-
Noise reduction by bias cooling in gated Si/SixGe1-x quantum dots
Authors:
Julian Ferrero,
Thomas Koch,
Sonja Vogel,
Daniel Schroller,
Viktor Adam,
Ran Xue,
Inga Seidler,
Lars R. Schreiber,
Hendrik Bluhm,
Wolfgang Wernsdorfer
Abstract:
Silicon-Germanium heterostructures are a promising quantum circuit platform, but crucial aspects as the long-term charge dynamics and cooldown-to-cooldown variations are still widely unexplored quantitatively. In this letter we present the results of an extensive bias cooling study performed on gated silicon-germanium quantum dots with an Al2O3-dielectric. Over 80 cooldowns were performed in the c…
▽ More
Silicon-Germanium heterostructures are a promising quantum circuit platform, but crucial aspects as the long-term charge dynamics and cooldown-to-cooldown variations are still widely unexplored quantitatively. In this letter we present the results of an extensive bias cooling study performed on gated silicon-germanium quantum dots with an Al2O3-dielectric. Over 80 cooldowns were performed in the course of our investigations. The performance of the devices is assessed by low-frequency charge noise measurements in the band of 200 micro Hertz to 10 milli Hertz. We measure the total noise power as a function of the applied voltage during cooldown in four different devices and find a minimum in noise at 0.7V bias cooling voltage for all observed samples. We manage to decrease the total noise power median by a factor of 6 and compute a reduced tunneling current density using Schrödinger-Poisson simulations. Furthermore, we show the variation in noise from the same device in the course of eleven different cooldowns performed under the nominally same conditions.
△ Less
Submitted 8 May, 2024; v1 submitted 30 April, 2024;
originally announced May 2024.
-
Deformation and dislocation evolution in body-centered-cubic single- and polycrystal tantalum
Authors:
Seunghyeon Lee,
Hansohl Cho,
Curt A. Bronkhorst,
Reeju Pokharel,
Donald W. Brown,
Bjørn Clausen,
Sven C. Vogel,
Veronica Anghel,
George T. Gray III,
Jason R. Mayeur
Abstract:
A physically-informed continuum crystal plasticity model is presented to elucidate the deformation mechanisms and dislocation evolution in body-centered-cubic (bcc) tantalum widely used as a key structural material for mechanical and thermal extremes. We show our unified structural modeling framework informed by mesoscopic dislocation dynamics simulations is capable of capturing salient features o…
▽ More
A physically-informed continuum crystal plasticity model is presented to elucidate the deformation mechanisms and dislocation evolution in body-centered-cubic (bcc) tantalum widely used as a key structural material for mechanical and thermal extremes. We show our unified structural modeling framework informed by mesoscopic dislocation dynamics simulations is capable of capturing salient features of the large inelastic behavior of tantalum at quasi-static (10$^{-3}$ s$^{-1}$) to extreme strain rates (5000 s$^{-1}$) and at room temperature and higher (873K) at both single- and polycrystal levels. We also present predictive capabilities of our model for microstructural evolution in the material. To this end, we investigate the effects of dislocation interactions on slip activities, instability and strain-hardening behavior at the single crystal level. Furthermore, ex situ measurements on crystallographic texture evolution and dislocation density growth are carried out for the polycrystal tantalum specimens at increasing strains. Numerical simulation results also support that our modeling framework is capable of capturing the main features of the polycrystal behavior over a wide range of strains, strain rates and temperatures. The theoretical, experimental and numerical results at both single- and polycrystal levels provide critical insight into the underlying physical pictures for micro- and macroscopic responses and their relations in this important class of refractory bcc materials undergoing severe inelastic deformations.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
High-Pressure Na3(N2)4, Ca3(N2)4, Sr3(N2)4, and Ba(N2)3 Featuring Nitrogen Dimers with Non-Integer Charges and Anion-Driven Metallicity
Authors:
Dominique Laniel,
Bjoern Winkler,
Timofey Fedotenko,
Alena Aslandukova,
Andrey Aslandukov,
Sebastian Vogel,
Thomas Meier,
Maxim Bykov,
Stella Chariton,
Konstantin Glazyrin,
Victor Milman,
Vitali Prakapenka,
Wolfgang Schnick,
Leonid Dubrovinsky,
Natalia Dubrovinskaia
Abstract:
Charged nitrogen dimers are ubiquitous in high-pressure binary metal-nitrogen systems. They are known to possess integer formal charges x varying from one through four. Here, we present the investigation of the binary alkali- and alkaline earth metal-nitrogen systems, Na-N, Ca-N, Sr-N, Ba-N to 70 GPa. We report on compounds-Na3(N2)4, Ca3(N2)4, Sr3(N2)4, and Ba(N2)3-featuring charged nitrogen dimer…
▽ More
Charged nitrogen dimers are ubiquitous in high-pressure binary metal-nitrogen systems. They are known to possess integer formal charges x varying from one through four. Here, we present the investigation of the binary alkali- and alkaline earth metal-nitrogen systems, Na-N, Ca-N, Sr-N, Ba-N to 70 GPa. We report on compounds-Na3(N2)4, Ca3(N2)4, Sr3(N2)4, and Ba(N2)3-featuring charged nitrogen dimers with paradigm-breaking non-integer charges, x = 0.67, 0.75 and 1.5. The metallic nature of all four compounds is deduced from ab initio calculations. The conduction electrons occupy the pi* antibonding orbitals of the charged nitrogen dimers that results in anion-driven metallicity. Delocalization of these electrons over the pi* antibonding states enables the non-integer electron count of the dinitrogen species. Anion-driven metallicity is expected to be found among a variety of compounds with homoatomic anions (e.g., polynitrides, carbides, and oxides), with the conduction electrons playing a decisive role in their properties.
△ Less
Submitted 24 May, 2021;
originally announced May 2021.
-
High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re$_{2}$(N$_{2}$)N$_{2}$ stable at ambient conditions
Authors:
Maxim Bykov,
Stella Chariton,
Hongzhan Fei,
Timofey Fedotenko,
Georgios Aprilis,
Alena V. Ponomareva,
Ferenc Tasnádi,
Igor A. Abrikosov,
Benoit Merle,
Patrick Feldner,
Sebastian Vogel,
Wolfgang Schnick,
Vitali B. Prakapenka,
Eran Greenberg,
Michael Hanfland,
Anna Pakhomova,
Hanns-Peter Liermann,
Tomoo Katsura,
Natalia Dubrovinskaia,
Leonid Dubrovinsky
Abstract:
Here we report the synthesis of metallic, ultraincompressible (bulk modulus $K_{0}$ = 428(10) GPa) and very hard (nanoindentation hardness 36.7(8) GPa) rhenium (V) nitride pernitride Re$_{2}$(N$_{2}$)N$_{2}$. While the empirical chemical formula of the compound, ReN$_{2}$, is the same as for other known transition metals pernitrides, e.g. IrN$_{2}$, PtN$_{2}$, PdN$_{2}$ and OsN$_{2}$, its crystal…
▽ More
Here we report the synthesis of metallic, ultraincompressible (bulk modulus $K_{0}$ = 428(10) GPa) and very hard (nanoindentation hardness 36.7(8) GPa) rhenium (V) nitride pernitride Re$_{2}$(N$_{2}$)N$_{2}$. While the empirical chemical formula of the compound, ReN$_{2}$, is the same as for other known transition metals pernitrides, e.g. IrN$_{2}$, PtN$_{2}$, PdN$_{2}$ and OsN$_{2}$, its crystal chemistry is unique. The known pernitrides of transition metals consist of a metal in the oxidation state +IV and pernitride anions N$_{2}^{4-}$. ReN$_{2}$ contains both pernitride N$_{2}^{4-}$ and discrete N$^{3-}$ anions, which explains its exceptional properties. Moreover, in the original experimental synthesis of Re$_{2}$(N$_{2}$)N$_{2}$ performed in a laser-heated diamond anvil cell via a direct reaction between rhenium and nitrogen at pressures from 40 to 90 GPa we observed that the material was recoverable at ambient conditions. Consequently, we developed a route to scale up its synthesis through a reaction between rhenium and ammonium azide, NH$_{4}$N$_{3}$, in a large-volume press at 33 GPa. Our work resulted not only in a discovery of a novel material with unusual crystal chemistry and a set of properties attractive for potential applications, but also demonstrated a feasibility of surmounting conceptions common in material sciences.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
High-temperature neutron diffraction and first-principles study of temperature-dependent crystal structures and atomic vibrations in Ti3AlC2, Ti2AlC, and Ti5Al2C3
Authors:
Nina J. Lane,
Sven C. Vogel,
El'ad N. Caspi,
Michel W. Barsoum
Abstract:
Herein we report on the thermal expansions and temperature-dependent crystal structures of select ternary carbide MAX phases in the Ti-Al-C phase diagram in the 100-1000 deg C temperature range. A bulk sample containing 38 wt.% Ti5Al2C3, "523"),…
▽ More
Herein we report on the thermal expansions and temperature-dependent crystal structures of select ternary carbide MAX phases in the Ti-Al-C phase diagram in the 100-1000 deg C temperature range. A bulk sample containing 38 wt.% Ti5Al2C3, "523"), $32 wt.% Ti2AlC ("211"), 18 wt.% Ti3AlC2 ("312"), and 12 wt.% (Ti{0.5}Al{0.5})Al is studied by Rietveld analysis of high-temperature neutron diffraction data. We also report on the same for a single-phase sample of Ti$_3$AlC$_2$ for comparison. The thermal expansions of all the MAX phases studied are higher in the $c$ direction than in the $a$ direction. The bulk expansion coefficients - 9.3 x 10^-6 for Ti5Al2C3, 9.2 x 10^-6 for Ti2AlC, and 9.0 x 10^-6 for Ti3AlC2 - are comparable within one standard deviation of each other. In Ti5Al2C3, the dimensions of the Ti-C octahedra for the 211-like and 312-like regions are comparable to the Ti-C octahedra in Ti2AlC and Ti3AlC2, respectively. The isotropic mean-squared atomic displacement parameters are highest for the Al atoms in all three phases, and the values predicted from first-principles phonon calculations agree well with those measured.
△ Less
Submitted 30 March, 2013;
originally announced April 2013.
-
Neutron Diffraction Measurements and First Principles Study of Thermal Motion of Atoms in Select M_{n+1}AX_n and Binary MX Transition Metal Carbide Phases
Authors:
Nina J. Lane,
Sven C. Vogel,
Gilles Hug,
Atsushi Togo,
Laurent Chaput,
Lars Hultman,
Michel W. Barsoum
Abstract:
Herein, we compare the thermal vibrations of atoms in select ternary carbides with the formula Mn+1AXn ("MAX phases," M = Ti, Cr; A = Al, Si, Ge; X = C, N) as determined from first principles phonon calculations to those obtained from high-temperature neutron powder diffraction studies. The transition metal carbides TiC, TaC, and WC are also studied to test our methodology on simpler carbides. Goo…
▽ More
Herein, we compare the thermal vibrations of atoms in select ternary carbides with the formula Mn+1AXn ("MAX phases," M = Ti, Cr; A = Al, Si, Ge; X = C, N) as determined from first principles phonon calculations to those obtained from high-temperature neutron powder diffraction studies. The transition metal carbides TiC, TaC, and WC are also studied to test our methodology on simpler carbides. Good qualitative and quantitative agreement is found between predicted and experimental values for the binary carbides. For all the MAX phases studied - Ti3SiC2, Ti3GeC2, Ti2AlN, Cr2GeC and Ti4AlN3 - density functional theory calculations predict that the A element vibrates with the highest amplitude and does so anisotropically with a higher amplitude within the basal plane, which is in line with earlier results from high-temperature neutron diffraction studies. In some cases, there are quantitative differences in the absolute values between the theoretical and experimental atomic displacement parameters, such as reversal of anisotropy or a systematic offset of temperature-dependent atomic displacement parameters. The mode-dependent Grüneisen parameters are also computed to explore the anharmonicity in the system.
△ Less
Submitted 29 October, 2012;
originally announced October 2012.
-
High-pressure neutron study of the morphotropic PZT: phase transitions in a two-phase system
Authors:
J. Frantti,
Y. Fujioka,
J. Zhang,
S. Wang,
S. C. Vogel,
R. M. Nieminen,
A. M. Asiri,
Y. Zhao,
A. Y. Obaid
Abstract:
In piezoelectric ceramics the changes in the phase stabilities versus stress and temperature in the vicinity of the phase boundary play a central role. The present study was dedicated to the classical piezoelectric, lead-zirconate-titanate (PZT) ceramic with composition Pb(Zr$_{0.54}$Ti$_{0.46}$)O$_3$ at the Zr-rich side of the morphotropic phase boundary at which both intrinsic and extrinsic cont…
▽ More
In piezoelectric ceramics the changes in the phase stabilities versus stress and temperature in the vicinity of the phase boundary play a central role. The present study was dedicated to the classical piezoelectric, lead-zirconate-titanate (PZT) ceramic with composition Pb(Zr$_{0.54}$Ti$_{0.46}$)O$_3$ at the Zr-rich side of the morphotropic phase boundary at which both intrinsic and extrinsic contributions to piezoelectricity are significant. The pressure-induced changes in this two-phase (rhombohedral $R3c$+monoclinic $Cm$ at room temperature and $R3c+P4mm$ above 1 GPa pressures) system were studied by high-pressure neutron powder diffraction technique. The experiments show that applying pressure favors the $R3c$ phase, whereas the $Cm$ phase transforms continuously to the $P4mm$, which is favored at elevated temperatures due to the competing entropy term. The $Cm\rightarrow R3c$ phase transformation is discontinuous. The transformation contributes to the extrinsic piezoelectricity. An important contribution to the intrinsic piezoelectricity was revealed: a large displacement of the $B$ cations (Zr and Ti) with respect to the oxygen anions is induced by pressure. Above 600 K a phase transition to a cubic phase took place. Balance between the competing terms dictates the curvature of the phase boundary. After high-pressure experiments the amount of rhombohedral phase was larger than initially, suggesting that on the Zr-rich side of the phase boundary the monoclinic phase is metastable.
△ Less
Submitted 13 February, 2012;
originally announced February 2012.
-
How ripples turn into dots: modeling ion-beam erosion under oblique incidence
Authors:
Sebastian Vogel,
Stefan J. Linz
Abstract:
Pattern formation on semiconductor surfaces induced by low energetic ion-beam erosion under normal and oblique incidence is theoretically investigated using a continuum model in form of a stochastic, nonlocal, anisotropic Kuramoto-Sivashinsky equation. Depending on the size of the parameters this model exhibits hexagonally ordered dot, ripple, less regular and even rather smooth patterns. We inv…
▽ More
Pattern formation on semiconductor surfaces induced by low energetic ion-beam erosion under normal and oblique incidence is theoretically investigated using a continuum model in form of a stochastic, nonlocal, anisotropic Kuramoto-Sivashinsky equation. Depending on the size of the parameters this model exhibits hexagonally ordered dot, ripple, less regular and even rather smooth patterns. We investigate the transitional behavior between such states and suggest how transitions can be experimentally detected.
△ Less
Submitted 12 May, 2006; v1 submitted 16 September, 2005;
originally announced September 2005.
-
On continuum modeling of sputter erosion under normal incidence: interplay between nonlocality and nonlinearity
Authors:
Sebastian Vogel,
Stefan J. Linz
Abstract:
Under specific experimental circumstances, sputter erosion on semiconductor materials exhibits highly ordered hexagonal dot-like nanostructures. In a recent attempt to theoretically understand this pattern forming process, Facsko et al. [Phys. Rev. B 69, 153412 (2004)] suggested a nonlocal, damped Kuramoto-Sivashinsky equation as a potential candidate for an adequate continuum model of this self…
▽ More
Under specific experimental circumstances, sputter erosion on semiconductor materials exhibits highly ordered hexagonal dot-like nanostructures. In a recent attempt to theoretically understand this pattern forming process, Facsko et al. [Phys. Rev. B 69, 153412 (2004)] suggested a nonlocal, damped Kuramoto-Sivashinsky equation as a potential candidate for an adequate continuum model of this self-organizing process. In this study we theoretically investigate this proposal by (i) formally deriving such a nonlocal equation as minimal model from balance considerations, (ii) showing that it can be exactly mapped to a local, damped Kuramoto-Sivashinsky equation, and (iii) inspecting the consequences of the resulting non-stationary erosion dynamics.
△ Less
Submitted 5 April, 2005; v1 submitted 4 January, 2005;
originally announced January 2005.