-
Coherent Erbium Spin Defects in Colloidal Nanocrystal Hosts
Authors:
Joeson Wong,
Mykyta Onizhuk,
Jonah Nagura,
Arashdeep S. Thind,
Jasleen K. Bindra,
Christina Wicker,
Gregory D. Grant,
Yuxuan Zhang,
Jens Niklas,
Oleg G. Poluektov,
Robert F. Klie,
Jiefei Zhang,
Giulia Galli,
F. Joseph Heremans,
David D. Awschalom,
A. Paul Alivisatos
Abstract:
We demonstrate nearly a microsecond of spin coherence in Er3+ ions doped in cerium dioxide nanocrystal hosts, despite a large gyromagnetic ratio and nanometric proximity of the spin defect to the nanocrystal surface. The long spin coherence is enabled by reducing the dopant density below the instantaneous diffusion limit in a nuclear spin-free host material, reaching the limit of a single erbium s…
▽ More
We demonstrate nearly a microsecond of spin coherence in Er3+ ions doped in cerium dioxide nanocrystal hosts, despite a large gyromagnetic ratio and nanometric proximity of the spin defect to the nanocrystal surface. The long spin coherence is enabled by reducing the dopant density below the instantaneous diffusion limit in a nuclear spin-free host material, reaching the limit of a single erbium spin defect per nanocrystal. We observe a large Orbach energy in a highly symmetric cubic site, further protecting the coherence in a qubit that would otherwise rapidly decohere. Spatially correlated electron spectroscopy measurements reveal the presence of Ce3+ at the nanocrystal surface that likely acts as extraneous paramagnetic spin noise. Even with these factors, defect-embedded nanocrystal hosts show tremendous promise for quantum sensing and quantum communication applications, with multiple avenues, including core-shell fabrication, redox tuning of oxygen vacancies, and organic surfactant modification, available to further enhance their spin coherence and functionality in the future.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Formation of Mn-rich interfacial phases in Co2FexMn1-xSi thin films
Authors:
Ka Ming Law,
Arashdeep S. Thind,
Mihir Pendharkar,
Sahil J. Patel,
Joshua J. Phillips,
Chris J. Palmstrom,
Jaume Gazquez,
Albina Borisevich,
Rohan Mishra,
Adam J. Hauser
Abstract:
We report the formation of Mn-rich regions at the interface of Co2FexMn1-xSi thin films grown on GaAs substrates by molecular beam epitaxy (MBE). Scanning transmission electron microscopy (STEM) with electron energy loss (EEL) spectrum imaging reveals that each interfacial region: (1) is 1-2 nm wide, (2) occurs irrespective of the Fe/Mn composition ratio and in both Co-rich and Co-poor films, and…
▽ More
We report the formation of Mn-rich regions at the interface of Co2FexMn1-xSi thin films grown on GaAs substrates by molecular beam epitaxy (MBE). Scanning transmission electron microscopy (STEM) with electron energy loss (EEL) spectrum imaging reveals that each interfacial region: (1) is 1-2 nm wide, (2) occurs irrespective of the Fe/Mn composition ratio and in both Co-rich and Co-poor films, and (3) displaces both Co and Fe indiscriminately. We also observe a Mn-depleted region in each film directly above each Mn-rich interfacial layer, roughly 3 nm in width in the x = 0 and x = 0.3 films, and 1 nm in the x = 0.7 (less Mn) film. We posit that growth energetics favor Mn diffusion to the interface even when there is no significant Ga interdiffusion into the epitaxial film. Element-specific X-ray magnetic circular dichroism (XMCD) measurements show larger Co, Fe, and Mn orbital to spin magnetic moment ratios compared to bulk values across the Co2FexMn1-xSi compositional range. The values lie between reported values for pure bulk and nanostructured Co, Fe, and Mn materials, corroborating the non-uniform, layered nature of the material on the nanoscale. Finally, SQUID magnetometry demonstrates that the films deviate from the Slater-Pauling rule for uniform films of both the expected and the measured composition. The results inform a need for care and increased scrutiny when forming Mn-based magnetic thin films on III-V semiconductors like GaAs, particularly when films are on the order of 5 nm or when interface composition is critical to spin transport or other device applications.
△ Less
Submitted 24 December, 2023;
originally announced December 2023.
-
Polymorphism in Ruddlesden-Popper $La_{3}Ni_{2}O_{7}$: Discovery of a Hidden Phase with Distinctive Layer Stacking
Authors:
Xinglong Chen,
Junjie Zhang,
A. S. Thind,
S. Sharma,
H. LaBollita,
G. Peterson,
H. Zheng,
D. Phelan,
A. S. Botana,
R. F. Klie,
J. F. Mitchell
Abstract:
We report the discovery of a novel form of Ruddlesden-Popper (RP) oxide, which stands as the first example of long-range, coherent polymorphism in this class of inorganic solids. Rather than the well-known, uniform stacking of perovskite blocks ubiquitously found in RP phases, this newly discovered polymorph of the bilayer RP phase $La_{3}Ni_{2}O_{7}$adopts a novel stacking sequence in which singl…
▽ More
We report the discovery of a novel form of Ruddlesden-Popper (RP) oxide, which stands as the first example of long-range, coherent polymorphism in this class of inorganic solids. Rather than the well-known, uniform stacking of perovskite blocks ubiquitously found in RP phases, this newly discovered polymorph of the bilayer RP phase $La_{3}Ni_{2}O_{7}$adopts a novel stacking sequence in which single and trilayer blocks of $NiO_{6}$ octahedra alternate in a 1313 sequence. Crystals of this new polymorph are described in space group Cmmm, although we note evidence for a competing Imcm variant. Transport measurements at ambient pressure reveal metallic character with evidence of a charge density wave transition with onset at T = 134 K, which lies intermediate between that of the standard 2222 polymorph of $La_{3}Ni_{2}O_{7}$ (space group Amam) and the trilayer RP phase, $La_{4}Ni_{3}O_{10}$. The discovery of such polymorphism could reverberate to the expansive range of science and applications that rely on RP materials, particularly the recently reported signatures of superconductivity with $T_{c}$ as high as 80 K above 14 GPa in bilayer $La_{3}Ni_{2}O_{7}$.
△ Less
Submitted 10 December, 2023;
originally announced December 2023.
-
Giant Modulation of Refractive Index from Picoscale Atomic Displacements
Authors:
Boyang Zhao,
Guodong Ren,
Hongyan Mei,
Vincent C. Wu,
Shantanu Singh,
Gwan-Yeong Jung,
Huandong Chen,
Raynald Giovine,
Shanyuan Niu,
Arashdeep S. Thind,
Jad Salman,
Nick S. Settineri,
Bryan C. Chakoumakos,
Michael E. Manley,
Raphael P. Hermann,
Andrew R. Lupini,
Miaofang Chi,
Jordan A. Hachtel,
Arkadiy Simonov,
Simon J. Teat,
Raphaële J. Clément,
Mikhail A. Kats,
J. Ravichandran,
Rohan Mishra
Abstract:
Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the…
▽ More
Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the refractive index tensor and resulting in the giant optical anisotropy observed in BaTiS$_3$, a quasi-one-dimensional hexagonal chalcogenide. Single crystal X-ray diffraction studies reveal the presence of antipolar displacements of Ti atoms within adjacent TiS$_6$ chains along the c-axis, and three-fold degenerate Ti displacements in the a-b plane. $^{47/49}$Ti solid-state NMR provides additional evidence for those Ti displacements in the form of a three-horned NMR lineshape resulting from a low symmetry local environment around Ti atoms. We used scanning transmission electron microscopy to directly observe the globally disordered Ti a-b plane displacements and find them to be ordered locally over a few unit cells. First-principles calculations show that the Ti a-b plane displacements selectively reduce the refractive index along the ab-plane, while having minimal impact on the refractive index along the chain direction, thus resulting in a giant enhancement in the optical anisotropy. By showing a strong connection between structural disorder with picoscale displacements and the optical response in BaTiS$_3$, this study opens a pathway for designing optical materials with high refractive index and functionalities such as large optical anisotropy and nonlinearity.
△ Less
Submitted 19 March, 2024; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Duality of switching mechanisms and transient negative capacitance in improper ferroelectrics
Authors:
Xin Li,
Yu Yun,
Pratyush Buragohain,
Arashdeep Singh Thind,
Donald A. Walko,
Detian Yang,
Rohan Mishra,
Alexei Gruverman,
Xiaoshan Xu
Abstract:
The recent discovery of transient negative capacitance has sparked an intense debate on the role of homogeneous and inhomogeneous mechanisms in polarizations switching. In this work, we report observation of transient negative capacitance in improper ferroelectric h-YbFeO3 films in a resistor-capacitor circuit, and a concaved shape of anomaly in the voltage wave form, in the early and late stage o…
▽ More
The recent discovery of transient negative capacitance has sparked an intense debate on the role of homogeneous and inhomogeneous mechanisms in polarizations switching. In this work, we report observation of transient negative capacitance in improper ferroelectric h-YbFeO3 films in a resistor-capacitor circuit, and a concaved shape of anomaly in the voltage wave form, in the early and late stage of the polarizations switching respectively. Using a phenomenological model, we show that the early-stage negative capacitance is likely due to the inhomogeneous switching involving nucleation and domain wall motion, while the anomaly at the late stage, which appears to be a reminiscent negative capacitance is the manifestation of the thermodynamically unstable part of the free-energy landscape in the homogeneous switching. The complex free-energy landscape in hexagonal ferrites may be the key to cause the abrupt change in polarization switching speed and the corresponding anomaly. These results reconcile the two seemingly conflicting mechanisms in the polarization switching and highlight their different roles at different stages. The unique energy-landscape in hexagonal ferrites that reveals the dual switching mechanism suggests the promising application potential in terms of negative capacitance.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Colossal optical anisotropy from atomic-scale modulations
Authors:
Hongyan Mei,
Guodong Ren,
Boyang Zhao,
Jad Salman,
Gwan Yeong Jung,
Huandong Chen,
Shantanu Singh,
Arashdeep S. Thind,
John Cavin,
Jordan A. Hachtel,
Miaofang Chi,
Shanyuan Niu,
Graham Joe,
Chenghao Wan,
Nick Settineri,
Simon J. Teat,
Bryan C. Chakoumakos,
Jayakanth Ravichandran,
Rohan Mishra,
Mikhail A. Kats
Abstract:
In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface pol…
▽ More
In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface polaritons and hyperbolic phonon polaritons. Layered "van der Waals" materials, with strong intra-layer bonding and weak inter-layer bonding, can feature some of the largest optical anisotropy; however, their use in most optical systems is limited because their optic axis is out of the plane of the layers and the layers are weakly attached, making the anisotropy hard to access. Here, we demonstrate that a bulk crystal with subtle periodic modulations in its structure -- Sr9/8TiS3 -- is transparent and positive-uniaxial, with extraordinary index n_e = 4.5 and ordinary index n_o = 2.4 in the mid- to far-infrared. The excess Sr, compared to stoichiometric SrTiS3, results in the formation of TiS6 trigonal-prismatic units that break the infinite chains of face-shared TiS6 octahedra in SrTiS3 into periodic blocks of five TiS6 octahedral units. The additional electrons introduced by the excess Sr subsequently occupy the TiS6 octahedral blocks to form highly oriented and polarizable electron clouds, which selectively boost the extraordinary index n_e and result in record birefringence (Δn > 2.1 with low loss). The connection between subtle structural modulations and large changes in refractive index suggests new categories of anisotropic materials and also tunable optical materials with large refractive-index modulation and low optical losses.
△ Less
Submitted 21 July, 2023; v1 submitted 28 February, 2023;
originally announced March 2023.
-
Epitaxial Thin Films of a Chalcogenide Perovskite
Authors:
Mythili Surendran,
Huandong Chen,
Boyang Zhao,
Arashdeep Singh Thind,
Shantanu Singh,
Thomas Orvis,
Huan Zhao,
Jae-Kyung Han,
Han Htoon,
Megumi Kawasaki,
Rohan Mishra,
Jayakanth Ravichandran
Abstract:
Chalcogenide perovskites have emerged as a new class of electronic materials, but fundamental properties and applications of chalcogenide perovskites remain limited by the lack of high quality epitaxial thin films. We report epitaxial thin film growth of BaZrS3, a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out of plane…
▽ More
Chalcogenide perovskites have emerged as a new class of electronic materials, but fundamental properties and applications of chalcogenide perovskites remain limited by the lack of high quality epitaxial thin films. We report epitaxial thin film growth of BaZrS3, a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out of plane and have a clear in-plane epitaxial relationship with the substrate. Electron microscopy studies confirm the presence of epitaxy for the first few layers of the film at the interface, even though away from the interface the films are polycrystalline with a large number of extended defects suggesting the potential for further improvement in growth. X-Ray reflectivity and atomic force microscopy show smooth film surfaces and interfaces between the substrate and the film. The films show strong light absorption near the band edge and photoluminescence in the visible region. The photodetector devices show fast and efficient photo response with the highest ON/OFF ratio reported for BaZrS3 films thus far. Our study opens up opportunities to realize epitaxial thin films, heterostructures, and superlattices of chalcogenide perovskites to probe fundamental physical phenomena and the resultant electronic and photonic device technologies.
△ Less
Submitted 24 May, 2021;
originally announced May 2021.
-
Magnetoelectric coupling and decoupling in multiferroic hexagonal YbFeO3 thin films
Authors:
Yu Yun,
Xin Li,
Arashdeep Singh Thind,
Yuewei Yin,
Hao Liu,
Qiang Li,
Wenbin Wang,
Alpha T. N Diaye,
Corbyn Mellinger,
Xuanyuan Jiang,
Rohan Mishra,
Xiaoshan Xu
Abstract:
The coupling between ferroelectric and magnetic orders in multiferroic materials and the nature of magnetoelectric (ME) effects are enduring experimental challenges. In this work, we have studied the response of magnetization to ferroelectric switching in thin-film hexagonal YbFeO3, a prototypical improper multiferroic. The bulk ME decoupling and potential domain-wall ME coupling were revealed usi…
▽ More
The coupling between ferroelectric and magnetic orders in multiferroic materials and the nature of magnetoelectric (ME) effects are enduring experimental challenges. In this work, we have studied the response of magnetization to ferroelectric switching in thin-film hexagonal YbFeO3, a prototypical improper multiferroic. The bulk ME decoupling and potential domain-wall ME coupling were revealed using x-ray magnetic circular dichroism (XMCD) measurements with in-situ ferroelectric polarization switching. Our Landau theory analysis suggests that the bulk ME-coupled ferroelectric switching path has a higher energy barrier than that of the ME-decoupled path; this extra barrier energy is also too high to be reduced by the magneto-static energy in the process of breaking single magnetic domains into multi-domains. In addition, the reduction of magnetization around the ferroelectric domain walls predicted by the Landau theory may induce the domain-wall ME coupling in which the magnetization is correlated with the density of ferroelectric domain walls. These results provide important experimental evidence and theoretical insights into the rich possibilities of ME couplings in hexagonal ferrites, such as manipulating the magnetic states by an electric field.
△ Less
Submitted 13 November, 2020;
originally announced November 2020.
-
Stochastic Replica Voting Machine Prediction of Stable Cubic and Double Perovskite Materials and Binary Alloys
Authors:
T. Mazaheri,
Bo Sun,
J. Scher-Zagier,
A. S. Thind,
D. Magee,
P. Ronhovde,
T. Lookman,
R. Mishra,
Z. Nussinov
Abstract:
A machine learning approach that we term the `Stochastic Replica Voting Machine' (SRVM) algorithm is presented and applied to a binary and a 3-class classification problems in materials science. Here, we employ SRVM to predict candidate compounds capable of forming stable perovskites and double perovskites and further classify binary ($AB$) solids. The results of our binary and ternary classificat…
▽ More
A machine learning approach that we term the `Stochastic Replica Voting Machine' (SRVM) algorithm is presented and applied to a binary and a 3-class classification problems in materials science. Here, we employ SRVM to predict candidate compounds capable of forming stable perovskites and double perovskites and further classify binary ($AB$) solids. The results of our binary and ternary classifications compared well to those obtained by SVM and neural network algorithms.
△ Less
Submitted 1 April, 2019; v1 submitted 23 May, 2017;
originally announced May 2017.