-
The role of microstructure in the thermal fatigue of solder joints
Authors:
J. W. Xian,
Y. L. Xu,
S. Stoyanov,
R. J. Coyle,
F. P. E. Dunne,
C. M. Gourlay
Abstract:
Thermal fatigue is a common failure mode in electronic solder joints, yet the role of microstructure is incompletely understood. Here, we quantify the evolution of microstructure and damage in Sn-3Ag-0.5Cu joints throughout a ball grid array (BGA) package using EBSD map** of localised subgrains, recrystallisation and heavily coarsened Ag3Sn. We then interpret the results with a multi-scale model…
▽ More
Thermal fatigue is a common failure mode in electronic solder joints, yet the role of microstructure is incompletely understood. Here, we quantify the evolution of microstructure and damage in Sn-3Ag-0.5Cu joints throughout a ball grid array (BGA) package using EBSD map** of localised subgrains, recrystallisation and heavily coarsened Ag3Sn. We then interpret the results with a multi-scale modelling approach that links from a continuum model at the package/board scale through to a crystal plasticity finite element model at the microstructure scale. We measure and explain the dependence of damage evolution on (i) the beta-Sn crystal orientation(s) in single and multigrain joints, and (ii) the coefficient of thermal expansion (CTE) mismatch between tin grains in cyclic twinned multigrain joints. We further explore the relative importance of the solder microstructure versus the joint location in the array. The results provide a basis for designing optimum solder joint microstructures for thermal fatigue resistance.
△ Less
Submitted 29 May, 2024; v1 submitted 7 November, 2023;
originally announced November 2023.
-
Multi-scale plasticity homogenization of Sn-3Ag-0.5Cu: from β-Sn micropillars to polycrystals with intermetallics
Authors:
Yilun Xu,
Tianhong Gu,
**gwei Xian,
Finn Giuliani,
T. Ben Britton,
Christopher M. Gourlay,
Fionn P. E. Dunne
Abstract:
The mechanical properties of $β$-Sn single crystals have been systematically investigated using a combined methodology of micropillar tests and rate-dependent crystal plasticity modelling. The slip strength and rate sensitivity of several key slip systems within $β$-Sn single crystals have been determined. Consistency between the numerically predicted and experimentally observed slip traces has be…
▽ More
The mechanical properties of $β$-Sn single crystals have been systematically investigated using a combined methodology of micropillar tests and rate-dependent crystal plasticity modelling. The slip strength and rate sensitivity of several key slip systems within $β$-Sn single crystals have been determined. Consistency between the numerically predicted and experimentally observed slip traces has been shown for pillars oriented to activate single and double slip. Subsequently, the temperature-dependent, intermetallic-size-governing behaviour of a polycrystal $β$-Sn-rich alloy SAC305 (96.5Sn-3Ag-0.5Cu wt%) is predicted through a multi-scale homogenization approach, and the predicted temperature- and rate-sensitivity reproduce independent experimental results. The integrated experimental and numerical approaches provide mechanistic understanding and fundamental material properties of microstructure-sensitive behaviour of electronic solders subject to thermomechanical loading, including thermal fatigue.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
A multi-scale approach to microstructure-sensitive thermal fatigue in solder joints
Authors:
Yilun Xu,
**gwei Xian,
Stoyan Stoyanov,
Chris Bailey,
Richard J. Coyle,
Christopher M. Gourlay,
Fionn P. E. Dunne
Abstract:
This paper presents a multi-scale modelling approach to investigate the underpinning mechanisms of microstructure-sensitive damage of single crystal Sn-3Ag-0.5Cu (wt%, SAC305) solder joints of a Ball Grid Array (BGA) board assembly subject to thermal cycling. The multi-scale scheme couples board-scale modelling at the continuum macro-scale and individual solder modelling at the crystal micro-scale…
▽ More
This paper presents a multi-scale modelling approach to investigate the underpinning mechanisms of microstructure-sensitive damage of single crystal Sn-3Ag-0.5Cu (wt%, SAC305) solder joints of a Ball Grid Array (BGA) board assembly subject to thermal cycling. The multi-scale scheme couples board-scale modelling at the continuum macro-scale and individual solder modelling at the crystal micro-scale. Systematic studies of tin crystal orientation and its role in fatigue damage have been compared to experimental observations. Crystallographic orientation is examined with respect to damage development, providing evidence-based optimal solder microstructural design for in-service thermomechanical fatigue.
△ Less
Submitted 13 April, 2022; v1 submitted 12 April, 2022;
originally announced April 2022.
-
Melting curve of magnesium up to 460 GPa from ab initio molecular dynamics simulations
Authors:
Chengfeng Cui,
Jiawei Xian,
Haifeng Liu,
Fuyang Tian,
Xingyu Gao,
Haifeng Song
Abstract:
Based on ab initio molecular dynamics simulations, we determined the melting curve of magnesium (Mg) up to ~460 GPa using the solid-liquid coexistence method. Between ~30 and 100 GPa, our melting curve is noticeably lower than those from static experiments, but is in good agreement with recent shock experiments. Up to ~450 GPa, our melting curve is generally consistent with the melting points from…
▽ More
Based on ab initio molecular dynamics simulations, we determined the melting curve of magnesium (Mg) up to ~460 GPa using the solid-liquid coexistence method. Between ~30 and 100 GPa, our melting curve is noticeably lower than those from static experiments, but is in good agreement with recent shock experiments. Up to ~450 GPa, our melting curve is generally consistent with the melting points from first-principles calculations using the small-cell coexistence method. We found that, at high pressures of a few hundred GPa, due to the strong softening of interatomic interactions in the liquid phase, solid-liquid coexistence simulations of Mg show some characteristics distinctively different from other metal systems, such as aluminum. For example, at a given volume, the pressure and temperature range for maintaining a stable solid-liquid coexistence state can be very small. The strong softening in the liquid phase also causes the unusual behavior of reentrant melting to occur at very high pressures. The onset of reentrant melting is predicted at ~305 GPa, close to that at ~300 GPa from the small-cell coexistence method. We show that the calculated melting points, considering reentrant melting, can be excellently fitted to a low-order Kechin equation, thereby making it possible for us to obtain a first-principles melting curve of Mg at pressures above 50 GPa for the first time. Similar characteristics in solid-liquid coexistence simulations, as well as reentrant melting, are also expected for other systems with strong softening in the liquid phase at high pressures.
△ Less
Submitted 21 May, 2022; v1 submitted 11 February, 2022;
originally announced February 2022.
-
Manipulating Hubbard-type Coulomb blockade effect of metallic wires embedded in an insulator
Authors:
Xing Yang,
Huimin Wang,
**g-**g Xian,
Sheng Meng,
Naoto Nagaosa,
Wen-Hao Zhang,
Hai-Wen Liu,
Zi-Heng Ling,
Kai Fan,
Zhi-Mo Zhang,
Le Qin,
Zhi-Hao Zhang,
Yan Liang,
Ying-Shuang Fu
Abstract:
Correlated states emerge in low-dimensional systems owing to enhanced Coulomb interactions. Elucidating these states requires atomic scale characterization and delicate control capabilities. In this study, spectroscopic imaging-scanning tunneling microscopy was employed to investigate the correlated states residing in the one-dimensional electrons of the monolayer and bilayer MoSe2 mirror twin bou…
▽ More
Correlated states emerge in low-dimensional systems owing to enhanced Coulomb interactions. Elucidating these states requires atomic scale characterization and delicate control capabilities. In this study, spectroscopic imaging-scanning tunneling microscopy was employed to investigate the correlated states residing in the one-dimensional electrons of the monolayer and bilayer MoSe2 mirror twin boundary (MTB). The Coulomb energies, determined by the wire length, drive the MTB into two types of ground states with distinct respective out-of-phase and in-phase charge orders. The two ground states can be reversibly converted through a metastable zero-energy state with in situ voltage pulses, which tunes the electron filling of the MTB via a polaronic process, as substantiated by first-principles calculations. Our modified Hubbard model reveals the ground states as correlated insulators from an on-site U-originated Coulomb interaction, dubbed Hubbard-type Coulomb blockade effect. Our work sets a foundation for understanding correlated physics in complex systems and for tailoring quantum states for nano-electronics applications.
△ Less
Submitted 17 April, 2021;
originally announced April 2021.
-
Spin map** of intralayer antiferromagnetism and spin-flop transition in monolayer CrTe$_2$
Authors:
**g-**g Xian,
Cong Wang,
Rui Li,
Mengjiao Han,
Junhao Lin,
Wen-Hao Zhang,
Zhen-Yu Liu,
Zhi-Mo Zhang,
**-Hua Nie,
Wei Ji,
Ying-Shuang Fu
Abstract:
Intrinsic antiferromagnetism in van der Waals (vdW) monolayer (ML) crystals enriches the understanding regarding two-dimensional (2D) magnetic orders and holds special virtues over ferromagnetism in spintronic applications. However, the studies on intrinsic antiferromagnetism are sparse, owing to the lack of net magnetisation. In this study, by combining spin-polarised scanning tunnelling microsco…
▽ More
Intrinsic antiferromagnetism in van der Waals (vdW) monolayer (ML) crystals enriches the understanding regarding two-dimensional (2D) magnetic orders and holds special virtues over ferromagnetism in spintronic applications. However, the studies on intrinsic antiferromagnetism are sparse, owing to the lack of net magnetisation. In this study, by combining spin-polarised scanning tunnelling microscopy and first-principles calculations, we investigate the magnetism of vdW ML CrTe2, which has been successfully grown through molecular beam epitaxy. Surprisingly, we observe a stable antiferromagnetic (AFM) order at the atomic scale in the ML crystal, whose bulk is a strong ferromagnet, and correlate its imaged zigzag spin texture with the atomic lattice structure. The AFM order exhibits an intriguing noncollinear spin-flop transition under magnetic fields, consistent with its calculated moderate magnetic anisotropy. The findings of this study demonstrate the intricacy of 2D vdW magnetic materials and pave the way for their in-depth studies.
△ Less
Submitted 7 December, 2021; v1 submitted 11 November, 2020;
originally announced November 2020.
-
Possible phason-polaron effect on purely one dimensional charge order of Mo6Se6 nanowires
Authors:
Xing Yang,
**g-**g Xian,
Gang Li,
Naoto Nagaosa,
Wen-Hao Zhang,
Le Qin,
Zhi-Mo Zhang,
**g-Tao Lü,
Ying-Shuang Fu
Abstract:
In one-dimensional (1D) metallic systems, the diverging electron susceptibility and electron-phonon coupling collaboratively drive the electrons into a charge density wave (CDW) state. However, strictly 1D system is unstable against perturbations, whose effect on CDW order requires clarification ideally with altered coupling to surroundings. Here, we fabricate such a system with nanowires of Mo6Se…
▽ More
In one-dimensional (1D) metallic systems, the diverging electron susceptibility and electron-phonon coupling collaboratively drive the electrons into a charge density wave (CDW) state. However, strictly 1D system is unstable against perturbations, whose effect on CDW order requires clarification ideally with altered coupling to surroundings. Here, we fabricate such a system with nanowires of Mo6Se6 bundles, which are either attached to edges of monolayer MoSe2 or isolated freely, by post-annealing the preformed MoSe2. Using scanning tunneling microscopy (STM), we visualized charge modulations and CDW gaps with prominent coherent peaks in the edge-attached nanowires. Astonishingly, the CDW order becomes suppressed in the isolated nanowires, showing CDW correlation gaps without coherent peaks. The contrasting behavior, as revealed with theoretical modeling, is interpreted as the effect of phason-polarons on the 1D CDW state. Our work elucidates a possibly unprecedented many body effect that may be generic to strictly 1D system but undermined in quasi-1D system.
△ Less
Submitted 28 February, 2020;
originally announced February 2020.
-
Visualizing topological edge states of single and double bilayer Bi supported on multibilayer Bi(111) films
Authors:
Lang Peng,
**g-**g Xian,
Peizhe Tang,
Angel Rubio,
Shou-Cheng Zhang,
Wenhao Zhang,
Ying-Shuang Fu
Abstract:
Freestanding single-bilayer Bi(111) is a two-dimensional topological insulator with edge states propagating along its perimeter. Given the interlayer coupling experimentally, the topological nature of Bi(111) thin films and the impact of the supporting substrate on the topmost Bi bilayer are still under debate. Here, combined with scanning tunneling microscopy and first-principles calculations, we…
▽ More
Freestanding single-bilayer Bi(111) is a two-dimensional topological insulator with edge states propagating along its perimeter. Given the interlayer coupling experimentally, the topological nature of Bi(111) thin films and the impact of the supporting substrate on the topmost Bi bilayer are still under debate. Here, combined with scanning tunneling microscopy and first-principles calculations, we systematically study the electronic properties of Bi(111) thin films grown on a NbSe2 substrate. Two types of non-magnetic edge structures, i.e., a conventional zigzag edge and a 2x1 reconstructed edge, coexist alternately at the boundaries of single bilayer islands, the topological edge states of which exhibit remarkably different energy and spatial distributions. Prominent edge states are persistently visualized at the edges of both single and double bilayer Bi islands, regardless of the underlying thickness of Bi(111) thin films. We provide an explanation for the topological origin of the observed edge states that is verified with first-principles calculations. Our paper clarifies the long-standing controversy regarding the topology of Bi(111) thin films and reveals the tunability of topological edge states via edge modifications.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Two-phase Thermodynamic Model for Computing Entropies of Liquids Reanalyzed
Authors:
Tao Sun,
Jiawei Xian,
Huai Zhang,
Zhigang Zhang,
Yigang Zhang
Abstract:
The two-phase thermodynamic (2PT) model {[}J. Chem. Phys., \textbf{119}, 11792 (2003){]} provides a promising paradigm to efficiently determine the ionic entropies of liquids from molecular dynamics (MD). In this model, the vibrational density of states (VDoS) of a liquid is decomposed into a diffusive gas-like component and a vibrational solid-like component. By treating the diffusive component a…
▽ More
The two-phase thermodynamic (2PT) model {[}J. Chem. Phys., \textbf{119}, 11792 (2003){]} provides a promising paradigm to efficiently determine the ionic entropies of liquids from molecular dynamics (MD). In this model, the vibrational density of states (VDoS) of a liquid is decomposed into a diffusive gas-like component and a vibrational solid-like component. By treating the diffusive component as hard sphere (HS) gas and the vibrational component as harmonic oscillators, the ionic entropy of the liquid is determined. Here we examine three issues crucial for practical implementations of the 2PT model: (i) the mismatch between the VDoS of the liquid system and that of the HS gas; (ii) the excess entropy of the HS gas; (iii) the partition of the gas-like and solid-like components. Some of these issues have not been addressed before, yet they profoundly change the entropy predicted from the model. Based on these findings, a revised 2PT formalism is proposed and successfully tested in systems with Lennard-Jones potentials as well as many-atom potentials of liquid metals. Aside from being capable of performing quick entropy estimations for a wide range of systems, the formalism also supports fine-tuning to accurately determine entropies at specific thermal states.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
Observation of topological states residing at step edges of WTe2
Authors:
Lang Peng,
Yuan Yuan,
Gang Li,
Xing Yang,
**g-**g Xian,
Chang-Jiang Yi,
You-Guo Shi,
Ying-Shuang Fu
Abstract:
Topological states emerge at the boundary of solids as a consequence of the nontrivial topology of the bulk. Recently, theory predicts a topological edge state on single layer transition metal dichalcogenides with 1T' structure. However, its existence still lacks experimental proof. Here, we report the direct observations of the topological states at the step edge of WTe2 by spectroscopic-imaging…
▽ More
Topological states emerge at the boundary of solids as a consequence of the nontrivial topology of the bulk. Recently, theory predicts a topological edge state on single layer transition metal dichalcogenides with 1T' structure. However, its existence still lacks experimental proof. Here, we report the direct observations of the topological states at the step edge of WTe2 by spectroscopic-imaging scanning tunneling microscopy. A one-dimensional electronic state residing at the step edge of WTe2 is observed, which has a spatial extension of about 2.5 nm. First principles calculations rigorously verify the edge state has a topological origin, and its topological nature is unaffected by the presence of the substrate. Our study supports the existence of topological edge states in 1T'-WTe2, which may envision in-depth study of its topological physics and device applications.
△ Less
Submitted 16 March, 2017;
originally announced March 2017.