-
HR-EBSD analysis of in situ stable crack growth at the micron scale
Authors:
Abdalrhaman Koko,
Thorsten H. Becker,
Elsiddig Elmukashfi,
Nicola M. Pugno,
Angus J. Wilkinson,
T. James Marrow
Abstract:
Understanding the local fracture resistance of microstructural features. such as brittle inclusions, coatings, and interfaces at the microscale under complex loading conditions is critical for microstructure-informed design of materials. In this study, a novel approach has been formulated to decompose the J-integral evaluation of the elastic energy release rate to the three-dimensional stress inte…
▽ More
Understanding the local fracture resistance of microstructural features. such as brittle inclusions, coatings, and interfaces at the microscale under complex loading conditions is critical for microstructure-informed design of materials. In this study, a novel approach has been formulated to decompose the J-integral evaluation of the elastic energy release rate to the three-dimensional stress intensity factors directly from experimental measurements of the elastic deformation gradient tensors of the crack field by in situ high (angular) resolution electron backscatter diffraction (HR-EBSD). An exemplar study is presented of a quasi-static crack, inclined to the observed surface, propagating on low index {hkl} planes in a (001) single crystal silicon wafer.
△ Less
Submitted 14 September, 2022; v1 submitted 21 June, 2022;
originally announced June 2022.
-
An iterative method for reference pattern selection in high resolution electron backscatter diffraction (HR-EBSD)
Authors:
Abdalrhaman Koko,
Vivian Tong,
Angus J. Wilkinson,
T. James Marrow
Abstract:
For high (angular) resolution electron backscatter diffraction (HR-EBSD), the selection of a reference diffraction pattern (EBSP0) significantly affects the precision of the calculated strain and rotation maps. This effect was demonstrated in plastically deformed body-centred cubic and face-centred cubic ductile metals (ferrite and austenite grains in duplex stainless steel) and brittle single-cry…
▽ More
For high (angular) resolution electron backscatter diffraction (HR-EBSD), the selection of a reference diffraction pattern (EBSP0) significantly affects the precision of the calculated strain and rotation maps. This effect was demonstrated in plastically deformed body-centred cubic and face-centred cubic ductile metals (ferrite and austenite grains in duplex stainless steel) and brittle single-crystal silicon, which showed that the effect is not only limited to measurement magnitude but also spatial distribution. An empirical relationship was then identified between the cross-correlation parameter and angular error, which was used in an iterative algorithm to identify the optimal reference pattern that maximises the precision of HR-EBSD.
△ Less
Submitted 16 January, 2023; v1 submitted 21 June, 2022;
originally announced June 2022.
-
Macroscopic analysis of time dependent plasticity in Ti alloys
Authors:
Yi Xiong,
Phani S. Karamched,
Chi-Toan Nguyen,
David M. Collins,
Christopher M. Magazzeni,
Edmund Tarleton,
Angus J. Wilkinson
Abstract:
Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing mechanisms of time dependent plasticity behaviour of Ti at low temperatures. Here, stress relaxation tests were performed at four different temperatures on three major…
▽ More
Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing mechanisms of time dependent plasticity behaviour of Ti at low temperatures. Here, stress relaxation tests were performed at four different temperatures on three major alloy systems: commercially pure titanium (two alloys with different oxygen content), Ti-6Al-4V (two microstructures with differing beta phase fractions) and Ti-6Al-2Sn-4Zr-xMo (two alloys with different Mo content x= 2 or 6, and portion of beta phase). Key parameters controlling the time dependent plasticity were determined as a function of temperature. Both activation volume and energy were found to increase with temperature in all six alloys. It was found that the dwell fatigue effect is more significant by oxygen alloying but is suppressed by the addition of Mo. The presence of the beta phase did not strongly affect the dwell fatigue, however, it was suppressed at high temperature due to the low strain rate and strain rate sensitivity.
△ Less
Submitted 12 April, 2022;
originally announced April 2022.
-
Bayesian Optimised Collection Strategies for Fatigue Strength Testing
Authors:
Christopher M Magazzeni,
Rory Rose,
Chris Gearhart,
Jicheng Gong,
Angus J Wilkinson
Abstract:
A statistical framework is presented enabling optimal sampling and analysis of constant life fatigue data. Protocols using Bayesian maximum entropy sampling are built based on conventional staircase and stress step methods, reducing the requirement of prior knowledge for data collection. The Bayesian Staircase method shows improved parameter estimation efficiency, and the Bayesian Stress Step meth…
▽ More
A statistical framework is presented enabling optimal sampling and analysis of constant life fatigue data. Protocols using Bayesian maximum entropy sampling are built based on conventional staircase and stress step methods, reducing the requirement of prior knowledge for data collection. The Bayesian Staircase method shows improved parameter estimation efficiency, and the Bayesian Stress Step method shows equal accuracy to the standard method at larger step size allowing experimentalists to lessen concerns of loading history. Statistical methods for determining model suitability are shown, highlighting the influence of protocol. Experimental validation is performed, showing the applicability of the methods in laboratory testing.
△ Less
Submitted 21 September, 2022; v1 submitted 6 July, 2021;
originally announced July 2021.
-
Cold dwell behaviour of Ti$_6$Al alloy: Understanding load shedding using digital image correlation and crystal plasticity simulations
Authors:
Yi Xiong,
Nicolo Grilli,
Phani S. Karamched,
Bo-Shiuan Li,
Edmund Tarleton,
Angus J. Wilkinson
Abstract:
Digital image correlation (DIC) and crystal plasticity simulation were utilised to study cold dwell behaviour in a coarse grain Ti-6Al alloy at 3 different temperatures up to 230 C. Strains extracted from large volume grains were measured during creep by DIC and were used to calibrate the crystal plasticity model. The values of critical resolved shear stresses (CRSS) of the two main slip systems (…
▽ More
Digital image correlation (DIC) and crystal plasticity simulation were utilised to study cold dwell behaviour in a coarse grain Ti-6Al alloy at 3 different temperatures up to 230 C. Strains extracted from large volume grains were measured during creep by DIC and were used to calibrate the crystal plasticity model. The values of critical resolved shear stresses (CRSS) of the two main slip systems (basal and prismatic) were determined as a function of temperature. Stress along paths across the boundaries of two grain pairs, (1) a `rogue' grain pair and (2) a `non-rogue' grain pair, were determined at different temperatures. Load shedding was observed in the `rogue' grain pair, where a stress increment during the creep period was found in the `hard' grain. At elevated temperatures, 120 C was found to be the worst-case scenario as the stress difference at the grain boundaries of these two grain pairs were found to be the largest among the three temperatures. This can be attributed to the fact that the strain rate sensitivity of both prismatic and basal slip systems is at its greatest in this worst-case scenario temperature.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
High resolution electron backscatter diffraction study on the heterogeneities of tetragonal distortion in Fe-C martensite at the microstructural scale
Authors:
Tomohito Tanaka,
Nozomu Nakamura,
Angus J. Wilkinson
Abstract:
The spatial variation in martensite tetragonality (c/a ratio) in Fe-0.77C (wt.%) alloy was investigated by means of pattern matching of electron backscatter diffraction patterns combined with high angular resolution electron backscatter diffraction analysis. It was found that the c/a ratio varies within a martensite block and between blocks. The c/a variation within a block is particularly evident…
▽ More
The spatial variation in martensite tetragonality (c/a ratio) in Fe-0.77C (wt.%) alloy was investigated by means of pattern matching of electron backscatter diffraction patterns combined with high angular resolution electron backscatter diffraction analysis. It was found that the c/a ratio varies within a martensite block and between blocks. The c/a variation within a block is particularly evident in the vicinity of grain boundaries and shear strains are also present in addition to tetragonal distortion. The c/a variation between blocks is more apparent than that within a block. The lattice parameter frequency profile predicted by our approach well matches with the X-ray diffraction profile from the same material by assuming reasonable residual strain acting on a- and b-axes. The heterogeneities of the crystal distortion are brought by a decrease and scatter in solid solution carbon and in carbon ordering as a result of the martensite transformation sequence as well as heterogeneous residual strain.
△ Less
Submitted 1 December, 2020;
originally announced December 2020.
-
An in-situ synchrotron diffraction study of stress relaxation in titanium: Effect of temperature and oxygen on cold dwell fatigue
Authors:
Yi Xiong,
Phani S. Karamched,
Chi-Toan Nguyen,
David M. Collins,
Nicolo Grilli,
Christopher M. Magazzeni,
Edmund Tarleton,
Angus J. Wilkinson
Abstract:
There is a long-standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains favourably oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying…
▽ More
There is a long-standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains favourably oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to understand the complex cold dwell fatigue problem. Knowing the effect of operating temperature and oxygen content on cold dwell fatigue will be beneficial for future alloy design to address this problem. In this work, synchrotron X-ray diffraction during stress relaxation experiments was used to characterise the time dependent plastic behaviour of two commercially pure titanium samples (grade 1 and grade 4) with different oxygen content at 4 different temperatures (room temperature, 75C, 145C and 250C). Lattice strains were measured by tracking the diffraction peak shift from multiple crystallographic plane families (21 diffraction rings) as a function of their orientation with respect to the loading direction. Critical resolved shear stress, activation energy and activation volume were established for both prismatic and basal slip as a function of temperature and oxygen content by fitting a crystal plasticity finite element model to the lattice strain relaxation responses measured along the loading axis for five strong reflections. Higher strain rate sensitivity was found to lead to higher plasticity during cold dwell.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
On the Brittle-to-Ductile Transition of the As-cast TiVNbTa Refractory High-entropy Alloy
Authors:
Robert James Scales,
David Edward John Armstrong,
Angus J Wilkinson,
Bo-Shiuan Li
Abstract:
The fracture properties of as-cast TiVNbTa, a refractory high-entropy alloy (RHEA), were investigated using four-point bending tests from -139C to 20C under a strain-rate of 10-3 s-1. From those tests and fractography, the conditional fracture toughness values and the brittle-to-ductile transition temperature were obtained. The brittle-to-ductile transition temperature was between -47C to -27C, wh…
▽ More
The fracture properties of as-cast TiVNbTa, a refractory high-entropy alloy (RHEA), were investigated using four-point bending tests from -139C to 20C under a strain-rate of 10-3 s-1. From those tests and fractography, the conditional fracture toughness values and the brittle-to-ductile transition temperature were obtained. The brittle-to-ductile transition temperature was between -47C to -27C, which gives an estimated activation energy value of 0.52+-0.09 eV for the alloy. This study provides a preliminary understanding of the nature of dislocation motion in a relatively ductile RHEA.
△ Less
Submitted 22 October, 2020;
originally announced October 2020.
-
Nanoindentation in multi-modal map combinations: A Correlative Approach to Local Mechanical Property Assessment
Authors:
C. M. Magazzeni,
H. M. Gardner,
I. Howe,
P. Gopon,
J. C. Waite,
D. Rugg,
D. E. J. Armstrong,
A. J. Wilkinson
Abstract:
A method is presented for the registration and correlation of intrinsic property maps of materials, including data from nanoindentation hardness, Electron Back-Scattered Diffraction (EBSD), Electron Micro-Probe Analysis (EPMA). This highly spatially resolved method allows for the study of micron-scale microstructural features, and has the capability to rapidly extract correlations between multiple…
▽ More
A method is presented for the registration and correlation of intrinsic property maps of materials, including data from nanoindentation hardness, Electron Back-Scattered Diffraction (EBSD), Electron Micro-Probe Analysis (EPMA). This highly spatially resolved method allows for the study of micron-scale microstructural features, and has the capability to rapidly extract correlations between multiple features of interest from datasets containing thousands of datapoints. Two case studies are presented in commercially pure (CP) titanium: in the first instance, the effect of crystal anisotropy on measured hardness and, in the second instance, the effect of an oxygen diffusion layer on hardness. The independently collected property maps are registered us-ing affine geometric transformations and are interpolated to allow for direct correlation. The results show strong agreement with trends observed in the literature, as well as providing a large dataset to facilitate future statistical analysis of microstructure-dependent mechanisms.
△ Less
Submitted 4 January, 2021; v1 submitted 27 August, 2020;
originally announced August 2020.
-
Dislocation interactions in olivine control postseismic creep of the upper mantle
Authors:
David Wallis,
Lars N. Hansen,
Angus J. Wilkinson,
Ricardo A. Lebensohn
Abstract:
Changes in stress applied to mantle rocks, such as those imposed by earthquakes, induce a period of evolution in viscosity and microstructure. This transient creep is often modelled based on stress transfer among slip systems due to grain interactions. However, recent experiments have demonstrated that the intragranular accumulation of stresses among dislocations is the dominant cause of strain ha…
▽ More
Changes in stress applied to mantle rocks, such as those imposed by earthquakes, induce a period of evolution in viscosity and microstructure. This transient creep is often modelled based on stress transfer among slip systems due to grain interactions. However, recent experiments have demonstrated that the intragranular accumulation of stresses among dislocations is the dominant cause of strain hardening in olivine at low temperatures, raising the question of whether the same process contributes to transient creep at higher temperatures. Here, we demonstrate that olivine samples deformed at 25°C or 1150 to 1250°C both contain stress heterogeneities of ~1 GPa that are imparted by dislocations and have correlation lengths of ~1 micrometre. The similar stress distributions formed in both temperature regimes indicate that accumulation of stresses among dislocations also provides a contribution to transient creep at high temperatures. The results motivate a new generation of models that capture these intragranular processes and may refine predictions of evolving mantle viscosity over the earthquake cycle.
△ Less
Submitted 9 June, 2020;
originally announced June 2020.
-
Grain Boundary Serration in Nickel Alloy Inconel 600: Quantification and Mechanisms
Authors:
Yuanbo T. Tang,
Phani Karamched,
Junliang Liu,
Jack C. Haley,
Roger C. Reed,
Angus J. Wilkinson
Abstract:
The serration of grain boundaries in Inconel 600 caused by heat treatment is studied systematically. A new method based on Fourier transforms is used to analyse the multiple wave-like character of the serrated grain boundaries. A new metric -- the serration index -- is devised and utilised to quantify the degree of serration and more generally to distinguish objectively between serrated and non-se…
▽ More
The serration of grain boundaries in Inconel 600 caused by heat treatment is studied systematically. A new method based on Fourier transforms is used to analyse the multiple wave-like character of the serrated grain boundaries. A new metric -- the serration index -- is devised and utilised to quantify the degree of serration and more generally to distinguish objectively between serrated and non-serrated boundaries. By considering the variation of the serration index with processing parameters, a causal relationship between degree of serration and solution treatment/cooling rate is elucidated. Processing maps for the degree of serration are presented. Two distinct formation mechanisms arise which rely upon grain boundary interaction with carbides: (i) Zener-type dragging which hinders grain boundary migration and (ii) a faceted carbide growth-induced serration.
△ Less
Submitted 27 March, 2020;
originally announced March 2020.
-
Cold Creep of Titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations
Authors:
Yi Xiong,
Phani Karamched,
Chi-Toan Nguyen,
David M Collins,
Christopher M Magazzeni,
Edmund Tarleton,
Angus J Wilkinson
Abstract:
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time…
▽ More
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to successfully predicting the complex cold dwell fatigue problem. This work uses a novel approach of in situ synchrotron X-ray diffraction during stress relaxation tests, to quantify the time dependent plasticity. Measured lattice strains from multiple lattice families (21 diffraction rings) were compared with simulated lattice strains from crystal plasticity finite element (CPFE) simulations. The prism slip parameters were found to show stronger strain rate sensitivity compared to basal slip, and this has a significant effect on stress redistribution to hard grain orientations during cold creep.
△ Less
Submitted 24 August, 2020; v1 submitted 3 March, 2020;
originally announced March 2020.
-
Tetragonality of Fe-C martensite -- a pattern matching electron backscatter diffraction analysis compared to X-ray diffraction
Authors:
Tomohito Tanaka,
Naoki Maruyama,
Nozomu Nakamura,
Angus J Wilkinson
Abstract:
Measurements of the local tetragonality in Fe-C martensite at microstructural length-scale through pattern matching of electron backscatter diffraction patterns (EBSPs) and careful calibration of detector geometry are presented. It is found that the local tetragonality varies within the complex microstructure by several per cent at largest and that the scatter in the axial ratio is increased at hi…
▽ More
Measurements of the local tetragonality in Fe-C martensite at microstructural length-scale through pattern matching of electron backscatter diffraction patterns (EBSPs) and careful calibration of detector geometry are presented. It is found that the local tetragonality varies within the complex microstructure by several per cent at largest and that the scatter in the axial ratio is increased at higher nominal carbon content. At some analysis points the local crystal structure can be regarded as lower symmetry than simple body centred tetragonal. A linear relation between the nominal carbon content and averaged local tetragonality measured by EBSD is also obtained, although the averaged axial ratio is slightly below that obtained from more classical X-ray diffraction measurements.
△ Less
Submitted 8 June, 2020; v1 submitted 4 February, 2020;
originally announced February 2020.
-
Dislocation interactions during low-temperature plasticity of olivine strengthen the lithospheric mantle
Authors:
David Wallis,
Lars. N. Hansen,
Kathryn M. Kumamoto,
Christopher A. Thom,
Oliver Plümper,
Markus Ohl,
William B. Durham,
David L. Goldsby,
David E. J. Armstrong,
Cameron D. Meyers,
Rellie Goddard,
Jessica M. Warren,
Thomas Breithaupt,
Martyn R. Drury,
Angus J. Wilkinson
Abstract:
The strength of the lithosphere is typically modelled based on constitutive equations for steady-state flow. However, models of lithospheric flexure reveal differences in lithospheric strength that are difficult to reconcile based on such flow laws. Recent rheological data from low-temperature deformation experiments on olivine suggest that this discrepancy may be largely explained by strain harde…
▽ More
The strength of the lithosphere is typically modelled based on constitutive equations for steady-state flow. However, models of lithospheric flexure reveal differences in lithospheric strength that are difficult to reconcile based on such flow laws. Recent rheological data from low-temperature deformation experiments on olivine suggest that this discrepancy may be largely explained by strain hardening. Details of the mechanical data, specifically the effects of temperature-independent back stresses stored in the samples, indicate that strain hardening in olivine occurs primarily due to long-range elastic interactions between dislocations. These interpretations provided the basis for a new flow law that incorporates hardening by development of back stress. Here, we test this hypothesis by examining the microstructures of olivine samples deformed plastically at room temperature either in a deformation-DIA apparatus at differential stresses of < 4.3 GPa or in a nanoindenter at applied contact stresses of > 10.2 GPa. High-angular resolution electron backscatter diffraction maps reveal the presence of geometrically necessary dislocations with densities commonly above 10$^{14}$ m$^{-2}$ and intragranular heterogeneities in residual stress on the order of 1 GPa in both sets of samples. Scanning transmission electron micrographs reveal straight dislocations aligned along slip bands and interacting with dislocations of other types that act as obstacles. The stress heterogeneities and accumulations of dislocations along their slip planes are consistent with strain hardening resulting from long-range back-stresses acting between dislocations. These results corroborate the mechanical data in supporting the form of the new flow law for low-temperature plasticity and provide new microstructural criteria for identifying the operation of this deformation mechanism in natural samples.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.
-
Dislocation density distribution at slip band-grain boundary intersections
Authors:
Yi Guo,
David M. Collins,
Edmund Tarleton,
Felix Hofmann,
Angus J. Wilkinson,
T. Ben Britton
Abstract:
We study the mechanisms of slip transfer at a grain boundary, in titanium, using Differential Aperture X-ray Laue Micro-diffraction (DAXM). This 3D characterization tool enables measurement of the full (9-component) Nye lattice curvature tensor and calculation of the density of geometrically necessary dislocations (GNDs). We observe dislocation pile-ups at a grain boundary, as the neighbor grain p…
▽ More
We study the mechanisms of slip transfer at a grain boundary, in titanium, using Differential Aperture X-ray Laue Micro-diffraction (DAXM). This 3D characterization tool enables measurement of the full (9-component) Nye lattice curvature tensor and calculation of the density of geometrically necessary dislocations (GNDs). We observe dislocation pile-ups at a grain boundary, as the neighbor grain prohibits easy passage for dislocation transmission. This incompatibility results in local micro-plasticity within the slip** grain, near to where the slip planes intersect the grain boundary, and we observe bands of GNDs lying near the grain boundary. We observe that the distribution of GNDs can be significantly influenced by the formation of grain boundary ledges that serve as secondary dislocation sources. This observation highlights the non-continuum nature of polycrystal deformation and helps us understand the higher order complexity of grain boundary characteristics.
△ Less
Submitted 6 September, 2019; v1 submitted 2 September, 2019;
originally announced September 2019.
-
Warren-Averbach line broadening analysis from a time of flight neutron diffractometer
Authors:
David M. Collins,
Angus J. Wilkinson,
Richard I. Todd
Abstract:
The well known Warren-Averbach theory of diffraction line profile broadening is shown to be applicable to time of flight data obtained from a neutron spallation source. Without modification, the method is applied to two very different examples; a cold worked ferritic steel and a thermally stressed alumina-30% SiC composite. Values of root mean square strains averaged over a range of lengths for th…
▽ More
The well known Warren-Averbach theory of diffraction line profile broadening is shown to be applicable to time of flight data obtained from a neutron spallation source. Without modification, the method is applied to two very different examples; a cold worked ferritic steel and a thermally stressed alumina-30% SiC composite. Values of root mean square strains averaged over a range of lengths for the ferritic steel were used to estimate dislocation densities; values were found to be in good agreement with geometrically necessary dislocation densities independently measured from similarly orientated grains measured from electron backscatter diffraction analysis. An analytical model for the ceramic is described to validate the estimate of root mean square strain.
△ Less
Submitted 28 July, 2019;
originally announced July 2019.
-
High-angular resolution electron backscatter diffraction as a new tool for map** lattice distortion in geological minerals
Authors:
David Wallis,
Lars N. Hansen,
T. Ben Britton,
Angus J. Wilkinson
Abstract:
Analysis of distortions of the crystal lattice within individual mineral grains is central to the investigation of microscale processes that control and record tectonic events. These distortions are generally combinations of lattice rotations and elastic strains, but a lack of suitable observational techniques has prevented these components being mapped simultaneously and routinely in earth scienc…
▽ More
Analysis of distortions of the crystal lattice within individual mineral grains is central to the investigation of microscale processes that control and record tectonic events. These distortions are generally combinations of lattice rotations and elastic strains, but a lack of suitable observational techniques has prevented these components being mapped simultaneously and routinely in earth science laboratories. However, the technique of high-angular resolution electron backscatter diffraction (HR-EBSD) provides the opportunity to simultaneously map lattice rotations and elastic strains with exceptional precision, on the order of 0.01 degree for rotations and 10-4 in strain, using a scanning electron microscope. Importantly, these rotations and lattice strains relate to densities of geometrically necessary dislocations and residual stresses. Recent works have begun to apply and adapt HR-EBSD to geological minerals, highlighting the potential of the technique to provide new insights into the microphysics of rock deformation. Therefore, the purpose of this overview is to provide a summary of the technique, to identify caveats and targets for further development, and to suggest areas where it offers potential for major advances. In particular, HREBSD is well suited to characterising the roles of different dislocation types during crystal plastic deformation and to map** heterogeneous internal stress fields associated with specific deformation mechanisms/microstructures or changes in temperature, confining pressure, or applied deviatoric stress. These capabilities make HR-EBSD a particularly powerful new technique for analysing the microstructures of deformed geological materials.
△ Less
Submitted 31 May, 2019; v1 submitted 17 April, 2019;
originally announced April 2019.
-
Pattern Matching Analysis of Electron Backscatter Diffraction Patterns for Pattern Centre, Crystal Orientation and Absolute Elastic Strain Determination: Accuracy and Precision Assessment
Authors:
Tomohito Tanaka,
Angus J. Wilkinson
Abstract:
Pattern matching between target electron backscatter patterns (EBSPs) and dynamically simulated EBSPs was used to determine the pattern centre (PC) and crystal orientation, using a global optimisation algorithm. Systematic analysis of error and precision with this approach was carried out using dynamically simulated target EBSPs with known PC positions and orientations. Results showed that the err…
▽ More
Pattern matching between target electron backscatter patterns (EBSPs) and dynamically simulated EBSPs was used to determine the pattern centre (PC) and crystal orientation, using a global optimisation algorithm. Systematic analysis of error and precision with this approach was carried out using dynamically simulated target EBSPs with known PC positions and orientations. Results showed that the error in determining the PC and orientation was < 10$^{-5}$ of pattern width and < 0.01° respectively for the undistorted full resolution images (956x956 pixels). The introduction of noise, optical distortion and image binning was shown to have some influence on the error although better angular resolution was achieved with the pattern matching than using conventional Hough transform-based analysis. The accuracy of PC determination for the experimental case was explored using the High Resolution (HR-) EBSD method but using dynamically simulated EBSP as the reference pattern. This was demonstrated through a sample rotation experiment and strain analysis around an indent in interstitial free steel.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
Forescattered electron imaging of nanoparticles in a scanning electron microscopy
Authors:
Junliang Liu,
Sergio Lozano-Perez,
Phani Karamched,
Jennifer Holter,
Angus J. Wilkinson,
Chris R. M. Grovenor
Abstract:
In this study, we have used a Zr-Nb alloy containing well-defined nano-precipitates as a model material in which to study imaging contrast inversions (atomic number or diffraction contrast) observed with the forescattered electron imaging system, ARGUSTM, in a scanning electron microscope (SEM) when imaging a thin foil in a transmission geometry. The study is based on Monte Carlo simulations and a…
▽ More
In this study, we have used a Zr-Nb alloy containing well-defined nano-precipitates as a model material in which to study imaging contrast inversions (atomic number or diffraction contrast) observed with the forescattered electron imaging system, ARGUSTM, in a scanning electron microscope (SEM) when imaging a thin foil in a transmission geometry. The study is based on Monte Carlo simulations and analysis of micrographs experimentally acquired under different imaging conditions. Based on the results, imaging conditions that enhance atomic number or diffraction contrast have been proposed. Data acquired from the ARGUSTM imaging system in SEM has also been compared with results from standard transmission electron microscopy and scanning transmission electron microscopy imaging of the same material. These results demonstrate the capability of the ARGUSTM system to investigate microstructures in nano-scale materials.
△ Less
Submitted 11 April, 2019;
originally announced April 2019.
-
On the depth resolution of transmission Kikuchi diffraction (TKD) analysis
Authors:
Junliang Liu,
Sergio Lozano-Perez,
Angus J. Wilkinson,
Chris R. M. Grovenor
Abstract:
In this paper, we have analysed the depth resolution that can be achieved by on-axis transmission Kikuchi diffraction (TKD) using a Zr-Nb alloy. The results indicate that the signals contributing to detectable Kikuchi bands originate from a depth of approximately the mean free path of thermal diffuse scattering (lambdaTDS) from the bottom surface of a thin foil sample. This existing surface sensit…
▽ More
In this paper, we have analysed the depth resolution that can be achieved by on-axis transmission Kikuchi diffraction (TKD) using a Zr-Nb alloy. The results indicate that the signals contributing to detectable Kikuchi bands originate from a depth of approximately the mean free path of thermal diffuse scattering (lambdaTDS) from the bottom surface of a thin foil sample. This existing surface sensitivity can thus lead to the observation of different grain structures when opposite sides of a nano-crystalline foil are facing the incident electron beam. These results also provide a guideline for the ideal sample thickness for TKD analysis of 6lambdaTDS, or 21 times the elastic scattering mean free path (lambdaMFP) for samples of high crystal symmetry. For samples of lower symmetry, a smaller thickness 3lambdaTDS, or 10lambdaMFP is suggested.
△ Less
Submitted 8 April, 2019;
originally announced April 2019.
-
Map** the full lattice strain tensor of a single dislocation by High Angular Resolution Transmission Kikuchi Diffraction (HR-TKD)
Authors:
Hongbing Yu,
Junliang Liu,
Phani Karamched,
Angus J. Wilkinson,
Felix Hofmann
Abstract:
The full lattice strain tensor and lattice rotations induced by a dislocation in pure tungsten were mapped using high-resolution transmission Kikuchi diffraction (HR-TKD) in a SEM. The HR-TKD measurement agrees very well with a forward calculation using an elastically isotropic model of the dislocation and its Burgers vector. Our results demonstrate that the spatial and angular resolution of HR-TK…
▽ More
The full lattice strain tensor and lattice rotations induced by a dislocation in pure tungsten were mapped using high-resolution transmission Kikuchi diffraction (HR-TKD) in a SEM. The HR-TKD measurement agrees very well with a forward calculation using an elastically isotropic model of the dislocation and its Burgers vector. Our results demonstrate that the spatial and angular resolution of HR-TKD in SEM is sufficiently high to resolve the details of lattice distortions near individual dislocations. This capability opens a number of new interesting opportunities, for example determining the Burgers vector of an unknown dislocation in a fast and straightforward way.
△ Less
Submitted 29 August, 2018;
originally announced August 2018.
-
Applications of Multivariate Statistical Methods and Simulation Libraries to Analysis of Electron Backscatter Diffraction and Transmission Kikuchi Diffraction Datasets
Authors:
Angus J Wilkinson,
David M Collins,
Yevhen Zayachuk,
Rajesh Korla,
Arantxa Vilalta-Clemente
Abstract:
Multivariate statistical methods are widely used throughout the sciences, including microscopy, however, their utilisation for analysis of electron backscatter diffraction (EBSD) data has not been adequately explored. The basic aim of most EBSD analysis is to segment the spatial domain to reveal and quantify the microstructure, and links this to knowledge of the crystallography (eg crystal phase,…
▽ More
Multivariate statistical methods are widely used throughout the sciences, including microscopy, however, their utilisation for analysis of electron backscatter diffraction (EBSD) data has not been adequately explored. The basic aim of most EBSD analysis is to segment the spatial domain to reveal and quantify the microstructure, and links this to knowledge of the crystallography (eg crystal phase, orientation) within each segmented region. Two analysis strategies have been explored; principal component analysis (PCA) and k-means clustering. The intensity at individual (binned) pixels on the detector were used as the variables defining the multidimensional space in which each pattern in the map generates a single discrete point. PCA analysis alone did not work well but rotating factors to the VARIMAX solution did. K-means clustering also successfully segmented the data but was computational more expensive. The characteristic patterns produced by either VARIMAX or k-means clustering enhance weak patterns, remove pattern overlap, and allow subtle effects from polarity to be distinguished. Combining multivariate statistical analysis (MSA) approaches with template matching to simulation libraries can significantly reduce computational demand as the number of patterns to be matched is drastically reduced. Both template matching and MSA approaches may augment existing analysis methods but will not replace them in the majority of applications.
△ Less
Submitted 16 September, 2018; v1 submitted 6 June, 2018;
originally announced June 2018.
