-
Modulation of the Octahedral Structure and Potential Superconductivity of La3Ni2O7 at Ambient Pressure by Compressive Strain
Authors:
Zihao Huo,
Peng Zhang,
Aiqin Yang,
Zhengtao Liu,
Xiangru Tao,
Zihan Zhang,
Qiwen Jiang,
Wenxuan Chen,
Defang Duan,
Tian Cui
Abstract:
Superconductivity at Tc = 80 K has recently been reported above 14 GPa in La3Ni2O7, which thus introduces a new family of high-temperature superconductors. Using a first-principles calculation with Coulomb repulsion, we unveil a surprising new route to obtain superconductivity in La3Ni2O7 at ambient pressure by introducing compressive strain along the [001] direction. The shape of the NiO6 octahed…
▽ More
Superconductivity at Tc = 80 K has recently been reported above 14 GPa in La3Ni2O7, which thus introduces a new family of high-temperature superconductors. Using a first-principles calculation with Coulomb repulsion, we unveil a surprising new route to obtain superconductivity in La3Ni2O7 at ambient pressure by introducing compressive strain along the [001] direction. The shape of the NiO6 octahedra affect the Ni-3dz2 density of states (DOS) at Fermi level, and it can be modulated by applying compressive strain instead of hydrostatic pressure. Notably, when the octahedral regularity parameter defined herein is R ~ 4%, La3Ni2O7 acquires a high Ni-3dz2 DOS and hole Fermi pocket. Our study thus indicates a path for obtaining superconductivity in La3Ni2O7 at ambient pressure and elucidates the relationship between structural properties and superconductivity.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Discovery of superconductivity in technetium-borides at moderate pressures
Authors:
Xiangru Tao,
Aiqin Yang,
Yundi Quan,
Biao Wan,
Shuxiang Yang,
Peng Zhang
Abstract:
Advances in theoretical calculations boosted the searches for high temperature superconductors, such as sulfur hydrides and rare-earth polyhydrides. However, the required extremely high pressures for stabilizing these superconductors handicapped further implementations. Based upon thorough structural searches, we identified series of unprecedented superconducting technetium-borides at moderate pre…
▽ More
Advances in theoretical calculations boosted the searches for high temperature superconductors, such as sulfur hydrides and rare-earth polyhydrides. However, the required extremely high pressures for stabilizing these superconductors handicapped further implementations. Based upon thorough structural searches, we identified series of unprecedented superconducting technetium-borides at moderate pressures, including TcB (P6$_3$/mmc) with superconducting transition temperature $T_{\text{c}}$ = 20.2 K at ambient pressure and TcB$_2$ (P6/mmm) with $T_{\text{c}}$ = 23.1 K at 20 GPa. Superconductivity in these technetium-borides mainly originates from the coupling between the low frequency vibrations of technetium-atoms and the dominant technetium-4d electrons at the Fermi level. Our works therefore present a fresh group in the family of superconducting borides, whose diversified crystal structures suggest rich possibilities in discovery of other superconducting transition-metal-borides.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Thermal transport in a 2D amorphous material
Authors:
Yuxi Wang,
Xingxing Zhang,
Wujuan Yan,
Nianjie Liang,
Haiyu He,
Xinwei Tao,
Ang Li,
Fuwei Yang,
Buxuan Li,
Te-Huan Liu,
Jia Zhu,
Wu Zhou,
Wei Wang,
Lin Zhou,
Bai Song
Abstract:
Two-dimensional (2D) crystals proved revolutionary soon after graphene was discovered in 2004. However, 2D amorphous materials only became accessible in 2020 and remain largely unexplored. In particular, the thermophysical properties of amorphous materials are of great interest upon transition from 3D to 2D. Here, we probe thermal transport in 2D amorphous carbon. A cross-plane thermal conductivit…
▽ More
Two-dimensional (2D) crystals proved revolutionary soon after graphene was discovered in 2004. However, 2D amorphous materials only became accessible in 2020 and remain largely unexplored. In particular, the thermophysical properties of amorphous materials are of great interest upon transition from 3D to 2D. Here, we probe thermal transport in 2D amorphous carbon. A cross-plane thermal conductivity ($κ$) down to 0.079 $\rm{Wm}^{-1}K^{-1}$ is measured for van der Waals stacked multilayers at room temperature, which is among the lowest reported to date. Meanwhile, an unexpectedly high in-plane $κ$ is obtained for freestanding monolayers which is a few times larger than what is predicted by conventional wisdom for 3D amorphous carbon with similar $\rm{sp}^{2}$ fraction. Our molecular dynamics simulations reveal the role of disorder and highlight the impact of dimensionality. Amorphous materials at the 2D limit open up new avenues for understanding and manipulating heat at the atomic scale.
△ Less
Submitted 22 March, 2024; v1 submitted 20 February, 2024;
originally announced February 2024.
-
Two-dimensional ferromagnetic semiconductor Cr2XP: First-principles calculations and Monte Carlo simulations
Authors:
Xiao-** Wei,
Lan-Lan Du,
Jiang-Liu Meng,
Xiaoma Tao
Abstract:
According to the Mermin Wagner theorem, two-dimensional material is difficult to have the Curie temperature above room temperature. By using the method of band engineering, we design a promising two-dimensional ferromagnetic semiconductor Cr2XP (X=P, As, Sb) with large magnetization, high Curie temperature and sizable band gap. The formation of gap is discussed in terms of the hybridizations, occu…
▽ More
According to the Mermin Wagner theorem, two-dimensional material is difficult to have the Curie temperature above room temperature. By using the method of band engineering, we design a promising two-dimensional ferromagnetic semiconductor Cr2XP (X=P, As, Sb) with large magnetization, high Curie temperature and sizable band gap. The formation of gap is discussed in terms of the hybridizations, occupation and distribution of electronic states and charge transfer. Large magnetic moments about 6.16~6.37uB origin from the occupation of Cr-d electrons in crystal field.Competition and cooperation between d-d (Cr-d~Cr-d) and d-p-d (Cr-d~X-p~Cr-d) exchange interactions lead to the emergence of ferromagnetic ordering phase. Furthermore, Curie temperatures, approaching to 269 K, 332 K and 400 K for Cr2P2, Cr2AsP and Cr2SbP, are estimated by employing Monte Carlo simulation based on the Heisenberg model. Magnetic anisotropy energy of Cr2XP is determined by calculating the total energy dependence on the angle along different directions, and the origin is also discussed by the second-order perturbation theory. In addition, the Cr2XP possesses excellent thermodynamical, dynamical and mechanical stabilities, and can overcome their own gravity to keep their planar structure without the support of substrate. These above-mentioned advantages will offer some valuable hints for two-dimensional ferromagnetic semiconductor Cr2XP in spintronic devices.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Design and synthesis of three-dimensional hybrid Ruddlesden-Popper nickelate single crystals
Authors:
Feiyu Li,
Ning Guo,
Qiang Zheng,
Yang Shen,
Shilei Wang,
Qihui Cui,
Chao Liu,
Shanpeng Wang,
Xutang Tao,
Guang-Ming Zhang,
Junjie Zhang
Abstract:
Advancement of technologies relies on discovery of new materials with emerging physical properties that are determined by their crystal structures. Ruddlesden-Popper (R-P) phases with formula of $A_{n+1}$$B_n$$X_{3n+1}$ (n=1,2,3...) are among one of the most widely studied class of materials due to their electrical, optical, magnetic, thermal properties and their combined multifunctional propertie…
▽ More
Advancement of technologies relies on discovery of new materials with emerging physical properties that are determined by their crystal structures. Ruddlesden-Popper (R-P) phases with formula of $A_{n+1}$$B_n$$X_{3n+1}$ (n=1,2,3...) are among one of the most widely studied class of materials due to their electrical, optical, magnetic, thermal properties and their combined multifunctional properties(Ref.1-6). In R-P phases, intergrowth is well-known in the short range(Ref.7-9); however, no existing compounds have been reported to have different n mixed in bulk single crystals. Here we design a hybrid R-P nickelate $La_2NiO_4$$La_3Ni_2O_7$ by alternatively stacking bilayers, which is the active structural motif in the newly discovery high-$T_c$ superconductor $La_3Ni_2O_7$ and single layers of the antiferromagnetic insulator $La_2NiO_4$. We report the successful synthesis of $La_2NiO_4$$La_3Ni_2O_7$ single crystals, and X-ray diffraction and real-space imaging vis STEM show that the crystal structure consists of single layers and bilayers of $NiO_6$ octahedral stacking alternatively perpendicular to the ab plane, characterized by the orthorhombic Immm (No.71) space group. Resistivity measurements indicate a peculiar insulator-to-metal transition around 140 K on cooling. Correlated density functional theory calculations corroborate this finding, and reveal that the single layer becomes paramagnetic metallic due to charge transfer via LaO layers. The discovery of $La_2NiO_4$$La_3Ni_2O_7$ opens a door to access a completely new family of 3D hybrid R-P phases with the formula of $A_{n+1}$$B_n$$X_{3n+1}$$A'_{m+1}$$B'_m$$X'_{3m+1}$ which potentially host a plethora of emerging physical properties for various applications.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Crystal structures and high-temperature superconductivity in molybdenum-hydrogen binary system under high pressure
Authors:
Aiqin Yang,
Xiangru Tao,
Yundi Quan,
Peng Zhang
Abstract:
Motivated by advances in hydrogen-rich superconductors in the past decades, we conducted variable-composition structural searches in Mo-H binary system at high pressure. A new composition-pressure phase diagram of thermodynamically stable structures has been derived. Besides all previously discovered superconducting molybdenum hydrides, we also identified series of thermodynamically metastable sup…
▽ More
Motivated by advances in hydrogen-rich superconductors in the past decades, we conducted variable-composition structural searches in Mo-H binary system at high pressure. A new composition-pressure phase diagram of thermodynamically stable structures has been derived. Besides all previously discovered superconducting molybdenum hydrides, we also identified series of thermodynamically metastable superconducting structures, including I4/mmm-Mo$_3$H$_{14}$, I4cm-MoH$_9$, P4/nmm-MoH$_{10}$ and P42$_1$2-MoH$_{10}$, with the superconducting transition temperatures from 55 to 126 K at 300 GPa. In these superconducting molybdenum hydrides, vibrations of the Mo-atoms contributes significantly to the electron-phonon coupling and the superconducting transition temperature, in complementary to the contributions by the vibrations of the H-atoms. Our works highlight the importance of compounds with non-integer composition ratio and metastable states in material searches, for example the potential high temperature superconductors.
△ Less
Submitted 23 July, 2023;
originally announced July 2023.
-
A first-principles investigation of the origin of superconductivity in TlBi$_2$
Authors:
Aiqin Yang,
Xiangru Tao,
Yundi Quan,
Peng Zhang
Abstract:
The intermetallic compound TlBi$_2$ crystallizes in the MgB$_2$ structure and becomes superconducting below 6.2 K. Considering that both Tl and Bi have heavy atomic masses, it is puzzling why TlBi$_2$ is a conventional phonon-mediated superconductor. We have performed comprehensive first-principles calculations of the electronic structures, the phonon dispersions and the electron-phonon couplings…
▽ More
The intermetallic compound TlBi$_2$ crystallizes in the MgB$_2$ structure and becomes superconducting below 6.2 K. Considering that both Tl and Bi have heavy atomic masses, it is puzzling why TlBi$_2$ is a conventional phonon-mediated superconductor. We have performed comprehensive first-principles calculations of the electronic structures, the phonon dispersions and the electron-phonon couplings for TlBi$_2$. The $6p$ orbitals of bismuth dominate over the states near the Fermi level, forming strong intra-layer $p_{x/y}$ and inter-layer $p_z$ $σ$ bonds which is known to have strong electron-phonon coupling. In addition, the large spin-orbit coupling interaction in TlBi$_2$ increases its electron-phonon coupling constant significantly. As a result, TlBi$_2$, with a logarithmic phonon frequency average one tenth that of MgB$_2$, is a phonon-mediated superconductor.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Leading components and pressure-induced color changes in N-doped lutetium hydride
Authors:
Xiangru Tao,
Aiqin Yang,
Shuxiang Yang,
Yundi Quan,
Peng Zhang
Abstract:
Recent experimental study by Dias {\it et al.} claims to have discovered room-temperature superconductivity in lutetium-nitrogen-hydrogen system at 1 GPa [Nature 615, 244 (2023)], which sheds light on the long-held dream of ambient superconductivity. However, all follow-up experiments found no evidence of superconductivity. The compositions and the crystal structures of the lutetium-nitrogen-hydro…
▽ More
Recent experimental study by Dias {\it et al.} claims to have discovered room-temperature superconductivity in lutetium-nitrogen-hydrogen system at 1 GPa [Nature 615, 244 (2023)], which sheds light on the long-held dream of ambient superconductivity. However, all follow-up experiments found no evidence of superconductivity. The compositions and the crystal structures of the lutetium-nitrogen-hydrogen system remain unknown. By employing the density functional theory based structure prediction algorithm, we suggest that in lutetium-nitrogen-hydrogen the major component is LuH$_2$ (Fm$\bar{3}$m), together with minor LuN (Fm$\bar{3}$m). The blue LuH$_2$ at ambient pressure will turn into purple and red color at higher pressures, possibly accompanied by the formation of vacancies at hydrogen-sites. In LuH$_2$ and LuN, the density of states at the Fermi level is dominated by the Lu-5d orbitals, while those from hydrogen and nitrogen are very small, leading to the absence of superconductivity in these two compounds. Nitrogen-do** to LuH$_2$ fails to enhance the superconductivity as well. In this work, we identify the leading components in N-doped lutetium hydride, explain its intriguing color changes under pressure, and elucidate why superconductivity is absent in the follow-up experiments.
△ Less
Submitted 13 June, 2023; v1 submitted 18 April, 2023;
originally announced April 2023.
-
Ionic liquid-electrode interface: classification of ions, saturation of layers, and structure-determined potentials
Authors:
Karl Karu,
Eva Roos Nerut,
Xueran Tao,
Sergei A. Kislenko,
Kaija Pohako-Esko,
Iuliia V. Voroshylova,
Vladislav B. Ivaništšev
Abstract:
Progress in electrochemical applications of ionic liquids builds on an understanding of electrical double-layer. This computational study focuses on structure-determined quantities -- maximum packing density, potentials and capacitances -- evaluated using a one-electrode electrical double-layer model. Interfaces of 40 studied ions are grouped into four distinct classes according to their character…
▽ More
Progress in electrochemical applications of ionic liquids builds on an understanding of electrical double-layer. This computational study focuses on structure-determined quantities -- maximum packing density, potentials and capacitances -- evaluated using a one-electrode electrical double-layer model. Interfaces of 40 studied ions are grouped into four distinct classes according to their characteristic packing at the model surface. The simulations suggest that the exact screening by a monolayer of counter-ions (preceding the crowding of ions) is unlikely for common ions within the electrochemical stability window of corresponding ionic liquids. This work discusses how the assessed structure-determined quantities can guide the experimental tuning of (electro/mechano)chemical properties and characterising the structure of ionic liquid-electrode interfaces.
△ Less
Submitted 15 May, 2024; v1 submitted 31 January, 2023;
originally announced February 2023.
-
Equilibrium-nonequilibrium ring-polymer molecular dynamics for nonlinear spectroscopy
Authors:
Tomislav Begušić,
Xuecheng Tao,
Geoffrey A. Blake,
Thomas F. Miller III
Abstract:
Two-dimensional Raman and hybrid terahertz/Raman spectroscopic techniques provide invaluable insight into molecular structure and dynamics of condensed-phase systems. However, corroborating experimental results with theory is difficult due to the high computational cost of incorporating quantum-mechanical effects in the simulations. Here, we present the equilibrium-nonequilibrium ring-polymer mole…
▽ More
Two-dimensional Raman and hybrid terahertz/Raman spectroscopic techniques provide invaluable insight into molecular structure and dynamics of condensed-phase systems. However, corroborating experimental results with theory is difficult due to the high computational cost of incorporating quantum-mechanical effects in the simulations. Here, we present the equilibrium-nonequilibrium ring-polymer molecular dynamics (RPMD), a practical computational method that can account for nuclear quantum effects on the two-time response function of nonlinear optical spectroscopy. Unlike a recently developed approach based on the double Kubo transformed (DKT) correlation function, our method is exact in the classical limit, where it reduces to the established equilibrium-nonequilibrium classical molecular dynamics method. Using benchmark model calculations, we demonstrate the advantages of the equilibrium-nonequilibrium RPMD over classical and DKT-based approaches. Importantly, its derivation, which is based on the nonequilibrium RPMD, obviates the need for identifying an appropriate Kubo transformed correlation function and paves the way for applying real-time path-integral techniques to multidimensional spectroscopy.
△ Less
Submitted 15 March, 2022; v1 submitted 2 February, 2022;
originally announced February 2022.
-
Metallic nature and site-selective magnetic collapse in iron oxide Fe4O5 at the extreme conditions of Earth's deep interior
Authors:
Aiqin Yang,
Qiaoying Qin,
Xiangru Tao,
Shengli Zhang,
Yongtao Zhao,
Peng Zhang
Abstract:
Properties of iron oxides at the extreme conditions are of essential importance in condensed matter physics and Geophysics. The recent discovery of a new type of iron oxide, Fe4O5, at high pressure and high temperature of Earth's deep interior attracts great interests. In this paper, we report the electronic structure and the magnetic properties of Fe4O5 predicted by the density functional theory…
▽ More
Properties of iron oxides at the extreme conditions are of essential importance in condensed matter physics and Geophysics. The recent discovery of a new type of iron oxide, Fe4O5, at high pressure and high temperature of Earth's deep interior attracts great interests. In this paper, we report the electronic structure and the magnetic properties of Fe4O5 predicted by the density functional theory plus dynamic mean field theory (DFT+DMFT) approach. We find that Fe4O5 stays metallic from ambient pressure to high pressure. The magnetic moments of iron atoms at the three different crystallographic positions of Fe4O5 undergo position-dependent collapse as being compressed. Such site-selective magnetic moment collapse originates from the shift of energy levels and the consequent charge transfer among the Fe-3d orbits under compression.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
Site-selective magnetic moment collapse in compressed Fe5O6
Authors:
Qiao-Ying Qin,
Ai-Qin Yang,
Xiang-Ru Tao,
Liu-Xiang Yang,
Hui-Yang Gou,
Peng Zhang
Abstract:
Iron oxide is one of the most important components in Earth's mantle. Recent discovery of the stable presence of Fe5O6 at Earth's mantle environment stimulates significant interests in the understanding of this new category of iron oxides. In this paper, we report the electronic structure and magnetic properties of Fe5O6 calculated by the density functional theory plus dynamic mean field theory (D…
▽ More
Iron oxide is one of the most important components in Earth's mantle. Recent discovery of the stable presence of Fe5O6 at Earth's mantle environment stimulates significant interests in the understanding of this new category of iron oxides. In this paper, we report the electronic structure and magnetic properties of Fe5O6 calculated by the density functional theory plus dynamic mean field theory (DFT+DMFT) approach. Our calculations indicate that Fe5O6 is a conductor at the ambient pressure with dominant Fe-3d density of states at the Fermi level. The magnetic moments of iron atoms at three non-equivalent crystallographic sites in Fe5O6 collapse at significantly different rate under pressure. Such site-selective collapse of magnetic moments originates from the shifting of energy levels and the consequent charge transfer among the Fe-3d orbits when Fe5O6 is being compressed. Our simulations suggest that there could be high conductivity and volume contraction in Fe5O6 at high pressure, which may induce anomalous features in seismic velocity, energy exchange, and mass distribution at the deep interior of Earth.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
Young's Modulus and Corresponding Orientation in β-Ga2O3 Thin Films Resolved by Nanomechanical Resonators
Authors:
Xu-Qian Zheng,
Hong** Zhao,
Zhitai Jia,
Xutang Tao,
Philip X. -L. Feng
Abstract:
We report on the non-destructive measurement of Young's modulus of thin-film single crystal beta gallium oxide (beta-Ga2O3) out of its nanoscale mechanical structures by measuring their fundamental mode resonance frequencies. From the measurements, we extract Young's modulus in (100) plane, EY,(100) = 261.4+/-20.6 GPa, for beta-Ga2O3 nanoflakes synthesized by low-pressure chemical vapor deposition…
▽ More
We report on the non-destructive measurement of Young's modulus of thin-film single crystal beta gallium oxide (beta-Ga2O3) out of its nanoscale mechanical structures by measuring their fundamental mode resonance frequencies. From the measurements, we extract Young's modulus in (100) plane, EY,(100) = 261.4+/-20.6 GPa, for beta-Ga2O3 nanoflakes synthesized by low-pressure chemical vapor deposition (LPCVD), and Young's modulus in [010] direction, EY,[010] = 245.8+/-9.2 GPa, for beta-Ga2O3 nanobelts mechanically cleaved from bulk beta-Ga2O3 crystal grown by edge-defined film-fed growth (EFG) method. The Young's moduli extracted directly on nanomechanical resonant device platforms are comparable to theoretical values from first-principle calculations and experimentally extracted values from bulk crystal. This study yields important quantitative nanomechanical properties of beta-Ga2O3 crystals, and helps pave the way for further engineering of beta-Ga2O3 micro/nanoelectromechanical systems (M/NEMS) and transducers.
△ Less
Submitted 10 July, 2021;
originally announced July 2021.
-
Review on quasi-2D square planar nickelates
Authors:
Junjie Zhang,
Xutang Tao
Abstract:
In strongly correlated materials, lattice, charge, spin and orbital degrees of freedom interact with each other, leading to emergent physical properties such as superconductivity, colossal magnetic resistance and metal-insulator transition. Quasi-2D square planar nickelates, Rn+1NinO2n+2 (R=rare earth, n=2, 3...), are of significant interest and long sought for cuprate analogue due to the 3d9 elec…
▽ More
In strongly correlated materials, lattice, charge, spin and orbital degrees of freedom interact with each other, leading to emergent physical properties such as superconductivity, colossal magnetic resistance and metal-insulator transition. Quasi-2D square planar nickelates, Rn+1NinO2n+2 (R=rare earth, n=2, 3...), are of significant interest and long sought for cuprate analogue due to the 3d9 electronic configuration of Ni+, the same as the active ion Cu2+ in the high-Tc superconducting cuprates. The field has attracted intense attention since 2019 due to the discovery of superconductivity in thin films of Nd0.8Sr0.2NiO2, although no superconductivity has been reported in bulk polycrystalline powders. Herein, we review the synthesis of polycrystalline powders of quasi-2D square planar nickelates through topotactic reduction of parent compounds that are synthesized via solid state reaction, precursor method, high pressure floating zone method and high-pressure flux method. We emphasize single crystal preparation using the high-pressure floating zone techniques. We discuss their crystal structure and physical properties including resistivity, magnetic susceptibility and heat capacity. We highlight the cuprate-like physics, including charge/spin stripes and large orbital polarization, identified in single crystals of R4Ni3O8 (R=La and Pr) combining synchrotron X-ray/neutron single crystal diffraction and density functional theory calculations. Furthermore, the challenges and possible research directions of this fast-moving field in the future are briefly discussed.
△ Less
Submitted 11 March, 2021;
originally announced March 2021.
-
Experimental discovery of bulk-disclination correspondence
Authors:
Yang Liu,
Shuwai Leung,
Fei-Fei Li,
Zhi-Kang Lin,
Xiufeng Tao,
Yin Poo,
Jian-Hua Jiang
Abstract:
Most natural and artificial materials have crystalline structures from which abundant topological phases emerge [1-6]. The bulk-edge correspondence, widely-adopted in experiments to determine the band topology from edge properties, however, becomes inadequate in discerning various topological crystalline phases [7-17], leading to great challenges in the experimental classification of the large fam…
▽ More
Most natural and artificial materials have crystalline structures from which abundant topological phases emerge [1-6]. The bulk-edge correspondence, widely-adopted in experiments to determine the band topology from edge properties, however, becomes inadequate in discerning various topological crystalline phases [7-17], leading to great challenges in the experimental classification of the large family of topological crystalline materials [4-6]. Theories predict that disclinations, ubiquitous crystallographic defects, provide an effective probe of crystalline topology beyond edges [18-21], which, however, has not yet been confirmed in experiments. Here, we report the experimental discovery of the bulk-disclination correspondence which is manifested as the fractional spectral charge and robust bound states at the disclinations. The fractional disclination charge originates from the symmetry-protected bulk charge patterns---a fundamental property of many topological crystalline insulators (TCIs). Meanwhile, the robust bound states at disclinations emerge as a secondary, but directly observable property of TCIs. Using reconfigurable photonic crystals as photonic TCIs with higher-order topology, we observe those hallmark features via pump-probe and near-field detection measurements. Both the fractional charge and the localized states are demonstrated to emerge at the disclination in the TCI phase but vanish in the trivial phase. The experimental discovery of bulk-disclination correspondence unveils a novel fundamental phenomenon and a new paradigm for exploring topological materials.
△ Less
Submitted 13 September, 2020; v1 submitted 18 March, 2020;
originally announced March 2020.
-
Direct Measurement of the Electronic Structure and band gap nature of atomic-layer-thick 2H-MoTe2
Authors:
Wenjuan Zhao,
Xieyu Zhou,
Dayu Yan,
Yuan Huang,
Cong Li,
Qiang Gao,
Hongtao Rong,
Yongqing Cai,
Eike F. Schwier,
Dianxing Ju,
Cheng Shen,
Yang Wang,
Yu Xu,
Wei Ji,
Youguo Shi,
Lin Zhao,
Lihong Bao,
Qingyan Wang,
Kenya Shimada,
Xutang Tao,
Hongjun Gao,
Zuyan Xu,
Xingjiang Zhou,
Guodong Liu
Abstract:
The millimeter sized monolayer and bilayer 2H-MoTe2 single crystal samples are prepared by a new mechanical exfoliation method. Based on such high-quality samples, we report the first direct electronic structure study on them, using standard high resolution angle-resolved photoemission spectroscopy (ARPES). A direct band gap of 0.924eV is found at K in the rubidium-doped monolayer MoTe2. Similar v…
▽ More
The millimeter sized monolayer and bilayer 2H-MoTe2 single crystal samples are prepared by a new mechanical exfoliation method. Based on such high-quality samples, we report the first direct electronic structure study on them, using standard high resolution angle-resolved photoemission spectroscopy (ARPES). A direct band gap of 0.924eV is found at K in the rubidium-doped monolayer MoTe2. Similar valence band alignment is also observed in bilayer MoTe2,supporting an assumption of a analogous direct gap semiconductor on it. Our measurements indicate a rather large band splitting of 212meV at the valence band maximum (VBM) in monolayer MoTe2, and the splitting is systematically enlarged with layer stacking, from monolayer to bilayer and to bulk. Meanwhile, our PBE band calculation on these materials show excellent agreement with ARPES results. Some fundamental electronic parameters are derived from the experimental and calculated electronic structures. Our findings lay a foundation for further application-related study on monolayer and bilayer MoTe2.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Microcanonical rates from ring-polymer molecular dynamics: Direct-shooting, stationary-phase, and maximum-entropy approaches
Authors:
Xuecheng Tao,
Philip Shushkov,
Thomas F. Miller III
Abstract:
We address the calculation of microcanonical reaction rates for processes involving significant nuclear quantum effects using ring-polymer molecular dynamics (RPMD), both with and without electronically non-adiabatic transitions. After illustrating the shortcomings of the naive free-particle direct-shooting method, in which the temperature of the internal ring-polymer modes is set to the translati…
▽ More
We address the calculation of microcanonical reaction rates for processes involving significant nuclear quantum effects using ring-polymer molecular dynamics (RPMD), both with and without electronically non-adiabatic transitions. After illustrating the shortcomings of the naive free-particle direct-shooting method, in which the temperature of the internal ring-polymer modes is set to the translational energy scale, we investigate alternative strategies based on the expression for the microcanonical rate in terms of the inverse Laplace transform of the thermal reaction rate. It is shown that simple application of the stationary-phase approximation (SPA) dramatically improves the performance of the microcanonical rates using RPMD, particularly in the low-energy region where tunneling dominates. Using the SPA as a Bayesian prior, numerically exact RPMD microcanonical rates are then obtained using maximum entropy inversion of the thermal reaction rates, for both electronically adiabatic and non-adiabatic model systems. Finally, the direct-shooting method is revisited using the SPA-determined temperature for the internal ring-polymer modes, leading to a simple, direct-simulation method with improved accuracy in the tunneling regime.
△ Less
Submitted 5 January, 2020;
originally announced January 2020.
-
Path-Integral Isomorphic Hamiltonian for Including Nuclear Quantum Effects in Non-adiabatic Dynamics
Authors:
Xuecheng Tao,
Philip Shushkov,
Thomas Miller
Abstract:
We describe a path-integral approach for including nuclear quantum effects in non-adiabatic chemical dynamics simulations. For a general physical system with multiple electronic energy levels, a corresponding isomorphic Hamiltonian is introduced, such that Boltzmann sampling of the isomorphic Hamiltonian with classical nuclear degrees of freedom yields the exact quantum Boltzmann distribution for…
▽ More
We describe a path-integral approach for including nuclear quantum effects in non-adiabatic chemical dynamics simulations. For a general physical system with multiple electronic energy levels, a corresponding isomorphic Hamiltonian is introduced, such that Boltzmann sampling of the isomorphic Hamiltonian with classical nuclear degrees of freedom yields the exact quantum Boltzmann distribution for the original physical system. In the limit of a single electronic energy level, the isomorphic Hamiltonian reduces to the familiar cases of either ring polymer molecular dynamics (RPMD) or centroid molecular dynamics Hamiltonians, depending on implementation. An advantage of the isomorphic Hamiltonian is that it can easily be combined with existing mixed quantum-classical dynamics methods, such as surface hop** or Ehrenfest dynamics, to enable the simulation of electronically non-adiabatic processes with nuclear quantum effects. We present numerical applications of the isomorphic Hamiltonian to model two- and three-level systems, with encouraging results that include improvement upon a previously reported combination of RPMD with surface hop** in the deep-tunneling regime.
△ Less
Submitted 20 November, 2017; v1 submitted 20 September, 2017;
originally announced September 2017.
-
Optical properties of silicon rich silicon nitride (SixNyHz) from first principles
Authors:
Shu Xia Tao,
Anne M. M. G. Theulings,
Violeta Prodanović,
John Smedley,
Harry van der Graaf
Abstract:
The real and imaginary parts of the complex refractive index of SixNyHz have been calculated using density functional perturbation theory. Optical spectra for reflectivity, adsorption coefficient, energy-loss function (ELF), and refractive index, are obtained. The results for Si3N4 are in agreement with the available theoretical and experimental results. To understand the electron energy loss mech…
▽ More
The real and imaginary parts of the complex refractive index of SixNyHz have been calculated using density functional perturbation theory. Optical spectra for reflectivity, adsorption coefficient, energy-loss function (ELF), and refractive index, are obtained. The results for Si3N4 are in agreement with the available theoretical and experimental results. To understand the electron energy loss mechanism in Si rich silicon nitride, the influence of the Si do** rate, of the positions of the dopants, and of H in and on the surface on the ELF have been investigated. It has been found that all defects, such as dangling bonds in the bulk and surfaces, increase the intensity of the ELF in the low energy range (below 10 eV). H in the bulk and on the surface has a healing effect, which can reduce the intensity of the loss peaks by saturating the dangling bonds. Electronic structure analysis has confirmed the origin of the changes in the ELF. It has demonstrated that the changes in ELF is not only affected by the composition but also by the microstructures of the materials. The results can be used to tailor the optical properties, in this case the ELF of Si rich Si3N4, which is essential for secondary electron emission application.
△ Less
Submitted 14 October, 2015; v1 submitted 7 September, 2015;
originally announced September 2015.
-
Physical properties of thermoelectric zinc antimonide using first-principles calculations
Authors:
Philippe Jund,
Romain Viennois,
Xiaoma Tao,
Kinga Niedziolka,
Jean-Claude Tedenac
Abstract:
We report first principles calculations of the structural, electronic, elastic and vibrational properties of the semiconducting orthorhombic ZnSb compound. We study also the intrinsic point defects in order to eventually improve the thermoelectric properties of this already very promising thermoelectric material. Concerning the electronic properties, in addition to the band structure, we show that…
▽ More
We report first principles calculations of the structural, electronic, elastic and vibrational properties of the semiconducting orthorhombic ZnSb compound. We study also the intrinsic point defects in order to eventually improve the thermoelectric properties of this already very promising thermoelectric material. Concerning the electronic properties, in addition to the band structure, we show that the Zn (Sb) crystallographically equivalent atoms are not exactly equivalent from the electronic point of view. Lattice dynamics, elastic and thermodynamic properties are found to be in good agreement with experiments and they confirm the non equivalency of the zinc and antimony atoms from the vibrational point of view. The calculated elastic properties show a relatively weak anisotropy and the hardest direction is the y direction. We observe the presence of low energy modes involving both Zn and Sb atoms at about 5-6 meV, similarly to what has been found in Zn4Sb3 and we suggest that the interactions of these modes with acoustic phonons could explain the relatively low thermal conductivity of ZnSb. Zinc vacancies are the most stable defects and this explains the intrinsic p-type conductivity of ZnSb.
△ Less
Submitted 6 July, 2012;
originally announced July 2012.
-
Phase stability and physical properties of Ta5Si3 compounds from first-principles calculations,
Authors:
Xiaoma Tao,
Philippe Jund,
Catherine Colinet,
Jean-Claude Tedenac
Abstract:
We present a study of the thermodynamic and physical properties of Ta5Si3 compounds by means of density functional theory based calculations. Among the three different structures (D8m, D8l, D88), the D8l structure (Cr5B3-prototype) is the low temperature phase with a high formation enthalpy of -449.20kJ/mol, the D8m structure (W5Si3-prototype) is the high temperature phase with a formation enthalp…
▽ More
We present a study of the thermodynamic and physical properties of Ta5Si3 compounds by means of density functional theory based calculations. Among the three different structures (D8m, D8l, D88), the D8l structure (Cr5B3-prototype) is the low temperature phase with a high formation enthalpy of -449.20kJ/mol, the D8m structure (W5Si3-prototype) is the high temperature phase with a formation enthalpy of -419.36kJ/mol, and the D88 structure (Mn5Si3-prototype) is a metastable phase. The optimized lattice constants of the different Ta5Si3 compounds are also in good agreement with the experimental data. The electronic density of states (DOS) and the bonding charge density have also been calculated to elucidate the bonding mechanism in these compounds and the results indicate that bonding is mostly of covalent nature. The elastic constants of the D8m and D8l structures have been calculated together with the different moduli. Finally, by using a quasiharmonic Debye model, the Debye temperature, the heat capacity, the coefficient of thermal expansion and the Grüneisen parameter have also been obtained in the present work. The transformation temperature (2303.7K) between the D8m and the D8l structures has been predicted by means of the Gibbs energy, and this predicted temperature (2303.7K) is close to the experimental value (2433.5K).
△ Less
Submitted 3 November, 2011;
originally announced November 2011.
-
Effect of do** on the thermoelectric properties of thallium tellurides using first principles calculations
Authors:
Philippe Jund,
Xiaoma Tao,
Romain Viennois,
Jean-Claude Tédenac
Abstract:
We present a study of the electronic properties of Tl5Te3, BiTl9Te6 and SbTl9Te6 compounds by means of density functional theory based calculations. The optimized lattice constants of the compounds are in good agreement with the experimental data. The band gap of BiTl9Te6 and SbTl9Te6 compounds are found to be equal to 0.589 eV and 0.538 eV, respectively and are in agreement with the available exp…
▽ More
We present a study of the electronic properties of Tl5Te3, BiTl9Te6 and SbTl9Te6 compounds by means of density functional theory based calculations. The optimized lattice constants of the compounds are in good agreement with the experimental data. The band gap of BiTl9Te6 and SbTl9Te6 compounds are found to be equal to 0.589 eV and 0.538 eV, respectively and are in agreement with the available experimental data. To compare the thermoelectric properties of the different compounds we calculate their thermopower using Mott's law and show, as expected experimentally, that the substituted tellurides have much better thermoelectric properties compared to the pure compound.
△ Less
Submitted 2 November, 2011;
originally announced November 2011.
-
Stability and thermoelectric properties of transition metal silicides from first principles calculations
Authors:
P. Jund,
X. Tao,
R. Viennois,
C. Colinet,
J. -C. Tedenac
Abstract:
We report an ab-initio study of the stability and electronic properties of transition metal silicides in order to study their potential for high temperature thermoelectric applications. We focus on the family M5Si3 (M = Ta, W) which is stable up to about 2000 °C. We first investigate the structural stability of the two compounds and then determine the thermopower of the equilibrium structure using…
▽ More
We report an ab-initio study of the stability and electronic properties of transition metal silicides in order to study their potential for high temperature thermoelectric applications. We focus on the family M5Si3 (M = Ta, W) which is stable up to about 2000 °C. We first investigate the structural stability of the two compounds and then determine the thermopower of the equilibrium structure using the electronic density of states and Mott's law. We find that W5Si3 has a relatively large thermopower but probably not sufficient enough for thermoelectric applications.
△ Less
Submitted 2 November, 2011;
originally announced November 2011.
-
Structure and frictional properties of Langmuir-Blodgett films of Cu nanoparticles modified by dialkyldithiophosphate
Authors:
J. Xu,
Shuxi Dai,
G. Cheng,
X. H. Jiang,
X. J. Tao,
P. Y. Zhang,
Z. L. Du
Abstract:
Langmuir-Blodgett (LB) films of dialkyldithiophosphate (DDP) modified Cu nanoparticles were prepared. The structure, microfrictional behaviors and adhesion of the LB films were investigated by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and atomic/friction force microscopy (AFM/FFM). Our results showed that the modified Cu nanoparticles have a typical core-shell…
▽ More
Langmuir-Blodgett (LB) films of dialkyldithiophosphate (DDP) modified Cu nanoparticles were prepared. The structure, microfrictional behaviors and adhesion of the LB films were investigated by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and atomic/friction force microscopy (AFM/FFM). Our results showed that the modified Cu nanoparticles have a typical core-shell structure and fine film-forming ability. The images of AFM/FFM showed that LB films of modified Cu nanoparticles were composed of many nanoparticles arranged closely and orderly and the nanoparticles had favorable behaviors of lower friction. The friction loop of the films indicated that the friction force was affected prominently by the surface slope of the Cu nanoparticles and the microfrictional behaviors showed obvious "ratchet effect". The adhesion experiment showed that the modified Cu nanoparticle had a very small adhesive force. (c) 2006 Elsevier B.V. All rights reserved.
△ Less
Submitted 15 September, 2010;
originally announced September 2010.
-
Spin waves in paramagnetic BCC iron: spin dynamics simulations
Authors:
** Tao,
D. P. Landau,
T. C. Schulthess,
G. M. Stocks
Abstract:
Large scale computer simulations are used to elucidate a longstanding controversy regarding the existence, or otherwise, of spin waves in paramagnetic BCC iron. Spin dynamics simulations of the dynamic structure factor of a Heisenberg model of Fe with first principles interactions reveal that well defined peaks persist far above Curie temperature T_c. At large wave vectors these peaks can be asc…
▽ More
Large scale computer simulations are used to elucidate a longstanding controversy regarding the existence, or otherwise, of spin waves in paramagnetic BCC iron. Spin dynamics simulations of the dynamic structure factor of a Heisenberg model of Fe with first principles interactions reveal that well defined peaks persist far above Curie temperature T_c. At large wave vectors these peaks can be ascribed to propagating spin waves, at small wave vectors the peaks correspond to over-damped spin waves. Paradoxically, spin wave excitations exist despite only limited magnetic short-range order at and above T_c.
△ Less
Submitted 28 January, 2005;
originally announced January 2005.