-
Direct Fabrication of Atomically Defined Pores in MXenes
Authors:
Matthew G. Boebinger,
Dundar E. Yilmaz,
Ayana Ghosh,
Sudhajit Misra,
Tyler S. Mathis,
Sergei V. Kalinin,
Stephen Jesse,
Yury Gogotsi,
Adri C. T. van Duin,
Raymond R. Unocic
Abstract:
Controlled fabrication of nanopores in atomically thin two-dimensional material offers the means to create robust membranes needed for ion transport, nanofiltration, and DNA sensing. Techniques for creating nanopores have relied upon either plasma etching or direct irradiation using electrons or ions; however, aberration-corrected scanning transmission electron microscopy (STEM) offers the advanta…
▽ More
Controlled fabrication of nanopores in atomically thin two-dimensional material offers the means to create robust membranes needed for ion transport, nanofiltration, and DNA sensing. Techniques for creating nanopores have relied upon either plasma etching or direct irradiation using electrons or ions; however, aberration-corrected scanning transmission electron microscopy (STEM) offers the advantage of combining a highly energetic, sub-angstrom sized electron beam for atomic manipulation along with atomic resolution imaging. Here, we utilize a method for automated nanopore fabrication with real-time atomic visualization to enhance our mechanistic understanding of beam-induced transformations. Additionally, an electron beam simulation technique, Electron-Beam Simulator (E-BeamSim) was developed to observe the atomic movements and interactions resulting from electron beam irradiation. Using the 2D MXene Ti3C2Tx, we explore the influence of temperature on nanopore fabrication by tracking atomic transformation pathways and find that at room temperature, electron beam irradiation induces random displacement of atoms and results in a pileup of titanium atoms at the nanopore edge. This pileup was confirmed and demonstrated in E-BeamSim simulations around the small, milled area in the MXene monolayer. At elevated temperatures, the surface functional groups on MXene are effectively removed, and the mobility of atoms increases, which results in atomic transformations that lead to the selective removal of atoms layer by layer. Through controllable manufacture using e-beam milling fabrication, the production and then characterization of the fabricated defects can be better understood for future work. This work can lead to the development of defect engineering techniques within functionalized MXene layers.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
When the atoms dance: exploring mechanisms of electron-beam induced modifications of materials with machine-learning assisted high temporal resolution electron microscopy
Authors:
Matthew G. Boebinger,
Ayana Ghosh,
Kevin M. Roccapriore,
Sudhajit Misra,
Kai Xiao,
Stephen Jesse,
Maxim Ziatdinov,
Sergei V. Kalinin,
Raymond R. Unocic
Abstract:
Directed atomic fabrication using an aberration-corrected scanning transmission electron microscope (STEM) opens new pathways for atomic engineering of functional materials. In this approach, the electron beam is used to actively alter the atomic structure through electron beam induced irradiation processes. One of the impediments that has limited widespread use thus far has been the ability to un…
▽ More
Directed atomic fabrication using an aberration-corrected scanning transmission electron microscope (STEM) opens new pathways for atomic engineering of functional materials. In this approach, the electron beam is used to actively alter the atomic structure through electron beam induced irradiation processes. One of the impediments that has limited widespread use thus far has been the ability to understand the fundamental mechanisms of atomic transformation pathways at high spatiotemporal resolution. Here, we develop a workflow for obtaining and analyzing high-speed spiral scan STEM data, up to 100 fps, to track the atomic fabrication process during nanopore milling in monolayer MoS2. An automated feedback-controlled electron beam positioning system combined with deep convolution neural network (DCNN) was used to decipher fast but low signal-to-noise datasets and classify time-resolved atom positions and nature of their evolving atomic defect configurations. Through this automated decoding, the initial atomic disordering and reordering processes leading to nanopore formation was able to be studied across various timescales. Using these experimental workflows a greater degree of speed and information can be extracted from small datasets without compromising spatial resolution. This approach can be adapted to other 2D materials systems to gain further insights into the defect formation necessary to inform future automated fabrication techniques utilizing the STEM electron beam.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
A High-Performance Quasi-1D MoS$_2$ Nanoribbon Photodetector
Authors:
Ganesh Ghimire,
Rajesh Kumar Ulaganathan,
Agnes Tempez,
Oleksii Ilchenko,
Raymond R. Unocic,
Julian Heske,
Denys I. Miakota,
Cheng Xiang,
Marc Chaigneau,
Tim Booth,
Peter Bøggild,
Kristian S. Thygesen,
David B. Geohegan,
Stela Canulescu
Abstract:
Molybdenum disulfide (MoS$_2$) nanoribbons have attracted increased interest due to their properties which can be tailored by tuning their dimensions. Herein, we demonstrate the growth of highly crystalline quasi-one-dimensional (1D)MoS$_2$ nanoribbons and aligned 3D triangular crystals with predominantly 3R or 2H stacking orientation. The synthesis method relies on the reaction between an ultra-t…
▽ More
Molybdenum disulfide (MoS$_2$) nanoribbons have attracted increased interest due to their properties which can be tailored by tuning their dimensions. Herein, we demonstrate the growth of highly crystalline quasi-one-dimensional (1D)MoS$_2$ nanoribbons and aligned 3D triangular crystals with predominantly 3R or 2H stacking orientation. The synthesis method relies on the reaction between an ultra-thin MoO3-x film grown by Pulsed Laser Deposition (PLD) and NaF in a sulfur-rich environment. The quasi-1D MoS$_2$ nanoribbons can reach several micrometres in length, and feature single-layer (1L) edges aligned with the nanoribbon core, thereby forming a 1L-multilayer (ML) homojunction due to abrupt discontinuity in thickness. The 1L edges of the nanostructures show a pronounced second harmonic generation (SHG) due to the symmetry breaking, in contrast to the centrosymmetric ML structure, which is unsusceptible to the second-order nonlinear process. A pronounced splitting of the Raman spectra was observed in quasi-1D MoS$_2$ nanoribbons arising from distinct contributions from the 2D edges and a multilayer core. Nanoscale imaging reveals the blue-shifted exciton emission of the monolayer nanoribbon compared to the triangular MoS$_2$ counterpart due to built-in local strain and disorder. We further report on a versatile and ultrasensitive photodetector made of a single quasi-1D MoS$_2$ nanoribbon with a maximum responsivity of 872 A/W at the wavelength of 532 nm. The optoelectronic performance of the MoS$_2$ nanoribbon is superior to the previously reported single-nanoribbon photodetectors. Our findings can inspire the design of TMD semiconductors with tunable geometries for efficient optoelectronic devices.
△ Less
Submitted 2 April, 2023;
originally announced April 2023.
-
Probing electron beam induced transformations on a single defect level via automated scanning transmission electron microscopy
Authors:
Kevin M. Roccapriore,
Matthew G. Boebinger,
Ondrej Dyck,
Ayana Ghosh,
Raymond R. Unocic,
Sergei V. Kalinin,
Maxim Ziatdinov
Abstract:
The robust approach for real-time analysis of the scanning transmission electron microscopy (STEM) data streams, based on the ensemble learning and iterative training (ELIT) of deep convolutional neural networks, is implemented on an operational microscope, enabling the exploration of the dynamics of specific atomic configurations under electron beam irradiation via an automated experiment in STEM…
▽ More
The robust approach for real-time analysis of the scanning transmission electron microscopy (STEM) data streams, based on the ensemble learning and iterative training (ELIT) of deep convolutional neural networks, is implemented on an operational microscope, enabling the exploration of the dynamics of specific atomic configurations under electron beam irradiation via an automated experiment in STEM. Combined with beam control, this approach allows studying beam effects on selected atomic groups and chemical bonds in a fully automated mode. Here, we demonstrate atomically precise engineering of single vacancy lines in transition metal dichalcogenides and the creation and identification of topological defects graphene. The ELIT-based approach opens the pathway toward the direct on-the-fly analysis of the STEM data and engendering real-time feedback schemes for probing electron beam chemistry, atomic manipulation, and atom by atom assembly.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Effective reduction of PdCoO2 thin films via hydrogenation and sign tunable anomalous Hall effect
Authors:
Gaurab Rimal,
Yiting Liu,
Caleb Schmidt,
Hussein Hijazi,
Elizabeth Skoropata,
Jason Lapano,
Debangshu Mukherjee,
Raymond R. Unocic,
Matthew F. Chisholm,
Yifei Sun,
Haoming Yu,
Cheng-Jun Sun,
Hua Zhou,
Matthew Brahlek,
Leonard C. Feldman,
Shriram Ramanathan,
Seongshik Oh
Abstract:
PdCoO2 , belonging to a family of triangular oxides called delafossite, is one of the most conducting oxides. Its in-plane conductivity is comparable to those of the best metals, and exhibits hydrodynamic electronic transport with extremely long mean free path at cryogenic temperatures. Nonetheless, it is nonmagnetic despite the presence of the cobalt ion. Here, we show that a mild hydrogenation p…
▽ More
PdCoO2 , belonging to a family of triangular oxides called delafossite, is one of the most conducting oxides. Its in-plane conductivity is comparable to those of the best metals, and exhibits hydrodynamic electronic transport with extremely long mean free path at cryogenic temperatures. Nonetheless, it is nonmagnetic despite the presence of the cobalt ion. Here, we show that a mild hydrogenation process reduces PdCoO2 thin films to an atomically-mixed alloy of PdCo with strong out-of-plane ferromagnetism and sign-tunable anomalous Hall effect. Considering that many other compounds remain little affected under a similar hydrogenation condition, this discovery may provide a route to creating novel spintronic heterostructures combining strong ferromagnetism, involving oxides and other functional materials.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Fluid Guided CVD Growth for Large-scale Monolayer Two-dimensional Materials
Authors:
Dong Zhou,
Ji Lang,
Nicholas Yoob,
Raymond R. Unocic,
Qianhong Wu,
Bo Li
Abstract:
Atmospheric pressure chemical vapor deposition (APCVD) has been used extensively for synthesizing two-dimensional (2D) materials, due to its low cost and promise for high-quality monolayer crystal synthesis. However, the understanding of the reaction mechanism and the key parameters affecting the APCVD processes is still in its embryonic stage. Hence, the scalability of the APCVD method in achievi…
▽ More
Atmospheric pressure chemical vapor deposition (APCVD) has been used extensively for synthesizing two-dimensional (2D) materials, due to its low cost and promise for high-quality monolayer crystal synthesis. However, the understanding of the reaction mechanism and the key parameters affecting the APCVD processes is still in its embryonic stage. Hence, the scalability of the APCVD method in achieving large scale continuous film remains very poor. Here, we use MoSe2 as a model system and present a fluid guided growth strategy for understanding and controlling the growth of 2D materials. Through the integration of experiment and computational fluid dynamics (CFD) analysis in the full-reactor scale, we identified three key parameters: precursor mixing, fluid velocity and shear stress, which play a critical role in the APCVD process. By modifying the geometry of the growth setup, to enhance precursor mixing and decrease nearby velocity shear rate and adjusting flow direction, we have successfully obtained inch-scale monolayer MoSe2. This unprecedented success of achieving scalable 2D materials through fluidic design lays the foundation for designing new CVD systems to achieve the scalable synthesis of nanomaterials.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Lattice strain measurement of core@shell electrocatalysts with 4D-STEM nanobeam electron diffraction
Authors:
Debangshu Mukherjee,
Jocelyn T. L. Gamler,
Sara E. Skrabalak,
Raymond R. Unocic
Abstract:
Strain engineering enables the direct modification of the atomic bonding and is currently an active area of research aimed at improving the electrocatalytic activity. However, directly measuring the lattice strain of individual catalyst nanoparticles is challenging, especially at the scale of a single unit cell. Here, we quantitatively map the strain present in rhodium@platinum (core@shell) nanocu…
▽ More
Strain engineering enables the direct modification of the atomic bonding and is currently an active area of research aimed at improving the electrocatalytic activity. However, directly measuring the lattice strain of individual catalyst nanoparticles is challenging, especially at the scale of a single unit cell. Here, we quantitatively map the strain present in rhodium@platinum (core@shell) nanocube electrocatalysts using conventional aberration-corrected scanning transmission electron microscopy (STEM) and the recently developed technique of 4D-STEM nanobeam electron diffraction. We demonstrate that 4D-STEM combined with data pre-conditioning allows for quantitative lattice strain map** with sub-picometer precision without the influence of scan distortions. When combined with multivariate curve resolution, 4D-STEM allows us to distinguish the nanocube core from the shell and to quantify the unit cell size as a function of distance from the core-shell interface. Our results demonstrate that 4D-STEM has significant precision and accuracy advantages in strain metrology of catalyst materials compared to aberration-corrected STEM imaging and is beneficial for extracting information about the evolution of strain in catalyst nanoparticles.
△ Less
Submitted 8 April, 2020; v1 submitted 3 January, 2020;
originally announced January 2020.
-
Growth of metallic delafossite PdCoO2 by molecular beam epitaxy
Authors:
Matthew Brahlek,
Gaurab Rimal,
Jong Mok Ok,
Debangshu Mukherjee,
Alessandro R. Mazza,
Qiyang Lu,
Ho Nyung Lee,
T. Zac Ward,
Raymond R. Unocic,
Gyula Eres,
Seongshik Oh
Abstract:
The Pd, and Pt based ABO2 delafossites are a unique class of layered, triangular oxides with 2D electronic structure and a large conductivity that rivals the noble metals. Here, we report successful growth of the metallic delafossite PdCoO2 by molecular beam epitaxy (MBE). The key challenge is controlling the oxidation of Pd in the MBE environment where phase-segregation is driven by the reduction…
▽ More
The Pd, and Pt based ABO2 delafossites are a unique class of layered, triangular oxides with 2D electronic structure and a large conductivity that rivals the noble metals. Here, we report successful growth of the metallic delafossite PdCoO2 by molecular beam epitaxy (MBE). The key challenge is controlling the oxidation of Pd in the MBE environment where phase-segregation is driven by the reduction of PdCoO2 to cobalt oxide and metallic palladium. This is overcome by combining low temperature (300 °C) atomic layer-by-layer MBE growth in the presence of reactive atomic oxygen with a post-growth high-temperature anneal. Thickness dependence (5-265 nm) reveals that in the thin regime (<75 nm), the resistivity scales inversely with thickness, likely dominated by surface scattering; for thicker films the resistivity approaches the values reported for the best bulk-crystals at room temperature, but the low temperature resistivity is limited by structural twins. This work shows that the combination of MBE growth and a post-growth anneal provides a route to creating high quality films in this interesting family of layered, triangular oxides.
△ Less
Submitted 15 July, 2019; v1 submitted 29 May, 2019;
originally announced May 2019.
-
Deep Learning of Atomically Resolved Scanning Transmission Electron Microscopy Images: Chemical Identification and Tracking Local Transformations
Authors:
Maxim Ziatdinov,
Ondrej Dyck,
Artem Maksov,
Xufan Li,
Xiahan Sang,
Kai Xiao,
Raymond R. Unocic,
Rama Vasudevan,
Stephen Jesse,
Sergei V. Kalinin
Abstract:
Recent advances in scanning transmission electron and scanning probe microscopies have opened exciting opportunities in probing the materials structural parameters and various functional properties in real space with angstrom-level precision. This progress has been accompanied by an exponential increase in the size and quality of datasets produced by microscopic and spectroscopic experimental tech…
▽ More
Recent advances in scanning transmission electron and scanning probe microscopies have opened exciting opportunities in probing the materials structural parameters and various functional properties in real space with angstrom-level precision. This progress has been accompanied by an exponential increase in the size and quality of datasets produced by microscopic and spectroscopic experimental techniques. These developments necessitate adequate methods for extracting relevant physical and chemical information from the large datasets, for which a priori information on the structures of various atomic configurations and lattice defects is limited or absent. Here we demonstrate an application of deep neural networks to extract information from atomically resolved images including location of the atomic species and type of defects. We develop a 'weakly-supervised' approach that uses information on the coordinates of all atomic species in the image, extracted via a deep neural network, to identify a rich variety of defects that are not part of an initial training set. We further apply our approach to interpret complex atomic and defect transformation, including switching between different coordination of silicon dopants in graphene as a function of time, formation of peculiar silicon dimer with mixed 3-fold and 4-fold coordination, and the motion of molecular 'rotor'. This deep learning based approach resembles logic of a human operator, but can be scaled leading to significant shift in the way of extracting and analyzing information from raw experimental data.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.
-
Engineering the thermal conductivity along an individual silicon nanowire by selective helium ion irradiation
Authors:
Yunshan Zhao,
Dan Liu,
Jie Chen,
Liyan Zhu,
Alex Belianinov,
Olga S. Ovchinnikova,
Raymond R. Unocic,
Matthew J. Burch,
Songkil Kim,
Hanfang Hao,
Daniel S Pickard,
Baowen Li,
John T L Thong
Abstract:
The ability to engineer the thermal conductivity of materials allows us to control the flow of heat and derive novel functionalities such as thermal rectification, thermal switching, and thermal cloaking. While this could be achieved by making use of composites and metamaterials at bulk scales, engineering the thermal conductivity at micro- and nano-scale dimensions is considerably more challengin…
▽ More
The ability to engineer the thermal conductivity of materials allows us to control the flow of heat and derive novel functionalities such as thermal rectification, thermal switching, and thermal cloaking. While this could be achieved by making use of composites and metamaterials at bulk scales, engineering the thermal conductivity at micro- and nano-scale dimensions is considerably more challenging. In this work we show that the local thermal conductivity along a single Si nanowire can be tuned to a desired value (between crystalline and amorphous limits) with high spatial resolution through selective helium ion irradiation with a well-controlled dose. The underlying mechanism is understood through molecular dynamics simulations and quantitative phonon-defect scattering rate analysis, where the behavior of thermal conductivity with dose is attributed to the accumulation and agglomeration of scattering centers at lower doses. Beyond a threshold dose, a crystalline-amorphous transition was observed.
△ Less
Submitted 18 May, 2017;
originally announced May 2017.
-
Aqueous Proton Transfer Across Single Layer Graphene
Authors:
Jennifer L. Achtyl,
Raymond R. Unocic,
Lijun Xu,
Yu Cai,
Muralikrishna Raju,
Weiwei Zhang,
Robert L. Sacci,
Ivan V. Vlassiouk,
Pasquale F. Fulvio,
Panchapakesan Ganesh,
David J. Wesolowski,
Sheng Dai,
Adri C. T. van Duin,
Matthew Neurock,
Franz M. Geiger
Abstract:
Proton transfer across single layer graphene is associated with large computed energy barriers and is therefore thought to be unfavorable at room temperature unless nanoscale holes or dopants are introduced, or a potential bias is applied. Here, we subject single layer graphene supported on fused silica to cycles of high and low pH and show that protons transfer reversibly from the aqueous phase t…
▽ More
Proton transfer across single layer graphene is associated with large computed energy barriers and is therefore thought to be unfavorable at room temperature unless nanoscale holes or dopants are introduced, or a potential bias is applied. Here, we subject single layer graphene supported on fused silica to cycles of high and low pH and show that protons transfer reversibly from the aqueous phase through the graphene to the other side where they undergo acid-base chemistry with the silica hydroxyl groups. After ruling out diffusion through macroscopic pinholes, the protons are found to transfer through rare, naturally occurring atomic defects. Computer simulations reveal low energy barriers of 0.68 to 0.75 eV for aqueous proton transfer across hydroxyl-terminated atomic defects that participate in a Grotthuss-type relay, while pyrylium-like ether terminations shut down proton exchange. Unfavorable energy barriers to helium and hydrogen transfer indicate the transfer process is selective for aqueous protons.
△ Less
Submitted 30 January, 2015; v1 submitted 4 November, 2014;
originally announced November 2014.