Showing 1–22 of 22 results for author: Van der Ven, A

Chemo-mechanics in alloy phase stability

Authors: Sesha Sai Behara, John C. Thomas, Brian Puchala, Anton Van der Ven

Abstract: We describe a first-principles statistical mechanics method to calculate the free energies of crystalline alloys that depend on temperature, composition, and strain. The approach relies on an extension of the alloy cluster expansion to include an explicit dependence on homogeneous strain in addition to site occupation variables that track the degree of chemical ordering. The method is applied to t… ▽ More We describe a first-principles statistical mechanics method to calculate the free energies of crystalline alloys that depend on temperature, composition, and strain. The approach relies on an extension of the alloy cluster expansion to include an explicit dependence on homogeneous strain in addition to site occupation variables that track the degree of chemical ordering. The method is applied to the Si-Ge binary alloy and is used to calculate free energies that describe phase stability under arbitrary epitaxial constraints. We find that while the incoherent phase diagram (in which coexisting phases are not affected by coherency constraints) hosts a miscibility gap, coherent phase equilibrium predicts ordering and negative enthalpies of mixing. Instead of chemical instability, the chemo-mechanical free energy exhibits instabilities along directions that couple the composition of the alloy with a volumetric strain order parameter. This has fundamental implications for phase field models of spinodal decomposition as it indicates the importance of gradient energy coefficients that couple gradients in composition with gradients in strain. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Thermodynamically Informed Priors for Uncertainty Propagation in First-Principles Statistical Mechanics

Authors: Derick E. Ober, Anton Van der Ven

Abstract: This work demonstrates how first-principles thermodynamic research within a Bayesian framework can quantify and propagate uncertainties to downstream thermodynamic calculations. To address the issue of Bayesian prior selection, knowledge of zero Kelvin ground states in the material system of interest is incorporated into the prior. The effectiveness of this framework is shown by creating a phase d… ▽ More This work demonstrates how first-principles thermodynamic research within a Bayesian framework can quantify and propagate uncertainties to downstream thermodynamic calculations. To address the issue of Bayesian prior selection, knowledge of zero Kelvin ground states in the material system of interest is incorporated into the prior. The effectiveness of this framework is shown by creating a phase diagram for the FCC Zirconium Nitride system, including confidence intervals on phase boundary regions of interest. △ Less

Submitted 20 October, 2023; v1 submitted 21 September, 2023; originally announced September 2023.

Comments: 13 pages, 10 figures

CASM Monte Carlo: Calculations of the thermodynamic and kinetic properties of complex multicomponent crystals

Authors: Brian Puchala, John C. Thomas, Anton Van der Ven

Abstract: Monte Carlo techniques play a central role in statistical mechanics approaches for connecting macroscopic thermodynamic and kinetic properties to the electronic structure of a material. This paper describes the implementation of Monte Carlo techniques for the study multicomponent crystalline materials within the Clusters Approach to Statistical Mechanics (CASM) software suite, and demonstrates the… ▽ More Monte Carlo techniques play a central role in statistical mechanics approaches for connecting macroscopic thermodynamic and kinetic properties to the electronic structure of a material. This paper describes the implementation of Monte Carlo techniques for the study multicomponent crystalline materials within the Clusters Approach to Statistical Mechanics (CASM) software suite, and demonstrates their use in model systems to calculate free energies and kinetic coefficients, study phase transitions, and construct first-principles based phase diagrams. Many crystal structures are complex, with multiple sublattices occupied by differing sets of chemical species, along with the presence of vacancies or interstitial species. This imposes constraints on concentration variables, the form of thermodynamic potentials, and the values of kinetic transport coefficients. The framework used by CASM to formulate thermodynamic potentials and kinetic transport coefficients accounting for arbitrarily complex crystal structures is presented and demonstrated with examples applying it to crystal systems of increasing complexity. Additionally, a new software package is introduced, casm-flow, which helps automate the setup, submission, management, and analysis of Monte Carlo simulations performed using CASM. △ Less

Submitted 20 September, 2023; originally announced September 2023.

Ferroelastic toughening: can it solve the mechanics challenges of solid electrolytes?

Authors: Anton Van der Ven, Robert M. McMeeking, Raphaële J. Clément, Krishna Garikipati

Abstract: The most promising solid electrolytes for all-solid-state Li batteries are oxide and sulfide ceramics. Current ceramic solid electrolytes are brittle and lack the toughness to withstand the mechanical stresses of repeated charge and discharge cycles. Solid electrolytes are susceptible to crack propagation due to dendrite growth from Li metal anodes and to debonding processes at the cathode/electro… ▽ More The most promising solid electrolytes for all-solid-state Li batteries are oxide and sulfide ceramics. Current ceramic solid electrolytes are brittle and lack the toughness to withstand the mechanical stresses of repeated charge and discharge cycles. Solid electrolytes are susceptible to crack propagation due to dendrite growth from Li metal anodes and to debonding processes at the cathode/electrolyte interface due to cyclic variations in the cathode lattice parameters. In this perspective, we argue that solutions to the mechanics challenges of all-solid-state batteries can be borrowed from the aerospace industry, which successfully overcame similar hurdles in the development of thermal barrier coatings of superalloy turbine blades. Their solution was to exploit ferroelastic and transformation toughening mechanisms to develop ceramics that can withstand cyclic stresses due to large variations in temperature. This perspective describes fundamental materials design principles with which to search for solid electrolytes that are ferroelastically toughened. △ Less

Submitted 18 February, 2023; originally announced February 2023.

Comments: 8 pages, 8 figures

Inducing Skyrmion Flop Transitions in Co$_8$Zn$_8$Mn$_4$ at Room Temperature

Authors: Simon A. Meynell, Yolita M. Eggeler, Joshua D. Bocarsly, Daniil A. Kitchaev, Bailey E. Rhodes, Tresa M. Pollock, Stephen D. Wilson, Anton Van der Ven, Ram Seshadri, Marc De Graef, Ania Bleszynski Jayich, Daniel S. Gianola

Abstract: Magnetic skyrmions are topologically-protected spin textures that manifest in certain non-centrosymmetric ferromagnets under the right conditions of temperature and field. In thin film skyrmion hosts, demagnetization effects combined with geometric confinement can result in two distinct types of spin textures: those with their axis of symmetry in the plane of the film (IP) and those with their axi… ▽ More Magnetic skyrmions are topologically-protected spin textures that manifest in certain non-centrosymmetric ferromagnets under the right conditions of temperature and field. In thin film skyrmion hosts, demagnetization effects combined with geometric confinement can result in two distinct types of spin textures: those with their axis of symmetry in the plane of the film (IP) and those with their axis pointing out-of-plane (OOP). Here we present Lorentz transmission electron microscopy evidence in conjunction with numerical modeling showing a flop transition between IP and OOP skyrmions in Co$_8$Zn$_8$Mn$_4$ at room temperature. We show that this skyrmion flop transition is controllable via the angle of the external field relative to the film normal and we illustrate how this transition depends on thickness. Finally, we propose a skyrmion-writing device that utilizes the details of this transition. △ Less

Submitted 1 December, 2022; originally announced December 2022.

Comments: 8 pages, 5 figures

Tuning magnetic antiskyrmion stability in tetragonal inverse Heusler alloys

Authors: Daniil A. Kitchaev, Anton Van der Ven

Abstract: The identification of materials supporting complex, tunable magnetic order at ambient temperatures is foundational to the development of new magnetic device architectures. We report the design of Mn2XY tetragonal inverse Heusler alloys that are capable of hosting magnetic antiskyrmions whose stability is sensitive to elastic strain. We first construct a universal magnetic Hamiltonian capturing the… ▽ More The identification of materials supporting complex, tunable magnetic order at ambient temperatures is foundational to the development of new magnetic device architectures. We report the design of Mn2XY tetragonal inverse Heusler alloys that are capable of hosting magnetic antiskyrmions whose stability is sensitive to elastic strain. We first construct a universal magnetic Hamiltonian capturing the short- and long- range magnetic order which can be expected in these materials. This model reveals critical combinations of magnetic interactions that are necessary to approach a magnetic phase boundary, where the magnetic structure is highly susceptible to small perturbations such as elastic strain. We then computationally search for quaternary Mn2(X1,X2)Y alloys where these critical interactions may be realized and which are likely to be synthesizable in the inverse Heusler structure. We identify the Mn2Pt(1-z)X(z)Ga family of materials with X=Au, Ir, Ni as an ideal system for accessing all possible magnetic phases, with several critical compositions where magnetic phase transitions may be actuated mechanically. △ Less

Submitted 23 September, 2021; originally announced September 2021.

Magnetoentropic map** and computational modeling of cycloids and skyrmions in the lacunar spinels GaV$_4$S$_8$ and GaV$_4$Se$_8$

Authors: Julia L. Zuo, Daniil Kitchaev, Emily C. Schueller, Joshua D. Bocarsly, Ram Seshadri, Anton Van der Ven, Stephen D. Wilson

Abstract: We report the feasibility of using magnetoentropic map** for the rapid identification of magnetic cycloid and skyrmion phases in uniaxial systems, based on the GaV4S8 and GaV4Se8 model skyrmion hosts with easy-axis and easy-plane anisotropies respectively. We show that these measurements can be interpreted with the help of a simple numerical model for the spin Hamiltonian to yield unambiguous as… ▽ More We report the feasibility of using magnetoentropic map** for the rapid identification of magnetic cycloid and skyrmion phases in uniaxial systems, based on the GaV4S8 and GaV4Se8 model skyrmion hosts with easy-axis and easy-plane anisotropies respectively. We show that these measurements can be interpreted with the help of a simple numerical model for the spin Hamiltonian to yield unambiguous assignments for both single phase regions and phase boundaries. In the two lacunar spinel chemistries, we obtain excellent agreement between the measured magnetoentropic features and a minimal spin Hamiltonian built on Heisenberg exchange, single-ion anisotropy, and anisotropic Dzyaloshinskii-Moriya interactions. In particular, we identify characteristic high-entropy behavior in the cycloid phase that serves as a precursor to the formation of skyrmions at elevated temperatures and is a readily-measurable signature of this phase transition. Our results demonstrate that rapid magnetoentropic map** guided by numerical modeling is an effective means of understanding the complex magnetic phase diagrams innate to skyrmion hosts. One notable exception is the observation of an anomalous, low-temperature high-entropy state in the easy-plane system GaV$_4$Se$_8$, which is not captured in the numerical model. Possible origins of this state are discussed. △ Less

Submitted 6 July, 2021; originally announced July 2021.

Comments: 10 pages and 7 figures

Journal ref: Phys. Rev. Materials 5, 054410 (2021)

Investigating the electronic origins of the repulsion between substitutional and interstitial solutes in hcp Ti

Authors: N. S. Harsha Gunda, Carlos G. Levi, Anton Van der Ven

Abstract: The high solubility of oxygen in Ti, Zr and Hf makes it difficult to stabilize the protective oxide scales on their surfaces as the subsurface regions can serve as boundless sinks that continuously dissolve oxygen. Alloying elements are crucial to reduce the oxygen solubility and diffusivity within early transition metals. Past studies have shown that substitutional alloying additions to titanium… ▽ More The high solubility of oxygen in Ti, Zr and Hf makes it difficult to stabilize the protective oxide scales on their surfaces as the subsurface regions can serve as boundless sinks that continuously dissolve oxygen. Alloying elements are crucial to reduce the oxygen solubility and diffusivity within early transition metals. Past studies have shown that substitutional alloying additions to titanium repel interstitial oxygen. Here we use first-principles calculations to show that this repulsion is short ranged and identify a variety of factors that are likely responsible for the repulsive interaction. We identify a unique hybridization phenomenon between dissolved substitutional elements and interstitial oxygen within hcp Ti that leads to a repulsive interaction at short distances, similar to that between closed-shell atoms. Calculations of Bader charges also suggest the existence of short-range Coulomb interactions due to the accumulation of charge on the substitutional solute and interstitial oxygen that is drawn from the Ti host. △ Less

Submitted 21 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. Materials 5, 073604 (2021)

MultiShifter: software to generate structural models of extended two-dimensional defects in 3D and 2D crystals

Authors: Jon Gabriel Goiri, Anton Van der Ven

Abstract: Extended defects in crystals, such as dislocations, stacking faults and grain boundaries, play a crucial role in determining a wide variety of materials properties. Extended defects can also lead to novel electronic properties in two-dimensional materials, as demonstrated by recent discoveries of emergent electronic phenomena in twisted graphene bilayers. This paper describes several approaches to… ▽ More Extended defects in crystals, such as dislocations, stacking faults and grain boundaries, play a crucial role in determining a wide variety of materials properties. Extended defects can also lead to novel electronic properties in two-dimensional materials, as demonstrated by recent discoveries of emergent electronic phenomena in twisted graphene bilayers. This paper describes several approaches to construct crystallographic models of two-dimensional extended defects in crystals for first-principles electronic structure calculations, including (i) crystallographic models to parameterize generalized cohesive zone models for fracture studies and meso-scale models of dislocations and (ii) crystallographic models of twisted bilayers. The approaches are implemented in an open source software package called MultiShifter. △ Less

Submitted 22 January, 2021; v1 submitted 21 November, 2020; originally announced November 2020.

Structural evolution and skyrmionic phase diagram of the lacunar spinel GaMo$_4$Se$_8$

Authors: Emily C. Schueller, Daniil A. Kitchaev, Julia L. Zuo, Joshua D. Bocarsly, Joya A. Cooley, Anton Van der Ven, Stephen D. Wilson

Abstract: In the $AB_4Q_8$ lacunar spinels, the electronic structure is described on the basis of inter- and intra-cluster interactions of tetrahedral $B_4$ clusters, and tuning these can lead to myriad fascinating electronic and magnetic ground states. In this work, we employ magnetic measurements, synchrotron X-ray and neutron scattering, and first-principles electronic structure calculations to examine t… ▽ More In the $AB_4Q_8$ lacunar spinels, the electronic structure is described on the basis of inter- and intra-cluster interactions of tetrahedral $B_4$ clusters, and tuning these can lead to myriad fascinating electronic and magnetic ground states. In this work, we employ magnetic measurements, synchrotron X-ray and neutron scattering, and first-principles electronic structure calculations to examine the coupling between structural and magnetic phase evolution in GaMo$_4$Se$_8$, including the emergence of a skyrmionic regime in the magnetic phase diagram. We show that the competition between two distinct Jahn-Teller distortions of the room temperature cubic $F\overline{4}3m$ structure leads to the coexistence of the ground state $R3m$ phase and a metastable $Imm2$ phase. The magnetic properties of these two phases are computationally shown to be very different, with the $Imm2$ phase exhibiting uniaxial ferromagnetism and the $R3m$ phase hosting a complex magnetic phase diagram including equilibrium Néel--type skyrmions stable from nearly $T$ = 28 K down to $T$ = 2 K, the lowest measured temperature. The large change in magnetic behavior induced by a small structural distortion reveals that GaMo$_4$Se$_8$ is an exciting candidate material for tuning unconventional magnetic properties $via$ mechanical means. △ Less

Submitted 13 May, 2020; originally announced May 2020.

Journal ref: Phys. Rev. Materials 4, 064402 (2020)

Linking electronic structure calculations to generalized stacking fault energies in multicomponent alloys

Authors: Anirudh Raju Natarajan, Anton Van der Ven

Abstract: The generalized stacking fault energy is a key ingredient to mesoscale models of dislocations. Here we develop an approach to quantify the dependence of generalized stacking fault energies on the degree of chemical disorder in multicomponent alloys. We introduce the notion of a "configurationally-resolved planar fault" (CRPF) energy and extend the cluster expansion method from alloy theory to expr… ▽ More The generalized stacking fault energy is a key ingredient to mesoscale models of dislocations. Here we develop an approach to quantify the dependence of generalized stacking fault energies on the degree of chemical disorder in multicomponent alloys. We introduce the notion of a "configurationally-resolved planar fault" (CRPF) energy and extend the cluster expansion method from alloy theory to express the CRPF as a function of chemical occupation variables of sites surrounding the fault. We apply the approach to explore the composition and temperature dependence of the unstable stacking fault energy (USF) in binary Mo-Nb alloys. First-principles calculations are used to parameterize a formation energy and CRPF cluster expansion. Monte Carlo simulations show that the distribution of USF energies is significantly affected by chemical composition and temperature. The formalism can be applied to any multicomponent alloy and will enable the development of rigorous models for deformation mechanisms in high-entropy alloys. △ Less

Submitted 19 January, 2020; originally announced January 2020.

Map** Skyrmion Stability in Uniaxial Lacunar Spinel Magnets from First-Principles

Authors: Daniil A. Kitchaev, Emily C. Schueller, Anton Van der Ven

Abstract: The identification of general principles for stabilizing magnetic skyrmion phases in bulk materials over wide ranges of temperatures is a prerequisite to the development of skyrmion-based spintronic devices. Lacunar spinels with the formula GaM4X8 with M=V, Mo; X=S, Se are a convenient case study towards this goal as they are some of the first bulk systems suggested to host equilibrium chiral skyr… ▽ More The identification of general principles for stabilizing magnetic skyrmion phases in bulk materials over wide ranges of temperatures is a prerequisite to the development of skyrmion-based spintronic devices. Lacunar spinels with the formula GaM4X8 with M=V, Mo; X=S, Se are a convenient case study towards this goal as they are some of the first bulk systems suggested to host equilibrium chiral skyrmions far from the paramagnetic transition. We derive the magnetic phase diagrams likely to be observed in these materials, accounting for all possible magnetic interactions, and prove that skyrmion stability in the lacunar spinels is a general consequence of their crystal symmetry rather than the details of the material chemistry. Our results are consistent with all experimental reports in this space and demonstrate that the differences in the phase diagrams of particular spinel chemistries are determined by magnetocrystalline anisotropy, up to a normalization factor. We conclude that skyrmion formation over wide ranges of temperatures can be expected in all lacunar spinels, as well as in a wide range of uniaxial systems with low magnetocrystalline anisotropy. △ Less

Submitted 22 January, 2020; v1 submitted 25 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. B 101, 054409 (2020)

Modeling magnetic evolution and exchange hardening in disordered magnets: The example of Mn$_{1-x}$Fe$_x$Ru$_2$Sn Heusler alloys

Authors: Elizabeth Decolvenaere, Emily Levin, Ram Seshadri, Anton Van der Ven

Abstract: We demonstrate how exchange hardening can arise in a chemically-disordered solid solution from a first-principles statistical mechanics approach. A general mixed-basis chemical and magnetic cluster expansion has been developed, and applied to the Mn$_{1-x}$Fe$_x$Ru$_2$Sn Heusler alloy system; single-phase solid solutions between antiferromagnetic \ch{MnRu2Sn} and ferromagnetic \ch{FeRu2Sn} with di… ▽ More We demonstrate how exchange hardening can arise in a chemically-disordered solid solution from a first-principles statistical mechanics approach. A general mixed-basis chemical and magnetic cluster expansion has been developed, and applied to the Mn$_{1-x}$Fe$_x$Ru$_2$Sn Heusler alloy system; single-phase solid solutions between antiferromagnetic \ch{MnRu2Sn} and ferromagnetic \ch{FeRu2Sn} with disorder on the Mn/Fe sublattice that exhibit unexpected exchange hardening. Monte Carlo simulations applied to the cluster expansion are able to reproduce the experimentally measured magnetic transition temperatures and the bulk magnetization as a function of composition. The magnetic ordering around a site is shown to be dependent not only on bulk composition, but also on the identity of the site and the local composition around that site. The simulations predict that local antiferromagnetic orderings form inside a bulk ferromagnetic region at intermediate compositions that drives the exchange hardening. Furthermore, the antiferromagnetic regions disorder at a lower temperature than the ferromagnetic regions, providing an atomistic explanation for the experimentally-observed decrease in exchange hardening with increasing temperature. These effects occur on a length scale too small to be resolved with previously-used characterization techniques. △ Less

Submitted 16 October, 2019; originally announced October 2019.

Comments: 6 Pages, 4 Figures

Journal ref: Phys. Rev. Materials 3 10 (2019) 104411

Machine learning the DFT potential energy surface for inorganic halide perovskite CsPbBr$_3$

Authors: John C. Thomas, Jonathon S. Bechtel, Anirudh Raju Natarajan, Anton Van der Ven

Abstract: Structural phase transitions as a function of temperature dictate the structure--functionality relationships in many technologically important materials. Harmonic Hamiltonians have proven successful in predicting the vibrational properties of many materials. However, they are inadequate for modeling structural phase transitions in crystals with potential energy surfaces that are either strongly an… ▽ More Structural phase transitions as a function of temperature dictate the structure--functionality relationships in many technologically important materials. Harmonic Hamiltonians have proven successful in predicting the vibrational properties of many materials. However, they are inadequate for modeling structural phase transitions in crystals with potential energy surfaces that are either strongly anharmonic or no\ n-convex with respect to collective atomic displacements or homogeneous strains. In this paper we develop a framework to express highly anharmonic first-principles potential energy surfaces as polynomials of collective cluster deformati\ ons. We further adapt the approach to a nonlinear extension of the cluster expansion formalism through the use of an artificial neural net model. The machine learning models are trained on a large database of first-principles calculations and are shown to reproduce the potential energy surface with l\ ow error. △ Less

Submitted 27 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. B 100, 134101 (2019)

Machine learning materials physics: Integrable deep neural networks enable scale bridging by learning free energy functions

Authors: G. H. Teichert, A. R. Natarajan, A. Van der Ven, K. Garikipati

Abstract: The free energy of a system is central to many material models. Although free energy data is not generally found directly, its derivatives can be observed or calculated. In this work, we present an Integrable Deep Neural Network (IDNN) that can be trained to derivative data, then analytically integrated to recover an accurate representation of the free energy. The IDNN is demonstrated by training… ▽ More The free energy of a system is central to many material models. Although free energy data is not generally found directly, its derivatives can be observed or calculated. In this work, we present an Integrable Deep Neural Network (IDNN) that can be trained to derivative data, then analytically integrated to recover an accurate representation of the free energy. The IDNN is demonstrated by training to the chemical potential values of a binary alloy with B2 ordering. The resulting DNN representation of the free energy is used in a phase field simulation and found to predict the appropriate formation of antiphase boundaries in the material. In contrast, a B-spline representation of the same data failed to represent the physics of the system with sufficient fidelity to resolve the antiphase boundaries. △ Less

Submitted 16 May, 2019; v1 submitted 31 December, 2018; originally announced January 2019.

Comments: 23 pages, 12 figures

First-principles investigation of competing magnetic interactions in (Mn,Fe)Ru$_2$Sn Heusler solid solutions

Authors: Elizabeth Decolvenaere, Michael Gordon, Ram Seshadri, Anton Van der Ven

Abstract: Many Heusler compounds possess magnetic properties well-suited for applications as spintronic materials. The pseudo-binary Mn$_{0.5}$Fe$_{0.5}$Ru$_2$Sn, formed as a solid solution of two full Heuslers, has recently been shown to exhibit exchange hardening suggestive of two magnetic phases, despite existing as a \textit{single} chemical phase. We have performed a first-principles study of the chemi… ▽ More Many Heusler compounds possess magnetic properties well-suited for applications as spintronic materials. The pseudo-binary Mn$_{0.5}$Fe$_{0.5}$Ru$_2$Sn, formed as a solid solution of two full Heuslers, has recently been shown to exhibit exchange hardening suggestive of two magnetic phases, despite existing as a \textit{single} chemical phase. We have performed a first-principles study of the chemical and magnetic degrees of freedom in the Mn$_{1-x}$Fe$_{x}$Ru$_2$Sn pseudo-binary to determine the origin of the unique magnetic behavior responsible for exchange hardening within a single phase. We find a transition from antiferromagnetic (AFM) to ferromagnetic (FM) behavior upon replacement of Mn with Fe, consistent with experimental results. The lowest energy orderings in Mn$_{1-x}$Fe$_{x}$Ru$_2$Sn consist of chemically- and magnetically-uniform (111) planes, with Fe-rich regions preferring FM ordering and Mn-rich regions preferring AFM ordering, independent of the overall composition. Analysis of the electronic structure suggests that the magnetic behavior of this alloy arises from a competition between AFM-favoring Sn-mediated superexchange and FM-favoring RKKY exchange mediated by spin-polarized conduction electrons. Changes in valency upon replacement of Mn with Fe shifts the balance from superexchange-dominated interactions to RKKY-dominated interactions. △ Less

Submitted 5 October, 2017; originally announced October 2017.

Comments: 14 pages, 9 figures

Journal ref: Phys Rev B. 96 (2017) 165109

Multi-physics simulations of lithiation-induced stress in Li$_{\rm 1+x}$Ti$_2$O$_4$ electrode particles

Authors: Tonghu Jiang, Shiva Rudraraju, Anindya Roy, Anton Van der Ven, Krishna Garikipati, Michael L. Falk

Abstract: Cubic spinel Li$_{\rm 1+x}$Ti$_2$O$_4$ is a promising electrode material as it exhibits a high lithium diffusivity and undergoes minimal changes in lattice parameters during lithiation and delithiation, thereby ensuring favorable cycleability. The present work is a multi-physics and multi-scale study of Li$_{\rm 1+x}$Ti$_2$O$_4$ that combines first principles computations of thermodynamic and kine… ▽ More Cubic spinel Li$_{\rm 1+x}$Ti$_2$O$_4$ is a promising electrode material as it exhibits a high lithium diffusivity and undergoes minimal changes in lattice parameters during lithiation and delithiation, thereby ensuring favorable cycleability. The present work is a multi-physics and multi-scale study of Li$_{\rm 1+x}$Ti$_2$O$_4$ that combines first principles computations of thermodynamic and kinetic properties with continuum scale modeling of lithiation-delithiation kinetics. Density functional theory calculations and statistical mechanics methods are used to calculate lattice parameters, elastic coefficients, thermodynamic potentials, migration barriers and Li diffusion coefficients. These quantities then inform a phase field framework to model the coupled chemo-mechanical evolution of electrode particles. Several case studies accounting for either homogeneous or heterogeneous nucleation are considered to explore the temporal evolution of maximum principle stress values, which serve to indicate stress localization and the potential for crack initiation, during lithiation and delithiation. △ Less

Submitted 27 September, 2016; originally announced September 2016.

Comments: 12 pages, 10 figures

Recovering 0 Kelvin Effective Hamiltonian Parameters from High-Temperature Disordered Phases

Authors: Elizabeth Decolvenaere, Michael J. Gordon, Anton Van der Ven

Abstract: Effective Hamiltonians, when used in tandem with statistical mechanics techniques, offer a rigorous connection between 0 Kelvin ab-initio predictions and finite temperature experimental observations. For alloys, cluster expansion Hamiltonians can coarse-grain out the complex, many-body electron problem of density functional theory, yielding a series of simple site-wise basis functions (e.g., produ… ▽ More Effective Hamiltonians, when used in tandem with statistical mechanics techniques, offer a rigorous connection between 0 Kelvin ab-initio predictions and finite temperature experimental observations. For alloys, cluster expansion Hamiltonians can coarse-grain out the complex, many-body electron problem of density functional theory, yielding a series of simple site-wise basis functions (e.g., products of site occupancy variables) on an atomic scale. The resulting energy polynomial is computationally inexpensive, and hence suitable for the (tens of) thousands of calculations of large systems required by stochastic methods. We present a new method to run the statical mechanics problem "in reverse", using high-temperature observations and thermodynamic connections to construct an effective Hamiltonian and thereby predict the 0 Kelvin energy spectrum and associated ground states. By re-examining the cluster expansion formalism through the lens of entropy-maximization approaches, we develop an algorithm to select clusters and determine cluster interactions using only a few, high-temperature experiments on disordered phases. We demonstrate that our approach can recover not only the stable ground states at 0 Kelvin, but also the full phase behavior for three realistic two-dimensional and three-dimensional alloy test-cases. △ Less

Submitted 22 September, 2016; originally announced September 2016.

Comments: 14 pages, 10 figures, 3 appendices

A comparison of Redlich-Kister polynomial and cubic spline representations of the chemical potential in phase field computations

Authors: Gregory H. Teichert, N. S. Harsha Gunda, Shiva Rudraraju, Anirudh Raju Natarajan, Brian Puchala, Krishna Garikipati, Anton Van der Ven

Abstract: Free energies play a central role in many descriptions of equilibrium and non-equilibrium properties of solids. Continuum partial differential equations (PDEs) of atomic transport, phase transformations and mechanics often rely on first and second derivatives of a free energy function. The stability, accuracy and robustness of numerical methods to solve these PDEs are sensitive to the particular f… ▽ More Free energies play a central role in many descriptions of equilibrium and non-equilibrium properties of solids. Continuum partial differential equations (PDEs) of atomic transport, phase transformations and mechanics often rely on first and second derivatives of a free energy function. The stability, accuracy and robustness of numerical methods to solve these PDEs are sensitive to the particular functional representations of the free energy. In this communication we investigate the influence of different representations of thermodynamic data on phase field computations of diffusion and two-phase reactions in the solid state. First-principles statistical mechanics methods were used to generate realistic free energy data for HCP titanium with interstitially dissolved oxygen. While Redlich-Kister polynomials have formed the mainstay of thermodynamic descriptions of multi-component solids, they require high order terms to fit oscillations in chemical potentials around phase transitions. Here we demonstrate that high fidelity fits to rapidly fluctuating free energy functions are obtained with spline functions. Spline functions that are many degrees lower than Redlich-Kister polynomials provide equal or superior fits to chemical potential data and, when used in phase field computations, result in solution times approaching an order of magnitude speed up relative to the use of Redlich-Kister polynomials. △ Less

Submitted 18 November, 2016; v1 submitted 31 August, 2016; originally announced September 2016.

Mechano-chemical spinodal decomposition: A phenomenological theory of phase transformations in multi-component, crystalline solids

Authors: Shiva Rudraraju, Anton Van der Ven, Krishna Garikipati

Abstract: We present a phenomenological treatment of diffusion-driven martensitic phase transformations in multi-component crystalline solids that arise from non-convex free energies in mechanical and chemical variables. The treatment describes diffusional phase transformations that are accompanied by symmetry breaking structural changes of the crystal unit cell and reveals the importance of a mechano-chemi… ▽ More We present a phenomenological treatment of diffusion-driven martensitic phase transformations in multi-component crystalline solids that arise from non-convex free energies in mechanical and chemical variables. The treatment describes diffusional phase transformations that are accompanied by symmetry breaking structural changes of the crystal unit cell and reveals the importance of a mechano-chemical spinodal, defined as the region in strain-composition space where the free energy density function is non-convex. The approach is relevant to phase transformations wherein the structural order parameters can be expressed as linear combinations of strains relative to a high-symmetry reference crystal. The governing equations describing mechano-chemical spinodal decomposition are variationally derived from a free energy density function that accounts for interfacial energy via gradients of the rapidly varying strain and composition fields. A robust computational framework for treating the coupled, higher order diffusion and nonlinear strain gradient elasticity problems is presented. Because the local strains in an inhomogeneous, transforming microstructure can be finite, the elasticity problem must account for geometric nonlinearity. An evaluation of available experimental phase diagrams and first-principles free energies suggests mechano-chemical spinodal decomposition should occur in metal hydrides such as ZrH$_{2-2c}$. The rich physics that ensues is explored in several numerical examples in two and three dimensions and the relevance of the mechanism is discussed in the context of important electrode materials for Li-ion batteries and high temperature ceramics. △ Less

Submitted 27 September, 2016; v1 submitted 21 August, 2015; originally announced August 2015.

Comments: Published in Nature npj Computational Materials. Movies listed in the supplementary information available in the "Supplementary Information" section under: http://www.nature.com/articles/npjcompumats201612

Journal ref: Nature npj Computational Materials 2, Article number: 16012 (2016)

Testing Predictions from Density Functional Theory at Finite Temperatures: $β_2$-Like Ground States in Co-Pt

Authors: Elizabeth Decolvenaere, Michael J. Gordon, Anton Van der Ven

Abstract: We perform a critical assessment of the accuracy of DFT-based methods in predicting stable phases within the Co-Pt binary alloy. Statistical mechanical analysis applied to zero kelvin DFT predictions yields finite-temperature results that can be directly compared with experimental measurements. The predicted temperature-composition phase diagram is qualitatively incompatible with experimental obse… ▽ More We perform a critical assessment of the accuracy of DFT-based methods in predicting stable phases within the Co-Pt binary alloy. Statistical mechanical analysis applied to zero kelvin DFT predictions yields finite-temperature results that can be directly compared with experimental measurements. The predicted temperature-composition phase diagram is qualitatively incompatible with experimental observations, indicating that the predicted stability of long-period superstructures as ground states in the Co-Pt binary is incorrect. We also show that recently suggested methods to better align DFT and experiment via the hybrid functional HSE06 are unable to resolve the discrepancies in this system. Our results indicate a need for better verification of DFT based phase stability predictions, and highlight fundamental flaws in the ability of DFT to treat late 3$d$-5$d$ binary alloys. △ Less

Submitted 11 August, 2015; originally announced August 2015.

Comments: 7 Pages, 3 Figures, Supplemental PDF included

Journal ref: Phys. Rev. B 92, 085119 (2015)

Lithium Diffusion in Graphitic Carbon

Authors: Kristin Persson, Vijay A. Sethuraman, Laurence J. Hardwick, Yoyo Hinuma, Ying Shirley Meng, Anton van der Ven, Venkat Srinivasan, Robert Kostecki, Gerbrand Ceder

Abstract: Graphitic carbon is currently considered the state-of-the-art material for the negative electrode in lithium-ion cells, mainly due to its high reversibility and low operating potential. However, carbon anodes exhibit mediocre charge/discharge rate performance, which contributes to severe transport-induced surface-structural damage upon prolonged cycling, and limits the lifetime of the cell. Lithiu… ▽ More Graphitic carbon is currently considered the state-of-the-art material for the negative electrode in lithium-ion cells, mainly due to its high reversibility and low operating potential. However, carbon anodes exhibit mediocre charge/discharge rate performance, which contributes to severe transport-induced surface-structural damage upon prolonged cycling, and limits the lifetime of the cell. Lithium bulk diffusion in graphitic carbon is not yet completely understood, partly due to the complexity of measuring bulk transport properties in finite-sized, non-isotropic particles. To solve this problem for graphite, we use the Devanathan-Stachurski electrochemical methodology combined with ab-initio computations to deconvolute, and quantify the mechanism of lithium-ion diffusion in highly oriented pyrolytic graphite (HOPG). The results reveal inherent high lithium-ion diffusivity in the direction parallel to the graphene plane (ca. 10^-7 - 10^-6 cm2 s-1), as compared to sluggish lithium-ion transport along grain boundaries (ca. 10^-11 cm^2 s^-1), indicating the possibility of rational design of carbonaceous materials and composite electrodes with very high rate capability. △ Less

Submitted 2 August, 2011; originally announced August 2011.

Comments: 9 pages, 3 figures

Journal ref: Journal of Physical Chemistry Letters, 1(8), 1176-1180, 2010