-
Optical and acoustic plasmons in the layered material Sr$_2$RuO$_4$
Authors:
J. Schultz,
A. Lubk,
F. Jerzembeck,
N. Kikugawa,
M. Knupfer,
D. Wolf,
B. Büchner,
J. Fink
Abstract:
We use momentum-dependent electron energy-loss spectroscopy in transmission to study collective charge excitations in the layer metal Sr$_2$RuO$_4$. This metal has a transition from a perfect Fermi liquid below $T\approx30\,$K into a "strange" metal phase above $T\approx800\,$K. We cover a complete range between in-phase and out-of-phase oscillations. Outside the classical range of electron-hole e…
▽ More
We use momentum-dependent electron energy-loss spectroscopy in transmission to study collective charge excitations in the layer metal Sr$_2$RuO$_4$. This metal has a transition from a perfect Fermi liquid below $T\approx30\,$K into a "strange" metal phase above $T\approx800\,$K. We cover a complete range between in-phase and out-of-phase oscillations. Outside the classical range of electron-hole excitations, leading to a Landau dam**, we observe well-defined plasmons. The optical (acoustic) plasmon due to an in-phase (out-of-phase) charge oscillation of neighbouring layers exhibits a quadratic (linear) positive dispersion. Using a model for the Coulomb interaction of the charges in a layered system, it is possible to describe the range of optical plasmon excitations at high energies in a mean-field random phase approximation without taking correlation effects into account. In contrast, RIXS data show at low energies an enhancement of the acoustic plasmon velocity due to correlation effects. This difference can be explained by an energy dependent effective mass which changes from $\approx$ 4 at low energy to 1 at high energy near the optical plasmon energy. There are no signs of over-damped plasmons predicted by holographic theories.
△ Less
Submitted 5 July, 2024; v1 submitted 11 January, 2024;
originally announced January 2024.
-
arXiv:2401.04793
[pdf]
cond-mat.mtrl-sci
cond-mat.mes-hall
cond-mat.str-el
cond-mat.supr-con
quant-ph
2024 Roadmap on Magnetic Microscopy Techniques and Their Applications in Materials Science
Authors:
D. V. Christensen,
U. Staub,
T. R. Devidas,
B. Kalisky,
K. C. Nowack,
J. L. Webb,
U. L. Andersen,
A. Huck,
D. A. Broadway,
K. Wagner,
P. Maletinsky,
T. van der Sar,
C. R. Du,
A. Yacoby,
D. Collomb,
S. Bending,
A. Oral,
H. J. Hug,
A. -O. Mandru,
V. Neu,
H. W. Schumacher,
S. Sievers,
H. Saito,
A. A. Khajetoorians,
N. Hauptmann
, et al. (28 additional authors not shown)
Abstract:
Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetization patterns, current distributions and magnetic fields at nano- and microscale is of…
▽ More
Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetization patterns, current distributions and magnetic fields at nano- and microscale is of major importance to understand the material responses and qualify them for specific applications. In this roadmap, we aim to cover a broad portfolio of techniques to perform nano- and microscale magnetic imaging using SQUIDs, spin center and Hall effect magnetometries, scanning probe microscopies, x-ray- and electron-based methods as well as magnetooptics and nanoMRI. The roadmap is aimed as a single access point of information for experts in the field as well as the young generation of students outlining prospects of the development of magnetic imaging technologies for the upcoming decade with a focus on physics, materials science, and chemistry of planar, 3D and geometrically curved objects of different material classes including 2D materials, complex oxides, semi-metals, multiferroics, skyrmions, antiferromagnets, frustrated magnets, magnetic molecules/nanoparticles, ionic conductors, superconductors, spintronic and spinorbitronic materials.
△ Less
Submitted 9 January, 2024;
originally announced January 2024.
-
Transport of Intensity Phase Retrieval in the Presence of Intensity Variations and Unknown Boundary Conditions
Authors:
A. Lubk,
R. Kyrychenko,
D. Wolf,
M. Wegner,
M. Herzog,
M. Winter,
O. Zaiets,
P. Vir,
J. Schultz,
C. Felser,
B. Büchner
Abstract:
The so-called Transport of Intensity Equation (TIE) phase retrieval technique is widely applied in light, x-ray and electron optics to reconstruct, e.g., refractive indices, electric and magnetic fields in solids. Here, we present a largely improved TIE reconstruction algorithm, which properly considers intensity variations as well as unknown boundary conditions in a finite difference implementati…
▽ More
The so-called Transport of Intensity Equation (TIE) phase retrieval technique is widely applied in light, x-ray and electron optics to reconstruct, e.g., refractive indices, electric and magnetic fields in solids. Here, we present a largely improved TIE reconstruction algorithm, which properly considers intensity variations as well as unknown boundary conditions in a finite difference implementation of the Transport of Intensity partial differential equation. That largely removes reconstruction artifacts encountered in state-of-the-art Poisson solvers of the TIE, and hence significantly increases the applicability of the technique.
△ Less
Submitted 17 January, 2024; v1 submitted 8 January, 2024;
originally announced January 2024.
-
Fractal packing of nanomaterials
Authors:
Dietrich E. Wolf,
Thorsten Pöschel
Abstract:
Cohesive particles form agglomerates that are usually very porous. Their geometry, particularly their fractal dimension, depends on the agglomeration process (diffusion-limited or ballistic growth by adding single particles or cluster-cluster aggregation). However, in practice, the packing structure depends not only on the initial formation but also on the mechanical processing of the agglomerate…
▽ More
Cohesive particles form agglomerates that are usually very porous. Their geometry, particularly their fractal dimension, depends on the agglomeration process (diffusion-limited or ballistic growth by adding single particles or cluster-cluster aggregation). However, in practice, the packing structure depends not only on the initial formation but also on the mechanical processing of the agglomerate after it has grown. Surprisingly, the packing converges to a statistically invariant structure under certain process conditions, independent of the initial growth process. We consider the repeated fragmentation on a given length scale, followed by ballistic agglomeration. Examples of fragmentation are sieving with a given mesh size or dispersion in a turbulent fluid. We model the agglomeration by gravitational sedimentation. The asymptotic structure is fractal up to the fragmentation length scale, and the fragments have a power-law size distribution. A scaling relation connects the power law and the fractal dimension.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
2D high temperature superconductor integration in contact printed circuit boards
Authors:
Christian N. Saggau,
Sanaz Shokri,
Mickey Martini,
Tommaso Confalone,
Ye** Lee,
Daniel Wolf,
Genda Gu,
Valentina Brosco,
Domenico Montemurro,
Valerii M. Vinokur,
Kornelius Nielsch,
Nicola Poccia
Abstract:
Inherent properties of superconducting Bi2Sr2CaCu2O8+x films, such as the high superconducting transition temperature Tc, efficient Josephson coupling between neighboring CuO layers, and fast quasiparticle relaxation dynamics, make them a promising platform for advances in quantum computing and communication technologies. However, preserving two-dimensional superconductivity during device fabricat…
▽ More
Inherent properties of superconducting Bi2Sr2CaCu2O8+x films, such as the high superconducting transition temperature Tc, efficient Josephson coupling between neighboring CuO layers, and fast quasiparticle relaxation dynamics, make them a promising platform for advances in quantum computing and communication technologies. However, preserving two-dimensional superconductivity during device fabrication is an outstanding experimental challenge because of the fast degradation of the superconducting properties of two-dimensional flakes when they are exposed to moisture, organic sol vents, and heat. Here, to realize superconducting devices utilizing two-dimensional superconducting films, we develop a novel fabrication technique relying on the cryogenic dry transfer of printable circuits embedded into a silicon nitride membrane. This approach separates the circuit fabrication stage requiring chemically reactive substances and ionizing physical processes from the creation of the thin superconducting structures. Apart from providing electrical contacts in a single transfer step, the membrane encapsulates the surface of the crystal shielding it from the environment. The fabricated atomically thin Bi2Sr2CaCu2O8+x-based devices show high superconducting transition temperature Tc ~ 91 K close to that of the bulk crystal and demonstrate stable super conducting properties
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Twisted cuprate van der Waals heterostructures with controlled Josephson coupling
Authors:
Mickey Martini,
Ye** Lee,
Tommaso Confalone,
Sanaz Shokri,
Christian N. Saggau,
Daniel Wolf,
Genda Gu,
Kenji Watanabe,
Takashi Taniguchi,
Domenico Montemurro,
Valerii M. Vinokur,
Kornelius Nielsch,
Nicola Poccia
Abstract:
Twisted van der Waals (vdW) heterostructures offer a unique platform for engineering the efficient Josephson coupling between cuprate thin crystals harboring the nodal superconducting order parameter. Preparing vdW heterostructures-based Josephson junction comprising stacked cuprates requires maintaining an ordered interface with preserved surface superconductivity. Here, we report the preparation…
▽ More
Twisted van der Waals (vdW) heterostructures offer a unique platform for engineering the efficient Josephson coupling between cuprate thin crystals harboring the nodal superconducting order parameter. Preparing vdW heterostructures-based Josephson junction comprising stacked cuprates requires maintaining an ordered interface with preserved surface superconductivity. Here, we report the preparation of the Josephson junction out of the stacked Bi2Sr2CuCa2O8+d crystals using the cryogenic dry transfer technique and encapsulating the junction with an insulating layer, that protects the interface during the electrical contacts evaporation at the 10-6 mbar base pressure. We find that the Josephson critical current Ic has a maximum at low twist angles, comparable to that of the bulk intrinsic Josephson junctions, and is reduced by two orders of magnitude at twist angles close to 45°. The reduction of Ic occurs due to a mismatch between superconducting d-wave order parameters, which suppresses the direct Cooper pair tunneling.
△ Less
Submitted 11 February, 2024; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Role of substrate clam** on anisotropy and domain structure in the canted antiferromagnet $α$-Fe$_2$O$_3$
Authors:
Angela Wittmann,
Olena Gomonay,
Kai Litzius,
Allison Kaczmarek,
Alexander E. Kossak,
Daniel Wolf,
Axel Lubk,
Tyler N. Johnson,
Elizaveta A. Tremsina,
Alexandra Churikova,
Felix Büttner,
Sebastian Wintz,
Mohamad-Assaad Mawass,
Markus Weigand,
Florian Kronast,
Larry Scipioni,
Adam Shepard,
Ty Newhouse-Illig,
James A Greer,
Gisela Schütz,
Norman O. Birge,
Geoffrey S. D. Beach
Abstract:
Antiferromagnets have recently been propelled to the forefront of spintronics by their high potential for revolutionizing memory technologies. For this, understanding the formation and driving mechanisms of the domain structure is paramount. In this work, we investigate the domain structure in a thin-film canted antiferromagnet $α$-Fe$_2$O$_3$. We find that the internal destressing fields driving…
▽ More
Antiferromagnets have recently been propelled to the forefront of spintronics by their high potential for revolutionizing memory technologies. For this, understanding the formation and driving mechanisms of the domain structure is paramount. In this work, we investigate the domain structure in a thin-film canted antiferromagnet $α$-Fe$_2$O$_3$. We find that the internal destressing fields driving the formation of domains do not follow the crystal symmetry of $α$-Fe$_2$O$_3$, but fluctuate due to substrate clam**. This leads to an overall isotropic distribution of the Néel order with locally varying effective anisotropy in antiferromagnetic thin films. Furthermore, we show that the weak ferromagnetic nature of $α$-Fe$_2$O$_3$ leads to a qualitatively different dependence on magnetic field compared to collinear antiferromagnets such as NiO. The insights gained from our work serve as a foundation for further studies of electrical and optical manipulation of the domain structure of antiferromagnetic thin films.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
Linear colossal magnetoresistance driven by magnetic textures in LaTiO3 thin films on SrTiO3
Authors:
Teresa Tschirner,
Berengar Leikert,
Felix Kern,
Daniel Wolf,
Axel Lubk,
Martin Kamp,
Kirill Miller,
Fabian Hartmann,
Sven Höfling,
Bernd Büchner,
Joseph Dufouleur,
Marc Gabay,
Michael Sing,
Ralph Claessen,
Louis Veyrat
Abstract:
Linear magnetoresistance (LMR) is of particular interest for memory, electronics, and sensing applications, especially when it does not saturate over a wide range of magnetic fields. One of its principal origins is local mobility or density inhomogeneities, often structural, which in the Parish-Littlewood theory leads to an unsaturating LMR proportional to mobility. Structural disorder, however, a…
▽ More
Linear magnetoresistance (LMR) is of particular interest for memory, electronics, and sensing applications, especially when it does not saturate over a wide range of magnetic fields. One of its principal origins is local mobility or density inhomogeneities, often structural, which in the Parish-Littlewood theory leads to an unsaturating LMR proportional to mobility. Structural disorder, however, also tends to limit the mobility and hence the overall LMR amplitude. An alternative route to achieve large LMR is via non-structural inhomogeneities which do not affect the zero field mobility, like magnetic domains. Here, linear positive magnetoresistance caused by magnetic texture is reported in \ch{LaTiO3}/\ch{SrTiO3} heterostructures. The LMR amplitude reaches up to 6500\% at 9T. This colossal value is understood by the unusual combination of a very high thin film mobility, up to 40 000 cm$^2$/V.s, and a very large coverage of low-mobility regions. These regions correlate with a striped magnetic structure, compatible with a spiral magnetic texture in the \ch{LaTiO3} film, revealed by low temperature Lorentz transmission electron microscopy. These results provide a novel route for the engineering of large-LMR devices.
△ Less
Submitted 14 October, 2022;
originally announced October 2022.
-
Electron Holographic Map** of Structural and Electronic Reconstruction at Mono- and Bilayer Steps of h-BN
Authors:
Subakti Subakti,
Mohammadreza Daqiqshirazi,
Daniel Wolf,
Martin Linck,
Felix L. Kern,
Mitisha Jain,
Silvan Kretschmer,
Arkady V. Krasheninnikov,
Thomas Brumme,
Axel Lubk
Abstract:
Here, by making use of medium and high resolution autocorrected off-axis electron holography, we directly probe the electrostatic potential as well as in-plane and out-of-plane charge delocalization at edges and steps in multilayer hexagonal boron nitride. In combination with ab-initio calculations, the data allows to directly reveal the formation of out-of-plane covalent bonds at folded zig-zag e…
▽ More
Here, by making use of medium and high resolution autocorrected off-axis electron holography, we directly probe the electrostatic potential as well as in-plane and out-of-plane charge delocalization at edges and steps in multilayer hexagonal boron nitride. In combination with ab-initio calculations, the data allows to directly reveal the formation of out-of-plane covalent bonds at folded zig-zag edges and steps comprising two monolayers and the absence of which at monolayer steps. The technique paves the way for studying other charge (de)localization phenomena in 2D materials, e.g., at polar edges, topological edge states and defects.
△ Less
Submitted 8 October, 2022;
originally announced October 2022.
-
Encapsulating high-temperature superconducting twisted van der Waals heterostructures blocks detrimental effects of disorder
Authors:
Ye** Lee,
Mickey Martini,
Tommaso Confalone,
Sanaz Shokri,
Christian N. Saggau,
Daniel Wolf,
Genda Gu,
Kenji Watanabe,
Takashi Taniguchi,
Domenico Montemurro,
Valerii M. Vinokur,
Kornelius Nielsch,
Nicola Poccia
Abstract:
High-temperature cuprate superconductors-based van der Waals (vdW) heterostructures hold high technological promise. One of the obstacles hindering progress is the detrimental effect of disorder on the properties of Josephson junctions (JJ) realized by the vdW devices. Here we report the new method of fabricating twisted vdW heterostructures made of Bi2Sr2CuCa2O8+d, crucially improving the JJ char…
▽ More
High-temperature cuprate superconductors-based van der Waals (vdW) heterostructures hold high technological promise. One of the obstacles hindering progress is the detrimental effect of disorder on the properties of Josephson junctions (JJ) realized by the vdW devices. Here we report the new method of fabricating twisted vdW heterostructures made of Bi2Sr2CuCa2O8+d, crucially improving the JJ characteristics, pushing them up to those of the intrinsic JJs in bulk samples. The method combines a cryogenic stacking using a solvent-free stencil mask technique and covering interface by the insulating hexagonal boron nitride crystals. Despite the high-vacuum condition down to 10-6 mbar in the evaporation chamber, the interface appears to be protected from water molecules during the in-situ metal deposition only when fully encapsulated. Comparing the current-voltage curves of encapsulated and unencapsulated interfaces, we reveal that the encapsulated interfaces' characteristics are crucially improved so that the corresponding JJs demonstrate high critical currents and sharpness of the superconducting transition comparable to those of the intrinsic JJs. Finally, we show that the encapsulated heterostructures are more stable in time.
△ Less
Submitted 6 March, 2023; v1 submitted 5 October, 2022;
originally announced October 2022.
-
Field tunable three-dimensional magnetic nanotextures in cobalt-nickel nanowires
Authors:
I. M. Andersen,
D. Wolf,
L. A. Rodriguez,
A. Lubk,
D. Oliveros,
C. Bran,
T. Niermann,
U. K. Rößler,
M. Vazquez,
C. Gatel,
E. Snoeck
Abstract:
Cylindrical magnetic nanowires with large transversal magnetocrystalline anisotropy have been shown to sustain non-trivial magnetic configurations resulting from the interplay of spatial confinement, exchange, and anisotropies. Exploiting these peculiar 3D spin configurations and their solitonic inhomogeneities are prospected to improve magnetization switching in future spintronics, such as power-…
▽ More
Cylindrical magnetic nanowires with large transversal magnetocrystalline anisotropy have been shown to sustain non-trivial magnetic configurations resulting from the interplay of spatial confinement, exchange, and anisotropies. Exploiting these peculiar 3D spin configurations and their solitonic inhomogeneities are prospected to improve magnetization switching in future spintronics, such as power-saving magnetic memory and logic applications. Here we employ holographic vector field electron tomography to reconstruct the remanent magnetic states in CoNi nanowires with 10 nm resolution in 3D, with a particular focus on domain walls between remanent states and ubiquitous real-structure effects stemming from irregular morphology and anisotropy variations. By tuning the applied magnetic field direction, both longitudinal and transverse multi-vortex states of different chiralities and peculiar 3D features such as shifted vortex cores are stabilized. The chiral domain wall between the longitudinal vortices of opposite chiralities exhibits a complex 3D shape characterized by a push out of the central vortex line and a gain in exchange and anisotropy energy. A similar complex 3D texture, including bent vortex lines, forms at the domain boundary between transverse-vortex states and longitudinal configurations. Micromagnetic simulations allow an understanding of the origin of the observed complex magnetic states.
△ Less
Submitted 28 July, 2021;
originally announced July 2021.
-
Layered van der Waals topological metals of TaTMTe4 (TM = Ir, Rh, Ru) family
Authors:
G. Shipunov,
B. R. Piening,
C. Wuttke,
T. A. Romanova,
A. V. Sadakov,
O. A. Sobolevskiy,
E. Yu. Guzovsky,
A. S. Usoltsev,
V. M. Pudalov,
D. Efremov,
S. Subakti,
D. Wolf,
A. Lubk,
B. Büchner,
S. Aswartham
Abstract:
Layered van~der~Waals materials of the family TaTMTe$_4$ (TM=Ir, Rh, Ru) are showing very interesting electronic properties. Here we report the synthesis, crystal growth and structural characterization of TaIrTe$_4$, TaRhTe$_4$, TaIr$_{1-x}$Rh$_{x}$Te$_4$ ($x = 0.06$; 0.14; 0.78; 0.92) and Ta$_{1+x}$Ru$_{1-x}$Te$_4$ single crystals. For Ta$_{1+x}$Ru$_{1-x}$Te$_4$ off-stoichiometry is shown. X-ray…
▽ More
Layered van~der~Waals materials of the family TaTMTe$_4$ (TM=Ir, Rh, Ru) are showing very interesting electronic properties. Here we report the synthesis, crystal growth and structural characterization of TaIrTe$_4$, TaRhTe$_4$, TaIr$_{1-x}$Rh$_{x}$Te$_4$ ($x = 0.06$; 0.14; 0.78; 0.92) and Ta$_{1+x}$Ru$_{1-x}$Te$_4$ single crystals. For Ta$_{1+x}$Ru$_{1-x}$Te$_4$ off-stoichiometry is shown. X-ray powder diffraction confirms that TaRhTe4 is isostructural to TaIrTe4. We show that all these compounds are metallic with diamagnetic behavior. Ta$_{1.26(2)}$Ru$_{0.75(2)}$Te$_{4.000(8)}$ exhibits an upturn in the resistivity at low temperatures which is strongly field dependent. Below $T \approx 4$K we observed signatures of the superconductivity in the TaIr$_{1-x}$Rh$_{x}$Te$_4$ compounds for $x = 0.92$. Magnetotransport measurements on all samples show weak magnetoresistance (MR) field dependence that is typically quadratic-in-field. However, for TaIr$_{1-x}$Rh$_{x}$Te$_4$ with $x\approx 0.78$, the MR has a linear term dominating in low fields that indicates the presence of Dirac cones in the vicinity of the Fermi energy. For TaRhTe$_4$ series the MR is almost isotropic. We have performed electronic structure calculations for isostructural TaIrTe$_4$ and TaRhTe$_4$ together with the projected total density of states. The main difference is appearance of the Rh-band close to the Fermi level.
△ Less
Submitted 16 May, 2021;
originally announced May 2021.
-
Unveiling the three-dimensional spin texture of skyrmion tubes
Authors:
Daniel Wolf,
Sebastian Schneider,
Ulrich K. Rößler,
András Kovács,
Marcus Schmidt,
Rafal E. Dunin-Borkowski,
Bernd Büchner,
Bernd Rellinghaus,
Axel Lubk
Abstract:
Magnetic skyrmions are stable topological solitons with complex non-coplanar spin structures. Their nanoscopic size and the low electric currents required to initiate and control their motion has opened a new field of research, skyrmionics, that aims at using skyrmions as information carriers for data storage and manipulation. Recent advances in skyrmionics prompt for a thorough understanding of t…
▽ More
Magnetic skyrmions are stable topological solitons with complex non-coplanar spin structures. Their nanoscopic size and the low electric currents required to initiate and control their motion has opened a new field of research, skyrmionics, that aims at using skyrmions as information carriers for data storage and manipulation. Recent advances in skyrmionics prompt for a thorough understanding of the detailed three-dimensional (3D) spin texture of a skyrmion including skyrmion-skyrmion interactions and their coupling to surfaces and interfaces. These properties crucially affect application-related aspects such as the stability and mobility of skyrmions in confined structures. To date, however, experimental techniques to measure the three-dimensional spin texture with nanometer resolution are largely missing. We therefore adapt holographic vector field electron tomography to the problem and report on the first quantitative reconstruction of the 3D spin texture of skyrmions with sub-10 nanometer resolution. The reconstructed textures reveal a variety of previously unseen local deviations from a homogeneous Bloch character within the skyrmion tubes (SkTs), details of the collapse of the skyrmion texture at surfaces, and a correlated modulation of the SkT in FeGe along their tube axes. The quantitative 3D data of the magnetic induction also allow to experimentally confirm some principles of skyrmion formation by deriving spatially resolved maps of the magnetic energy density across these magnetic solitons.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Topological Hall effect arising from the mesoscopic and microscopic non-coplanar magnetic structure in MnBi
Authors:
Yangkun He,
Sebastian Schneider,
Toni Helm,
Jacob Gayles,
Daniel Wolf,
Ivan Soldatov,
Horst Borrmann,
Walter Schnelle,
Rudolf Schaefer,
Gerhard H. Fecher,
Bernd Rellinghaus,
Claudia Felser
Abstract:
The topological Hall effect (THE), induced by the Berry curvature, which originates from non-zero scalar spin chirality, is an important feature for mesoscopic topological structures, such as skyrmions. However, the THE might also arise from other microscopic non-coplanar spin structures in the lattice. Thus, the origin of the THE inevitably needs to be determined to fully understand skyrmions and…
▽ More
The topological Hall effect (THE), induced by the Berry curvature, which originates from non-zero scalar spin chirality, is an important feature for mesoscopic topological structures, such as skyrmions. However, the THE might also arise from other microscopic non-coplanar spin structures in the lattice. Thus, the origin of the THE inevitably needs to be determined to fully understand skyrmions and find new host materials. Here, we examine the Hall effect in both bulk- and micron-sized lamellar samples of MnBi. The sample size affects the temperature and field range in which the THE is detectable. Although bulk sample exhibits the THE only upon exposure to weak fields in the easy-cone state, in thin lamella the THE exists across a wide temperature range and occurs at fields near saturation. Our results show that both the non-coplanar spin structure in the lattice and topologically non-trivial skyrmion bubbles are responsible for the THE, and that the dominant mechanism depends on the sample size. Hence, the magnetic phase diagram for MnBi is strongly size-dependent. Our study provides an example in which the THE is simultaneously induced by two mechanisms, and builds a bridge between mesoscopic and microscopic magnetic structures.
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
Autocorrected Off-axis Holography of 2D Materials
Authors:
Felix Kern,
Martin Linck,
Daniel Wolf,
Nasim Alem,
Himani Arora,
Sibylle Gemming,
Artur Erbe,
Alex Zettl,
Bernd Büchner,
Axel Lubk
Abstract:
The reduced dimensionality in two-dimensional materials leads a wealth of unusual properties, which are currently explored for both fundamental and applied sciences. In order to study the crystal structure, edge states, the formation of defects and grain boundaries, or the impact of adsorbates, high resolution microscopy techniques are indispensible. Here we report on the development of an electro…
▽ More
The reduced dimensionality in two-dimensional materials leads a wealth of unusual properties, which are currently explored for both fundamental and applied sciences. In order to study the crystal structure, edge states, the formation of defects and grain boundaries, or the impact of adsorbates, high resolution microscopy techniques are indispensible. Here we report on the development of an electron holography (EH) transmission electron microscopy (TEM) technique, which facilitates high spatial resolution by an automatic correction of geometric aberrations. Distinguished features of EH beyond conventional TEM imaging are the gap-free spatial information signal transfer and higher dose efficiency for certain spatial frequency bands as well as direct access to the projected electrostatic potential of the 2D material. We demonstrate these features at the example of h-BN, at which we measure the electrostatic potential as a function of layer number down to the monolayer limit and obtain evidence for a systematic increase of the potential at the zig-zag edges.
△ Less
Submitted 25 June, 2020; v1 submitted 24 June, 2020;
originally announced June 2020.
-
Building hierarchical martensite
Authors:
Stefan Schwabe,
Robert Niemann,
Anja Backen,
Daniel Wolf,
Christine Damm,
Tina Walter,
Hanus Seiner,
Oleg Heczko,
Kornelius Nielsch,
Sebastian Fähler
Abstract:
Martensitic materials show a complex, hierarchical microstructure containing structural domains separated by various types of twin boundaries. Several concepts exist to describe this microstructure on each length scale, however, there is no comprehensive approach bridging the whole range from the nano- up to the macroscopic scale. Here, we describe for a Ni-Mn-based Heusler alloy how this hierarch…
▽ More
Martensitic materials show a complex, hierarchical microstructure containing structural domains separated by various types of twin boundaries. Several concepts exist to describe this microstructure on each length scale, however, there is no comprehensive approach bridging the whole range from the nano- up to the macroscopic scale. Here, we describe for a Ni-Mn-based Heusler alloy how this hierarchical microstructure is built from scratch with just one key parameter: the tetragonal distortion of the basic building block at the atomic level. Based on this initial block, we introduce five successive levels of nested building blocks. At each level, a larger building block is formed by twinning the preceding one to minimise the relevant energy contributions locally. This naturally explains the occurrence of different types of twin boundaries. We compare this scale-bridging approach of nested building blocks with experiments in real and reciprocal space. Our approach of nested building blocks is versatile as it can be applied to the broad class of functional materials exhibiting diffusionless transformations.
△ Less
Submitted 21 April, 2020;
originally announced April 2020.
-
The incommensurate magnet iron monophosphide FeP: Crystal growth and characterization
Authors:
I. O. Chernyavskii,
S. E. Nikitin,
Y. A. Onykiienko,
D. S. Inosov,
Q. Stahl,
J. Geck,
X. C. Hong,
C. Hess,
S. Gaß,
A. U. B. Wolter,
D. Wolf,
A. Lubk,
D. V. Efremov,
F. Yokaichiya,
S. Aswartham,
B. Büchner,
I. V. Morozov
Abstract:
We report an optimized chemical vapor transport method, which allows growing FeP single crystals up to 500 mg in mass and 80 $mm^{3}$ in volume. The high quality of the crystals obtained by this method was confirmed by means of EDX, high-resolution TEM, low-temperature single crystal XRD and neutron diffraction experiments. We investigated the transport and magnetic properties of the single crysta…
▽ More
We report an optimized chemical vapor transport method, which allows growing FeP single crystals up to 500 mg in mass and 80 $mm^{3}$ in volume. The high quality of the crystals obtained by this method was confirmed by means of EDX, high-resolution TEM, low-temperature single crystal XRD and neutron diffraction experiments. We investigated the transport and magnetic properties of the single crystals and calculated the electronic band structure of FeP. We show both theoretically and experimentally, that the ground state of FeP is metallic. The examination of the magnetic data reveals antiferromagnetic order below T$_{N}$ =119 K while transport remains metallic in both the paramagnetic and the antiferromagnetic phase. The analysis of the neutron diffraction data shows an incommensurate magnetic structure with the propagation vector Q=(0, 0, $\pmδ$), where $δ$ $\sim$ 0.2. For the full understanding of the magnetic state, further experiments are needed. The successful growth of large high-quality single crystals opens the opportunity for further investigations of itinerant magnets with incommensurate spin structures using a wide range of experimental tools.
△ Less
Submitted 31 March, 2020; v1 submitted 24 March, 2020;
originally announced March 2020.
-
Polymorphic PtBi2: Growth, structure and superconducting properties
Authors:
G. Shipunov,
I. Kovalchuk,
B. R. Piening,
V. Labracherie,
A. Veyrat,
D. Wolf,
A. Lubk,
S. Subakti,
R. Giraud,
J. Dufouleur,
S. Shokri,
F. Caglieris,
C. Hess,
D. V. Efremov,
B. Büchner,
S. Aswartham
Abstract:
PtBi$_2$ is a polymorphic system with interesting electronic properties. Here we report optimized crystal growth and structural characterization of pyrite-type and trigonal modification of PtBi$_2$. Selected area electron diffraction, X-ray powder diffraction and further Rietveld refinement confirms that trigonal PtBi$_2$ crystallizes in non-centrosymmetric $P31m$ space group, pyrite-type PtBi…
▽ More
PtBi$_2$ is a polymorphic system with interesting electronic properties. Here we report optimized crystal growth and structural characterization of pyrite-type and trigonal modification of PtBi$_2$. Selected area electron diffraction, X-ray powder diffraction and further Rietveld refinement confirms that trigonal PtBi$_2$ crystallizes in non-centrosymmetric $P31m$ space group, pyrite-type PtBi$_2$ in $Pa\bar{3}$ space group. Series of Pt$_{1-x}$Rh$_x$Bi$_2$ samples was obtained for $x=0, 0.03, 0.35$ in the trigonal PtBi$_2$ structure. These Pt$_{1-x}$Rh$_x$Bi$_2$ compounds become superconducting where critical temperature increases from $T_c=600$ mK for $x=0$ up to $T_c=2.7$ K for $x=0.35$. Furthermore we calculate the electronic band structure, using the structure parameters obtained. The calculated density of states (DOS) shows a minimum for the stochiometric compound at the Fermi level. These findings warrant further research by broader array of experimental techniques, as well as the effect of the substitution on the non-trivial band structure.
△ Less
Submitted 8 December, 2020; v1 submitted 10 February, 2020;
originally announced February 2020.
-
Investigation of the surface properties of different highly aligned N-MWCNT carpets
Authors:
V. Eckert,
E. Haubold,
S. Oswald,
S. Michel,
C. Bellmann,
P. Potapov,
D. Wolf,
S. Hampel,
B. Büchner,
M. Mertig,
A. Leonhardt
Abstract:
We investigated the physicochemical surface properties of different highly aligned nitrogen-doped multi-walled carbon nanotube (N-MWCNT) carpets, synthesized using toluene/pyrazine, toluene/benzylamine and acetonitrile via a sublimation-based chemical vapor deposition (SCVD) method at 760°C. The surfaces of the N-MWCNT carpets synthesized using toluene/pyrazine and toluene/benzylamine were very hy…
▽ More
We investigated the physicochemical surface properties of different highly aligned nitrogen-doped multi-walled carbon nanotube (N-MWCNT) carpets, synthesized using toluene/pyrazine, toluene/benzylamine and acetonitrile via a sublimation-based chemical vapor deposition (SCVD) method at 760°C. The surfaces of the N-MWCNT carpets synthesized using toluene/pyrazine and toluene/benzylamine were very hydrophobic. In contrast, we observed a complete wetting of the N-MWCNT carpets synthesized using acetonitrile. The difference in the wetting behavior of these N-MWCNT carpets is the main focus in this study and was not investigated before. Here, we show that not only the presence or concentration of nitrogen inside the carbon lattice, but especially it's kind of incorporation have an important influence on the surface polarity.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Nanoscale spectroscopic imaging of GaAs-AlGaAs quantum well tube nanowires: correlating luminescence with nanowire size and inner multishell structure
Authors:
Paola Prete,
Daniel Wolf,
Fabio Marzo,
Nico Lovergine
Abstract:
The luminescence and inner structure of GaAs-AlGaAs quantum well tube (QWT) nanowires were studied using low-temperature cathodoluminescence (CL) spectroscopic imaging, in combination with scanning transmission electron microscopy (STEM) tomography, allowing for the first time a robust correlation between the luminescence properties of these nanowires and their size and inner 3D structure down to…
▽ More
The luminescence and inner structure of GaAs-AlGaAs quantum well tube (QWT) nanowires were studied using low-temperature cathodoluminescence (CL) spectroscopic imaging, in combination with scanning transmission electron microscopy (STEM) tomography, allowing for the first time a robust correlation between the luminescence properties of these nanowires and their size and inner 3D structure down to the nanoscale. Besides the core luminescence and minor defects-related contributions, each nanowire showed one or more QWT peaks associated with nanowire regions of different diameters. The values of the GaAs shell thickness corresponding to each QWT peak were then determined from the nanowire diameters by employing a multishell growth model upon validation against experimental data (core diameter and GaAs and AlGaAs shell thickness) obtained from the analysis of the 3D reconstructed STEM tomogram of a GaAs-AlGaAs QWT nanowire. We found that QWT peak energies as a function of thus-estimated (3-7 nm) GaAs shell thickness are 40-120 meV below the theoretical values of exciton recombination for uniform QWTs symmetrically wrapped around a central core. However, the analysis of the 3D tomogram further evidenced azimuthal asymmetries as well as (azimuthal and axial) random fluctuations of the GaAs shell thickness, suggesting that the red-shift of QWT emissions is prominently due to carrier localization. The CL map** of QWT emission intensities along the nanowire axis allowed to directly image the nanoscale localization of the emission, supporting the above picture. Our findings contribute to a deeper understanding of the luminescence-structure relationship in QWT nanowires and will foster their applications as efficient nanolaser sources for future monolithic integration onto silicon.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Silver particles with rhombicuboctahedral shape and effectively isotropic interactions with light
Authors:
Anja Maria Steiner,
Martin Mayer,
Daniel Schletz,
Daniel Wolf,
Petr Formanek,
René Hübner,
Martin Dulle,
Stephan Förster,
Tobias A. F. König,
Andreas Fery
Abstract:
Truly spherical silver nanoparticles are of great importance for fundamental studies including plasmonic applications, but the direct synthesis in aqueous media is not feasible. Using the commonly employed copper-based etching processes, isotropicplasmonic response can be achieved by etching well-defined silver nanocubes. Whilst spherical like shape is typically prevailing in such processes, we es…
▽ More
Truly spherical silver nanoparticles are of great importance for fundamental studies including plasmonic applications, but the direct synthesis in aqueous media is not feasible. Using the commonly employed copper-based etching processes, isotropicplasmonic response can be achieved by etching well-defined silver nanocubes. Whilst spherical like shape is typically prevailing in such processes, we established that there is a preferential growth towards silver rhombicuboctahedra (AgRCOs), which is thethermodynamically most stable product of this synthesis. The rhombicuboctahedral morphology is further evidenced by comprehensive characterization with small-angle X-ray scattering in combination with TEM tomographyand high resolution TEM. Wealso elucidate the complete reaction mechanism based on UV-Vis kinetic studies, and the postulated mechanism can also be extended to all copper-based etching processes.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Magnetic Nanoparticle Chains in Gelatin Ferrogels: Bioinspiration from Magnetotactic Bacteria
Authors:
Sebastian Sturm,
Maria Siglreitmeier,
Daniel Wolf,
Karin Vogel,
Micha Gratz,
Damien Faivre,
Axel Lubk,
Bernd Büchner,
Elena V. Sturm,
Helmut Cölfen
Abstract:
Inspired by chains of ferrimagnetic nanocrystals (NCs) in magnetotactic bacteria (MTB), the synthesis and detailed characterization of ferrimagnetic magnetite NC chain-like assemblies is reported. An easy green synthesis route in a thermoreversible gelatin hydrogel matrix is used. The structure of these magnetite chains prepared with and without gelatin is characterized by means of transmission el…
▽ More
Inspired by chains of ferrimagnetic nanocrystals (NCs) in magnetotactic bacteria (MTB), the synthesis and detailed characterization of ferrimagnetic magnetite NC chain-like assemblies is reported. An easy green synthesis route in a thermoreversible gelatin hydrogel matrix is used. The structure of these magnetite chains prepared with and without gelatin is characterized by means of transmission electron microscopy, including electron tomography (ET). These structures indeed bear resemblance to the magnetite assemblies found in MTB, known for their mechanical flexibility and outstanding magnetic properties and known to crystallographically align their magnetite NCs along the strongest <111> magnetization easy axis. Using electron holography (EH) and angular dependent magnetic measurements, the magnetic interaction between the NCs and the generation of a magnetically anisotropic material can be shown. The electro- and magnetostatic modeling demonstrates that in order to precisely determine the magnetization (by means of EH) inside chain-like NCs assemblies, their exact shape, arrangement and stray-fields have to be considered (ideally obtained using ET).
△ Less
Submitted 16 October, 2019;
originally announced October 2019.
-
Three-dimensional imaging of beam-induced biasing of InP/GaInP tunnel diodes
Authors:
Cristina Cordoba,
Xulu Zeng,
Daniel Wolf,
Axel Lubk,
Enrique Barrigón,
Magnus T. Borgström,
Karen L. Kavanagh
Abstract:
Electron Holographic Tomography was used to obtain 3-dimensional reconstructions of the morphology and electrostatic potential gradient of axial GaInP/InP nanowire tunnel diodes. Crystal growth was carried out in two opposite directions: GaInP:Zn/InP:S and InP:Sn/GaInP:Zn, using Zn as the p-type dopant in the GaInP, but with changes to the n-type dopant (S or Sn) in the InP. Secondary electron and…
▽ More
Electron Holographic Tomography was used to obtain 3-dimensional reconstructions of the morphology and electrostatic potential gradient of axial GaInP/InP nanowire tunnel diodes. Crystal growth was carried out in two opposite directions: GaInP:Zn/InP:S and InP:Sn/GaInP:Zn, using Zn as the p-type dopant in the GaInP, but with changes to the n-type dopant (S or Sn) in the InP. Secondary electron and electron beam induced current images obtained using scanning electron microscopy indicated the presence of p-n junctions in both cases and current-voltage characteristics measured via lithographic contacts showed the negative differential resistance, characteristic of band-to-band tunneling, for both diodes. EHT measurements confirmed a short depletion width in both cases ($21 \pm 3$ nm), but different built-in potentials, $V_{bi}$, of 1.0 V for the p-type (Zn) to n-type (S) transition, and 0.4 V for both were lower than the expected 1.5 V for these junctions, if degenerately-doped. Charging induced by the electron beam was evident in phase images which showed non-linearity in the surrounding vacuum, most severe in the case of the nanowire grounded at the \emph{p}-type Au contact. We attribute their lower $V_{bi}$ to asymmetric secondary electron emission, beam-induced current biasing and poor grounding contacts.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
Site-controlled formation of single Si nanocrystals in a buried SiO2 matrix using ion beam mixing
Authors:
Xiaomo Xu,
Thomas Prüfer,
Daniel Wolf,
Hans-Jürgen Engelmann,
Lothar Bischoff,
René Hübner,
Karl-Heinz Heinig,
Wolfhard Möller,
Stefan Facsko,
Johannes von Borany,
Gregor Hlawacek
Abstract:
For future nanoelectronic devices - such as room-temperature single electron transistors - the site-controlled formation of single Si nanocrystals (NCs) is a crucial prerequisite. Here, we report an approach to fabricate single Si NCs via medium-energy Si+ or Ne+ ion beam mixing of Si into a buried SiO2 layer followed by thermally activated phase separation. Binary collision approximation and kine…
▽ More
For future nanoelectronic devices - such as room-temperature single electron transistors - the site-controlled formation of single Si nanocrystals (NCs) is a crucial prerequisite. Here, we report an approach to fabricate single Si NCs via medium-energy Si+ or Ne+ ion beam mixing of Si into a buried SiO2 layer followed by thermally activated phase separation. Binary collision approximation and kinetic Monte Carlo methods are conducted to gain atomistic insight into the influence of relevant experimental parameters on the Si NC formation process. Energy-filtered transmission electron microscopy is performed to obtain quantitative values on the Si NC size and distribution in dependence of the layer stack geometry, ion fluence and thermal budget. Employing a focused Ne+ beam from a helium ion microscope, we demonstrate site-controlled self-assembly of single Si NCs. Line irradiation with a fluence of 3000 Ne+/nm2 and a line width of 4 nm leads to the formation of a chain of Si NCs, and a single NC with 2.2 nm diameter is subsequently isolated and visualized in a few nanometer thin lamella prepared by a focused ion beam (FIB). The Si NC is centered between the SiO2 layers and perpendicular to the incident Ne+ beam.
△ Less
Submitted 10 October, 2019;
originally announced October 2019.
-
Holographic Vector Field Electron Tomography of Three-Dimensional Nanomagnets
Authors:
Daniel Wolf,
Nicolas Biziere,
Sebastian Sturm,
David Reyes,
Travis Wade,
Tore Niermann,
Jonas Krehl,
Benedicte Warot-Fonrose,
Bernd Büchner,
Etienne Snoeck,
Christophe Gatel,
Axel Lubk
Abstract:
Complex 3D magnetic textures in nanomagnets exhibit rich physical properties, for example in their dynamic interaction with external fields and currents, and play an increasing role for current technological challenges such as energy-efficient memory devices. To study these magnetic nanostructures including their dependency on geometry, composition and crystallinity, a 3D characterization of the m…
▽ More
Complex 3D magnetic textures in nanomagnets exhibit rich physical properties, for example in their dynamic interaction with external fields and currents, and play an increasing role for current technological challenges such as energy-efficient memory devices. To study these magnetic nanostructures including their dependency on geometry, composition and crystallinity, a 3D characterization of the magnetic field with nanometer spatial resolution is indispensable. Here we show how holographic vector field electron tomography can reconstruct all three components of magnetic induction as well as the electrostatic potential of a Co/Cu nanowire with sub 10\,nm spatial resolution. We address the workflow from acquisition, via image alignment to holographic and tomographic reconstruction. Combining the obtained tomographic data with micromagnetic considerations we derive local key magnetic characteristics, such as magnetization current or exchange stiffness, and demonstrate how magnetization configurations, such as vortex states in the Co-disks, depend on small structural variations of the as-grown nanowire.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
Reciprocal skin effect and its realization in a topolectrical circuit
Authors:
Tobias Hofmann,
Tobias Helbig,
Frank Schindler,
Nora Salgo,
Marta Brzezińska,
Martin Greiter,
Tobias Kiessling,
David Wolf,
Achim Vollhardt,
Anton Kabaši,
Ching Hua Lee,
Ante Bilušić,
Ronny Thomale,
Titus Neupert
Abstract:
A system is non-Hermitian when it exchanges energy with its environment and non-reciprocal when it behaves differently upon the interchange of input and response. Within the field of metamaterial research on synthetic topological matter, the skin effect describes the conspiracy of non-Hermiticity and non-reciprocity to yield extensive anomalous localization of all eigenmodes in a (quasi) one-dimen…
▽ More
A system is non-Hermitian when it exchanges energy with its environment and non-reciprocal when it behaves differently upon the interchange of input and response. Within the field of metamaterial research on synthetic topological matter, the skin effect describes the conspiracy of non-Hermiticity and non-reciprocity to yield extensive anomalous localization of all eigenmodes in a (quasi) one-dimensional geometry. Here, we introduce the reciprocal skin effect, which occurs in non-Hermitian but reciprocal systems in two or more dimensions: Eigenmodes with opposite longitudinal momentum exhibit opposite transverse anomalous localization. We experimentally demonstrate the reciprocal skin effect in a passive RLC circuit, suggesting convenient alternative implementations in optical, acoustic, mechanical, and related platforms. Skin mode localization brings forth potential applications in directional and polarization detectors for electromagnetic waves.
△ Less
Submitted 4 June, 2020; v1 submitted 7 August, 2019;
originally announced August 2019.
-
Three-dimensional composition and electric potential map** of III-V core-multishell nanowires by correlative STEM and holographic tomography
Authors:
Daniel Wolf,
René Hübner,
Tore Niermann,
Sebastian Sturm,
Paola Prete,
Nico Lovergine,
Bernd Büchner,
Axel Lubk
Abstract:
The non-destructive characterization of nanoscale devices, such as those based on semiconductor nanowires, in terms of functional potentials is crucial for correlating device properties with their morphological/materials features, as well as for precisely tuning and optimizing their growth process. Electron holographic tomography (EHT) has been used in the past to reconstruct the total potential d…
▽ More
The non-destructive characterization of nanoscale devices, such as those based on semiconductor nanowires, in terms of functional potentials is crucial for correlating device properties with their morphological/materials features, as well as for precisely tuning and optimizing their growth process. Electron holographic tomography (EHT) has been used in the past to reconstruct the total potential distribution in 3D but hitherto lacked a quantitative approach to separate potential variations due to chemical composition changes (mean inner potential - MIP) and space charges. In this letter, we combine and correlate EHT and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) tomography on an individual <111> oriented GaAs-AlGaAs core-multishell nanowire (NW). We obtain excellent agreement between both methods in terms of the determined Al concentration within the AlGaAs shell, as well as thickness variations of the few nanometer thin GaAs shell acting as quantum well tube. Subtracting the MIP determined from the STEM tomogram, enables us to observe functional potentials at the NW surfaces and at the Au-NW interface, both ascribed to surface/interface pinning of the semiconductor Fermi level.
△ Less
Submitted 9 October, 2018;
originally announced October 2018.
-
$\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ Alloy Nanoparticles Encapsulated inside Carbon Nanotubes: Controlled Synthesis, Structure and Magnetic Properties
Authors:
Rasha Ghunaim,
Christine Damm,
Daniel Wolf,
Axel Lubk,
Bernd Büchner,
Michael Mertig,
Silke Hampel
Abstract:
In the present work, different synthesis procedures have been demonstrated to fill carbon nanotubes (CNTs) with $\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ alloy nanoparticles (x = 0.33, 0.5). CNTs act as templates for the encapsulation of magnetic nanoparticles, and provide a protective shield against oxidation as well as prevent nanoparticles agglomeration. By variation of the reaction parameters, the puri…
▽ More
In the present work, different synthesis procedures have been demonstrated to fill carbon nanotubes (CNTs) with $\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ alloy nanoparticles (x = 0.33, 0.5). CNTs act as templates for the encapsulation of magnetic nanoparticles, and provide a protective shield against oxidation as well as prevent nanoparticles agglomeration. By variation of the reaction parameters, the purity of the samples, degree of filling, the composition and size of filling nanoparticles have been tailored and therefore the magnetic properties. The samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Bright-field (BF) TEM tomography, X-ray powder diffraction, superconducting quantum interference device (SQUID) and thermogravimetric analysis (TGA). The Fe1-xNix-filled CNTs show a huge enhancement in the coercive fields compared to the corresponding bulk materials, which make them excellent candidates for several applications such as magnetic storage devices.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
-
Induction Map** of the 3D-Modulated Spin Texture of Skyrmions in Thin Helimagnets
Authors:
Sebastian Schneider,
Daniel Wolf,
Matthew J. Stolt,
Song **,
Darius Pohl,
Bernd Rellinghaus,
Marcus Schmidt,
Bernd Büchner,
Sebastian T. B. Goennenwein,
Kornelius Nielsch,
Axel Lubk
Abstract:
Envisaged applications of skyrmions in magnetic memory and logic devices crucially depend on the stability and mobility of these topologically non-trivial magnetic textures in thin films. We present for the first time quantitative maps of the magnetic induction that provide evidence for a 3D modulation of the skyrmionic spin texture. The projected in-plane magnetic induction maps as determined fro…
▽ More
Envisaged applications of skyrmions in magnetic memory and logic devices crucially depend on the stability and mobility of these topologically non-trivial magnetic textures in thin films. We present for the first time quantitative maps of the magnetic induction that provide evidence for a 3D modulation of the skyrmionic spin texture. The projected in-plane magnetic induction maps as determined from in-line and off-axis electron holography carry the clear signature of Bloch skyrmions. However, the magnitude of this induction is much smaller than the values expected for homogeneous Bloch skyrmions that extend throughout the thickness of the film. This finding can only be understood, if the underlying spin textures are modulated along the out-of-plane z direction. The projection of (the in-plane magnetic induction of) helices is further found to exhibit thickness-dependent lateral shifts, which show that this z modulation is accompanied by an (in-plane) modulation along the x and y directions.
△ Less
Submitted 29 March, 2018; v1 submitted 23 October, 2017;
originally announced October 2017.
-
Nonequilibrium distribution functions in electron transport: Decoherence, energy redistribution and dissipation
Authors:
Thomas Stegmann,
Orsolya Ujsághy,
Dietrich E. Wolf
Abstract:
A new statistical model for the combined effects of decoherence, energy redistribution and dissipation on electron transport in large quantum systems is introduced. The essential idea is to consider the electron phase information to be lost only at randomly chosen regions with an average distance corresponding to the decoherence length. In these regions the electron's energy can be unchanged or re…
▽ More
A new statistical model for the combined effects of decoherence, energy redistribution and dissipation on electron transport in large quantum systems is introduced. The essential idea is to consider the electron phase information to be lost only at randomly chosen regions with an average distance corresponding to the decoherence length. In these regions the electron's energy can be unchanged or redistributed within the electron system or dissipated to a heat bath. The different types of scattering and the decoherence leave distinct fingerprints in the energy distribution functions. They can be interpreted as a mixture of unthermalized and thermalized electrons. In the case of weak decoherence, the fraction of thermalized electrons show electrical and thermal contact resistances. In the regime of incoherent transport the proposed model is equivalent to a Boltzmann equation. The model is applied to experiments with carbon nanotubes. The excellent agreement of the model with the experimental data allows to determine the scattering lengths of the system.
△ Less
Submitted 25 April, 2018; v1 submitted 22 September, 2017;
originally announced September 2017.
-
Thermal resistance of grain boundaries in silicon nanowires by nonequilibrium molecular dynamics
Authors:
J. K. Bohrer,
K. Schröer,
L. Brendel,
D. E. Wolf
Abstract:
The thermal boundary resistance (Kapitza resistance) of (001) twist grain boundaries in silicon nanowires depends on the mismatch angle. This dependence is systematically investigated by means of nonequilibrium molecular dynamics simulations. Grain boundary systems with and without coincidence site lattice are compared. The Kapitza resistance increases with twist angle up to 40°. For larger angles…
▽ More
The thermal boundary resistance (Kapitza resistance) of (001) twist grain boundaries in silicon nanowires depends on the mismatch angle. This dependence is systematically investigated by means of nonequilibrium molecular dynamics simulations. Grain boundary systems with and without coincidence site lattice are compared. The Kapitza resistance increases with twist angle up to 40°. For larger angles, it varies only little around 1.56 $\pm$ 0.05 K m^2/GW, except for a drop by 30% near the 90° Σ 1 grain boundary. Finite size effects due to the fixed outer boundary conditions of the nanowire are negligible for diameters larger than 25 nm.
△ Less
Submitted 25 January, 2017;
originally announced January 2017.
-
Network theory for inhomogeneous thermoelectrics
Authors:
Sebastian Angst,
Dietrich E. Wolf
Abstract:
The Onsager-de Groot-Callen transport theory, implemented as a network model, is used to simulate the transient Harman method, which is widely used experimentally to determine all thermoelectric transport coefficients in a single measurement setup. It is shown that this method systematically overestimates the Seebeck coefficient for samples composed of two different materials. As a consequence, th…
▽ More
The Onsager-de Groot-Callen transport theory, implemented as a network model, is used to simulate the transient Harman method, which is widely used experimentally to determine all thermoelectric transport coefficients in a single measurement setup. It is shown that this method systematically overestimates the Seebeck coefficient for samples composed of two different materials. As a consequence, the figure of merit is also overestimated, if the thermal coupling of the measurement setup to the environment is weak. For a mixture of metal and semiconductor particles near metal percolation the figure of merit obtained by the Harman method is more than 100 \% too large. For a correct interpretation of the experimental data, information on composition and microstructure of the sample are indispensable.
△ Less
Submitted 14 December, 2015;
originally announced December 2015.
-
Anisotropy of force distributions in sheared soft particle systems
Authors:
Jens Boberski,
M. Reza Shaebani,
Dietrich E. Wolf
Abstract:
In this numerical study, measurements of the contact forces inside a periodic two-dimensional sheared system of soft frictional particles are reported. The distribution of normalized normal forces exhibits a gradual broadening with increasing the pure shear deformation, leading to a slower decay for large forces. The process however slows down and the distribution approaches an invariant shape at…
▽ More
In this numerical study, measurements of the contact forces inside a periodic two-dimensional sheared system of soft frictional particles are reported. The distribution of normalized normal forces exhibits a gradual broadening with increasing the pure shear deformation, leading to a slower decay for large forces. The process however slows down and the distribution approaches an invariant shape at high shear deformations. By introducing the joint probability distribution in sheared configurations, it is shown that for a fixed direction, the force distribution decays faster than exponentially even in a sheared system. The overall broadening can be attributed to the averaging over different directions in the presence of shear-induced stress anisotropy. The distribution of normalized tangential forces almost preserves its shape for arbitrary applied strain.
△ Less
Submitted 27 September, 2014;
originally announced September 2014.
-
Nanometer-scale Tomographic Reconstruction of 3D Electrostatic Potentials in GaAs/AlGaAs Core-Shell Nanowires
Authors:
A. Lubk,
D. Wolf,
P. Prete,
N. Lovergine,
T. Niermann,
S. Sturm,
H. Lichte
Abstract:
We report on the development of Electron Holographic Tomography towards a versatile potential measurement technique, overcoming several limitations, such as a limited tilt range, previously hampering a reproducible and accurate electrostatic potential reconstruction in three dimensions. Most notably, tomographic reconstruction is performed on optimally sampled polar grids taking into account symme…
▽ More
We report on the development of Electron Holographic Tomography towards a versatile potential measurement technique, overcoming several limitations, such as a limited tilt range, previously hampering a reproducible and accurate electrostatic potential reconstruction in three dimensions. Most notably, tomographic reconstruction is performed on optimally sampled polar grids taking into account symmetry and other spatial constraints of the nanostructure. Furthermore, holographic tilt series acquisition and alignment have been automated and adapted to three dimensions. We demonstrate 6 nm spatial and 0.2 V signal resolution by reconstructing various, previously hidden, potential details of a GaAs/AlGaAs core-shell nanowire. The improved tomographic reconstruction opens pathways towards the detection of minute potentials in nanostructures and an increase in speed and accuracy in related techniques such as X-ray tomography.
△ Less
Submitted 7 July, 2014;
originally announced July 2014.
-
Recent advances in the simulation of particle-laden flows
Authors:
Jens Harting,
Stefan Frijters,
Marco Ramaioli,
Martin Robinson,
Dietrich E. Wolf,
Stefan Luding
Abstract:
A substantial number of algorithms exists for the simulation of moving particles suspended in fluids. However, finding the best method to address a particular physical problem is often highly non-trivial and depends on the properties of the particles and the involved fluid(s) together. In this report we provide a short overview on a number of existing simulation methods and provide two state of th…
▽ More
A substantial number of algorithms exists for the simulation of moving particles suspended in fluids. However, finding the best method to address a particular physical problem is often highly non-trivial and depends on the properties of the particles and the involved fluid(s) together. In this report we provide a short overview on a number of existing simulation methods and provide two state of the art examples in more detail. In both cases, the particles are described using a Discrete Element Method (DEM). The DEM solver is usually coupled to a fluid-solver, which can be classified as grid-based or mesh-free (one example for each is given). Fluid solvers feature different resolutions relative to the particle size and separation. First, a multicomponent lattice Boltzmann algorithm (mesh-based and with rather fine resolution) is presented to study the behavior of particle stabilized fluid interfaces and second, a Smoothed Particle Hydrodynamics implementation (mesh-free, meso-scale resolution, similar to the particle size) is introduced to highlight a new player in the field, which is expected to be particularly suited for flows including free surfaces.
△ Less
Submitted 25 June, 2014;
originally announced June 2014.
-
Coexistence and Transition between Shear Zones in Slow Granular Flows
Authors:
Robabeh Moosavi,
M. Reza Shaebani,
Maniya Maleki,
Janos Torok,
Dietrich E. Wolf,
Wolfgang Losert
Abstract:
We report experiments on slow granular flows in a split-bottom Couette cell that show novel strain localization features. Nontrivial flow profiles have been observed which are shown to be the consequence of simultaneous formation of shear zones in the bulk and at the boundaries. The fluctuating band model based on a minimization principle can be fitted to the experiments over a large variation of…
▽ More
We report experiments on slow granular flows in a split-bottom Couette cell that show novel strain localization features. Nontrivial flow profiles have been observed which are shown to be the consequence of simultaneous formation of shear zones in the bulk and at the boundaries. The fluctuating band model based on a minimization principle can be fitted to the experiments over a large variation of morphology and filling height with one single fit parameter, the relative friction coefficient between wall and bulk. The possibility of multiple shear zone formation is controlled by the relative friction. Moreover, we observe that the symmetry of an initial state, with coexisting shear zones at both side walls, breaks spontaneously below a threshold value of the shear velocity. A dynamical transition between two asymmetric flow states happens over a characteristic time scale which depends on the shear strength.
△ Less
Submitted 20 September, 2013;
originally announced September 2013.
-
Long-range interactions in randomly driven granular fluids
Authors:
M. Reza Shaebani,
Jalal Sarabadani,
Dietrich E. Wolf
Abstract:
We study the long-range spatial correlations in the nonequilibrium steady state of a randomly driven granular fluid with the emphasis on obtaining the explicit form of the static structure factors. The presence of immobile particles immersed in such a fluidized bed of fine particles leads to the confinement of the fluctuation spectrum of the hydrodynamic fields, which results in effective long-ran…
▽ More
We study the long-range spatial correlations in the nonequilibrium steady state of a randomly driven granular fluid with the emphasis on obtaining the explicit form of the static structure factors. The presence of immobile particles immersed in such a fluidized bed of fine particles leads to the confinement of the fluctuation spectrum of the hydrodynamic fields, which results in effective long-range interactions between the intruders. The analytical predictions are in agreement with the results of discrete element method simulations. By changing the shape and orientation of the intruders, we address how the effective force is affected by small changes in the boundary conditions.
△ Less
Submitted 3 September, 2013;
originally announced September 2013.
-
Localization under the effect of randomly distributed decoherence
Authors:
Thomas Stegmann,
Orsolya Ujsághy,
Dietrich E. Wolf
Abstract:
Electron transport through disordered quasi one-dimensional quantum systems is studied. Decoherence is taken into account by a spatial distribution of virtual reservoirs, which represent local interactions of the conduction electrons with their environment. We show that the decoherence distribution has observable effects on the transport. If the decoherence reservoirs are distributed randomly with…
▽ More
Electron transport through disordered quasi one-dimensional quantum systems is studied. Decoherence is taken into account by a spatial distribution of virtual reservoirs, which represent local interactions of the conduction electrons with their environment. We show that the decoherence distribution has observable effects on the transport. If the decoherence reservoirs are distributed randomly without spatial correlations, a minimal degree of decoherence is necessary to obtain Ohmic conduction. Below this threshold the system is localized and thus, a decoherence driven metal-insulator transition is found. In contrast, for homogenously distributed decoherence, any finite degree of decoherence is sufficient to destroy localization. Thus, the presence or absence of localization in a disordered one-dimensional system may give important insight about how the electron phase is randomized.
△ Less
Submitted 5 February, 2014; v1 submitted 20 August, 2013;
originally announced August 2013.
-
Evolution of the force distributions in jammed packings of soft particles
Authors:
Jens Boberski,
M. Reza Shaebani,
Dietrich E. Wolf
Abstract:
The evolution of the force distributions during the isotropic compression of two dimensional packings of soft frictional particles is investigated numerically. Regardless of the applied deformation, the normal contact force distribution can be fitted by the product of a power-law, and a stretched exponential, while the tangential force distribution is fitted well by a Gaussian. With increasing str…
▽ More
The evolution of the force distributions during the isotropic compression of two dimensional packings of soft frictional particles is investigated numerically. Regardless of the applied deformation, the normal contact force distribution can be fitted by the product of a power-law, and a stretched exponential, while the tangential force distribution is fitted well by a Gaussian. With increasing strain, the asymptotic behavior at large forces does not change, but both normal and tangential distributions exhibit a broadening, even though, when scaled with the average forces, their widths decrease. Furthermore, the distribution of friction mobilization is a decreasing function of the mobilization, except for an increased probability of fully mobilized contacts. The excess coordination number of the packings increases with the applied strain, indicating that the more a packing is compressed the more stable it becomes.
△ Less
Submitted 24 February, 2014; v1 submitted 28 July, 2013;
originally announced July 2013.
-
Self-learning kinetic Monte Carlo model for arbitrary surface orientations
Authors:
Andreas Latz,
Lothar Brendel,
Dietrich E. Wolf
Abstract:
While the self-learning kinetic Monte Carlo (SLKMC) method enables the calculation of transition rates from a realistic potential, implementations of it were usually limited to one specific surface orientation. An example is the fcc (111) surface in Latz et al. 2012, J. Phys.: Condens. Matter 24, 485005. This work provides an extension by means of detecting the local orientation, and thus allows f…
▽ More
While the self-learning kinetic Monte Carlo (SLKMC) method enables the calculation of transition rates from a realistic potential, implementations of it were usually limited to one specific surface orientation. An example is the fcc (111) surface in Latz et al. 2012, J. Phys.: Condens. Matter 24, 485005. This work provides an extension by means of detecting the local orientation, and thus allows for the accurate simulation of arbitrarily shaped surfaces. We applied the model to the diffusion of Ag monolayer islands and voids on a Ag(111) and Ag(001) surface, as well as the relaxation of a three-dimensional spherical particle.
△ Less
Submitted 5 March, 2013;
originally announced March 2013.
-
Magnetotransport along a boundary: From coherent electron focusing to edge channel transport
Authors:
Thomas Stegmann,
Dietrich E. Wolf,
Axel Lorke
Abstract:
We study theoretically how electrons, coherently injected at one point on the boundary of a two-dimensional electron system, are focused by a perpendicular magnetic field $B$ onto another point on the boundary. Using the non-equilibrium Green's function approach, we calculate the generalized 4-point Hall resistance $R_{xy}$ as a function of B. In weak fields, $R_{xy}$ shows the characteristic equi…
▽ More
We study theoretically how electrons, coherently injected at one point on the boundary of a two-dimensional electron system, are focused by a perpendicular magnetic field $B$ onto another point on the boundary. Using the non-equilibrium Green's function approach, we calculate the generalized 4-point Hall resistance $R_{xy}$ as a function of B. In weak fields, $R_{xy}$ shows the characteristic equidistant peaks observed in the experiment and explained by classical cyclotron motion along the boundary. In strong fields, $R_{xy}$ shows a single extended plateau reflecting the quantum Hall effect. In intermediate fields, we find superimposed upon the lower Hall plateaus anomalous oscillations, which are neither periodic in 1/B (quantum Hall effect) nor in $B$ (classical cyclotron motion). The oscillations are explained by the interference between the occupied edge channels, which causes beatings in $R_{xy}$. In the case of two occupied edge channels, these beatings constitute a new commensurability between the magnetic flux enclosed within the edge channels and the flux quantum. Introducing decoherence and a partially specular boundary shows that this new effect is quite robust.
△ Less
Submitted 27 November, 2013; v1 submitted 25 February, 2013;
originally announced February 2013.
-
A three-dimensional self-learning kinetic Monte Carlo model: application to Ag(111)
Authors:
A. Latz,
L. Brendel,
D. E. Wolf
Abstract:
The reliability of kinetic Monte Carlo (KMC) simulations depends on accurate transition rates. The self-learning KMC method (Trushin et al 2005 Phys. Rev. B 72 115401) combines the accuracy of rates calculated from a realistic potential with the efficiency of a rate catalog, using a pattern recognition scheme. This work expands the original two-dimensional method to three dimensions. The concomita…
▽ More
The reliability of kinetic Monte Carlo (KMC) simulations depends on accurate transition rates. The self-learning KMC method (Trushin et al 2005 Phys. Rev. B 72 115401) combines the accuracy of rates calculated from a realistic potential with the efficiency of a rate catalog, using a pattern recognition scheme. This work expands the original two-dimensional method to three dimensions. The concomitant huge increase in the number of rate calculations on the fly needed can be avoided by setting up an initial database, containing exact activation energies calculated for processes gathered from a simpler KMC model. To provide two representative examples, the model is applied to the diffusion of Ag monolayer islands on Ag(111), and the homoepitaxial growth of Ag on Ag(111) at low temperatures.
△ Less
Submitted 30 December, 2012; v1 submitted 14 September, 2012;
originally announced September 2012.
-
Lattice Expansion in Seamless Bi layer Graphene Constrictions at High Bias
Authors:
Felix Boerrnert,
Amelia Barreiro,
Daniel Wolf,
Mikhail I. Katsnelson,
Bernd Buechner,
Lieven M. K. Vandersypen,
Mark H. Ruemmeli
Abstract:
Our understanding of sp2 carbon nanostructures is still emerging and is important for the development of high performance all carbon devices. For example, in terms of the structural behavior of graphene or bi-layer graphene at high bias, little to nothing is known. To this end we investigated bi-layer graphene constrictions with closed edges (seamless) at high bias using in situ atomic resolution…
▽ More
Our understanding of sp2 carbon nanostructures is still emerging and is important for the development of high performance all carbon devices. For example, in terms of the structural behavior of graphene or bi-layer graphene at high bias, little to nothing is known. To this end we investigated bi-layer graphene constrictions with closed edges (seamless) at high bias using in situ atomic resolution transmission electron microscopy. We directly observe a highly localized anomalously large lattice expansion inside the constriction. Both the current density and lattice expansion increase as the bi-layer graphene constriction narrows. As the constriction width decreases below 10 nm, shortly before failure, the current density rises to 4 \cdot 109 A cm-2 and the constriction exhibits a lattice expansion with a uniaxial component showing an expansion approaching 5 % and an isotropic component showing an expansion exceeding 1 %. The origin of the lattice expansion is hard to fully ascribe to thermal expansion. Impact ionization is a process in which charge carriers transfer from bonding states to antibonding states thus weakening bonds. The altered character of C-C bonds by impact ionization could explain the anomalously large lattice expansion we observe in seamless bi-layer graphene constrictions. Moreover, impact ionization might also contribute to the observed anisotropy in the lattice expansion, although strain is probably the predominant factor.
△ Less
Submitted 10 August, 2012;
originally announced August 2012.
-
Magnetic vortices induced by a moving tip
Authors:
Martin P. Magiera,
Alfred Hucht,
Haye Hinrichsen,
Silvio R. Dahmen,
Dietrich E. Wolf
Abstract:
A two-dimensional easy-plane ferromagnetic substrate, interacting with a dipolar tip which is magnetised perpendicular with respect to the easy plane is studied numerically by solving the Landau-Lifshitz Gilbert equation. Due to the symmetry of the dipolar field of the tip, in addition to the collinear structure a magnetic vortex structure becomes stable. It is robust against excitations caused by…
▽ More
A two-dimensional easy-plane ferromagnetic substrate, interacting with a dipolar tip which is magnetised perpendicular with respect to the easy plane is studied numerically by solving the Landau-Lifshitz Gilbert equation. Due to the symmetry of the dipolar field of the tip, in addition to the collinear structure a magnetic vortex structure becomes stable. It is robust against excitations caused by the motion of the tip. We show that for high excitations the system may perform a transition between the two states. The influence of domain walls, which may also induce this transition, is examined.
△ Less
Submitted 22 January, 2013; v1 submitted 13 July, 2012;
originally announced July 2012.
-
Statistical model for the effects of phase and momentum randomization on electron transport
Authors:
Thomas Stegmann,
Matías Zilly,
Orsolya Ujsághy,
Dietrich E. Wolf
Abstract:
A simple statistical model for the effects of dephasing on electron transport in one-dimensional quantum systems is introduced, which allows to adjust the degree of phase and momentum randomization independently. Hence, the model is able to describe the transport in an intermediate regime between classic and quantum transport. The model is based on Büttiker's approach using fictitious reservoirs f…
▽ More
A simple statistical model for the effects of dephasing on electron transport in one-dimensional quantum systems is introduced, which allows to adjust the degree of phase and momentum randomization independently. Hence, the model is able to describe the transport in an intermediate regime between classic and quantum transport. The model is based on Büttiker's approach using fictitious reservoirs for the dephasing effects. However, in contrast to other models, at the fictitious reservoirs complete phase randomization is assumed, which effectively divides the system into smaller coherent subsystems, and an ensemble average over randomly distributed dephasing reservoirs is calculated. This approach reduces not only the computation time but allows also to gain new insight into system properties. In this way, after deriving an efficient formula for the disorder-averaged resistance of a tight-binding chain, it is shown that the dephasing-driven transition from localized-exponentially to ohmic-linear behavior is not affected by the degree of momentum randomizing dephasing.
△ Less
Submitted 27 July, 2012; v1 submitted 7 June, 2012;
originally announced June 2012.
-
Unilateral interactions in granular packings: A model for the anisotropy modulus
Authors:
M. Reza Shaebani,
Jens Boberski,
Dietrich E. Wolf
Abstract:
Unilateral interparticle interactions have an effect on the elastic response of granular materials due to the opening and closing of contacts during quasi-static shear deformations. A simplified model is presented, for which constitutive relations can be derived. For biaxial deformations the elastic behavior in this model involves three independent elastic moduli: bulk, shear, and anisotropy modul…
▽ More
Unilateral interparticle interactions have an effect on the elastic response of granular materials due to the opening and closing of contacts during quasi-static shear deformations. A simplified model is presented, for which constitutive relations can be derived. For biaxial deformations the elastic behavior in this model involves three independent elastic moduli: bulk, shear, and anisotropy modulus. The bulk and the shear modulus, when scaled by the contact density, are independent of the deformation. However, the magnitude of the anisotropy modulus is proportional to the ratio between shear and volumetric strain. Sufficiently far from the jamming transition, when corrections due to non-affine motion become weak, the theoretical predictions are qualitatively in agreement with simulation results.
△ Less
Submitted 21 May, 2012;
originally announced May 2012.
-
Laser-sintered thin films of doped SiGe nanoparticles
Authors:
Benedikt Stoib,
Tim Langmann,
Sonja Matich,
Tobias Antesberger,
Niklas Stein,
Sebastian Angst,
Nils Petermann,
Roland Schmechel,
Gabi Schierning,
Dietrich E. Wolf,
Hartmut Wiggers,
Martin Stutzmann,
Martin S. Brandt
Abstract:
We present a study of the morphology and the thermoelectric properties of short-pulse laser-sintered (LS) nanoparticle (NP) thin films, consisting of SiGe alloy NPs or composites of Si and Ge NPs. Laser-sintering of spin-coated NP films in vacuum results in a macroporous percolating network with a typical thickness of 300 nm. The Seebeck coefficient is independent of the sintering process and typi…
▽ More
We present a study of the morphology and the thermoelectric properties of short-pulse laser-sintered (LS) nanoparticle (NP) thin films, consisting of SiGe alloy NPs or composites of Si and Ge NPs. Laser-sintering of spin-coated NP films in vacuum results in a macroporous percolating network with a typical thickness of 300 nm. The Seebeck coefficient is independent of the sintering process and typical for degenerate do**. The electrical conductivity of LS films rises with increasing temperature, best described by a power-law and influenced by two-dimensional percolation effects.
△ Less
Submitted 20 January, 2012;
originally announced January 2012.
-
Strongly anisotropic non-equilibrium phase transition in Ising models with friction
Authors:
Sebastian Angst,
Alfred Hucht,
Dietrich E. Wolf
Abstract:
The non-equilibrium phase transition in driven two-dimensional Ising models with two different geometries is investigated using Monte Carlo methods as well as analytical calculations. The models show dissipation through fluctuation induced friction near the critical point. We first consider high driving velocities and demonstrate that both systems are in the same universality class and undergo a s…
▽ More
The non-equilibrium phase transition in driven two-dimensional Ising models with two different geometries is investigated using Monte Carlo methods as well as analytical calculations. The models show dissipation through fluctuation induced friction near the critical point. We first consider high driving velocities and demonstrate that both systems are in the same universality class and undergo a strongly anisotropic non-equilibrium phase transition, with anisotropy exponent θ=3. Within a field theoretical ansatz the simulation results are confirmed. The crossover from Ising to mean field behavior in dependency of system size and driving velocity is analyzed using crossover scaling. It turns out that for all finite velocities the phase transition becomes strongly anisotropic in the thermodynamic limit.
△ Less
Submitted 22 May, 2012; v1 submitted 10 January, 2012;
originally announced January 2012.
-
Decoherence-induced conductivity in the discrete 1D Anderson model: A novel approach to even-order generalized Lyapunov exponents
Authors:
Matías Zilly,
Orsolya Ujsághy,
Marko Woelki,
Dietrich E. Wolf
Abstract:
A recently proposed statistical model for the effects of decoherence on electron transport manifests a decoherence-driven transition from quantum-coherent localized to ohmic behavior when applied to the one-dimensional Anderson model. Here we derive the resistivity in the ohmic case and show that the transition to localized behavior occurs when the coherence length surpasses a value which only dep…
▽ More
A recently proposed statistical model for the effects of decoherence on electron transport manifests a decoherence-driven transition from quantum-coherent localized to ohmic behavior when applied to the one-dimensional Anderson model. Here we derive the resistivity in the ohmic case and show that the transition to localized behavior occurs when the coherence length surpasses a value which only depends on the second-order generalized Lyapunov exponent $ξ^{-1}$. We determine the exact value of $ξ^{-1}$ of an infinite system for arbitrary uncorrelated disorder and electron energy. Likewise all higher even-order generalized Lyapunov exponents can be calculated, as exemplified for fourth order. An approximation for the localization length (inverse standard Lyapunov exponent) is presented, by assuming a log-normal limiting distribution for the dimensionless conductance $T$. This approximation works well in the limit of weak disorder, with the exception of the band edges and the band center.
△ Less
Submitted 17 February, 2012; v1 submitted 25 November, 2011;
originally announced November 2011.
-
Magnetic friction: From Stokes to Coulomb behavior
Authors:
Martin P. Magiera,
Sebastian Angst,
Alfred Hucht,
Dietrich E. Wolf
Abstract:
We demonstrate that in a ferromagnetic substrate, which is continuously driven out of equilibrium by a field moving with constant velocity $v$, at least two types of friction may occur when $v$ goes to zero: The substrate may feel a friction force proportional to $v$ (Stokes friction), if the field changes on a time scale which is longer than the intrinsic relaxation time. On the other hand, the f…
▽ More
We demonstrate that in a ferromagnetic substrate, which is continuously driven out of equilibrium by a field moving with constant velocity $v$, at least two types of friction may occur when $v$ goes to zero: The substrate may feel a friction force proportional to $v$ (Stokes friction), if the field changes on a time scale which is longer than the intrinsic relaxation time. On the other hand, the friction force may become independent of $v$ in the opposite case (Coulomb friction). These observations are analogous to e.g. solid friction. The effect is demonstrated in both, the Ising (one spin dimension) and the Heisenberg model (three spin dimensions), irrespective which kind of dynamics (Metropolis spin-flip dynamics or Landau-Lifshitz-Gilbert precessional dynamics) is used. For both models the limiting case of Coulomb friction can be treated analytically. Furthermore we present an empiric expression reflecting the correct Stokes behavior and therefore yielding the correct cross-over velocity and dissipation.
△ Less
Submitted 10 November, 2011;
originally announced November 2011.