-
Suppression of flux jumps in high-$J_c$ Nb$_3$Sn conductors by ferromagnetic layer
Authors:
Cun Xue,
Kai-Wei Cao,
Tian He,
Chong Wei,
Wei Liu,
Jun-Yi Ge
Abstract:
Flux jumps observed in high-$J_c$ Nb$_3$Sn conductors are urgent problems to construct high field superconducting magnets. The low-field instabilities usually reduce the current-carrying capability and thus cause the premature quench of Nb$_3$Sn coils at low magnetic field. In this paper, we explore suppressing the flux jumps by ferromagnetic (FM) layer. Firstly, we experimentally and theoreticall…
▽ More
Flux jumps observed in high-$J_c$ Nb$_3$Sn conductors are urgent problems to construct high field superconducting magnets. The low-field instabilities usually reduce the current-carrying capability and thus cause the premature quench of Nb$_3$Sn coils at low magnetic field. In this paper, we explore suppressing the flux jumps by ferromagnetic (FM) layer. Firstly, we experimentally and theoretically investigate the flux jumps of Nb$_3$Sn/FM hybrid wires exposed to a magnetic field loop with constant swee** rate. Comparing with bare Nb$_3$Sn and Nb$_3$Sn/Cu wires, we reveal two underlying mechanisms that the suppression of flux jumps is mainly attributed to the thermal effect of FM layer for the case of lower swee** rate, whereas both thermal and electromagnetic effects play a crucial role for the case of higher swee** rate. Furthermore, we explore the flux jumps of Nb$_3$Sn/FM hybrid wires exposed to AC magnetic fields with amplitude $B_{a0}$ and frequency $\rmω$. We build up the phase diagrams of flux jumps in the plane $\rmω$-$B_{a0}$ for bare Nb$_{3}$Sn wire, Nb$_{3}$Sn/Cu wire and Nb$_{3}$Sn/FM wire, respectively. We stress that the region of flux jumps of Nb$_{3}$Sn/FM wire is much smaller than the other two wires, which indicates that the Nb$_{3}$Sn/FM wire has significant advantage over merely increasing the heat capacity. The findings shed light on suppression of the flux jumps by utilizing FM materials, which is useful for develo** new type of high-$J_c$ Nb$_{3}$Sn conductors.
△ Less
Submitted 4 June, 2024; v1 submitted 10 March, 2024;
originally announced March 2024.
-
Hometronics: Accessible production of graphene suspensions for health sensing applications using only household items
Authors:
Adel K. A. Aljarid,
Jasper Winder,
Cencen Wei,
Arvind Venkatraman,
Oliver Tomes,
Aaron Soul,
Dimitrios G. Papageorgiou,
Matthias E. Möbius,
Conor S. Boland
Abstract:
Nanoscience at times can seem out of reach to the develo** world and the general public, with much of the equipment expensive and knowledge seemingly esoteric to nonexperts. Using only cheap, everyday household items, accessible research with real applications can be shown. Here, graphene suspensions were produced using pencil lead, tap water, kitchen appliances, soaps and coffee filters, with a…
▽ More
Nanoscience at times can seem out of reach to the develo** world and the general public, with much of the equipment expensive and knowledge seemingly esoteric to nonexperts. Using only cheap, everyday household items, accessible research with real applications can be shown. Here, graphene suspensions were produced using pencil lead, tap water, kitchen appliances, soaps and coffee filters, with a childrens glue based graphene nanocomposite for highly sensitive pulse measurements demonstrated.
△ Less
Submitted 27 January, 2024;
originally announced January 2024.
-
Unveiling chiral states in the XXZ chain: Finite-size scaling probing symmetry-enriched $c=1$ conformal field theories
Authors:
Chenan Wei,
Vagharsh V. Mkhitaryan,
Tigran A. Sedrakyan
Abstract:
We study the low-energy properties of the one-dimensional spin-1/2 XXZ chain with time-reversal symmetry-breaking pseudo-scalar chiral interaction and propose a phase diagram for the model. In the integrable case of the isotropic Heisenberg model with the chiral interaction, we employ the thermodynamic Bethe ansatz to find "chiralization", the response of the ground state versus the strength of th…
▽ More
We study the low-energy properties of the one-dimensional spin-1/2 XXZ chain with time-reversal symmetry-breaking pseudo-scalar chiral interaction and propose a phase diagram for the model. In the integrable case of the isotropic Heisenberg model with the chiral interaction, we employ the thermodynamic Bethe ansatz to find "chiralization", the response of the ground state versus the strength of the pseudo-scalar chiral interaction of a chiral Heisenberg chain. Unlike the magnetization case, the chirality of the ground state remains zero until the transition point corresponding to critical coupling $α_c=2J/π$ with $J$ being the antiferromagnetic spin-exchange interaction. The central-charge $c=1$ conformal field theories (CFTs) describe the two phases with zero and finite chirality. We show for this particular case and conjecture more generally for similar phase transitions that the difference between two emergent CFTs with identical central charges lies in the symmetry of their ground state (lightest weight) primary fields, i.e., the two phases are symmetry-enriched CFTs. At finite but small temperatures, the non-chiral Heisenberg phase acquires a finite chirality that scales with the temperature quadratically. We show that the finite-size effect around the transition point probes the transition.
△ Less
Submitted 20 June, 2024; v1 submitted 27 December, 2023;
originally announced December 2023.
-
BN-embedded monolayer graphene with tunable electronic and topological properties
Authors:
Chih-Piao Chuu,
Wei-En Tseng,
Kuan-Hung Liu,
Ching-Ming Wei,
Mei-Yin Chou
Abstract:
Finding an effective and controllable way to create a sizable energy gap in graphene-based systems has been a challenging topic of intensive research. We propose that the hybrid of boron nitride and graphene (h-BNC) at low BN do** serves as an ideal platform for band-gap engineering and valleytronic applications. We report a systematic first-principles study of the atomic configurations and band…
▽ More
Finding an effective and controllable way to create a sizable energy gap in graphene-based systems has been a challenging topic of intensive research. We propose that the hybrid of boron nitride and graphene (h-BNC) at low BN do** serves as an ideal platform for band-gap engineering and valleytronic applications. We report a systematic first-principles study of the atomic configurations and band gap opening for energetically favorable BN patches embedded in graphene. Based on first-principles calculations, we construct a tight-binding model to simulate general do** configurations in large supercells. Unexpectedly, the calculations find a linear dependence of the band gap on the effective BN concentration at low do**, arising from an induced effective on-site energy difference at the two C sublattices as they are substituted by B and N dopants alternately. The significant and tunable band gap of a few hundred meVs, with preserved topological properties of graphene and feasible sample preparation in the laboratory, presents great opportunities to realize valley physics applications in graphene systems at room temperature.
△ Less
Submitted 30 November, 2023;
originally announced November 2023.
-
Thickness dependent mechanical properties of soft ferromagnetic two-dimensional CoTe2
Authors:
Surbhi Slathia,
Cencen Wei,
Manoj Tripathi,
Raphael Tromer,
Solomon Demiss Negedu,
Conor Boland,
Suman Sarkar,
Douglas S. Galvao,
Alan Dalton,
Chandra Sekhar Tiwary
Abstract:
Two dimensional (2D) layered transition-metal-based tellurides (chalcogens) are known to harness their surface atoms characteristics to enhance topographical activities for energy conversion, storage, and magnetic applications. High surface energy due to unsaturated dangling bonds and larger lateral size than the thickness (volume) makes them a potential candidate for emerging electronics. Neverth…
▽ More
Two dimensional (2D) layered transition-metal-based tellurides (chalcogens) are known to harness their surface atoms characteristics to enhance topographical activities for energy conversion, storage, and magnetic applications. High surface energy due to unsaturated dangling bonds and larger lateral size than the thickness (volume) makes them a potential candidate for emerging electronics. Nevertheless, the gradual stacking of each sheet alters the surface atoms' subtle features, such as lattice expansion, leading to several phenomena and rendering tunable properties. In the present work, we have monitored thickness-dependent properties of the 2D CoTe2 sheets from nanoscale mechanics, tribology, surface potential distributions, interfacial interaction and magnetism using atomically resolved spectroscopy and different surface probe techniques, in conjunction with theoretical investigations: density functional theory (DFT) and molecular dynamics (MD). The variation in properties observed in theoretical investigation unleashes the crucial role of crystal planes of the CoTe2. The presented results are beneficial in expanding the use of 2D telluride family in flexible electronics, piezo sensors, tribo-generator, and next-generation memory devices.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
Symmetry considerations in exact diagonalization: spin-1/2 pyrochlore magnets
Authors:
C. Wei,
S. H. Curnoe
Abstract:
We describe how the methods of group theory (symmetry) are used to optimize the problem of exact diagonalization of a quantum system on a 16-site pyrochlore lattice. By analytically constructing a complete set of symmetrized states, we completely block-diagonalize the Hamiltonian. As an example, we consider a spin-1/2 system with nearest neighbour exchange interactions.
We describe how the methods of group theory (symmetry) are used to optimize the problem of exact diagonalization of a quantum system on a 16-site pyrochlore lattice. By analytically constructing a complete set of symmetrized states, we completely block-diagonalize the Hamiltonian. As an example, we consider a spin-1/2 system with nearest neighbour exchange interactions.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Quasi 1D Nanobelts from the Sustainable Liquid Exfoliation of Terrestrial Minerals for Future Martian based Electronics
Authors:
Cencen Wei,
Abhijit Roy,
Adel K. A. Aljarid,
Yi Hu,
S. Mark Roe,
Dimitrios G. Papageorgiou,
Raul Arenal,
Conor S. Boland
Abstract:
The sky is the limit with regards to the societal impact nanomaterials can have on our lives. However, in this study we show that their potential is out of this world. The planet Mars has an abundant source of calcium sulfate minerals and in our work, we show that these deposits can be the basis of transformative nanomaterials to potentially support future space endeavors. Through a scalable eco-f…
▽ More
The sky is the limit with regards to the societal impact nanomaterials can have on our lives. However, in this study we show that their potential is out of this world. The planet Mars has an abundant source of calcium sulfate minerals and in our work, we show that these deposits can be the basis of transformative nanomaterials to potentially support future space endeavors. Through a scalable eco-friendly liquid processing technique performed on two common terrestrial gypsum, our simple method presented a cost-efficient procedure to yield the commercially valuable intermediate phase of gypsum, known as bassanite. Through the liquid exfoliation of bassanite powders, suspensions of large aspect ratio anhydrite nanobelts with long-term stability were characterized through scanning electron microscopy and Raman spectroscopy. Transmission electron microscopy showed nanobelts to have a mesocrystal structure, with distinct nanoparticle constituents making up the lattice. Unexpectedly, anhydrite nanobelts had remarkable electronic properties, namely a bandgap that was easily tuned between semiconducting (~2.2 eV) and insulating (~4 eV) behaviors through dimensional control measured via atomic force microscopy. To demonstrate the application potential of our nanobelts; optoelectronic, electrochemical and nanocomposite measurements were made. For the hydrogen evolution reaction and mechanical reinforcement, selenite-based anhydrite nanobelts displayed superlative performances.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
Ptychographic nanoscale imaging of the magnetoelectric coupling in freestanding BiFeO$_3$
Authors:
Tim A. Butcher,
Nicholas W. Phillips,
Chun-Chien Chiu,
Chia-Chun Wei,
Sheng-Zhu Ho,
Yi-Chun Chen,
Erik Fröjdh,
Filippo Baruffaldi,
Maria Carulla,
Jiaguo Zhang,
Anna Bergamaschi,
Carlos A. F. Vaz,
Armin Kleibert,
Simone Finizio,
Jan-Chi Yang,
Shih-Wen Huang,
Jörg Raabe
Abstract:
Understanding the magnetic and ferroelectric ordering of magnetoelectric multiferroic materials at the nanoscale necessitates a versatile imaging method with high spatial resolution. Here, soft X-ray ptychography is employed to simultaneously image the ferroelectric and antiferromagnetic domains in an 80 nm thin freestanding film of the room-temperature multiferroic BiFeO$_3$ (BFO). The antiferrom…
▽ More
Understanding the magnetic and ferroelectric ordering of magnetoelectric multiferroic materials at the nanoscale necessitates a versatile imaging method with high spatial resolution. Here, soft X-ray ptychography is employed to simultaneously image the ferroelectric and antiferromagnetic domains in an 80 nm thin freestanding film of the room-temperature multiferroic BiFeO$_3$ (BFO). The antiferromagnetic spin cycloid of period 64 nm is resolved by reconstructing the corresponding resonant elastic X-ray scattering in real space and visualized together with mosaic-like ferroelectric domains in a linear dichroic contrast image at the Fe L$_3$ edge. The measurements reveal a near perfect coupling between the antiferromagnetic and ferroelectric ordering by which the propagation direction of the spin cycloid is locked orthogonally to the ferroelectric polarization. In addition, the study evinces both a preference for in-plane propagation of the spin cycloid and changes of the ferroelectric polarization by 71° between multiferroic domains in the epitaxial strain-free, freestanding BFO film. The results provide a direct visualization of the strong magnetoelectric coupling in BFO and of its fine multiferroic domain structure, emphasizing the potential of ptychographic imaging for the study of multiferroics and non-collinear magnetic materials with soft X-rays.
△ Less
Submitted 29 June, 2024; v1 submitted 25 August, 2023;
originally announced August 2023.
-
Ferromagnetic Superconductivity in Two-dimensional Niobium Diselenide
Authors:
Tingyu Qu,
Shangjian **,
Fuchen Hou,
Deyi Fu,
Junye Huang,
Darryl Foo Chuan Wei,
Xiao Chang,
Kenji Watanabe,
Takashi Taniguchi,
Junhao Lin,
Shaffique Adam,
Barbaros Özyilmaz
Abstract:
The co-existence of ferromagnetism and superconductivity becomes possible through unconventional pairing in the superconducting state. Such materials are exceedingly rare in solid-state systems but are promising platforms to explore topological phases, such as Majorana bound states. Theoretical investigations date back to the late 1950s, but only a few systems have so far been experimentally ident…
▽ More
The co-existence of ferromagnetism and superconductivity becomes possible through unconventional pairing in the superconducting state. Such materials are exceedingly rare in solid-state systems but are promising platforms to explore topological phases, such as Majorana bound states. Theoretical investigations date back to the late 1950s, but only a few systems have so far been experimentally identified as potential hosts. Here, we show that atomically-thin niobium diselenide (NbSe$_2$) intercalated with dilute cobalt atoms spontaneously displays ferromagnetism below the superconducting transition temperature ($T_c$). We elucidate the origin of this phase by constructing a magnetic tunnel junction that consists of cobalt and cobalt-doped niobium diselenide (Co-NbSe$_2$) as the two ferromagnetic electrodes, with an ultra-thin boron nitride as the tunnelling barrier. At a temperature well below $T_c$, the tunnelling magnetoresistance shows a bistable state, suggesting a ferromagnetic order in Co-NbSe$_2$. We propose a RKKY exchange coupling mechanism based on the spin-triplet superconducting order parameter to mediate such ferromagnetism. We further perform non-local lateral spin valve measurements to confirm the origin of the ferromagnetism. The observation of Hanle precession signals show spin diffusion length up to micrometres below Tc, demonstrating an intrinsic spin-triplet nature in superconducting NbSe$_2$. Our discovery of superconductivity-mediated ferromagnetism opens the door to an alternative design of ferromagnetic superconductors
△ Less
Submitted 11 June, 2023;
originally announced June 2023.
-
Chiral spin liquid state of strongly interacting bosons with a moat dispersion: a Monte Carlo simulation
Authors:
Chenan Wei,
Tigran A. Sedrakyan
Abstract:
We consider a system of strongly interacting bosons in two dimensions with moat band dispersion which supports an infinitely degenerate energy minimum along a closed contour in the Brillouin zone. The system has been theoretically predicted to stabilize a chiral spin liquid (CSL) ground state. In the thermodynamic limit and vanishing densities, $n\rightarrow 0$, chemical potential, $μ$, of the uni…
▽ More
We consider a system of strongly interacting bosons in two dimensions with moat band dispersion which supports an infinitely degenerate energy minimum along a closed contour in the Brillouin zone. The system has been theoretically predicted to stabilize a chiral spin liquid (CSL) ground state. In the thermodynamic limit and vanishing densities, $n\rightarrow 0$, chemical potential, $μ$, of the uniform CSL state was shown to scale with $n$ as $μ\sim n^2\log ^2n$. Here we perform a Monte Carlo simulation to find the parametric window for particle density, $n \lesssim \frac{k^2_0}{82 π}$, where $k_0$ is the linear size of the moat (the radius for a circular moat), for which the scaling $\sim n^2\log ^2n$ in the equation of state of the homogeneous CSL is preserved. We variationally show that the uniform CSL state is favorable in an interval beyond the obtained scale and present a schematic phase diagram for the system. Our results offer some density estimates for observing the low-density behavior of CSL in time-of-flight experiments with a recently Floquet-engineered moat band system of ultracold atoms in Phys. Rev. Lett. 128, 213401 (2022), and for the recent experiments on emergent excitonic topological order in imbalanced electron-hole bilayers.
△ Less
Submitted 2 May, 2023; v1 submitted 25 December, 2022;
originally announced December 2022.
-
Exact diagonalization for spin-1/2 spin ice pyrochlores
Authors:
C. Wei,
S. H. Curnoe
Abstract:
We find exact solutions to the Hamiltonian of a 16-site spin-1/2 pyrochlore crystal with nearest neighbour exchange interactions. The methods of group theory (symmetry) are used to completely block-diagonalize the Hamiltonian, yielding precise details about symmetry of the eigenstates, in particular those components which are {\em spin ice} states, in order to evaluate the spin ice density at fini…
▽ More
We find exact solutions to the Hamiltonian of a 16-site spin-1/2 pyrochlore crystal with nearest neighbour exchange interactions. The methods of group theory (symmetry) are used to completely block-diagonalize the Hamiltonian, yielding precise details about symmetry of the eigenstates, in particular those components which are {\em spin ice} states, in order to evaluate the spin ice density at finite temperature. At low enough temperatures, a `perturbed' spin ice phase is clearly outlined within the four parameter space of the general model of exchange interactions. The quantum spin ice phase is expected to exist outside these boundaries.
△ Less
Submitted 15 August, 2022; v1 submitted 14 August, 2022;
originally announced August 2022.
-
Strange metal phase of disordered magic-angle twisted bilayer graphene at low temperatures: from flatbands to weakly coupled Sachdev-Ye-Kitaev bundles
Authors:
Chenan Wei,
Tigran A. Sedrakyan
Abstract:
We use stochastic expansion and exact diagonalization to study the magic-angle twisted bilayer graphene (TBG) on a disordered substrate. We show that the substrate-induced strong Coulomb disorder in TBG with the chemical potential at the level of the flatbands drives the system to a network of weakly coupled Sachdev-Ye-Kitaev (SYK) bundles, stabilizing an emergent quantum chaotic strange metal (SM…
▽ More
We use stochastic expansion and exact diagonalization to study the magic-angle twisted bilayer graphene (TBG) on a disordered substrate. We show that the substrate-induced strong Coulomb disorder in TBG with the chemical potential at the level of the flatbands drives the system to a network of weakly coupled Sachdev-Ye-Kitaev (SYK) bundles, stabilizing an emergent quantum chaotic strange metal (SM) phase of TBG that exhibits the absence of quasiparticles. The Gaussian orthogonal ensemble dominates TBG's long-time chaotic dynamics at strong disorder, whereas fast quantum scrambling appears in the short-time dynamics. In weak disorder, gapped phases of TBG exhibit exponentially decaying specific heat capacity and exponential decay in out-of-time-ordered correlators (OTOC). This is the system behavior in correlated insulator and superconducting phases, in agreement with the corresponding Larkin-Ovchinnikov result for correlators. The result suggests a low-temperature transition from the superconducting and correlated insulating phases into the strange metal upon increasing the disorder strength. We propose a finite-temperature phase diagram for Coulomb-disordered TBG and discuss the experimental consequences of the emergent SM phase.
△ Less
Submitted 7 August, 2023; v1 submitted 19 May, 2022;
originally announced May 2022.
-
Superconductivity near the saddle point in the two-dimensional Rashba system Si(111)-$\sqrt{3}\times\sqrt{3}$-(Tl,Pb)
Authors:
T. Machida,
Y. Yoshimura,
T. Nakamura,
Y. Kohsaka,
T. Hanaguri,
C. -R. Hsing,
C. -M. Wei,
Y. Hasegawa,
S. Hasegawa,
A. Takayama
Abstract:
Two-dimensional Rashba superconductor Si(111)-$\sqrt{3}\times\sqrt{3}$-(Tl,Pb) is a candidate platform of mixed spin-singlet and -triplet superconductivity. A recent scanning tunneling microscope (STM) experiment revealed a pseudogap at the vortex core, suggesting the finite triplet component [T. Nakamura $\textit{et al.}$, Phys. Rev. B $\bf{ 98}$, 134505 (2018)]. Detailed spectroscopic informatio…
▽ More
Two-dimensional Rashba superconductor Si(111)-$\sqrt{3}\times\sqrt{3}$-(Tl,Pb) is a candidate platform of mixed spin-singlet and -triplet superconductivity. A recent scanning tunneling microscope (STM) experiment revealed a pseudogap at the vortex core, suggesting the finite triplet component [T. Nakamura $\textit{et al.}$, Phys. Rev. B $\bf{ 98}$, 134505 (2018)]. Detailed spectroscopic information of the superconducting gap and the low-energy band structure is necessary to establish the putative triplet superconductivity. Here, we performed high-energy-resolution spectroscopic imaging experiments on Si(111)-$\sqrt{3}\times\sqrt{3}$-(Tl,Pb) using an ultra-low temperature STM. We found that various spectroscopic features, including the vortex-core spectrum, are consistent with spin-singlet $s$-wave superconductivity, having no sign of the triplet component. The apparent contradiction with the previous STM result suggests that the nature of superconductivity changes within the same system. From the analysis of the quasiparticle interference patterns, we found that the Fermi energy is in the close vicinity of the saddle point near the $\overline{\rm{M}}$ point. We speculate that the nature of superconductivity varies depending on the saddle-point energy with respect to the Fermi energy, which is sample-dependent due to different band filling.
△ Less
Submitted 29 January, 2022;
originally announced January 2022.
-
An Eulerian nonlinear elastic model for compressible and fluidic tissue with radially symmetric growth
Authors:
Chaozhen Wei,
Min Wu
Abstract:
Cell proliferation, apoptosis, and myosin-dependent contraction can generate elastic stress and strain in living tissues, which may be dissipated by internal rearrangement through cell topological transition and cytoskeletal reorganization. Moreover, cells and tissues can change their sizes in response to mechanical cues. The present work demonstrates the role of tissue compressibility and interna…
▽ More
Cell proliferation, apoptosis, and myosin-dependent contraction can generate elastic stress and strain in living tissues, which may be dissipated by internal rearrangement through cell topological transition and cytoskeletal reorganization. Moreover, cells and tissues can change their sizes in response to mechanical cues. The present work demonstrates the role of tissue compressibility and internal rearranging activities on its size and mechanics regulation in the context of differential growth induced by a field of growth-promoting chemical factors. We develop a mathematical model based on finite elasticity and growth theory and the reference map techniques to describe the coupled tissue growth and mechanics in the Eulerian frame. We incorporate the tissue rearrangement by introducing a rearranging rate to the reference map evolution, leading to elastic-energy dissipation when tissue growth and deformation are in radial symmetry. By linearizing the model, we show that the stress follows the Maxwell-type viscoelastic relaxation. The rearrangement rate, which we call tissue fluidity, sets the stress relaxation time, and the ratio between the shear modulus and the fluidity sets the tissue viscosity. By nonlinear simulation of growing tissue spheroids and discs with graded growth rates along the radius, we find that the tissue compressibility and fluidity influence their equilibrium size. By comparing the nonlinear simulations with the linear analytical solutions, we show the size change as a nonlinear effect due to the advection of the tissue density flow, which only occurs when both tissue compressibility and fluidity are small. We apply the model to study tumor spheroid growth and epithelial disc growth when a reaction-diffusion process determines the growth-promoting factor field.
△ Less
Submitted 5 December, 2021; v1 submitted 17 March, 2021;
originally announced March 2021.
-
Optical lattice platform for the SYK model
Authors:
Chenan Wei,
Tigran A. Sedrakyan
Abstract:
The tractability of the Sachdev-Ye-Kitaev (SYK) model at large $N$ limit makes it ideal to theoretically study its chaotic non-Fermi liquid behavior and holographic duality properties. We show that the complex SYK Hamiltonian emerges from a system of spinless itinerant fermions in an optical Kagome lattice with a strong disorder. We discuss the regimes supporting flat band spectra in a Kagome latt…
▽ More
The tractability of the Sachdev-Ye-Kitaev (SYK) model at large $N$ limit makes it ideal to theoretically study its chaotic non-Fermi liquid behavior and holographic duality properties. We show that the complex SYK Hamiltonian emerges from a system of spinless itinerant fermions in an optical Kagome lattice with a strong disorder. We discuss the regimes supporting flat band spectra in a Kagome lattice, where the system can be non-dispersive. Random interaction between non-dispersive fermions is induced due to randomly distributed immobile impurities in the optical lattice, that exclude the presence of itinerant fermions at their locations. We show that the proposed setup is a reliable experimental platform to realize the SYK model and study its exotic behavior. We show that the velocity distribution of the released fermions is a sensitive probe of the many-body Wigner-Dyson spectral density of states while the averaged many-body Loschmidt echo scheme can measure two-point out-of-time-ordered correlation functions of the SYK system.
△ Less
Submitted 29 January, 2021; v1 submitted 15 May, 2020;
originally announced May 2020.
-
Double lattice potential for molecular dynamics simulation of silicon with demonstrated validity
Authors:
Hui Zhang,
Chongyang Wei,
Zhongwu Liu,
Xichun Zhong,
Dongling Jiao,
Wanqi Qiu,
Hongya Yu
Abstract:
To reproduce the diamond structure of silicon, double lattice (DL) potential constructed from two interatomic potentials for face centered cubic (fcc) lattice, is proposed for molecular dynamics (MD) simulations. For the validity test of MD simulation, the Tersoff potential, the Stillinger and Weber (SW) potential, the environment-dependent interatomic (EDI) potential, the charge optimized many-bo…
▽ More
To reproduce the diamond structure of silicon, double lattice (DL) potential constructed from two interatomic potentials for face centered cubic (fcc) lattice, is proposed for molecular dynamics (MD) simulations. For the validity test of MD simulation, the Tersoff potential, the Stillinger and Weber (SW) potential, the environment-dependent interatomic (EDI) potential, the charge optimized many-body (COMB) potential, and the modified embedded-atom (MEAM) potential have been also employed for comparison. The crystal lattice of simulated silicon system is identified by calculating the distribution functions of the distances between the atoms and the angles between the lines linking an atom with its nearest neighbors. The results are also compared with the perfect silicon crystal. The crystal lattice, the crystallization temperature, and elastic constants have been calculated from MD simulations using above potentials. The results show that the systems with modified Tersoff, SW, EDI, COMB, and MEAM potentials could not exhibit the diamond structure and only the DL potential gives diamond lattice. The ground state for DL potential is the wurtzite structure, and the metastable state formed during rapid cooling is the cubic diamond structure. The physical parameters obtained from the simulation with DL potential are in agreement with the experiment results. This work indicated that only DL potential is valid for MD simulation of silicon crystal among above various potentials.
△ Less
Submitted 11 August, 2020; v1 submitted 3 February, 2020;
originally announced February 2020.
-
Grain boundary triple junction dynamics: a continuum disconnection model
Authors:
Chaozhen Wei,
Luchan Zhang,
Jian Han,
David J. Srolovitz,
Yang Xiang
Abstract:
The microstructure of polycrystalline materials consists of networks of grain boundaries (GBs) and triple junctions (TJs), along which three GBs meet. The evolution of such microstructures may be driven by surface tension (capillarity), applied stresses, or other means that lead to a jump in chemical potential across the GBs. Here, we develop a model for the concurrent evolution of the GB/TJ netwo…
▽ More
The microstructure of polycrystalline materials consists of networks of grain boundaries (GBs) and triple junctions (TJs), along which three GBs meet. The evolution of such microstructures may be driven by surface tension (capillarity), applied stresses, or other means that lead to a jump in chemical potential across the GBs. Here, we develop a model for the concurrent evolution of the GB/TJ network based upon the microscopic mechanism of motion; the motion of line defects (disconnections) in the GB that have both dislocation and step character. The evolution involves thermally-activated disconnection formation/annihilation and migration of multiple disconnections modes/types. We propose this crystallography-respecting continuum model for the disconnection mechanism of GB/TJ dynamics derived with a variational approach based on the principle of maximum energy dissipation. The resultant TJ dynamics is reduced to an optimization problem with constraints that account for local microstructure geometry, conservation of Burgers vectors, and thermal-kinetic limitations on disconnection fluxes. We present analysis of and numerical simulations based upon our model to demonstrate the dependence of the GB and TJ mobilities and the TJ drag effect on the disconnection properties, and compare the predictions with molecular dynamics and experimental observations.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
A Continuum Multi-Disconnection-Mode Model for Grain Boundary Migration
Authors:
Chaozhen Wei,
Spencer L. Thomas,
Jian Han,
David J. Srolovitz,
Yang Xiang
Abstract:
We study the Grain Boundary (GB) migration based on the underlying disconnection structure and mechanism. Disconnections are line defects that lie solely within a GB and are characterized by both a Burgers vector and a step height, as set by the GB bicrystallography. Multiple disconnection modes can nucleate, as determined by their formation energy barriers and temperature, and move along the GB u…
▽ More
We study the Grain Boundary (GB) migration based on the underlying disconnection structure and mechanism. Disconnections are line defects that lie solely within a GB and are characterized by both a Burgers vector and a step height, as set by the GB bicrystallography. Multiple disconnection modes can nucleate, as determined by their formation energy barriers and temperature, and move along the GB under different kinds of competing driving forces including shear stress and chemical potential jumps across the GBs. We present a continuum model in two dimensions for GB migration where the GB migrates via the thermally-activated nucleation and kinetically-driven motion of disconnections. We perform continuum numerical simulations for investigating the GB migration behavior in single and multi-mode disconnection limits in both a bicrystal (under two types of boundary conditions) and for a finite-length GB with pinned ends. The results clearly demonstrate the significance of including the coupling and competing between different disconnection modes and driving forces for describing the complex and diverse phenomena of GB migration within polycyrstalline microstructures.
△ Less
Submitted 31 May, 2019;
originally announced May 2019.
-
Pressure-controlled Structural Symmetry Transition in Layered InSe
Authors:
Huimin Su,
Xuan Liu,
Chengrong Wei,
Junning Li,
Zeyuan Sun,
Qiye Liu,
Xuefeng Zhou,
Junhong Deng,
Huan Yi,
Qiaoyan Hao,
Yusheng Zhao,
Shanmin Wang,
Li Huang,
Shiwei Wu,
Wen**g Zhang,
Guixin Li,
Jun-Feng Dai
Abstract:
Structural symmetry of crystals plays important roles in physical properties of two-dimensional (2D) materials, particularly in the nonlinear optics regime. It has been a long-term exploration on the physical properties in 2D materials with various stacking structures, which correspond to different structural symmetries. Usually, the manipulation of rotational alignment between layers in 2D hetero…
▽ More
Structural symmetry of crystals plays important roles in physical properties of two-dimensional (2D) materials, particularly in the nonlinear optics regime. It has been a long-term exploration on the physical properties in 2D materials with various stacking structures, which correspond to different structural symmetries. Usually, the manipulation of rotational alignment between layers in 2D heterostructures has been realized at the synthetic stage through artificial stacking like assembling Lego bricks. However, the reconfigurable control of translational symmetry of crystalline structure is still challenging. High pressure, as a powerful external control knob, provides a very promising route to circumvent this constraint. Here, we experimentally demonstrate a pressure-controlled symmetry transition in layered InSe. The continuous and reversible evolution of structural symmetries can be in-situ monitored by using the polarization-resolved second harmonic generation (SHG) spectroscopy. As pressure changes, the reconfigurable symmetry transition of the SHG pattern from three-fold rotational symmetry to mirror symmetry was experimentally observed in a layered InSe samples and was successfully explained by the proposed interlayer-translation model. This opens new routes towards potential applications of manipulating crystal symmetry of 2D materials.
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Quasiparticle Interference in ZrSiS - Strongly Band-Selective Scattering Depending on Impurity Lattice Site
Authors:
Christopher J. Butler,
Yu-Mi Wu,
Cheng-Rong Hsing,
Yi Tseng,
Raman Sankar,
Ching-Ming Wei,
Fang-Cheng Chou,
Minn-Tsong Lin
Abstract:
Scanning tunneling microscopy visualizations of quasiparticle interference (QPI) enable powerful insights into the k-space properties of superconducting, topological, Rashba and other exotic electronic phases, but their reliance on impurities acting as scattering centers is rarely scrutinized. Here we investigate QPI at the vacuum-cleaved (001) surface of the Dirac semimetal ZrSiS. We find that in…
▽ More
Scanning tunneling microscopy visualizations of quasiparticle interference (QPI) enable powerful insights into the k-space properties of superconducting, topological, Rashba and other exotic electronic phases, but their reliance on impurities acting as scattering centers is rarely scrutinized. Here we investigate QPI at the vacuum-cleaved (001) surface of the Dirac semimetal ZrSiS. We find that interference patterns around impurities located on the Zr and S lattice sites appear very different, and can be ascribed to selective scattering of different sub-sets of the predominantly Zr 4d-derived band structure, namely the m = 0 and m = +/-1 components. We show that the selectivity of scattering channels requires an explanation beyond the different bands' orbital characteristics and their respective charge density distributions over Zr and S lattices sites. Importantly, this result shows that the usual assumption of generic scattering centers allowing observations of quasiparticle interference to shed light indiscriminately and isotropically upon the \textit{q}-space of scattering events does not hold, and that the scope and interpretation of QPI observations can therefore be be strongly contingent on the material defect chemistry. This finding promises to spur new investigations into the quasiparticle scattering process itself, to inform future interpretations of quasiparticle interference observations, and ultimately to aid the understanding and engineering of quantum electronic transport properties.
△ Less
Submitted 13 November, 2017; v1 submitted 4 July, 2017;
originally announced July 2017.
-
A Fokker-Planck reaction model for the epitaxial growth and shape transition of quantum dots
Authors:
Chaozhen Wei,
Brian J. Spencer
Abstract:
We construct a Fokker-Planck reaction model to investigate the dynamics of the coupled epitaxial growth and shape transition process of an array of quantum dots. The Fokker-Planck reaction model is based on a coupled system of Fokker-Planck equations wherein the distribution of each island type is governed by its own Fokker-Planck equation for growth, with reaction terms describing the shape trans…
▽ More
We construct a Fokker-Planck reaction model to investigate the dynamics of the coupled epitaxial growth and shape transition process of an array of quantum dots. The Fokker-Planck reaction model is based on a coupled system of Fokker-Planck equations wherein the distribution of each island type is governed by its own Fokker-Planck equation for growth, with reaction terms describing the shape transitions between islands of different types including asymmetric shapes. The reaction terms for the shape transitions depend on the island size and are determined from explicit calculations of the lowest-barrier pathway for each shape transition. This mean-field model enables us to consider the kinetics of asymmetric shape transitions and study the evolution of island shape distributions during the coupled growth and transition process. Through numerical simulations over a range of growth parameters, we find multimodal and unimodal evolution modes of the shape distribution of island arrays, which depend on the external deposition flux rate and temperature rather than the shape transition rate. However, the shape transition rate governs the kinetics of shape transitions and determines the fraction of islands that form via asymmetric states, which has implications for the development of asymmetric composition profiles within alloy islands.
△ Less
Submitted 11 April, 2017;
originally announced April 2017.
-
Observation of surface superstructure induced by systematic vacancies in the topological Dirac semimetal Cd$_{3}$As$_{2}$
Authors:
Christopher J. Butler,
Yi Tseng,
Cheng-Rong Hsing,
Yu-Mi Wu,
Raman Sankar,
Mei-Fang Wang,
Ching-Ming Wei,
Fang-Cheng Chou,
Minn-Tsong Lin
Abstract:
The Dirac semimetal phase found in Cd$_{3}$As$_{2}$ is protected by a $C_{4}$ rotational symmetry derived from a corkscrew arrangement of systematic Cd vacancies in its complicated crystal structure. It is therefore surprising that no microscopic observation, direct or indirect, of these systematic vacancies has so far been described. To this end, we revisit the cleaved (112) surface of Cd$_{3}$As…
▽ More
The Dirac semimetal phase found in Cd$_{3}$As$_{2}$ is protected by a $C_{4}$ rotational symmetry derived from a corkscrew arrangement of systematic Cd vacancies in its complicated crystal structure. It is therefore surprising that no microscopic observation, direct or indirect, of these systematic vacancies has so far been described. To this end, we revisit the cleaved (112) surface of Cd$_{3}$As$_{2}$ using a combined approach of scanning tunneling microscopy and \textit{ab initio} calculations. We determine the exact position of the (112) plane at which Cd$_{3}$As$_{2}$ naturally cleaves, and describe in detail a structural periodicity found at the reconstructed surface, consistent with that expected to arise from the systematic Cd vacancies. This reconciles the current state of microscopic surface observations with those of crystallographic and theoretical models, and demonstrates that this vacancy superstructure, central to the preservation of the Dirac semimetal phase, survives the cleavage process and retains order at the surface.
△ Less
Submitted 26 March, 2017;
originally announced March 2017.
-
Observation of a Modulational Instability in Bose-Einstein condensates
Authors:
P. J. Everitt,
M. A. Sooriyabandara,
M. Guasoni,
P. B. Wigley,
C. H. Wei,
G. D. McDonald,
K. S. Hardman,
P. Manju,
J. D. Close,
C. C. N. Kuhn,
S. S. Szigeti,
Y. S. Kivshar,
N. P. Robins
Abstract:
We observe the breakup dynamics of an elongated cloud of condensed $^{85}$Rb atoms placed in an optical waveguide. The number of localized spatial components observed in the breakup is compared with the number of solitons predicted by a plane-wave stability analysis of the nonpolynomial nonlinear Schrödinger equation, an effective one-dimensional approximation of the Gross-Pitaevskii equation for…
▽ More
We observe the breakup dynamics of an elongated cloud of condensed $^{85}$Rb atoms placed in an optical waveguide. The number of localized spatial components observed in the breakup is compared with the number of solitons predicted by a plane-wave stability analysis of the nonpolynomial nonlinear Schrödinger equation, an effective one-dimensional approximation of the Gross-Pitaevskii equation for cigar-shaped condensates. It is shown that the numbers predicted from the fastest growing sidebands are consistent with the experimental data, suggesting that modulational instability is the key underlying physical mechanism driving the breakup.
△ Less
Submitted 9 October, 2017; v1 submitted 21 March, 2017;
originally announced March 2017.
-
Anisotropic Raman Scattering and Mobility in Monolayer 1Td-ReS2 Controlled by Strain Engineering
Authors:
Z. H. Zhou,
B. C. Wei,
Y. M. Min,
L. Z. Liu
Abstract:
Regulation of electronic structure and mobility cut-on rate in two-dimensional transition metal dichalcogenides (TMDs) has attracted much attention because of its potential in electronic device design. The anisotropic Raman scattering and mobility cut-on rate of monolayer unique distorted-1T(1Td) ReS2 with external strain are determined theoretically based on the density function theory. The angle…
▽ More
Regulation of electronic structure and mobility cut-on rate in two-dimensional transition metal dichalcogenides (TMDs) has attracted much attention because of its potential in electronic device design. The anisotropic Raman scattering and mobility cut-on rate of monolayer unique distorted-1T(1Td) ReS2 with external strain are determined theoretically based on the density function theory. The angle-dependent Raman spectrum of Ag-like, Eg-like and Cp models are used to discriminate and analysis structural anisotropy; the strain is exploited to adjust the structural symmetry and electronic structure of ReS2 so as to enhance mobility cut-on rate to almost 6 times of the original value. Our results suggest the use of the strain engineering in high-quality semiconductor switch device.
△ Less
Submitted 15 November, 2016;
originally announced November 2016.
-
Improved model for the thermal conductivity of binary metallic systems
Authors:
Changdong Wei,
Nikolas Antolin,
Oscar D. Restrepo,
Wolfgang Windl,
Ji-Cheng Zhao
Abstract:
We extended and corrected Mott's two-band model for the composition-dependence of thermal and electrical conductivity in binary metal alloys based on high-throughput time-domain thermoreflectance (TDTR) measurements on diffusion multiples and scatterer-density calculations from first principles. Examining PdAg, PtRh, AuAg, AuCu, PdCu, PdPt, and NiRh binary alloys, we found that the nature of the t…
▽ More
We extended and corrected Mott's two-band model for the composition-dependence of thermal and electrical conductivity in binary metal alloys based on high-throughput time-domain thermoreflectance (TDTR) measurements on diffusion multiples and scatterer-density calculations from first principles. Examining PdAg, PtRh, AuAg, AuCu, PdCu, PdPt, and NiRh binary alloys, we found that the nature of the two dominant scatterer-bands considered in the Mott model changes with the alloys, and should be interpreted as a combination of the dominant element-specific s- and/or d-orbitals. Using calculated orbital and element-resolved density-of-states values calculated with density functional theory as input, we determined the correct orbital mix that dominates electron scattering for all examined alloys and find excellent agreement between fitted models and experiments. The proposed description of the composition dependence of the resistivity can be readily implemented into the CALPHAD framework.
△ Less
Submitted 30 September, 2016; v1 submitted 29 June, 2016;
originally announced June 2016.
-
Bound exciton and free exciton states in GaSe thin slab
Authors:
Chengrong Wei,
Xi Chen,
Dian Li,
Huimin Su,
Jun-Feng Dai
Abstract:
The photoluminescence (PL) and absorption experiments have been performed in GaSe slab with incident light polarized perpendicular to c-axis of sample at 10K. An obvious energy difference of about 34meV between exciton absorption peak and PL peak (the highest energy peak) is observed. By studying the temperature dependence of PL spectra, we attribute it to energy difference between free exciton an…
▽ More
The photoluminescence (PL) and absorption experiments have been performed in GaSe slab with incident light polarized perpendicular to c-axis of sample at 10K. An obvious energy difference of about 34meV between exciton absorption peak and PL peak (the highest energy peak) is observed. By studying the temperature dependence of PL spectra, we attribute it to energy difference between free exciton and bound exciton states, where main exciton absorption peak comes from free exciton absorption, and PL peak are attributed to recombination of bound exciton at 10K. This strong bound exciton effect is stable up to 50K. Moreover, the temperature dependence of integrated PL intensity and PL lifetime reveals that a non-radiative process, with active energy extracted as 0.5meV, dominates PL emission.
△ Less
Submitted 6 March, 2016;
originally announced March 2016.
-
Non-destructive shadowgraph imaging of ultracold atoms
Authors:
Paul B. Wigley,
Patrick J. Everitt,
Kyle S. Hardman,
Michael R. Hush,
Chunhua Wei,
Mahasen A. Sooriyabandara,
Manju Perumbil,
John D. Close,
Nicholas P. Robins,
Carlos C. N. Kuhn
Abstract:
An imaging system is presented that is capable of far-detuned non-destructive imaging of a Bose-Einstein condensate with the signal proportional to the second spatial derivative of the density. Whilst demonstrated with application to $^{85}\text{Rb}$, the technique generalizes to other atomic species and is shown to be capable of a signal to noise of ${\sim}25$ at $1$GHz detuning with $100$ in-tra…
▽ More
An imaging system is presented that is capable of far-detuned non-destructive imaging of a Bose-Einstein condensate with the signal proportional to the second spatial derivative of the density. Whilst demonstrated with application to $^{85}\text{Rb}$, the technique generalizes to other atomic species and is shown to be capable of a signal to noise of ${\sim}25$ at $1$GHz detuning with $100$ in-trap images showing no observable heating or atom loss. The technique is also applied to the observation of individual trajectories of stochastic dynamics inaccessible to single shot imaging. Coupled with a fast optical phase lock loop, the system is capable of dynamically switching to resonant absorption imaging during the experiment.
△ Less
Submitted 31 August, 2016; v1 submitted 18 January, 2016;
originally announced January 2016.
-
Majorana Positivity and the Fermion sign problem of Quantum Monte Carlo Simulations
Authors:
Z. C. Wei,
Congjun Wu,
Yi Li,
Shiwei Zhang,
T. Xiang
Abstract:
The sign problem is a major obstacle in quantum Monte Carlo simulations for many-body fermion systems. We examine this problem with a new perspective based on the Majorana reflection positivity and Majorana Kramers positivity. Two sufficient conditions are proven for the absence of the fermion sign problem. Our proof provides a unified description for all the interacting lattice fermion models pre…
▽ More
The sign problem is a major obstacle in quantum Monte Carlo simulations for many-body fermion systems. We examine this problem with a new perspective based on the Majorana reflection positivity and Majorana Kramers positivity. Two sufficient conditions are proven for the absence of the fermion sign problem. Our proof provides a unified description for all the interacting lattice fermion models previously known to be free of the sign problem based on the auxiliary field quantum Monte Carlo method. It also allows us to identify a number of new sign-problem-free interacting fermion models including, but not limited to, lattice fermion models with repulsive interactions but without particle-hole symmetry and interacting topological insulators with spin-flip terms.
△ Less
Submitted 18 January, 2018; v1 submitted 8 January, 2016;
originally announced January 2016.
-
Generation and Detection of Surface Plasmon Polaritons by Transition Metal Dichalcogenides for Chip-level Electronic-Photonic Integrated Circuits
Authors:
Zhuan Zhu,
Jiangtan Yuan,
Haiqing Zhou,
Jonathan Hu,
**g Zhang,
Chengli Wei,
Fang Yu,
Shuo Chen,
Yucheng Lan,
Yao Yang,
Yanan Wang,
Chao Niu,
Zhifeng Ren,
Jun Lou,
Zhiming Wang,
Jiming Bao
Abstract:
The monolithic integration of electronics and photonics has attracted enormous attention due to its potential applications. However, the realization of such hybrid circuits has remained a challenge because it requires optical communication at nanometer scales. A major challenge to this integration is the identification of a suitable material. After discussing the material aspect of the challenge,…
▽ More
The monolithic integration of electronics and photonics has attracted enormous attention due to its potential applications. However, the realization of such hybrid circuits has remained a challenge because it requires optical communication at nanometer scales. A major challenge to this integration is the identification of a suitable material. After discussing the material aspect of the challenge, we identified atomically thin transition metal dichalcogenides (TMDs) as a perfect material platform to implement the circuit. The selection of TMDs is based on their very distinct property: monolayer TMDs are able to emit and absorb light at the same wavelength determined by direct exciton transitions. To prove the concept, we fabricated simple devices consisting of silver nanowires as plasmonic waveguides and monolayer TMDs as active optoelectronic media. Using photoexcitation, direct optical imaging and spectral analysis, we demonstrated generation and detection of surface plasmon polaritons by monolayer TMDs. Regarded as novel materials for electronics and photonics, transition metal dichalcogenides are expected to find new applications in next generation integrated circuits.
△ Less
Submitted 22 May, 2016; v1 submitted 7 July, 2015;
originally announced July 2015.
-
Manganese reduction/oxidation reaction on graphene composites as a reversible process for storing enormous energy at a fast rate
Authors:
Yanyi Chen,
Chengjun Xu,
Shan Shi,
Jia Li,
Feiyu Kang,
Chunguang Wei
Abstract:
Oxygen reduction/evolution reaction (ORR/OER) is a basic process for fuel cells or metal air batteries. However, ORR/OER generally requires noble metal catalysts and suffers from low solubility (10-3 molar per liter) of O2, low kinetics rate (10-6 cm2/s) and low reversibility. We report a manganese reduction/oxidation reaction (MRR/MOR) on graphene/MnO2 composites, delivering a high capacity (4200…
▽ More
Oxygen reduction/evolution reaction (ORR/OER) is a basic process for fuel cells or metal air batteries. However, ORR/OER generally requires noble metal catalysts and suffers from low solubility (10-3 molar per liter) of O2, low kinetics rate (10-6 cm2/s) and low reversibility. We report a manganese reduction/oxidation reaction (MRR/MOR) on graphene/MnO2 composites, delivering a high capacity (4200 mAh/g), fast kinetics (0.0024 cm2/s, three orders higher than ORR/OER), high solubility (three orders than O2), and high reversibility (100%). We further use MRR/MOR to invent a rechargeable manganese ion battery (MIB), which delivers an energy density of 1200 Wh/Kg (several times of lithium ion battery), a fast charge ability (3 minutes), and a long cycle life (10,000 cycles). MRR/MOR renders a new class of energy conversion or storage systems with a very high energy density enabling electric vehicles run much more miles at one charge.
△ Less
Submitted 10 October, 2014;
originally announced October 2014.
-
Stability and electronic properties of two-dimensional silicene and germanene on graphene
Authors:
Yongmao Cai,
Chih-Piao Chuu,
C. M. Wei,
M. Y. Chou
Abstract:
We present first-principles calculations of silicene/graphene and germanene/graphene bilayers. Various supercell models are constructed in the calculations in order to reduce the strain of the lattice-mismatched bilayer systems. Our energetics analysis and electronic structure results suggest that graphene can be used as a substrate to synthesize monolayer silicene and germanene. Multiple phases o…
▽ More
We present first-principles calculations of silicene/graphene and germanene/graphene bilayers. Various supercell models are constructed in the calculations in order to reduce the strain of the lattice-mismatched bilayer systems. Our energetics analysis and electronic structure results suggest that graphene can be used as a substrate to synthesize monolayer silicene and germanene. Multiple phases of single crystalline silicene and germanene with different orientations relative to the substrate could coexist at room temperature. The weak interaction between the overlayer and the substrate preserves the low-buckled structure of silicene and germanene, as well as their linear energy bands. The gap induced by breaking the sublattice symmetry in silicene on graphene can be up to 57 meV.
△ Less
Submitted 9 December, 2013;
originally announced December 2013.
-
Partial order and finite-temperature phase transitions in Potts models on irregular lattices
Authors:
Q. N. Chen,
M. P. Qin,
J. Chen,
Z. C. Wei,
H. H. Zhao,
B. Normand,
T. Xiang
Abstract:
We evaluate the thermodynamic properties of the 4-state antiferromagnetic Potts model on the Union- Jack lattice using tensor-based numerical methods. We present strong evidence for a previously unknown, "entropy-driven," finite-temperature phase transition to a partially ordered state. From the thermodynamics of Potts models on the diced and centered diced lattices, we propose that finite-tempera…
▽ More
We evaluate the thermodynamic properties of the 4-state antiferromagnetic Potts model on the Union- Jack lattice using tensor-based numerical methods. We present strong evidence for a previously unknown, "entropy-driven," finite-temperature phase transition to a partially ordered state. From the thermodynamics of Potts models on the diced and centered diced lattices, we propose that finite-temperature transitions and partially ordered states are ubiquitous on irregular lattices.
△ Less
Submitted 16 October, 2011; v1 submitted 25 May, 2011;
originally announced May 2011.
-
Plaquette order and deconfined quantum critical point in the spin-1 bilinear-biquadratic Heisenberg model on the honeycomb lattice
Authors:
H. H. Zhao,
Cenke Xu,
Q. N. Chen,
Z. C. Wei,
M. P. Qin,
G. M. Zhang,
T. Xiang
Abstract:
We have precisely determined the ground state phase diagram of the quantum spin-1 bilinear-biquadratic Heisenberg model on the honeycomb lattice using the tensor renormalization group method. We find that the ferromagnetic, ferroquadrupolar, and a large part of the antiferromagnetic phases are stable against quantum fluctuations. However, around the phase where the ground state is antiferroquadrup…
▽ More
We have precisely determined the ground state phase diagram of the quantum spin-1 bilinear-biquadratic Heisenberg model on the honeycomb lattice using the tensor renormalization group method. We find that the ferromagnetic, ferroquadrupolar, and a large part of the antiferromagnetic phases are stable against quantum fluctuations. However, around the phase where the ground state is antiferroquadrupolar ordered in the classical limit, quantum fluctuations suppress completely all magnetic orders, leading to a plaquette order phase which breaks the lattice symmetry but preserves the spin SU(2) symmetry. On the evidence of our numerical results, the quantum phase transition between the antiferromagnetic phase and the plaquette phase is found to be either a direct second order or a very weak first order transition.
△ Less
Submitted 23 April, 2012; v1 submitted 13 May, 2011;
originally announced May 2011.
-
Translation invariant tensor product states in a finite lattice system
Authors:
J. W. Cai,
Q. N. Chen,
H. H. Zhao,
Z. Y. Xie,
M. P. Qin,
Z. C. Wei,
T. Xiang
Abstract:
We show that the matrix (or more generally tensor) product states in a finite translation invariant system can be accurately constructed from the same set of local matrices (or tensors) that are determined from an infinite lattice system in one or higher dimensions. This provides an efficient approach for studying translation invariant tensor product states in finite lattice systems. Two methods a…
▽ More
We show that the matrix (or more generally tensor) product states in a finite translation invariant system can be accurately constructed from the same set of local matrices (or tensors) that are determined from an infinite lattice system in one or higher dimensions. This provides an efficient approach for studying translation invariant tensor product states in finite lattice systems. Two methods are introduced to determine these size-independent local tensors.
△ Less
Submitted 9 November, 2010;
originally announced November 2010.
-
Renormalization of tensor-network states
Authors:
H. H. Zhao,
Z. Y. Xie,
Q. N. Chen,
Z. C. Wei,
J. W. Cai,
T. Xiang
Abstract:
We have discussed the tensor-network representation of classical statistical or interacting quantum lattice models, and given a comprehensive introduction to the numerical methods we recently proposed for studying the tensor-network states/models in two dimensions. A second renormalization scheme is introduced to take into account the environment contribution in the calculation of the partition…
▽ More
We have discussed the tensor-network representation of classical statistical or interacting quantum lattice models, and given a comprehensive introduction to the numerical methods we recently proposed for studying the tensor-network states/models in two dimensions. A second renormalization scheme is introduced to take into account the environment contribution in the calculation of the partition function of classical tensor network models or the expectation values of quantum tensor network states. It improves significantly the accuracy of the coarse grained tensor renormalization group method. In the study of the quantum tensor-network states, we point out that the renormalization effect of the environment can be efficiently and accurately described by the bond vector. This, combined with the imaginary time evolution of the wavefunction, provides an accurate projection method to determine the tensor-network wavfunction. It reduces significantly the truncation error and enable a tensor-network state with a large bond dimension, which is difficult to be accessed by other methods, to be accurately determined.
△ Less
Submitted 26 April, 2010; v1 submitted 6 February, 2010;
originally announced February 2010.
-
Radius and chirality dependent conformation of polymer molecule at nanotube interface
Authors:
Chenyu Wei
Abstract:
Temperature dependent conformations of linear polymer molecules adsorbed at carbon nanotube (CNT) interfaces are investigated through molecule dynamics simulations. Model polyethylene (PE) molecules are shown to have selective conformations on CNT surface, controlled by atomic structures of CNT lattice and geometric coiling energy. PE molecules form entropy driven assembly domains, and their pre…
▽ More
Temperature dependent conformations of linear polymer molecules adsorbed at carbon nanotube (CNT) interfaces are investigated through molecule dynamics simulations. Model polyethylene (PE) molecules are shown to have selective conformations on CNT surface, controlled by atomic structures of CNT lattice and geometric coiling energy. PE molecules form entropy driven assembly domains, and their preferred wrap** angles around large radius CNT (40, 40) reflect the molecule configurations with energy minimums on a graphite plane. While PE molecules prefer wrap** on small radius armchair CNT (5, 5) predominantly at low temperatures, their configurations are shifted to larger wrap** angle ones on a similar radius zigzag CNT (10, 0). A nematic transformation around 280 K is identified through Landau-deGennes theory, with molecule aligning along tube axis in extended conformations
△ Less
Submitted 7 April, 2006;
originally announced April 2006.
-
A structural path for the icosahedra <-> fcc structural transition in clusters
Authors:
Ching-Ming Wei,
Ching Cheng,
Chun-Ming Chang
Abstract:
We propose a structural path for the icosahedra <-> fcc transition in clusters and demonstrate the transition in Pb_13 by ab initio molecular-dynamics simulation. The proposed path can be described by using only two variables. The energy surface on this two-dimensional space for Pb_13 was calculated and a barrierless fcc-to-ico energy path was found. The atomic displacements of the proposed stru…
▽ More
We propose a structural path for the icosahedra <-> fcc transition in clusters and demonstrate the transition in Pb_13 by ab initio molecular-dynamics simulation. The proposed path can be described by using only two variables. The energy surface on this two-dimensional space for Pb_13 was calculated and a barrierless fcc-to-ico energy path was found. The atomic displacements of the proposed structural transition for ico and fcc Pb_13 were identified as one of the vibrational eigenmodes of the clusters with a soft mode for fcc Pb_13. These agree with the energy curvatures around the two structures, i.e. the ico Pb_13 is at the bottom of a valley on the energy surface while the fcc Pb_13 is at a saddle point. The barriers of this transition for larger clusters of Pb_n (n=55, 147 and 309) were also calculated, by ab initio elastic-band method, and found being smaller than the room-temperature thermal energy.
△ Less
Submitted 8 January, 2005;
originally announced January 2005.
-
Thermal Expansion and Diffusion Coefficients of Carbon Nanotube-Polymer Composites
Authors:
Chenyu Wei,
Deepak Srivastava,
Kyeongjae Cho
Abstract:
Classical molecular dynamics (MD) simulations employing Brenner potential for intra-nanotube interactions and Van der Waals forces for polymer-nanotube interfaces are used to invetigate the thermal expansion and diffusion characteristics of carbon nanotube-polyethylene composites. Additions of carbon nanotubes to polymer matrix are found to increase the glass transition temperature Tg, and therm…
▽ More
Classical molecular dynamics (MD) simulations employing Brenner potential for intra-nanotube interactions and Van der Waals forces for polymer-nanotube interfaces are used to invetigate the thermal expansion and diffusion characteristics of carbon nanotube-polyethylene composites. Additions of carbon nanotubes to polymer matrix are found to increase the glass transition temperature Tg, and thermal expansion and diffusion coefficients in the composite above Tg. These findings could have implications in CNT composite processing, coating and painting applications.
△ Less
Submitted 17 March, 2002;
originally announced March 2002.
-
Tensile Strength of Carbon Nanotubes under Realistic Temperature and Strain Rate
Authors:
Chenyu Wei,
Kyeongjae Cho,
Deepak Srivastava
Abstract:
Strain rate and temperature dependence of the tensile strength of single-walled carbon nanotubes has been investigated with molecular dynamics simulations. The tensile failure or yield strain is found to be strongly dependent on the temperature and strain rate. A transition state theory based predictive model is developed for the tensile failure of nanotubes. Based on the parameters fitted from…
▽ More
Strain rate and temperature dependence of the tensile strength of single-walled carbon nanotubes has been investigated with molecular dynamics simulations. The tensile failure or yield strain is found to be strongly dependent on the temperature and strain rate. A transition state theory based predictive model is developed for the tensile failure of nanotubes. Based on the parameters fitted from high-strain rate and temperature dependent molecular dynamics simulations, the model predicts that a defect free $μm$ long single-wall nanotub at 300K, stretched with a strain rate of $1%/hour$, fails at about $9 \pm 1%$ tensile strain. This is in good agreement with recent experimental findings.
△ Less
Submitted 27 February, 2002; v1 submitted 27 February, 2002;
originally announced February 2002.
-
Poisoning of Hydrogen Dissociation at Pd (100) by Adsorbed Sulfur Studied by ab initio Quantum Dynamics and ab initio Molecular Dynamics
Authors:
Axel Gross,
Ching-Ming Wei,
Matthias Scheffler
Abstract:
We report calculations of the dissociative adsorption of H_2 at Pd (100) covered with 1/4 monolayer of sulfur using quantum dynamics as well as molecular dynamics and taking all six degrees of freedom of the two H atoms fully into account. The ab initio potential-energy surface (PES) is found to be very strongly corrugated. In particular we discuss the influence of tunneling, zero-point vibratio…
▽ More
We report calculations of the dissociative adsorption of H_2 at Pd (100) covered with 1/4 monolayer of sulfur using quantum dynamics as well as molecular dynamics and taking all six degrees of freedom of the two H atoms fully into account. The ab initio potential-energy surface (PES) is found to be very strongly corrugated. In particular we discuss the influence of tunneling, zero-point vibrations, localization of the nuclei's wave function when narrow valleys of the PES are passed, steering of the approaching H_2 molecules towards low energy barrier configurations, and the time scales of the center of mass motion and the other degrees of freedom. Several ``established'' concepts, which were derived from low-dimensional dynamical studies, are shown to be not valid.
△ Less
Submitted 24 August, 1998;
originally announced August 1998.
-
Structure and Vibrations of the Vicinal Copper (211) Surface
Authors:
C. Y. Wei,
Steven P. Lewis,
E. J. Mele,
Andrew M. Rappe
Abstract:
We report a first principles theoretical study of the surface relaxation and lattice dynamics of the Cu(211) surface using the plane wave pseudopotential method. We find large atomic relaxations for the first several atomic layers near the step edges on this surface, and a substantial step-induced renormalization of the surface harmonic force constants. We use the results to study the harmonic f…
▽ More
We report a first principles theoretical study of the surface relaxation and lattice dynamics of the Cu(211) surface using the plane wave pseudopotential method. We find large atomic relaxations for the first several atomic layers near the step edges on this surface, and a substantial step-induced renormalization of the surface harmonic force constants. We use the results to study the harmonic fluctuations around the equilibrium structure and find three new step-derived features in the zone center vibrational spectrum. Comparison of these results with previous theoretical work and weith experimental studies using inelastic He scattering are reported.
△ Less
Submitted 5 December, 1997;
originally announced December 1997.
-
Ab initio calculation of the potential energy surface for the dissociation of H_2 on the sulfur covered Pd(100) surface
Authors:
C. M. Wei,
A. Gross,
M. Scheffler
Abstract:
The presence of sulfur atoms on the Pd(100) surface is known to hinder the dissociative adsorption of hydrogen. Using density-functional theory and the full-potential linear augmented plane-wave method, we investigate the potential energy surface (PES) of the dissociative adsorption of H_2 on the sulfur covered Pd(100) surface. The PES is changed significantly compared to the dissociation on the…
▽ More
The presence of sulfur atoms on the Pd(100) surface is known to hinder the dissociative adsorption of hydrogen. Using density-functional theory and the full-potential linear augmented plane-wave method, we investigate the potential energy surface (PES) of the dissociative adsorption of H_2 on the sulfur covered Pd(100) surface. The PES is changed significantly compared to the dissociation on the clean Pd(100) surface, in particular for hydrogen close to the S atoms. While the hydrogen dissociation at the clean Pd(100) surface is non-activated, for the (2x2) sulfur adlayer (coverage Theta_S= 0.25) the dissociation of H_2 is inhibited by energy barriers. Their heights strongly depend on the distance between the hydrogen and sulfur atoms leading to a highly corrugated PES. The largest barriers are in the vicinity of the sulfur atoms due to the strong repulsion between sulfur and hydrogen. Still the hydrogen dissociation on the (2x2) sulfur covered Pd(100) surface is exothermic. Thus the poisoning effect of sulfur adatoms for H_2 dissociation at low sulfur coverage (Theta_S <= 0.25) is mainly governed by the formation of energy barriers, not by blocking of the adsorption sites. For the c(2x2) sulfur adlayer (Theta_S= 0.5), the PES for hydrogen dissociation is purely repulsive. This is due to the fact that for all different possible adsorption geometries the hydrogen molecules come too close to the sulfur adatoms before the dissociation is completed.
△ Less
Submitted 27 November, 1997;
originally announced November 1997.
-
Reciprocity Theorems for Ab Initio Force Calculations
Authors:
C. Wei,
Steven P. Lewis,
E. J. Mele,
Andrew M. Rappe
Abstract:
We present a method for calculating ab initio interatomic forces which scales quadratically with the size of the system and provides a physically transparent representation of the force in terms of the spatial variation of the electronic charge density. The method is based on a reciprocity theorem for evaluating an effective potential acting on a charged ion in the core of each atom. We illustra…
▽ More
We present a method for calculating ab initio interatomic forces which scales quadratically with the size of the system and provides a physically transparent representation of the force in terms of the spatial variation of the electronic charge density. The method is based on a reciprocity theorem for evaluating an effective potential acting on a charged ion in the core of each atom. We illustrate the method with calculations for diatomic molecules.
△ Less
Submitted 22 August, 1996;
originally announced August 1996.