-
Quantification of spin-charge interconversion in highly resistive sputtered Bi$_x$Se$_{1-x}$ with non-local spin valves
Authors:
Isabel C. Arango,
Won Young Choi,
Van Tuong Pham,
Inge Groen,
Diogo C. Vaz,
Punyashloka Debashis,
Hai Li,
Mahendra DC,
Kaan Oguz,
Andrey Chuvilin,
Luis E. Hueso,
Ian A. Young,
Fèlix Casanova
Abstract:
The development of spin-orbitronic devices, such as magneto-electric spin-orbit logic devices, calls for materials with a high resistivity and a high spin-charge interconversion efficiency. One of the most promising candidates in this regard is sputtered Bi$_x$Se$_{1-x}$. Although there are several techniques to quantify spin-charge interconversion, to date reported values for sputtered Bi$_x$Se…
▽ More
The development of spin-orbitronic devices, such as magneto-electric spin-orbit logic devices, calls for materials with a high resistivity and a high spin-charge interconversion efficiency. One of the most promising candidates in this regard is sputtered Bi$_x$Se$_{1-x}$. Although there are several techniques to quantify spin-charge interconversion, to date reported values for sputtered Bi$_x$Se$_{1-x}$ have often been overestimated due to spurious effects related to local currents combined with a lack of understanding of the effect of the interfaces and the use of approximations for unknown parameters, such as the spin diffusion length. In the present study, non-local spin valves are used to inject pure spin currents into Bi$_x$Se$_{1-x}$, allowing us to directly obtain its spin diffusion length as well as its spin Hall angle, from 10 K up to 300 K. These values, which are more accurate than those previously reported in sputtered Bi$_x$Se$_{1-x}$, evidence that the efficiency of this material is not exceptional. Indeed, the figure of merit for spin-charge interconversion, given by the product of these two parameters, is slightly under 1 nm. Our work demonstrates the importance of considering all material parameters and interfaces when quantifying the spin transport properties of materials with strong spin-orbit coupling.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Voltage-based magnetization switching and reading in magnetoelectric spin-orbit nanodevices
Authors:
Diogo C. Vaz,
Chia-Ching Lin,
John J. Plombon,
Won Young Choi,
Inge Groen,
Isabel C. Arango,
Andrey Chuvilin,
Luis E. Hueso,
Dmitri E. Nikonov,
Hai Li,
Punyashloka Debashis,
Scott B. Clendenning,
Tanay A. Gosavi,
Yen-Lin Huang,
Bhagwati Prasad,
Ramamoorthy Ramesh,
Aymeric Vecchiola,
Manuel Bibes,
Karim Bouzehouane,
Stephane Fusil,
Vincent Garcia,
Ian A. Young,
Fèlix Casanova
Abstract:
With the deceleration of dimensional and voltage scaling in CMOS technologies, the demand for novel logic devices has never been greater. While spin-based devices present a major opportunity towards favorable scaling, switching energies are still orders of magnitude above the expected values. Alternatively, magnetoelectric materials are predicted to enable low-power control of magnetization, a rel…
▽ More
With the deceleration of dimensional and voltage scaling in CMOS technologies, the demand for novel logic devices has never been greater. While spin-based devices present a major opportunity towards favorable scaling, switching energies are still orders of magnitude above the expected values. Alternatively, magnetoelectric materials are predicted to enable low-power control of magnetization, a relatively unexplored pathway with sparse results at a device level. Here, we demonstrate voltage-based magnetization switching and reading in nanodevices at room temperature, enabled by exchange coupling between multiferroic BiFeO$_3$ and ferromagnetic CoFe, for the writing, and spin-to-charge current conversion between CoFe and Pt, for the reading. Unlike other current-based spintronic devices, magnetization writing is driven solely by voltage pulses. We show that, upon electrical switching of the BiFeO$_3$, the magnetization of the CoFe can be reversed, giving rise to different voltage outputs. The voltage-induced switching is supported through a combination of piezoresponse, magnetic force microscopy, and scanning nitrogen-vacancy magnetometry, where magnetization reversal is linked with the polarization state and antiferromagnetic cycloid propagation direction in the BiFeO$_3$. This study constitutes the building block for magnetoelectric spin-orbit logic, as well as a new avenue for low-power beyond-CMOS technologies.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Emergence of large spin-charge interconversion at an oxidized Cu/W interface
Authors:
Inge Groen,
Van Tuong Pham,
Stefan Ilić,
Won Young Choi,
Andrey Chuvilin,
Edurne Sagasta,
Diogo C. Vaz,
Isabel C. Arango,
Nerea Ontoso,
F. Sebastian Bergeret,
Luis E. Hueso,
Ilya V. Tokatly,
Fèlix Casanova
Abstract:
Spin-orbitronic devices can integrate memory and logic by exploiting spin-charge interconversion (SCI), which is optimized by design and materials selection. In these devices, such as the magnetoelectric spin-orbit (MESO) logic, interfaces are crucial elements as they can prohibit or promote spin flow in a device as well as possess spin-orbit coupling resulting in interfacial SCI. Here, we study t…
▽ More
Spin-orbitronic devices can integrate memory and logic by exploiting spin-charge interconversion (SCI), which is optimized by design and materials selection. In these devices, such as the magnetoelectric spin-orbit (MESO) logic, interfaces are crucial elements as they can prohibit or promote spin flow in a device as well as possess spin-orbit coupling resulting in interfacial SCI. Here, we study the origin of SCI in a Py/Cu/W lateral spin valve and quantify its efficiency. An exhaustive characterization of the interface between Cu and W electrodes uncovers the presence of an oxidized layer (WO$_x$). We determine that the SCI occurs at the Cu/WO$_x$ interface with a temperature-independent interfacial spin-loss conductance of $G_{||} \approx$ 20 $\times$ 10$^{13} Ω^{-1}m^{-2}$ and an interfacial spin-charge conductivity $σ_{SC}=-$1610 $Ω^{-1}cm^{-1}$ at 10 K ($-$830 $Ω^{-1}cm^{-1}$ at 300 K). This corresponds to an efficiency given by the inverse Edelstein length $λ_{IEE}=-$0.76 nm at 10 K ($-$0.4 nm at 300 K), which is remarkably larger than in metal/metal and metal/oxide interfaces and bulk heavy metals. The large SCI efficiency at such an oxidized interface is a promising candidate for the magnetic readout in MESO logic devices.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
All-electrical spin-to-charge conversion in sputtered Bi$_x$Se$_{1-x}$
Authors:
Won Young Choi,
Isabel C. Arango,
Van Tuong Pham,
Diogo C. Vaz,
Haozhe Yang,
Inge Groen,
Chia-Ching Lin,
Emily S. Kabir,
Kaan Oguz,
Punyashloka Debashis,
John J. Plombon,
Hai Li,
Dmitri E. Nikonov,
Andrey Chuvilin,
Luis E. Hueso,
Ian A. Young,
Fèlix Casanova
Abstract:
One of the major obstacles to realizing spintronic devices such as MESO logic devices is the small signal magnitude used for magnetization readout, making it important to find materials with high spin-to-charge conversion efficiency. Although intermixing at the junction of two materials is a widely occurring phenomenon, its influence on material characterization and the estimation of spin-to-charg…
▽ More
One of the major obstacles to realizing spintronic devices such as MESO logic devices is the small signal magnitude used for magnetization readout, making it important to find materials with high spin-to-charge conversion efficiency. Although intermixing at the junction of two materials is a widely occurring phenomenon, its influence on material characterization and the estimation of spin-to-charge conversion efficiencies is easily neglected or underestimated. Here, we demonstrate all electrical spin-to-charge conversion in Bi$_x$Se$_{1-x}$ nanodevices and show how the conversion efficiency can be overestimated by tens of times depending on the adjacent metal used as a contact. We attribute this to the intermixing-induced compositional change and the properties of a polycrystal that lead to drastic changes in resistivity and spin Hall angle. Strategies to improve the spin-to-charge conversion signal in similar structures for functional devices are discussed.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Gate-tuneable and chirality-dependent charge-to-spin conversion in Tellurium nanowires
Authors:
Francesco Calavalle,
Manuel Suárez-Rodríguez,
Beatriz Martín-García,
Annika Johansson,
Diogo C. Vaz,
Haozhe Yang,
Igor V. Maznichenko,
Sergey Ostanin Aurelio Mateo-Alonso,
Andrey Chuvilin,
Ingrid Mertig,
Marco Gobbi,
Fèlix Casanova,
Luis E. Hueso
Abstract:
Chiral materials are the ideal playground for exploring the relation between symmetry, relativistic effects, and electronic transport. For instance, chiral organic molecules have been intensively studied to electrically generate spin-polarized currents in the last decade, but their poor electronic conductivity limits their potential for applications. Conversely, chiral inorganic materials such as…
▽ More
Chiral materials are the ideal playground for exploring the relation between symmetry, relativistic effects, and electronic transport. For instance, chiral organic molecules have been intensively studied to electrically generate spin-polarized currents in the last decade, but their poor electronic conductivity limits their potential for applications. Conversely, chiral inorganic materials such as Tellurium are excellent electrical transport materials, but have not been explored to enable the electrical control of spin polarization in devices. Here, we demonstrate the all-electrical generation, manipulation, and detection of spin polarization in chiral single-crystalline Tellurium nanowires. By recording a large (up to 7%) and chirality-dependent unidirectional magnetoresistance, we show that the orientation of the electrically generated spin polarization is determined by the nanowire handedness and uniquely follows the current direction, while its magnitude can be manipulated by an electrostatic gate. Our results pave the way for the development of magnet-free chirality-based spintronic devices.
△ Less
Submitted 2 January, 2022;
originally announced January 2022.
-
Non-collinear and strongly asymmetric polar moments at back-gated SrTiO3 interfaces
Authors:
Fryderyk Lyzwa,
Yurii G. Pashkevich,
Premysl Marsik,
Andrei Sirenko,
Andrew Chan,
Benjamin P. P. Mallett,
Meghdad Yazdi-Rizi,
Bing Xu,
Luis M. Vicente-Arche,
Diogo C. Vaz,
Gervasi Herranz,
Maximilien Cazayous,
Pierre Hemme,
Katrin Fürsich,
Matteo Minola,
Bernhard Keimer,
Manuel Bibes,
Christian Bernhard
Abstract:
The highly mobile electrons at the interface of SrTiO3 with other oxide insulators, such as LaAlO3 or AlOx, are of great current interest. A vertical gate voltage allows controlling a metal/superconductor-to-insulator transition, as well as electrical modulation of the spin-orbit Rashba coupling for spin-charge conversion. These findings raise important questions about the origin of the confined e…
▽ More
The highly mobile electrons at the interface of SrTiO3 with other oxide insulators, such as LaAlO3 or AlOx, are of great current interest. A vertical gate voltage allows controlling a metal/superconductor-to-insulator transition, as well as electrical modulation of the spin-orbit Rashba coupling for spin-charge conversion. These findings raise important questions about the origin of the confined electrons as well as the mechanisms that govern the interfacial electric field. Here we use infrared ellipsometry and confocal Raman spectroscopy to show that an anomalous polar moment is induced at the interface that is non-collinear, highly asymmetric and hysteretic with respect to the vertical gate electric field. Our data indicate that an important role is played by the electromigration of oxygen vacancies and their clustering at the antiferrodistortive domain boundaries of SrTiO3, which generates local electric and possibly also flexoelectric fields and subsequent polar moments with a large lateral component. Our results open new perspectives for the defect engineering of lateral devices with strongly enhanced and hysteretic local electric fields that can be manipulated with various other parameters, like strain, temperature, or photons.
△ Less
Submitted 14 September, 2021;
originally announced September 2021.
-
Spin-charge interconversion in KTaO$_3$ two-dimensional electron gases
Authors:
Luis M. Vicente-Arche,
Julien Bréhin,
Sara Varotto,
Maxen Cosset-Cheneau,
Srijani Mallik,
Raphaël Salazar,
Paul Noël,
Diogo Castro Vaz,
Felix Trier,
Suvam Bhattacharya,
Anke Sander,
Patrick Le Fèvre,
François Bertran,
Guilhem Saiz,
Gerbold Ménard,
Nicolas Bergeal,
Agnès Barthélémy,
Hai Li,
Chia-Ching Lin,
Dmitri E. Nikonov,
Ian A. Young,
Julien Rault,
Laurent Vila,
Jean-Philippe Attané,
Manuel Bibes
Abstract:
Oxide interfaces exhibit a broad range of physical effects stemming from broken inversion symmetry. In particular, they can display non-reciprocal phenomena when time reversal symmetry is also broken, e.g., by the application of a magnetic field. Examples include the direct and inverse Edelstein effects (DEE, IEE) that allow the interconversion between spin currents and charge currents. The DEE an…
▽ More
Oxide interfaces exhibit a broad range of physical effects stemming from broken inversion symmetry. In particular, they can display non-reciprocal phenomena when time reversal symmetry is also broken, e.g., by the application of a magnetic field. Examples include the direct and inverse Edelstein effects (DEE, IEE) that allow the interconversion between spin currents and charge currents. The DEE and IEE have been investigated in interfaces based on the perovskite SrTiO$_3$ (STO), albeit in separate studies focusing on one or the other. The demonstration of these effects remains mostly elusive in other oxide interface systems despite their blossoming in the last decade. Here, we report the observation of both the DEE and IEE in a new interfacial two-dimensional electron gas (2DEG) based on the perovskite oxide KTaO$_3$. We generate 2DEGs by the simple deposition of Al metal onto KTaO$_3$ single crystals, characterize them by angle-resolved photoemission spectroscopy and magnetotransport, and demonstrate the DEE through unidirectional magnetoresistance and the IEE by spin-pum** experiments. We compare the spin-charge interconversion efficiency with that of STO-based interfaces, relate it to the 2DEG electronic structure, and give perspectives for the implementation of KTaO$_3$ 2DEGs into spin-orbitronic devices.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Determining the Rashba parameter from the bilinear magnetoresistance response in a two-dimensional electron gas
Authors:
D. C. Vaz,
F. Trier,
A. Dyrdał,
A. Johansson,
K. Garcia,
A. Barthélémy,
I. Mertig,
J. Barnaś,
A. Fert,
M. Bibes
Abstract:
Two-dimensional (2D) Rashba systems have been intensively studied in the last decade due to their unconventional physics, tunability capabilities, and potential for spin-charge interconversion when compared to conventional heavy metals. With the advent of a new generation of spin-based logic and memory devices, the search for Rashba systems with more robust and larger conversion efficiencies is ex…
▽ More
Two-dimensional (2D) Rashba systems have been intensively studied in the last decade due to their unconventional physics, tunability capabilities, and potential for spin-charge interconversion when compared to conventional heavy metals. With the advent of a new generation of spin-based logic and memory devices, the search for Rashba systems with more robust and larger conversion efficiencies is expanding. Conventionally, demanding techniques such as angle- and spin-resolved photoemission spectroscopy are required to determine the Rashba parameter $α_{R}$ that characterizes these systems. Here, we introduce a simple method that allows a quantitative extraction of $α_{R}$, through the analysis of the bilinear response of angle-dependent magnetotransport experiments. This method is based on the modulation of the Rashba-split bands under a rotating in-plane magnetic field. We show that our method is able to correctly yield the value of $α_{R}$ for a wide range of Fermi energies in the 2D electron gas at the LaAlO$_{3}$/SrTiO$_{3}$ interface. By applying a gate voltage, we observe a maximum $α_{R}$ in the region of the band structure where interband effects maximize the Rashba effect, consistently with theoretical predictions.
△ Less
Submitted 7 July, 2020;
originally announced July 2020.
-
Quantized conductance in a one-dimensional ballistic oxide nanodevice
Authors:
A. Jouan,
G. Singh,
E. Lesne,
D. C. Vaz,
M. Bibes,
A. Barthélémy,
C. Ulysse,
D. Stornaiuolo,
M. Salluzzo,
S. Hurand,
J. Lesueur,
C. Feuillet-Palma,
N. Bergeal
Abstract:
Electric-field effect control of two-dimensional electron gases (2-DEG) has enabled the exploration of nanoscale electron quantum transport in semiconductors. Beyond these classical materials, transition metal-oxide-based structures have d-electronic states favoring the emergence of novel quantum orders absent in conventional semiconductors. In this context, the LaAlO3/SrTiO3 interface that combin…
▽ More
Electric-field effect control of two-dimensional electron gases (2-DEG) has enabled the exploration of nanoscale electron quantum transport in semiconductors. Beyond these classical materials, transition metal-oxide-based structures have d-electronic states favoring the emergence of novel quantum orders absent in conventional semiconductors. In this context, the LaAlO3/SrTiO3 interface that combines gate-tunable superconductivity and sizeable spin-orbit coupling is emerging as a promising platform to realize topological superconductivity. However, the fabrication of nanodevices in which the electronic properties of this oxide interface can be controlled at the nanoscale by field-effect remains a scientific and technological challenge. Here, we demonstrate the quantization of conductance in a ballistic quantum point contact (QPC), formed by electrostatic confinement of the LaAlO3/SrTiO3 2-DEG with a split-gate. Through finite source-drain voltage, we perform a comprehensive spectroscopic investigation of the 3d energy levels inside the QPC, which can be regarded as a spectrometer able to probe Majorana states in an oxide 2-DEG.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
Tuning up or down the critical thickness in LaAlO3/SrTiO3 through in situ deposition of metal overlayers
Authors:
D. C. Vaz,
E. Lesne,
H. Naganuma,
E. Jacquet,
J. Santamaria,
A. Barthelemy,
M. Bibes
Abstract:
The quasi 2D electron system (q2DES) that forms at the interface between LaAlO3 and SrTiO3 has attracted much attention from the oxide electronics community. One of its hallmark features is the existence of a critical LaAlO3 thickness of 4 unit-cells (uc) for interfacial conductivity to emerge. In this paper, the chemical, electronic, and transport properties of LaAlO3/SrTiO3 samples capped with d…
▽ More
The quasi 2D electron system (q2DES) that forms at the interface between LaAlO3 and SrTiO3 has attracted much attention from the oxide electronics community. One of its hallmark features is the existence of a critical LaAlO3 thickness of 4 unit-cells (uc) for interfacial conductivity to emerge. In this paper, the chemical, electronic, and transport properties of LaAlO3/SrTiO3 samples capped with different metals grown in a system combining pulsed laser deposition, sputtering, and in situ X-ray photoemission spectroscopy are investigated. The results show that for metals with low work function a q2DES forms at 1-2 uc of LaAlO3 and is accompanied by a partial oxidation of the metal, a phenomenon that affects the q2DES properties and triggers the formation of defects. In contrast, for noble metals, the critical thickness is increased above 4 uc. The results are discussed in terms of a hybrid mechanism that incorporates electrostatic and chemical effects.
△ Less
Submitted 30 August, 2017;
originally announced August 2017.
-
Highly efficient and tuneable spin-to-charge conversion through Rashba coupling at oxide interfaces
Authors:
E. Lesne,
Y. Fu,
S. Oyarzun,
J. C. Rojas-Sanchez,
D. C. Vaz,
H. Naganuma,
G. Sicoli,
J. -P. Attane,
M. Jamet,
E. Jacquet,
J. -M. George,
A. Barthelemy,
H. Jaffres,
A. Fert,
M. Bibes,
L. Vila
Abstract:
The spin-orbit interaction couples the electrons' motion to their spin. Accordingly, passing a current in a material with strong spin-orbit coupling generates a transverse spin current (spin Hall effect, SHE) and vice-versa (inverse spin Hall effect, ISHE). The emergence of SHE and ISHE as charge-to-spin interconversion mechanisms offers a variety of novel spintronics functionalities and devices,…
▽ More
The spin-orbit interaction couples the electrons' motion to their spin. Accordingly, passing a current in a material with strong spin-orbit coupling generates a transverse spin current (spin Hall effect, SHE) and vice-versa (inverse spin Hall effect, ISHE). The emergence of SHE and ISHE as charge-to-spin interconversion mechanisms offers a variety of novel spintronics functionalities and devices, some of which do not require any ferromagnetic material. However, the interconversion efficiency of SHE and ISHE (spin Hall angle) is a bulk property that rarely exceeds ten percent, and does not take advantage of interfacial and low-dimensional effects otherwise ubiquitous in spintronics hetero- and mesostructures. Here, we make use of an interface-driven spin-orbit coupling mechanism - the Rashba effect - in the oxide two-dimensional electron system (2DES) LaAlO3/SrTiO3 to achieve spin-to-charge conversion with unprecedented efficiency. Through spin-pum**, we inject a spin current from a NiFe film into the oxide 2DES and detect the resulting charge current, which can be strongly modulated by a gate voltage. We discuss the amplitude of the effect and its gate dependence on the basis of the electronic structure of the 2DES.
△ Less
Submitted 21 September, 2016;
originally announced September 2016.
