley-polarized quantum anomalous Hall effect in monolayer ferrovalley material: Janus VSiGeN4, of which the edge states are chiral-spin-valley locking. Besides, a small tensile or compressive strain can drive phase transition in the material from valley-polarized quantum anomalous Hall state to half-valley-metal state. With the increase of the strain, the material turns into ferrovalley semiconductor with valley anomalous Hall effect. The origin of phase transition is sequent band inversion of V d orbital at K valley. Moreover, we find that phase transition causes the sign reversal of Berry curvature and induces different polarized light absorption in different valley states. Our work provides an ideal material platform for practical applications and experimental exploration of the interplay between topology, spintronics, and valleytronics. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Comments: 8 pages, 6 figures

Rationalizing the influence of tunable energy levels on quantum efficiency to design optimal non-fullerene acceptor-based ternary organic solar cells

Authors: Safakath Karuthedath, Sri H. K . Paleti, Anirudh Sharma, Hang Yin, Catherine S. P. De Castro, Si Chen, Han Xi, Nisreen Alshehri, Nicolas Ramos, Jafar I. Khan, Jaime Martin, Gang Li, Frédéric Laquai, Derya Baran, Julien Gorenflot

Abstract: Non-fullerene acceptor (NFA)-based ternary bulk heterojunction solar cells (TSC) are the most efficient organic solar cells (OSCs) today due to their broader absorption and quantum efficiencies (QE) often surpassing those of corresponding binary blends. We study how the energetics driving charge transfer at the electron donor:electron acceptor (D/A) interfaces impact the QE in blends of PBDB-T-2F… ▽ More Non-fullerene acceptor (NFA)-based ternary bulk heterojunction solar cells (TSC) are the most efficient organic solar cells (OSCs) today due to their broader absorption and quantum efficiencies (QE) often surpassing those of corresponding binary blends. We study how the energetics driving charge transfer at the electron donor:electron acceptor (D/A) interfaces impact the QE in blends of PBDB-T-2F donor with several pairs of lower bandgap NFAs. As in binary blends, the ionization energy offset between donor and acceptor (ΔIE) controls the QE and maximizes for ΔIE > 0.5 eV. However, ΔIE is not controlled by the individual NFAs IEs but by their average, weighted for their blending ratio. Using this property, we improved the QE of a PBDB-T-2F:IEICO binary blend that had an insufficient ΔIE for charge generation by adding a deep IE third component: IT-4F. Combining two NFAs enables to optimize the D/A energy alignment and cells' QE without molecular engineering. △ Less

Submitted 12 February, 2023; v1 submitted 12 December, 2021; originally announced December 2021.

Comments: S Karuthedath and S H K Paleti contributed equally. MS: 35 pages, 9 figures. SI: 21 pages, 23 figures - updates: added a model scheme as Fig1, updated T1 EQE and blends PL in Fig 2 (former 1). Added Figure (5): charge generation upon acceptor excitation. Corrected ΔIEs in fig7 and 9 (a few tens of meV off). Added more blends to show generality (2 groups, 10 blends compositions)

Journal ref: Adv. Energy Mater. 2023, 2203464

Tunable magnetism in ferroelectric α-In2Se3 by hole-do**

Authors: Chang Liu, Bing Wang, Guanwei Jia, Pengyu Liu, Huabing Yin, Shan Guan, Zhenxiang Cheng

Abstract: Two-dimensional (2D) multiferroics attract intensive investigations because of underlying science and their potential applications. Although many 2D systems have been observed/predicted to be ferroelectric or ferromagnetic, 2D materials with both ferroic properties are still scarce. By using first-principles calculations, we predict that hole-do** can induce robust ferromagnetism in 2D ferroelec… ▽ More Two-dimensional (2D) multiferroics attract intensive investigations because of underlying science and their potential applications. Although many 2D systems have been observed/predicted to be ferroelectric or ferromagnetic, 2D materials with both ferroic properties are still scarce. By using first-principles calculations, we predict that hole-do** can induce robust ferromagnetism in 2D ferroelectric α-In2Se3 due to its unique flat band structure, and the Curie temperature (TC) can be much higher than room temperature. Moreover, the do** concentration, strain, and number of layers can effectively modulate the magnetic moment and the TC of the material. Interestingly, strong magnetoelectric coupling is found at the surface of hole doped multilayer α-In2Se3, which allows non-volatile electric control of magnetization. Our work provides a feasible approach for designing/searching 2D multiferroics with great potential in future device applications, such as memory devices and sensors. △ Less

Submitted 17 February, 2021; originally announced February 2021.

Journal ref: Appl. Phys. Lett. 118, 072902 (2021);

Strain-tunable magnetism and nodal loops in monolayer MnB

Authors: Chang Liu, Botao Fu, Huabing Yin, Guangbiao Zhang, Chao Dong

Abstract: Designing two-dimensional (2D) materials with magnetic and topological properties has continuously attracted intense interest in fundamental science and potential applications. Here, on the basis of first-principles calculations, we predict the coexistence of antiferromagnetism and Dirac nodal loop (NL) in the monolayer MnB, where the band crossing points are very close to the Fermi Level. Remarka… ▽ More Designing two-dimensional (2D) materials with magnetic and topological properties has continuously attracted intense interest in fundamental science and potential applications. Here, on the basis of first-principles calculations, we predict the coexistence of antiferromagnetism and Dirac nodal loop (NL) in the monolayer MnB, where the band crossing points are very close to the Fermi Level. Remarkably, a moderate strain can induce an antiferromagnetic to ferromagnetic phase transition, driving the monolayer MnB to a ferromagnetic metal with Weyl NLs. Such a type of topological quantum phase transition has not been observed before. In addition, the symmetry-protected properties of the two types of NLs as well as the magnetic critical temperatures are investigated. The controllable magnetic and topological order in monolayer MnB offers a unique platform for exploring topological quantum phase transitions and realizing nanospintronic devices. △ Less

Submitted 6 September, 2020; originally announced September 2020.

Prediction of superconductivity and topological aspects in single-layer $β$-Bi$_{2}$Pd

Authors: Peng-Fei Liu, **gyu Li, Xin-Hai Tu, Huabing Yin, Baisheng Sa, Junrong Zhang, David J. Singh, Bao-Tian Wang

Abstract: Topological superconductors, characterized by topologically nontrivial states residing in a superconducting gap, are a recently discovered class of materials having Majorana Fermions. The interplay of superconductivity and topological states give rise to opportunities for achieving such topological superconductors in condensed matter systems. Up to now, several single-material topological supercon… ▽ More Topological superconductors, characterized by topologically nontrivial states residing in a superconducting gap, are a recently discovered class of materials having Majorana Fermions. The interplay of superconductivity and topological states give rise to opportunities for achieving such topological superconductors in condensed matter systems. Up to now, several single-material topological superconductors in this form have been theoretically predicted and experimentally confirmed. Here, using the first-principles calculations, we study the superconducting single-layer $β$-Bi$_{2}$Pd. The electronic density of states near Fermi level of this monolayer are dominated by the Bi-p and Pd-d orbitals, forming a two-band Fermi surface with multi-class sheets. The presence of soft phonon bands, in cooperation with the electron susceptibility, account for electron-phonon superconductivity of single-layer $β$-Bi$_{2}$Pd. With the centrosymmetric structure, single-layer $β$-Bi$_{2}$Pd possesses a continuous gap over the whole Brillouin zone and topological Dirac-like states at its one-dimensional boundary. The present findings would lead to the expectation of one-dimensional topological superconductivity and Majorana bound states in monolayer candidate of $β$-Bi$_{2}$Pd with intrinsic full-gap superconductivity. △ Less

Submitted 17 September, 2020; v1 submitted 18 June, 2020; originally announced June 2020.

Comments: 7 figures

Journal ref: Phys. Rev. B 102, 155406 (2020)

Defect-Correlated Skyrmions and Controllable Generation in Perpendicularly Magnetized CoFeB Ultrathin Films

Authors: Haihong Yin, Xiangyu Zheng, Junlin Wang, Yu Zhou, Balati Kuerbanjiang, Guanqi Li, Xianyang Lu, Yichuan Wang, **g Wu, Vlado K. Lazarov, Richard F. L. Evans, Roy W. Chantre, Jianwang Cai, Bo Liu, Hao Meng, Yongbing Xu

Abstract: Skyrmions have attracted significant interest due to their topological spin structures and fascinating physical features. The skyrmion phase arises in materials with Dzyaloshinskii-Moriya (DM) interaction at interfaces or in volume of non-centrosymmetric materials. However, although skyrmions were generated experimentally, one critical intrinsic relationship between fabrication, microstructures, m… ▽ More Skyrmions have attracted significant interest due to their topological spin structures and fascinating physical features. The skyrmion phase arises in materials with Dzyaloshinskii-Moriya (DM) interaction at interfaces or in volume of non-centrosymmetric materials. However, although skyrmions were generated experimentally, one critical intrinsic relationship between fabrication, microstructures, magnetization and the existence of skyrmions remains to be established. Here, two series of CoFeB ultrathin films with controlled atomic scale structures are employed to reveal this relationship. By inverting the growth order, the amount of defects can be artificially tuned, and skyrmions are shown to be preferentially formed at defect sites. The stable region and the density of the skyrmions can be efficiently controlled in the return magnetization loops by utilizing first-order reversal curves to reach various metastable states. These findings establish the general and intrinsic relationship from sample preparation to skyrmion generation, offering an universal method to control skyrmion density. △ Less

Submitted 4 June, 2020; originally announced June 2020.

Comments: 25 pages, 5 figures

Defect Level Switching for Highly-Nonlinear and Hysteretic Electronic Devices

Authors: Han Yin, Abinash Kumar, James M. LeBeau, R. Jaramillo

Abstract: Nonlinear and hysteretic electrical devices are needed for applications from circuit protection to next-generation computing. Widely-studied devices for resistive switching are based on mass transport, such as the drift of ions in an electric field, and on collective phenomena, such as insulator-metal transitions. We ask whether the large photoconductive response known in many semiconductors can b… ▽ More Nonlinear and hysteretic electrical devices are needed for applications from circuit protection to next-generation computing. Widely-studied devices for resistive switching are based on mass transport, such as the drift of ions in an electric field, and on collective phenomena, such as insulator-metal transitions. We ask whether the large photoconductive response known in many semiconductors can be stimulated in the dark and harnessed to design electrical devices. We design and test devices based on photoconductive CdS, and our results are consistent with the hypothesis that resistive switching arises from point defects that switch between deep- and shallow-donor configurations: defect level switching (DLS). This new electronic device design principle - photoconductivity without photons - leverages decades of research on photoconductivity and defect spectroscopy. It is easily generalized and will enable the rational design of new nonlinear, hysteretic devices for future electronics. △ Less

Submitted 16 May, 2020; originally announced May 2020.

Comments: Text and supplemental merged into one file

Journal ref: Phys. Rev. Applied 15, 014014 (2021)

Predicting Large-Chern-Number Phases in a Shaken Optical Dice Lattice

Authors: Shujie Cheng, Honghao Yin, Zhanpeng Lu, Chaocheng He, Pei Wang, Gao Xianlong

Abstract: With respect to the quantum anomalous Hall effect (QAHE), the detection of topological nontrivial large-Chern-number phases is an intriguing subject. Motivated by recent research on Floquet topological phases, this study proposes a periodic driving protocol to engineer large-Chern-number phases using QAHE. Herein, spinless ultracold fermionic atoms are studied in a two-dimensional optical dice lat… ▽ More With respect to the quantum anomalous Hall effect (QAHE), the detection of topological nontrivial large-Chern-number phases is an intriguing subject. Motivated by recent research on Floquet topological phases, this study proposes a periodic driving protocol to engineer large-Chern-number phases using QAHE. Herein, spinless ultracold fermionic atoms are studied in a two-dimensional optical dice lattice with nearest-neighbor hop** and a $Λ$/V-type sublattice potential subjected to a circular driving force. Results suggest that large-Chern-number phases exist with Chern numbers equal to $C=-2$, which is consistent with the edge-state energy spectra. △ Less

Submitted 29 January, 2020; originally announced January 2020.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. A 101, 043620 (2020)

Localization driven superradiant instability

Authors: Honghao Yin, Jie Hu, An-Chun Ji, G. Juzeliunas, Xiong-jun Liu, Qing Sun

Abstract: The prominent Dicke superradiant phase arises from coupling an ensemble of atoms to cavity optical field when external optical pum** exceeds a threshold strength. Here we report a prediction of the superrandiant instability driven by Anderson localization, realized with a hybrid system of Dicke and Aubry-Andre (DAA) model for bosons trapped in a one-dimensional (1D) quasiperiodic optical lattice… ▽ More The prominent Dicke superradiant phase arises from coupling an ensemble of atoms to cavity optical field when external optical pum** exceeds a threshold strength. Here we report a prediction of the superrandiant instability driven by Anderson localization, realized with a hybrid system of Dicke and Aubry-Andre (DAA) model for bosons trapped in a one-dimensional (1D) quasiperiodic optical lattice and coupled to a cavity. Our central finding is that for bosons condensed in localized phase given by the DAA model, the resonant superradiant scattering is induced, for which the critical optical pum** of superradiant phase transition approaches zero, giving an instability driven by Anderson localization. The superradiant phase for the DAA model with or without a mobility edge is investigated, showing that the localization driven superradiant instability is in sharp contrast to the superradiance as widely observed for Bose condensate in extended states, and should be insensitive to temperature of the system. This study unveils an insightful effect of localization on the Dicke superradiance, and is well accessible based on the current experiments. △ Less

Submitted 17 September, 2019; originally announced September 2019.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 124, 113601 (2020)

Binding potentials for vapour nanobubbles on surfaces using density functional theory

Authors: Hanyu Yin, David N. Sibley, Andrew J. Archer

Abstract: We calculate density profiles of a simple model fluid in contact with a planar surface using density functional theory (DFT), in particular for the case where there is a vapour layer intruding between the wall and the bulk liquid. We apply the method of Hughes et al. [J. Chem. Phys. 142, 074702 (2015)] to calculate the density profiles for varying (specified) amounts of the vapour adsorbed at the… ▽ More We calculate density profiles of a simple model fluid in contact with a planar surface using density functional theory (DFT), in particular for the case where there is a vapour layer intruding between the wall and the bulk liquid. We apply the method of Hughes et al. [J. Chem. Phys. 142, 074702 (2015)] to calculate the density profiles for varying (specified) amounts of the vapour adsorbed at the wall. This is equivalent to varying the thickness $h$ of the vapour at the surface. From the resulting sequence of density profiles we calculate the thermodynamic grand potential as $h$ is varied and thereby determine the binding potential as a function of $h$. The binding potential obtained via this coarse-graining approach allows us to determine the disjoining pressure in the film and also to predict the shape of vapour nano-bubbles on the surface. Our microscopic DFT based approach captures information from length scales much smaller than some commonly used models in continuum mechanics. △ Less

Submitted 13 April, 2019; originally announced April 2019.

Comments: 15 pages, 15 figures

Stone-Wales graphene: A Two Dimensional Carbon Semi-Metal with Magic Stability

Authors: HengChuang Yin, Xizhi Shi, Chaoyu He, Miguel Martinez-Canales, ** Li, Chris J. Pickard, Chao Tang, Tao Ouyang, Chunxiao Zhang, Jianxin Zhong

Abstract: A two-dimensional carbon allotrope, Stone-Wales graphene, is identified in stochastic group and graph constrained searches and systematically investigated by first-principles calculations. Stone-Wales graphene consists of well-arranged Stone-Wales defects, and it can be constructed through a 90$^\circ$ bond-rotation in a $\sqrt{8}$$\times$$\sqrt{8}$ super-cell of graphene. Its calculated energy re… ▽ More A two-dimensional carbon allotrope, Stone-Wales graphene, is identified in stochastic group and graph constrained searches and systematically investigated by first-principles calculations. Stone-Wales graphene consists of well-arranged Stone-Wales defects, and it can be constructed through a 90$^\circ$ bond-rotation in a $\sqrt{8}$$\times$$\sqrt{8}$ super-cell of graphene. Its calculated energy relative to graphene, +149 meV/atom, makes it more stable than the most competitive previously suggested graphene allotropes. We find that Stone-Wales graphene based on a $\sqrt{8}$ super-cell is more stable than those based on $\sqrt{9} \times \sqrt{9}$, $\sqrt{12} \times \sqrt{12}$ and $\sqrt{13} \times \sqrt{13}$ super-cells, and is a "magic size" that can be further understood through a simple "energy splitting and inversion" model. The calculated vibrational properties and molecular dynamics of SW-graphene confirm that it is dynamically stable. The electronic structure shows SW-graphene is a semimetal with distorted, strongly anisotropic Dirac cones. △ Less

Submitted 9 January, 2019; originally announced January 2019.

Comments: Accepted;5 pages;5 figures;53 references and 8 pages of supplementary file

Journal ref: Physical Review B Rapid communication 2019

Large and Persistent Photoconductivity due to Hole-Hole Correlation in CdS

Authors: Han Yin, Austin Akey, R. Jaramillo

Abstract: Large and persistent photoconductivity (LPPC) in semiconductors is due to the trap** of photo-generated minority carriers at crystal defects. Theory has suggested that anion vacancies in II-VI semiconductors are responsible for LPPC due to negative-U behavior, whereby two minority carriers become kinetically trapped by lattice relaxation following photo-excitation. By performing a detailed analy… ▽ More Large and persistent photoconductivity (LPPC) in semiconductors is due to the trap** of photo-generated minority carriers at crystal defects. Theory has suggested that anion vacancies in II-VI semiconductors are responsible for LPPC due to negative-U behavior, whereby two minority carriers become kinetically trapped by lattice relaxation following photo-excitation. By performing a detailed analysis of photoconductivity in CdS, we provide experimental support for this negative-U model of LPPC. We also show that LPPC is correlated with sulfur deficiency. We use this understanding to vary the photoconductivity of CdS films over nine orders of magnitude, and vary the LPPC characteristic decay time from seconds to 10^4 seconds, by controlling the activities of Cd^{2+} and S^{2-} ions during chemical bath deposition. We suggest a screening method to identify other materials with long-lived, non-equilibrium, photo-excited states based on the results of ground-state calculations of atomic rearrangements following defect redox reactions, with a conceptual connection to polaron formation. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Materials 2, 084602 (2018)

Magnetoelectric and Raman spectroscopic studies of single-crystalline MnCr2O4

Authors: G. T. Lin, Y. Q. Wang, X. Luo, J. Ma, H. L. Zhuang, D. Qian, L. H. Yin, F. C. Chen, J. Yan, R. R. Zhang, S. L. Zhang, W. Tong, W. H. Song, P. Tong, X. B. Zhu, Y. P. Sun

Abstract: MnCr2O4 that exhibits spin frustration and complex spiral spin order is of great interest from both fundamental as well as application-oriented perspectives. Unlike CoCr2O4 whose ground state presents the coexistence of commensurate spiral spin order (CSSO) and ferroelectric order, MnCr2O4 shows no multiferroicity. One reason is that the spiral spin order is highly sensitive to the oxygen concentr… ▽ More MnCr2O4 that exhibits spin frustration and complex spiral spin order is of great interest from both fundamental as well as application-oriented perspectives. Unlike CoCr2O4 whose ground state presents the coexistence of commensurate spiral spin order (CSSO) and ferroelectric order, MnCr2O4 shows no multiferroicity. One reason is that the spiral spin order is highly sensitive to the oxygen concentration in MnCr2O4. Here, we have successfully grown high-quality single-crystalline MnCr2O4 by the chemical vapor transport method. We observe a new first-order magnetic transition from the incommensurate spiral spin order (ICSSO) at 19.4 K to the CSSO at 17.4 K. This magnetic transition is verified by magnetization, specific heat, and magnetoelectric measurements, which also confirm that the ground state exhibits the coexistence of the CSSO and magnetoelectricity below 17.4 K. Interestingly, the temperature evolution of Raman spectra between 5.4 and 300 K suggests that the structure remains the same. We also find that the phase-transition temperature of the CSSO decreases as applied magnetic field increases up to 45 kOe. △ Less

Submitted 30 January, 2018; originally announced January 2018.

Comments: Accepted by Phys. Rev. B

Journal ref: Phys. Rev. B 97, 064405 (2018)

Zeros of Loschmidt echo in the presence of Anderson localization

Authors: Honghao Yin, Shu Chen, Gao Xianlong, Pei Wang

Abstract: We study the Loschmidt echo and the dynamical free energy of the Anderson model after a quench of the disorder strength. If the initial state is extended and the eigenstates of the post-quench Hamiltonian are strongly localized, we argue that the Loschmidt echo exhibits zeros periodically with the period $2π/D$ where $D$ is the width of spectra. At these zeros, the dynamical free energy diverges i… ▽ More We study the Loschmidt echo and the dynamical free energy of the Anderson model after a quench of the disorder strength. If the initial state is extended and the eigenstates of the post-quench Hamiltonian are strongly localized, we argue that the Loschmidt echo exhibits zeros periodically with the period $2π/D$ where $D$ is the width of spectra. At these zeros, the dynamical free energy diverges in a logarithmic way. We present numerical evidence of our argument in one- and three-dimensional Anderson models. Our findings connect the dynamical quantum phase transitions to the localization-delocalization phase transitions. △ Less

Submitted 7 November, 2017; v1 submitted 17 May, 2017; originally announced May 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. A 97, 033624 (2018)

Higher-order clustering in networks

Authors: Hao Yin, Austin R. Benson, Jure Leskovec

Abstract: A fundamental property of complex networks is the tendency for edges to cluster. The extent of the clustering is typically quantified by the clustering coefficient, which is the probability that a length-2 path is closed, i.e., induces a triangle in the network. However, higher-order cliques beyond triangles are crucial to understanding complex networks, and the clustering behavior with respect to… ▽ More A fundamental property of complex networks is the tendency for edges to cluster. The extent of the clustering is typically quantified by the clustering coefficient, which is the probability that a length-2 path is closed, i.e., induces a triangle in the network. However, higher-order cliques beyond triangles are crucial to understanding complex networks, and the clustering behavior with respect to such higher-order network structures is not well understood. Here we introduce higher-order clustering coefficients that measure the closure probability of higher-order network cliques and provide a more comprehensive view of how the edges of complex networks cluster. Our higher-order clustering coefficients are a natural generalization of the traditional clustering coefficient. We derive several properties about higher-order clustering coefficients and analyze them under common random graph models. Finally, we use higher-order clustering coefficients to gain new insights into the structure of real-world networks from several domains. △ Less

Submitted 4 January, 2018; v1 submitted 12 April, 2017; originally announced April 2017.

Journal ref: Phys. Rev. E 97, 052306 (2018)

Spin filtering in transition-metal phthalocyanine molecules from first principles

Authors: Li Niu, Huan Wang, Lina Bai, Ximing Rong, Xiaojie Liu, Hua Li, Haitao Yin

Abstract: Using first-principles calculations based on density functional theory and the nonequilibrium Green function formalism, we studied the spin transport through metal-phthalocyanine (MPc, M=Ni, Fe, Co, Mn, Cr) molecules connected to aurum nanowire electrodes. We found that the MnPc, FePc, and CrPc molecular devices exhibit a perfect spin filtering effect compared to CoPc and NiPc. Moreover, negative… ▽ More Using first-principles calculations based on density functional theory and the nonequilibrium Green function formalism, we studied the spin transport through metal-phthalocyanine (MPc, M=Ni, Fe, Co, Mn, Cr) molecules connected to aurum nanowire electrodes. We found that the MnPc, FePc, and CrPc molecular devices exhibit a perfect spin filtering effect compared to CoPc and NiPc. Moreover, negative differential resistance appears in FePc molecular devices. The transmission coefficients at different bias voltages were further presented to understand this phenomenon. These results would be useful in designing devices for future nanotechnology. △ Less

Submitted 24 February, 2017; originally announced February 2017.

Comments: 11 pages, 5 figures

Composition dependent band offsets of ZnO and its ternary alloys

Authors: Haitao Yin, Junli Chen, Yin Wang, Jian Wang, Hong Guo

Abstract: We report the calculated fundamental band gaps of \emph{wurtzite} ternary alloys Zn$_{1-x}$M$_x$O (M=Mg, Cd) and the band offsets of the ZnO/Zn$_{1-x}$M$_x$O heterojunctions, these II-VI materials are important for electronics and optoelectronics. Our calculation is based on density functional theory within the linear muffin-tin orbital (LMTO) approach where the modified Becke-Johnson (MBJ) semi-l… ▽ More We report the calculated fundamental band gaps of \emph{wurtzite} ternary alloys Zn$_{1-x}$M$_x$O (M=Mg, Cd) and the band offsets of the ZnO/Zn$_{1-x}$M$_x$O heterojunctions, these II-VI materials are important for electronics and optoelectronics. Our calculation is based on density functional theory within the linear muffin-tin orbital (LMTO) approach where the modified Becke-Johnson (MBJ) semi-local exchange is used to accurately produce the band gaps, and the coherent potential approximation (CPA) is applied to deal with configurational average for the ternary alloys. The combined LMTO-MBJ-CPA approach allows one to simultaneously determine both the conduction band and valence band offsets of the heterojunctions. The calculated band gap data of the ZnO alloys scale as $E_g=3.35+2.33x$ and $E_g=3.36-2.33x+1.77x^2$ for Zn$_{1-x}$Mg$_x$O and Zn$_{1-x}$Cd$_x$O, respectively, where $x$ being the impurity concentration. These scaling as well as the composition dependent band offsets are quantitatively compared to the available experimental data. The capability of predicting the band parameters and band alignments of ZnO and its ternary alloys with the LMTO-CPA-MBJ approach indicate the promising application of this method in the design of emerging electronics and optoelectronics. △ Less

Submitted 24 January, 2017; originally announced January 2017.

Comments: 6 pages, 5 figures

Films, layers and droplets: The effect of near-wall fluid structure on spreading dynamics

Authors: Hanyu Yin, David N. Sibley, Uwe Thiele, Andrew J. Archer

Abstract: We present a study of the spreading of liquid droplets on a solid substrate at very small scales. We focus on the regime where effective wetting energy (binding potential) and surface tension effects significantly influence steady and spreading droplets. In particular, we focus on strong packing and layering effects in the liquid near the substrate due to underlying density oscillations in the flu… ▽ More We present a study of the spreading of liquid droplets on a solid substrate at very small scales. We focus on the regime where effective wetting energy (binding potential) and surface tension effects significantly influence steady and spreading droplets. In particular, we focus on strong packing and layering effects in the liquid near the substrate due to underlying density oscillations in the fluid caused by attractive substrate-liquid interactions. We show that such phenomena can be described by a thin-film (or long-wave or lubrication) model including an oscillatory Derjaguin (or disjoining/conjoining) pressure, and explore the effects it has on steady droplet shapes and the spreading dynamics of droplets on both, an adsorption (or precursor) layer and completely dry substrates. At the molecular scale, commonly used two-term binding potentials with a single preferred minimum controlling the adsorption layer height are inadequate to capture the rich behaviour caused by the near-wall layered molecular packing. The adsorption layer is often sub-monolayer in thickness, i.e., the dynamics along the layer consists of single-particle hop**, leading to a diffusive dynamics, rather than the collective hydrodynamic motion implicit in standard thin-film models. We therefore modify the model in such a way that for thicker films the standard hydrodynamic theory is realised, but for very thin layers a diffusion equation is recovered. △ Less

Submitted 18 January, 2017; v1 submitted 1 November, 2016; originally announced November 2016.

Comments: 17 pages, 21 figures

Journal ref: Phys. Rev. E 95, 023104 (2017)

Tuning of few-electron states and optical absorption anisotropy in GaAs quantum rings

Authors: Zhenhua Wu, Jian Li, J. Li, H. Yin, Yu Liu

Abstract: The electronic and optical properties of a GaAs quantum ring (QR) with few electrons in the presence of the Rashba spin-orbit interaction (RSOI) and the Dresselhaus spin-orbit interaction (DSOI) have been investigated theoretically. Configuration interaction (CI) method is employed to calculate the eigenvalues and eigenstates of the multiple-electron QR accurately. Our numerical results demonstrat… ▽ More The electronic and optical properties of a GaAs quantum ring (QR) with few electrons in the presence of the Rashba spin-orbit interaction (RSOI) and the Dresselhaus spin-orbit interaction (DSOI) have been investigated theoretically. Configuration interaction (CI) method is employed to calculate the eigenvalues and eigenstates of the multiple-electron QR accurately. Our numerical results demonstrate that the symmetry breaking induced by the RSOI and DSOI leads to an anisotropic distribution of multi-electron states. The Coulomb interaction offers additional modulation of the electron distribution and thus the optical absorption indices in the quantum rings. By tuning the magnetic/electric fields and/or electron numbers in a quantum ring, one can change its optical property significantly. Our theory provides a new way to control multi-electron states and optical properties of QR by hybrid modulations or by electrical means only. △ Less

Submitted 12 October, 2017; v1 submitted 25 August, 2016; originally announced August 2016.

Comments: 7 pages, 6 figures

Magnetic evolution of Spinel Mn1-xZnxCr2O4 single crystals

Authors: G. T. Lin, X. Luo, Q. L. Pei, F. C. Chen, C. Yang, J. Y. Song, L. H. Yin, W. H. Song, Y. P. Sun

Abstract: Mn1-xZnxCr2O4 (0<x<1) single crystals have been grown by the chemical vapor transport (CVT) method. The crystallographic, magnetic, and thermal transport properties of the single crystals were investigated by the room-temperature X-ray diffraction, magnetization M(T) and specific heat CP(T) measurements. Mn1-xZnxCr2O4 crystals show a cubic structure, the lattice constant a decreases with the incre… ▽ More Mn1-xZnxCr2O4 (0<x<1) single crystals have been grown by the chemical vapor transport (CVT) method. The crystallographic, magnetic, and thermal transport properties of the single crystals were investigated by the room-temperature X-ray diffraction, magnetization M(T) and specific heat CP(T) measurements. Mn1-xZnxCr2O4 crystals show a cubic structure, the lattice constant a decreases with the increasing content x of the doped Zn2+ ions and follows the Vegard law. Based on the magnetization and heat capacity measurements, the magnetic evolution of Mn1-xZnxCr2O4 crystals has been discussed. For 0<x<0.3, the magnetic ground state is the coexistence of the collinear ferrimagnetic order (CFIM) and spiral ferrimagnetic one (SFIM), which is similar to that of the parent MnCr2O4. When x changes from 0.3 to 0.8, the SFIM is progressively suppressed and spin glass-like behavior is observed. When x is above 0.8, an antiferromagnetic (AFM) order presents. At the same time, the magnetic specific heat (Cmag.) was also investigated and the results are coincident with the magnetic measurements. The possible reasons based on the disorder effect and the reduced molecular field effect induced by the substitution of Mn2+ ions by nonmagnetic Zn2+ ones in Mn1-xZnxCr2O4 crystals have been discussed. △ Less

Submitted 25 February, 2016; originally announced February 2016.

Electronic structures of III-V zinc-blende semiconductors from atomistic first principles

Authors: Yin Wang, Haitao Yin, Ronggen Cao, Ferdows Zahid, Yu Zhu, Lei Liu, Jian Wang, Hong Guo

Abstract: For analyzing quantum transport in semiconductor devices, accurate electronic structures are critical for quantitative predictions. Here we report theoretical analysis of electronic structures of all III-V zinc-blende semiconductor compounds. Our calculations are from density functional theory with the semi-local exchange proposed recently [F. Tran and P. Blaha, Phys. Rev. Lett. 102, 226401 (2009)… ▽ More For analyzing quantum transport in semiconductor devices, accurate electronic structures are critical for quantitative predictions. Here we report theoretical analysis of electronic structures of all III-V zinc-blende semiconductor compounds. Our calculations are from density functional theory with the semi-local exchange proposed recently [F. Tran and P. Blaha, Phys. Rev. Lett. 102, 226401 (2009)], within the linear muffin tin orbital scheme. The calculated band gaps and effective masses are compared to experimental data and good quantitative agreement is obtained. Using the theoretical scheme presented here, quantum transport in nanostructures of III-V compounds can be confidently predicted. △ Less

Submitted 29 March, 2013; originally announced March 2013.

Comments: 4 pages, 2 figures

Annealing induced colossal magnetocapacitance and colossal magnetoresistance in In-doped CdCr2S4

Authors: Y. M. Xie, Z. R. Yang, L. Li, L. H. Yin, X. B. Hu, Y. L. Huang, H. B. Jian, W. H. Song, Y. P. Sun, S. Q. Zhou, Y. H. Zhang

Abstract: The correlation between colossal magnetocapacitance (CMC) and colossal magnetoresistance (CMR) in CdCr2S4 system has been revealed. The CMC is induced in polycrystalline Cd0.97In0.03Cr2S4 by annealing in cadmium vapor. At the same time, an insulator-metal transition and a concomitant CMR are observed near the Curie temperature. In contrast, after the same annealing treatment, CdCr2S4 displays a ty… ▽ More The correlation between colossal magnetocapacitance (CMC) and colossal magnetoresistance (CMR) in CdCr2S4 system has been revealed. The CMC is induced in polycrystalline Cd0.97In0.03Cr2S4 by annealing in cadmium vapor. At the same time, an insulator-metal transition and a concomitant CMR are observed near the Curie temperature. In contrast, after the same annealing treatment, CdCr2S4 displays a typical semiconductor behavior and does not show magnetic field dependent dielectric and electric transport properties. The simultaneous occurrence or absence of CMC and CMR effects implies that the CMC in the annealed Cd0.97In0.03Cr2S4 could be explained qualitatively by a combination of CMR and Maxwell-Wagner effect. △ Less

Submitted 29 December, 2012; originally announced December 2012.

Comments: 14 pages, 3 figures

Journal ref: J. Appl. Phys. 112, 123912 (2012)

Coherent transport of armchair graphene constrictions

Authors: HuiQiong Yin, Wei Li, Xiao Hu, Ruibao Tao

Abstract: The coherent transport properties of armchair graphene nanoconstrictions(GNC) are studied using tight-binding approach and Green's function method. We find a non-bonding state at zero Fermi energy which results in a zero conductance valley, when a single vacancy locates at $y=3n\pm 1$ of a perfect metallic armchair graphene nanoribbon(aGNR). However, the non-bonding state doesn't exist when a va… ▽ More The coherent transport properties of armchair graphene nanoconstrictions(GNC) are studied using tight-binding approach and Green's function method. We find a non-bonding state at zero Fermi energy which results in a zero conductance valley, when a single vacancy locates at $y=3n\pm 1$ of a perfect metallic armchair graphene nanoribbon(aGNR). However, the non-bonding state doesn't exist when a vacancy locates at y=3n, and the conductance behavior of lowest conducting channel will not be affected by the vacancy. For the square-shaped armchair GNC consisting of three metallic aGNR segments, resonant tunneling behavior is observed in the single channel energy region. We find that the presence of localized edge state locating at the zigzag boundary can affect the resonant tunneling severely. A simplified one dimensional model is put forward at last, which explains the resonant tunneling behavior of armchair GNC very well. △ Less

Submitted 21 December, 2009; originally announced December 2009.

Comments: 6 pages, 11 figures

Improved transfer matrix method without numerical instability

Authors: Huiqiong Yin, Ruibao Tao

Abstract: A new improved transfer matrix method (TMM) is presented. It is shown that the method not only overcomes the numerical instability found in the original TMM, but also greatly improves the scalability of computation. The new improved TMM has no extra cost of computing time as the length of homogeneous scattering region becomes large. The comparison between the scattering matrix method(SMM) and ou… ▽ More A new improved transfer matrix method (TMM) is presented. It is shown that the method not only overcomes the numerical instability found in the original TMM, but also greatly improves the scalability of computation. The new improved TMM has no extra cost of computing time as the length of homogeneous scattering region becomes large. The comparison between the scattering matrix method(SMM) and our new TMM is given. It clearly shows that our new method is much faster than SMM. △ Less

Submitted 28 December, 2008; v1 submitted 24 September, 2007; originally announced September 2007.

Comments: 5 pages,3 figures

Journal ref: EPL,84(2008) 57006

Carbon-doped ZnO: A New Class of Room Temperature Dilute Magnetic Semiconductor

Authors: H. Pan, J. B. Yi, J. Y. Lin, Y. P. Feng, J. Ding, L. H. Van, J. H. Yin

Abstract: We report magnetism in carbon doped ZnO. Our first-principles calculations based on density functional theory predicted that carbon substitution for oxygen in ZnO results in a magnetic moment of 1.78 $μ_B$ per carbon. The theoretical prediction was confirmed experimentally. C-doped ZnO films deposited by pulsed laser deposition with various carbon concentrations showed ferromagnetism with Curie… ▽ More We report magnetism in carbon doped ZnO. Our first-principles calculations based on density functional theory predicted that carbon substitution for oxygen in ZnO results in a magnetic moment of 1.78 $μ_B$ per carbon. The theoretical prediction was confirmed experimentally. C-doped ZnO films deposited by pulsed laser deposition with various carbon concentrations showed ferromagnetism with Curie temperatures higher than 400 K, and the measured magnetic moment based on the content of carbide in the films ($1.5 - 3.0 μ_B$ per carbon) is in agreement with the theoretical prediction. The magnetism is due to bonding coupling between Zn ions and doped C atoms. Results of magneto-resistance and abnormal Hall effect show that the doped films are $n$-type semiconductors with intrinsic ferromagnetism. The carbon doped ZnO could be a promising room temperature dilute magnetic semiconductor (DMS) and our work demonstrates possiblity of produing DMS with non-metal do**. △ Less

Submitted 31 October, 2006; originally announced October 2006.

Comments: REVtex source with 4 figures in eps format

Slow dynamics and aging in a non-randomly frustrated spin system

Authors: Hui Yin, Bulbul Chakraborty

Abstract: A simple, non-disordered spin model has been studied in an effort to understand the origin of the precipitous slowing down of dynamics observed in supercooled liquids approaching the glass transition. A combination of Monte Carlo simulations and exact calculations indicates that this model exhibits an entropy vanishing transition accompanied by a rapid divergence of time scales. Measurements of… ▽ More A simple, non-disordered spin model has been studied in an effort to understand the origin of the precipitous slowing down of dynamics observed in supercooled liquids approaching the glass transition. A combination of Monte Carlo simulations and exact calculations indicates that this model exhibits an entropy vanishing transition accompanied by a rapid divergence of time scales. Measurements of various correlation functions show that the system displays a hierarchy of time scales associated with different degrees of freedom. Extended structures, arising from the frustration in the system, are identified as the source of the slow dynamics. In the simulations, the system falls out of equilibrium at a temperature $T_{g}$ higher than the entropy-vanishing transition temperature and the dynamics below $T_{g}$ exhibits aging as distinct from coarsening. The cooling rate dependence of the energy is also consistent with the usual glass formation scenario. △ Less

Submitted 23 July, 2001; v1 submitted 14 July, 2001; originally announced July 2001.

Comments: 41 pages, 16 figures. Bibliography file is corrected

Entropy-vanishing transition and glassy dynamics in frustrated spins

Authors: Hui Yin, Bulbul Chakraborty

Abstract: In an effort to understand the glass transition, the dynamics of a non-randomly frustrated spin model has been analyzed. The phenomenology of the spin model is similar to that of a supercooled liquid undergoing the glass transition. The slow dynamics can be associated with the presence of extended string-like structures which demarcate regions of fast spin flips. An entropy-vanishing transition,… ▽ More In an effort to understand the glass transition, the dynamics of a non-randomly frustrated spin model has been analyzed. The phenomenology of the spin model is similar to that of a supercooled liquid undergoing the glass transition. The slow dynamics can be associated with the presence of extended string-like structures which demarcate regions of fast spin flips. An entropy-vanishing transition, with the string density as the order parameter, is related to the observed glass transition in the spin model. △ Less

Submitted 12 January, 2001; v1 submitted 27 April, 2000; originally announced April 2000.

Comments: 4 pages,5 figures, accepted in PRL January 2001

Glassy Dynamics in a Frustrated Spin System: Role of Defects

Authors: Bulbul Chakraborty, Lei Gu, Hui Yin

Abstract: In an effort to understand the glass transition, the kinetics of a spin model with frustration but no quenched randomness has been analyzed. The phenomenology of the spin model is remarkably similiar to that of structural glasses. Analysis of the model suggests that defects play a major role in dictating the dynamics as the glass transition is approached. In an effort to understand the glass transition, the kinetics of a spin model with frustration but no quenched randomness has been analyzed. The phenomenology of the spin model is remarkably similiar to that of structural glasses. Analysis of the model suggests that defects play a major role in dictating the dynamics as the glass transition is approached. △ Less

Submitted 17 March, 2000; originally announced March 2000.

Comments: 9 pages, 5 figures, accepted in J. Phys.: Condensed Matter, proceedings of the Trieste workshop on "Unifying Concepts in Glass Physics"

Effective Field Theory of the Zero-Temperature Triangular-Lattice Antiferromagnet: A Monte Carlo Study

Authors: Hui Yin, Bulbul Chakraborty, Nicholas Gross

Abstract: Using a Monte Carlo coarse-graining technique introduced by Binder et al., we have explicitly constructed the continuum field theory for the zero-temperature triangular Ising antiferromagnet. We verify the conjecture that this is a gaussian theory of the height variable in the interface representation of the spin model. We also measure the height-height correlation function and deduce the stiffn… ▽ More Using a Monte Carlo coarse-graining technique introduced by Binder et al., we have explicitly constructed the continuum field theory for the zero-temperature triangular Ising antiferromagnet. We verify the conjecture that this is a gaussian theory of the height variable in the interface representation of the spin model. We also measure the height-height correlation function and deduce the stiffness constant. In addition, we investigate the nature of defect-defect interactions at finite temperatures, and find that the two-dimensional Coulomb gas scenario applies at low temperatures. △ Less

Submitted 4 January, 2000; v1 submitted 9 November, 1999; originally announced November 1999.

Comments: 26 pages, 9 figures