-
Chiral Triclinic Metamaterial Crystals Supporting Isotropic Acoustical Activity and Isotropic Chiral Phonons
Authors:
Yi Chen,
Muamer Kadic,
Martin Wegener
Abstract:
Recent work predicted the existence of isotropic chiral phonon dispersion relations of the lowest bands connected to isotropic acoustical activity in cubic crystalline approximants of 3D chiral icosahedral metamaterial quasicrystals. While these architectures are fairly broadband and presumably robust against fabrication tolerances due to orientation averaging, they are extremely complex, very har…
▽ More
Recent work predicted the existence of isotropic chiral phonon dispersion relations of the lowest bands connected to isotropic acoustical activity in cubic crystalline approximants of 3D chiral icosahedral metamaterial quasicrystals. While these architectures are fairly broadband and presumably robust against fabrication tolerances due to orientation averaging, they are extremely complex, very hard to manufacture experimentally, and they show effects which are about an order of magnitude smaller compared to those of ordinary highly anisotropic chiral cubic metamaterial crystals. Here, we propose and analyze a chiral triclinic metamaterial crystal exhibiting broadband isotropic acoustical activity. These 3D truss lattices are much less complex and exhibit substantially larger effects than the 3D quasicrystals at the price of being somewhat more susceptible to fabrication tolerances. This susceptibility originates from the fact that we have tailored the lowest two transverse phonon bands to exhibit an "accidental" degeneracy in momentum space.
△ Less
Submitted 1 October, 2020;
originally announced October 2020.
-
Dynamic behavior of mechanical cloaks designed by direct lattice transformation
Authors:
Muamer Kadic,
Martin Wegener,
Andre Nicolet,
Frederic Zolla,
Sebastien Guenneau,
Andre Diatta
Abstract:
Steering waves in elastic solids is more demanding than steering waves in electromagnetism or acoustics. As a result, designing material distributions which are the counterpart of optical invisibility cloaks in elasticity poses a major challenge. Waves of all polarizations should be guided around an obstacle to emerge on the downstream side as though no obstacle were there. Recently, we have intro…
▽ More
Steering waves in elastic solids is more demanding than steering waves in electromagnetism or acoustics. As a result, designing material distributions which are the counterpart of optical invisibility cloaks in elasticity poses a major challenge. Waves of all polarizations should be guided around an obstacle to emerge on the downstream side as though no obstacle were there. Recently, we have introduced the direct-lattice-transformation approach. This simple and explicit construction procedure led to extremely good cloaking results in the static case. Here, we transfer this approach to the dynamic case, i.e., to elastic waves or phonons. We demonstrate broadband reduction of scattering, with best suppressions exceeding a factor of five when using cubic coordinate transformations instead of linear ones. To reliably and quantitatively test these cloaks efficiency, we use an effective-medium approach.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
On static chiral Milton-Briane-Willis continuum mechanics
Authors:
Muamer Kadic,
André Diatta,
Tobias Frenzel,
Sebastien Guenneau,
Martin Wegener
Abstract:
Recent static experiments on twist effects in chiral three-dimensional mechanical metamaterials have been discussed in the context of micropolar Eringen continuum mechanics, which is a generalization of Cauchy elasticity. For cubic symmetry, Eringen elasticity comprises nine additional parameters with respect to Cauchy elasticity, of which three directly influence chiral effects. Here, we discuss…
▽ More
Recent static experiments on twist effects in chiral three-dimensional mechanical metamaterials have been discussed in the context of micropolar Eringen continuum mechanics, which is a generalization of Cauchy elasticity. For cubic symmetry, Eringen elasticity comprises nine additional parameters with respect to Cauchy elasticity, of which three directly influence chiral effects. Here, we discuss the behavior of the static case of an alternative generalization of Cauchy elasticity, the Milton-Briane-Willis equations. We show that in the homogeneous static cubic case only one additional parameter with respect to Cauchy elasticity results, which directly influences chiral effects. We show that the Milton-Briane-Willis equations qualitatively describe the experimentally observed chiral twist effects, too. We connect the behavior to a characteristic length scale.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Theory of the Hall effect in three-dimensional metamaterials
Authors:
Christian Kern,
Graeme W Milton,
Muamer Kadic,
Martin Wegener
Abstract:
We apply homogenization theory to calculate the effective electric conductivity and Hall coefficient tensor of passive three-dimensionally periodic metamaterials subject to a weak external static homogeneous magnetic field. We not only allow for variations of the conductivity and the Hall coefficient of the constituent material(s) within the metamaterial unit cells, but also for spatial variations…
▽ More
We apply homogenization theory to calculate the effective electric conductivity and Hall coefficient tensor of passive three-dimensionally periodic metamaterials subject to a weak external static homogeneous magnetic field. We not only allow for variations of the conductivity and the Hall coefficient of the constituent material(s) within the metamaterial unit cells, but also for spatial variations of the magnetic permeability. We present four results. First, our findings are consistent with previous numerical calculations for finite-size structures as well as with recent experiments. This provides a sound theoretical justification for describing such metamaterials in terms of effective material parameters. Second, we visualize the cofactor fields appearing in the homogenization integrals. Thereby, we identify those parts of the metamaterial structures which are critical for the observed effective metamaterial parameters, providing a unified view onto various previously introduced single-constituent/multiple-constituent and isotropic/anisotropic architectures, respectively. Third, we suggest a novel three-dimensional non-magnetic metamaterial architecture exhibiting a sign reversal of the effective isotropic Hall coefficient. It is conceptually distinct from the original chainmail-like geometry, for which the sign reversal is based on interlinked rings. Fourth, we discuss two examples for metamaterial architectures comprising magnetic materials: Yet another possibility to reverse the sign of the isotropic Hall coefficient and an approach to conceptually break previous bounds for the effective mobility.
△ Less
Submitted 13 June, 2018;
originally announced June 2018.
-
Micro-Structured Two-Component 3D Metamaterials with Negative Thermal-Expansion Coefficient from Positive Constituents
Authors:
**gyuan Qu,
Muamer Kadic,
Andreas Naber,
Martin Wegener
Abstract:
Controlling the thermal expansion of materials is of great technological importance. Uncontrolled thermal expansion can lead to failure or irreversible destruction of structures and devices. In ordinary crystals, thermal expansion is governed by the asymmetry of the microscopic binding potential, which cannot be adjusted easily. In artificial crystals called metamaterials, thermal expansion can be…
▽ More
Controlling the thermal expansion of materials is of great technological importance. Uncontrolled thermal expansion can lead to failure or irreversible destruction of structures and devices. In ordinary crystals, thermal expansion is governed by the asymmetry of the microscopic binding potential, which cannot be adjusted easily. In artificial crystals called metamaterials, thermal expansion can be controlled by structure. Here, following previous theoretical work, we fabricate three-dimensional two-component polymer microlattices by using gray-tone laser lithography. We perform cross-correlation analysis of optical microscopy images taken at different sample temperatures. The derived displacement-vector field reveals that the thermal expansion and resulting bending of the bi-material beams leads to a rotation of the 3D chiral crosses arranged onto a 3D checkerboard pattern within one metamaterial unit cell. These rotations can over-compensate the expansion and lead to an effectively negative thermal length-expansion coefficient for all positive constituents evidencing a striking level of thermal-expansion control.
△ Less
Submitted 7 October, 2016;
originally announced October 2016.
-
Parallel Hall effect from 3D single-component metamaterials
Authors:
Christian Kern,
Muamer Kadic,
Martin Wegener
Abstract:
We propose a class of three-dimensional metamaterial architectures composed of a single doped semiconductor (e.g., n-Si) in air or vacuum that lead to unusual effective behavior of the classical Hall effect. Using an anisotropic structure, we numerically demonstrate a Hall voltage that is parallel---rather than orthogonal---to the external static magnetic-field vector ("parallel Hall effect"). The…
▽ More
We propose a class of three-dimensional metamaterial architectures composed of a single doped semiconductor (e.g., n-Si) in air or vacuum that lead to unusual effective behavior of the classical Hall effect. Using an anisotropic structure, we numerically demonstrate a Hall voltage that is parallel---rather than orthogonal---to the external static magnetic-field vector ("parallel Hall effect"). The sign of this parallel Hall voltage can be determined by a structure parameter. Together with the previously demonstrated positive or negative orthogonal Hall voltage, we demonstrate four different sign combinations
△ Less
Submitted 15 July, 2015;
originally announced July 2015.
-
Second-order nonlinear optical metamaterials: ABC-type nanolaminates
Authors:
Luca Alloatti,
Clemens Kieninger,
Andreas Froelich,
Matthias Lauermann,
Tobias Frenzel,
Kira Koehnle,
Wolfgang Freude,
Juerg Leuthold,
Martin Wegener,
Christian Koos
Abstract:
Structuring optical materials on a nanometer scale can lead to artificial effective media, or metamaterials, with strongly altered optical behavior. Metamaterials can provide a wide range of linear optical properties such as negative refractive index, hyperbolic dispersion, or magnetic behavior at optical frequencies. Nonlinear optical properties, however, have only been demonstrated for patterned…
▽ More
Structuring optical materials on a nanometer scale can lead to artificial effective media, or metamaterials, with strongly altered optical behavior. Metamaterials can provide a wide range of linear optical properties such as negative refractive index, hyperbolic dispersion, or magnetic behavior at optical frequencies. Nonlinear optical properties, however, have only been demonstrated for patterned metallic films which suffer from high optical losses. Here we show that second-order nonlinear metamaterials can also be obtained from non-metallic centrosymmetric constituents with inherently low optical absorption. In our proof-of-principle experiments, we have iterated atomic-layer deposition (ALD) of three different constituents, A = Al$_2$O$_3$, B = TiO$_2$ and C = HfO$_2$. The centrosymmetry of the resulting ABC stack is broken since the ABC and the inverted CBA sequences are not equivalent - a necessary condition for non-zero second-order nonlinearity. To the best of our knowledge, this is the first realization of a bulk nonlinear optical metamaterial.
△ Less
Submitted 3 April, 2015; v1 submitted 1 April, 2015;
originally announced April 2015.
-
Hall-effect sign-inversion in a realizable 3D metamaterial
Authors:
Muamer Kadic,
Robert Schittny,
Tiemo Bückmann,
Christian Kern,
Martin Wegener
Abstract:
In 2009, Briane and Milton proved mathematically the existence of three-dimensional isotropic metamaterials with a classical Hall coefficient which is negative with respect to that of all of the metamaterial constituents. Here, we significantly simplify their blueprint towards an architecture composed of only a single constituent material in vacuum/air, which can be seen as a special type of poros…
▽ More
In 2009, Briane and Milton proved mathematically the existence of three-dimensional isotropic metamaterials with a classical Hall coefficient which is negative with respect to that of all of the metamaterial constituents. Here, we significantly simplify their blueprint towards an architecture composed of only a single constituent material in vacuum/air, which can be seen as a special type of porosity. We show that the sign of the Hall voltage is determined by a separation parameter between adjacent tori. This qualitative behavior is robust even for only a small number of metamaterial unit cells. The combination of simplification and robustness brings experimental verifications of this striking sign-inversion into reach.
△ Less
Submitted 20 March, 2015;
originally announced March 2015.
-
Pentamode metamaterials with independently tailored bulk modulus and mass density
Authors:
Muamer Kadic,
Tiemo Buckmann,
Robert Schittny,
Peter Gumbsch,
Martin Wegener
Abstract:
We propose a class of linear elastic three-dimensional metamaterials for which the effective parameters bulk modulus and mass density can be adjusted independently over a large range|which is not possible for ordinary materials. First, we systematically evaluate the static mechanical properties and the phonon dispersion relations. We show that the two are quantitatively consistent in the long-wave…
▽ More
We propose a class of linear elastic three-dimensional metamaterials for which the effective parameters bulk modulus and mass density can be adjusted independently over a large range|which is not possible for ordinary materials. First, we systematically evaluate the static mechanical properties and the phonon dispersion relations. We show that the two are quantitatively consistent in the long-wavelength limit. To demonstrate the feasibility, corresponding fabricated polymer microstructures are presented. Finally, we discuss calculations for laminates composed of alternating layers of two different metamaterials with equal bulk modulus yet different mass density. This leads to metamaterials with effectively anisotropic uniaxial dynamic mass density tensors.
△ Less
Submitted 18 July, 2014;
originally announced July 2014.
-
Broadband terahertz generation from metamaterials
Authors:
Liang Luo,
Ioannis Chatzakis,
Jigang Wang,
Fabian B. P. Niesler,
Martin Wegener,
Thomas Koschny,
Costas M. Soukoulis
Abstract:
The terahertz spectral regime, ranging from about 0.1 to 15 THz, is one of the least explored yet most technologically transformative spectral regions. One current challenge is to develop efficient and compact terahertz emitters/detectors with a broadband and gapless spectrum that can be tailored for various pump photon energies. Here we demonstrate efficient single-cycle broadband THz generation,…
▽ More
The terahertz spectral regime, ranging from about 0.1 to 15 THz, is one of the least explored yet most technologically transformative spectral regions. One current challenge is to develop efficient and compact terahertz emitters/detectors with a broadband and gapless spectrum that can be tailored for various pump photon energies. Here we demonstrate efficient single-cycle broadband THz generation, ranging from about 0.1 to 4 THz, from a thin layer of split-ring resonators with few tens of nanometers thickness by pum** at the telecommunications wavelength of 1.5 micrometer (200 THz). The terahertz emission arises from exciting the magnetic-dipole resonance of the split-ring resonators and quickly decreases under off-resonance pum**. This, together with pump polarization dependence and power scaling of the terahertz emission, identifies the role of optically induced nonlinear currents in split-ring resonators. We also reveal a giant sheet nonlinear susceptibility $\sim$10$^{-16}$ m$^2$V$^{-1}$ that far exceeds thin films and bulk non-centrosymmetric materials.
△ Less
Submitted 20 February, 2014;
originally announced February 2014.
-
On three-dimensional dilational elastic metamaterials
Authors:
Tiemo Bückmann,
Robert Schittny,
Michael Thiel,
Muamer Kadic,
Graeme W. Milton,
Martin Wegener
Abstract:
Dilational materials are stable three-dimensional isotropic auxetics with an ultimate Poisson's ratio of -1. We design, evaluate, fabricate, and characterize crystalline metamaterials approaching this ideal. To reveal all modes, we calculate the phonon band structures. On this basis, using cubic symmetry, we can unambiguously retrieve all different non-zero elements of the rank-4 effective metamat…
▽ More
Dilational materials are stable three-dimensional isotropic auxetics with an ultimate Poisson's ratio of -1. We design, evaluate, fabricate, and characterize crystalline metamaterials approaching this ideal. To reveal all modes, we calculate the phonon band structures. On this basis, using cubic symmetry, we can unambiguously retrieve all different non-zero elements of the rank-4 effective metamaterial elasticity tensor, from which all effective elastic metamaterial properties follow. While the elastic properties and the phase velocity remain anisotropic, the effective Poisson's ratio indeed becomes isotropic and approaches -1 in the limit of small internal connections. This finding is also supported by independent static continuum-mechanics calculations. In static experiments on macroscopic polymer structures fabricated by three-dimensional printing, we measure Poisson's ratios as low as -0.8 in good agreement with theory. Microscopic samples are also presented.
△ Less
Submitted 11 October, 2013;
originally announced October 2013.
-
Elastic measurements on macroscopic three-dimensional pentamode metamaterials
Authors:
Robert Schittny,
Tiemo Bückmann,
Muamer Kadic,
Martin Wegener
Abstract:
Pentamode metamaterials approximate tailorable artificial liquids. Recently, microscopic versions of these intricate three-dimensional structures have been fabricated, but direct experimental characterization has not been possible yet. Here, using three-dimensional printing, we fabricate macroscopic polymer-based samples with many different combinations of the small connection diameter $d$ and the…
▽ More
Pentamode metamaterials approximate tailorable artificial liquids. Recently, microscopic versions of these intricate three-dimensional structures have been fabricated, but direct experimental characterization has not been possible yet. Here, using three-dimensional printing, we fabricate macroscopic polymer-based samples with many different combinations of the small connection diameter $d$ and the lattice constant $a$. Direct measurements of the static shear modulus and the Young's modulus reveal that both scale approximately according to $(d/a)^3$, in good agreement with continuum-mechanics calculations. For the smallest accessible values of $d/a \approx 1.5\%$, we find derived ratios of bulk modulus $B$ to shear modulus $G$ of $B/G \approx 1000$.
△ Less
Submitted 5 December, 2013; v1 submitted 11 October, 2013;
originally announced October 2013.
-
Experiments on transformation thermodynamics: Molding the flow of heat
Authors:
Robert Schittny,
Muamer Kadic,
Sebastien Guenneau,
Martin Wegener
Abstract:
It has recently been shown theoretically that the time-dependent heat conduction equation is form-invariant under curvilinear coordinate transformations. Thus, in analogy to transformation optics, fictitious transformed space can be mapped onto (meta-)materials with spatially inhomogeneous and anisotropic heat-conductivity tensors in the laboratory space. On this basis, we design, fabricate, and c…
▽ More
It has recently been shown theoretically that the time-dependent heat conduction equation is form-invariant under curvilinear coordinate transformations. Thus, in analogy to transformation optics, fictitious transformed space can be mapped onto (meta-)materials with spatially inhomogeneous and anisotropic heat-conductivity tensors in the laboratory space. On this basis, we design, fabricate, and characterize a micro-structured thermal cloak that molds the flow of heat around an object in a metal plate. This allows for transient protection of the object from heating, while maintaining the same downstream heat flow as without object and cloak.
△ Less
Submitted 13 May, 2013; v1 submitted 10 October, 2012;
originally announced October 2012.
-
Phonon band structures of three-dimensional pentamode metamaterials
Authors:
Aude Martin,
Muamer Kadic,
Robert Schittny,
Tiemo Bückmann,
Martin Wegener
Abstract:
Three-dimensional pentamode metamaterials are artificial solids that approximately behave like liquids, which have vanishing shear modulus. Pentamodes have recently become experimental reality. Here, we calculate their phonon band structures for various parameters. Consistent with static continuum mechanics, we find that compression and shear waves exhibit phase velocities that can realistically b…
▽ More
Three-dimensional pentamode metamaterials are artificial solids that approximately behave like liquids, which have vanishing shear modulus. Pentamodes have recently become experimental reality. Here, we calculate their phonon band structures for various parameters. Consistent with static continuum mechanics, we find that compression and shear waves exhibit phase velocities that can realistically be different by more than one order of magnitude. Interestingly, we also find frequency intervals with more than two octaves bandwidth in which pure single-mode behavior is obtained. Herein, exclusively compression waves exist due to a complete three-dimensional band gap for shear waves and, hence, no coupling to shear modes is possible. Such single-mode behavior might, e.g., be interesting for transformation-elastodynamics architectures.
△ Less
Submitted 8 October, 2012; v1 submitted 25 July, 2012;
originally announced July 2012.
-
On the feasibility of pentamode mechanical metamaterials
Authors:
Muamer Kadic,
Tiemo Bückmann,
Nicolas Stenger,
Michael Thiel,
Martin Wegener
Abstract:
Conceptually, all conceivable three-dimensional mechanical materials can be built from pentamode materials. Pentamodes also enable to implement three-dimensional transformation acoustics - the analogue of transformation optics. However, pentamodes have not been realized experimentally to the best of our knowledge. Here, we investigate inasmuch the pentamode theoretical ideal suggested by Milton an…
▽ More
Conceptually, all conceivable three-dimensional mechanical materials can be built from pentamode materials. Pentamodes also enable to implement three-dimensional transformation acoustics - the analogue of transformation optics. However, pentamodes have not been realized experimentally to the best of our knowledge. Here, we investigate inasmuch the pentamode theoretical ideal suggested by Milton and Cherkaev in 1995 can be approximated by a metamaterial with current state-of-the-art lithography. Using numerical calculations calibrated by our fabricated three-dimensional microstructures, we find that the figure of merit, i.e., the ratio of bulk modulus to shear modulus, can realistically be made as large as about 1,000.
△ Less
Submitted 6 March, 2012;
originally announced March 2012.
-
Carrier-envelope phase sensitive inversion in two-level systems
Authors:
Christian Jirauschek,
Lingze Duan,
Oliver D. Mücke,
Franz X. Kärtner,
Martin Wegener,
Uwe Morgner
Abstract:
We theoretically study the carrier-envelope phase dependent inversion generated in a two-level system by excitation with a few-cycle pulse. Based on the invariance of the inversion under time reversal of the exciting field, parameters are introduced to characterize the phase sensitivity of the induced inversion. Linear and nonlinear phase effects are numerically studied for rectangular and sinc-sh…
▽ More
We theoretically study the carrier-envelope phase dependent inversion generated in a two-level system by excitation with a few-cycle pulse. Based on the invariance of the inversion under time reversal of the exciting field, parameters are introduced to characterize the phase sensitivity of the induced inversion. Linear and nonlinear phase effects are numerically studied for rectangular and sinc-shaped pulses. Furthermore, analytical results are obtained in the limits of weak fields as well as strong dephasing, and by nearly degenerate perturbation theory for sinusoidal excitation. The results show that the phase sensitive inversion in the ideal two-level system is a promising route for constructing carrier-envelope phase detectors.
△ Less
Submitted 17 June, 2011;
originally announced June 2011.
-
Numerical Investigation of Light Scattering off Split-Ring Resonators
Authors:
S. Burger,
L. Zschiedrich,
R. Klose,
A. Schädle,
F. Schmidt,
C. Enkrich,
S. Linden,
M. Wegener,
C. M. Soukoulis
Abstract:
Recently, split ring-resonators (SRR's) have been realized experimentally in the near infrared (NIR) and optical regime. In this contribution we numerically investigate light propagation through an array of metallic SRR's in the NIR and optical regime and compare our results to experimental results.
We find numerical solutions to the time-harmonic Maxwell's equations by using advanced finite-e…
▽ More
Recently, split ring-resonators (SRR's) have been realized experimentally in the near infrared (NIR) and optical regime. In this contribution we numerically investigate light propagation through an array of metallic SRR's in the NIR and optical regime and compare our results to experimental results.
We find numerical solutions to the time-harmonic Maxwell's equations by using advanced finite-element-methods (FEM). The geometry of the problem is discretized with unstructured tetrahedral meshes. Higher order, vectorial elements (edge elements) are used as ansatz functions. Transparent boundary conditions and periodic boundary conditions are implemented, which allow to treat light scattering problems off periodic structures.
This simulation tool enables us to obtain transmission and reflection spectra of plane waves which are incident onto the SRR array under arbitrary angles of incidence, with arbitrary polarization, and with arbitrary wavelength-dependencies of the permittivity tensor. We compare the computed spectra to experimental results and investigate resonances of the system.
△ Less
Submitted 25 October, 2005;
originally announced October 2005.
-
Magnetic metamaterials at telecommunication and visible frequencies
Authors:
C. Enkrich,
M. Wegener,
S. Linden,
S. Burger,
L. Zschiedrich,
F. Schmidt,
J. F. Zhou,
Th. Koschny,
C. M. Soukoulis
Abstract:
Arrays of gold split-rings with 50-nm minimum feature size and with an LC resonance at 200-THz frequency (1500-nm wavelength) are fabricated. For normal incidence conditions, they exhibit a pronounced fundamental magnetic mode, arising from a coupling via the electric component of the incident light. For oblique incidence, a coupling via the magnetic component is demonstrated as well. Moreover,…
▽ More
Arrays of gold split-rings with 50-nm minimum feature size and with an LC resonance at 200-THz frequency (1500-nm wavelength) are fabricated. For normal incidence conditions, they exhibit a pronounced fundamental magnetic mode, arising from a coupling via the electric component of the incident light. For oblique incidence, a coupling via the magnetic component is demonstrated as well. Moreover, we identify a novel higher-order magnetic resonance at around 370 THz (800-nm wavelength) that evolves out of the Mie resonance for oblique incidence. Comparison with theory delivers good agreement and also shows that the structures allow for a negative magnetic permeability.
△ Less
Submitted 7 November, 2005; v1 submitted 29 April, 2005;
originally announced April 2005.
-
Lineshape of harmonic generation on metal nanoparticles and metallic Photonic Crystal slabs
Authors:
M. W. Klein,
T. Tritschler,
M. Wegener,
S. Linden
Abstract:
We study the linear- and nonlinear-optical lineshapes of metal nanoparticles (theory) and metallic photonic crystal slabs (experiment and theory). For metal nanoparticle ensembles, we show analytically and numerically that femtosecond second- or third-harmonic-generation (THG) experiments together with linear extinction measurements generally do not allow to determine the homogeneous linewidth.…
▽ More
We study the linear- and nonlinear-optical lineshapes of metal nanoparticles (theory) and metallic photonic crystal slabs (experiment and theory). For metal nanoparticle ensembles, we show analytically and numerically that femtosecond second- or third-harmonic-generation (THG) experiments together with linear extinction measurements generally do not allow to determine the homogeneous linewidth. This is in contrast to claims of previous work in which we identify a technical mistake. For metallic photonic crystal slabs, we introduce a simple classical model of two coupled Lorentz oscillators, corresponding to the plasmon and waveguide modes. This model describes very well the key experimental features of linear optics, particularly the Fano-like lineshapes. The derived nonlinear-optical THG spectra are shown to depend on the underlying source of the optical nonlinearity. We present corresponding THG experiments with metallic photonic crystal slabs. In contrast to previous work, we spectrally resolve the interferometric THG signal, and we additionally obtain a higher temporal resolution by using 5 fs laser pulses. In the THG spectra, the distinct spectral components exhibit strongly different behaviors versus time delay. The measured spectra agree well with the model calculations.
△ Less
Submitted 14 October, 2005; v1 submitted 11 March, 2005;
originally announced March 2005.
-
Origin of temperature dependent conductivity of $α$-polyvinylidene fluoride
Authors:
Enis Tuncer,
Michael Wegener,
Peter Frübing,
Reimund Gerhard-Multhaupt
Abstract:
The conductivity of $α$-polyvinylidene fluoride ($α$-PVDF) is obtained from dielectric measurements performed in the frequency domain at several temperatures. At temperatures above the glass-transition, the conductivity can be interpreted as an ionic conductivity, which confirms earlier results reported in the literature. Our investigation shows that the observed ionic conductivity is closely re…
▽ More
The conductivity of $α$-polyvinylidene fluoride ($α$-PVDF) is obtained from dielectric measurements performed in the frequency domain at several temperatures. At temperatures above the glass-transition, the conductivity can be interpreted as an ionic conductivity, which confirms earlier results reported in the literature. Our investigation shows that the observed ionic conductivity is closely related to the amorphous phase of the polymer.
△ Less
Submitted 22 November, 2004;
originally announced November 2004.
-
Elastic properties of highly anisotropic thin poly(propylene) foams
Authors:
Enis Tuncer,
Michael Wegener
Abstract:
In this letter, elastic properties of highly anisotropic cellular poly(propylene) films are reported. The material shows peculiar elastic properties compared to other foams in the literature. The data is displayed as the relative Young's modulus $E^*/E_s$ versus relative density $ρ^*/ρ_s$. Almost all the data from the literature are located on the region $E^*/E_s=(ρ^*/ρ_s)^n$ with $1\le n\le6$.…
▽ More
In this letter, elastic properties of highly anisotropic cellular poly(propylene) films are reported. The material shows peculiar elastic properties compared to other foams in the literature. The data is displayed as the relative Young's modulus $E^*/E_s$ versus relative density $ρ^*/ρ_s$. Almost all the data from the literature are located on the region $E^*/E_s=(ρ^*/ρ_s)^n$ with $1\le n\le6$. The introduced material on the other hand have lower relative Young's modulus at high relative densities, $n\ge6$.
△ Less
Submitted 22 November, 2004;
originally announced November 2004.
-
Distribution of relaxation times in $α$-phase polyvinylidene fluoride
Authors:
Enis Tuncer,
Michael Wegener,
Reimund Gerhard-Multhaupt
Abstract:
In this paper, a recently developed numerical method to analyze dielectric-spectroscopy data is applied to $α$-phase polyvinylidene fluoride (PVDF). The numerical procedure is non-parametric and does not contain any of the extensively used empirical formulas mentioned in the literature. The method basically recovers the unknown distribution of relaxation times of the generalized dielectric funct…
▽ More
In this paper, a recently developed numerical method to analyze dielectric-spectroscopy data is applied to $α$-phase polyvinylidene fluoride (PVDF). The numerical procedure is non-parametric and does not contain any of the extensively used empirical formulas mentioned in the literature. The method basically recovers the unknown distribution of relaxation times of the generalized dielectric function representation by simultaneous application of the Monte Carlo integration method and of the constrained least-squares optimization. The relaxation map constructed after the numerical analysis is compared to $α$-phase PVDF data presented in the literature and results of the parametric analysis with a well-known empirical formula.
△ Less
Submitted 13 September, 2004;
originally announced September 2004.
-
Modeling electromechanical properties of layered electrets: Application of the finite-element method
Authors:
Enis Tuncer,
Michael Wegener,
Reimund Gerhard-Multhaupt
Abstract:
We present calculations on the deformation of two- and three-layer electret systems. The electrical field is coupled with the stress-strain equations by means of the Maxwell stress tensor. In the simulations, two-phase systems are considered, and intrinsic relative dielectric permittivity and Young's modulus of the phases are altered. The numerically calculated electro-mechanical activity is com…
▽ More
We present calculations on the deformation of two- and three-layer electret systems. The electrical field is coupled with the stress-strain equations by means of the Maxwell stress tensor. In the simulations, two-phase systems are considered, and intrinsic relative dielectric permittivity and Young's modulus of the phases are altered. The numerically calculated electro-mechanical activity is compared to an analytical expression. Simulations are performed on two- and three-layer systems. Various parameters in the model are systematically varied and their influence on the resulting piezoelectricity is estimated. In three-layer systems with bipolar charge, the piezoelectric coefficients exhibit a strong dependence on the elastic moduli of the phases. However, with mono-polar charge, there is no significant piezoelectric effect. A two-dimensional simulation illustrated that higher piezoelectricity coefficients can be obtained for non-uniform surface charges and low Poisson's ratio of phases. Irregular structures considered exhibit low piezoelectric activity compared to two-layer structures.
△ Less
Submitted 18 June, 2004;
originally announced June 2004.
-
Elastic properties of cellular polypropylene films: Finite element simulations and their comparison with experiments
Authors:
Enis Tuncer,
Michael Wegener
Abstract:
The Young's modulus of a two-dimensional truss-like structure is simulated by using the finite element method. A power-law expression is proposed for the effective Young's modulus of the system. The obtained numerical results are compared with the experimental data of the {\em anisotropic thin cellular polypropylene films}. At high solid volume fractions ($>0.4$), the average shape of the cells…
▽ More
The Young's modulus of a two-dimensional truss-like structure is simulated by using the finite element method. A power-law expression is proposed for the effective Young's modulus of the system. The obtained numerical results are compared with the experimental data of the {\em anisotropic thin cellular polypropylene films}. At high solid volume fractions ($>0.4$), the average shape of the cells are lateral, and their dimensions have around one-to-five ratio. As the samples are inflated further, volume fraction of the solid is decreased, the average shape approach a diamond-like structure with one-to-two ratio. In addition the effective Young's modulus of the system increases. It is concluded that valuable structural information can be obtained by analyzing the experimental data and the numerical simulations, which take into account the material's micro-structural information, simultaneously.
△ Less
Submitted 7 April, 2004;
originally announced April 2004.
