-
Additive engineering for Sb$_2$S$_3$ indoor photovoltaics with efficiency exceeding 17%
Authors:
Xiao Chen,
Xiaoxuan Shu,
Jiangcheng Zhou,
Lei Wan,
Peng Xiao,
Yuchen Fu,
Junzhi Ye,
Yi-Teng Huang,
Bin Yan,
Dingjiang Xue,
Tao Chen,
Jiejie Chen,
Robert L. Z. Hoye,
Ru Zhou
Abstract:
Indoor photovoltaics (IPVs) have attracted increasing attention for sustainably powering Internet of Things (IoT) electronics. Sb$_2$S$_3$ is a promising IPV candidate material with a bandgap of ~1.75 eV, which is near the optimal value for indoor energy harvesting. However, the performance of Sb$_2$S$_3$ solar cells is limited by nonradiative recombination, closely associated with the poor-qualit…
▽ More
Indoor photovoltaics (IPVs) have attracted increasing attention for sustainably powering Internet of Things (IoT) electronics. Sb$_2$S$_3$ is a promising IPV candidate material with a bandgap of ~1.75 eV, which is near the optimal value for indoor energy harvesting. However, the performance of Sb$_2$S$_3$ solar cells is limited by nonradiative recombination, closely associated with the poor-quality absorber films. Additive engineering is an effective strategy to improved the properties of solution-processed films. This work shows that the addition of monoethanolamine (MEA) into the precursor solution allows the nucleation and growth of Sb$_2$S$_3$ films to be controlled, enabling the deposition of high-quality Sb$_2$S$_3$ absorbers with reduced grain boundary density, optimized band positions and increased carrier concentration. Complemented with computations, it is revealed that the incorporation of MEA leads to a more efficient and energetically favorable deposition for enhanced heterogeneous nucleation on the substrate, which increases the grain size and accelerates the deposition rate of Sb$_2$S$_3$ films. Due to suppressed carrier recombination and improved charge-carrier transport in Sb$_2$S$_3$ absorber films, the MEA-modulated Sb$_2$S$_3$ solar cell yields a power conversion efficiency (PCE) of 7.22% under AM1.5G illumination, and an IPV PCE of 17.55% under 1000 lux white light emitting diode (WLED) illumination, which is the highest yet reported for Sb$_2$S$_3$ IPVs. Furthermore, we construct high performance large-area Sb$_2$S$_3$ IPV modules to power IoT wireless sensors, and realize the long-term continuous recording of environmental parameters under WLED illumination in an office. This work highlights the great prospect of Sb$_2$S$_3$ photovoltaics for indoor energy harvesting.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Non-equilibrium ensemble theory for thermal transport in anharmonic crystals
Authors:
Li Wan
Abstract:
We propose an ensemble theory for the non-equilibrium statistics to study the thermal transport in anharmonic crystals. In the theory, lattice vibrations of the crystals are quantized by local Bosons(LBs), instead of Phonons as usually used for the thermal transport. LBs are driven by the temperature gradient and move from atom to atom in the crystals. Based on the LBs, anharmonic interactions bet…
▽ More
We propose an ensemble theory for the non-equilibrium statistics to study the thermal transport in anharmonic crystals. In the theory, lattice vibrations of the crystals are quantized by local Bosons(LBs), instead of Phonons as usually used for the thermal transport. LBs are driven by the temperature gradient and move from atom to atom in the crystals. Based on the LBs, anharmonic interactions between atoms in the crystals can be fully considered. To demonstrate our theory, we study the thermal transport in an atomic chain with a temperature drop applied on the two ends of the chain. We observe a Rabi-like oscillation in the transport of the LBs, from which we define the thermal current to get the thermal conductivity of the chain. Results show that the thermal conductivity is enhanced slowly with the increasing of the anharmonic interaction and decreases rapidly if the anharmonic interaction is increased further. In the present study, we only focus on the steady state, and the fluctuations of the thermal currents are not considered.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Quantum-Squeezing-Induced Point-Gap Topology and Skin Effect
Authors:
Liang-Liang Wan,
Xin-You Lü
Abstract:
We theoretically predict the squeezing-induced point-gap topology together with a {\it symmetry-protected $\mathbb{Z}_2$ skin effect} in a one-dimensional (1D) quadratic-bosonic system (QBS). Protected by a time-reversal symmetry, such a topology is associated with a novel $\mathbb{Z}_2$ invariant (similar to quantum spin-Hall insulators), which is fully capable of characterizing the occurrence of…
▽ More
We theoretically predict the squeezing-induced point-gap topology together with a {\it symmetry-protected $\mathbb{Z}_2$ skin effect} in a one-dimensional (1D) quadratic-bosonic system (QBS). Protected by a time-reversal symmetry, such a topology is associated with a novel $\mathbb{Z}_2$ invariant (similar to quantum spin-Hall insulators), which is fully capable of characterizing the occurrence of $\mathbb{Z}_2$ skin effect. Focusing on zero energy, the parameter regime of this skin effect in the phase diagram just corresponds to a {\it real-gap and point-gap coexisted topological phase}. Moreover, this phase associated with the {\it symmetry-protected $\mathbb{Z}_2$ skin effect} is experimentally observable by detecting the steady-state power spectral density. Our work is of fundamental interest in enriching non-Bloch topological physics by introducing quantum squeezing, and has potential applications for the engineering of symmetry-protected sensors based on the $\mathbb{Z}_2$ skin effect.
△ Less
Submitted 28 May, 2023; v1 submitted 21 April, 2023;
originally announced April 2023.
-
Ergodicity in glass relaxation
Authors:
Li Wan
Abstract:
We derive an equation for the glass relaxation. In the derivation, the Zwanzig-Mori projection method is not applied explicitly, which makes our equation different from the mode coupling theory. Due to the nonlinearity, it is difficult to solve the equation to get the full behaviors of the glass relaxation. But we can simplify the equation when time approaches infinity and obtain the static result…
▽ More
We derive an equation for the glass relaxation. In the derivation, the Zwanzig-Mori projection method is not applied explicitly, which makes our equation different from the mode coupling theory. Due to the nonlinearity, it is difficult to solve the equation to get the full behaviors of the glass relaxation. But we can simplify the equation when time approaches infinity and obtain the static result analytically. The static result shows that the density correlation function decays to zero finally, meaning that the glass relaxation is ergodic. In this study, we also find that the force fluctuation of one individual particle averaged in the glass is sensitive to the temperature and is suggested to be a parameter to reflect the structural transition for the glass relaxation.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Anomalous circularly polarized light emission in organic light-emitting diodes caused by orbital-momentum locking
Authors:
Li Wan,
Yizhou Liu,
Matthew J. Fuchter,
Binghai Yan
Abstract:
Chiral circularly polarized (CP) light is central to many photonic technologies, from optical communication of spin information to novel display and imaging technologies. As such, there has been significant effort in the development of chiral emissive materials that allow for the emission of strongly dissymmetric CP light from organic light-emitting diodes (OLEDs). A consensus for chiral emission…
▽ More
Chiral circularly polarized (CP) light is central to many photonic technologies, from optical communication of spin information to novel display and imaging technologies. As such, there has been significant effort in the development of chiral emissive materials that allow for the emission of strongly dissymmetric CP light from organic light-emitting diodes (OLEDs). A consensus for chiral emission in such devices is that the molecular chirality of the active layer determines the favored light handedness of CP emission, regardless of the light-emitting direction. Here, we discover that, unconventionally, oppositely propagating CP light exhibits opposite handedness, and reversing the current-flow in OLEDs also switches the handedness of the emitted CP light. This direction-dependent CP emission boosts the net polarization rate by orders of magnitude by resolving an established issue in CP-OLEDs, where the CP light reflected by the back electrode typically erodes the measured dissymmetry. Through detailed theoretical analysis, we assign this anomalous CP emission to a ubiquitous topological electronic property in chiral materials, namely the orbital-momentum locking. Our work paves the way to design new chiroptoelectronic devices and probes the close connections between chiral materials, topological electrons, and CP light in the quantum regime.
△ Less
Submitted 18 December, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Implementation of a Binary Neural Network on a Passive Array of Magnetic Tunnel Junctions
Authors:
Jonathan M. Goodwill,
Nitin Prasad,
Brian D. Hoskins,
Matthew W. Daniels,
Advait Madhavan,
Lei Wan,
Tiffany S. Santos,
Michael Tran,
Jordan A. Katine,
Patrick M. Braganca,
Mark D. Stiles,
Jabez J. McClelland
Abstract:
The increasing scale of neural networks and their growing application space have produced demand for more energy- and memory-efficient artificial-intelligence-specific hardware. Avenues to mitigate the main issue, the von Neumann bottleneck, include in-memory and near-memory architectures, as well as algorithmic approaches. Here we leverage the low-power and the inherently binary operation of magn…
▽ More
The increasing scale of neural networks and their growing application space have produced demand for more energy- and memory-efficient artificial-intelligence-specific hardware. Avenues to mitigate the main issue, the von Neumann bottleneck, include in-memory and near-memory architectures, as well as algorithmic approaches. Here we leverage the low-power and the inherently binary operation of magnetic tunnel junctions (MTJs) to demonstrate neural network hardware inference based on passive arrays of MTJs. In general, transferring a trained network model to hardware for inference is confronted by degradation in performance due to device-to-device variations, write errors, parasitic resistance, and nonidealities in the substrate. To quantify the effect of these hardware realities, we benchmark 300 unique weight matrix solutions of a 2-layer perceptron to classify the Wine dataset for both classification accuracy and write fidelity. Despite device imperfections, we achieve software-equivalent accuracy of up to 95.3 % with proper tuning of network parameters in 15 x 15 MTJ arrays having a range of device sizes. The success of this tuning process shows that new metrics are needed to characterize the performance and quality of networks reproduced in mixed signal hardware.
△ Less
Submitted 6 May, 2022; v1 submitted 16 December, 2021;
originally announced December 2021.
-
Excitations of Atomic Vibrations in Amorphous Solids
Authors:
Li Wan
Abstract:
We study excitations of atomic vibrations in the reciprocal space for amorphous solids. There are two kinds of excitations we obtained, collective excitation and local excitation. The collective excitation is the collective vibration of atoms in the amorphous solids while the local excitation is stimulated locally by a single atom vibrating in the solids. We introduce a continuous wave vector for…
▽ More
We study excitations of atomic vibrations in the reciprocal space for amorphous solids. There are two kinds of excitations we obtained, collective excitation and local excitation. The collective excitation is the collective vibration of atoms in the amorphous solids while the local excitation is stimulated locally by a single atom vibrating in the solids. We introduce a continuous wave vector for the study and transform the equations of atomic vibrations from the real space to the reciprocal space. We take the amorphous silicon as an example and calculate the structures of the excitations in the reciprocal space. Results show that an excitation is a wave packet composed of a collection of plane waves. We also find a periodical structure in the reciprocal space for the collective excitation with longitudinal vibrations, which is originated from the local order of the structure in the real space of the amorphous solid.
△ Less
Submitted 18 November, 2020;
originally announced November 2020.
-
Squeezing-induced Topological Gap Opening on Bosonic Bogoliubov Excitations
Authors:
Liang-Liang Wan,
Zixian Zhou,
Zhi-Fang Xu
Abstract:
We investigate the role of squeezing interaction in inducing topological Bogoliubov excitations of a bosonic system. We introduce a squeezing transformation which is capable of reducing the corresponding Bogoliubov-de Gennes Hamiltonian to an effective non-interacting one with the spectra and topology unchanged. In the weak interaction limit, we apply the perturbation theory to investigate the squ…
▽ More
We investigate the role of squeezing interaction in inducing topological Bogoliubov excitations of a bosonic system. We introduce a squeezing transformation which is capable of reducing the corresponding Bogoliubov-de Gennes Hamiltonian to an effective non-interacting one with the spectra and topology unchanged. In the weak interaction limit, we apply the perturbation theory to investigate the squeezing-induced topological gap opening on bosonic Bogoliubov excitations and find that the squeezing interaction plays an equivalent role as a spin-orbit or Zeeman-like coupling in the effective Hamiltonian. We thus apply this formalism to two existed models for providing deeper understandings of their topological structures. We also construct minimal models based on the elegant Clifford algebra for realizing bosonic topological Bogoliubov excitations. Our construction is potentially applicable for experiments in bosonic systems.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Immunity of nanoscale magnetic tunnel junctions to ionizing radiation
Authors:
Eric Arturo Montoya,
Jen-Ru Chen,
Randy Ngelale,
Han Kyu Lee,
Hsin-Wei Tseng,
Lei Wan,
En Yang,
Patrick Braganca,
Ozdal Boyraz,
Nader Bagherzadeh,
Mikael Nilsson,
Ilya N. Krivorotov
Abstract:
Spin transfer torque magnetic random access memory (STT-MRAM) is a promising candidate for next generation memory as it is non-volatile, fast, and has unlimited endurance. Another important aspect of STT-MRAM is that its core component, the nanoscale magnetic tunneling junction (MTJ), is thought to be radiation hard, making it attractive for space and nuclear technology applications. However, stud…
▽ More
Spin transfer torque magnetic random access memory (STT-MRAM) is a promising candidate for next generation memory as it is non-volatile, fast, and has unlimited endurance. Another important aspect of STT-MRAM is that its core component, the nanoscale magnetic tunneling junction (MTJ), is thought to be radiation hard, making it attractive for space and nuclear technology applications. However, studies of the effects of high doses of ionizing radiation on STT-MRAM writing process are lacking. Here we report measurements of the impact of high doses of gamma and neutron radiation on nanoscale MTJs with perpendicular magnetic anistropy used in STT-MRAM. We characterize the tunneling magnetoresistance, the magnetic field switching, and the current-induced switching before and after irradiation. Our results demonstrate that all these key properties of nanoscale MTJs relevant to STT-MRAM applications are robust against ionizing radiation. Additionally, we perform experiments on thermally driven stochastic switching in the gamma ray environment. These results indicate that nanoscale MTJs are promising building blocks for radiation-hard non-von Neumann computing.
△ Less
Submitted 25 September, 2019;
originally announced September 2019.
-
Topological Classification of Excitations in Quadratic Bosonic Systems
Authors:
Zixian Zhou,
Liang-Liang Wan,
Zhi-Fang Xu
Abstract:
We investigate the topological classification of excitations in quadratic bosonic systems with an excitation band gap. Time-reversal, charge-conjugation, and parity symmetries in bosonic systems are introduced to realize a ten-fold symmetry classification. We find a specific decomposition of the quadratic bosonic Hamiltonian and use it to prove that each quadratic bosonic system is homotopic to a…
▽ More
We investigate the topological classification of excitations in quadratic bosonic systems with an excitation band gap. Time-reversal, charge-conjugation, and parity symmetries in bosonic systems are introduced to realize a ten-fold symmetry classification. We find a specific decomposition of the quadratic bosonic Hamiltonian and use it to prove that each quadratic bosonic system is homotopic to a direct sum of two single-particle subsystems. The topological classification table is thus derived via inheriting from that of Atland-Zirnbauer classes and unique topological phases of bosons are predicted. Finally, concrete topological models are proposed to demonstrate the peculiarity of bosonic excitations.
△ Less
Submitted 20 September, 2020; v1 submitted 20 May, 2019;
originally announced May 2019.
-
Poisson-Boltzmann Equation with a Random Field for Charged Fluids
Authors:
Li Wan,
Ning-Hua Tong
Abstract:
The classical Poisson-Boltzmann equation (CPBE), which is a mean field theory by averaging the ion fluctuation, has been widely used to study ion distributions in charged fluids. In this study, we derive a modified Poisson-Boltzmann equation with a random field from the field theory and recover the ion fluctuation through a multiplicative noise added in the CPBE. The Poisson-Boltzmann equation wit…
▽ More
The classical Poisson-Boltzmann equation (CPBE), which is a mean field theory by averaging the ion fluctuation, has been widely used to study ion distributions in charged fluids. In this study, we derive a modified Poisson-Boltzmann equation with a random field from the field theory and recover the ion fluctuation through a multiplicative noise added in the CPBE. The Poisson-Boltzmann equation with a random field (RFPBE) captures the effect of the ion fluctuation and gives different ion distributions in the charged fluids compared to the CPBE. To solve the RFPBE, we propose a Monte Carlo method based on the path integral representation. Numerical results show that the effect of the ion fluctuation strengthens the ion diffusion into the domain and intends to distribute the ions in the fluid uniformly. The final ion distribution in the fluid is determined by the competition between the ion fluctuation and the electrostatic forces exerted by the boundaries. The RFPBE is general and feasible for high dimensional systems by taking the advantage of the Monte Carlo method. We use the RFPBE to study a two dimensional system as an example, in which the effect of ion fluctuation is clearly captured.
△ Less
Submitted 4 July, 2019; v1 submitted 15 November, 2018;
originally announced November 2018.
-
Hydrogen embrittlement controlled by reaction of dislocation with grain boundary in alpha-iron
Authors:
Liang Wan,
Wen Tong Geng,
Akio Ishii,
Jun-** Du,
Nobuyuki Ishikawa,
Hajime Kimizuka,
Shigenobu Ogata
Abstract:
Hydrogen atoms absorbed by metals in the hydrogen-containing environments can lead to the premature fracture of the metal components used in load-bearing conditions. Since metals used in practice are mostly polycrystalline, grain boundaries (GBs) can play an important role in hydrogen embrittlement of metals. Here we show that the reaction of GB with lattice dislocations is a key component in hydr…
▽ More
Hydrogen atoms absorbed by metals in the hydrogen-containing environments can lead to the premature fracture of the metal components used in load-bearing conditions. Since metals used in practice are mostly polycrystalline, grain boundaries (GBs) can play an important role in hydrogen embrittlement of metals. Here we show that the reaction of GB with lattice dislocations is a key component in hydrogen embrittlement mechanism for polycrystalline metals. We use atomistic modeling methods to investigate the mechanical response of GBs in alpha-iron with various hydrogen concentrations. Analysis indicates that dislocations im**ement and emission on the GB cause the GB to locally transform into an activated state with a more disordered atomistic structure, and introduce a local stress concentration. The activation of the GB segregated with hydrogen atoms can greatly facilitate decohesion of the GB. We show that the hydrogen embrittlement model proposed here can give better explanation of many experimental observations.
△ Less
Submitted 13 September, 2018; v1 submitted 1 March, 2018;
originally announced March 2018.
-
Hybrid Interference Induced Flat Band Localization in Bipartite Optomechanical Lattices
Authors:
Liang-Liang Wan,
Xin-You Lü,
**-Hua Gao,
Ying Wu
Abstract:
The flat band localization, as an important phenomenon in solid state physics, is fundamentally interesting in the exploration of exotic ground property of many-body system. Here we demonstrate the appearance of a flat band in a general bipartite optomechanical lattice, which could have one or two dimensional framework. Physically, it is induced by the hybrid interference between the photon and ph…
▽ More
The flat band localization, as an important phenomenon in solid state physics, is fundamentally interesting in the exploration of exotic ground property of many-body system. Here we demonstrate the appearance of a flat band in a general bipartite optomechanical lattice, which could have one or two dimensional framework. Physically, it is induced by the hybrid interference between the photon and phonon modes in optomechanical lattice, which is quite different from the destructive interference resulted from the special geometry structure in the normal lattice (e.g., Lieb lattice). Moreover, this novel flat band is controllable and features a special local density of states (LDOS) pattern, which makes it is detectable in experiments. This work offers an alternative approach to control the flat band localization with optomechanical interaction, which may substantially advance the fields of cavity optomechanics and solid state physics.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Large Deviations for Chiral Transition through Path Integral
Authors:
Li Wan,
Yunmi Huang,
Xiaoshan Zhu
Abstract:
An noise-induced mechanism has been revealed by some authors recently for the homochirality in a chiral system. Motivated by such stochastic process, we study the noise-induced transition in the system. The chiral transition, say the transition between chiral states, is impossible in the deterministic view if the homochirality has been converged, but is a rare event when noise is involved. We stud…
▽ More
An noise-induced mechanism has been revealed by some authors recently for the homochirality in a chiral system. Motivated by such stochastic process, we study the noise-induced transition in the system. The chiral transition, say the transition between chiral states, is impossible in the deterministic view if the homochirality has been converged, but is a rare event when noise is involved. We study the rare event by using the large deviation theory (LDT) and figure out the LDT rate functional for the transition probability through the Doi-Peliti second quantization path integral method. In order to check the correctness of our work, we have derived the Langevin equations through the path integral method by using the Hubbard-Stratonovich transformation, and recover the equations reported by other authors through a different method.
△ Less
Submitted 30 June, 2017;
originally announced June 2017.
-
Photoinduced valley-polarized current of layered MoS2 by electric tuning
Authors:
Yun** Yu,
Yanfeng Zhou,
Langhui Wan,
Bin Wang,
Fuming Xu,
Yadong Wei,
Jian Wang
Abstract:
A photoinduced current of a layered MoS2-based transistor is studied from first-principles. Under the illumination of circular polarized light, a valley-polarized current is generated, which can be tuned by the gate voltage. For monolayer MoS2, the valley-polarized spin-up (down) electron current at K (K') points is induced by the right (left) circular polarized light. The valley polarization is f…
▽ More
A photoinduced current of a layered MoS2-based transistor is studied from first-principles. Under the illumination of circular polarized light, a valley-polarized current is generated, which can be tuned by the gate voltage. For monolayer MoS2, the valley-polarized spin-up (down) electron current at K (K') points is induced by the right (left) circular polarized light. The valley polarization is found to reach +1.0 (-1.0) for the valley current that carried such a K (K') index. For bilayer MoS2, the spin-up (down) current can be induced at both K and K' valleys by the right (left) circular light. In contrast to monolayer MoS2, the photoinduced valley polarization shows asymmetric behavior upon reversal of the gate voltage. Our results show that the valley polarization of the photoinduced current can be modulated by the circular polarized light and the gate voltage. All the results can be well understood using a simple kp model.
△ Less
Submitted 5 January, 2017;
originally announced January 2017.
-
Slip length of confined liquid with small roughness of solid-liquid interfaces
Authors:
Li Wan,
Yunmi Huang
Abstract:
We have studied the slip length of confined liquid with small roughness of solid-liquid interfaces. Dyadic Green function and perturbation expansion have been applied to get the slip length quantitatively. In the slip length, both effects of the roughness of the interfaces and the chemical interaction between the liquid and the solid surface are involved. For the numerical calculation, Monte Carlo…
▽ More
We have studied the slip length of confined liquid with small roughness of solid-liquid interfaces. Dyadic Green function and perturbation expansion have been applied to get the slip length quantitatively. In the slip length, both effects of the roughness of the interfaces and the chemical interaction between the liquid and the solid surface are involved. For the numerical calculation, Monte Carlo method has been used to simulate the rough interfaces and the physical quantities are obtained statistically over the interfaces. Results show that the total slip length of the system is linearly proportional to the slip length contributed from the chemical interaction. And the roughness of the interfaces plays its role as the proportionality factor. For the roughness, the variance of the roughness decreases the total slip length while the correlation length of the roughness can enhance the slip length dramatically to a saturation value.
△ Less
Submitted 2 January, 2017;
originally announced January 2017.
-
Impurity-Induced Environmental Quantum Phase Transitions in the Quadratic-Coupling Spin-Boson Model
Authors:
Da-Chuan Zheng,
Li Wan,
Ning-Hua Tong
Abstract:
We study the zero temperature properties of the sub-Ohmic spin-boson model with quadratic spin-boson coupling. This model describes experimental set ups at the optimal working point where the linear-coupling between the qubit (spin) and the environmental noise (bosons) is zero and the leading coupling is quadratic. In the strong coupling regime, we find that the existence of spin induces quantum p…
▽ More
We study the zero temperature properties of the sub-Ohmic spin-boson model with quadratic spin-boson coupling. This model describes experimental set ups at the optimal working point where the linear-coupling between the qubit (spin) and the environmental noise (bosons) is zero and the leading coupling is quadratic. In the strong coupling regime, we find that the existence of spin induces quantum phase transitions (QPTs) between two states of environment: the normal state and a state with local distortions. The phase diagram contains both continuous and the first-order QPTs, with non-trivial critical properties obtained exactly. At the QPTs, the equilibrium state spin dynamics bears power-law $ω$ dependence in the small frequency limit and a robust coherent Rabi oscillation at high frequency. We discuss the feasibility of observing such environmental QPTs in the qubit-related experiments.
△ Less
Submitted 16 November, 2018; v1 submitted 30 December, 2016;
originally announced December 2016.
-
Age-dependent Size Effect and Fracture Characteristics of Ultra High Performance Concrete
Authors:
Lin Wan,
Roman Wendner,
Gianluca Cusatis
Abstract:
This paper presents an investigation of the age-dependent size effect and fracture characteristics of an ultra high performance concrete (UHPC). The study is based on a unique set of experimental data connecting aging tests for two curing protocols of one size and scaled size effect tests of one age. Both aging and size effect studies are performed on notched three point bending tests. Experimenta…
▽ More
This paper presents an investigation of the age-dependent size effect and fracture characteristics of an ultra high performance concrete (UHPC). The study is based on a unique set of experimental data connecting aging tests for two curing protocols of one size and scaled size effect tests of one age. Both aging and size effect studies are performed on notched three point bending tests. Experimental data is augmented by state of the art simulations employing a recently developed discrete element based early-age computational framework. The framework is constructed by coupling a hygro-thermo-chemical (HTC) model and the Lattice Discrete Particle Model (LDPM) through a set of aging functions. The HTC component allows taking into account variable curing conditions and predicts the maturity of concrete. The mechanical component, LDPM, simulates the failure behavior of concrete at the length scale of major heterogeneities. After careful calibration and validation the mesoscale HTC-LDPM model is uniquely posed to perform predictive simulations. The ultimate flexural strengths from experiments and simulations are analyzed by the cohesive size effect curve (CSEC) method, and the classical size effect law (SEL). The fracture energies obtained by LDPM, CSEC, SEL, and cohesive crack analyses are compared and an aging formulation for fracture properties is proposed. Based on experiments, simulations, and size effect analyses, the age-dependence of size effect and the robustness of analytical size effect methods are evaluated.
△ Less
Submitted 14 September, 2016; v1 submitted 31 August, 2016;
originally announced August 2016.
-
Iso-electric point of fluid
Authors:
Li Wan
Abstract:
Iso-electric point(IEP) is the PH, at which the $ζ$ potential is measured to be zero. The occurrence of IEP has been understood due to the neutralization of surface charge density (SCD) at the solid-liquid interface. In this work, we use the potential trap model to study the sources of the surface charge density at verious PC and PH, by taking the water-silica system as an example. It is revealed…
▽ More
Iso-electric point(IEP) is the PH, at which the $ζ$ potential is measured to be zero. The occurrence of IEP has been understood due to the neutralization of surface charge density (SCD) at the solid-liquid interface. In this work, we use the potential trap model to study the sources of the surface charge density at verious PC and PH, by taking the water-silica system as an example. It is revealed that in the case of $PH<8$, the SCD is mainly originated from the dissociation of water molecules. And the bulk ions trapped at the interface can dominate the SCD when $PH>9$. Due to the mass action law, the dissociation of water molecules is suppressed at the PH close to IEP, leading to a zero surface charge density. In this way, zero $ζ$ potential is obtained at the IEP. It has also been obtained that the increase of the salt concentration in the water can decrease the $ζ$ potential, but increase the surface charge density.
△ Less
Submitted 11 May, 2016;
originally announced May 2016.
-
Quantum noise theory for phonon transport through nanostructures
Authors:
Li Wan,
Yunmi Huang,
Changcheng Huang
Abstract:
We have developed a quantum noise approach to study the phonon transport through nanostructures. The nanostructures acting as phonon channels are attached to two phonon reservoirs. And the temperature drop between the two reservoirs drives the phonon transport through the channels. We have derived a quantum Langevin equation(QLE) to describe the phonon transport with the quantum noise originated f…
▽ More
We have developed a quantum noise approach to study the phonon transport through nanostructures. The nanostructures acting as phonon channels are attached to two phonon reservoirs. And the temperature drop between the two reservoirs drives the phonon transport through the channels. We have derived a quantum Langevin equation(QLE) to describe the phonon transport with the quantum noise originated from the thermal fluctuation of the reservoirs. Within the Markov approximation, the QLE is used to get the thermal conductivity $κ$ of the nanostructures and the finite size effect of the $κ$ then is studied. In this study, the advantage of the quantum noise approach lays on the fact that no any local temperature needs to be defined for the nanostructures in its non-equilibrium state.
△ Less
Submitted 5 April, 2016;
originally announced April 2016.
-
The Poisson Boltzmann equation and the charge separation phenomenon at the silica-water interface: A holistic approach
Authors:
Maijia Liao,
Li Wan,
Shixin Xu,
Chun Liu,
** Sheng
Abstract:
The Poisson Boltzmann equation is known for its success in describing the Debye layer that arises from the charge separation phenomenon at the silica/water interface. However, by treating only the mobile ionic charges in the liquid, the Poisson Boltzmann equation accounts for only half of the electrical double layer, with the other half, the surface charge layer, being beyond its computational dom…
▽ More
The Poisson Boltzmann equation is known for its success in describing the Debye layer that arises from the charge separation phenomenon at the silica/water interface. However, by treating only the mobile ionic charges in the liquid, the Poisson Boltzmann equation accounts for only half of the electrical double layer, with the other half, the surface charge layer, being beyond its computational domain. In this work, we take a holistic approach to the charge separation phenomenon at the silica/water interface by treating, within a single computational domain, the electrical double layer that comprises both the mobile ions in the liquid and the surface charge density. The Poisson Nernst Planck equations are used as the rigorous basis for our methodology. The holistic approach has the advantage of being able to predict surface charge variations that arise either from the addition of salt and acid to the liquid, or from the decrease of the liquid channel width to below twice the Debye length. As the electrical double layer must be overall neutral, we use this constraint to derive both the form of the static limit of the Poisson Nernst Planck equations, as well as a global chemical potential that replaces the classical zeta potential as the boundary value for the PB equation, which can be re-derived from our formalism. We present several predictions of our theory that are beyond the framework of the PB equation alone, e.g., the surface capacitance and the so-called pK and pL values, the isoelectronic point at which the surface charge layer is neutralized, and the appearance of a Donnan potential that arises from the formation of an electrical double layer at the inlet regions of a nano-channel connected to the bulk reservoir. All theory predictions are shown to be in good agreement with the experimental observations.
△ Less
Submitted 22 March, 2016; v1 submitted 8 January, 2016;
originally announced January 2016.
-
A Novel Material for In Situ Construction on Mars: Experiments and Numerical Simulations
Authors:
Lin Wan,
Roman Wendner,
Gianluca Cusatis
Abstract:
A significant step in space exploration during the 21st century will be human settlement on Mars. Instead of transporting all the construction materials from Earth to the red planet with incredibly high cost, using Martian soil to construct a site on Mars is a superior choice. Knowing that Mars has long been considered a "sulfur-rich planet", a new construction material composed of simulated Marti…
▽ More
A significant step in space exploration during the 21st century will be human settlement on Mars. Instead of transporting all the construction materials from Earth to the red planet with incredibly high cost, using Martian soil to construct a site on Mars is a superior choice. Knowing that Mars has long been considered a "sulfur-rich planet", a new construction material composed of simulated Martian soil and molten sulfur is developed. In addition to the raw material availability for producing sulfur concrete and a strength reaching similar or higher levels of conventional cementitious concrete, fast curing, low temperature sustainability, acid and salt environment resistance, 100% recyclability are appealing superior characteristics of the developed Martian Concrete. In this study, different percentages of sulfur are investigated to obtain the optimal mixing proportions. Three point bending, unconfined compression and splitting tests were conducted to determine strength development, strength variability, and failure mechanisms. The test results show that the strength of Martian Concrete doubles that of sulfur concrete utilizing regular sand. It is also shown that the particle size distribution plays an important role in the mixture's final strength. Furthermore, since Martian soil is metal rich, sulfates and, potentially, polysulfates are also formed during high temperature mixing, which might contribute to the high strength. The optimal mix developed as Martian Concrete has an unconfined compressive strength of above 50 MPa. The formulated Martian Concrete is simulated by the Lattice Discrete Particle Model (LDPM), which exhibits excellent ability in modeling the material response under various loading conditions.
△ Less
Submitted 12 August, 2016; v1 submitted 16 December, 2015;
originally announced December 2015.
-
Analysis of the Behavior of Ultra High Performance Concrete at Early Age
Authors:
Lin Wan,
Roman Wendner,
Benliang Liang,
Gianluca Cusatis
Abstract:
Ultra high performance concretes (UHPCs) are cementitious composite materials with high level of perfor- mance characterized by high compressive strength, high tensile strength and superior durability, reached by low water-to-binder ratio, optimized aggregate size distribution, thermal activation, and fiber reinforcement. In the past couple of decades, more and more UHPCs have been developed and f…
▽ More
Ultra high performance concretes (UHPCs) are cementitious composite materials with high level of perfor- mance characterized by high compressive strength, high tensile strength and superior durability, reached by low water-to-binder ratio, optimized aggregate size distribution, thermal activation, and fiber reinforcement. In the past couple of decades, more and more UHPCs have been developed and found their ways into practice. Thus, the demand for computational models capable of describing and predicting relevant aging phenomena to assist design and planning is increasing. This paper presents the early age experimental characterization as well as the results of subsequent simulations of a typical UHPC matrix. Performed and simulated tests include unconfined compression, splitting (Brazilian), and three-point-bending tests. The computational framework is formulated by coupling a hygro-thermo-chemical (HTC) theory and a comprehensive mesoscale discrete model with formulated aging functions. The HTC component allows taking into account various types of curing conditions with varying temperature and relative humidity and predicting the level of concrete aging. The mechanical component, the Lattice Discrete Particle Model (LDPM), permits the simulation of the failure behavior of concrete at the length scale of major heterogeneities. The aging functions relate the mesoscale LDPM mechanical properties in terms of aging degree, defined in this work as the ratio between the quasi-static elastic modulus at a certain age and its asymptotic value. The obtained results provide insights in both UHPC early age mechanisms and a computational model for the analysis of aging UHPC structures.
△ Less
Submitted 19 September, 2016; v1 submitted 25 September, 2015;
originally announced September 2015.
-
Finite Size Effects of Thermal Conductivity for One-Dimensional Mesoscopic Systems
Authors:
Li Wan
Abstract:
The finite size effects of the thermal conductivity $κ$ have been studied in the phonon space. It is found that only a few phonon modes are selected to take part in the thermal transport when the size $L$ of the system is decreased. The amount of the selected phonon modes is proportional to the $L$. In this way, $κ$ decreases with the decreasing of $L$. Such mechanism for the size effect of $κ$ fo…
▽ More
The finite size effects of the thermal conductivity $κ$ have been studied in the phonon space. It is found that only a few phonon modes are selected to take part in the thermal transport when the size $L$ of the system is decreased. The amount of the selected phonon modes is proportional to the $L$. In this way, $κ$ decreases with the decreasing of $L$. Such mechanism for the size effect of $κ$ found in this work is beyond the Phonon-Boundary scattering. The exponent $α$ of the power law $κ\sim L^α$ has been fitted, showing that the exponent is not universal.
△ Less
Submitted 20 April, 2016; v1 submitted 14 June, 2015;
originally announced June 2015.
-
Bit Patterned Magnetic Recording: Theory, Media Fabrication, and Recording Performance
Authors:
Thomas R. Albrecht,
Hitesh Arora,
Vipin Ayanoor-Vitikkate,
Jean-Marc Beaujour,
Daniel Bedau,
David Berman,
Alexei L. Bogdanov,
Yves-Andre Chapuis,
Julia Cushen,
Elizabeth E. Dobisz,
Gregory Doerk,
He Gao,
Michael Grobis,
Bruce Gurney,
Weldon Hanson,
Olav Hellwig,
Toshiki Hirano,
Pierre-Olivier Jubert,
Dan Kercher,
Jeffrey Lille,
Zuwei Liu,
C. Mathew Mate,
Yuri Obukhov,
Kanaiyalal C. Patel,
Kurt Rubin
, et al. (6 additional authors not shown)
Abstract:
Bit Patterned Media (BPM) for magnetic recording provide a route to densities $>1 Tb/in^2$ and circumvents many of the challenges associated with conventional granular media technology. Instead of recording a bit on an ensemble of random grains, BPM uses an array of lithographically defined isolated magnetic islands, each of which stores one bit. Fabrication of BPM is viewed as the greatest challe…
▽ More
Bit Patterned Media (BPM) for magnetic recording provide a route to densities $>1 Tb/in^2$ and circumvents many of the challenges associated with conventional granular media technology. Instead of recording a bit on an ensemble of random grains, BPM uses an array of lithographically defined isolated magnetic islands, each of which stores one bit. Fabrication of BPM is viewed as the greatest challenge for its commercialization. In this article we describe a BPM fabrication method which combines e-beam lithography, directed self-assembly of block copolymers, self-aligned double patterning, nanoimprint lithography, and ion milling to generate BPM based on CoCrPt alloys. This combination of fabrication technologies achieves feature sizes of $<10 nm$, significantly smaller than what conventional semiconductor nanofabrication methods can achieve. In contrast to earlier work which used hexagonal close-packed arrays of round islands, our latest approach creates BPM with rectangular bitcells, which are advantageous for integration with existing hard disk drive technology. The advantages of rectangular bits are analyzed from a theoretical and modeling point of view, and system integration requirements such as servo patterns, implementation of write synchronization, and providing for a stable head-disk interface are addressed in the context of experimental results. Optimization of magnetic alloy materials for thermal stability, writeability, and switching field distribution is discussed, and a new method for growing BPM islands on a patterned template is presented. New recording results at $1.6 Td/in^2$ (teradot/inch${}^2$, roughly equivalent to $1.3 Tb/in^2$) demonstrate a raw error rate $<10^{-2}$, which is consistent with the recording system requirements of modern hard drives. Extendibility of BPM to higher densities, and its eventual combination with energy assisted recording are explored.
△ Less
Submitted 19 March, 2015;
originally announced March 2015.
-
Shot noise of spin current and spin transfer torque
Authors:
Yun** Yu,
Hongxin Zhan,
Langhui Wan,
Bin Wang,
Yadong Wei,
Qingfeng Sun,
Jian Wang
Abstract:
We report the theoretical investigation of noise spectrum of spin current and spin transfer torque for non-colinear spin polarized transport in a spin-valve device which consists of normal scattering region connected by two ferromagnetic electrodes. Our theory was developed using non-equilibrium Green's function method and general non-linear $S^σ-V$ and $S^τ-V$ relations were derived as a function…
▽ More
We report the theoretical investigation of noise spectrum of spin current and spin transfer torque for non-colinear spin polarized transport in a spin-valve device which consists of normal scattering region connected by two ferromagnetic electrodes. Our theory was developed using non-equilibrium Green's function method and general non-linear $S^σ-V$ and $S^τ-V$ relations were derived as a function of angle $θ$ between magnetization of two leads. We have applied our theory to a quantum dot system with a resonant level coupled with two ferromagnetic electrodes. It was found that for the MNM system, the auto-correlation of spin current is enough to characterize the fluctuation of spin current. For a system with three ferromagnetic layers, however, both auto-correlation and cross-correlation of spin current are needed to characterize the noise spectrum of spin current. Furthermore, the spin transfer torque and the torque noise were studied for the MNM system. For a quantum dot with a resonant level, the derivative of spin torque with respect to bias voltage is proportional to $\sinθ$ when the system is far away from the resonance. When the system is near the resonance, the spin transfer torque becomes non-sinusoidal function of $θ$. The derivative of noise spectrum of spin transfer torque with respect to the bias voltage $N_τ$ behaves differently when the system is near or far away from the resonance. Specifically, the differential shot noise of spin transfer torque $N_τ$ is a concave function of $θ$ near the resonance while it becomes convex function of $θ$ far away from resonance. For certain bias voltages, the period $N_τ(θ)$ becomes $π$ instead of $2π$. For small $θ$, it was found that the differential shot noise of spin transfer torque is very sensitive to the bias voltage and the other system parameters.
△ Less
Submitted 21 December, 2012;
originally announced December 2012.
-
Fracture Strength of AlLiB14
Authors:
S P Beckman,
L F Wan
Abstract:
The orthorhombic boride crystal family XYB$_{14}$, where X and Y are metal atoms, plays a critical role in a unique class of superhard compounds, yet there have been no studies aimed at understanding the origin of the mechanical strength of this compound. We present here the results from a comprehensive investigation into the fracture strength of the archetypal AlLiB$_{14}$ crystal. First-principl…
▽ More
The orthorhombic boride crystal family XYB$_{14}$, where X and Y are metal atoms, plays a critical role in a unique class of superhard compounds, yet there have been no studies aimed at understanding the origin of the mechanical strength of this compound. We present here the results from a comprehensive investigation into the fracture strength of the archetypal AlLiB$_{14}$ crystal. First-principles, \textit{ab initio}, methods are used to determine the ideal brittle cleavage strength for several high-symmetry orientations. The elastic tensor and the orientation-dependent Young's modulus are calculated. From these results the lower bound fracture strength of AlLiB$_{14}$ is predicted to be between 29 and 31 GPa, which is near the measured hardness reported in the literature. These results indicate that the intrinsic strength of AlLiB$_{14}$ is limited by the interatomic B--B bonds that span between the B layers.
△ Less
Submitted 29 September, 2012;
originally announced October 2012.
-
Effective Hamiltonian Methods for Predicting the Electrocaloric Behavior of BaTiO3
Authors:
S. P. Beckman,
L. F. Wan,
Jordan A. Barr,
Takeshi Nishimatsu
Abstract:
The perovskite crystal BaTiO3 is modeled using a first-principles based effective Hamiltonian and molecular dynamics simulations are performed to estimate the pyroelectric response. The electrocaloric temperature change, \DeltaT, is calculated for different temperatures and externally applied electric fields. It is found that it is possible to achieve a large \DeltaT, around 5-6 K, for a relativel…
▽ More
The perovskite crystal BaTiO3 is modeled using a first-principles based effective Hamiltonian and molecular dynamics simulations are performed to estimate the pyroelectric response. The electrocaloric temperature change, \DeltaT, is calculated for different temperatures and externally applied electric fields. It is found that it is possible to achieve a large \DeltaT, around 5-6 K, for a relatively small electric field gradient, less than 100 kV/cm, if the applied fields have a small absolute magnitude.
△ Less
Submitted 28 August, 2012;
originally announced August 2012.
-
A new method to find full complex roots of a complex dispersion equation for light propagation
Authors:
Li Wan
Abstract:
A new numerical method is presented to find full complex roots of a complex dispersion equation. For the application of the solution, the complex dispersion equation of a cylindrical metallic nanowire is investigated. By using this method, locus of Brewster angle, complex dispersion curves of Surface Plasmon Polaritons (SPPs) and complex bulk modes can be obtained in once calculation. Approximate…
▽ More
A new numerical method is presented to find full complex roots of a complex dispersion equation. For the application of the solution, the complex dispersion equation of a cylindrical metallic nanowire is investigated. By using this method, locus of Brewster angle, complex dispersion curves of Surface Plasmon Polaritons (SPPs) and complex bulk modes can be obtained in once calculation. Approximate analytical solution to the complex dispersion equation has also been derived to verify our method.
△ Less
Submitted 30 August, 2011;
originally announced September 2011.
-
Analytical solutions to zeroth-order dispersion relations of a cylindrical metallic nanowire
Authors:
Li Wan,
Yun-Mi Huang,
Chang-Kun Dong,
Hai-Jun Luo
Abstract:
Zeroth-order complex dispersion relations of a cylindrical metallic nanowire have been solved out analytically with approximate methods. The analytical solutions are valid for the sections of the dispersion relations whose frequencies are close to the Surface Plasmon frequency. The back bending of the Surface Plasmon-Polaritons(SPPs) can be well described by the analytical solutions, confirming th…
▽ More
Zeroth-order complex dispersion relations of a cylindrical metallic nanowire have been solved out analytically with approximate methods. The analytical solutions are valid for the sections of the dispersion relations whose frequencies are close to the Surface Plasmon frequency. The back bending of the Surface Plasmon-Polaritons(SPPs) can be well described by the analytical solutions, confirming that the back bending is originated from the metal Ohmic loss. The utility of the back bending point in the dispersion relation for the measurement of the metallic Ohimc loss has also been suggested.
△ Less
Submitted 24 August, 2011;
originally announced August 2011.
-
Electron transport through Al-ZnO-Al: an {\it ab initio} calculation
Authors:
Zijiang Yang,
Langhui Wan,
Yun** Yu,
Yadong Wei,
Jian Wang
Abstract:
The electron transport properties of ZnO nano-wires coupled by two aluminium electrodes were studied by {\it ab initio} method based on non-equilibrium Green's function approach and density functional theory. A clearly rectifying current-voltage characteristics was observed. It was found that the contact interfaces between Al-O and Al-Zn play important roles in the charge transport at low bias vol…
▽ More
The electron transport properties of ZnO nano-wires coupled by two aluminium electrodes were studied by {\it ab initio} method based on non-equilibrium Green's function approach and density functional theory. A clearly rectifying current-voltage characteristics was observed. It was found that the contact interfaces between Al-O and Al-Zn play important roles in the charge transport at low bias voltage and give very asymmetric I-V characteristics. When the bias voltage increases, the negative differential resistance occurs at negative bias voltage. The charge accumulation was calculated and its behavior was found to be well correlated with the I-V characteristics. We have also calculated the electrochemical capacitance which exhibits three plateaus at different bias voltages which may have potential device application.
△ Less
Submitted 18 March, 2010;
originally announced March 2010.
-
Visualizing high-temperature spin dynamics in La1-xCaxMnO3 from a map** of EPR linewidth and g factor
Authors:
Y. Liu,
S. L. Wan,
X. G. Li
Abstract:
This paper presents an analysis of electron paramagnetic resonance parameters, i.e., g factor, linewidth, and intensity on powder samples of La1-xCaxMnO3 at the commensurate carrier concentrations of x = N/8 (N = 1, 2, 3, 4, 5, 6, and 7). We demonstrate that the map** of EPR parameters offers a powerful tool to investigate high-temperature spin dynamics in the phase diagram of colossal magneto…
▽ More
This paper presents an analysis of electron paramagnetic resonance parameters, i.e., g factor, linewidth, and intensity on powder samples of La1-xCaxMnO3 at the commensurate carrier concentrations of x = N/8 (N = 1, 2, 3, 4, 5, 6, and 7). We demonstrate that the map** of EPR parameters offers a powerful tool to investigate high-temperature spin dynamics in the phase diagram of colossal magnetoresistance (CMR) manganites. Our results convince that the spin-spin relaxation mechanism should dominate the high-temperature paramagnetic regime in CMR manganites.
△ Less
Submitted 28 March, 2006; v1 submitted 27 March, 2006;
originally announced March 2006.
-
Paraconductivity and magnetoconductivity approaches to superconducting fluctuations in La1.6-xNd0.4SrxCuO4 films
Authors:
Y. Liu,
S. L. Wan,
X. G. Li
Abstract:
This paper presents an analysis of superconducting fluctuations in the c-axis oriented La1.6-xNd0.4SrxCuO4 films by the paraconductivity and magnetoconductivity approaches.
This paper presents an analysis of superconducting fluctuations in the c-axis oriented La1.6-xNd0.4SrxCuO4 films by the paraconductivity and magnetoconductivity approaches.
△ Less
Submitted 8 February, 2006;
originally announced February 2006.