Showing 1–50 of 56 results for author: Tian, F

Impact of the Top SiO2 Interlayer Thickness on Memory Window of Si Channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) Gate Structure

Authors: Tao Hu, Xianzhou Shao, Mingkai Bai, Xinpei Jia, Saifei Dai, Xiaoqing Sun, Runhao Han, Jia Yang, Xiaoyu Ke, Fengbin Tian, Shuai Yang, Junshuai Chai, Hao Xu, Xiaolei Wang, Wenwu Wang, Tianchun Ye

Abstract: We study the impact of top SiO2 interlayer thickness on the memory window (MW) of Si channel ferroelectric field-effect transistor (FeFET) with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. We find that the MW increases with the increasing thickness of the top SiO2 interlayer, and such an increase exhibits a two-stage linear dependence. The physical origin is the presence of the different… ▽ More We study the impact of top SiO2 interlayer thickness on the memory window (MW) of Si channel ferroelectric field-effect transistor (FeFET) with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. We find that the MW increases with the increasing thickness of the top SiO2 interlayer, and such an increase exhibits a two-stage linear dependence. The physical origin is the presence of the different interfacial charges trapped at the top SiO2/Hf0.5Zr0.5O2 interface. Moreover, we investigate the dependence of endurance characteristics on initial MW. We find that the endurance characteristic degrades with increasing the initial MW. By inserting a 3.4 nm SiO2 dielectric interlayer between the gate metal TiN and the ferroelectric Hf0.5Zr0.5O2, we achieve a MW of 6.3 V and retention over 10 years. Our work is helpful in the device design of FeFET. △ Less

Submitted 16 June, 2024; originally announced June 2024.

Comments: 6 pages, 12 figures. arXiv admin note: substantial text overlap with arXiv:2404.15825

Van der Waals Magnetic Electrode Transfer for Two-Dimensional Spintronic Devices

Authors: Zhongzhong Luo, Zhihao Yu, Xiangqian Lu, Wei Niu, Yao Yu, Yu Yao, Fuguo Tian, Chee Leong Tan, Huabin Sun, Li Gao, Wei Qin, Yong Xu, Qiang Zhao, Xiang-Xiang Song

Abstract: Two-dimensional (2D) materials are promising candidates for spintronic applications. Maintaining their atomically smooth interfaces during integration of ferromagnetic (FM) electrodes is crucial since conventional metal deposition tends to induce defects at the interfaces. Meanwhile, the difficulties in picking up FM metals with strong adhesion and in achieving conductance match between FM electro… ▽ More Two-dimensional (2D) materials are promising candidates for spintronic applications. Maintaining their atomically smooth interfaces during integration of ferromagnetic (FM) electrodes is crucial since conventional metal deposition tends to induce defects at the interfaces. Meanwhile, the difficulties in picking up FM metals with strong adhesion and in achieving conductance match between FM electrodes and spin transport channels make it challenging to fabricate high-quality 2D spintronic devices using metal transfer techniques. Here, we report a solvent-free magnetic electrode transfer technique that employs a graphene layer to assist in the transfer of FM metals. It also serves as part of the FM electrode after transfer for optimizing spin injection, which enables the realization of spin valves with excellent performance based on various 2D materials. In addition to two-terminal devices, we demonstrate that the technique is applicable for four-terminal spin valves with nonlocal geometry. Our results provide a promising future of realizing 2D spintronic applications using the developed magnetic electrode transfer technique. △ Less

Submitted 11 May, 2024; originally announced May 2024.

Journal ref: Nano Lett. (2024)

Significantly Enhanced Vacancy Diffusion in Mn-containing Alloys

Authors: Huaqing Guan, Hanwen Cui, Ning Ding, Kuo Yang, Siqi Jiang, Yanfei Sui, Yuanyuan Wang, Fuyang Tian, Zhe Li, Shuai Wang, Pengfei Zheng, Chenyang Lu, Qiu Xu, Levente Vitos, Shaosong Huang

Abstract: Manipulating point defects for tailored macroscopic properties remains a formidable challenge in materials science. This study demonstrates a proof-of-principle for a universal law involving element Mn, significantly enhancing vacancy diffusion through an unprecedented anomalous Friedel Oscillations phenomenon, across most metals in the periodic table. The correlation between Mn-induced point-defe… ▽ More Manipulating point defects for tailored macroscopic properties remains a formidable challenge in materials science. This study demonstrates a proof-of-principle for a universal law involving element Mn, significantly enhancing vacancy diffusion through an unprecedented anomalous Friedel Oscillations phenomenon, across most metals in the periodic table. The correlation between Mn-induced point-defect dynamic changes and intrinsic macro-properties is robustly validated through the first-principles theory and well-designed experiments. The physical origin stems from Mn's exceptionally large effective intra-elemental 3d electron interactions, surpassing the Coulomb attraction induced by vacancy and disrupting the electron screening effect. Given the ubiquitous nature of vacancies and their recognition as the most crucial defects influencing nearly all physical and mechanical properties of crystalline materials, this outcome may drive advances in a broad domain. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Room-temperature intrinsic ferromagnetism of two-dimensional Na2Cl crystals originated by s- and p-orbitals

Authors: Yimin Zhao, Yunzhang Li, Liang Chen, Quan Zhang, Xing Liu, Yizhou Yang, Ruobing Yi, Lihao Zhang, Zhenglin He, Yinwei Qiu, Dexi Nie, Fanghua Tian, Zhe Wang, Zhiwei Yang, Lei Zhang, Guosheng Shi, Shengli Zhang, Hai** Fang

Abstract: Ferromagnetism, as one of the most valuable properties of materials, has attracted sustained and widespread interest in basic and applied research from ancient compasses to modern electronic devices. Traditionally, intrinsic ferromagnetism has been attributed to the permanent magnetic moment induced by partially filled d- or f-orbitals. However, the development of ferromagnetic materials has been… ▽ More Ferromagnetism, as one of the most valuable properties of materials, has attracted sustained and widespread interest in basic and applied research from ancient compasses to modern electronic devices. Traditionally, intrinsic ferromagnetism has been attributed to the permanent magnetic moment induced by partially filled d- or f-orbitals. However, the development of ferromagnetic materials has been limited by this electronic structure convention. Thus, the identification of additional materials that are not constrained by this conventional rule but also exhibit intrinsic ferromagnetism is highly expected and may impact all the fields based on ferromagnetism. Here, we report the direct observation of room-temperature intrinsic ferromagnetism in two-dimensional (2D) Na2Cl crystals, in which there are only partially filled s- and p-orbitals rather than d- or f-orbitals, using the superconducting quantum interference device (SQUID) and magnetic force microscope (MFM). These Na2Cl crystals formed in reduced graphene oxide (rGO) membranes have an unconventional stoichiometric structure leading to unique electron and spin distributions. And the structure of these 2D Na2Cl crystals, including the Na and Cl sites, is characterized in situ for the first time and directly observed by cryo-electron microscopy (cryo-EM) based on the observed difference in contrast between Na stacked with Cl and single Na. These findings break the conventional rule of intrinsic ferromagnetism and provide new insights into the design of novel magnetic and electronic devices and transistors with a size down to the atomic scale. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Nonlinearity tunes crack dynamics in soft materials

Authors: Fucheng Tian, Jian ** Gong

Abstract: Cracks in soft materials exhibit diverse dynamic patterns, involving straight, oscillation, branching, and supershear fracture. Here, we successfully reproduce these crack morphologies in a two-dimensional pre-strained fracture scenario and establish crack stability phase diagrams for three distinct nonlinear materials using a fracture phase field model. The contrasting phase diagrams highlight th… ▽ More Cracks in soft materials exhibit diverse dynamic patterns, involving straight, oscillation, branching, and supershear fracture. Here, we successfully reproduce these crack morphologies in a two-dimensional pre-strained fracture scenario and establish crack stability phase diagrams for three distinct nonlinear materials using a fracture phase field model. The contrasting phase diagrams highlight the crucial role of nonlinearity in regulating crack dynamics. In strain-softening materials, crack branching prevails, limiting the cracks to sub-Rayleigh states. Yet strain-stiffening stabilizes crack propagation, allowing for the presence of supershear fracture. Of particular interest is the large-strain linear elastic materials, where crack oscillation is readily triggered. The onset speed of such instability scales linearly with the characteristic wave speed near the crack tip, supporting the notion that such crack oscillations are a universal instability closely tied to the wave speed. The oscillation wavelength is shown to be a bilinear function of the nonlinear scale and crack driving force, with a minimum length scale associated with the dissipative zone. Moreover, our findings suggest that the increase in characteristic wave speed due to strain-stiffening can account for the observed transition of cracks from sub-Rayleigh to supershear regimes. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Comments: 12 pages,4 figures

Idealizing Tauc Plot for Accurate Bandgap Determination of Semiconductor with UV-Vis: A Case Study for Cubic Boron Arsenide

Authors: Hong Zhong, Fengjiao Pan, Shuai Yue, Chengzhen Qin, Viktor Hadjiev, Fei Tian, Xinfeng Liu, Feng Lin, Zhiming Wang, Zhifeng Ren, Jiming Bao

Abstract: The Tauc plot method is widely used to determine the bandgap of semiconductors via UV-visible optical spectroscopy due to its simplicity and perceived accuracy. However, the actual Tauc plot often exhibits significant baseline absorption below the expected bandgap, leading to discrepancies in the calculated bandgap depending on whether the linear fit is extrapolated to zero or non-zero baseline. I… ▽ More The Tauc plot method is widely used to determine the bandgap of semiconductors via UV-visible optical spectroscopy due to its simplicity and perceived accuracy. However, the actual Tauc plot often exhibits significant baseline absorption below the expected bandgap, leading to discrepancies in the calculated bandgap depending on whether the linear fit is extrapolated to zero or non-zero baseline. In this study, we show that both extrapolation methods can produce significant errors by simulating Tauc plots with varying levels of baseline absorption. To address this issue, we propose a new method that involves idealizing the absorption spectrum by removing its baseline before constructing the Tauc plot. Experimental verification of this method using a gallium phosphide (GaP) wafer with intentionally introduced baseline absorptions shows promising results. Furthermore, we apply this new method to cubic boron arsenide (c-BAs) and resolve discrepancies in c-BAs bandgap values reported by different groups, obtaining a converging bandgap of 1.835 eV based on both previous and new transmission spectra. The method is applicable to both indirect and direct bandgap semiconductors, regardless of whether the absorption spectrum is measured via transmission or diffuse reflectance, will become essential to obtain accurate values of their bandgaps. △ Less

Submitted 12 June, 2023; originally announced July 2023.

Build a Ruler to Measure Electron Localization Function with Machine Learning Models: S-Au bonds Quantification in Thiolate Protected Gold Nanoclusters

Authors: Xinxu Zhang, Hui Jia, Fangzhen Tian, Yandi Liu, Ullrich Carsten, Yulong Wu, Changlong Liu, Xiaodong Zhang, Yonghui Li

Abstract: Complicated S-Au interaction patterns in thiolate-protected gold nanoclusters (TP-AuNCs) are important in the formation of versatility among clusters. In this study, the ELFnet, a novel convolutional neural network (CNN) model is trained and tested to bridge the electron localization function (ELF) images and the bond lengths. As believed to be a successful bond describer, a dataset of 3959 ELF im… ▽ More Complicated S-Au interaction patterns in thiolate-protected gold nanoclusters (TP-AuNCs) are important in the formation of versatility among clusters. In this study, the ELFnet, a novel convolutional neural network (CNN) model is trained and tested to bridge the electron localization function (ELF) images and the bond lengths. As believed to be a successful bond describer, a dataset of 3959 ELF images is obtained out of Density Functional Theory (DFT) simulations, followed by a series of model architecture and hyperparameter exploration. The ELFnet with its best performance shows its correct feature extraction ability to gain insights in the prediction of bond lengths. Besides, the ELFnet also possess 3 different "ELF reading modes" which inspires other possibilities in understanding ELF images. The ELFnet serves as an "ELF-ruler" to give precise bond type labels (or the predicted bond lengths). Such ELF-ruler measured bond types represent a particular bond when distorted by external factors with a quantitative indicator. With the help of such an ELF-ruler, the classification of chemical bonds in general may be extended to more precise types. △ Less

Submitted 13 May, 2023; originally announced May 2023.

Universal enhancement of vacancy diffusion by Mn inducing anomalous Friedel oscillation in concentrated solid-solution alloys

Authors: Huaqing Guan, Shaosong Huang, Fuyang Tian, Chenyang Lu, Qiu Xu, Jijun Zhao

Abstract: We present a proof-of-principle demonstration of a universal law for the element Mn, which greatly enhances vacancy diffusion through an anomalous Friedel Oscillation effect in a series of Ni-based concentrated solid-solution alloys, regardless of the type of atom involved. The antiferromagnetic element Mn possesses a unique half-filled 3d electron structure, creating split virtual bound states ne… ▽ More We present a proof-of-principle demonstration of a universal law for the element Mn, which greatly enhances vacancy diffusion through an anomalous Friedel Oscillation effect in a series of Ni-based concentrated solid-solution alloys, regardless of the type of atom involved. The antiferromagnetic element Mn possesses a unique half-filled 3d electron structure, creating split virtual bound states near the Fermi energy level and producing a large local magnetic moment after vacancy formation. The resultant electron spin oscillations reduce the number of electrons involved in charge density oscillations, destroying charge screening and lowering potential interaction at the saddle point between the vacancy and diffusing atom. This ultimately facilitates vacancy diffusion by reducing energy level variations of conduction band electrons during the diffusion process. These findings offer valuable insights into atom diffusion mechanisms and open up new avenues for manipulating defect properties through unique element design, thereby enabling the creation of high-performance alloys in a broad range of fields. △ Less

Submitted 27 March, 2023; originally announced March 2023.

First-principles study on the superconductivity of N-doped fcc-LuH3

Authors: Zihao Huo, Defang Duan, Tiancheng Ma, Qiwen Jiang, Zihan Zhang, Decheng An, Fubo Tian, Tian Cui

Abstract: Recently, room-temperature superconductor has been claimed in a nitrogen-doped lutetium hydride at near-ambient pressure [Nature 615, 244 (2023)]. Using X-ray diffraction (XRD) and Raman spectra analysis, the authors believed that the superconducting properties can most probably be attributed to Fm-3m-LuH3δNε. Here, we systematic study the phase diagram of Lu-N-H at 1 GPa by using first-principle… ▽ More Recently, room-temperature superconductor has been claimed in a nitrogen-doped lutetium hydride at near-ambient pressure [Nature 615, 244 (2023)]. Using X-ray diffraction (XRD) and Raman spectra analysis, the authors believed that the superconducting properties can most probably be attributed to Fm-3m-LuH3δNε. Here, we systematic study the phase diagram of Lu-N-H at 1 GPa by using first-principle theory and find that there have no thermodynamically stable ternary compounds. Besides, we analyzed the dynamically stability and superconducting properties of N-doped Fm-3m-LuH3 using virtual crystal approximation (VCA) and supercell method. Our theoretical results show that the Tc of N-doped LuH3 cannot reach the level of room-temperature. △ Less

Submitted 22 March, 2023; originally announced March 2023.

Journal ref: Matter Radiat. Extremes 8, 038402 (2023)

Variant Plateau Law in Atomically Thin Transition Metal Dichalcogenide Dome Networks

Authors: Boqing Liu, Tanju Yildirim, Tieyu Lv, Elena Blundo, Li Wang, Lixue Jiang, Hongshuai Zou, Lijun Zhang, Huijun Zhao, Zongyou Yin, Fangbao Tian, Antonio Polimeni, Yuerui Lu

Abstract: Since its fundamental inception from soap bubbles, Plateau law has sparked extensive research in equilibrated states. However, most studies primarily relied on liquids, foams or cellular structures, whereas its applicability has yet to be explored in nano-scale solid films. Here, we observed a variant Plateau law in networks of atomically thin domes made of solid two-dimensional (2D) transition me… ▽ More Since its fundamental inception from soap bubbles, Plateau law has sparked extensive research in equilibrated states. However, most studies primarily relied on liquids, foams or cellular structures, whereas its applicability has yet to be explored in nano-scale solid films. Here, we observed a variant Plateau law in networks of atomically thin domes made of solid two-dimensional (2D) transition metal dichalcogenides (TMDs). Discrete layer-dependent van der Waals (vdWs) interaction energies were experimentally and theoretically obtained for domes protruding in different TMD layers. Significant surface tension differences from layer-dependent vdWs interaction energies manifest in a variant of this fundamental law. Meanwhile, the remarkable mechanical properties, gas impermeability and interlayer vdWs interaction energy of TMD films enable domes and the networks to sustain high gas pressure and exist in a fundamentally variant nature for several years. Our findings pave the way towards exploring variant discretised states with applications in opto-electro-mechanical devices. △ Less

Submitted 13 February, 2023; v1 submitted 9 February, 2023; originally announced February 2023.

Enhanced photovoltaic effect in graphene-silicon Schottky junction under mechanical manipulation

Authors: Dong Pu, Muhammad Abid Anwar, Jiachao Zhou, Renwei Mao, Xin Pan, Jian Chai, Feng Tian, Hua Wang, Huan Hu, Yang Xu

Abstract: Graphene-silicon Schottky junction (GSJ) which has the potential for large-scale manufacturing and integration can bring new opportunities to Schottky solar cells for photovoltaic (PV) power conversion. However, the essential power conversion limitation for these devices lies in the small open-circuit voltage ($V_{oc}$), which depends on the Schottky barrier height (SBH). In this study, we introdu… ▽ More Graphene-silicon Schottky junction (GSJ) which has the potential for large-scale manufacturing and integration can bring new opportunities to Schottky solar cells for photovoltaic (PV) power conversion. However, the essential power conversion limitation for these devices lies in the small open-circuit voltage ($V_{oc}$), which depends on the Schottky barrier height (SBH). In this study, we introduce an electromechanical method based on the flexoelectric effect to enhance the PV efficiency in GSJ. By atomic force microscope (AFM) tip-based indentation and in situ current measurement, the current-voltage (I-V) responses under flexoelectric strain gradient are obtained. The $V_{oc}$ is observed to increase for up to 20$\%$, leading to an evident improvement of the power conversion efficiency. Our studies suggest that strain gradient may offer unprecedented opportunities for the development of GSJ based flexo-photovoltaic applications. △ Less

Submitted 9 January, 2023; originally announced January 2023.

Comments: 7 pages, 4 figures. The following article has been accepted by Applied Physics Letters

First-principles study of oxygen vacancy defects in orthorhombic Hf$_{0.5}$Zr$_{0.5}$O$_2$/SiO$_2$/Si gate stack

Authors: Junshuai Chai, Hao Xu, **juan Xiang, Yuanyuan Zhang, Shu**g Zhao, Fengbin Tian, Jiahui Duan, Kai Han, Xiaolei Wang, Jun Luo, Wenwu Wang, Tianchun Ye

Abstract: The gate defect of the ferroelectric HfO$_2$-based Si field-effect transistor (Si FeFET) plays a dominant role in its reliability issue. The first-principles calculations are an effective method for the atomic-scale understanding of gate defects. However, the first-principles study on the defects of FeFET gate stacks, i.e., metal/orthorhombic-Hf$_{0.5}$Zr$_{0.5}$O$_2$/SiO$_2$/Si structure, has not… ▽ More The gate defect of the ferroelectric HfO$_2$-based Si field-effect transistor (Si FeFET) plays a dominant role in its reliability issue. The first-principles calculations are an effective method for the atomic-scale understanding of gate defects. However, the first-principles study on the defects of FeFET gate stacks, i.e., metal/orthorhombic-Hf$_{0.5}$Zr$_{0.5}$O$_2$/SiO$_2$/Si structure, has not been reported so far. The key challenge is the construction of metal/orthorhombic-Hf$_{0.5}$Zr$_{0.5}$O$_2$/SiO$_2$/Si gate stack models. Here, we use the Hf$_{0.5}$Zr$_{0.5}$O$_2$(130) high-index crystal face as the orthorhombic ferroelectric layer and construct a robust atomic structure of the orthorhombic-Hf$_{0.5}$Zr$_{0.5}$O$_2$/SiO$_2$/Si gate stack without any gap states. Its high structural stability is ascribed to the insulated interface. The calculated band offsets show that this gate structure is of the type-I band alignment. Furthermore, the formation energies and charge transition levels (CTLs) of defects reveal that the oxygen vacancy defects are more favorable to form compared with other defects such as oxygen interstitial and Hf/Zr vacancy, and their CTLs are mainly localized near the Si conduction band minimum and valence band maximum, in agreement with the reported experimental results. The oxygen vacancy defects are responsible for charge trap**/de-trap** behavior in Si FeFET. This work provides an insight into gate defects and paves the way to carry out the first-principles study of ferroelectric HfO$_2$-based Si FeFET. △ Less

Submitted 20 June, 2022; v1 submitted 28 April, 2022; originally announced April 2022.

Comments: 18 pages, 5 figures

Melting curve of magnesium up to 460 GPa from ab initio molecular dynamics simulations

Authors: Chengfeng Cui, Jiawei Xian, Haifeng Liu, Fuyang Tian, Xingyu Gao, Haifeng Song

Abstract: Based on ab initio molecular dynamics simulations, we determined the melting curve of magnesium (Mg) up to ~460 GPa using the solid-liquid coexistence method. Between ~30 and 100 GPa, our melting curve is noticeably lower than those from static experiments, but is in good agreement with recent shock experiments. Up to ~450 GPa, our melting curve is generally consistent with the melting points from… ▽ More Based on ab initio molecular dynamics simulations, we determined the melting curve of magnesium (Mg) up to ~460 GPa using the solid-liquid coexistence method. Between ~30 and 100 GPa, our melting curve is noticeably lower than those from static experiments, but is in good agreement with recent shock experiments. Up to ~450 GPa, our melting curve is generally consistent with the melting points from first-principles calculations using the small-cell coexistence method. We found that, at high pressures of a few hundred GPa, due to the strong softening of interatomic interactions in the liquid phase, solid-liquid coexistence simulations of Mg show some characteristics distinctively different from other metal systems, such as aluminum. For example, at a given volume, the pressure and temperature range for maintaining a stable solid-liquid coexistence state can be very small. The strong softening in the liquid phase also causes the unusual behavior of reentrant melting to occur at very high pressures. The onset of reentrant melting is predicted at ~305 GPa, close to that at ~300 GPa from the small-cell coexistence method. We show that the calculated melting points, considering reentrant melting, can be excellently fitted to a low-order Kechin equation, thereby making it possible for us to obtain a first-principles melting curve of Mg at pressures above 50 GPa for the first time. Similar characteristics in solid-liquid coexistence simulations, as well as reentrant melting, are also expected for other systems with strong softening in the liquid phase at high pressures. △ Less

Submitted 21 May, 2022; v1 submitted 11 February, 2022; originally announced February 2022.

Comments: 22 pages, 9 figures

Journal ref: J. Appl. Phys. 131, 195901 (2022)

Mixed displacement-pressure-phase field framework for finite strain fracture of nearly incompressible hyperelastic materials

Authors: Fucheng Tian, Jun Zeng, Mengnan Zhang, Liangbin Li

Abstract: The favored phase field method (PFM) has encountered challenges in the finite strain fracture modeling of nearly or truly incompressible hyperelastic materials. We identified that the underlying cause lies in the innate contradiction between incompressibility and smeared crack opening. Drawing on the stiffness-degradation idea in PFM, we resolved this contradiction through loosening incompressible… ▽ More The favored phase field method (PFM) has encountered challenges in the finite strain fracture modeling of nearly or truly incompressible hyperelastic materials. We identified that the underlying cause lies in the innate contradiction between incompressibility and smeared crack opening. Drawing on the stiffness-degradation idea in PFM, we resolved this contradiction through loosening incompressible constraint of the damaged phase without affecting the incompressibility of intact material. By modifying the perturbed Lagrangian approach, we derived a novel mixed formulation. In numerical aspects, the finite element discretization uses the classical Q1/P0 and high-order P2/P1 schemes, respectively. To ease the mesh distortion at large strains, an adaptive mesh deletion technology is also developed. The validity and robustness of the proposed mixed framework are corroborated by four representative numerical examples. By comparing the performance of Q1/P0 and P2/P1, we conclude that the Q1/P0 formulation is a better choice for finite strain fracture in nearly incompressible cases. Moreover, the numerical examples also show that the combination of the proposed framework and methodology has vast potential in simulating complex peeling and tearing problems △ Less

Submitted 1 December, 2021; originally announced December 2021.

Tuned Vacancy Diffusion by Mn via Anomalous Friedel Oscillations in NiCoFeCrMn High Entropy Alloys

Authors: Shaosong Huanga, Huaqing Guan, Fuyang Tian, Chenyang Lu, Qiu Xu, Jijun Zhao

Abstract: Vacancy is known to play a critical role in solid state diffusion and determine many properties of the materials. We report a proof-of-principle result on Mn in the role of tuning vacancy diffusion by an anomalous Friedel Oscillations effect in an equivalent NiCoFeCrMn high entropy alloy. The vacancy induced Friedel Oscillations is destroyed by the presence of the first nearest neighboring Mn, ope… ▽ More Vacancy is known to play a critical role in solid state diffusion and determine many properties of the materials. We report a proof-of-principle result on Mn in the role of tuning vacancy diffusion by an anomalous Friedel Oscillations effect in an equivalent NiCoFeCrMn high entropy alloy. The vacancy induced Friedel Oscillations is destroyed by the presence of the first nearest neighboring Mn, opening a channel for long-range influence on the surrounding atoms from the vacancy, resulting in a lower vacancy diffusion barrier energy, despite of the atom type. The effects lead to a remarkable diffusion overlaps of the two type defects, vacancy and interstitial, enhancing their recombination, which can explain well for the experimental results with suppression of vacancy clusters under irradiation. This finding presents new understanding on the atomic diffusion mechanism and thus suggests novel concepts for tuning defect properties in the design of advanced materials with outstanding properties, in a broad field. △ Less

Submitted 1 November, 2021; originally announced November 2021.

Comments: 15 pages, including 4 figures in the manuscript, 5 figures and 1 table in the supplemental material

Twist-diameter coupling drives DNA twist changes by salt and temperature

Authors: Chen Zhang, Fujia Tian, Ying Lu, Bing Yuan, Zhi-Jie Tan, Xing-Hua Zhang, Liang Dai

Abstract: DNA deformations play crucial roles in many biological processes and material applications. During DNA deformation, DNA structural parameters often exhibit non-trivial and counterintuitive couplings, such as the twist-stretch and twist-bending couplings. Here, we reveal an unexpectedly strong negative twist-diameter coupling through the synergy of magnetic-tweezers experiments, atomistic molecular… ▽ More DNA deformations play crucial roles in many biological processes and material applications. During DNA deformation, DNA structural parameters often exhibit non-trivial and counterintuitive couplings, such as the twist-stretch and twist-bending couplings. Here, we reveal an unexpectedly strong negative twist-diameter coupling through the synergy of magnetic-tweezers experiments, atomistic molecular dynamics simulations, and theoretical calculations. In experiments, the DNA twist angle always increases with the concentration of NaCl, KCl, or RbCl. Our simulations quantitatively reproduce salt-induced twist changes and reveal the underlying physical mechanism: the reduction of DNA diameter under a high salt concentration leads to the increase in DNA twist angle through a strong negative twist-diameter coupling. The twist-diameter coupling is mediated by two dihedral angles in DNA structure and the coupling constant is 4.5 kBT/(deg nm) for one base-pair. Based on this coupling constant, we predict the temperature-dependence of DNA twist -0.0102 deg/K per bp, which agrees with our and previous experimental results. Our analysis suggests that the twist-diameter coupling is a common driving force for salt- and temperature-induced DNA twist changes. △ Less

Submitted 7 October, 2021; originally announced October 2021.

Thermal Conductivity of BAs under Pressure

Authors: Songrui Hou, Bo Sun, Fei Tian, Qingan Cai, Shanming Wang, Wanyue Peng, Xi Chen, Zhifeng Ren, Chen Li, Richard Wilson

Abstract: The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three- and four-phonon scattering rates. This study reports the thermal conductivity of BA… ▽ More The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three- and four-phonon scattering rates. This study reports the thermal conductivity of BAs from 0 to 30 GPa. Thermal conductivity vs. pressure of BAs is measured by time-domain thermoreflectance with a diamond anvil cell. In stark contrast to what is typical for nonmetallic crystals, BAs is observed to have a pressure independent thermal conductivity below 30 GPa. The thermal conductivity of nonmetallic crystals typically increases upon compression. The unusual pressure independence of thermal conductivity of BAs shows the important relationship between phonon dispersion properties and three- and four-phonon scattering rates. △ Less

Submitted 16 February, 2023; v1 submitted 1 October, 2021; originally announced October 2021.

Photoinduced multistage phase transitions in Ta2NiSe5

Authors: Q. M. Liu, D. Wu, Z. A. Li, L. Y. Shi, Z. X. Wang, S. J. Zhang, T. Lin, T. C. Hu, H. F. Tian, J. Q. Li, T. Dong, N. L. Wang

Abstract: Utrafast control of material physical properties represents a rapid develo** field in condensed matter physics. Yet, accessing to the long-lived photoinduced electronic states is still in its early stage, especially with respect to an insulator to metal phase transition. Here, by combing transport measurement with ultrashort photoexcitation and coherent phonon spectroscopy, we report on photoind… ▽ More Utrafast control of material physical properties represents a rapid develo** field in condensed matter physics. Yet, accessing to the long-lived photoinduced electronic states is still in its early stage, especially with respect to an insulator to metal phase transition. Here, by combing transport measurement with ultrashort photoexcitation and coherent phonon spectroscopy, we report on photoinduced multistage phase transitions in Ta2NiSe5. Upon excitation by weak pulse intensity, the system is triggered to a short-lived state accompanied by a structural change. Further increasing the excitation intensity beyond a threshold, a photoinduced steady new state is achieved where the resistivity drops by more than four orders at temperature 50 K. This new state is thermally stable up to at least 350 K and exhibits the lattice structure different from any of the thermally accessible equilibrium states. Transmission electron microscopy reveals an in-chain Ta atom displacement in the photoinduced new structure phase. We also found that nano-sheet samples with the thickness less than the optical penetration depth are required for attaining a complete transition. △ Less

Submitted 10 March, 2021; originally announced March 2021.

Comments: 10 pages, 4 figures, accepted by Nature Communications

Journal ref: Nature Communications12, 2050 (2021)

Microwave AC voltage induced phase change in Sb$_2$Te$_3$ nanowires

Authors: Pok-Lam Tse, Laura Mugica-Sanchez, Fugu Tian, Oliver Ruger, Andreas Undisz, George Moethrath, Susumu Takahashi, Carsten Ronning, Jia Grace Lu

Abstract: Scaling information bits to ever smaller dimensions is a dominant drive for information technology (IT). Nanostructured phase change material emerges as a key player in the current green-IT endeavor with low power consumption, functional modularity and promising scalability. In this work, we present the demonstration of microwave AC voltage induced phase change phenomenon at 3 GHz in single Sb… ▽ More Scaling information bits to ever smaller dimensions is a dominant drive for information technology (IT). Nanostructured phase change material emerges as a key player in the current green-IT endeavor with low power consumption, functional modularity and promising scalability. In this work, we present the demonstration of microwave AC voltage induced phase change phenomenon at 3 GHz in single Sb$_2$Te$_3$ nanowires. The resistance change by a total of 6 - 7 orders of magnitude is evidenced by a transition from the crystalline metallic to the amorphous semiconducting phase, which is cross-examined by temperature dependent transport measurement and high-resolution electron microscopy analysis. This discovery could potentially tailor multi-state information bit encoding and discrimination along a single nanowire, rendering technology advancement for neuro-inspired computing devices. △ Less

Submitted 15 August, 2020; originally announced August 2020.

Comments: 25 pages, 14 figures

Numerical calculation of free-energy barriers for entangled polymer nucleation

Authors: Xiaoliang Tang, Fucheng Tian, Tingyu Xu, Liangbin Li, Aleks Reinhardt

Abstract: The crystallisation of entangled polymers from their melt is investigated using computer simulation with a coarse-grained model. Using hybrid Monte Carlo simulations enables us to probe the behaviour of long polymer chains. We identify solid-like beads with a centrosymmetry local order parameter and compute the nucleation free-energy barrier at relatively high supercooling with adaptive-bias windo… ▽ More The crystallisation of entangled polymers from their melt is investigated using computer simulation with a coarse-grained model. Using hybrid Monte Carlo simulations enables us to probe the behaviour of long polymer chains. We identify solid-like beads with a centrosymmetry local order parameter and compute the nucleation free-energy barrier at relatively high supercooling with adaptive-bias windowed umbrella sampling. Our results demonstrate that the critical nucleus sizes and the heights of free-energy barriers do not significantly depend on the molecular weight of the polymer; however, the nucleation rate decreases with increasing molecular weight. Moreover, an analysis of the composition of the critical nucleus suggests that intramolecular growth of the nucleated cluster does not contribute significantly to crystallisation for this system. △ Less

Submitted 11 June, 2020; originally announced June 2020.

Journal ref: J. Chem. Phys. 152, 224904 (2020)

Tailoring Hybrid Anomalous Hall Response in Engineered Magnetic Topological Insulator Heterostructures

Authors: Peng Chen, Yong Zhang, Qi Yao, Fugu Tian, Lun Li, Zhengkun Qi, Xiaoyang Liu, Liyang Liao, Cheng Song, **gyuan Wang, **g Xia, Gang Li, David M. Burn, Gerrit van der Laan, Thorsten Hesjedal, Shilei Zhang, Xufeng Kou

Abstract: Engineering the anomalous Hall effect (AHE) in the emerging magnetic topological insulators (MTIs) has great potentials for quantum information processing and spintronics applications. In this letter, we synthesize the epitaxial Bi2Te3/MnTe magnetic heterostructures and observe pronounced AHE signals from both layers combined together. The evolution of the resulting hybrid AHE intensity with the t… ▽ More Engineering the anomalous Hall effect (AHE) in the emerging magnetic topological insulators (MTIs) has great potentials for quantum information processing and spintronics applications. In this letter, we synthesize the epitaxial Bi2Te3/MnTe magnetic heterostructures and observe pronounced AHE signals from both layers combined together. The evolution of the resulting hybrid AHE intensity with the top Bi2Te3 layer thickness manifests the presence of an intrinsic ferromagnetic phase induced by the topological surface states at the heterolayer-interface. More importantly, by do** the Bi2Te3 layer with Sb, we are able to manipulate the sign of the Berry phase-associated AHE component. Our results demonstrate the un-paralleled advantages of MTI heterostructures over magnetically doped TI counterparts, in which the tunability of the AHE response can be greatly enhanced. This in turn unveils a new avenue for MTI heterostructure-based multifunctional applications. △ Less

Submitted 15 December, 2019; originally announced December 2019.

Comments: 20 pages, 4 figures

Optical properties of cubic boron arsenide

Authors: Bai Song, Ke Chen, Kyle Bushick, Kelsey A. Mengle, Fei Tian, Geethal Amila Gamage, Zhifeng Ren, Emmanouil Kioupakis, Gang Chen

Abstract: The ultrahigh thermal conductivity of boron arsenide makes it a promising material for next-generation electronics and optoelectronics. In this work, we report measured optical properties of cubic boron arsenide crystals including the complex dielectric function, refractive index, and absorption coefficient in the ultraviolet, visible, and near-infrared wavelength range. The data were collected at… ▽ More The ultrahigh thermal conductivity of boron arsenide makes it a promising material for next-generation electronics and optoelectronics. In this work, we report measured optical properties of cubic boron arsenide crystals including the complex dielectric function, refractive index, and absorption coefficient in the ultraviolet, visible, and near-infrared wavelength range. The data were collected at room temperature using spectroscopic ellipsometry as well as transmission and reflection spectroscopy. We further calculate the optical response using density functional and many-body perturbation theory, considering quasiparticle and excitonic corrections. The computed values for the direct and indirect band gaps (4.25 eV and 2.07 eV) agree well with the measured results (4.12 eV and 2.02 eV). Our findings contribute to the effort of using boron arsenide in novel electronic and optoelectronic applications that take advantage of its demonstrated ultrahigh thermal conductivity and predicted high ambipolar carrier mobility. △ Less

Submitted 12 November, 2019; originally announced November 2019.

Photoluminescence map** and time-domain thermo-photoluminescence for rapid imaging and measurement of thermal conductivity of boron arsenide

Authors: Shuai Yue, Geethal Amila Gamage, Mohammadjavad Mohebinia, David Mayerich, Vishal Talari, Yu Deng, Fei Tian, Shenyu Dai, Haoran Sun, Viktor G. Hadjiev, Wei Zhang, Guoying Feng, Jonathan Hu, Dong Liu, Zhiming Wang, Zhifeng Ren, Jiming Bao

Abstract: Cubic boron arsenide (BAs) is attracting greater attention due to the recent experimental demonstration of ultrahigh thermal conductivity \k{appa} above 1000 W/mK. However, its bandgap has not been settled and a simple yet effective method to probe its crystal quality is missing. Furthermore, traditional \k{appa} measurement methods are destructive and time consuming, thus they cannot meet the urg… ▽ More Cubic boron arsenide (BAs) is attracting greater attention due to the recent experimental demonstration of ultrahigh thermal conductivity \k{appa} above 1000 W/mK. However, its bandgap has not been settled and a simple yet effective method to probe its crystal quality is missing. Furthermore, traditional \k{appa} measurement methods are destructive and time consuming, thus they cannot meet the urgent demand for fast screening of high \k{appa} materials. After we experimentally established 1.82 eV as the indirect bandgap of BAs and observed room-temperature band-edge photoluminescence, we developed two new optical techniques that can provide rapid and non-destructive characterization of \k{appa} with little sample preparation: photoluminescence map** (PL-map**) and time-domain thermo-photoluminescence (TDTP). PL-map** provides nearly real-time image of crystal quality and \k{appa} over mm-sized crystal surfaces; while TDTP allows us to pick up any spot on the sample surface and measure its \k{appa} using nanosecond laser pulses. These new techniques reveal that the apparent single crystals are not only non-uniform in \k{appa}, but also are made of domains of very distinct \k{appa}. Because PL-map** and TDTP are based on the band-edge PL and its dependence on temperature, they can be applied to other semiconductors, thus paving the way for rapid identification and development of high-\k{appa} semiconducting materials. △ Less

Submitted 15 October, 2019; originally announced October 2019.

Boron isotope effect on the thermal conductivity of boron arsenide single crystals

Authors: Haoran Sun, Ke Chen, Geethal Amila Gamage, Hamidreza Ziyaee, Fei Wang, Yu Wang, Viktor G. Hadjiev, Fei Tian, Gang Chen, Zhifeng Ren

Abstract: Boron arsenide (BAs) with a zinc blende structure has recently been discovered to exhibit unusual and ultrahigh thermal conductivity (k), providing a new outlook for research on BAs and other high thermal conductivity materials. Technology for BAs crystal growth has been continuously improving, however, the influence of boron isotopes, pure or mixed, on the thermal conductivity in BAs is still not… ▽ More Boron arsenide (BAs) with a zinc blende structure has recently been discovered to exhibit unusual and ultrahigh thermal conductivity (k), providing a new outlook for research on BAs and other high thermal conductivity materials. Technology for BAs crystal growth has been continuously improving, however, the influence of boron isotopes, pure or mixed, on the thermal conductivity in BAs is still not completely clear. Here we report detailed studies on the growth of single crystals of BAs with different isotopic ratios and demonstrate that the k of isotopically pure BAs is at least 10% higher than that of BAs grown from natural B. Raman spectroscopy characterization shows differences in scattering among various BAs samples. The presented results will be helpful in guiding further studies on the influence of isotopes on optimizing k in BAs. △ Less

Submitted 4 October, 2019; originally announced October 2019.

Comments: 14 pages, 2 figures, 1 table

Journal ref: Materials Today Physics, 2019

Effect of nucleation sites on the growth and quality of single-crystal boron arsenide

Authors: Geethal Amila Gamage, Ke Chen, Gang Chen, Fei Tian, Zhifeng Ren

Abstract: Boron arsenide (BAs) has been the least investigated cubic III-V compound, but it has recently attracted significant attention since the confirmation of its unusually high thermal conductivity above 1000 W/m-K. However, determining how to achieve growth of a BAs single crystal on the centimeter scale remains unsolved, which strongly limits further research into, and potential applications of, this… ▽ More Boron arsenide (BAs) has been the least investigated cubic III-V compound, but it has recently attracted significant attention since the confirmation of its unusually high thermal conductivity above 1000 W/m-K. However, determining how to achieve growth of a BAs single crystal on the centimeter scale remains unsolved, which strongly limits further research into, and potential applications of, this interesting material. Here we report our technique to grow a 7-mm-long BAs single crystal via the chemical vapor transport method by applying an additional nucleation site. The different thermal conductivity values obtained from BAs single crystals grown on nucleation sites of different compositions show the importance of choosing the proper nucleation-site material. We believe these findings will inspire further research into the growth of this unique semiconductor. △ Less

Submitted 4 October, 2019; originally announced October 2019.

Comments: 8 pages, 3 figures

Journal ref: Materials Today Physics, 2019

Machine learning magnetic parameters from spin configurations

Authors: Dingchen Wang, Songrui Wei, Anran Yuan, Fanghua Tian, Kaiyan Cao, Qizhong Zhao, Dezhen Xue, Sen Yang

Abstract: Hamiltonian parameter estimation is crucial in condensed matter physics, but time and cost consuming in terms of resources used. With advances in observation techniques, high-resolution images with more detailed information are obtained, which can serve as an input to machine learning (ML) algorithms to extract Hamiltonian parameters. However, the number of labeled images is rather limited. Here,… ▽ More Hamiltonian parameter estimation is crucial in condensed matter physics, but time and cost consuming in terms of resources used. With advances in observation techniques, high-resolution images with more detailed information are obtained, which can serve as an input to machine learning (ML) algorithms to extract Hamiltonian parameters. However, the number of labeled images is rather limited. Here, we provide a protocol for Hamiltonian parameter estimation based on a machine learning architecture, which is trained on a small amount of simulated images and applied to experimental spin configuration images. Sliding windows on the input images enlarges the number of training images; therefore we can train well a neural network on a small dataset of simulated images which are generated adaptively using the same external conditions such as temperature and magnetic field as the experiment. The neural network is applied to the experimental image and estimates magnetic parameters efficiently. We demonstrate the success of the estimation by reproducing the same configuration from simulation and predict a hysteresis loop accurately. Our approach paves a way to a stable and general parameter estimation. △ Less

Submitted 14 November, 2019; v1 submitted 15 August, 2019; originally announced August 2019.

Comments: 7pages, 5figures

Thermal expansion coefficient and lattice anharmonicity of cubic boron arsenide

Authors: Xi Chen, Chunhua Li, Fei Tian, Geethal Amila Gamage, Sean Sullivan, Jianshi Zhou, David Broido, Zhifeng Ren, Li Shi

Abstract: Recent measurements of an unusual high thermal conductivity of around 1000 W m-1 K-1 at room temperature in cubic boron arsenide (BAs) confirm predictions from theory and suggest potential applications of this semiconductor compound for thermal management applications. Knowledge of the thermal expansion coefficient and Grüneisen parameter of a material contributes both to the fundamental understan… ▽ More Recent measurements of an unusual high thermal conductivity of around 1000 W m-1 K-1 at room temperature in cubic boron arsenide (BAs) confirm predictions from theory and suggest potential applications of this semiconductor compound for thermal management applications. Knowledge of the thermal expansion coefficient and Grüneisen parameter of a material contributes both to the fundamental understanding of its lattice anharmonicity and to assessing its utility as a thermal-management material. However, previous theoretical calculations of the thermal expansion coefficient and Grüneisen parameter of BAs yield inconsistent results. Here we report the linear thermal expansion coefficient of BAs obtained from the X-ray diffraction measurements from 300 K to 773 K. The measurement results are in good agreement with our ab initio calculations that account for atomic interactions up to fifth nearest neighbours. With the measured thermal expansion coefficient and specific heat, a Grüneisen parameter of BAs of 0.84 +/- 0.09 is obtained at 300 K, in excellent agreement with the value of 0.82 calculated from first principles and much lower than prior theoretical results. Our results confirm that BAs exhibits a better thermal expansion coefficient match with commonly used semiconductors than other high-thermal conductivity materials such as diamond and cubic boron nitride. △ Less

Submitted 14 June, 2019; v1 submitted 4 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. Applied 11, 064070 (2019)

A structural modeling approach to solid solutions based on the similar atomic environment

Authors: Fuyang Tian, De-Ye Lin, Xingyu Gao, Ya-Fan Zhao, Hai-Feng Song

Abstract: Solid solution is an important way to enhance the structural and functional performances of materials. In this work, we develop a structural modeling approach to solid solutions based on the similar atomic environment (SAE). We propose the similarity function associated with any type of atom cluster to describe quantitatively the configurational deviation from the desired solid solution structure… ▽ More Solid solution is an important way to enhance the structural and functional performances of materials. In this work, we develop a structural modeling approach to solid solutions based on the similar atomic environment (SAE). We propose the similarity function associated with any type of atom cluster to describe quantitatively the configurational deviation from the desired solid solution structure that is fully disordered or contains short-range order (SRO). In this manner, the structural modeling for solid solution is transferred to a minimization problem in the configuration space. Moreover, we pay efforts to enhance the practicality and functionality of this approach. The approach and implementation are demonstrated by the cross-validations with the special quasi-random structure (SQS) method. We apply the SAE method to the typical quinary CoCrFeMnNi high-entropy alloy, continuous binary Ta-W alloy and ternary CoCrNi medium-entropy alloy with SRO as prototypes. In combination with ab initio calculations, we investigate the structural properties and compare the calculation results with experiments. △ Less

Submitted 15 May, 2020; v1 submitted 14 October, 2018; originally announced October 2018.

Comments: 24 pages; 8 figures; 6 tables

Flow-induced Density Fluctuation assisted Nucleation in Polyethylene

Authors: Xiaoliang Tang, Junsheng Yang, Fucheng Tian, Tingyu Xu, Chun Xie, Liangbin Li

Abstract: The nucleation process of polyethylene under quiescent and shear flow conditions are comparatively studied with all_atom molecular dynamical simulations. At both conditions, nucleation are demonstrated to be two_step processes, which, however, proceed via different intermediate orders. Quiescent nucleation is assisted by local structure order coupling conformational and local rotational symmetric… ▽ More The nucleation process of polyethylene under quiescent and shear flow conditions are comparatively studied with all_atom molecular dynamical simulations. At both conditions, nucleation are demonstrated to be two_step processes, which, however, proceed via different intermediate orders. Quiescent nucleation is assisted by local structure order coupling conformational and local rotational symmetric orderings, while flow_induced nucleation is promoted by density fluctuation, which is a coupling effect of conformational and orientation orderings. Flow drives the transformation from flexible chains to rigid conformational ordered segments and circumvents the entropic penalty, which is the most peculiar and rate_limited step in polymer crystallization. Current work suggests that flow accelerates nucleation in orders of magnitude is not simply due to flow_induced entropic reduction of melt as early models proposed, which is mainly attributed to the different kinetic pathway via conformational/orientational ordering_density fluctuation_nucleation. △ Less

Submitted 7 March, 2018; originally announced March 2018.

Comments: 18 pages, 4 figures

Investigation on the reported superconductivity in intercalated black phosphorus

Authors: Hanming Yuan, Liangzi Deng, Bing Lv, Zheng Wu, Ze Yang, Sheng Li, Shuyuan Huyan, Yizhou Ni, **gying Sun, Fei Tian, Dezhi Wang, Hui Wang, Shuo Chen, Zhifeng Ren, Ching-Wu Chu

Abstract: Superconductivity intrinsic to the intercalated black phosphorus (BP) with a transition temperature Tc of 3.8 K, independent of the intercalant, whether an alkali or an alkaline earth element, has been reported recently by R. Zhang et al. (2017). However, the reported Tc and the field effect on the superconducting (SC) transition both bear great similarities to those for the pure Sn, which is comm… ▽ More Superconductivity intrinsic to the intercalated black phosphorus (BP) with a transition temperature Tc of 3.8 K, independent of the intercalant, whether an alkali or an alkaline earth element, has been reported recently by R. Zhang et al. (2017). However, the reported Tc and the field effect on the superconducting (SC) transition both bear great similarities to those for the pure Sn, which is commonly used for BP synthesis under the vapor transport method. We have therefore decided to determine whether a minute amount of Sn is present in the starting high purity BP crystals and whether it is the culprit for the small SC signal detected. Energy-dispersive X-ray spectroscopy results confirmed the existence of Sn in the starting high purity BP crystals purchased from the same company as in R. Zhang et al. (2017). We have reproduced the SC transition at 3.8 K in Li- and Na-intercalated BP crystals that contain minute amounts of Sn when prepared by the vapor transport method but not in BP crystals that are free of Sn when prepared by the high-pressure method. We have therefore concluded that the SC transition reported by R. Zhang et al. (2017) is associated with the Sn but not intrinsic to the intercalated BP crystals. △ Less

Submitted 18 December, 2017; originally announced December 2017.

Comments: 8 pages, 6 figures

Journal ref: Materials Today Physics 4 (2018) 7-11

Local Structure Order Assisted Two-step Crystal Nucleation in Polyethylene

Authors: Xiaoliang Tang, Junsheng Yang, Tingyu Xu, Fucheng Tian, Chun Xie, Liangbin Li

Abstract: Homogeneous nucleation process of polyethylene (PE) is studied with full-atom molecular dynamic simulation. To account the complex shape with low symmetry and the peculiar intra-chain conformational order of polymer, we introduce a shape descriptor OCB coupling conformational order and inter-chain rotational symmetry, which is able to differentiate hexagonal and orthorhombic clusters from melt. Wi… ▽ More Homogeneous nucleation process of polyethylene (PE) is studied with full-atom molecular dynamic simulation. To account the complex shape with low symmetry and the peculiar intra-chain conformational order of polymer, we introduce a shape descriptor OCB coupling conformational order and inter-chain rotational symmetry, which is able to differentiate hexagonal and orthorhombic clusters from melt. With the shape descriptor OCB, we find that coupling between conformational and inter-chain rotational orderings results in the formation of hexagonal clusters first, which is dynamic in nature. Whilst nucleation of orthorhombic structure occurs inside of hexagonal clusters later, which proceeds via the coalescence of neighboring hexagonal clusters rather than standard stepwise growth process. This demonstrates that nucleation of PE crystal is a two-step process with the assistance of OCB order, which is different from early models for polymer crystallization but similar with that proposed for spherical 'atoms' like colloid and metal. △ Less

Submitted 15 August, 2017; v1 submitted 7 March, 2017; originally announced March 2017.

Comments: 29 pages, 6 figures

Journal ref: Phys. Rev. Materials 1, 073401 (2017)

Nature of charge density waves and superconductivity in 1\emph{T}-TaSe$_{2-x}$Te$_x$

Authors: Y. Liu, D. F. Shao, L. J. Li, W. J. Lu, X. D. Zhu, P. Tong, R. C. Xiao, L. S. Ling, C. Y. Xi, L. Pi, H. F. Tian, H. X. Yang, J. Q. Li, W. H. Song, X. B. Zhu, Y. P. Sun

Abstract: Transition-metal dichalcogenides (TMDs) $MX_2$ ($M$ = Ti, Nb, Ta; $X$ = S, Se, Te) exhibit a rich set of charge density wave (CDW) orders, which usually coexist and/or compete with superconductivity. The mechanisms of CDWs and superconductivity in TMDs are still under debate. Here we perform an investigation on a typical TMD system, 1\emph{T}-TaSe$_{2-x}$Te$_x$ ($0 \leq x \leq 2$). Do**-induced… ▽ More Transition-metal dichalcogenides (TMDs) $MX_2$ ($M$ = Ti, Nb, Ta; $X$ = S, Se, Te) exhibit a rich set of charge density wave (CDW) orders, which usually coexist and/or compete with superconductivity. The mechanisms of CDWs and superconductivity in TMDs are still under debate. Here we perform an investigation on a typical TMD system, 1\emph{T}-TaSe$_{2-x}$Te$_x$ ($0 \leq x \leq 2$). Do**-induced disordered distribution of Se/Te suppresses CDWs in 1\emph{T}-TaSe$_2$. A domelike superconducting phase with the maximum $T_\textrm{c}^{\textrm{onset}}$ of 2.5 K was observed near CDWs. The superconducting volume is very small inside the CDW phase and becomes very large instantly when the CDW phase is fully suppressed. The observations can be understood based on the strong \emph{\textbf{q}}-dependent electron-phonon coupling-induced periodic-lattice-distortion (PLD) mechanism of CDWs. The volume variation of superconductivity implies the emergence of domain walls in the suppressing process of CDWs. Our concluded scenario makes a fundamental understanding about CDWs and related superconductivity in TMDs. △ Less

Submitted 21 July, 2016; v1 submitted 25 February, 2016; originally announced February 2016.

Journal ref: Phys. Rev. B 94, 045131 (2016)

High-pressure structures and superconductivity of bismuth hydrides

Authors: Yanbin Ma, Defang Duan, Da Li, Yunxian Liu, Fubo Tian, Hongyu Yu, Chunhong Xu, Ziji Shao, Bingbing Liu, Tian Cui

Abstract: We have systematically searched for the ground state structures of bismuth hydrides based on evolutionary algorithm method and particle swarm optimization algorithm method. Given only rich-hydrogen region, except for BiH$_{3}$, other hydrides (BiH, BiH$_{2}$, BiH$_{4}$, BiH$_{5}$, BiH$_{6}$) have been predicted to be stable with pressurization. With the increase of hydrogen content, hydrogen exist… ▽ More We have systematically searched for the ground state structures of bismuth hydrides based on evolutionary algorithm method and particle swarm optimization algorithm method. Given only rich-hydrogen region, except for BiH$_{3}$, other hydrides (BiH, BiH$_{2}$, BiH$_{4}$, BiH$_{5}$, BiH$_{6}$) have been predicted to be stable with pressurization. With the increase of hydrogen content, hydrogen exists in bismuth hydrides with the different forms and presents the characteristics of ionicity. Under high pressure, the remarkable structural feature is the emergence of H$_{2}$ units in BiH$_{2}$, BiH$_{4}$ and BiH$_{6}$, and BiH$_{6}$ adopts a startling layered structure intercalated by H$_{2}$ and the linear H$_{3}$ units. Further calculations show these energetically stable hydrides are good metal and their metallic pressures are lower than that of pure solid hydrogen because of the do** impurities. The $T_{c}$ in the range of 20-119 K has been calculated by the Allen-Dynes modified McMillan equation, which indicates all these stable hydrides are potential high-temperature superconductors. Remarkably, it is the H-Bi-H and Bi atoms vibrations rather than the high-frequency H$_{2}$ or H$_{3}$ units that dominate the superconductivity. In addition, hydrogen content has a great influence on the superconducting transition temperature. △ Less

Submitted 17 November, 2015; originally announced November 2015.

The unexpected binding and superconductivity in SbH4 at high pressure

Authors: Yanbin Ma, Defang Duan, Da Li, Yunxian Liu, Fubo Tian, Xiaoli Huang, Zhonglong Zhao, Hongyu Yu, Bingbing Liu, Tian Cui

Abstract: The semimetal antimony (Sb) element doped into hydrogen has been performed theoretically to explored high-pressure crystal structure and superconductivity of antimony hydrides. The unexpected stoichiometry $\textrm{SbH}_\textrm{4}$ with $P6_3/mmc$ symmetry is found to have most negative enthalpy and embody the coexistence of covalent and ionic bonds. It is a metallic phase and stable in the pressu… ▽ More The semimetal antimony (Sb) element doped into hydrogen has been performed theoretically to explored high-pressure crystal structure and superconductivity of antimony hydrides. The unexpected stoichiometry $\textrm{SbH}_\textrm{4}$ with $P6_3/mmc$ symmetry is found to have most negative enthalpy and embody the coexistence of covalent and ionic bonds. It is a metallic phase and stable in the pressure ranges of 127-300 GPa. Furthermore, a superconducting critical temperature ($T_c$) of 106 K is obtained at 150 GPa by employing the Allen-Dynes modified McMillan equation. In addition, an extrusive distinguishing feature is the presence of soft phonon modes, which is primary contribution to the strength of electron-phonon coupling. △ Less

Submitted 22 June, 2015; v1 submitted 11 June, 2015; originally announced June 2015.

Comments: 14 pages, 4 figures

Decomposition of solid hydrogen bromide at high pressure

Authors: Defang Duan, Fubo Tian, Xiaoli Huang, Da Li, Hongyu Yu, Yunxian Liu, Yanbin Ma, Bingbing Liu, Tian Cui

Abstract: The stability of different stoichiometric H$_n$Br ($n$=1-7) compounds under pressure are extensively studied using density functional theory calculations. Five new energetically stable stoichiometries of H$_2$Br, H$_3$Br, H$_4$Br, H$_5$Br, and H$_7$Br were uncovered at high pressure. The results show that HBr is stable below 64 GPa, then decomposes into new compound H$_2$Br and Br$_2$ molecular cr… ▽ More The stability of different stoichiometric H$_n$Br ($n$=1-7) compounds under pressure are extensively studied using density functional theory calculations. Five new energetically stable stoichiometries of H$_2$Br, H$_3$Br, H$_4$Br, H$_5$Br, and H$_7$Br were uncovered at high pressure. The results show that HBr is stable below 64 GPa, then decomposes into new compound H$_2$Br and Br$_2$ molecular crystal. For H$_2$Br and H$_3$Br compounds, they were found to become stable above 30 GPa and 8 GPa, respectively. In addition, we accidentally discovered the triangular H$_3^+$ species in H$_5$Br compounds at 100 GPa. Further electron-phonon coupling calculations predicted that hydrogen-rich H$_2$Br and H$_4$Br compounds are superconductors with critical temperature of superconductivity $T_c$ of 12.1 K and 2.4 K at 240 GPa, respectively. △ Less

Submitted 5 April, 2015; originally announced April 2015.

Comments: 15 pages, 5 figures

Phase diagram and superconductivity of polonium hydrides under high pressure

Authors: Yunxian Liu, Defang Duan, Fubo Tian, Da Li, Xiao**g Sha, Zhonglong Zhao, Huadi Zhang, Gang Wu, Hongyu Yu, Bingbing Liu, Tian Cui

Abstract: High pressure structures, phase diagram and superconductivity of polonium hydrides have been systematically investigated through the first-principles calculations based on the density functional theory. With the increasing pressure, several stoichiometries (PoH, $\textrm{PoH}_\textrm{2}$, $\textrm{PoH}_4$ and $\textrm{PoH}_6$) are predicted to stabilize in the excess hydrogen environment. All of t… ▽ More High pressure structures, phase diagram and superconductivity of polonium hydrides have been systematically investigated through the first-principles calculations based on the density functional theory. With the increasing pressure, several stoichiometries (PoH, $\textrm{PoH}_\textrm{2}$, $\textrm{PoH}_4$ and $\textrm{PoH}_6$) are predicted to stabilize in the excess hydrogen environment. All of the reported hydrides, exception of PoH, exhibit intriguing structural character with the appearing $\textrm{H}_2$ units. Moreover, our electronic band structure and the projected density of states (PDOS) demonstrate that these energetically stable phases are metallic. The application of the Allen-Dynes modified McMillan equation with the calculated electron-phonon coupling parameter reveals that $\textrm{PoH}_4$ is a superconductor with a critical temperature $T_c$ of 41.2-47.2 K at 300 GPa. △ Less

Submitted 30 March, 2015; originally announced March 2015.

Comments: 14 pages, 5 figures

Influence of oxygen on thermal stability of nanocrystalline aluminum studied by positron annihilation spectroscopy

Authors: Xian-Bao Song, Zhu Wang, Peng-Fei Tai, Feng-Shou Tian, Liang-Liang Liu

Abstract: The thermal stability of nanocrystalline (nc) Al has been studied by means of positron lifetime spectroscopy and X-ray diffraction (XRD), prepared by compacting nanoparticles under high pressures. Those nanoparticles were produced by the flow-levitation (FL) method [1] and the arc-discharge (DC) method. Effect of oxide at nanoparticle surface on structure stability was investigated especially in t… ▽ More The thermal stability of nanocrystalline (nc) Al has been studied by means of positron lifetime spectroscopy and X-ray diffraction (XRD), prepared by compacting nanoparticles under high pressures. Those nanoparticles were produced by the flow-levitation (FL) method [1] and the arc-discharge (DC) method. Effect of oxide at nanoparticle surface on structure stability was investigated especially in this experiment. The positron lifetime results reveal that vacancy clusters in grain boundaries are dominant positron traps according to the high relative intensity of the positron lifetime τ2 in both samples. The mean grain size of the sample consisting of nanoparticles with partially oxidized surfaces is almost unchanged after aging at 150 for 84 h, with that of the sample consisting of pure nc Al increasing. The partially oxidized surfaces of nanoparticles hinder the growth of grain when aging at 150, vacancy clusters related to Al2O3 need longer aging time to decompose, which implies that the oxide stabilizes the microstructure of the nanomaterials. The effect is beneficial for nc materials to keep excellent properties. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: 9 pages, 4 figure, submitted to Chinese Physics C

Pressure-induced decomposition of solid hydrogen sulfide

Authors: Defang Duan, Xiaoli Huang, Fubo Tian, Da Li, Hongyu, Yu, Yunxian Liu, Yanbin Ma, Bingbing Liu, Tian Cui

Abstract: Solid hydrogen sulfide is well known as a typical molecular crystal but its stability under pressure is still under debate. Particularly, Eremets et al. found the high pressure superconductivity with $T_{c}\approx$ 190 K in a H$_{2}$S sample [arXiv: 1412.0460 (2014)] which is associates with the elemental decomposition into H$_{3}$S [Sci. Rep. 4, 6968 (2014)]. Therefore, on what pressure H$_{2}$S… ▽ More Solid hydrogen sulfide is well known as a typical molecular crystal but its stability under pressure is still under debate. Particularly, Eremets et al. found the high pressure superconductivity with $T_{c}\approx$ 190 K in a H$_{2}$S sample [arXiv: 1412.0460 (2014)] which is associates with the elemental decomposition into H$_{3}$S [Sci. Rep. 4, 6968 (2014)]. Therefore, on what pressure H$_{2}$S can decompose and which kind of the products of decomposition urgent need to be solved. In this paper, we have performed an extensive structural study on different stoichiometries H$_{n}$S with ${n> 1}$ under high pressure using $ab$ $initio$ calculations. Our results show that H$_{2}$S is stable below 50 GPa and decomposes into H$_3$S and sulfur at high pressure, while H$_{3}$S is stable at least up to 300 GPa. The other hydrogen-rich H$_{4}$S, H$_{5}$S, and H$_{6}$S are unstable in the pressure range from 20 to 300 GPa. △ Less

Submitted 8 January, 2015; originally announced January 2015.

Journal ref: Phys. Rev. B 91, 180502 (2015)

Replying "the comment on Interlayer interactions in graphites"

Authors: Xiaobin Chen, Fuyang Tian, Clas Persson, Wenhui Duan, Nanxian Chen

Abstract: For the moment, there is no exact description of van der Waals (vdW) interactions. ACFD-RPA \cite{Gould1} is expected to better describe vdW bonding, but it is not exact. The PBE/DFT-D2 method is less satisfactory, however, its results are in good agreement with experimental data. Although our fitting technique may weaken (not neglect) the vdW interactions and produce interlayer potentials with we… ▽ More For the moment, there is no exact description of van der Waals (vdW) interactions. ACFD-RPA \cite{Gould1} is expected to better describe vdW bonding, but it is not exact. The PBE/DFT-D2 method is less satisfactory, however, its results are in good agreement with experimental data. Although our fitting technique may weaken (not neglect) the vdW interactions and produce interlayer potentials with weakened vdW, the obtained interlayer potentials reproduce energetics of graphite near the equilibrium interlayer distance very well, as shown in Ref. \cite{Chen}. If having inputs which fully include vdW interactions and having better fitting functions, we believe that interlayer potentials can also fully include vdW interactions in graphite system. △ Less

Submitted 12 July, 2014; originally announced July 2014.

Comments: 4 pages 1 figure

Archimedean solid-like superconducting framework in phase-separated K0.8Fe1.6+xSe2 (0<=x<=0.15)

Authors: Z. Wang, Y. Cai, Z. W. Wang, C. Ma, Z. Chen, H. X. Yang, H. F. Tian, J. Q. Li

Abstract: The superconducting (SC) phase in the phase-separated (PS) K0.8Fe1.6+xSe2 (0<=x<=0.15) materials is found to crystallize on Archimedean solid-like frameworks, this structural feature originate from a spinodal phase separation (SPS) at around Ts~540K depending slightly on the Fe concentration. Two stable phases in K0.8Fe1.6+xSe2 are demonstrated to be the SC K0.5Fe2Se2 and antiferromagnetic (AFM) K… ▽ More The superconducting (SC) phase in the phase-separated (PS) K0.8Fe1.6+xSe2 (0<=x<=0.15) materials is found to crystallize on Archimedean solid-like frameworks, this structural feature originate from a spinodal phase separation (SPS) at around Ts~540K depending slightly on the Fe concentration. Two stable phases in K0.8Fe1.6+xSe2 are demonstrated to be the SC K0.5Fe2Se2 and antiferromagnetic (AFM) K0.8Fe1.6Se2. The spinodal waves go along the systematic [113] direction and result in notable lamellar structure as illustrated by using the strain-field theoretical simulation. The 3-dimentional SC framework is constructed by hollow truncated octahedra similar with what discussed for Archimedean solids. Based on this structural model, we can efficiently calculate the volume fraction of SC phase in this type of PS SC materials. △ Less

Submitted 6 January, 2014; originally announced January 2014.

Comments: 14 pages, 4 figures + Suppl. material (7 pages, 7 figures)

"Annular" ferroelectric domains in hexagonal manganites

Authors: J. Q. Li, J. Li, H. X. Yang, H. F. Tian, S-W. Cheong, C. Ma, S. Zhang, Y. G. Zhao

Abstract: Structural features of ferroic domains are fundamentally important for the understanding of microstructure and physical properties of ferroic materials, and they are also of technological significance for information storage and electronic switches. There are three well-known forms of ferroic orders in correlation with the spontaneous magnetization, electric polarization, and spontaneous strain, r… ▽ More Structural features of ferroic domains are fundamentally important for the understanding of microstructure and physical properties of ferroic materials, and they are also of technological significance for information storage and electronic switches. There are three well-known forms of ferroic orders in correlation with the spontaneous magnetization, electric polarization, and spontaneous strain, respectively. Ferroelectricity often accompanies ferroelastic strain, so ferroelectric domains tend to form in simple elongated configurations. However, due to strong boundary conditions, ferroelectric domains in nano-materials or near defects can have unusual configurations. In addition, vortex domains where multiple ferroelectric domains merge at one point have been observed in YMnO3. Herein, we report the discovery of unique ferroelectric domains with a concentric cylindrical shape in hexagonal manganites. We have also observed remarkable domains with multiple annular patterns. Our findings could open a new avenue for comprehensive studies of the ferroic domains, and this novel pattern could also leads to possibilities for new technologic applications. △ Less

Submitted 21 May, 2012; v1 submitted 20 April, 2012; originally announced April 2012.

Comments: This paper has been withdrawn by the author due to some reasons relative to paper submission

Phase separation and stripe patterns in K0.8Fe1.6+xSe2 superconductors

Authors: Z. W. Wang, Z. Wang, Y. J. Song, C. Ma, H. L. Shi, Z. Chen, H. F. Tian, H. X. Yang, G. F. Chen, J. Q. Li

Abstract: Structural investigations on the K0.8Fe1.6+xSe2 superconducting materials have revealed remarkable micro-stripes arising evidently from the phase separation. Two coexisted structural phases can be characterized by modulations of q1 = 1/5[a*+3b*], the antiferromagnetic phase K0.8Fe1.6Se2, and q2 = 1/2[a*+b*], the superconducting phase K0.75Fe2Se2, respectively. These stripe patterns likely result f… ▽ More Structural investigations on the K0.8Fe1.6+xSe2 superconducting materials have revealed remarkable micro-stripes arising evidently from the phase separation. Two coexisted structural phases can be characterized by modulations of q1 = 1/5[a*+3b*], the antiferromagnetic phase K0.8Fe1.6Se2, and q2 = 1/2[a*+b*], the superconducting phase K0.75Fe2Se2, respectively. These stripe patterns likely result from the anisotropic assembly of superconducting particles along the [110] and [1-10] direction. In addition to the notable stripe structures, a nano-scale phase separation also appears in present superconducting system as clearly observed by high-resolution transmission electron microscopy. Certain notable experimental data obtained in this heterogenous system can be quantitatively explained by the percolation scenario. △ Less

Submitted 20 April, 2012; originally announced April 2012.

Comments: 15 pages, 6 figures

Journal ref: J. Phys. Chem. C, 116 17847(2012)

Collapse of the Fe-vacancy order and successive phase transitions in superconducting KxFe2-ySe2 (0.7 \leg x \leg 0.8, 0.2 \leg y \leg 0.3)

Authors: J. Q. Li, Y. J. Song, H. X. Yang, Z. Wang, H. L. Shi, G. F. Chen, Z. W. Wang, Z. Chen, H. F. Tian

Abstract: The Fe-based superconducting KxFe2-ySe2 (0.6 {\leg} x {\leg} 1, 0.2{\leg} y {\leg} 0.4) compounds, unlike the well-known RFe2As2 (R = Ba, Sr, Ca) superconductors, contain complex structural features and notable physical properties, such as the Fe-vacancy ordering, multi-superconducting transitions and the phase separation[1]. Recent experimental studies also suggested the presence of remarkable in… ▽ More The Fe-based superconducting KxFe2-ySe2 (0.6 {\leg} x {\leg} 1, 0.2{\leg} y {\leg} 0.4) compounds, unlike the well-known RFe2As2 (R = Ba, Sr, Ca) superconductors, contain complex structural features and notable physical properties, such as the Fe-vacancy ordering, multi-superconducting transitions and the phase separation[1]. Recent experimental studies also suggested the presence of remarkable interplay among the Fe-vacancy order and the antiferromagnetic structure[2]. Here we demonstrate that the well-characterized superconducting KxFe2-ySe2 (0.6 {\leg} x {\leg} 0.8, 0.2 {\leg} x {\leg} 0.3) samples contain complex microstructure features and undergo successive phase transitions at low temperatures. In-situ TEM observations on a number of the KxFe2-ySe2 superconductors demonstrated the presence of a remarkable collapse of the Fe-vacancy order above the superconducting transition, as a result, the superconducting phase actually adopts a tetragonal structure without the Fe-vacancy ordering. Moreover, our analysis at the low temperatures suggests that the superconductors likely adopt a Fe-deficient structure with composition of K0.75Fe2-ySe2. These results are important not only for the further optimization of superconducting phase in present system but also for understanding the mechanism of the Fe-based superconductivity. △ Less

Submitted 28 April, 2011; originally announced April 2011.

Comments: 15 pages, 4 figures

Phase transition, superstructure and physical properties of K2Fe4Se5

Authors: Y. J. Song, Z. Wang, Z. W. Wang, H. L. Shi, Z. Chen, H. F. Tian, G. F. Chen, H. X. Yang, J. Q. Li

Abstract: The structural features and physical properties of the antiferromagnetic K0.8Fe1.6Se2 (so called K2Fe4Se5 phase) have been studied in the temperature range from 300K up to 600K. Resistivity measurements on both single crystal and polycrystalline samples reveal a semiconducting behavior. Structural investigations of K2Fe4Se5 by means of transmission electron microscopy and powder x-ray diffraction… ▽ More The structural features and physical properties of the antiferromagnetic K0.8Fe1.6Se2 (so called K2Fe4Se5 phase) have been studied in the temperature range from 300K up to 600K. Resistivity measurements on both single crystal and polycrystalline samples reveal a semiconducting behavior. Structural investigations of K2Fe4Se5 by means of transmission electron microscopy and powder x-ray diffraction demonstrate the presence of a well-defined superstructure within the a-b plane originating from a Fe-vacancy order along the [130] direction. Moreover, in-situ heating structural analysis shows that K0.8Fe1.6Se2 undergoes a transition of the Fe-vacancy order to disorder at about 600K. The phase separation and the Fe-vacancy ordering in the superconducting materials of KxFe2-ySe2 (0.2 \leq y \leq 0.3) has been briefly discussed. △ Less

Submitted 26 April, 2011; originally announced April 2011.

Comments: 17pages, 5 figures, 1 table

Microstructure and Fe-vacancy ordering in the KFexSe2 superconducting system

Authors: Z. Wang, Y. J. Song, H. L. Shi, Z. W. Wang, Z. Chen, H. F. Tian, G. F. Chen, J. G. Guo, H. X. Yang, J. Q. Li

Abstract: Structural investigations by means of transmission electron microscopy (TEM) on KFexSe2 with 1.5 \leq x \leq 1.8 have revealed a rich variety of microstructure phenomena, the KFe1.5Se2 crystal often shows a superstructure modulation along the [310] zone-axis direction, this superstructure can be well interpreted by the Fe-vacancy order within the a-b plane. Increase of Fe-concentration in the KFex… ▽ More Structural investigations by means of transmission electron microscopy (TEM) on KFexSe2 with 1.5 \leq x \leq 1.8 have revealed a rich variety of microstructure phenomena, the KFe1.5Se2 crystal often shows a superstructure modulation along the [310] zone-axis direction, this superstructure can be well interpreted by the Fe-vacancy order within the a-b plane. Increase of Fe-concentration in the KFexSe2 materials could not only result in the appearance of superconductivity but also yield clear alternations of microstructure. Structural inhomogeneity, the complex superstructures and defect structures in the superconducting KFe1.8Se2 sample have been investigated based on the high-resolution TEM. △ Less

Submitted 8 March, 2011; v1 submitted 11 January, 2011; originally announced January 2011.

Comments: 13 pages, 4 figures

Journal ref: Physical Review B (Vol.83, No.14)2011

Continuous metal-insulator transition of the antiferromagnetic perovskite NaOsO3

Authors: Y. G. Shi, Y. F. Guo, S. Yu, M. Arai, A. A. Belik, A. Sato, K. Yamaura, E. Takayama-Muromachi, H. F. Tian, H. X. Yang, J. Q. Li, T. Varga, J. F. Mitchell, S. Okamoto

Abstract: Newly synthesized perovskite NaOsO3 shows Curie-Weiss metallic nature at high temperature and suddenly goes into an antiferromagnetically insulating state at 410 K on cooling. Electronic specific heat at the low temperature limit is absent, indicating that the band gap fully opens. In situ observation in electron microscopy undetected any lattice anomalies in the vicinity of the transition tempe… ▽ More Newly synthesized perovskite NaOsO3 shows Curie-Weiss metallic nature at high temperature and suddenly goes into an antiferromagnetically insulating state at 410 K on cooling. Electronic specific heat at the low temperature limit is absent, indicating that the band gap fully opens. In situ observation in electron microscopy undetected any lattice anomalies in the vicinity of the transition temperature. It is most likely that the antiferromagnetic correlation plays an essential role of the gap opening. △ Less

Submitted 25 October, 2009; originally announced October 2009.

Comments: 13 pages, 5 figures, PHYS. REV. B 80, 161104(R),(2009)

Structural properties and superconductivity of SrFe2As2-xPx and CaFe2As2-yPy

Authors: H. L. Shi, H. X. Yang, H. F. Tian, J. B. Lu, Z. W. Wang, Y. B. Qin, Y. J. Song, J. Q. Li*

Abstract: The SrFe2As2-xPx and CaFe2As2-yPy materials were prepared by a solid state reaction method. X-ray diffraction measurements indicate the single-phase samples can be successfully obtained for SrFe2As2-xPx and CaFe2As2-yPy samples. Clear contraction of the lattice parameters are clearly determined due to the relatively smaller P ions substation for As. The SDW instability associated with tetragonal… ▽ More The SrFe2As2-xPx and CaFe2As2-yPy materials were prepared by a solid state reaction method. X-ray diffraction measurements indicate the single-phase samples can be successfully obtained for SrFe2As2-xPx and CaFe2As2-yPy samples. Clear contraction of the lattice parameters are clearly determined due to the relatively smaller P ions substation for As. The SDW instability associated with tetragonal to orthorhombic phase transition is suppressed visibly in both systems following with the increase of P contents. The highest superconducting transitions are respectively observed at about 27 K in SrFe2As1.3P0.7 and at about 13 K in CaFe2As1.7P0.3. △ Less

Submitted 25 September, 2009; originally announced September 2009.

Comments: 11 pages, 5 figures, 2 tables

Phase separation and ferroelectric ordering in charge frustrated LuFe2O4-x

Authors: H. X. Yang, H. F. Tian, Y. Zhang, Y. B. Qin, L. J. Zeng, C. Ma, H. L. Shi, J. B. Lu, J. Q. Li

Abstract: The transmission electron microscopy observations of the charge ordering (CO) which governs the electronic polarization in LuFe2O4-x clearly show the presence of a remarkable phase separation at low temperatures. Two CO ground states are found to adopt the charge modulations of Q1 = (1/3, 1/3, 0) and Q2 = (1/3 + y, 1/3 + y, 3/2), respectively. Our structural study demonstrates that the incommens… ▽ More The transmission electron microscopy observations of the charge ordering (CO) which governs the electronic polarization in LuFe2O4-x clearly show the presence of a remarkable phase separation at low temperatures. Two CO ground states are found to adopt the charge modulations of Q1 = (1/3, 1/3, 0) and Q2 = (1/3 + y, 1/3 + y, 3/2), respectively. Our structural study demonstrates that the incommensurately Q2-modulated state is chiefly stable in samples with relatively lower oxygen contents. Data from theoretical simulations of the diffraction suggest that both Q1- and Q2-modulated phases have ferroelectric ordering. The effects of oxygen concentration on the phase separation and electric polarization in this layered system are discussed. △ Less

Submitted 8 September, 2009; originally announced September 2009.

Comments: 11 pages, 5 figures

Structural features and tetragonal-orthorhombic phase transition in SrFe2As2 and CaFe2As2

Authors: C. Ma, H. X. Yang, H. F. Tian, H. L Shi, J. B. Lu, Z. W. Wang, L. J. Zeng, G. F. Chen, N. L. Wang, J. Q. Li

Abstract: The structural properties of the SrFe2As2 and CaFe2As2 compounds have been extensively analyzed by transmission electron microscopy (TEM) from room temperature down to 20K. The experimental results demonstrate that the SrFe2As2 crystal, in consistence with previous x-ray data, has a tetragonal structure at room temperature and undergoes a tetragonal (T)-orthorhombic (O) phase transition at about… ▽ More The structural properties of the SrFe2As2 and CaFe2As2 compounds have been extensively analyzed by transmission electron microscopy (TEM) from room temperature down to 20K. The experimental results demonstrate that the SrFe2As2 crystal, in consistence with previous x-ray data, has a tetragonal structure at room temperature and undergoes a tetragonal (T)-orthorhombic (O) phase transition at about 210K. Moreover, twinning lamella arising from T-O transition evidently appears in the orthorhombic phase. On the other hand, TEM observations of CaFe2As2 reveal the presence of a pseudo-periodic structural modulation with the periodicity of around 40nm at room temperature. This modulation is likely in connection with the local structural distortions within the Ca layer. In-situ cooling TEM observations of CaFe2As2 reveal the presence of complex domain structures in the low-temperature orthorhombic phase. △ Less

Submitted 21 November, 2008; v1 submitted 20 November, 2008; originally announced November 2008.

Comments: 19 pages, 8 figures

Nonlinear current-voltage behavior and electrically driven phase transition in charge frustrated LuFe2O4

Authors: L. J. Zeng, H. X. Yang, Y. Zhang, H. F. Tian, C. Ma, Y. B. Qin, Y. G. Zhao, J. Q. Li

Abstract: Electric transport measurements of the charge frustrated LuFe2O4, in which the charge ordering (CO) and electronic ferroelectricity are found, reveal strong nonlinear electric conduction upon application of electrical field in both single crystalline and polycrystalline samples. The threshold electric fields (Et) in single crystalline LuFe2O4 are estimated respectively to be about 60V/cm and 10V… ▽ More Electric transport measurements of the charge frustrated LuFe2O4, in which the charge ordering (CO) and electronic ferroelectricity are found, reveal strong nonlinear electric conduction upon application of electrical field in both single crystalline and polycrystalline samples. The threshold electric fields (Et) in single crystalline LuFe2O4 are estimated respectively to be about 60V/cm and 10V/cm with E parallel and perpendicular to the c-axis direction. Experimental measurements also demonstrate that the I-V nonlinearity increases quickly with lowering temperature. Furthermore, our in-situ TEM investigations evidently reveal that the nonlinear I-V behavior is intrinsically in correlation with a current driven charge ordering insulator-metal transition, and the applied electrical field triggers a visible CO collapse recognizable as the fading of satellite spots of the CO modulations. △ Less

Submitted 10 June, 2008; originally announced June 2008.