-
Significantly Enhanced Vacancy Diffusion in Mn-containing Alloys
Authors:
Huaqing Guan,
Hanwen Cui,
Ning Ding,
Kuo Yang,
Siqi Jiang,
Yanfei Sui,
Yuanyuan Wang,
Fuyang Tian,
Zhe Li,
Shuai Wang,
Pengfei Zheng,
Chenyang Lu,
Qiu Xu,
Levente Vitos,
Shaosong Huang
Abstract:
Manipulating point defects for tailored macroscopic properties remains a formidable challenge in materials science. This study demonstrates a proof-of-principle for a universal law involving element Mn, significantly enhancing vacancy diffusion through an unprecedented anomalous Friedel Oscillations phenomenon, across most metals in the periodic table. The correlation between Mn-induced point-defe…
▽ More
Manipulating point defects for tailored macroscopic properties remains a formidable challenge in materials science. This study demonstrates a proof-of-principle for a universal law involving element Mn, significantly enhancing vacancy diffusion through an unprecedented anomalous Friedel Oscillations phenomenon, across most metals in the periodic table. The correlation between Mn-induced point-defect dynamic changes and intrinsic macro-properties is robustly validated through the first-principles theory and well-designed experiments. The physical origin stems from Mn's exceptionally large effective intra-elemental 3d electron interactions, surpassing the Coulomb attraction induced by vacancy and disrupting the electron screening effect. Given the ubiquitous nature of vacancies and their recognition as the most crucial defects influencing nearly all physical and mechanical properties of crystalline materials, this outcome may drive advances in a broad domain.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Superconducting transition temperatures of pure vanadium and vanadium-titanium alloys in the presence of dynamical electronic correlations
Authors:
D. Jones,
A. Östlin,
A. Weh,
F. Beiuseanu,
U. Eckern,
L. Vitos,
L. Chioncel
Abstract:
Ordinary superconductors are widely assumed insensitive to small concentrations of random nonmagnetic impurities, whereas strong disorder suppresses superconductivity, ultimately leading to a superconductor-insulator transition. In between these limiting cases, a most fascinating regime may emerge where disorder enhances superconductivity. This effect is discussed here for the $β$-phase of vanadiu…
▽ More
Ordinary superconductors are widely assumed insensitive to small concentrations of random nonmagnetic impurities, whereas strong disorder suppresses superconductivity, ultimately leading to a superconductor-insulator transition. In between these limiting cases, a most fascinating regime may emerge where disorder enhances superconductivity. This effect is discussed here for the $β$-phase of vanadium-titanium alloys. Disorder is modeled using the coherent potential approximation while local electronic interactions are treated using dynamical mean-field theory. The McMillan formula is employed to estimate the superconducting transition temperature, showing a maximum at a Ti concentration of around $0.33$ for a local Coulomb interaction $U$ in the range of $2$ to $3$ eV. Our calculations quantitatively agree with the experimentally observed concentration dependent increase of $T_c$, and its maximal value of about $20\%$.
△ Less
Submitted 19 March, 2024;
originally announced March 2024.
-
Site-specific atomic substitution in a giant magnetocaloric Fe$_2$P-type system
Authors:
Sagar Ghorai,
Johan Cedervall,
Rebecca Clulow,
Shuo Huang,
Tore Ericsson,
Lennart Häggström,
Vitalii Shtender,
Erna K. Delczeg-Czirjak,
Levente Vitos,
Olle Eriksson,
Martin Sahlberg,
Peter Svedlindh
Abstract:
Giant magnetocaloric (GMC) materials constitute a requirement for near room temperature magnetic refrigeration. (Fe,Mn)$_2$(P,Si) is a GMC compound with strong magnetoelastic coupling. The main hindrance towards application of this material is a comparably large temperature hysteresis, which can be reduced by metal site substitution with a nonmagnetic element. However, the (Fe,Mn)$_2$(P,Si) compou…
▽ More
Giant magnetocaloric (GMC) materials constitute a requirement for near room temperature magnetic refrigeration. (Fe,Mn)$_2$(P,Si) is a GMC compound with strong magnetoelastic coupling. The main hindrance towards application of this material is a comparably large temperature hysteresis, which can be reduced by metal site substitution with a nonmagnetic element. However, the (Fe,Mn)$_2$(P,Si) compound has two equally populated metal sites, the tetrahedrally coordinated $3f$ and the pyramidally coordinated $3g$ sites. The magnetic and magnetocaloric properties of such compounds are highly sensitive to the site specific occupancy of the magnetic atoms. Here we have attempted to study separately the effect of $3f$ and $3g$ site substitution with equal amounts of vanadium. Using formation energy calculations, the site preference of vanadium and its influence on the magnetic phase formation are described. A large difference in the isothermal entropy change (as high as 44\%) with substitution in the $3f$ and $3g$ sites is observed. The role of the lattice parameter change with temperature and the strength of the magnetoelastic coupling on the magnetic properties are highlighted.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
Structural characterization and electronic structure of Li$_{3}$ClO glasses for solid-state Li-ion batteries
Authors:
Young Won Choi,
Moyses Araujo,
Levente Vitos,
Raquel Lizárraga
Abstract:
Energy storage technologies that can meet the unprecedented demands of a sustainable energy system based on intermittent energy sources require new battery materials. We investigate high ionic conductors, Li$_3$ClO glasses. In the present work we use a first principles method to model the amorphous structure of the glass. We characterize the structure by means of radial distribution functions, rad…
▽ More
Energy storage technologies that can meet the unprecedented demands of a sustainable energy system based on intermittent energy sources require new battery materials. We investigate high ionic conductors, Li$_3$ClO glasses. In the present work we use a first principles method to model the amorphous structure of the glass. We characterize the structure by means of radial distribution functions, radial disctributions functions and coordination numbers. We compare to their crystalline counterparts. The electronic structure of the glass is compared to that of the crystalline material. The band gap of the glass appears to be slighly reduced compared to that of the crystal. We also investigate the chemical stability of the glass against Li metal electrode. The electrochemical stability of the glassy electrolite is evaluated against Li metal.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
-
Predicting grain boundary energies of complex alloys from ab initio calculations
Authors:
Changle Li,
Song Lu,
Levente Vitos
Abstract:
Investigating the grain boundary energies of pure fcc metals and their surface energies obtained from ab initio modeling, we introduce a robust method to estimate the grain boundary energies for complex multicomponent alloys. The input parameter is the surface energy of the alloy, which can easily be accessed by modern ab initio calculations based on density functional theory. The method is demons…
▽ More
Investigating the grain boundary energies of pure fcc metals and their surface energies obtained from ab initio modeling, we introduce a robust method to estimate the grain boundary energies for complex multicomponent alloys. The input parameter is the surface energy of the alloy, which can easily be accessed by modern ab initio calculations based on density functional theory. The method is demonstrated in the case of paramagnetic Fe-Cr-Ni alloys for which reliable grain boundary data is available.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Data-driven design of a new class of rare-earth free permanent magnets
Authors:
Alena Vishina,
Daniel Hedlund,
Vitalii Shtender,
Erna K. Delczeg-Czirjak,
Simon R. Larsen,
Olga Yu. Vekilova,
Shuo Huang,
Levente Vitos,
Peter Svedlindh,
Martin Sahlberg,
Olle Eriksson,
Heike C. Herper
Abstract:
A new class of rare-earth-free permanent magnets is proposed. The parent compound of this class is Co$_3$Mn$_2$Ge, and its discovery is the result of first principles theory combined with experimental synthesis and characterisation. The theory is based on a high-throughput/data-mining search among materials listed in the ICSD database. From ab-initio theory of the defect free material it is predic…
▽ More
A new class of rare-earth-free permanent magnets is proposed. The parent compound of this class is Co$_3$Mn$_2$Ge, and its discovery is the result of first principles theory combined with experimental synthesis and characterisation. The theory is based on a high-throughput/data-mining search among materials listed in the ICSD database. From ab-initio theory of the defect free material it is predicted that the saturation magnetization is 1.71 T, the uniaxial magnetocrystalline anisotropy is 1.44 MJ/m$^3$, and the Curie temperature is 700 K. Co$_3$Mn$_2$Ge samples were then synthesized and characterised with respect to structure and magnetism. The crystal structure was found to be the MgZn$_2$-type, with partial disorder of Co and Ge on the crystallographic lattice sites. From magnetization measurements a saturation polarization of 0.86 T at 10 K was detected, together with a uniaxial magnetocrystalline anisotropy constant of 1.18 MJ/m$^3$, and the Curie temperature of $T_{\rm C}$ = 359 K. These magnetic properties make Co$_3$Mn$_2$Ge a very promising material as a rare-earth free permanent magnet, and since we can demonstrate that magnetism depends critically on the amount of disorder of the Co and Ge atoms, a further improvement of the magnetism is possible. From the theoretical works, a substitution of Ge by neighboring elements suggest two other promising materials - Co$_3$Mn$_2$Al and Co$_3$Mn$_2$Ga. We demonstrate here that the class of compounds based on $T_3$Mn$_2$X (T = Co or alloys between Fe and Ni; X=Ge, Al or Ga) in the MgZn$_2$ structure type, form a new class of rare-earth free permanent magnets with very promising performance.
△ Less
Submitted 26 January, 2021;
originally announced January 2021.
-
Can experiment determine the stacking fault energy of metastable alloys?
Authors:
Xun Suna,
Song Lu,
Ruiwen Xie,
Xianghai An,
Wei Li,
Tianlong Zhang,
Chuanxin Liang,
Xiangdong Ding,
Yunzhi Wang,
Hualei Zhang,
Levente Vitos
Abstract:
Stacking fault energy (SFE) plays an important role in deformation mechanisms and mechanical properties of face-centered cubic (fcc) metals and alloys. In metastable fcc alloys, the SFEs determined from density functional theory (DFT) calculations and experimental methods often have opposite signs. Here, we show that the negative SFE by DFT reflects the thermodynamic instability of the fcc phase r…
▽ More
Stacking fault energy (SFE) plays an important role in deformation mechanisms and mechanical properties of face-centered cubic (fcc) metals and alloys. In metastable fcc alloys, the SFEs determined from density functional theory (DFT) calculations and experimental methods often have opposite signs. Here, we show that the negative SFE by DFT reflects the thermodynamic instability of the fcc phase relative to the hexagonal close-packed one; while the experimentally determined SFEs are restricted to be positive by the models behind the indirect measurements. We argue that the common models underlying the experimental measurements of SFE fail in metastable alloys. In various concentrated solid solutions, we demonstrate that the SFEs obtained by DFT calculations correlate well with the primary deformation mechanisms observed experimentally, showing a better resolution than the experimentally measured SFEs. Furthermore, we believe that the negative SFE is important for understanding the abnormal behaviors of partial dislocations in metastable alloys under deformation. The present work advances the fundamental understanding of SFE and its relation to plastic deformations, and sheds light on future alloy design by physical metallurgy.
△ Less
Submitted 20 May, 2020;
originally announced May 2020.
-
Pressure effect on the order-disorder transformation in L1$_0$ FeNi
Authors:
Li-Yun Tian,
Olle Eriksson,
Levente Vitos
Abstract:
The ordered phase of the FeNi system is known to have promising magnetic properties as a rare-earth-free permanent magnet. Understanding the parameter space that controls the order-disorder transformation is important to find growth conditions that stabilize the $L1_0$ phase. Magnetic properties and chemical order-disorder transformation of FeNi are investigated as a function of lattice expansion…
▽ More
The ordered phase of the FeNi system is known to have promising magnetic properties as a rare-earth-free permanent magnet. Understanding the parameter space that controls the order-disorder transformation is important to find growth conditions that stabilize the $L1_0$ phase. Magnetic properties and chemical order-disorder transformation of FeNi are investigated as a function of lattice expansion using first-principles theory. Thermodynamic and magnetic calculations are performed using long-range order parameters, which is used to find the ordering temperature. Negative pressure promotes ordering and thus synthetic routes involving an increase in volume is expected to expand the stability field of the $L1_0$ phase.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
Ductile and brittle crack-tip response in equimolar refractory high-entropy alloys
Authors:
Xiaoqing Li,
Wei Li,
Douglas L. Irving,
Lajos K. Varga,
Levente Vitos,
Stephan Schönecker
Abstract:
Understanding the strengthening and deformation mechanisms in refractory high-entropy alloys (HEAs), proposed as new high-temperature material, is required for improving their typically insufficient room-temperature ductility. Here, density-functional theory simulations and a continuum mechanics analysis were conducted to systematically investigate the competition between cleavage decohesion and d…
▽ More
Understanding the strengthening and deformation mechanisms in refractory high-entropy alloys (HEAs), proposed as new high-temperature material, is required for improving their typically insufficient room-temperature ductility. Here, density-functional theory simulations and a continuum mechanics analysis were conducted to systematically investigate the competition between cleavage decohesion and dislocation emission from a crack tip in the body-centered cubic refractory HEAs HfNbTiZr, MoNbTaVW, MoNbTaW, MoNbTiV, and NbTiVZr. This crack-tip competition is evaluated for tensile loading and a totality of 15 crack configurations and slip systems. Our results predict that dislocation plasticity at the crack tip is generally unfavorable -- although the competition is close for some crack orientations, suggesting intrinsic brittleness and low crack-tip fracture toughness in these five HEAs at zero temperature. Fluctuations in local alloy composition, investigated for HfNbTiZr, can locally reduce the resistance to dislocation emission for a slip system relative to the configuration average of that slip system, but do not change the dominant crack-tip response. In the case of single-crystal MoNbTaW, where an experimental, room-temperature fracture-toughness value is available for a crack on a \{100\} plane, theoretical and experimental results agree favorably. Factors that may limit the agreement are discussed. We survey the effect of material anisotropy on preferred crack tip orientations, which are found to be alloy specific. Mixed-mode loadings are found to shift the competition in favor of cleavage or dislocation nucleation, depending on crack configuration and amplified by the effect of material anisotropy on crack tip stresses.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Designing transformation-induced plasticity and twinning-induced plasticity Cr-Co-Ni medium entropy alloys: theory and experiment
Authors:
Zhibiao Yang,
Song Lu,
Yangzhong Tian,
Zijian Gu,
Huahai Mao,
Jian Sun,
Levente Vitos
Abstract:
In order to efficiently explore the nearly infinite composition space in multicomponent solid solution alloys, it is important to establish predictive design strategies and use computation-aided methods. In the present work, we demonstrated the density functional theory calculations informed design routes for realizing transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP)…
▽ More
In order to efficiently explore the nearly infinite composition space in multicomponent solid solution alloys, it is important to establish predictive design strategies and use computation-aided methods. In the present work, we demonstrated the density functional theory calculations informed design routes for realizing transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP) in Cr-Co-Ni medium entropy alloys (MEAs). We systematically studied the effects of magnetism and chemical composition on the generalized stacking fault energy surface (gamma-surface) and showed that both chemistry and the coupled magnetic state strongly affect the gamma-surface, consequently, the primary deformation modes. Based on the calculated effective energy barriers for the competing deformation modes, we constructed composition and magnetism dependent deformation maps at both room and cryogenic temperatures. Accordingly, we proposed various design routes for achieving desired primary deformation modes in the ternary Cr-Co-Ni alloys. The deformation mechanisms predicted by our theoretical models are in nice agreement with available experimental observations in literature. Furthermore, we fabricated two non-equiatomic Cr-Co-Ni MEAs possessing the designed TWIP and TRIP effects, showing excellent combinations of tensile strength and ductility.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
Dissociated dislocation-mediated carbon transport and diffusion in austenitic iron
Authors:
Ruiwen Xie,
Song Lu,
Wei Li,
Yanzhong Tian,
Levente Vitos
Abstract:
Dislocation-solute interaction plays fundamental roles in mechanical properties of alloys. Here, we disclose the essential features of dislocation-carbon interaction in austenitic Fe at the atomistic scale. We show that passage of a Shockley partial dislocation in face-centered cubic iron is able to move carbon atoms on the slip plane forward by one Burgers vector, revealing a novel dissociated di…
▽ More
Dislocation-solute interaction plays fundamental roles in mechanical properties of alloys. Here, we disclose the essential features of dislocation-carbon interaction in austenitic Fe at the atomistic scale. We show that passage of a Shockley partial dislocation in face-centered cubic iron is able to move carbon atoms on the slip plane forward by one Burgers vector, revealing a novel dissociated dislocation-mediated transport mechanism. This mechanism is induced by shear, which is distinct from the normal thermally activated diffusion process. Furthermore, we show that there exists a fast diffusion channel with significantly reduced diffusion energy barrier in the partial dislocation core, which is highly localized and directional. These inherent geometrical features are crucial for understanding the dependence of the diffusivity of dislocation pipe diffusion on the character of dislocations; most importantly, they can result in unbalanced pinning effect on the leading and trailing partials in a mixed dislocation, consequently facilitating stacking fault formation and deformation twinning. This explains the controversial effects of carbon on deformation twinning observed in various alloys. Our findings pave the road to tune mechanical properties of materials by manipulating dislocation-interstitial interaction.
△ Less
Submitted 17 January, 2020;
originally announced January 2020.
-
Ab initio typical medium theory of substitutional disorder
Authors:
A. Östlin,
Y. Zhang,
H. Terletska,
F. Beiuseanu,
V. Popescu,
K. Byczuk,
L. Vitos,
M. Jarrell,
D. Vollhardt,
L. Chioncel
Abstract:
By merging single-site typical medium theory with density functional theory we introduce a self-consistent framework for electronic structure calculations of materials with substitutional disorder which takes into account Anderson localization. The scheme and details of the implementation are presented and applied to the hypothetical alloy Li$_{c}$Be$_{1-c}$, and the results are compared with thos…
▽ More
By merging single-site typical medium theory with density functional theory we introduce a self-consistent framework for electronic structure calculations of materials with substitutional disorder which takes into account Anderson localization. The scheme and details of the implementation are presented and applied to the hypothetical alloy Li$_{c}$Be$_{1-c}$, and the results are compared with those obtained with the coherent potential approximation. Furthermore we demonstrate that Anderson localization suppresses ferromagnetic order for a very low concentration of (i) carbon impurities substituting oxygen in MgO$_{1-c}$C$_{c}$, and (ii) manganese impurities substituting magnesium in Mg$_{1-c}$Mn$_c$O for the low-spin magnetic configuration.
△ Less
Submitted 30 January, 2020; v1 submitted 6 November, 2019;
originally announced November 2019.
-
Theory of transformation-mediated twinning
Authors:
Song Lu,
Xun Sun,
Xianghai An,
Wei Li,
Yujie Chen,
Hualei Zhang,
Levente Vitos
Abstract:
High-density and nanosized deformation twins in face-centered cubic (fcc)materials can effectively improve the combination of strength and ductility. However, the microscopic dislocation mechanisms enabling a high twinnability remain elusive. Twinning usually occurs via continuous nucleation and gliding of twinning partial dislocations on consecutive close-packed atomic planes. Here we unveil a co…
▽ More
High-density and nanosized deformation twins in face-centered cubic (fcc)materials can effectively improve the combination of strength and ductility. However, the microscopic dislocation mechanisms enabling a high twinnability remain elusive. Twinning usually occurs via continuous nucleation and gliding of twinning partial dislocations on consecutive close-packed atomic planes. Here we unveil a completely different twinning mechanism being active in metastable fcc materials. The transformation-mediated twinning (TMT) is featured by a preceding displacive transformation from the fcc phase to the hexagonal close-packed (hcp) one, followed by a second-step transformation from the hcp phase to the fcc twin. The nucleation of the intermediate hcp phase is driven by the thermodynamic instability and the negative stacking fault energy of the metastable fcc phase. The intermediate hcp structure is characterized by the easy slips of Shockley partial dislocations on the basal planes, which leads to both fcc and fcc twin platelets during deformation, creating more twin boundaries and further enhancing the prosperity of twins. The disclosed fundamental understanding of the complex dislocation mechanism of deformation twinning in metastable alloys paves the road to design novel materials with outstanding mechanical properties.
△ Less
Submitted 12 May, 2021; v1 submitted 25 October, 2019;
originally announced October 2019.
-
Understanding quality control of hard metals in industry -- A quantum mechanics approach
Authors:
Martina Lattemann,
Ruiwen Xie,
Raquel Lizárraga,
Levente Vitos,
Erik Holmström
Abstract:
For many decades, the magnetic saturation of, e.g. hard metals (HM) such as WC-Co-based cemented carbides, has been used as process and quality control in industry to ensure consistency of product properties. In an urge of replacing cobalt as a binder phase, a demand on understanding the magnetic response as a function of composition on the atomic scale is growing. In this paper, a theoretical des…
▽ More
For many decades, the magnetic saturation of, e.g. hard metals (HM) such as WC-Co-based cemented carbides, has been used as process and quality control in industry to ensure consistency of product properties. In an urge of replacing cobalt as a binder phase, a demand on understanding the magnetic response as a function of composition on the atomic scale is growing. In this paper, a theoretical description of the measured weight specific magnetic saturation of hard metals as a function of the tungsten weight fraction present in the cobalt binder phase, based on first-principle calculations, has been established for standard WC-Co. The predicted magnetic saturation agrees well with the experimental one. Furthermore, it is proposed that the theoretical description can be extended to alternative and more complex binder phases which allows to transfer the production control to those hard metals.
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Quantum mechanics basis of quality control in hard metals
Authors:
Ruiwen Xie,
Raquel Lizárragaa,
David Linder,
Ziyong Hou,
Valter Ström,
Martina Lattemann,
Erik Holmström,
Wei Li,
Levente Vitos
Abstract:
Non-destructive and reliable quality control methods are a key aspect to designing, develo** and manufacturing new materials for industrial applications and new technologies. The measurement of the magnetic saturation is one of such methods and it is conventionally employed in the cemented carbides industry. We present a general quantum mechanics based relation between the magnetic saturation an…
▽ More
Non-destructive and reliable quality control methods are a key aspect to designing, develo** and manufacturing new materials for industrial applications and new technologies. The measurement of the magnetic saturation is one of such methods and it is conventionally employed in the cemented carbides industry. We present a general quantum mechanics based relation between the magnetic saturation and the components of the binder phase of cemented carbides, which can be directly employed as a quality control. To illustrate our results, we calculate the magnetic saturation of a binder phase, 85Ni15Fe binary alloy, using ab-initio methods and compare the theoretical predictions to the magnetic saturation measurements. We also analyse interface and segregation effects on the magnetic saturation by studying the electronic structure of the binder phase. The excellent agreement between calculations and measurements demonstrates the applicability of our method to any binder phase. Since the magnetic saturation is employed to ensure the quality of cemented carbides, the present method allows us to explore new materials for alternative binder phases efficiently
△ Less
Submitted 5 December, 2018;
originally announced December 2018.
-
Correlated electronic structure with uncorrelated disorder
Authors:
A. Östlin,
L. Vitos,
L. Chioncel
Abstract:
We introduce a computational scheme for calculating the electronic structure of random alloys that includes electronic correlations within the framework of the combined density functional and dynamical mean-field theory. By making use of the particularly simple parameterization of the electron Green's function within the linearized muffin-tin orbitals method, we show that it is possible to greatly…
▽ More
We introduce a computational scheme for calculating the electronic structure of random alloys that includes electronic correlations within the framework of the combined density functional and dynamical mean-field theory. By making use of the particularly simple parameterization of the electron Green's function within the linearized muffin-tin orbitals method, we show that it is possible to greatly simplify the embedding of the self-energy. This in turn facilitates the implementation of the coherent potential approximation, which is used to model the substitutional disorder. The computational technique is tested on the Cu-Pd binary alloy system, and for disordered Mn-Ni interchange in the half-metallic NiMnSb.
△ Less
Submitted 5 December, 2018; v1 submitted 25 July, 2018;
originally announced July 2018.
-
Ab initio study of energetics and structures of heterophase interfaces: from coherent to semicoherent interfaces
Authors:
Song Lu,
John Ågren,
Levente Vitos
Abstract:
Density functional theory calculations have been performed to study the structures and energetics of coherent and semicoherent TiC/Fe interfaces. A systematic method for determining the interfacial energy for the semicoherent interface with misfit dislocation network has been developed. The obtained interfacial energies are used to calculate the aspect ratios for the disc-like precipitates and a q…
▽ More
Density functional theory calculations have been performed to study the structures and energetics of coherent and semicoherent TiC/Fe interfaces. A systematic method for determining the interfacial energy for the semicoherent interface with misfit dislocation network has been developed. The obtained interfacial energies are used to calculate the aspect ratios for the disc-like precipitates and a quantitative agreement with the experimental results is reached. Based on the obtained interfacial energies and atomic structure details, we propose models for describing the evolution of the interfacial energy with respect to the size of TiC precipitate for heterogeneous nucleation on an edge dislocation, shedding light on the thermodynamics of precipitate nucleation and growth. The present method can be easily applied to any heterophase interfaces between metals and oxides/carbides/nitrides.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Understanding the mechanical properties of reduced activation steels
Authors:
Xiaojie Li,
Xiaoqing Li,
Stephan Schönecker,
Ruihuan Li,
Jijun Zhao,
Levente Vitos
Abstract:
Reduced activation ferritic/martensitic (RAFM) steels are structural materials with potential application in Generation-IV fission and fusion reactors. We use density-functional theory to scrutinize the micro-mechanical properties of the main alloy phases of three RAFM steels based on the body-centered cubic FeCrWVMn solid solution. We assess the lattice parameters and elastic properties of ferrom…
▽ More
Reduced activation ferritic/martensitic (RAFM) steels are structural materials with potential application in Generation-IV fission and fusion reactors. We use density-functional theory to scrutinize the micro-mechanical properties of the main alloy phases of three RAFM steels based on the body-centered cubic FeCrWVMn solid solution. We assess the lattice parameters and elastic properties of ferromagnetic $α$-Fe and Fe$_{91}$Cr$_{9}$, which are the main building blocks of the RAFM steels, and present a detailed analysis of the calculated alloying effects of V, Cr, Mn, and W on the mechanical properties of Fe$_{91}$Cr$_{9}$. The composition dependence of the elastic parameters is decomposed into electronic and volumetric contributions and studied for alloying levels that cover the typical intervals in RAFM steels. A linear superposition of the individual solute effects on the properties of Fe$_{91}$Cr$_{9}$ is shown to provide an excellent approximation for the \emph{ab initio} values obtained for the RAFM steels. The intrinsic ductility is evaluated through Rice's phenomenological theory using the surface and unstable stacking fault energies, and the predictions are contrasted with those obtained by empirical criteria. Alloying with V or W is found to enhance the ductility, whereas additional Cr or Mn turns the RAFM base alloys more brittle.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
-
Analytic continuation-free Green's function approach to correlated electronic structure calculations
Authors:
A. Östlin,
L. Vitos,
L. Chioncel
Abstract:
We present a new charge self-consistent scheme combining Density Functional and Dynamical Mean Field Theory, which uses Green's function of multiple scattering-type. In this implementation the many-body effects are incorporated into the Kohn-Sham iterative scheme without the need for the numerically ill-posed analytic continuation of the Green's function and of the self-energy. This is achieved by…
▽ More
We present a new charge self-consistent scheme combining Density Functional and Dynamical Mean Field Theory, which uses Green's function of multiple scattering-type. In this implementation the many-body effects are incorporated into the Kohn-Sham iterative scheme without the need for the numerically ill-posed analytic continuation of the Green's function and of the self-energy. This is achieved by producing the Kohn-Sham Hamiltonian in the sub-space of correlated partial waves and allows to formulate the Green's function directly on the Matsubara axis. The spectral moments of the Matsubara Green's function enable us to put together the real space charge density, therefore the charge self-consistency can be achieved. Our results for the spectral functions (density of states) and equation of state curves for transition metal elements, Fe, Ni and FeAl compound agree very well with those of Hamiltonian based LDA+DMFT implementations. The current implementation improves on numerical accuracy, requires a minimal effort besides the multiple scattering formulation and can be generalized in several ways that are interesting for applications to real materials.
△ Less
Submitted 15 August, 2017;
originally announced August 2017.
-
The electronic structure of palladium in the presence of many-body effects
Authors:
A. Östlin,
W. H. Appelt,
I. Di Marco,
W. Sun,
M. Radonjic,
M. Sekania,
L. Vitos,
O. Tjernberg,
L. Chioncel
Abstract:
Including on-site electronic interactions described by the multi-orbital Hubbard model we study the correlation effects in the electronic structure of bulk palladium. We use a combined density functional and dynamical mean field theory, LDA+DMFT, based on the fluctuation exchange approximation. The agreement between the experimentally determined and the theoretical lattice constant and bulk modulu…
▽ More
Including on-site electronic interactions described by the multi-orbital Hubbard model we study the correlation effects in the electronic structure of bulk palladium. We use a combined density functional and dynamical mean field theory, LDA+DMFT, based on the fluctuation exchange approximation. The agreement between the experimentally determined and the theoretical lattice constant and bulk modulus is improved when correlation effects are included. It is found that correlations modify the Fermi surface around the neck at the $L$-point while the Fermi surface tube structures show little correlation effects. At the same time we discuss the possibility of satellite formation in the high energy binding region. Spectral functions obtained within the LDA+DMFT and $GW$ methods are compared to discuss non-local correlation effects. For relatively weak interaction strength of the local Coulomb and exchange parameters spectra from LDA+DMFT shows no major difference in comparison to $GW$.
△ Less
Submitted 2 March, 2016;
originally announced March 2016.
-
Stacking fault energy of face-centered cubic metals: thermodynamic and ab initio approaches
Authors:
Ruihuan Li,
Song Lu,
Dongyoo Kim,
Stephan Schönecker,
Jijun Zhao,
Se Kyun Kwon,
Levente Vitos
Abstract:
The formation energy of the interface between face-centered cubic (fcc) and hexagonal close packed (hcp) structures is a key parameter in determining the stacking fault energy (SFE) of fcc metals and alloys using thermodynamic calculations. Often the contribution of the planar fault energy to the SFE has the same order of magnitude as the bulk part, and thus the lack of a precise information about…
▽ More
The formation energy of the interface between face-centered cubic (fcc) and hexagonal close packed (hcp) structures is a key parameter in determining the stacking fault energy (SFE) of fcc metals and alloys using thermodynamic calculations. Often the contribution of the planar fault energy to the SFE has the same order of magnitude as the bulk part, and thus the lack of a precise information about it can become the limiting factor in thermodynamic predictions. Here, we differentiate between the actual interfacial energy for the coherent fcc(111)/hcp(0001) interface and the "pseudo-interfacial energy" that enters the thermodynamic expression for the SFE. Using first-principles calculations, we determine the coherent and pseudo- interfacial energies for six elemental metals (Al, Ni, Cu, Ag, Pt, and Au) and for three paramagnetic Fe-Cr-Ni alloys. Our results show that the two interfacial energies significantly differ from each other. We observe a strong chemistry dependence of both interfacial energies. The calculated pseudo-interfacial energies for the Fe-Cr-Ni steels agree well with the available literature data.
△ Less
Submitted 27 November, 2015;
originally announced November 2015.
-
First-Principles prediction of the deformation modes in austenitic Fe-Cr-Ni alloys
Authors:
Wei Li,
Song Lu,
Dongyoo Kim,
Se Kyun Kwon,
Kalevi Kokko,
Levente Vitos
Abstract:
First-principles alloy theory is used to establish the $γ$-surface of Fe-Cr-Ni alloys as function of chemical composition and temperature. The theoretical stacking fault energy (SFE) versus chemistry and temperature trends agree well with experiments. Combining our results with the recent plasticity theory based on the $γ$-surface, the stacking fault formation is predicted to be the leading deform…
▽ More
First-principles alloy theory is used to establish the $γ$-surface of Fe-Cr-Ni alloys as function of chemical composition and temperature. The theoretical stacking fault energy (SFE) versus chemistry and temperature trends agree well with experiments. Combining our results with the recent plasticity theory based on the $γ$-surface, the stacking fault formation is predicted to be the leading deformation mechanism for alloys with effective stacking fault energy below about 18 mJ m$^{-2}$. Alloys with SFE above this critical value show both twinning and full slip at room temperature and twinning remains a possible deformation mode even at elevated temperatures, in line with observations.
△ Less
Submitted 27 November, 2015;
originally announced November 2015.
-
Effect of interstitial-driven lattice expansion on the stacking fault energy in austenitic steels
Authors:
Song Lu,
Wei Li,
Se Kyun Kwon,
Kalevi Kokko,
Qing-Miao Hu,
Staffan Hertzman,
Levente Vitos
Abstract:
Interstitials (carbon and nitrogen) are crucial alloying elements for optimizing the mechanical performance of the twinning-induced plasticity (TWIP) steels in terms of the stacking fault energy (SFE). First-principles calculations have been performed to study the effect of interstitial-induced lattice expansion on the SFE. Comparing the predictions with the SFEs measured for alloys containing C a…
▽ More
Interstitials (carbon and nitrogen) are crucial alloying elements for optimizing the mechanical performance of the twinning-induced plasticity (TWIP) steels in terms of the stacking fault energy (SFE). First-principles calculations have been performed to study the effect of interstitial-induced lattice expansion on the SFE. Comparing the predictions with the SFEs measured for alloys containing C and N, our results suggest that the dominant effect of these interstitials on the SFE is due to the lattice expansion effect.
△ Less
Submitted 27 November, 2015;
originally announced November 2015.
-
Ab initio prediction of the mechanical properties of alloys: The case of Ni/Mn-doped ferromagnetic Fe
Authors:
Guisheng Wang,
Stephan Schönecker,
Staffan Hertzman,
Qing-Miao Hu,
Börje Johansson,
Se Kyun Kwon,
Levente Vitos
Abstract:
First-principles alloy theory, formulated within the exact muffin-tin orbitals method in combination with the coherent-potential approximation, is used to study the mechanical properties of ferromagnetic body-centered cubic (bcc) Fe$_{1-x}$M$_x$ alloys (M=Mn or Ni, $0\le x \le 0.1$). We consider several physical parameters accessible from \emph{ab initio} calculations and their combinations in var…
▽ More
First-principles alloy theory, formulated within the exact muffin-tin orbitals method in combination with the coherent-potential approximation, is used to study the mechanical properties of ferromagnetic body-centered cubic (bcc) Fe$_{1-x}$M$_x$ alloys (M=Mn or Ni, $0\le x \le 0.1$). We consider several physical parameters accessible from \emph{ab initio} calculations and their combinations in various phenomenological models to compare the effect of Mn and Ni on the properties of Fe. Alloying is found to slightly alter the lattice parameters and produce noticeable influence on elastic moduli. Both Mn and Ni decrease the surface energy and the unstable stacking fault energy associated with the $\{110\}$ surface facet and the $\{110\}\langle111\rangle$ slip system, respectively. Nickel is found to produce larger effect on the planar fault energies than Mn. The semi-empirical ductility criteria by Rice and Pugh consistently predict that Ni enhances the ductility of Fe but give contradictory results in the case of Mn do**. The origin of the discrepancy between the two criteria is discussed and an alternative measure of the ductile-brittle behavior based on the theoretical cleavage strength and single-crystal shear modulus $G\{110\}\langle111\rangle$ is proposed.
△ Less
Submitted 20 May, 2015;
originally announced May 2015.
-
Segregation, precipitation, and α-α' phase separation in Fe-Cr alloys: a multi-scale modelling approach
Authors:
A. Kuronen,
M. H. Heinonen,
S. Granroth,
R. E. Perälä,
T. Kilpi,
P. Laukkanen,
J. Lång,
J. Dahl,
M. P. J. Punkkinen,
K. Kokko,
M. Ropo,
B. Johansson,
L. Vitos
Abstract:
Segregation, precipitation, and phase separation in Fe-Cr systems is investigated. Monte Carlo simulations using semiempirical interatomic potential, first-principles total energy calculations, and experimental spectroscopy are used. In order to obtain a general picture of the relation of the atomic interactions and properties of Fe-Cr alloys in bulk, surface, and interface regions several complem…
▽ More
Segregation, precipitation, and phase separation in Fe-Cr systems is investigated. Monte Carlo simulations using semiempirical interatomic potential, first-principles total energy calculations, and experimental spectroscopy are used. In order to obtain a general picture of the relation of the atomic interactions and properties of Fe-Cr alloys in bulk, surface, and interface regions several complementary methods has to be used. Using Exact Muffin-Tin Orbitals method the effective chemical potential as a function of Cr content (0-15 at.% Cr) is calculated for a surface, second atomic layer and bulk. At ~10 at.% Cr in the alloy the reversal of the driving force of a Cr atom to occupy either bulk or surface sites is obtained. The Cr containing surfaces are expected when the Cr content exceeds ~10 at.%. The second atomic layer forms about 0.3 eV barrier for the migration of Cr atoms between bulk and surface atomic layer. To get information on Fe-Cr in larger scales we use semiempirical methods. Using combined Monte Carlo molecular dynamics simulations, based on semiempirical potential, the precipitation of Cr into isolated pockets in bulk Fe-Cr and the upper limit of the solubility of Cr into Fe layers in Fe/Cr layer system is studied. The theoretical predictions are tested using spectroscopic measurements. Hard X-ray photoelectron spectroscopy and Auger electron spectroscopy investigations were carried out to explore Cr segregation and precipitation in Fe/Cr double layer and Fe_0.95Cr_0.05 and Fe_0.85Cr_0.15 alloys. Initial oxidation of Fe-Cr was investigated experimentally at 10^-8 Torr pressure of the spectrometers showing intense Cr_2O_3 signal. Cr segregation and the formation of Cr rich precipitates were traced by analysing the experimental spectral intensities with respect to annealing time, Cr content, and kinetic energy of the exited electron.
△ Less
Submitted 28 April, 2015;
originally announced April 2015.
-
Transmission through correlated Cu$_n$CoCu$_n$ heterostructures
Authors:
L. Chioncel,
C. Morari,
A. Östlin,
W. H. Appelt,
A. Droghetti,
M. M. Radonjić,
I. Rungger,
L. Vitos,
U. Eckern,
A. V. Postnikov
Abstract:
The effects of local electronic interactions and finite temperatures upon the transmission across the Cu$_4$CoCu$_4$ metallic heterostructure are studied in a combined density functional and dynamical mean field theory. It is shown that, as the electronic correlations are taken into account via a local but dynamic self-energy, the total transmission at the Fermi level gets reduced (predominantly i…
▽ More
The effects of local electronic interactions and finite temperatures upon the transmission across the Cu$_4$CoCu$_4$ metallic heterostructure are studied in a combined density functional and dynamical mean field theory. It is shown that, as the electronic correlations are taken into account via a local but dynamic self-energy, the total transmission at the Fermi level gets reduced (predominantly in the minority spin channel), whereby the spin polarization of the transmission increases. The latter is due to a more significant $d$-electrons contribution, as compared to the non-correlated case in which the transport is dominated by $s$ and $p$ electrons.
△ Less
Submitted 24 April, 2015;
originally announced April 2015.
-
Metastable cubic and tetragonal phases of transition metals predicted by density-functional theory
Authors:
Stephan Schönecker,
Xiaoqing Li,
Klaus Koepernik,
Börje Johansson,
Levente Vitos,
Manuel Richter
Abstract:
By means of density-functional calculations, we systematically investigated 24 transition metals for possible metastable phases in body-centered tetragonal structure (bct), including face-centered cubic (fcc) and body-centered cubic (bcc) geometries. A total of 36 structures not coinciding with equilibrium phases were found to minimize the total energy for the bct degrees of freedom. Among these,…
▽ More
By means of density-functional calculations, we systematically investigated 24 transition metals for possible metastable phases in body-centered tetragonal structure (bct), including face-centered cubic (fcc) and body-centered cubic (bcc) geometries. A total of 36 structures not coinciding with equilibrium phases were found to minimize the total energy for the bct degrees of freedom. Among these, the fcc structures of Sc, Ti, Co, Y, Zr, Tc, Ru, Hf, Re, and Os, and bct Zr with $c/a=0.82$ were found to be metastable according to their computed phonon spectra. Eight of these predicted phases are not known from the respective pressure-temperature phase diagrams. Possible ways to stabilize the predicted metastable phases are illustrated.
△ Less
Submitted 19 March, 2015;
originally announced March 2015.
-
Tensile strain-induced softening of iron at high temperature
Authors:
Xiaoqing Li,
Stephan Schönecker,
Eszter Simon,
Lars Bergqvist,
Hualei Zhang,
László Szunyogh,
Jijun Zhao,
Börje Johansson,
Levente Vitos
Abstract:
In weakly ferromagnetic materials, already small changes in the atomic configuration triggered by temperature or chemistry can alter the magnetic interactions responsible for the non-random atomic-spin orientation. Different magnetic states, in turn, can give rise to substantially different macroscopic properties. A classical example is iron, which exhibits a great variety of properties as one gra…
▽ More
In weakly ferromagnetic materials, already small changes in the atomic configuration triggered by temperature or chemistry can alter the magnetic interactions responsible for the non-random atomic-spin orientation. Different magnetic states, in turn, can give rise to substantially different macroscopic properties. A classical example is iron, which exhibits a great variety of properties as one gradually removes the magnetic long-range order by raising the temperature towards and beyond its Curie point of $T_{\text{C}}^{0}=1043$\,K. Using first-principles theory, here we demonstrate that uniaxial tensile strain can also destabilize the magnetic order in iron and eventually lead to a ferromagnetic to paramagnetic transition at temperatures far below $T_{\text{C}}^{0}$. In consequence, the intrinsic strength of the ideal single-crystal body-centered cubic iron dramatically weakens above a critical temperature of $\sim 500$\,K. The discovered strain-induced magneto-mechanical softening provides a plausible atomic-level mechanism behind the observed drop of the measured strength of Fe whiskers around $300-500$\,K. Alloying additions which have the capability to partially restore the magnetic order in the strained Fe lattice, push the critical temperature for the strength-softening scenario towards the magnetic transition temperature of the undeformed lattice. This can result in a surprisingly large alloying-driven strengthening effect at high temperature as illustrated here in the case of Fe-Co alloy.
△ Less
Submitted 25 February, 2016; v1 submitted 23 January, 2015;
originally announced January 2015.
-
Anomalous ideal tensile strength of ferromagnetic Fe and Fe-rich alloys
Authors:
Xiaoqing Li,
Stephan Schönecker,
Jijun Zhao,
Börje Johansson,
Levente Vitos
Abstract:
Within the same failure mode, iron has the lowest ideal tensile strength among the transition metals crystallizing in the body-centered cubic structure. Here, we demonstrate that this anomalously low strength of Fe originates partly from magnetism and is reflected in unexpected alloying effects in dilute Fe(\emph{M}) (\emph{M} = Al, V, Cr, Mn, Co, Ni) binaries. We employ the structural energy diff…
▽ More
Within the same failure mode, iron has the lowest ideal tensile strength among the transition metals crystallizing in the body-centered cubic structure. Here, we demonstrate that this anomalously low strength of Fe originates partly from magnetism and is reflected in unexpected alloying effects in dilute Fe(\emph{M}) (\emph{M} = Al, V, Cr, Mn, Co, Ni) binaries. We employ the structural energy difference and the magnetic pressure to disentangle the magnetic effect on the ideal tensile strength from the chemical effect. We find that the investigated solutes strongly alter the magnetic response of the Fe host from the weak towards a stronger ferromagnetic behavior, which is explained based on single-particle band energies.
△ Less
Submitted 1 July, 2014;
originally announced July 2014.
-
Flexibility of the quasi-non-uniform exchange-correlation approximation
Authors:
H. Levämäki,
L. Vitos,
M. P. J. Punkkinen,
K. Kokko
Abstract:
In our previous study [Phys. Rev. B 86, 201104 (2012)] we introduced the so called quasi-non-uniform gradient-level exchange-correlation approximation (QNA) and demonstrated it's strength in producing highly accurate equilibrium volumes for metals and their alloys within the density-functional theory. In this paper we extend the scheme to include the accuracy of bulk modulus as an additional figur…
▽ More
In our previous study [Phys. Rev. B 86, 201104 (2012)] we introduced the so called quasi-non-uniform gradient-level exchange-correlation approximation (QNA) and demonstrated it's strength in producing highly accurate equilibrium volumes for metals and their alloys within the density-functional theory. In this paper we extend the scheme to include the accuracy of bulk modulus as an additional figure of merit and show that this scheme is flexible enough as to allow the computation of accurate equilibrium volumes and bulk moduli at the same time. The power and feasibility of this scheme is demonstrated on NiAl and FeV binary alloys.
△ Less
Submitted 15 February, 2014;
originally announced February 2014.
-
Alloying effect on the ideal tensile strength of ferromagnetic and paramagnetic bcc iron
Authors:
Xiaoqing Li,
Stephan Schönecker,
Jijun Zhao,
Börje Johansson,
Levente Vitos
Abstract:
Using \emph{ab initio} alloy theory formulated within the exact muffin-tin orbitals theory in combination with the coherent potential approximation, we investigate the ideal tensile strength (ITS) in the $[001]$ direction of bcc ferro-/ferrimagnetic (FFM) and paramagnetic (PM) Fe$_{1-x}M_{x}$ ($M=$ Al, V, Cr, Mn, Co, or Ni) random alloys. The ITS of ferromagnetic (FM) Fe is calculated to be…
▽ More
Using \emph{ab initio} alloy theory formulated within the exact muffin-tin orbitals theory in combination with the coherent potential approximation, we investigate the ideal tensile strength (ITS) in the $[001]$ direction of bcc ferro-/ferrimagnetic (FFM) and paramagnetic (PM) Fe$_{1-x}M_{x}$ ($M=$ Al, V, Cr, Mn, Co, or Ni) random alloys. The ITS of ferromagnetic (FM) Fe is calculated to be $12.6$\,GPa, in agreement with available data, while the PM phase turns out to posses a significantly lower value of $0.7\,$GPa. Alloyed to the FM matrix, we predict that V, Cr, and Co increase the ITS of Fe, while Al and Ni decrease it. Manganese yields a weak non-monotonic alloying behavior. In comparison to FM Fe, the alloying effect of Al and Co to PM Fe is reversed and the relative magnitude of the ITS can be altered more strongly for any of the solutes. All considered binaries are intrinsically brittle and fail by cleavage of the $(001)$ planes under uniaxial tensile loading in both magnetic phases. We show that the previously established ITS model based on structural energy differences proves successful in the PM Fe-alloys but is of limited use in the case of the FFM Fe-based alloys. The different performance is attributed to the specific interplay between magnetism and volume change in response to uniaxial tension. We establish a strong correlation between the compositional effect on the ITS and the one on the shear elastic constant $C'$ for the PM alloys and briefly discuss the relation between hardenability and the ITS.
△ Less
Submitted 22 February, 2016; v1 submitted 18 April, 2013;
originally announced April 2013.
-
Surface parameters of ferritic iron-rich Fe-Cr alloy
Authors:
Stephan Schönecker,
Se Kyun Kwon,
Börje Johansson,
Levente Vitos
Abstract:
Using first-principles density functional theory in the implementation of the exact muffin-tin orbitals method and the coherent potential approximation, we studied the surface energy and the surface stress of the thermodynamically most stable surface facet (100) of the homogeneous disordered body-centred cubic iron-chromium system in the concentration interval up to 20 at.% Cr. For the low-index s…
▽ More
Using first-principles density functional theory in the implementation of the exact muffin-tin orbitals method and the coherent potential approximation, we studied the surface energy and the surface stress of the thermodynamically most stable surface facet (100) of the homogeneous disordered body-centred cubic iron-chromium system in the concentration interval up to 20 at.% Cr. For the low-index surface facets of Fe and Cr, the surface energy of Cr is slightly larger than the one of Fe, while the surface stress of Cr is considerably smaller than the one of Fe. We find that Cr addition to Fe generally increases the surface energy of the Fe-Cr alloy, however, an increase of the bulk amount of Cr also increases the surface stress. As a result of this unexpected trend, the (100) surface of Fe-Cr becomes more stable against reconstruction with increasing Cr concentration. We show that the observed trends are of magnetic origin. In addition to the homogeneous alloy case, we also investigated the impact of surface segregation on both surface parameters.
△ Less
Submitted 20 June, 2013; v1 submitted 4 April, 2013;
originally announced April 2013.
-
Magnetoelastic effects in doped Fe2P
Authors:
Z. Gercsi,
E. K. Delczeg-Czirjak,
L. Vitos,
A. S. Wills,
A. Daoud-Aladine,
K. G. Sandeman
Abstract:
We use combine high resolution neutron diffraction (HRPD) with density functional theory (DFT) to investigate the exchange striction at the Curie temperature (TC) of Fe2P and to examine the effect of boron and carbon do** on the P site. We find a significant contraction of the basal plane on heating through TC with a simultaneous increase of the c-axis that results in a small overall volume chan…
▽ More
We use combine high resolution neutron diffraction (HRPD) with density functional theory (DFT) to investigate the exchange striction at the Curie temperature (TC) of Fe2P and to examine the effect of boron and carbon do** on the P site. We find a significant contraction of the basal plane on heating through TC with a simultaneous increase of the c-axis that results in a small overall volume change of ~0.01%. At the magnetic transition the FeI-FeI distance drops significantly and becomes shorter than FeI-FeII . The shortest metal-metalloid (FeI-PI) distance also decreases sharply. Our DFT model reveals the importance of the latter as this structural change causes a redistribution of the FeI moment along the c-axis (Fe-P chain). We are able to understand the site preference of the dopants, the effect of which can be linked to the increased moment on the FeI-site, brought about by strong magneto-elasticity and changes in the electronic band structure.
△ Less
Submitted 26 June, 2013; v1 submitted 19 March, 2013;
originally announced March 2013.
-
Ideal strength of random alloys from first-principles theory
Authors:
Xiaoqing Li,
Stephan Schönecker,
Jijun Zhao,
Börje Johansson,
Levente Vitos
Abstract:
The all-electron exact muffin-tin orbitals method in combination with the coherent-potential appproximation has been employed to investigate the ideal tensile strengths of elemental V, Mo solids and V- and Mo-based random solid solutions. The present ideal tensile strengths, calculated assuming isotropic Poisson contraction, are 16.1, 26.7 and 37.6 GPa for bcc V in the [001], [111] and [110] direc…
▽ More
The all-electron exact muffin-tin orbitals method in combination with the coherent-potential appproximation has been employed to investigate the ideal tensile strengths of elemental V, Mo solids and V- and Mo-based random solid solutions. The present ideal tensile strengths, calculated assuming isotropic Poisson contraction, are 16.1, 26.7 and 37.6 GPa for bcc V in the [001], [111] and [110] directions, respectively, and 26.7 GPa for bcc Mo in the [001] direction, which are all in good agreement with the available theoretical data. When a few percent Tc is introduced in Mo, it is found that the ideal strength decreases in the [001] direction. For the V-based alloys, Cr increases and Ti decreases the ideal tensile strength in all principal directions. Adding the same concentration of Cr and Ti to V leads to ternary alloys with similar ideal strength values as that of pure V. The alloying effects on the ideal strength is explained using the electronic band structure.
△ Less
Submitted 5 July, 2013; v1 submitted 13 February, 2013;
originally announced February 2013.
-
One particle spectral function and analytic continuation for many-body implementation in the EMTO method
Authors:
A. Östlin,
L. Chioncel,
L. Vitos
Abstract:
We investigate one of the most common analytic continuation techniques in condensed matter physics, namely the Padé approximant. Aspects concerning its implementation in the exact muffin-tin orbitals (EMTO) method are scrutinized with special regard towards making it stable and free of artificial defects. The electronic structure calculations are performed for solid hydrogen, and the performance o…
▽ More
We investigate one of the most common analytic continuation techniques in condensed matter physics, namely the Padé approximant. Aspects concerning its implementation in the exact muffin-tin orbitals (EMTO) method are scrutinized with special regard towards making it stable and free of artificial defects. The electronic structure calculations are performed for solid hydrogen, and the performance of the analytical continuation is assessed by monitoring the density of states constructed directly and via the Padé approximation. We discuss the difference between the \textbf{k}-integrated and \textbf{k}-resolved analytical continuations, as well as describing the use of random numbers and pole residues to analyze the approximant. It is found that the analytic properties of the approximant can be controlled by appropriate modifications, making it a robust and reliable tool for electronic structure calculations. At the end, we propose a route to perform analytical continuation for the EMTO + dynamical mean field theory (DMFT) method.
△ Less
Submitted 8 December, 2012; v1 submitted 24 September, 2012;
originally announced September 2012.
-
Quasi-non-local gradient-level exchange-correlation approximation for metals and alloys
Authors:
H. Levämäki,
L. Vitos,
M. P. J. Punkkinen,
K. Kokko
Abstract:
The flexibility of common generalized gradient approximation for the exchange-correlation energy is investigated by monitoring the equilibrium volume of transition metals. It is shown that no universal gradient-level approximation yielding consistent errors for all metals exists. Based on an element-specific optimization, the concept of quasi-non-local gradient-level approximation is introduced. T…
▽ More
The flexibility of common generalized gradient approximation for the exchange-correlation energy is investigated by monitoring the equilibrium volume of transition metals. It is shown that no universal gradient-level approximation yielding consistent errors for all metals exists. Based on an element-specific optimization, the concept of quasi-non-local gradient-level approximation is introduced. The strength of the scheme is demonstrated on several transition metal alloys.
△ Less
Submitted 25 July, 2012;
originally announced July 2012.
-
Magnetic origin of chemical balance in alloyed Fe-Cr stainless steels: first-principles and Ising model study
Authors:
E. Airiskallio,
E. Nurmi,
I. J. Väyrynen,
K. Kokko,
M. Ropo,
M. P. J. Punkkinen,
B. Johansson,
L. Vitos
Abstract:
Iron-chromium forms the basis of most of the stainless steel grades in the markets. Recently new insights into the physical and chemical properties of Fe-Cr based alloys have been obtained. Some of the new results are quite unexpected and call for further investigations. The present study addresses the magnetic contribution in the atomic driving forces behind the chemical composition in Fe-Cr allo…
▽ More
Iron-chromium forms the basis of most of the stainless steel grades in the markets. Recently new insights into the physical and chemical properties of Fe-Cr based alloys have been obtained. Some of the new results are quite unexpected and call for further investigations. The present study addresses the magnetic contribution in the atomic driving forces behind the chemical composition in Fe-Cr alloyed with Al, Ti, V, Mn, Co, Ni, and Mo. Using the ab initio exact muffin-tin orbitals method and an Ising-type spin model, it is found that the magnetic moment of the solute atom combined with the induced changes in the magnetic moments of the host atoms form the main framework in determining the mixing energy and chemical potentials of low-Cr Fe-Cr based alloys. The results obtained in the present work are related to tuning of the microstructure and corrosion protection of low-Cr steels.
△ Less
Submitted 20 January, 2012;
originally announced January 2012.
-
Phase transformation in steel alloys for magnetocaloric applications; Fe$_{85-x}$Cr$_{15}$Ni$_{x}$ and Fe$_{85-x}$Cr$_{15}$Mn$_{x}$ as prototypes
Authors:
P. Souvatzis,
E. K. Delczeg-Czirjak,
L. Vitos,
O. Eriksson
Abstract:
We here show by first principles theory that it is possible to achieve a structural and magnetic phase transition in common steel alloys like Fe$_{85}$Cr$_{15}$, by alloying with Ni or Mn. The predicted phase transition is from the ferromagnetic body centered cubic (bcc) phase to the paramagnetic face centered cubic (fcc) phase. The relatively high average magnetic moment of $\sim1.4μ_{B}$/atom pr…
▽ More
We here show by first principles theory that it is possible to achieve a structural and magnetic phase transition in common steel alloys like Fe$_{85}$Cr$_{15}$, by alloying with Ni or Mn. The predicted phase transition is from the ferromagnetic body centered cubic (bcc) phase to the paramagnetic face centered cubic (fcc) phase. The relatively high average magnetic moment of $\sim1.4μ_{B}$/atom predicted at the transition suggests that stainless steel potentially can present a magnetocaloric effect strong enough to make these alloys good candidates for refrigeration applications operating at and around room temperature.
△ Less
Submitted 19 January, 2012;
originally announced January 2012.
-
Initial oxidation of Fe-Al and Fe-Cr-Al alloys: Cr as an alumina booster
Authors:
Markku Heinonen,
Kalevi Kokko,
Marko Punkkinen,
Eero Nurmi,
Janos Kollár,
Levente Vitos
Abstract:
The boosting effect of Cr on the growth of the protective alumina scale on Fe-Al alloys is investigated by x-ray photoelectron spectroscopy. Using low oxygen pressure the surface chemistry of the alloys is monitored starting from the first moments of oxidation. Chromium effect on the Fe-Al surface-bulk exchange is clearly detected by analyzing the measured surface concentrations within the atomic…
▽ More
The boosting effect of Cr on the growth of the protective alumina scale on Fe-Al alloys is investigated by x-ray photoelectron spectroscopy. Using low oxygen pressure the surface chemistry of the alloys is monitored starting from the first moments of oxidation. Chromium effect on the Fe-Al surface-bulk exchange is clearly detected by analyzing the measured surface concentrations within the atomic concentration models. Previous ab initio calculations agree well with the present experiments.
△ Less
Submitted 4 February, 2011;
originally announced February 2011.
-
Absence of halfmetallicity in defect-free Cr, Mn-delta-doped Digital Magnetic Heterostructures
Authors:
F. Beiuşeanu,
C. Horea,
E. -V. Macocian,
T. Jurcuţ,
L. Vitos,
L. Chioncel
Abstract:
We present results of a combined density functional and many-body calculations for the electronic and magnetic properties of the defect-free digital ferromagnetic heterostructures obtained by do** GaAs with Cr and Mn. While local density approximation/(+U) predicts half-metallicity in these defect-free delta-doped heterostructures, we demonstrate that local many-body correlations captured by Dyn…
▽ More
We present results of a combined density functional and many-body calculations for the electronic and magnetic properties of the defect-free digital ferromagnetic heterostructures obtained by do** GaAs with Cr and Mn. While local density approximation/(+U) predicts half-metallicity in these defect-free delta-doped heterostructures, we demonstrate that local many-body correlations captured by Dynamical Mean Field Theory induce within the minority spin channel non-quasiparticle states just above $E_F$. As a consequence of the existence of these many-body states the half-metallic gap is closed and the carriers spin polarization is significantly reduced. Below the Fermi level the minority spin highest valence states are found to localize more on the GaAs layers being independent of the type of electronic correlations considered. Thus, our results confirm the confinement of carriers in these delta-doped heterostructures, having a spin-polarization that follow a different temperature dependence than magnetization. We suggest that polarized hot-electron photoluminescence experiments might bring evidence for the existence of many-body states within the minority spin channel and their finite temperature behavior.
△ Less
Submitted 3 February, 2011;
originally announced February 2011.
-
Strongly enhanced magnetic moments in ferromagnetic FeMnP$_{0.50}$Si$_{0.50}$
Authors:
Matthias Hudl,
Lennart Häggström,
Erna-Krisztina Delczeg-Czirjak,
Viktor Höglin,
Martin Sahlberg,
Levente Vitos,
Olle Eriksson,
Per Nordblad,
Yvonne Andersson
Abstract:
The compound FeMnP$_{0.50}$Si$_{0.50}$ has been studied by magnetic measurements, Mössbauer spectroscopy and electronic structure and total energy calculations. An unexpected high magnetic hyperfine field for Fe atoms located at the tetrahedral Me(1) site in the Fe$_2$P structure is found. The saturation moment derived from magnetic measurements corresponds to 4.4 $μ_B$/f.u. at low temperatures, a…
▽ More
The compound FeMnP$_{0.50}$Si$_{0.50}$ has been studied by magnetic measurements, Mössbauer spectroscopy and electronic structure and total energy calculations. An unexpected high magnetic hyperfine field for Fe atoms located at the tetrahedral Me(1) site in the Fe$_2$P structure is found. The saturation moment derived from magnetic measurements corresponds to 4.4 $μ_B$/f.u. at low temperatures, a value substantially higher than previously reported, but in accord with the results from our electron structure calculations. This high saturation moment, a first order nature of the ferromagnetic transition and a tunable transition temperature make the Fe$_{2-x}$Mn$_{x}$P$_{1-y}$Si$y$ system promising for magnetocaloric applications.
△ Less
Submitted 3 February, 2011;
originally announced February 2011.
-
A new material for hydrogen storage, ScAl0.8Mg0.2
Authors:
Martin Sahlberg,
Premysl Beran,
Thomas Kollin Nielsen,
Yngve Cerenius,
Krisztina Kadas,
Levente Vitos,
Olle Eriksson,
Torben R Jensen,
Yvonne Andersson
Abstract:
A novel aluminium rich alloy for hydrogen storage has been discovered, ScAl0.8Mg0.2, which has superior properties regarding hydrogen storage capacity, kinetics and stability towards air oxidation in comparison to hydrogen absorption in state-of-the-art intermetallic compounds. Detailed analysis of the hydrogen absorption in ScAl0.8Mg0.2 has been performed using in situ synchrotron radiation pow…
▽ More
A novel aluminium rich alloy for hydrogen storage has been discovered, ScAl0.8Mg0.2, which has superior properties regarding hydrogen storage capacity, kinetics and stability towards air oxidation in comparison to hydrogen absorption in state-of-the-art intermetallic compounds. Detailed analysis of the hydrogen absorption in ScAl0.8Mg0.2 has been performed using in situ synchrotron radiation powder X-ray diffraction, neutron powder diffraction and quantum mechanical calculations. The results from calculations and experiments are in good agreement with each other.
△ Less
Submitted 28 July, 2009; v1 submitted 5 May, 2009;
originally announced May 2009.
-
Order--disorder induced magnetic structures of FeMnP$_{0.75}$Si$_{0.25}$
Authors:
Matthias Hudl,
Per Nordblad,
Torbjörn Björkman,
Olle Eriksson,
Lennart Häggström,
Levente Vitos,
Martin Sahlberg,
Yvonne Andersson
Abstract:
We report on the synthesis and structural characterization of the magnetocaloric FeMnP$_{0.75}$Si$_{0.25}$ compound. Two types of samples (as quenched and annealed) were synthesized and characterized structurally and magnetically. We have found that minute changes in the degree of crystallographic order causes a large change in the magnetic properties. The annealed sample, with higher degree of…
▽ More
We report on the synthesis and structural characterization of the magnetocaloric FeMnP$_{0.75}$Si$_{0.25}$ compound. Two types of samples (as quenched and annealed) were synthesized and characterized structurally and magnetically. We have found that minute changes in the degree of crystallographic order causes a large change in the magnetic properties. The annealed sample, with higher degree of order is antiferromagnetic with a zero net moment. The as-quenched sample has a net moment of 1.26 $μ_B$/f.u. and ferrimagnetic-like behavior. Theoretical calculations give rather large values for the Fe and Mn magnetic moments, both when occupied on the tetrahedral and pyramidal lattice site. The largest being the Mn moment for the pyramidal site reaches values as high as 2.8 $μ_B$/atom.
△ Less
Submitted 15 April, 2009;
originally announced April 2009.
-
Proving the Perdew-Burke-Ernzerhof density functional designed for metallic bulk and surface systems
Authors:
M. Ropo,
K. Kokko,
L. Vitos
Abstract:
We test the accuracy of the revised Perdew-Burke-Ernzerhof exchange-correlation density functional (PBEsol) for metallic bulk and surface systems. It is shown that, on average, PBEsol yields equilibrium volumes and bulk moduli in close agreement with the former generalized gradient approximation (PBE) and two gradient level functionals derived from model system approach (LAG and AM05). On the ot…
▽ More
We test the accuracy of the revised Perdew-Burke-Ernzerhof exchange-correlation density functional (PBEsol) for metallic bulk and surface systems. It is shown that, on average, PBEsol yields equilibrium volumes and bulk moduli in close agreement with the former generalized gradient approximation (PBE) and two gradient level functionals derived from model system approach (LAG and AM05). On the other hand, for close-packed metal surfaces, PBEsol has the same performance as AM05, giving significantly larger surface energies than PBE and LAG.
△ Less
Submitted 13 March, 2008; v1 submitted 23 November, 2007;
originally announced November 2007.
-
Ab initio electronic structure calculation of correlated systems: EMTO-DMFT approach
Authors:
L. Chioncel,
L. Vitos,
I. A. Abrikosov,
J. Kollar,
M. I. Katsnelson,
A. I. Lichtenstein
Abstract:
We propose a self-consistent method for electronic structure calculations of correlated systems, which combines the local spin-density approximation (LSDA) and the dynamical mean field theory (DMFT). The LSDA part is based on the exact muffin-tin orbital approach, meanwhile the DMFT uses a perturbation scheme that includes the T matrix with fluctuation exchange approximation. The current LSDA+DM…
▽ More
We propose a self-consistent method for electronic structure calculations of correlated systems, which combines the local spin-density approximation (LSDA) and the dynamical mean field theory (DMFT). The LSDA part is based on the exact muffin-tin orbital approach, meanwhile the DMFT uses a perturbation scheme that includes the T matrix with fluctuation exchange approximation. The current LSDA+DMFT implementation fulfills both self-energy and charge self-consistency requirements. We present results on the electronic structure calculations for bulk 3d transition metals (Cr, Fe, and Ni) and for Fe/Cr magnetic multilayers. The latter demonstrates the importance of the correlation effects for the properties of magnetic heterostructures.
△ Less
Submitted 12 September, 2003;
originally announced September 2003.
-
Application of the Exact Muffin-Tin Orbitals Theory: the Spherical Cell Approximation
Authors:
L. Vitos,
H. L. Skriver,
B. Johansson,
J. Kollár
Abstract:
We present a self-consistent electronic structure calculation method based on the {\it Exact Muffin-Tin Orbitals} (EMTO) Theory developed by O. K. Andersen, O. Jepsen and G. Krier (in {\it Lectures on Methods of Electronic Structure Calculations}, Ed. by V. Kumar, O.K. Andersen, A. Mookerjee, Word Scientific, 1994 pp. 63-124) and O. K. Andersen, C. Arcangeli, R. W. Tank, T. Saha-Dasgupta, G. Kri…
▽ More
We present a self-consistent electronic structure calculation method based on the {\it Exact Muffin-Tin Orbitals} (EMTO) Theory developed by O. K. Andersen, O. Jepsen and G. Krier (in {\it Lectures on Methods of Electronic Structure Calculations}, Ed. by V. Kumar, O.K. Andersen, A. Mookerjee, Word Scientific, 1994 pp. 63-124) and O. K. Andersen, C. Arcangeli, R. W. Tank, T. Saha-Dasgupta, G. Krier, O. Jepsen, and I. Dasgupta, (in {\it Mat. Res. Soc. Symp. Proc.} {\bf 491}, 1998 pp. 3-34). The EMTO Theory can be considered as an {\it improved screened} KKR (Korringa-Kohn-Rostoker) method which is able to treat large overlap** potential spheres. Within the present implementation of the EMTO Theory the one electron equations are solved exactly using the Green's function formalism, and the Poisson's equation is solved within the {\it Spherical Cell Approximation} (SCA). To demonstrate the accuracy of the SCA-EMTO method test calculations have been carried out.
△ Less
Submitted 19 May, 2000;
originally announced May 2000.
-
The exchange energy in the local Airy gas approximation
Authors:
L. Vitos,
B. Johansson,
J. Kollár,
H. L. Skriver
Abstract:
The Airy gas model of the edge electron gas is used to construct an exchange-energy functional which is an alternative to those obtained in the local density and generalized gradient approximations. Test calculations for rare gas atoms, molecules, solids and surfaces show that the Airy gas functional performs better than the local density approximation in all cases and better than the generalize…
▽ More
The Airy gas model of the edge electron gas is used to construct an exchange-energy functional which is an alternative to those obtained in the local density and generalized gradient approximations. Test calculations for rare gas atoms, molecules, solids and surfaces show that the Airy gas functional performs better than the local density approximation in all cases and better than the generalized gradient approximation for solids and surfaces.
△ Less
Submitted 19 May, 2000; v1 submitted 18 May, 2000;
originally announced May 2000.