-
Accessing the Free Expansion and Melting of a Crystalline Drop of Charged Colloidal Spheres in a Particle-Free Environment by Optical Experiments
Authors:
Marcus Witt,
G. H. Philipp Nguyen,
Josefine R. von Puttkamer-Luerssen,
Can H. Yilderim,
Johannes A. B. Wagner,
Ebrahim Malek,
Sabrina Juretzka,
Jorge L. Meyrelles Jr.,
Maximilan Hofmann,
Hartmut Löwen,
Thomas Palberg
Abstract:
We address crystals of non-attractive colloidal spheres freely expanding into particle-free environ-ments and melting during dilution. This problem has been studied in two dimensions, both numeri-cally and in experiments on colloidal model crystals. Here, we place three-dimensional drops of aqueous colloidal charged sphere suspensions in a colloid-free, deionized aqueous environment. Initially in…
▽ More
We address crystals of non-attractive colloidal spheres freely expanding into particle-free environ-ments and melting during dilution. This problem has been studied in two dimensions, both numeri-cally and in experiments on colloidal model crystals. Here, we place three-dimensional drops of aqueous colloidal charged sphere suspensions in a colloid-free, deionized aqueous environment. Initially in a shear-molten state, they rapidly crystallize to a fine-grained polycrystalline material of body centred cubic structure. They stabilize their spherical shape within a few seconds. We over-come the challenges provided by drop turbidity and use a combination of optical methods to follow the drop evolution. The crystal ball shows a nearly fourfold increase of the volume followed by slow shrinkage due to melting, which is nearly linear in time. Exploiting coherent multiple-scattering by (110) Bragg reflecting crystals, time-dependent density profiles were recorded within the drop interior. These show a continuously flattening radial density gradient. Our experimental situation is close to the isothermal three-dimensional expansion of a spherical crystallite as described by a theoretical model based on dynamical density functional theory. We obtain an overall good agree-ment of measured and calculated expansion curves at most probed densities. We anticipate that our study opens novel experimental and theoretical access to a long-standing condensed matter issue.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
The elastic stiffness tensor of cellulosic viscose fibers measured with Brillouin spectroscopy
Authors:
Caterina Czibula,
Manfred H. Ulz,
Alexander Wagner,
Kareem Elsayad,
Ulrich Hirn,
Kristie J. Koski
Abstract:
Brillouin light scattering spectroscopy (BLS) is applied to study the micromechanics of cellulosic viscose fibers, one of the commercially most important, man-made biobased fibers. Using an equal angle scattering geometry, we provide a thorough description of the procedure to determine the complete transversely isotropic elastic stiffness tensor. From the stiffness tensor the engineering-relevant…
▽ More
Brillouin light scattering spectroscopy (BLS) is applied to study the micromechanics of cellulosic viscose fibers, one of the commercially most important, man-made biobased fibers. Using an equal angle scattering geometry, we provide a thorough description of the procedure to determine the complete transversely isotropic elastic stiffness tensor. From the stiffness tensor the engineering-relevant material parameters such as Young's moduli, shear moduli, and Poisson's ratios in radial and axial fiber direction are evaluated. The investigated fiber type shows that, at ideal conditions, the material exhibits optical waveguide properties resulting in spontaneous Brillouin backscattering which can be used to obtain additional information from the Brillouin spectra, enabling the measurement of two different scattering processes and directions with only one scattering geometry.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Insights into the LiMn2O4 Cathode Stability in Aqueous Electrolyte
Authors:
Juan Carlos Gonzalez-Rosillo,
Maxim Guc,
Maciej Oskar Liedke,
Maik Butterling,
Ahmed G. Attallah,
Eric Hirschmann,
Andreas Wagner,
Victor Izquierdo-Roca,
Federico Baiutti,
Alex Morata,
Albert Tarancon
Abstract:
LiMn2O4 (LMO), cathodes present large stability when cycled in aqueous electrolytes, contrasting its behavior in conventional organic electrolytes in Lithium-ion batteries (LIBs). To elucidate the mechanisms underlying this distinctive behavior, we employ unconventional characterization techniques, including Variable Energy Positron Annihilation Lifetime Spectroscopy (VEPALS), Tip-Enhanced Raman S…
▽ More
LiMn2O4 (LMO), cathodes present large stability when cycled in aqueous electrolytes, contrasting its behavior in conventional organic electrolytes in Lithium-ion batteries (LIBs). To elucidate the mechanisms underlying this distinctive behavior, we employ unconventional characterization techniques, including Variable Energy Positron Annihilation Lifetime Spectroscopy (VEPALS), Tip-Enhanced Raman Spectroscopy (TERS) and macro-Raman Spectroscopy (with mm-size laser spot). These still rather unexplored techniques in the battery field provide complementary information across different length scales, revealing previously hidden features.
VEPALS offers atomic-scale insights, uncovering cationic defects and sub-nanometer pores that tend to collapse with cycling. TERS, operating at the nanometric range at the surface, captured the presence of Mn3O4 and its dissolution with cycling, elucidating dynamic changes during operation. Additionally, TERS highlights SO42- accumulation at grain boundaries. Macro-Raman Spectroscopy focuses on the micrometer scale, depicting small changes in the cathode's long-range order, suggesting a slow but progressive loss of crystalline quality under operation.
Integrating these techniques provides a comprehensive assessment of LMO cathode stability in aqueous electrolytes, offering multifaceted insights into phase and defect evolution that can help to rationalize the origin of such stability when compared to conventional organic electrolytes. Our findings advance the understanding of LMO behavior in aqueous environments and provide guidelines for its development for next-generation LIBs.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Probing single electrons across 300 mm spin qubit wafers
Authors:
Samuel Neyens,
Otto K. Zietz,
Thomas F. Watson,
Florian Luthi,
Aditi Nethwewala,
Hubert C. George,
Eric Henry,
Mohammad Islam,
Andrew J. Wagner,
Felix Borjans,
Elliot J. Connors,
J. Corrigan,
Matthew J. Curry,
Daniel Keith,
Roza Kotlyar,
Lester F. Lampert,
Mateusz T. Madzik,
Kent Millard,
Fahd A. Mohiyaddin,
Stefano Pellerano,
Ravi Pillarisetty,
Mick Ramsey,
Rostyslav Savytskyy,
Simon Schaal,
Guoji Zheng
, et al. (5 additional authors not shown)
Abstract:
Building a fault-tolerant quantum computer will require vast numbers of physical qubits. For qubit technologies based on solid state electronic devices, integrating millions of qubits in a single processor will require device fabrication to reach a scale comparable to that of the modern CMOS industry. Equally importantly, the scale of cryogenic device testing must keep pace to enable efficient dev…
▽ More
Building a fault-tolerant quantum computer will require vast numbers of physical qubits. For qubit technologies based on solid state electronic devices, integrating millions of qubits in a single processor will require device fabrication to reach a scale comparable to that of the modern CMOS industry. Equally importantly, the scale of cryogenic device testing must keep pace to enable efficient device screening and to improve statistical metrics like qubit yield and voltage variation. Spin qubits based on electrons in Si have shown impressive control fidelities but have historically been challenged by yield and process variation. Here we present a testing process using a cryogenic 300 mm wafer prober to collect high-volume data on the performance of hundreds of industry-manufactured spin qubit devices at 1.6 K. This testing method provides fast feedback to enable optimization of the CMOS-compatible fabrication process, leading to high yield and low process variation. Using this system, we automate measurements of the operating point of spin qubits and probe the transitions of single electrons across full wafers. We analyze the random variation in single-electron operating voltages and find that the optimized fabrication process leads to low levels of disorder at the 300 mm scale. Together these results demonstrate the advances that can be achieved through the application of CMOS industry techniques to the fabrication and measurement of spin qubit devices.
△ Less
Submitted 3 May, 2024; v1 submitted 10 July, 2023;
originally announced July 2023.
-
Ion Intercalation in Lanthanum Strontium Ferrite for Aqueous Electrochemical Energy Storage Devices
Authors:
Yunqing Tang,
Francesco Chiabrera,
Alex Morata,
Andrea Cavallaro,
Maciej O. Liedke,
Hemesh Avireddy,
Mar Maller,
Maik Butterling,
Andreas Wagner,
Michel Stchakovsky,
Federico Baiutti,
Ainara Aguadero,
Albert Tarancón
Abstract:
Ion intercalation of perovskite oxides in liquid electrolytes is a very promising method for controlling their functional properties while storing charge, which opens the potential application in different energy and information technologies. Although the role of defect chemistry in the oxygen intercalation in a gaseous environment is well established, the mechanism of ion intercalation in liquid…
▽ More
Ion intercalation of perovskite oxides in liquid electrolytes is a very promising method for controlling their functional properties while storing charge, which opens the potential application in different energy and information technologies. Although the role of defect chemistry in the oxygen intercalation in a gaseous environment is well established, the mechanism of ion intercalation in liquid electrolytes at room temperature is poorly understood. In this study, the defect chemistry during ion intercalation of La0.5Sr0.5FeO3-δ thin films in alkaline electrolytes is studied. Oxygen and proton intercalation into the LSF perovskite structure is observed at moderate electrochemical potentials (0.5 V to -0.4 V), giving rise to a change in the oxidation state of Fe (as a charge compensation mechanism). The variation of the concentration of holes as a function of the intercalation potential was characterized by in-situ ellipsometry and the concentration of electron holes was indirectly quantified for different electrochemical potentials. Finally, a dilute defect chemistry model that describes the variation of defect species during ionic intercalation was developed.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
Classification of FIB/SEM-tomography images for highly porous multiphase materials using random forest classifiers
Authors:
Markus Osenberg,
André Hilger,
Matthias Neumann,
Amalia Wagner,
Nicole Bohn,
Joachim R. Binder,
Volker Schmidt,
John Banhart,
Ingo Manke
Abstract:
FIB/SEM tomography represents an indispensable tool for the characterization of three-dimensional nanostructures in battery research and many other fields. However, contrast and 3D classification/reconstruction problems occur in many cases, which strongly limits the applicability of the technique especially on porous materials, like those used for electrode materials in batteries or fuel cells. Di…
▽ More
FIB/SEM tomography represents an indispensable tool for the characterization of three-dimensional nanostructures in battery research and many other fields. However, contrast and 3D classification/reconstruction problems occur in many cases, which strongly limits the applicability of the technique especially on porous materials, like those used for electrode materials in batteries or fuel cells. Distinguishing the different components like active Li storage particles and carbon/binder materials is difficult and often prevents a reliable quantitative analysis of image data, or may even lead to wrong conclusions about structure-property relationships. In this contribution, we present a novel approach for data classification in three-dimensional image data obtained by FIB/SEM tomography and its applications to NMC battery electrode materials. We use two different image signals, namely the signal of the angled SE2 chamber detector and the Inlens detector signal, combine both signals and train a random forest, i.e. a particular machine learning algorithm. We demonstrate that this approach can overcome current limitations of existing techniques suitable for multi-phase measurements and that it allows for quantitative data reconstruction even where current state-of the art techniques fail, or demand for large training sets. This approach may yield as guideline for future research using FIB/SEM tomography.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Integer Lattice Gas with a sampling collision operator for the fluctuating Diffusion Equation
Authors:
Noah Seekins,
Alexander J. Wagner
Abstract:
We developed an integer lattice gas method for the fluctuating diffusion equation. Such a method is unconditionally stable and able to recover the Poisson distribution for the microscopic densities. A key advance for integer lattice gases introduced in this paper is a new sampling collision operator that replaces particle collisions with sampling from an equilibrium distribution. This can increase…
▽ More
We developed an integer lattice gas method for the fluctuating diffusion equation. Such a method is unconditionally stable and able to recover the Poisson distribution for the microscopic densities. A key advance for integer lattice gases introduced in this paper is a new sampling collision operator that replaces particle collisions with sampling from an equilibrium distribution. This can increase the efficiency of our integer lattice gas by several orders of magnitude.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Reservoir Computing with Superconducting Electronics
Authors:
Graham E. Rowlands,
Minh-Hai Nguyen,
Guilhem J. Ribeill,
Andrew P. Wagner,
Luke C. G. Govia,
Wendson A. S. Barbosa,
Daniel J. Gauthier,
Thomas A. Ohki
Abstract:
The rapidity and low power consumption of superconducting electronics makes them an ideal substrate for physical reservoir computing, which commandeers the computational power inherent to the evolution of a dynamical system for the purposes of performing machine learning tasks. We focus on a subset of superconducting circuits that exhibit soliton-like dynamics in simple transmission line geometrie…
▽ More
The rapidity and low power consumption of superconducting electronics makes them an ideal substrate for physical reservoir computing, which commandeers the computational power inherent to the evolution of a dynamical system for the purposes of performing machine learning tasks. We focus on a subset of superconducting circuits that exhibit soliton-like dynamics in simple transmission line geometries. With numerical simulations we demonstrate the effectiveness of these circuits in performing higher-order parity calculations and channel equalization at rates approaching 100 Gb/s. The availability of a proven superconducting logic scheme considerably simplifies the path to a fully integrated reservoir computing platform and makes superconducting reservoirs an enticing substrate for high rate signal processing applications.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Momentum fluctuations in coarse grained systems
Authors:
M. Reza Parsa,
Changho Kim,
Alexander J. Wagner
Abstract:
At first glance the definition of mass and momentum appears to be uniquely defined. We show here, however, that this certainty can be misleading for many coarse grained systems. We show that particularly the fluctuating properties of common definitions of momentum in coarse grained methods like lattice gas and lattice Boltzmann do not agree with a fundamental definition of momentum. In the case of…
▽ More
At first glance the definition of mass and momentum appears to be uniquely defined. We show here, however, that this certainty can be misleading for many coarse grained systems. We show that particularly the fluctuating properties of common definitions of momentum in coarse grained methods like lattice gas and lattice Boltzmann do not agree with a fundamental definition of momentum. In the case of lattice gases, the definition of momentum will even disagree in the limit of large wavelength. For short times we can give analytical representations for the distribution of different momentum measures and thereby give a full account of these differences.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Detection of light emission produced in the process of positronium formation
Authors:
M. Pietrow,
R. Zaleski,
A. Wagner,
P. Slomski,
E. Hirschmann,
R. Krause-Rehberg,
M. O. Liedke,
M. Butterling,
D. Weinberger
Abstract:
The excess energy emitted during the positronium (Ps) formation in condensed matter may be released as light. Spectroscopic analysis of this light can be a new method of studying the electronic properties of materials. We report the first experimental attempt, according to our knowledge, to verify the existence of this emission process. As a result, the possibility of the emission of photons durin…
▽ More
The excess energy emitted during the positronium (Ps) formation in condensed matter may be released as light. Spectroscopic analysis of this light can be a new method of studying the electronic properties of materials. We report the first experimental attempt, according to our knowledge, to verify the existence of this emission process. As a result, the possibility of the emission of photons during Ps formation is within the experimental uncertainty in two different solids: an n-alkane and porous silica. However, it seems that the Ps formation on the alkane surface is not accompanied by the emission of photons with energy in the detection range of 1.6 - 3.9 eV. Various processes that can influence the energy of the photon emitted during the Ps formation are discussed to elucidate this issue. To aid future experiments, equations were developed to estimate the expected ratio of light emission events to annihilation events with the presence or absence of a photon during the Ps formation.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
Dissolution of donor-vacancy clusters in heavily doped n-type germanium
Authors:
Slawomir Prucnal,
Maciej O. Liedke,
Xiaoshuang Wang,
Maik Butterling,
Matthias Posselt,
Joachim Knoch,
Horst Windgassen,
Eric Hirschmann,
Yonder Berencén,
Lars Rebohle,
Mao Wang,
Enrico Napoltani,
Jacopo Frigerio,
Andrea Ballabio,
Giovani Isella,
René Hübner,
Andreas Wagner,
Hartmut Bracht,
Manfred Helm,
Shengqiang Zhou
Abstract:
The n-type do** of Ge is a self-limiting process due to the formation of vacancy-donor complexes (DnV with n <= 4) that deactivate the donors. This work unambiguously demonstrates that the dissolution of the dominating P4V clusters in heavily phosphorus-doped Ge epilayers can be achieved by millisecond-flash lamp annealing at about 1050 K. The P4V cluster dissolution increases the carrier concen…
▽ More
The n-type do** of Ge is a self-limiting process due to the formation of vacancy-donor complexes (DnV with n <= 4) that deactivate the donors. This work unambiguously demonstrates that the dissolution of the dominating P4V clusters in heavily phosphorus-doped Ge epilayers can be achieved by millisecond-flash lamp annealing at about 1050 K. The P4V cluster dissolution increases the carrier concentration by more than three-fold together with a suppression of phosphorus diffusion. Electrochemical capacitance-voltage measurements in conjunction with secondary ion mass spectrometry, positron annihilation lifetime spectroscopy and theoretical calculations enabled us to address and understand a fundamental problem that has hindered so far the full integration of Ge with complementary-metal-oxide-semiconductor technology.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Map** the Structure of Oxygen-Doped Wurtzite Aluminum Nitride Coatings From Ab Initio Random Structure Search and Experiments
Authors:
Piero Gasparotto,
Maria Fischer,
Daniele Scopece,
Maciej Oskar Liedke,
Maik Butterling,
Andreas Wagner,
Oguz Yildirim,
Mathis Trant,
Daniele Passerone,
Hans J. Hug,
Carlo Antonio Pignedoli
Abstract:
Machine learning is changing how we design and interpret experiments in materials science. In this work, we show how unsupervised learning, combined with ab initio modeling, improves our understanding of structural metastability in multicomponent alloys. We use the example case of Al-O-N alloys where the formation of aluminum vacancies in wurtzite AlN upon the incorporation of substitutional oxyge…
▽ More
Machine learning is changing how we design and interpret experiments in materials science. In this work, we show how unsupervised learning, combined with ab initio modeling, improves our understanding of structural metastability in multicomponent alloys. We use the example case of Al-O-N alloys where the formation of aluminum vacancies in wurtzite AlN upon the incorporation of substitutional oxygen can be seen as a general mechanism of solids where crystal symmetry is reduced to stabilize defects. The ideal AlN wurtzite crystal structure occupation cannot be matched due to the presence of an aliovalent hetero-element into the structure. The traditional interpretation of the c-lattice shrinkage in sputter-deposited Al-O-N films from X-ray diffraction (XRD) experiments suggests the existence of a solubility limit at 8at.% oxygen content. Here we show that such naive interpretation is misleading. We support XRD data with a machine learning analysis of ab initio simulations and positron annihilation lifetime spectroscopy data, revealing no signs of a possible solubility limit. Instead, the presence of a wide range of non-equilibrium oxygen-rich defective structures emerging at increasing oxygen contents suggests that the formation of grain boundaries is the most plausible mechanism responsible for the lattice shrinkage measured in Al-O-N sputtered films.
△ Less
Submitted 12 January, 2021; v1 submitted 28 September, 2020;
originally announced September 2020.
-
Enhanced fracture toughness in ceramic superlattice thin films: on the role of coherency stresses and misfit dislocations
Authors:
Antonia Wagner,
David Holec,
Paul Heinz Mayrhofer,
Matthias Bartosik
Abstract:
Superlattice (SL) thin films composed of refractory ceramics unite extremely high hardness and enhanced fracture toughness; a material combination often being mutually exclusive. While the hardness enhancement obtained whentwo materials form a superlattice is well described by existing models based on dislocation mobility, the underlying mechanisms behind the increase in fracture toughness are yet…
▽ More
Superlattice (SL) thin films composed of refractory ceramics unite extremely high hardness and enhanced fracture toughness; a material combination often being mutually exclusive. While the hardness enhancement obtained whentwo materials form a superlattice is well described by existing models based on dislocation mobility, the underlying mechanisms behind the increase in fracture toughness are yet to be unraveled. Here we provide a model based on linear elasticity theory to predict the fracture toughness enhancement in (semi-)epitaxial nanolayers due to coherency stresses and formation of misfit dislocations. We exemplarily study a superlattice structure composed of two cubic transition metal nitrides (TiN, CrN) on a MgO (100) single-crystal substrate. Minimization of the overall strain energy, each time a new layer is added on the nanolayered stack, allows estimating the density of misfit dislocations formed at the interfaces. The evolving coherency stresses, which are partly relaxed by the misfit dislocations, are then used to calculate the apparent fracture toughness of respective SL architectures by applying the weight function method. The results show that the critical stress intensity increases steeply with increasing bilayer period for very thin (essentially dislocation-free) SLs, before the K_IC values decline more gently along with the formation of misfit dislocations. The characteristic K_IC vs. bilayer-period-dependence nicely matches experimental trends. Importantly, all critical stress intensity values of the superlattice films clearly exceed the intrinsic fracture toughness of the constituting layer materials, evincing the importance of coherency stresses for increasing the crack growth resistance.
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Vacancy-Hydrogen Interaction in Niobium during Low-Temperature Baking
Authors:
Marc Wenskat,
Jakub Cizek,
Maciej Oskar Liedke,
Maik Butterling,
Christopher Bate,
Peter Hausild,
Eric Hirschmann,
Andreas Wagner,
Hans Weise
Abstract:
A recently discovered modified low-temperature baking leads to reduced surface losses and an increase of the accelerating gradient of superconducting TESLA shape cavities. We will show that the dynamics of vacancy-hydrogen complexes at low-temperature baking lead to a suppression of lossy nanohydrides at 2\,K and thus a significant enhancement of accelerator performance. Utilizing Doppler broadeni…
▽ More
A recently discovered modified low-temperature baking leads to reduced surface losses and an increase of the accelerating gradient of superconducting TESLA shape cavities. We will show that the dynamics of vacancy-hydrogen complexes at low-temperature baking lead to a suppression of lossy nanohydrides at 2\,K and thus a significant enhancement of accelerator performance. Utilizing Doppler broadening Positron Annihilation Spectroscopy, Positron Annihilation Lifetime Spectroscopy and instrumented nanoindentation, samples made from European XFEL niobium sheets were investigated. We studied the evolution of vacancies in bulk samples and in the sub-surface region and their interaction with hydrogen at different temperature levels during {\it in-situ} and {\it ex-situ} annealing.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
Nitrogen magneto-ionics
Authors:
Julius de Rojas,
Alberto Quintana,
Aitor Lopeandía,
Joaquín Salguero,
Beatriz Muñiz,
Fatima Ibrahim,
Mairbek Chshiev,
Maciej O. Liedke,
Maik Butterling,
Andreas Wagner,
Veronica Sireus,
Llibertat Abad,
Christopher J. Jensen,
Kai Liu,
Josep Nogués,
José L. Costa-Krämer,
Enric Menéndez,
Jordi Sort
Abstract:
So far, magneto-ionics, understood as voltage-driven ion transport in magnetic materials, has largely relied on controlled migration of oxygen ion/vacancy and, to a lesser extent, lithium and hydrogen. Here, we demonstrate efficient, room-temperature, voltage-driven nitrogen transport (i.e., nitrogen magneto-ionics) by electrolyte-gating of a single CoN film (without an ion-reservoir layer). Nitro…
▽ More
So far, magneto-ionics, understood as voltage-driven ion transport in magnetic materials, has largely relied on controlled migration of oxygen ion/vacancy and, to a lesser extent, lithium and hydrogen. Here, we demonstrate efficient, room-temperature, voltage-driven nitrogen transport (i.e., nitrogen magneto-ionics) by electrolyte-gating of a single CoN film (without an ion-reservoir layer). Nitrogen magneto-ionics in CoN is compared to oxygen magneto-ionics in Co3O4, both layers showing a nanocrystalline face-centered-cubic structure and reversible voltage-driven ON-OFF ferromagnetism. In contrast to oxygen, nitrogen transport occurs uniformly creating a plane-wave-like migration front, without assistance of diffusion channels. Nitrogen magneto-ionics requires lower threshold voltages and exhibits enhanced rates and cyclability. This is due to the lower activation energy for ion diffusion and the lower electronegativity of nitrogen compared to oxygen. These results are appealing for the use of magneto-ionics in nitride semiconductor devices, in applications requiring endurance and moderate speeds of operation, such as brain-inspired computing.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Light-driven permanent transition from insulator to conductor in Ga2O3
Authors:
F. A. Selim,
D. Rana,
S. Agarwal,
M. Islam,
A. Banerjee,
B. P. Uberuaga,
P. Saadatkia,
P. Dulal,
N. Adhikari,
M. Butterling,
M. O. Liedke,
A. Wagner
Abstract:
The transition from insulator to conductor can be achieved in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by do**. Here we reveal a mechanism the lattice may adopt to induce such a transition. We show that limited exposure to sub-bandgap light caused a permanent transition from an insulator state to a condu…
▽ More
The transition from insulator to conductor can be achieved in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by do**. Here we reveal a mechanism the lattice may adopt to induce such a transition. We show that limited exposure to sub-bandgap light caused a permanent transition from an insulator state to a conductor state in the insulating oxide Ga2O3 with 9-orders of magnitude increase in electronic conduction. Photoexcitation modifies the charge state of an O-vacancy and the redistribution of the localized electrons, leading to a massive structural distortion in the lattice that is shown to be the underlying mechanism. It modifies density of states and introduces new stable states with shallower energy levels, leading to this intriguing behavior. We suggest that this mechanism may occur in other wide bandgap metal oxides leading to drastic modification in their electronic properties.
△ Less
Submitted 22 March, 2020;
originally announced March 2020.
-
Boosting room temperature magneto-ionics in Co3O4
Authors:
Julius de Rojas,
Alberto Quintana,
Aitor Lopeandía,
Joaquín Salguero,
José L. Costa-Krämer,
Llibertat Abad,
Maciej O. Liedke,
Maik Butterling,
Andreas Wagner,
Lowie Henderick,
Jolien Dendooven,
Christophe Detavernier,
Jordi Sort,
Enric Menéndez
Abstract:
Voltage control of magnetism through electric field-induced oxygen motion (magneto-ionics) could represent a significant breakthrough in the pursuit for new strategies to enhance energy efficiency in a large variety of magnetic devices, such as magnetic micro-electro-mechanical systems (MEMS), magnetic logics, spin electronics, or neuromorphic computing, i.e., envisaging ultra-low power emulation…
▽ More
Voltage control of magnetism through electric field-induced oxygen motion (magneto-ionics) could represent a significant breakthrough in the pursuit for new strategies to enhance energy efficiency in a large variety of magnetic devices, such as magnetic micro-electro-mechanical systems (MEMS), magnetic logics, spin electronics, or neuromorphic computing, i.e., envisaging ultra-low power emulation of the biological synapse. Boosting the induced changes in magnetization, magneto-ionic motion and cyclability (endurance) continue to be key challenges to turn magneto-ionic phenomena into real applications. Here, we demonstrate that, without degrading cyclability, room temperature magneto-ionic motion in electrolyte-gated paramagnetic and fairly thick (> 100 nm) Co3O4 films largely depends on the configuration used to apply the electric field. In particular, magneto-ionic effects are significantly increased both in terms of generated magnetization (6 times larger: from 118.5 to 699.2 emu cm-3) and speed (35 times faster: from 33.1 to 1170.8 emu cm-3 h-1) if the electric field is applied across a conducting buffer layer (grown underneath the Co3O4 films), instead of directly contacting Co3O4. This is attributed to a greater uniformity and strength of the applied electric field when using the conducting layer. These results may trigger the use of oxygen magneto-ionics into promising new technologies, such as magnetic MEMS or brain-inspired computing, which require endurance and moderate speeds of operation.
△ Less
Submitted 22 January, 2020;
originally announced January 2020.
-
Magnetic response of FeRh to static and dynamic disorder
Authors:
Benedikt Eggert,
Alexander Schmeink,
Johanna Lill,
Maciej O. Liedke Andreas Wagner,
Sakura Pascarelli,
Kay Potzger,
Jürgen Lindner,
Thomas Thomson,
Jürgen Fassbender,
Katharina Ollefs,
Werner Keune,
Rantej Bali,
Heiko Wende
Abstract:
Changes of the magnetic and crystal structure on the microscopic scale in 40 nm FeRh thin films have been applied to investigate the phenomena of a disorder induced ferromagnetism at room temperature initiated through light ion-irradiation with fluences up to 0.125 Ne$^+$/nm$^{-2}$. Magnetometry shows an increase of magnetic ordering at low temperatures and a decrease of the transition temperature…
▽ More
Changes of the magnetic and crystal structure on the microscopic scale in 40 nm FeRh thin films have been applied to investigate the phenomena of a disorder induced ferromagnetism at room temperature initiated through light ion-irradiation with fluences up to 0.125 Ne$^+$/nm$^{-2}$. Magnetometry shows an increase of magnetic ordering at low temperatures and a decrease of the transition temperature combined with a broadening of the hysteresis with rising ion fluence. $^{57}$Fe Mössbauer spectroscopy reveals the occurrence of an additional magnetic contributions with an hyperfine splitting of 27.2 T - identical to that of ferromagnetic B2-FeRh. The appearance of an anti-site Fe-contribution can be assumed to be lower than 0.6 Fe-at%, indicating that no change of the chemical composition is evident. The investigation of the local structure shows an increase of the static mean square relative displacement determined by X-ray absorption fine structure spectroscopy, while an increase of the defect-concentration has been determined by positron annihilation spectroscopy. From the changes of the microscopic magnetic structure a similarity between the temperature induced and the structural disorder induced ferromagnetic phase can be observed. These findings emphasize the relationship between magnetic ordering and the microscopic defect structure in FeRh.
△ Less
Submitted 25 November, 2019;
originally announced November 2019.
-
Chemical manipulation of hydrogen induced high p-type and n-type conductivity in Ga2O3
Authors:
Md Minhazul Islam,
Maciej Oskar Liedke,
David Winarski,
Maik Butterling,
Andreas Wagner,
Peter Hosemann,
Yongqiang Wang,
Blas Uberuaga,
Farida A. Selim
Abstract:
Advancement of optoelectronic and high-power devices is tied to the development of wide band gap materials with excellent transport properties. However, bipolar do** (n-type and p-type do**) and realizing high carrier density while maintaining good mobility have been big challenges in wide band gap materials. Here P-type and n-type conductivity was introduced in beta-Ga2O3, an ultra-wide band…
▽ More
Advancement of optoelectronic and high-power devices is tied to the development of wide band gap materials with excellent transport properties. However, bipolar do** (n-type and p-type do**) and realizing high carrier density while maintaining good mobility have been big challenges in wide band gap materials. Here P-type and n-type conductivity was introduced in beta-Ga2O3, an ultra-wide band gap oxide, by controlling hydrogen incorporation in the lattice without further do**. Hydrogen induced a 9-order of magnitude increase of n-type conductivity with donor ionization energy of 20 meV and resistivity of 10-4 Ohm.cm. The conductivity was switched to p-type with acceptor ionization energy of 42 meV by altering hydrogen incorporation in the lattice. Density functional theory calculations were used to examine hydrogen location in the Ga2O3 lattice and identified a new donor type as the source of this remarkable n-type conductivity. Positron annihilation spectroscopy confirmed this finding and the interpretation of the results. This work illustrates a new approach that allows a tunable and reversible way of modifying the conductivity of semiconductors and it is expected to have profound implications on semiconductor field. At the same time it demonstrates for the first time p-type and remarkable n-type conductivity in Ga2O3 which should usher in the development of Ga2O3 devices and advance optoelectronics and high-power devices
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Demonstration of a superconducting nanowire microwave switch
Authors:
Andrew Wagner,
Leonardo Ranzani,
Guilhem Ribeill,
Tom Ohki
Abstract:
The functionality of a nanowire integrated into a superconducting transmission line acting as a single pole single throw switch is demonstrated. The switch has an instantaneous bandwidth from 2 to 8 GHz with more than 10 dB of isolation between the open and closed states. The switch consumes no power in the closed state and $\approx 15~\rm{nW}$ in the open state. The rise and fall response time be…
▽ More
The functionality of a nanowire integrated into a superconducting transmission line acting as a single pole single throw switch is demonstrated. The switch has an instantaneous bandwidth from 2 to 8 GHz with more than 10 dB of isolation between the open and closed states. The switch consumes no power in the closed state and $\approx 15~\rm{nW}$ in the open state. The rise and fall response time between open and closed states is approximately $370~\rm{ps}$.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Large fluctuations in non-ideal coarse-grained systems
Authors:
M. Reza Parsa,
Alexander J. Wagner
Abstract:
Using the recently introduced Molecular Dynamics Lattice Gas (MDLG) approach, we test fluctuations of coarse-grained quantities. We show that as soon as the system can no longer be considered an ideal gas fluctuations fail to diminish upon coarse-graining as is usually expected. These results suggest that current approaches to simulating fluctuating hydrodynamics may have to be augmented to achiev…
▽ More
Using the recently introduced Molecular Dynamics Lattice Gas (MDLG) approach, we test fluctuations of coarse-grained quantities. We show that as soon as the system can no longer be considered an ideal gas fluctuations fail to diminish upon coarse-graining as is usually expected. These results suggest that current approaches to simulating fluctuating hydrodynamics may have to be augmented to achieve quantitative results for systems with a non-ideal equation of state. The MDLG method gives a guidance to the exact nature of the fluctuation in such systems.
△ Less
Submitted 14 March, 2020; v1 submitted 18 May, 2019;
originally announced May 2019.
-
Multicomponent Flow on Curved Surfaces: A Vielbein Lattice Boltzmann Approach
Authors:
Victor E. Ambruş,
Sergiu Busuioc,
Alexander J. Wagner,
Fabien Paillusson,
Halim Kusumaatmaja
Abstract:
We develop and implement a novel lattice Boltzmann scheme to study multicomponent flows on curved surfaces, coupling the continuity and Navier-Stokes equations with the Cahn-Hilliard equation to track the evolution of the binary fluid interfaces. Standard lattice Boltzmann method relies on regular Cartesian grids, which makes it generally unsuitable to study flow problems on curved surfaces. To al…
▽ More
We develop and implement a novel lattice Boltzmann scheme to study multicomponent flows on curved surfaces, coupling the continuity and Navier-Stokes equations with the Cahn-Hilliard equation to track the evolution of the binary fluid interfaces. Standard lattice Boltzmann method relies on regular Cartesian grids, which makes it generally unsuitable to study flow problems on curved surfaces. To alleviate this limitation, we use a vielbein formalism to write down the Boltzmann equation on an arbitrary geometry, and solve the evolution of the fluid distribution functions using a finite difference method. Focussing on the torus geometry as an example of a curved surface, we demonstrate drift motions of fluid droplets and stripes embedded on the surface of a torus. Interestingly, they migrate in opposite directions: fluid droplets to the outer side while fluid stripes to the inner side of the torus. For the latter we demonstrate that the global minimum configuration is unique for small stripe widths, but it becomes bistable for large stripe widths. Our simulations are also in agreement with analytical predictions for the Laplace pressure of the fluid stripes, and their damped oscillatory motion as they approach equilibrium configurations, capturing the corresponding decay timescale and oscillation frequency. Finally, we simulate the coarsening dynamics of phase separating binary fluids in the hydrodynamics and diffusive regimes for tori of various shapes, and compare the results against those for a flat two-dimensional surface. Our lattice Boltzmann scheme can be extended to other surfaces and coupled to other dynamical equations, opening up a vast range of applications involving complex flows on curved geometries.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Vacancy complexes in nonequilibrium germanium-tin semiconductors
Authors:
Simone Assali,
Mohamed Elsayed,
Jérôme Nicolas,
Maciej Oskar Liedke,
Andreas Wagner,
Maik Butterling,
Reinhard Krause-Rehberg,
Oussama Moutanabbir
Abstract:
Understanding the nature and behavior of vacancy-like defects in epitaxial GeSn metastable alloys is crucial to elucidate the structural and optoelectronic properties of these emerging semiconductors. The formation of vacancies and their complexes is expected to be promoted by the relatively low substrate temperature required for the epitaxial growth of GeSn layers with Sn contents significantly a…
▽ More
Understanding the nature and behavior of vacancy-like defects in epitaxial GeSn metastable alloys is crucial to elucidate the structural and optoelectronic properties of these emerging semiconductors. The formation of vacancies and their complexes is expected to be promoted by the relatively low substrate temperature required for the epitaxial growth of GeSn layers with Sn contents significantly above the equilibrium solubility of 1 at.%. These defects can impact both the microstructure and charge carrier lifetime. Herein, to identify the vacancy-related complexes and probe their evolution as a function of Sn content, depth-profiled pulsed low-energy positron annihilation lifetime spectroscopy and Doppler broadening spectroscopy were combined to investigate GeSn epitaxial layers with Sn content in the 6.5-13.0 at.% range. The samples were grown by chemical vapor deposition method at temperatures between 300 and 330 °C. Regardless of the Sn content, all GeSn samples showed the same depth-dependent increase in the positron annihilation line broadening parameters, which confirmed the presence of open volume defects. The measured average positron lifetimes were the highest (380-395 ps) in the region near the surface and monotonically decrease across the analyzed thickness, but remain above 350 ps. All GeSn layers exhibit lifetimes that are 85 to 110 ps higher than the Ge reference layers. Surprisingly, these lifetimes were found to decrease as Sn content increases in GeSn layers. These measurements indicate that divacancies are the dominant defect in the as-grown GeSn layers. However, their corresponding lifetime was found to be shorter than in epitaxial Ge thus suggesting that the presence of Sn may alter the structure of divacancies. Additionally, GeSn layers were found to also contain a small fraction of vacancy clusters, which become less important as Sn content increases.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Lattice Boltzmann simulation of mixtures with multicomponent van der Waals equation of state
Authors:
Kent S. Ridl,
Alexander J. Wagner
Abstract:
We developed a general framework for simulating multicomponent and multiphase systems using the lattice Boltzmann framework. Despite the fact that there is no restriction on the number of components in principle, in this article we focus an application to two-component mixtures, but we also demonstrate that the algorighm works for larger numbers of components. To validate our algorithm we separate…
▽ More
We developed a general framework for simulating multicomponent and multiphase systems using the lattice Boltzmann framework. Despite the fact that there is no restriction on the number of components in principle, in this article we focus an application to two-component mixtures, but we also demonstrate that the algorighm works for larger numbers of components. To validate our algorithm we separately minimized this underlying free energy to generate theoretical phase diagrams for mixtures of fluids with a van der Waals-like free energy. All the theoretical phase diagrams are well recovered by our lattice Boltzmann method.
△ Less
Submitted 18 May, 2018;
originally announced May 2018.
-
Fourth-order analysis of a diffusive lattice Boltzmann method for barrier coatings
Authors:
Kyle T. Strand,
Aaron J. Feickert,
Alexander J. Wagner
Abstract:
We examine the applicability of diffusive lattice Boltzmann methods to simulate the fluid transport through barrier coatings, finding excellent agreement between simulations and analytical predictions for standard parameter choices. To examine more interesting non-Fickian behavior and multiple layers of different coatings, it becomes necessary to explore a wider range of parameters. However, such…
▽ More
We examine the applicability of diffusive lattice Boltzmann methods to simulate the fluid transport through barrier coatings, finding excellent agreement between simulations and analytical predictions for standard parameter choices. To examine more interesting non-Fickian behavior and multiple layers of different coatings, it becomes necessary to explore a wider range of parameters. However, such a range of parameters exposes deficiencies in such an implementation. To investigate these discrepancies, we examine the form of higher-order terms in the hydrodynamic limit of our lattice Boltzmann method. We identify these corrections to fourth order and validate these predictions with high accuracy. However, it is observed that the validated correction terms do not fully explain the bulk of observed error. This error was instead caused by the standard finite boundary conditions for the contact of the coating with the imposed environment. We identify a self-consistent form of these boundary conditions for which these errors are dramatically reduced. The instantaneous switching used as a boundary condition for the barrier problem proves demanding enough that any higher-order corrections meaningfully contribute for a small range of parameters. There is a large parameter space where the agreement between simulations and analytical predictions even in the second-order form are below 0.1%, making further improvements to the algorithm unnecessary for such an application.
△ Less
Submitted 23 May, 2017; v1 submitted 16 March, 2017;
originally announced March 2017.
-
Positron spectroscopy of point defects in the skyrmion-lattice compound MnSi
Authors:
Markus Reiner,
Andreas Bauer,
Michael Leitner,
Thomas Gigl,
Wolfgang Anwand,
Maik Butterling,
Andreas Wagner,
Petra Kudejova,
Christian Pfleiderer,
Christoph Hugenschmidt
Abstract:
Outstanding crystalline perfection is a key requirement for the formation of new forms of electronic order in a vast number of widely different materials. Whereas excellent sample quality represents a standard claim in the literature, there are, quite generally, no reliable microscopic probes to establish the nature and concentration of lattice defects such as voids, dislocations and different spe…
▽ More
Outstanding crystalline perfection is a key requirement for the formation of new forms of electronic order in a vast number of widely different materials. Whereas excellent sample quality represents a standard claim in the literature, there are, quite generally, no reliable microscopic probes to establish the nature and concentration of lattice defects such as voids, dislocations and different species of point defects on the level relevant to the length and energy scales inherent to these new forms of order. Here we report an experimental study of the archetypical skyrmion-lattice compound MnSi, where we relate the characteristic types of point defects and their concentration to the magnetic properties by combining different types of positron spectroscopy with ab-initio calculations and bulk measurements. We find that Mn antisite disorder broadens the magnetic phase transitions and lowers their critical temperatures, whereas the skyrmion lattice phase forms for all samples studied underlining the robustness of this topologically non-trivial state. Taken together, this demonstrates the unprecedented sensitivity of positron spectroscopy in studies of new forms of electronic order.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
A Fluctuating Lattice Boltzmann Method for the Diffusion Equation
Authors:
Alexander J. Wagner,
Kyle Strand
Abstract:
We derive a fluctuating lattice Boltzmann method for the diffusion equation. The derivation removes several shortcomings of previous derivations for fluctuating lattice Boltzmann methods for hydrodynamic systems. The comparative simplicity of this diffusive system highlights the basic features of this first exact derivation of a fluctuating lattice Boltzmann method.
We derive a fluctuating lattice Boltzmann method for the diffusion equation. The derivation removes several shortcomings of previous derivations for fluctuating lattice Boltzmann methods for hydrodynamic systems. The comparative simplicity of this diffusive system highlights the basic features of this first exact derivation of a fluctuating lattice Boltzmann method.
△ Less
Submitted 24 June, 2016;
originally announced June 2016.
-
Emergence of the XY-like phase in the deformed spin-3/2 AKLT systems
Authors:
Ching-Yu Huang,
Maximilian Anton Wagner,
Tzu-Chieh Wei
Abstract:
Affleck, Kennedy, Lieb and Taski (AKLT) constructed an exemplary spin-3/2 valence-bond solid (VBS) state on the hexagonal lattice, which is the ground state of an isotropic quantum antiferromagnet and possesses no spontaneous magnetization but finite correlation length. This is distinct from the Néel ordered state of the spin-3/2 Heisenberg model on the same lattice. Niggemann, Klümper and Zittart…
▽ More
Affleck, Kennedy, Lieb and Taski (AKLT) constructed an exemplary spin-3/2 valence-bond solid (VBS) state on the hexagonal lattice, which is the ground state of an isotropic quantum antiferromagnet and possesses no spontaneous magnetization but finite correlation length. This is distinct from the Néel ordered state of the spin-3/2 Heisenberg model on the same lattice. Niggemann, Klümper and Zittartz then generalized the AKLT Hamiltonian to one family invariant under spin rotation about the z-axis. The ground states of this family can be parameterized by a single parameter that deforms the AKLT state, and this system exhibits a quantum phase transition between the VBS and Néel phases, as the parameter increases from the AKLT point to large anisotropy. We investigate the opposite regime when the parameter decreases from the AKLT point and find that there appears to be a Berezinskii-Kosterlitz-Thouless-like transition from the VBS phase to an XY phase. Such a transition also occurs in the deformation of other types of AKLT states with triplet-bond constructions on the same lattice. However, we do not find such an XY-like phase in the deformed AKLT models on other trivalent lattices, such as square-octagon, cross and star lattices. On the star lattice, the deformed family of AKLT states remain in the same phase as the isotropic AKLT state throughout the whole region of the parameter. However, for two triplet-bond generalizations, the triplet VBS phase is sandwiched between two ferromagnetic phases (for large and small deformation parameters, respectively), which are characterized by spontaneous magnetizations along different axes. Along the way, we also discuss how various deformed AKLT states can be used for the purpose of universal quantum computation.
△ Less
Submitted 26 May, 2016;
originally announced May 2016.
-
Mean-Field Analysis of Spinor Bosons in Optical Superlattices
Authors:
Andreas Wagner,
Andreas Nunnenkamp,
Christoph Bruder
Abstract:
We study the ground-state phase diagram of spinless and spin-1 bosons in optical superlattices using a Bose-Hubbard Hamiltonian that includes spin-dependent interactions. We decouple the unit cells of the superlattice via a mean-field approach and take into account the dynamics within the unit cell exactly. The system supports Mott-insulating as well as superfluid phases. The transitions between t…
▽ More
We study the ground-state phase diagram of spinless and spin-1 bosons in optical superlattices using a Bose-Hubbard Hamiltonian that includes spin-dependent interactions. We decouple the unit cells of the superlattice via a mean-field approach and take into account the dynamics within the unit cell exactly. The system supports Mott-insulating as well as superfluid phases. The transitions between these phases are second-order for spinless bosons and second- or first-order for spin-1 bosons. Anti-ferromagnetic interactions energetically penalize high-spin configurations and elongate all Mott lobes, especially the ones corresponding to an even atom number on each lattice site. We find that the quadratic Zeeman effect lifts the degeneracy between different polar superfluid phases leading to additional metastable phases and first-order phase transitions. Finally, we show that an energy offset between the two sites of the unit cell induces a staircase of single-atom tunneling resonances which surprisingly survives well into the superfluid regime.
△ Less
Submitted 12 July, 2012;
originally announced July 2012.
-
A fluctuating lattice-Boltzmann method with improved Galilean invariance
Authors:
G. Kaehler,
A. J. Wagner
Abstract:
In this paper we show that standard implementations of fluctuating Lattice Boltzmann methods do not obey Galilean invariance at a fundamental level. In trying to remedy this we are led to a novel kind of multi-relaxation time lattice Boltzmann methods where the collision matrix depends on the local velocity. This new method is conceptually elegant but numerically inefficient. With a small numerica…
▽ More
In this paper we show that standard implementations of fluctuating Lattice Boltzmann methods do not obey Galilean invariance at a fundamental level. In trying to remedy this we are led to a novel kind of multi-relaxation time lattice Boltzmann methods where the collision matrix depends on the local velocity. This new method is conceptually elegant but numerically inefficient. With a small numerical trick, however, this method recovers nearly the original efficiency and allows the practical implementation of fluctuating lattice Boltzmann methods with significantly improved Galilean invariance. This will be important for applications of fluctuating lattice Boltzmann for non-equilibrium systems involving strong flow fields.
△ Less
Submitted 30 April, 2012; v1 submitted 30 April, 2012;
originally announced April 2012.
-
Spin-1 Atoms in Optical Superlattices: Single-Atom Tunneling and Entanglement
Authors:
Andreas Wagner,
Christoph Bruder,
Eugene Demler
Abstract:
We examine spinor Bose-Einstein condensates in optical superlattices theoretically using a Bose-Hubbard Hamiltonian that takes spin effects into account. Assuming that a small number of spin-1 bosons is loaded in an optical potential, we study single-particle tunneling that occurs when one lattice site is ramped up relative to a neighboring site. Spin-dependent effects modify the tunneling events…
▽ More
We examine spinor Bose-Einstein condensates in optical superlattices theoretically using a Bose-Hubbard Hamiltonian that takes spin effects into account. Assuming that a small number of spin-1 bosons is loaded in an optical potential, we study single-particle tunneling that occurs when one lattice site is ramped up relative to a neighboring site. Spin-dependent effects modify the tunneling events in a qualitative and quantitative way. Depending on the asymmetry of the double well different types of magnetic order occur, making the system of spin-1 bosons in an optical superlattice a model for mesoscopic magnetism. We use a double-well potential as a unit cell for a one-dimensional superlattice. Homogeneous and inhomogeneous magnetic fields are applied and the effects of the linear and the quadratic Zeeman shifts are examined. We also investigate the bipartite entanglement between the sites and construct states of maximal entanglement. The entanglement in our system is due to both orbital and spin degrees of freedom. We calculate the contribution of orbital and spin entanglement and show that the sum of these two terms gives a lower bound for the total entanglement.
△ Less
Submitted 10 January, 2012; v1 submitted 10 October, 2011;
originally announced October 2011.
-
Rise and fall of defect induced ferromagnetism in SiC single crystals
Authors:
Lin Li,
S. Prucnal,
S. D. Yao,
K. Potzger,
W. Anwand,
A. Wagner,
Shengqiang Zhou
Abstract:
6H-SiC (silicon carbide) single crystals containing VSi-VC divacancies are investigated with respect to magnetic and structural properties. We found that an initial increase of structural disorder leads to pronounced ferromagnetic properties at room temperature. Further introduction of disorder lowers the saturation magnetization and is accompanied with the onset of lattice amorphization. Close to…
▽ More
6H-SiC (silicon carbide) single crystals containing VSi-VC divacancies are investigated with respect to magnetic and structural properties. We found that an initial increase of structural disorder leads to pronounced ferromagnetic properties at room temperature. Further introduction of disorder lowers the saturation magnetization and is accompanied with the onset of lattice amorphization. Close to the threshold of full amorphization, also divacancy clusters are formed and the saturation magnetization nearly drops to zero.
△ Less
Submitted 6 June, 2011;
originally announced June 2011.
-
Survey of Morphologies Formed in the Wake of an Enslaved Phase-Separation Front in Two Dimensions
Authors:
E. M. Foard,
A. J. Wagner
Abstract:
A phase-separation front will leave in its wake a phase-separated morphology that differs markedly from homogeneous phase-separation morphologies. For a purely diffusive system such a front, moving with constant velocity, will generate very regular, non-equilibrium structures. We present here a numerical study of these fronts using a lattice Boltzmann method. In two dimensions these structures are…
▽ More
A phase-separation front will leave in its wake a phase-separated morphology that differs markedly from homogeneous phase-separation morphologies. For a purely diffusive system such a front, moving with constant velocity, will generate very regular, non-equilibrium structures. We present here a numerical study of these fronts using a lattice Boltzmann method. In two dimensions these structures are regular stripes or droplet arrays. In general the kind and orientation of the selected morphology and the size of the domains depends on the speed of the front as well as the composition of the material overtaken by the phase-separation front. We present a survey of morphologies as a function of these two parameters. We show that the resulting morphologies are initial condition dependent. We then examine which of the potential morphologies is the most stable. An analytical analysis for symmetrical compositions predicts the transition point from orthogonal to parallel stripes.
△ Less
Submitted 1 December, 2011; v1 submitted 28 March, 2011;
originally announced March 2011.
-
Derivation of Hydrodynamics for Multi-Relaxation Time Lattice Boltzmann using the Moment-Approach
Authors:
Goetz Kaehler,
Alexander Wagner
Abstract:
A general analysis of the hydrodynamic limit of multi-relaxation time lattice Boltzmann models is presented. We examine multi-relaxation time BGK collision operators that are constructed similarly to those for the MRT case, however, without explicitly moving into a moment space representation. The corresponding 'moments' are derived as left eigenvectors of said collision operator in velocity space…
▽ More
A general analysis of the hydrodynamic limit of multi-relaxation time lattice Boltzmann models is presented. We examine multi-relaxation time BGK collision operators that are constructed similarly to those for the MRT case, however, without explicitly moving into a moment space representation. The corresponding 'moments' are derived as left eigenvectors of said collision operator in velocity space. Consequently we can, in a representation independent of the chosen base velocity set, generate the conservation equations. We find a significant degree of freedom in the choice of the collision matrix and the associated basis which leaves the collision operator invariant. Therefore we can explain why MRT implementations in the literature reproduce identical hydrodynamics despite being based on different orthogonalization relations.
△ Less
Submitted 9 November, 2010; v1 submitted 5 November, 2010;
originally announced November 2010.
-
Cross Correlators and Galilean Invariance in Fluctuating Ideal Gas Lattice Boltzmann Simulations
Authors:
Goetz Kaehler,
Alexander Wagner
Abstract:
We analyze the Lattice Boltzmann method for the simulation of fluctuating hydrodynamics by Adhikari et al. [Europhys. Lett. 71, 473 (2005)] and find that it shows excellent agreement with theory even for small wavelengths as long as a stationary system is considered. This is in contrast to other finite difference and older lattice Boltzmann implementations that show convergence only in the limit o…
▽ More
We analyze the Lattice Boltzmann method for the simulation of fluctuating hydrodynamics by Adhikari et al. [Europhys. Lett. 71, 473 (2005)] and find that it shows excellent agreement with theory even for small wavelengths as long as a stationary system is considered. This is in contrast to other finite difference and older lattice Boltzmann implementations that show convergence only in the limit of large wavelengths. In particular cross correlators vanish to less than 0.5%. For larger mean velocities, however, Galilean invariance violations manifest themselves through errors of a magnitude similar to those of the earlier implementations.
△ Less
Submitted 7 October, 2010; v1 submitted 6 October, 2010;
originally announced October 2010.
-
Genotype networks in metabolic reaction spaces
Authors:
Areejit Samal,
Joao F. Matias Rodrigues,
Jürgen Jost,
Olivier C. Martin,
Andreas Wagner
Abstract:
Background: A metabolic genotype comprises all chemical reactions an organism can catalyze via enzymes encoded in its genome. A genotype is viable in a given environment if it is capable of producing all biomass components the organism needs to survive and reproduce. Previous work has focused on the properties of individual genotypes while little is known about how genome-scale metabolic networks…
▽ More
Background: A metabolic genotype comprises all chemical reactions an organism can catalyze via enzymes encoded in its genome. A genotype is viable in a given environment if it is capable of producing all biomass components the organism needs to survive and reproduce. Previous work has focused on the properties of individual genotypes while little is known about how genome-scale metabolic networks with a given function can vary in their reaction content. Results: We here characterize spaces of such genotypes. Specifically, we study metabolic genotypes whose phenotype is viability in minimal chemical environments that differ in their sole carbon sources. We show that regardless of the number of reactions in a metabolic genotype, the genotypes of a given phenotype typically form vast, connected, and unstructured sets -- genotype networks -- that nearly span the whole of genotype space. The robustness of metabolic phenotypes to random reaction removal in such spaces has a narrow distribution with a high mean. Different carbon sources differ in the number of metabolic genotypes in their genotype network; this number decreases as a genotype is required to be viable on increasing numbers of carbon sources, but much less than if metabolic reactions were used independently across different chemical environments. Conclusions: Our work shows that phenotype-preserving genotype networks have generic organizational properties and that these properties are insensitive to the number of reactions in metabolic genotypes.
△ Less
Submitted 10 April, 2010;
originally announced April 2010.
-
Enslaved Phase-Separation Fronts and Liesegang Pattern Formation
Authors:
E. M. Foard,
A. J. Wagner
Abstract:
We show that an enslaved phase-separation front moving with diffusive speeds U = C T^(-1/2) can leave alternating domains of increasing size in their wake. We find the size and spacing of these domains is identical to Liesegang patterns. For equal composition of the components we are able to predict the exact form of the pattern analytically. We also show that there is a critical value for C bel…
▽ More
We show that an enslaved phase-separation front moving with diffusive speeds U = C T^(-1/2) can leave alternating domains of increasing size in their wake. We find the size and spacing of these domains is identical to Liesegang patterns. For equal composition of the components we are able to predict the exact form of the pattern analytically. We also show that there is a critical value for C below which only two domains are formed. Our analytical predictions are verified by numerical simulations using a lattice Boltzmann method.
△ Less
Submitted 10 November, 2009;
originally announced November 2009.
-
Engineering ultralong spin coherence in two-dimensional hole systems at low temperatures
Authors:
T. Korn,
M. Kugler,
M. Griesbeck,
R. Schulz,
A. Wagner,
M. Kubová,
C. Gerl,
D. Schuh,
W. Wegscheider,
C. Schüller
Abstract:
For the realisation of scalable solid-state quantum-bit systems, spins in semiconductor quantum dots are promising candidates. A key requirement for quantum logic operations is a sufficiently long coherence time of the spin system. Recently, hole spins in III-V-based quantum dots were discussed as alternatives to electron spins, since the hole spin, in contrast to the electron spin, is not affec…
▽ More
For the realisation of scalable solid-state quantum-bit systems, spins in semiconductor quantum dots are promising candidates. A key requirement for quantum logic operations is a sufficiently long coherence time of the spin system. Recently, hole spins in III-V-based quantum dots were discussed as alternatives to electron spins, since the hole spin, in contrast to the electron spin, is not affected by contact hyperfine interaction with the nuclear spins. Here, we report a breakthrough in the spin coherence times of hole ensembles, confined in so called natural quantum dots, in narrow GaAs/AlGaAs quantum wells at temperatures below 500 mK. Consistently, time-resolved Faraday rotation and resonant spin amplification techniques deliver hole-spin coherence times, which approach in the low magnetic field limit values above 70 ns. The optical initialisation of the hole spin polarisation, as well as the interconnected electron and hole spin dynamics in our samples are well reproduced using a rate equation model.
△ Less
Submitted 12 February, 2010; v1 submitted 21 September, 2009;
originally announced September 2009.
-
Gate control of low-temperature spin dynamics in two-dimensional hole systems
Authors:
M. Kugler,
T. Andlauer,
T. Korn,
A. Wagner,
S. Fehringer,
R. Schulz,
M. Kubová,
C. Gerl,
D. Schuh,
W. Wegscheider,
P. Vogl,
C. Schüller
Abstract:
We have investigated spin and carrier dynamics of resident holes in high-mobility two-dimensional hole systems in GaAs/Al$_{0.3}$Ga$_{0.7}$As single quantum wells at temperatures down to 400 mK. Time-resolved Faraday and Kerr rotation, as well as time-resolved photoluminescence spectroscopy are utilized in our study. We observe long-lived hole spin dynamics that are strongly temperature dependen…
▽ More
We have investigated spin and carrier dynamics of resident holes in high-mobility two-dimensional hole systems in GaAs/Al$_{0.3}$Ga$_{0.7}$As single quantum wells at temperatures down to 400 mK. Time-resolved Faraday and Kerr rotation, as well as time-resolved photoluminescence spectroscopy are utilized in our study. We observe long-lived hole spin dynamics that are strongly temperature dependent, indicating that in-plane localization is crucial for hole spin coherence. By applying a gate voltage, we are able to tune the observed hole g factor by more than 50 percent. Calculations of the hole g tensor as a function of the applied bias show excellent agreement with our experimental findings.
△ Less
Submitted 1 July, 2009; v1 submitted 27 April, 2009;
originally announced April 2009.
-
Enslaved Phase-Separation Fronts in One-Dimensional Binary Mixtures
Authors:
E. M. Foard,
A. J. Wagner
Abstract:
Phase-separation fronts leave in their wakes morphologies that are substantially different from the morphologies formed in homogeneous phase-separation. In this paper we focus on fronts in binary mixtures that are enslaved phase-separation fronts, i.e. fronts that follow in the wake of a control-parameter front. In the one-dimensional case, which is the focus of this paper, the formed morphology…
▽ More
Phase-separation fronts leave in their wakes morphologies that are substantially different from the morphologies formed in homogeneous phase-separation. In this paper we focus on fronts in binary mixtures that are enslaved phase-separation fronts, i.e. fronts that follow in the wake of a control-parameter front. In the one-dimensional case, which is the focus of this paper, the formed morphology is deceptively simple: alternating domains of a regular size. However, determining the size of these domains as a function of the front speed and other system parameters is a non-trivial problem. We present an analytical solution for the case where no material is deposited ahead of the front and numerical solutions and scaling arguments for more general cases. Through these enslaved phase-separation fronts large domains can be formed that are practically unattainable in homogeneous one-dimensional phase-separation.
△ Less
Submitted 24 May, 2008;
originally announced May 2008.
-
Interface Width and Bulk Stability: requirements for the simulation of Deeply Quenched Liquid-Gas Systems
Authors:
A. J. Wagner,
C. M. Pooley
Abstract:
Simulations of liquid-gas systems with extended interfaces are observed to fail to give accurate results for two reasons: the interface can get ``stuck'' on the lattice or a density overshoot develops around the interface. In the first case the bulk densities can take a range of values, dependent on the initial conditions. In the second case inaccurate bulk densities are found. In this communica…
▽ More
Simulations of liquid-gas systems with extended interfaces are observed to fail to give accurate results for two reasons: the interface can get ``stuck'' on the lattice or a density overshoot develops around the interface. In the first case the bulk densities can take a range of values, dependent on the initial conditions. In the second case inaccurate bulk densities are found. In this communication we derive the minimum interface width required for the accurate simulation of liquid gas systems with a diffuse interface. We demonstrate this criterion for lattice Boltzmann simulations of a van der Waals gas. When combining this criterion with predictions for the bulk stability we can predict the parameter range that leads to stable and accurate simulation results. This allows us to identify parameter ranges leading to high density ratios of over 1000. This is despite the fact that lattice Boltzmann simulations of liquid-gas systems were believed to be restricted to modest density ratios of less than 20.
△ Less
Submitted 10 June, 2007;
originally announced June 2007.
-
A Symmetric Free Energy Based Multi-Component Lattice Boltzmann Method
Authors:
Qun Li,
A. J. Wagner
Abstract:
We present a lattice Boltzmann algorithm based on an underlying free energy that allows the simulation of the dynamics of a multicomponent system with an arbitrary number of components. The thermodynamic properties, such as the chemical potential of each component and the pressure of the overall system, are incorporated in the model. We derived a symmetrical convection diffusion equation for eac…
▽ More
We present a lattice Boltzmann algorithm based on an underlying free energy that allows the simulation of the dynamics of a multicomponent system with an arbitrary number of components. The thermodynamic properties, such as the chemical potential of each component and the pressure of the overall system, are incorporated in the model. We derived a symmetrical convection diffusion equation for each component as well as the Navier Stokes equation and continuity equation for the overall system. The algorithm was verified through simulations of binary and ternary systems. The equilibrium concentrations of components of binary and ternary systems simulated with our algorithm agree well with theoretical expectations.
△ Less
Submitted 26 April, 2007;
originally announced April 2007.
-
Simulations of strongly phase-separated liquid-gas systems
Authors:
A. J. Wagner,
C. M. Pooley
Abstract:
Lattice Boltzmann simulations of liquid-gas systems are believed to be restricted to modest density ratios of less than 10. In this article we show that reducing the speed of sound and, just as importantly, the interfacial contributions to the pressure allows lattice Boltzmann simulations to achieve high density ratios of 1000 or more. We also present explicit expressions for the limits of the p…
▽ More
Lattice Boltzmann simulations of liquid-gas systems are believed to be restricted to modest density ratios of less than 10. In this article we show that reducing the speed of sound and, just as importantly, the interfacial contributions to the pressure allows lattice Boltzmann simulations to achieve high density ratios of 1000 or more. We also present explicit expressions for the limits of the parameter region in which the method gives accurate results. There are two separate limiting phenomena. The first is the stability of the bulk liquid phase. This consideration is specific to lattice Boltzmann methods. The second is a general argument for the interface discretization that applies to any diffuse interface method.
△ Less
Submitted 22 August, 2006;
originally announced August 2006.
-
Electrostatic interactions across a charged lipid bilayer
Authors:
Alexander J. Wagner,
Sylvio May
Abstract:
We present theoretical work in which the degree of electrostatic coupling across a charged lipid bilayer in aqueous solution is analyzed on the basis of nonlinear Poisson-Boltzmann theory. In particular, we consider the electrostatic interaction of a single, large macroion with the two apposed leaflets of an oppositely charged lipid bilayer where the macroion is allowed to optimize its distance…
▽ More
We present theoretical work in which the degree of electrostatic coupling across a charged lipid bilayer in aqueous solution is analyzed on the basis of nonlinear Poisson-Boltzmann theory. In particular, we consider the electrostatic interaction of a single, large macroion with the two apposed leaflets of an oppositely charged lipid bilayer where the macroion is allowed to optimize its distance to the membrane. Three regimes are identified: a weak and a high macroion charge regime, separated by a regime of close macroion-membrane contact for intermediate charge densities. The corresponding free energies are used to estimate the degree of electrostatic coupling in a lamellar cationic lipid-DNA complex. That is, we calculate to what extent the one-dimensional DNA arrays in a sandwich-like lipoplex interact across the cationic membranes. We find that, in spite of the low dielectric constant inside a lipid membranes, there can be a significant electrostatic contribution to the experimentally observed cross-bilayer orientational ordering of the DNA arrays. Our approximate analytical model is complemented and supported by numerical calculations of the electrostatic potentials and free energies of the lamellar lipoplex geometry. To this end, we solve the nonlinear Poisson-Boltzmann equation within a unit cell of the lamellar lipoplex using a new lattice Boltzmann method.
△ Less
Submitted 27 July, 2006;
originally announced July 2006.
-
Thermodynamic consistency of liquid-gas lattice Boltzmann simulations
Authors:
A. J. Wagner
Abstract:
Lattice Boltzmann simulations have been very successful in simulating liquid-gas and other multi-phase fluid systems. However, the underlying second order analysis of the equation of motion has long been known to be insufficient to consistently derive the fourth order terms that are necessary to represent an extended interface. These same terms are also responsible for thermodynamic consistency,…
▽ More
Lattice Boltzmann simulations have been very successful in simulating liquid-gas and other multi-phase fluid systems. However, the underlying second order analysis of the equation of motion has long been known to be insufficient to consistently derive the fourth order terms that are necessary to represent an extended interface. These same terms are also responsible for thermodynamic consistency, i.e. to obtain a true equilibrium solution with both a constant chemical potential and a constant pressure. In this article we present an equilibrium analysis of non-ideal lattice Boltzmann methods of sufficient order to identify those higher order terms that lead to a lack of thermodynamic consistency. We then introduce a thermodynamically consistent forcing method.
△ Less
Submitted 22 August, 2006; v1 submitted 4 July, 2006;
originally announced July 2006.
-
Slip-controlled thin film dynamics
Authors:
R. Fetzer,
M. Rauscher,
A. Münch,
B. A. Wagner,
K. Jacobs
Abstract:
In this study, we present a novel method to assess the slip length and the viscosity of thin films of highly viscous Newtonian liquids. We quantitatively analyse dewetting fronts of low molecular weight polystyrene melts on Octadecyl- (OTS) and Dodecyltrichlorosilane (DTS) polymer brushes. Using a thin film (lubrication) model derived in the limit of large slip lengths, we can extract slip lengt…
▽ More
In this study, we present a novel method to assess the slip length and the viscosity of thin films of highly viscous Newtonian liquids. We quantitatively analyse dewetting fronts of low molecular weight polystyrene melts on Octadecyl- (OTS) and Dodecyltrichlorosilane (DTS) polymer brushes. Using a thin film (lubrication) model derived in the limit of large slip lengths, we can extract slip length and viscosity. We study polymer films with thicknesses between 50 nm and 230 nm and various temperatures above the glass transition. We find slip lengths from 100 nm up to 1 micron on OTS and between 300 nm and 10 microns on DTS covered silicon wafers. The slip length decreases with temperature. The obtained values for the viscosity are consistent with independent measurements.
△ Less
Submitted 17 March, 2006;
originally announced March 2006.
-
Incommensurate magnetic ordering in Cu2Te2O5X2 (X=Cl, Br) studied by single crystal neutron diffraction
Authors:
O. Zaharko,
H. Ronnow,
J. Mesot,
S. J. Crowe,
D. M^cK. Paul,
P. J. Brown,
A. Daoud-Aladine,
A. Meents,
A. Wagner,
M. Prester,
H. Berger
Abstract:
Polarized and unpolarized neutron diffraction studies have been carried out on single crystals of the coupled spin tetrahedra systems Cu2Te2O5X2 (X=Cl, Br). A model of the magnetic structure associated with the propagation vectors k'Cl ~ -0.150,0.422,1/2 and k'Br ~ -0.172,0.356,1/2 and stable below TN=18 K for X=Cl and TN=11 K for X=Br is proposed. A feature of the model, common to both the brom…
▽ More
Polarized and unpolarized neutron diffraction studies have been carried out on single crystals of the coupled spin tetrahedra systems Cu2Te2O5X2 (X=Cl, Br). A model of the magnetic structure associated with the propagation vectors k'Cl ~ -0.150,0.422,1/2 and k'Br ~ -0.172,0.356,1/2 and stable below TN=18 K for X=Cl and TN=11 K for X=Br is proposed. A feature of the model, common to both the bromide and chloride, is a canted coplanar motif for the 4 Cu2+ spins on each tetrahedron which rotates on a helix from cell to cell following the propagation vector. The Cu2+magnetic moment determined for X=Br, 0.395(5)muB, is significantly less than for X=Cl, 0.88(1)muB at 2K. The magnetic structure of the chloride associated with the wave-vector k' differs from that determined previously for the wave vector k~0.150,0.422,1/2 [O. Zaharko et.al. Phys. Rev. Lett. 93, 217206 (2004)].
△ Less
Submitted 23 December, 2005;
originally announced December 2005.
-
Physical and Computational Scaling Issues in Lattice Boltzmann Simulations of Binary Fluid Mixtures
Authors:
M. E. Cates,
J. -C. Desplat,
P. Stansell,
A. J. Wagner,
K. Stratford,
R. Adhikari,
I. Pagonabarraga
Abstract:
We describe some scaling issues that arise when using lattice Boltzmann methods to simulate binary fluid mixtures -- both in the presence and in the absence of colloidal particles. Two types of scaling problem arise: physical and computational. Physical scaling concerns how to relate simulation parameters to those of the real world. To do this effectively requires careful physics, because (in co…
▽ More
We describe some scaling issues that arise when using lattice Boltzmann methods to simulate binary fluid mixtures -- both in the presence and in the absence of colloidal particles. Two types of scaling problem arise: physical and computational. Physical scaling concerns how to relate simulation parameters to those of the real world. To do this effectively requires careful physics, because (in common with other methods) lattice Boltzmann cannot fully resolve the hierarchy of length, energy and time scales that arise in typical flows of complex fluids. Care is needed in deciding what physics to resolve and what to leave unresolved, particularly when colloidal particles are present in one or both of two fluid phases. This influences steering of simulation parameters such as fluid viscosity and interfacial tension. When the physics is anisotropic (for example, in systems under shear) careful adaptation of the geometry of the simulation box may be needed; an example of this, relating to our study of the effect of colloidal particles on the Rayleigh-Plateau instability of a fluid cylinder, is described. The second and closely related set of scaling issues are computational in nature: how do you scale up simulations to very large lattice sizes? The problem is acute for systems undergoing shear flow. Here one requires a set of blockwise co-moving frames to the fluid, each connected to the next by a Lees-Edwards like boundary condition. These matching planes lead to small numerical errors whose cumulative effects can become severe; strategies for minimising such effects are discussed.
△ Less
Submitted 18 November, 2004;
originally announced November 2004.
-
Investigation of Galilean Invariance of multi-phase lattice Boltzmann methods
Authors:
A. J. Wagner,
Q. Li
Abstract:
We examine the Galilean invariance of standard lattice Boltzmann methods for two-phase fluids. We show that the known Galilean invariant term that is cubic in the velocities, and is usually neglected, is the main source of Galilean invariance violations. We show that incorporating a correction term can improve the Galilean invariance of the method by up to an order of magnitude. Surprisingly inc…
▽ More
We examine the Galilean invariance of standard lattice Boltzmann methods for two-phase fluids. We show that the known Galilean invariant term that is cubic in the velocities, and is usually neglected, is the main source of Galilean invariance violations. We show that incorporating a correction term can improve the Galilean invariance of the method by up to an order of magnitude. Surprisingly incorporating this correction term can also noticeably increase the range of stability for multi-phase algorithms. We found that this is true for methods in which the non-ideality is incorporated by a forcing term as well as methods in which non-ideality is directly incorporated in a non-ideal pressure tensor.
△ Less
Submitted 21 October, 2004;
originally announced October 2004.
-
Simulating Colloid Hydrodynamics with Lattice Boltzmann
Authors:
M. E. Cates,
K. Stratford,
R. Adhikari,
P. Stansell,
J. -C. Desplat,
I. Pagonabarraga,
A. J. Wagner
Abstract:
We present a progress report on our work on lattice Boltzmann methods for colloidal suspensions. We focus on the treatment of colloidal particles in binary solvents and on the inclusion of thermal noise. For a benchmark problem of colloids sedimenting and becoming trapped by capillary forces at a horizontal interface between two fluids, we discuss the criteria for parameter selection, and addres…
▽ More
We present a progress report on our work on lattice Boltzmann methods for colloidal suspensions. We focus on the treatment of colloidal particles in binary solvents and on the inclusion of thermal noise. For a benchmark problem of colloids sedimenting and becoming trapped by capillary forces at a horizontal interface between two fluids, we discuss the criteria for parameter selection, and address the inevitable compromise between computational resources and simulation accuracy.
△ Less
Submitted 27 April, 2004;
originally announced April 2004.