Showing 1–50 of 112 results for author: Sun, W

Unveiling mussel plaque core ductility: the role of pore distribution and hierarchical structure

Authors: Yulan Lyu, Mengting Tan, Yong Pang, Wei Sun, Shuguang Li, Tao Liu

Abstract: The mussel thread-plaque system exhibits strong adhesion and high ductility, allowing it to adhere to various surfaces. While the microstructure of plaques has been thoroughly studied, the effect of their unique porous structure on ductility remains unclear. This study firstly investigated the porous structure of mussel plaque cores using scanning electron microscopy (SEM). Two-dimensional (2D) po… ▽ More The mussel thread-plaque system exhibits strong adhesion and high ductility, allowing it to adhere to various surfaces. While the microstructure of plaques has been thoroughly studied, the effect of their unique porous structure on ductility remains unclear. This study firstly investigated the porous structure of mussel plaque cores using scanning electron microscopy (SEM). Two-dimensional (2D) porous representative volume elements (RVEs) with scaled distribution parameters were generated, and the calibrated phase-field modelling method was applied to analyse the effect of the pore distribution and multi-scale porous structure on the failure mechanism of porous RVEs. The SEM analysis revealed that large-scale pores exhibited a lognormal size distribution and a uniform spatial distribution. Simulations showed that increasing the normalised mean radius value of the large-scale pore distribution can statistically lead to a decreasing trend in ductility, strength and strain energy, but cannot solely determine their values. The interaction between pores can lead to two different failure modes under the same pore distribution: progressive failure mode and sudden failure mode. Additionally, the hierarchical structure of multi-scale porous RVEs can further increase ductility by 40%-60% compared to single-scale porous RVEs by reducing stiffness, highlighting the hierarchical structure could be another key factor contributing to the high ductility. These findings deepen our understanding of how the pore distribution and multi-scale porous structure in mussel plaques contribute to their high ductility and affect other mechanical properties, providing valuable insights for the future design of highly ductile biomimetic materials. △ Less

Submitted 8 July, 2024; originally announced July 2024.

A hybrid FEM-NN optimization method to learn the physics-constrained constitutive relations from full-field data

Authors: Xinxin Wu Kaiqiang Sun, Shaohua Yang, Huan Wang, Ye Xu, Yin Zhang, Sheng Mao

Abstract: Neural networks (NNs) have demonstrated strong capabilities of representing high-dimensional, complex functional relations, and hence have been widely used to characterize complex constitutive relations for various types of materials, such as polycrystals, polymers, etc. However, to construct a reliable NN-based constitutive model, a considerable amount of data, i.e. stress-strain states along dif… ▽ More Neural networks (NNs) have demonstrated strong capabilities of representing high-dimensional, complex functional relations, and hence have been widely used to characterize complex constitutive relations for various types of materials, such as polycrystals, polymers, etc. However, to construct a reliable NN-based constitutive model, a considerable amount of data, i.e. stress-strain states along different loading paths is needed, which can be expensive to collect. To address such challenge, we develop a hybrid finite element method (FEM) - NN optimization framework to learn complex hyperelastic constitutive relations from full-field data. The key advantage of this framework is that it can make use of the non-uniform displacement field due to the geometric inhomogeneities for training NN-based constitutive models. Since such data can provide many different stress-strain states in a single test, it can greatly reduce the number of experiments needed for the training of NNs. Besides, we adopt a mechanics-informed neural network (MINN) as our architecture to ensure that our NN-based models satisfy all necessary physical constraints by construction, such as objectivity, material symmetry, polyconvexity, etc. Such architecture is also key to the convergence of our optimization framework. We then use both synthetic and experimental data to test the performance of our proposed framework on various isotropic hyperelastic materials. Results show that our optimization framework can be used to train NN-based constitutive models for hyperelastic materials with high accuracy and efficiency using data generated from simple tests, which can also be easily adapted to characterize complex constitutive models for a broader range of materials. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: 14 pages,7 figures

Ferroelectricity in oxygen-terminated 2D carbides of lanthanide elements

Authors: Lin Han, Wencong Sun, **wei Liu, Xianqing Lin, Dan Liu, David Tomanek

Abstract: We investigate the properties of oxygen-functionalized carbides of lanthanide elements with the composition M2CO2 (M=Gd, Tb,Dy) that form two-dimensional (2D) structures. Our ab initio calculations reveal that oxygen termination turns M2C monolayers into semiconductors with two dynamically stable phases. Of these, the energetically favored alpha-phase becomes ferroelectric, whereas the beta-phase… ▽ More We investigate the properties of oxygen-functionalized carbides of lanthanide elements with the composition M2CO2 (M=Gd, Tb,Dy) that form two-dimensional (2D) structures. Our ab initio calculations reveal that oxygen termination turns M2C monolayers into semiconductors with two dynamically stable phases. Of these, the energetically favored alpha-phase becomes ferroelectric, whereas the beta-phase turns anti-ferroelectric. Applying in-plane biaxial strain may transform one phase into the other, changes the ferroelectric polarization of the alpha-phase in a linear fashion, and modifies the size and nature of the fundamental band gap from direct to indirect. The structure with a direct band gap exhibits in-plane isotropic electronic and optical properties. This previously unexplored class of systems also exhibits excellent photon absorption in the ultraviolet range. △ Less

Submitted 1 June, 2024; originally announced June 2024.

Journal ref: Phys. Rev. Materials 8, 054005 (2024)

Pair density waves in the strong-coupling two-dimensional Holstein-Hubbard model: a variational Monte Carlo study

Authors: Jiucai Wang, Wen Sun, Hao-Xin Wang, Zhaoyu Han, Steven A. Kivelson, Hong Yao

Abstract: A robust theory of the mechanism of pair density wave (PDW) superconductivity (i.e. where Cooper pairs have nonzero center of mass momentum) remains elusive. Here we explore the triangular lattice $t$-$J$-$V$ model, a low-energy effective theory derived from the strong-coupling limit of the Holstein-Hubbard model, by large-scale variational Monte Carlo simulations. When the electron density is suf… ▽ More A robust theory of the mechanism of pair density wave (PDW) superconductivity (i.e. where Cooper pairs have nonzero center of mass momentum) remains elusive. Here we explore the triangular lattice $t$-$J$-$V$ model, a low-energy effective theory derived from the strong-coupling limit of the Holstein-Hubbard model, by large-scale variational Monte Carlo simulations. When the electron density is sufficiently low, the favored ground state is an s-wave PDW, consistent with results obtained from previous studies in this limit. Additionally, a PDW ground state with nematic d-wave pairing emerges in intermediate range of electron densities and phonon frequencies. For these s-wave and d-wave PDWs arising in states with spontaneous breaking of time-reversal and inversion symmetries, PDW formation derives from valley-polarization and intra-pocket pairing. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: 4.5 pages, 4 figures, 2 tables

Why does silicon have an indirect band gap?

Authors: Emily Oliphant, Veda Mantena, Madison Brod, G. Jeffrey Snyder, Wenhao Sun

Abstract: Density functional theory (DFT) is a powerful tool for predicting the electronic band structures of functional materials. However, it is often difficult to intuit how major band structure features$-$such as band gap magnitude, location of band extrema, effective masses, etc.$-$arise from the underlying crystal chemistry of a material. Band structure is represented in reciprocal space, but arises f… ▽ More Density functional theory (DFT) is a powerful tool for predicting the electronic band structures of functional materials. However, it is often difficult to intuit how major band structure features$-$such as band gap magnitude, location of band extrema, effective masses, etc.$-$arise from the underlying crystal chemistry of a material. Band structure is represented in reciprocal space, but arises from the orbital and bonding interactions between atoms in real space. Here, we present a conceptual and computable framework to extract chemical bonding origins of DFT-calculated band structure features. As a key example, we explain here the indirect band gap of silicon, which profoundly impacts its properties for use in photovoltaics and electronics. Even in this basic semiconductor material, our approach leads to new insights to understand and engineer its conduction band minimum position. These calculation techniques can be broadly applied to reveal the crystal chemistry origins of electronic structure features in other optical, electronic, and magnetic materials. △ Less

Submitted 9 April, 2024; v1 submitted 8 April, 2024; originally announced April 2024.

The geometry of high-dimensional phase diagrams: III. Engineering relative stability in four dimensions

Authors: Jiadong Chen, Matthew J. Powell-Palm, Wenhao Sun

Abstract: Designing thermodynamic conditions to improve (or reduce) the stability of a target material is a key task in materials engineering. For example, during materials synthesis one aims to enhance the stability of a target phase relative to its precursors or competing byproduct phases. If an undesired phase forms in experiment, one aims to destabilize the undesired phase by dissolution or corrosion. W… ▽ More Designing thermodynamic conditions to improve (or reduce) the stability of a target material is a key task in materials engineering. For example, during materials synthesis one aims to enhance the stability of a target phase relative to its precursors or competing byproduct phases. If an undesired phase forms in experiment, one aims to destabilize the undesired phase by dissolution or corrosion. When multiple thermodynamic knobs are available to engineer relative stability, it can be difficult to navigate the corresponding high-dimensional phase diagram to identify optimal pathways to promote or destabilize a target phase. We propose that instead of map** the absolute phase boundaries of a target material, we can invoke a generalized Clausius-Clapeyron relation, which provides a 'compass' to point out which directions on a high-dimensional phase diagram are best to stabilize or destabilize a target phase. Phase boundaries on high-dimensional phase diagrams are also high-dimensional objects, and can represent phase coexistence between numerous phases simultaneously. On a 2D temperature-pressure phase diagram, phase boundaries are 1D lines separating two phases, with a slope given by the Clausius-Clapeyron relation, dP/dT = ΔS/ΔV. Here, we derive a parametric form of the Clausius-Clapeyron relation that readily scales to high-dimensional phase boundaries. The gradient of a phase boundary guides us on how to increase or decrease the relative stability of a target compound, meaning this generalized Clausius-Clapeyron relation enables us to engineer relative stability with respect to multiple thermodynamic conditions simultaneously. Using this approach, we analyze the acid stability of manganese oxide catalysts on a 4-dimensional Pourbaix diagram with axes of pH, redox potential, nanoparticle size, and aqueous [K+] ion concentration. △ Less

Submitted 9 April, 2024; v1 submitted 8 April, 2024; originally announced April 2024.

Quasicrystal bulk and surface energies from density functional theory

Authors: Woohyeon Baek, Sambit Das, Shibo Tan, Vikram Gavini, Wenhao Sun

Abstract: Are quasicrystals stable or metastable? Density functional theory (DFT) is often used to evaluate thermodynamic stability, but quasicrystals are long-range aperiodic and their energies cannot be calculated using conventional ab initio methods. Here, we perform first-principles calculations on quasicrystal nanoparticles of increasing sizes, from which we can directly extrapolate their bulk and surf… ▽ More Are quasicrystals stable or metastable? Density functional theory (DFT) is often used to evaluate thermodynamic stability, but quasicrystals are long-range aperiodic and their energies cannot be calculated using conventional ab initio methods. Here, we perform first-principles calculations on quasicrystal nanoparticles of increasing sizes, from which we can directly extrapolate their bulk and surface energies. Using this technique, we determine with high confidence that the icosahedral quasicrystals ScZn7.33 and YbCd5.7 are ground-state phases--revealing that translational symmetry is not a necessary condition for the T = 0 K stability of inorganic solids. Although we find the ScZn7.33 quasicrystal to be thermodynamically stable, we show on a mixed thermodynamic and kinetic phase diagram that its solidification from the melt is nucleation-limited, which illustrates why even stable materials may be kinetically challenging to grow. Our techniques here broadly open the door to first-principles investigations into the structure-bonding-stability relationships of aperiodic materials. △ Less

Submitted 8 April, 2024; originally announced April 2024.

The geometry of high-dimensional phase diagrams: II. The duality between closed and open chemical systems

Authors: Jiadong Chen, Matthew J. Powell-Palm, Wenhao Sun

Abstract: Modern materials are often synthesized or operated in complex chemical environments, where there can be numerous elemental species, competing phases, and reaction pathways. When analyzing reactions using the Gibbs free energy, which has a natural variable of composition, it is often cumbersome to solve for the equilibrium states of a complicated heterogeneous mixture of phases. However, if one is… ▽ More Modern materials are often synthesized or operated in complex chemical environments, where there can be numerous elemental species, competing phases, and reaction pathways. When analyzing reactions using the Gibbs free energy, which has a natural variable of composition, it is often cumbersome to solve for the equilibrium states of a complicated heterogeneous mixture of phases. However, if one is interested only in the stability of a single target material, it may be easier to reframe the boundary conditions around only the target material-of-interest, with boundary conditions open to chemical exchange with an external reservoir. The corresponding phase diagram would thus have a chemical potential axis for the open volatile species, rather than a composition axis. Here we discuss how to derive, compute, and interpret phase diagrams with chemical potential axes, which are dual to the more common composition phase diagram. In our ambition to construct high-dimensional phase diagrams featuring any thermodynamic variable on its axes, here we examine the duality between extensive and intensive conjugate variables in equilibrium thermodynamics. This duality manifests from the distinction between closed and open boundary conditions of a thermodynamic system, to the relationship between the Internal Energy and its Legendre transformations, to the point-line duality in calculating convex hulls versus half-space intersections. Here we focus on the duality relationships of chemical work, with extensive composition variables, N, and intensive chemical potentials, μ. In particular, we explore mixed composition-chemical potential diagrams for oxynitride synthesis, lithium-ion cathode stability, and oxidation of high-entropy alloys. We further illustrate how chemical potential diagrams reveal the driving forces for non-equilibrium growth and dissolution kinetics. △ Less

Submitted 9 April, 2024; v1 submitted 8 April, 2024; originally announced April 2024.

Electronic Structure of Superconducting Infinite-Layer Lanthanum Nickelates

Authors: Wenjie Sun, Zhicheng Jiang, Chengliang Xia, Bo Hao, Yueying Li, Shengjun Yan, Maosen Wang, Hongquan Liu, Jianyang Ding, Jiayu Liu, Zhengtai Liu, Jishan Liu, Hanghui Chen, Dawei Shen, Yuefeng Nie

Abstract: Revealing the momentum-resolved electronic structure of infinite-layer nickelates is essential for understanding this new class of unconventional superconductors, but has been hindered by the formidable challenges in improving the sample quality. In this work, we report for the first time the angle-resolved photoemission spectroscopy of superconducting La$_{0.8}$Sr$_{0.2}$NiO$_{2}$ films prepared… ▽ More Revealing the momentum-resolved electronic structure of infinite-layer nickelates is essential for understanding this new class of unconventional superconductors, but has been hindered by the formidable challenges in improving the sample quality. In this work, we report for the first time the angle-resolved photoemission spectroscopy of superconducting La$_{0.8}$Sr$_{0.2}$NiO$_{2}$ films prepared by molecular beam epitaxy and ${\mathrm{\textit{in situ}}}$ atomic-hydrogen reduction. The measured Fermi topology closely matches theoretical calculations, showing a large Ni-$d_{x^2-y^2}$ derived Fermi sheet that evolves from hole-like to electron-like along $k_{z}$, and a three-dimensional (3D) electron pocket centered at Brillouin zone corner. The Ni-$d_{x^2-y^2}$ derived bands show a mass enhancement ($m^*/m_{\rm{DFT}}$) of 2-3,while the 3D electron band shows negligible band renormalization. Moreover, the Ni-$d_{x^2-y^2}$ derived states also display a band dispersion anomaly at higher binding energy, reminiscent of the waterfall feature and kinks observed in cuprates. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: 29 pages,13 figures

Nano-Electromagnetic Super-dephasing in Collective Atom-Atom Interactions

Authors: Wenbo Sun, Adrian E. Rubio López, Zubin Jacob

Abstract: Pure dephasing and spontaneous emission are two non-unitary processes of atoms or spins interacting with fluctuating electromagnetic (EM) modes. Collective spontaneous emission (e.g., superradiance) originates from interactions with EM modes in resonance with atoms and has received considerable attention. Meanwhile, the analogous collective dephasing phenomena remain poorly understood. Here, we in… ▽ More Pure dephasing and spontaneous emission are two non-unitary processes of atoms or spins interacting with fluctuating electromagnetic (EM) modes. Collective spontaneous emission (e.g., superradiance) originates from interactions with EM modes in resonance with atoms and has received considerable attention. Meanwhile, the analogous collective dephasing phenomena remain poorly understood. Here, we introduce the nano-EM super-dephasing phenomenon arising in the photonic environment near lossy material interfaces. We show that this effect is enhanced by over 10 orders of magnitude compared to free space or photonic cavities due to the presence of long-range correlations in low-frequency evanescent EM fluctuations. We unravel the universality of nano-EM super-dephasing behaviors near ferrimagnets, metals, and superconductors and their dependence on low-frequency material properties. We demonstrate that the scaling of nano-EM super-dephasing is independent of EM modes' wavelengths and differs from the conventional $N^2$ scaling of superradiance by analyzing the decoherence of entangled states, including GHZ states. Finally, we show how to experimentally isolate and control super-dephasing to open interesting frontiers for scalable quantum systems. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: 6+17 pages, 3+3 figures

Superconductivity in freestanding infinite-layer nickelate membranes

Authors: Shengjun Yan, Wei Mao, Wenjie Sun, Yueying Li, Haoying Sun, Jiangfeng Yang, Bo Hao, Wei Guo, Leyan Nian, Zhengbin Gu, Peng Wang, Yuefeng Nie

Abstract: The observation of superconductivity in infinite-layer nickelates has attracted significant attention due to its potential as a new platform for exploring high $ \mathrm{\textit{T}}_{c} $ superconductivity. However, thus far, superconductivity has only been observed in epitaxial thin films, which limits the manipulation capabilities and modulation methods compared to two-dimensional exfoliated mat… ▽ More The observation of superconductivity in infinite-layer nickelates has attracted significant attention due to its potential as a new platform for exploring high $ \mathrm{\textit{T}}_{c} $ superconductivity. However, thus far, superconductivity has only been observed in epitaxial thin films, which limits the manipulation capabilities and modulation methods compared to two-dimensional exfoliated materials. Given the exceptionally giant strain tunability and stacking capability of freestanding membranes, separating superconducting nickelates from the as-grown substrate is a novel way to engineer the superconductivity and uncover the underlying physics. Herein, we report the synthesis of the superconducting freestanding $ \mathrm{La}_{0.8}\mathrm{Sr}_{0.2}\mathrm{Ni}\mathrm{O}_{2} $ membranes ($ \mathrm{\textit{T}}_{c}\mathrm{=}\mathrm{10.9}\;\mathrm{K} $), emphasizing the crucial roles of the interface engineering in the precursor phase film growth and the quick transfer process in achieving superconductivity. Our work offers a new versatile platform for investigating the superconductivity in nickelates, such as the pairing symmetry via constructing Josephson tunneling junctions and higher $ \mathrm{\textit{T}}_{c} $ values via high-pressure experiments. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 20 pages, 9 figures

${\mathrm{\textit{In situ}}}$ preparation of superconducting infinite-layer nickelate thin films with atomically flat surface

Authors: Wenjie Sun, Zhichao Wang, Bo Hao, Shengjun Yan, Haoying Sun, Zhengbin Gu, Yu Deng, Yuefeng Nie

Abstract: Since their discovery, the infinite-layer nickelates have been regarded as an appealing system for gaining deeper insights into high temperature superconductivity (HTSC). However, the synthesis of superconducting samples has been proved to be challenging. Here, we develop an ultrahigh vacuum (UHV) ${\mathrm{\textit{in situ}}}$ reduction method using atomic hydrogen as reducing agent and apply it i… ▽ More Since their discovery, the infinite-layer nickelates have been regarded as an appealing system for gaining deeper insights into high temperature superconductivity (HTSC). However, the synthesis of superconducting samples has been proved to be challenging. Here, we develop an ultrahigh vacuum (UHV) ${\mathrm{\textit{in situ}}}$ reduction method using atomic hydrogen as reducing agent and apply it in lanthanum nickelate system. The reduction parameters, including the reduction temperature (${\mathrm{\textit{T}_{R}}}$) and hydrogen pressure (${\mathrm{\textit{P}_{H}}}$), are systematically explored. We found that the reduction window for achieving superconducting transition is quite wide, reaching nearly 80$^\circ$C in ${\mathrm{\textit{T}_{R}}}$ and 3 orders of magnitude in ${\mathrm{\textit{P}_{H}}}$ when the reduction time is set to 30 mins. And there exists an optimal ${\mathrm{\textit{P}_{H}}}$ for achieving the highest ${\mathrm{\textit{T}_{c}}}$ if both ${\mathrm{\textit{T}_{R}}}$ and reduction time are fixed. More prominently, as confirmed by atomic force microscopy and scanning transmission electron microscopy, the atomically flat surface can be preserved during the ${\mathrm{\textit{in situ}}}$ reduction process, providing advantages over the ${\mathrm{\textit{ex situ}}}$ CaH$_2$ method for surface-sensitive experiments. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 5 pages, 4 figures

Journal ref: Adv. Mater. 2024, 2401342

Giant Enhancement of Vacuum Friction in Spinning YIG Nanospheres

Authors: Farhad Khosravi, Wenbo Sun, Chinmay Khandekar, Tongcang Li, Zubin Jacob

Abstract: Experimental observations of vacuum radiation and vacuum frictional torque are challenging due to their vanishingly small effects in practical systems. For example, a rotating nanosphere in free space slows down due to friction from vacuum fluctuations with a stop** time around the age of the universe. Here, we show that a spinning yttrium iron garnet (YIG) nanosphere near aluminum or YIG slabs… ▽ More Experimental observations of vacuum radiation and vacuum frictional torque are challenging due to their vanishingly small effects in practical systems. For example, a rotating nanosphere in free space slows down due to friction from vacuum fluctuations with a stop** time around the age of the universe. Here, we show that a spinning yttrium iron garnet (YIG) nanosphere near aluminum or YIG slabs exhibits vacuum radiation eight orders of magnitude larger than other metallic or dielectric spinning nanospheres. We achieve this giant enhancement by exploiting the large near-field magnetic local density of states in YIG systems, which occurs in the low-frequency GHz regime comparable to the rotation frequency. Furthermore, we propose a realistic experimental setup for observing the effects of this large vacuum radiation and frictional torque under experimentally accessible conditions. △ Less

Submitted 17 January, 2024; originally announced January 2024.

Comments: main text (5 pages, 3 figures) + appendices (11 pages, 1 figure) + supplementary material (11 pages, 3 figures)

Journal ref: New J. Phys. 26 053006 (2024)

Uncovering high-dimensional phase space and the application of Mixture of Experts (MoE) on building the Large CALPHAD Model (LCM)

Authors: Zhengdi Liu, Wenwen Sun

Abstract: This study presents a novel approach for analyzing and establishing Large CALPHAD model (LCM) in complex alloy systems. Through the introduction of "composition space volume", a multi-dimensional metric which allows to quatitatively define alloy composition variations. Utilizing stochastic methods, the study quantifies phase space complexity through phase density, and model training costs through… ▽ More This study presents a novel approach for analyzing and establishing Large CALPHAD model (LCM) in complex alloy systems. Through the introduction of "composition space volume", a multi-dimensional metric which allows to quatitatively define alloy composition variations. Utilizing stochastic methods, the study quantifies phase space complexity through phase density, and model training costs through data density. This leads to a strategic segmentation of the entire composition space, tailored to the complexity of each segment, thereby reducing computational efforts in model training. A significant advancement is the integration of segmented models using a Mixture of Experts (MoE) approach, ensuring accurate portrayal of phase behaviors across diverse composition spaces. This technique is demonstrated in establishing a high-dimensional phase diagram for the FeCoNiTi system, highlighting its efficiency and accuracy. The study's methodologies offer a systematic and cost-effective framework for modeling complex alloy systems, marking a step forward in the field of alloy design and analysis. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Spectroscopy-Guided Discovery of Three-Dimensional Structures of Disordered Materials with Diffusion Models

Authors: Hyuna Kwon, Tim Hsu, Wenyu Sun, Wonseok Jeong, Fikret Aydin, James Chapman, Xiao Chen, Matthew R. Carbone, Deyu Lu, Fei Zhou, Tuan Anh Pham

Abstract: The ability to rapidly develop materials with desired properties has a transformative impact on a broad range of emerging technologies. In this work, we introduce a new framework based on the diffusion model, a recent generative machine learning method to predict 3D structures of disordered materials from a target property. For demonstration, we apply the model to identify the atomic structures of… ▽ More The ability to rapidly develop materials with desired properties has a transformative impact on a broad range of emerging technologies. In this work, we introduce a new framework based on the diffusion model, a recent generative machine learning method to predict 3D structures of disordered materials from a target property. For demonstration, we apply the model to identify the atomic structures of amorphous carbons ($a$-C) as a representative material system from the target X-ray absorption near edge structure (XANES) spectra--a common experimental technique to probe atomic structures of materials. We show that conditional generation guided by XANES spectra reproduces key features of the target structures. Furthermore, we show that our model can steer the generative process to tailor atomic arrangements for a specific XANES spectrum. Finally, our generative model exhibits a remarkable scale-agnostic property, thereby enabling generation of realistic, large-scale structures through learning from a small-scale dataset (i.e., with small unit cells). Our work represents a significant stride in bridging the gap between materials characterization and atomic structure determination; in addition, it can be leveraged for materials discovery in exploring various material properties as targeted. △ Less

Submitted 9 December, 2023; originally announced December 2023.

The High-dimensional Phase Diagram and the Large CALPHAD Model

Authors: Zhengdi Liu, Xulong An, Wenwen Sun

Abstract: When alloy systems comprise more than three elements, the visualization of the entire phase space becomes not only daunting but is also accompanied by a data surge. Addressing this complexity, we delve into the FeNiCrMn alloy system and introduce the Large CALPHAD Model (LCM). The LCM acts as a computational conduit, capturing the entire phase space. Subsequently, this enormous data is systematica… ▽ More When alloy systems comprise more than three elements, the visualization of the entire phase space becomes not only daunting but is also accompanied by a data surge. Addressing this complexity, we delve into the FeNiCrMn alloy system and introduce the Large CALPHAD Model (LCM). The LCM acts as a computational conduit, capturing the entire phase space. Subsequently, this enormous data is systematically structured using a high-dimensional phase diagram, aided by hash tables and Depth-first Search (DFS), rendering it both digestible and programmatically accessible. Remarkably, the LCM boasts a 97% classification accuracy and a mean square error of 4.80*10-5 in phase volume prediction. Our methodology successfully delineates 51 unique phase spaces in the FeNiCrMn system, exemplifying its efficacy with the design of all 439 eutectic alloys. This pioneering methodology signifies a monumental shift in alloy design techniques or even multi-variable problems. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Prediction of Yield Surface of Single Crystal Copper from Discrete Dislocation Dynamics and Geometric Learning

Authors: Wu-Rong Jian, Mian Xiao, WaiChing Sun, Wei Cai

Abstract: A yield surface of a material is a set of critical stress conditions beyond which macroscopic plastic deformation begins. For crystalline solids, plastic deformation occurs through the motion of dislocations, which can be captured by discrete dislocation dynamics (DDD) simulations. In this paper, we predict the yield surfaces and strain-hardening behaviors using DDD simulations and a geometric man… ▽ More A yield surface of a material is a set of critical stress conditions beyond which macroscopic plastic deformation begins. For crystalline solids, plastic deformation occurs through the motion of dislocations, which can be captured by discrete dislocation dynamics (DDD) simulations. In this paper, we predict the yield surfaces and strain-hardening behaviors using DDD simulations and a geometric manifold learning approach. The yield surfaces in the three-dimensional space of plane stress are constructed for single-crystal copper subjected to uniaxial loading along the $[100]$ and $[110]$ directions, respectively. With increasing plastic deformation under $[100]$ loading, the yield surface expands nearly uniformly in all directions, corresponding to isotropic hardening. In contrast, under $[110]$ loading, latent hardening is observed, where the yield surface remains nearly unchanged in the orientations in the vicinity of the loading direction itself, but expands in other directions, resulting in an asymmetric shape. This difference in hardening behaviors is attributed to the different dislocation multiplication behaviors on various slip systems under the two loading conditions. △ Less

Submitted 2 February, 2024; v1 submitted 27 October, 2023; originally announced October 2023.

Physics-constrained symbolic model discovery for polyconvex incompressible hyperelastic materials

Authors: Bahador Bahmani, WaiChing Sun

Abstract: We present a machine learning framework capable of consistently inferring mathematical expressions of hyperelastic energy functionals for incompressible materials from sparse experimental data and physical laws. To achieve this goal, we propose a polyconvex neural additive model (PNAM) that enables us to express the hyperelastic model in a learnable feature space while enforcing polyconvexity. An… ▽ More We present a machine learning framework capable of consistently inferring mathematical expressions of hyperelastic energy functionals for incompressible materials from sparse experimental data and physical laws. To achieve this goal, we propose a polyconvex neural additive model (PNAM) that enables us to express the hyperelastic model in a learnable feature space while enforcing polyconvexity. An upshot of this feature space obtained via the PNAM is that (1) it is spanned by a set of univariate basis that can be re-parametrized with a more complex mathematical form, and (2) the resultant elasticity model is guaranteed to fulfill the polyconvexity, which ensures that the acoustic tensor remains elliptic for any deformation. To further improve the interpretability, we use genetic programming to convert each univariate basis into a compact mathematical expression. The resultant multi-variable mathematical models obtained from this proposed framework are not only more interpretable but are also proven to fulfill physical laws. By controlling the compactness of the learned symbolic form, the machine learning-generated mathematical model also requires fewer arithmetic operations than its deep neural network counterparts during deployment. This latter attribute is crucial for scaling large-scale simulations where the constitutive responses of every integration point must be updated within each incremental time step. We compare our proposed model discovery framework against other state-of-the-art alternatives to assess the robustness and efficiency of the training algorithms and examine the trade-off between interpretability, accuracy, and precision of the learned symbolic hyperelastic models obtained from different approaches. Our numerical results suggest that our approach extrapolates well outside the training data regime due to the precise incorporation of physics-based knowledge. △ Less

Submitted 10 February, 2024; v1 submitted 6 October, 2023; originally announced October 2023.

A Geometric Map** from Rectilinear Material Orthotropy to Isotropy: Insights to Plates and Shells

Authors: Wenqian Sun, Cody Rasmussen, Roman Vetter, Jayson Paulose

Abstract: Orthotropic shell structures are ubiquitous in biology and engineering, from bacterial cell walls to reinforced domes. We present a rescaling transformation that maps an orthotropic shallow shell to an isotropic one with a different local geometry. The map** is applicable to any shell section for which the material orthotropy directions match the principal curvature directions, assuming a common… ▽ More Orthotropic shell structures are ubiquitous in biology and engineering, from bacterial cell walls to reinforced domes. We present a rescaling transformation that maps an orthotropic shallow shell to an isotropic one with a different local geometry. The map** is applicable to any shell section for which the material orthotropy directions match the principal curvature directions, assuming a commonly used form for the orthotropic shear modulus. Using the rescaling transformation, we derive exact expressions for the buckling pressure as well as the linear indentation response of orthotropic cylinders and general ellipsoids of revolution, which we verify against numerical simulations. Our analysis disentangles the separate contributions of geometric and material anisotropy to shell rigidity. In particular, we identify the geometric mean of orthotropic elastic constants as the key quantifier of material stiffness, playing a role akin to the Gaussian curvature which captures the geometric stiffness contribution. Besides providing insights into the mechanical response of orthotropic shells, our work rigorously establishes the validity of isotropic approximations to orthotropic shells and also identifies situations in which these approximations might fail. △ Less

Submitted 28 July, 2023; originally announced July 2023.

Comments: 34 pages, 8 figures

Journal ref: Physical Review E 108, 065003 (2023)

Optical N-plasmon: Topological hydrodynamic excitations in Graphene from repulsive Hall viscosity

Authors: Wenbo Sun, Todd Van Mechelen, Sathwik Bharadwaj, Ashwin K. Boddeti, Zubin Jacob

Abstract: Edge states occurring in Chern and quantum spin-Hall phases are signatures of the topological electronic band structure in two-dimensional (2D) materials. Recently, a new topological electromagnetic phase of graphene characterized by the optical N-invariant has been proposed. Optical N-invariant arises from repulsive Hall viscosity in hydrodynamic many-body electron systems, fundamentally differen… ▽ More Edge states occurring in Chern and quantum spin-Hall phases are signatures of the topological electronic band structure in two-dimensional (2D) materials. Recently, a new topological electromagnetic phase of graphene characterized by the optical N-invariant has been proposed. Optical N-invariant arises from repulsive Hall viscosity in hydrodynamic many-body electron systems, fundamentally different from the Chern and Z2 invariants. In this paper, we introduce the topologically protected edge excitation -- optical N-plasmon of interacting many-body electron systems in the topological optical N-phase. These optical N-plasmons are signatures of the topological plasmonic band structure in 2D materials. We demonstrate that optical N-plasmons exhibit fundamentally different dispersion relations, stability, and edge profiles from the topologically trivial edge magneto plasmons. Based on the optical N-plasmon, we design an ultra sub-wavelength broadband topological hydrodynamic circulator, which is a chiral quantum radio-frequency circuit component crucial for information routing and interfacing quantum-classical computing systems. Furthermore, we reveal that optical N-plasmons can be effectively tuned by the neighboring dielectric environment without breaking the topological properties. Our work provides a smoking gun signature of repulsive Hall viscosity and opens practical applications of topological electromagnetic phases of two-dimensional materials. △ Less

Submitted 1 July, 2023; originally announced July 2023.

Comments: 13 pages, 6 figures

Journal ref: New J. Phys. 25 113009 (2023)

Gd-Based Solvated Shells for Defect Passivation of CsPbBr$_3$ Nanoplatelets Enabling Efficient Color-Saturated Blue Electroluminescence

Authors: Haoran Wang, **gyu Qian, Jiayun Sun, Tong Su, Shiming Lei, Xiaoyu Zhang, Wallace C. H. Choy, Xiao Wei Sun, Kai Wang, Weiwei Zhao

Abstract: Reduced-dimensional CsPbBr$_3$ nanoplatelets (NPLs) are promising candidates for color-saturated blue emitters, yet their electroluminescence performance is hampered by non-radiative recombination, which is associated with bromine vacancies. Here, we show that a post-synthetic treatment of CsPbBr$_3$ NPLs with GdBr$_3$-dimethylformamide (DMF) can effectively eliminate defects while preserving the… ▽ More Reduced-dimensional CsPbBr$_3$ nanoplatelets (NPLs) are promising candidates for color-saturated blue emitters, yet their electroluminescence performance is hampered by non-radiative recombination, which is associated with bromine vacancies. Here, we show that a post-synthetic treatment of CsPbBr$_3$ NPLs with GdBr$_3$-dimethylformamide (DMF) can effectively eliminate defects while preserving the color. According to a combined experimental and theoretical study, Gd$^{3+}$ ions are less reactive with NPLs as a result of compact interaction between them and DMF, and this stable Gd$^{3+}$-DMF solvation structure makes Brions more available and allows them to move more freely. Consequently, defects are rapidly passivated and photoluminescence quantum yield increases dramatically (from 35 to ~100%), while the surface ligand density and emission color remain unchanged. The result is a remarkable electroluminescence efficiency of 2.4% (at 464 nm), one of the highest in pure blue perovskite NPL light-emitting diodes. It is noteworthy that the conductive NPL film shows a high photoluminescence quantum yield of 80%, demonstrating NPLs' significant electroluminescence potential with further device structure design. △ Less

Submitted 23 June, 2023; originally announced June 2023.

Large upper critical fields and dimensionality crossover of superconductivity in infinite-layer nickelate La$_{0.8}$Sr$_{0.2}$NiO$_{2}$

Authors: Wei Wei, Wenjie Sun, Yue Sun, Gangjian **, Feng Yang, Yueying Li, Zengwei Zhu, Yuefeng Nie, Zhixiang Shi

Abstract: The recently emerging superconductivity in infinite-layer nickelates, with isostructure and isoelectron of cuprates, provides a new platform to explore the pairing mechanism of high-temperature superconductors. In this work, we studied the upper critical field ($H_{\rm{c2}}$) of a high-quality La$_{0.8}$Sr$_{0.2}$NiO$_{2}$ thin film with superconducting transition temperature, $T_{\rm{c}}$ = 18.8… ▽ More The recently emerging superconductivity in infinite-layer nickelates, with isostructure and isoelectron of cuprates, provides a new platform to explore the pairing mechanism of high-temperature superconductors. In this work, we studied the upper critical field ($H_{\rm{c2}}$) of a high-quality La$_{0.8}$Sr$_{0.2}$NiO$_{2}$ thin film with superconducting transition temperature, $T_{\rm{c}}$ = 18.8 K, using high magnetic field up to 56 T. A very large $H_{\rm{c2}}$, $\sim$ 40 T for $H$ $\Arrowvert$ $c$ and $\sim$ 52 T for $H$ $\Arrowvert$ $ab$, was confirmed, which suggests that infinite-layer nickelates also have great application potential. The anisotropy of $H_{\rm{c2}}$ monotonically decreases from $\sim$ 10 near $T_{\rm{c}}$ to $\sim$ 1.5 at 2 K. Angle dependence of $H_{\rm{c2}}$ confirms the crossover of superconductivity from two-dimensional (2D) to three-dimensional (3D) as the temperature decreases. We discussed that the interstitial orbital effect causes the weakening of anisotropy. The observed abnormal upturning of $H_{\rm{c2}}$ at low temperatures is found to be a universal behavior independent of film quality and rare earth elements. Therefore, it should not be the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state due to the fact that it is in the dirty limit and insensitive to disorder. △ Less

Submitted 27 April, 2023; originally announced April 2023.

Comments: 8 pages, 5 figures

Journal ref: Phys. Rev. B 107, L220503 2023 (Editors' Suggestion)

Observation of colossal topological Hall effect in noncoplanar ferromagnet Cr5Te6 thin films

Authors: Yequan Chen, Yingmei Zhu, Renju Lin, Wei Niu, Ruxin Liu, Wenzhuo Zhuang, Xu Zhang, **ghua Liang, Wenxuan Sun, Zhongqiang Chen, Yongsheng Hu, Fengqi Song, Jian Zhou, Di Wu, Binghui Ge, Hongxin Yang, Rong Zhang, Xuefeng Wang

Abstract: The topological Hall effect (THE) is critical to the exploration of the spin chirality generated by the real-space Berry curvature, which has attracted worldwide attention for its prospective applications in spintronic devices. However, the prominent THE remains elusive at room temperature, which severely restricts the practical integration of chiral spin textures. Here, we show a colossal intrins… ▽ More The topological Hall effect (THE) is critical to the exploration of the spin chirality generated by the real-space Berry curvature, which has attracted worldwide attention for its prospective applications in spintronic devices. However, the prominent THE remains elusive at room temperature, which severely restricts the practical integration of chiral spin textures. Here, we show a colossal intrinsic THE in large-area ferromagnet Cr5Te6 thin films epitaxially grown by pulsed laser deposition. Such a THE can be maintained until 270 K, which is attributed to the field-stimulated noncoplanar spin textures induced by the interaction of the in-plane ferromagnet and antiferromagnet infrastructures. Our first-principles calculations further verify the considerable Dzyaloshinskii-Moriya interaction in Cr5Te6. This work not only paves the way for robust chiral spin textures near room temperature in large-area low-dimensional ferromagnetic films for practical applications, but also facilitates the development of high-density and dissipationless spintronic devices. △ Less

Submitted 23 April, 2023; originally announced April 2023.

Comments: 18 pages, 13 figures, 1 table

Journal ref: Advanced Functional Materials 33, 2302984 (2023)

Navigating phase diagram complexity to guide robotic inorganic materials synthesis

Authors: Jiadong Chen, Samuel R. Cross, Lincoln J. Miara, Jeong-Ju Cho, Yan Wang, Wenhao Sun

Abstract: Efficient synthesis recipes are needed both to streamline the manufacturing of complex materials and to accelerate the realization of theoretically predicted materials. Oftentimes the solid-state synthesis of multicomponent oxides is impeded by undesired byproduct phases, which can kinetically trap reactions in an incomplete non-equilibrium state. We present a thermodynamic strategy to navigate hi… ▽ More Efficient synthesis recipes are needed both to streamline the manufacturing of complex materials and to accelerate the realization of theoretically predicted materials. Oftentimes the solid-state synthesis of multicomponent oxides is impeded by undesired byproduct phases, which can kinetically trap reactions in an incomplete non-equilibrium state. We present a thermodynamic strategy to navigate high-dimensional phase diagrams in search of precursors that circumvent low-energy competing byproducts, while maximizing the reaction energy to drive fast phase transformation kinetics. Using a robotic inorganic materials synthesis laboratory, we perform a large-scale experimental validation of our precursor selection principles. For a set of 35 target quaternary oxides with chemistries representative of intercalation battery cathodes and solid-state electrolytes, we perform 224 reactions spanning 27 elements with 28 unique precursors. Our predicted precursors frequently yield target materials with higher phase purity than when starting from traditional precursors. Robotic laboratories offer an exciting new platform for data-driven experimental science, from which we can develop new insights into materials synthesis for both robot and human chemists. △ Less

Submitted 19 April, 2023; v1 submitted 3 April, 2023; originally announced April 2023.

Solution-phase single-particle spectroscopy for probing multi-polaronic dynamics in quantum emitters at femtosecond resolution

Authors: Jiaojian Shi, Yuejun Shen, Feng Pan, Weiwei Sun, Anudeep Mangu, Cindy Shi, Amy McKeown-Green, Parivash Moradifar, Moungi G. Bawendi, William E. Moerner, Jennifer A. Dionne, Fang Liu, Aaron M. Lindenberg

Abstract: The development of many optical quantum technologies depends on the availability of solid-state single quantum emitters with near-perfect optical coherence. However, a standing issue that limits systematic improvement is the significant sample heterogeneity and lack of mechanistic understanding of microscopic energy flow at the single emitter level and ultrafast timescales. Here we develop solutio… ▽ More The development of many optical quantum technologies depends on the availability of solid-state single quantum emitters with near-perfect optical coherence. However, a standing issue that limits systematic improvement is the significant sample heterogeneity and lack of mechanistic understanding of microscopic energy flow at the single emitter level and ultrafast timescales. Here we develop solution-phase single-particle pump-probe spectroscopy with photon correlation detection that captures sample-averaged dynamics in single molecules and/or defect states with unprecedented clarity at femtosecond resolution. We apply this technique to single quantum emitters in two-dimensional hexagonal boron nitride, which suffers from significant heterogeneity and low quantum efficiency. From millisecond to nanosecond timescales, the translation diffusion, metastable-state-related bunching shoulders, rotational dynamics, and antibunching features are disentangled by their distinct photon-correlation timescales, which collectively quantify the normalized two-photon emission quantum yield. Leveraging its femtosecond resolution, spectral selectivity and ultralow noise (two orders of magnitude improvement over solid-state methods), we visualize electron-phonon coupling in the time domain at the single defect level, and discover the acceleration of polaronic formation driven by multi-electron excitation. Corroborated with results from a theoretical polaron model, we show how this translates to sample-averaged photon fidelity characterization of cascaded emission efficiency and optical decoherence time. Our work provides a framework for ultrafast spectroscopy in single emitters, molecules, or defects prone to photoluminescence intermittency and heterogeneity, opening new avenues of extreme-scale characterization and synthetic improvements for quantum information applications. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Comments: 35 pages, 4 figures

Hot Brownian Motion of thermoresponsive microgels in optical tweezers shows discontinuous volume phase transition and bistability

Authors: Miguel Angel Fernandez-Rodriguez, Sergio Orozco-Barrera, Wei Sun, Francisco Gámez, Carlos Caro, María L. García-Martín, Raúl Alberto Rica

Abstract: Microgels are soft microparticles that often exhibit thermoresponsiveness and feature a transformation at a critical temperature, referred to as the volume phase transition temperature. The question of whether this transformation occurs as a smooth or as a discontinuous one is still a matter of debate. This question can be addressed by studying individual microgels trapped in optical tweezers. For… ▽ More Microgels are soft microparticles that often exhibit thermoresponsiveness and feature a transformation at a critical temperature, referred to as the volume phase transition temperature. The question of whether this transformation occurs as a smooth or as a discontinuous one is still a matter of debate. This question can be addressed by studying individual microgels trapped in optical tweezers. For this aim, composite particles were obtained by decorating pNIPAM microgels with iron oxide nanocubes. These composites become self-heating when illuminated by the infrared trap** laser, featuring Hot Brownian Motion within the trap. Above a certain laser power, a single decorated microgel features a volume phase transition that is discontinuous, while the usual continuous sigmoidal-like dependence is recovered after averaging over different microgels. The collective sigmoidal behavior enables the application of a power-to-temperature calibration and provides the effective drag coefficient of the self-heating microgels, thus establishing these composite particles as potential micro-thermometers and micro-heaters. Moreover, the self-heating microgels also exhibit an unexpected and intriguing bistability behavior above the critical temperature, probably due to partial collapses of the microgel. These results set the stage for further studies and the development of applications based on the Hot Brownian Motion of soft particles. △ Less

Submitted 27 February, 2023; originally announced February 2023.

Journal ref: Small 2023

Manipulating solid-state spin concentration through charge transport

Authors: Guoqing Wang, Changhao Li, Hao Tang, Boning Li, Francesca Madonini, Faisal F Alsallom, Won Kyu Calvin Sun, Pai Peng, Federica Villa, Ju Li, Paola Cappellaro

Abstract: Solid-state spin defects are attractive candidates for develo** quantum sensors and simulators. The spin and charge degrees of freedom in large defect ensembles are a promising platform to explore complex many-body dynamics and the emergence of quantum hydrodynamics. However, many interesting properties can be revealed only upon changes in the density of defects, which instead is usually fixed i… ▽ More Solid-state spin defects are attractive candidates for develo** quantum sensors and simulators. The spin and charge degrees of freedom in large defect ensembles are a promising platform to explore complex many-body dynamics and the emergence of quantum hydrodynamics. However, many interesting properties can be revealed only upon changes in the density of defects, which instead is usually fixed in material systems. Increasing the interaction strength by creating denser defect ensembles also brings more decoherence. Ideally one would like to control the spin concentration at will, while kee** fixed decoherence effects. Here we show that by exploiting charge transport, we can take some first steps in this direction, while at the same time characterizing charge transport and its capture by defects. By exploiting the cycling process of ionization and recombination of NV centers in diamonds, we pump electrons from the valence band to the conduction band. These charges are then transported to modulate the spin concentration by changing the charge state of material defects. By develo** a wide-field imaging setup integrated with a fast single photon detector array, we achieve a direct and efficient characterization of the charge redistribution process by measuring the complete spectrum of the spin bath with micrometer-scale spatial resolution. We demonstrate the concentration increase of the dominant spin defects by a factor of 2 while kee** the $T_2$ of the NV center, which also provides a potential experimental demonstration of the suppression of spin flip-flops via hyperfine interactions. Our work paves the way to studying many-body dynamics with temporally and spatially tunable interaction strengths in hybrid charge-spin systems. △ Less

Submitted 26 February, 2023; v1 submitted 24 February, 2023; originally announced February 2023.

Evaluation of methods for the determination of tortuosity of Li-ion battery separators

Authors: Wei Sun, Q. M. Li, ** Xiao, Paola Carbone

Abstract: The porosities and tortuosities are commonly utilized to characterize the microstructure of a Li-ion battery's separator and are adopted as key input parameters in advanced battery models. Herein, a general classification of the tortuosity for a porous medium is introduced based on its bi-fold significance, i.e., the geometrical and physical tortuosities. Then, three different methods for the dete… ▽ More The porosities and tortuosities are commonly utilized to characterize the microstructure of a Li-ion battery's separator and are adopted as key input parameters in advanced battery models. Herein, a general classification of the tortuosity for a porous medium is introduced based on its bi-fold significance, i.e., the geometrical and physical tortuosities. Then, three different methods for the determination of separator's electrical tortuosity are introduced and compared, which include the empirical Bruggeman equation, the experimental method using Electrochemical Impedance Spectrum (EIS) testing a the numerical method using realistic 3D microstructure of the separator obtained from nanoscale X-ray Computed Tomography (XCT). In addition, the connection between the geometrical tortuosity and the electrical tortuosity of a separator is established by introducing the electrical phenomenological factor (\b{eta}_e), which can facilitate the understanding of the relationship between the microstructure characteristics and transport properties of the separators. Furthermore, to quantitively compare the values of the tortuosities determined by different methods, the corresponding effective transport coefficients (δ) are compared, which was usually used as a correction for effective diffusivity and conductivity of electrolytes in porous media. △ Less

Submitted 9 December, 2022; originally announced December 2022.

Comments: 30 pages, 6 figures, submitted to journal of energy storage

Observation of ultraslow hole dynamics in the 3D topological insulator Bi2Se3 coated with a thin MgF2 layer using multiphoton pumped UV-Vis transient absorption spectroscopy

Authors: Yuri D. Glinka, Tingchao He, Xiao Wei Sun

Abstract: Individual relaxation dynamics of electrons and holes in optically pumped semiconductors is rarely observed due to their overlap. Here we report the individual dynamics of long-lived (~200 mks) holes observed at room temperature in a 10 nm thick film of the 3D topological insulator (TI) Bi2Se3 coated with a 10 nm thick MgF2 layer using transient absorption spectroscopy in the UV-Vis region. The ul… ▽ More Individual relaxation dynamics of electrons and holes in optically pumped semiconductors is rarely observed due to their overlap. Here we report the individual dynamics of long-lived (~200 mks) holes observed at room temperature in a 10 nm thick film of the 3D topological insulator (TI) Bi2Se3 coated with a 10 nm thick MgF2 layer using transient absorption spectroscopy in the UV-Vis region. The ultraslow hole dynamics was observed by applying multiphoton resonant pum** of massless Dirac fermions and bound valence electrons in Bi2Se3 at a certain wavelength sufficient for their photoemission and subsequent trap** at the Bi2Se3/MgF2 interface. The emerging deficit of electrons in the film makes it impossible for the remaining holes to recombine, thus causing their ultraslow dynamics measured at a specific probing wavelength. We also found an extremely long rise time (~600 ps) for this ultraslow optical response, which is due to the large spin-orbit coupling (SOC) splitting at the valence band maximum and the resulting intervalley scattering between the splitting components. The ultraslow hole dynamics in Bi2Se3 due to the presence of the Bi2Se3/MgF2 interface is nevertheless much faster than the known ultraslow electron dynamics at the Si/SiO2 interface, also induced by multiphoton excitation in Si. The observed dynamics of long-lived holes is gradually suppressed with decreasing Bi2Se3 film thickness for the 2D TI Bi2Se3 (film thickness 5, 4, and 2 nm) due to the loss of resonance conditions for multiphoton photoemission caused by the gap opening at the Dirac surface state nodes. This behavior indicates that the dynamics of massive Dirac fermions predominantly determines the relaxation of photoexcited carriers for both the 2D topologically nontrivial and 2D topologically trivial insulator phases. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Stacking dependent ferroelectricity and antiferroelectricity in quasi-one-dimensional oxyhalides NbO$X_3$

Authors: Wencong Sun, Ning Ding, Jun Chen, Hai-Peng You, ** Peng, Shan-Shan Wang, Shuai Dong

Abstract: Low-dimensional ferroelectricity and polar materials have attracted considerable attentions for their fascinating physics and potential applications. Based on first-principles calculations, here we investigate the stacking modes and polar properties of a typical series of quasi-one-dimensional ferroelectrics: double-chain oxyhalides NbO$X_3$ ($X$=Cl, Br, I). The geometry of their double-chains all… ▽ More Low-dimensional ferroelectricity and polar materials have attracted considerable attentions for their fascinating physics and potential applications. Based on first-principles calculations, here we investigate the stacking modes and polar properties of a typical series of quasi-one-dimensional ferroelectrics: double-chain oxyhalides NbO$X_3$ ($X$=Cl, Br, I). The geometry of their double-chains allows both the interchain/intrachain permutation. Thus, different stacking modes of double-chains lead to a variety of ferroelectric and antiferroelectric phases in both the tetragonal and monoclinic crystals. The proximate energies of these phases may lead to multiphase coexistence in real materials, as well as the hydrostatic pressure driving structural phase transition. Their spontaneous polarizations and piezoelectricity of the ferroelectric phases are prominent, comparable to commercially used ferroelectric BaTiO$_3$ and piezoelectric ZnO, respectively. Our work demonstrates that the van der Waals NbO$X_3$ are promising materials for exploring quasi-one-dimensional ferroelectricity and antiferroelectricity. △ Less

Submitted 7 October, 2022; v1 submitted 26 September, 2022; originally announced September 2022.

Comments: 7 pages, 5 figures

Journal ref: Phys. Rev. Materials 6, 104404 (2022)

Geometric deep learning for computational mechanics Part II: Graph embedding for interpretable multiscale plasticity

Authors: Nikolaos N. Vlassis, WaiChing Sun

Abstract: The history-dependent behaviors of classical plasticity models are often driven by internal variables evolved according to phenomenological laws. The difficulty to interpret how these internal variables represent a history of deformation, the lack of direct measurement of these internal variables for calibration and validation, and the weak physical underpinning of those phenomenological laws have… ▽ More The history-dependent behaviors of classical plasticity models are often driven by internal variables evolved according to phenomenological laws. The difficulty to interpret how these internal variables represent a history of deformation, the lack of direct measurement of these internal variables for calibration and validation, and the weak physical underpinning of those phenomenological laws have long been criticized as barriers to creating realistic models. In this work, geometric machine learning on graph data (e.g. finite element solutions) is used as a means to establish a connection between nonlinear dimensional reduction techniques and plasticity models. Geometric learning-based encoding on graphs allows the embedding of rich time-history data onto a low-dimensional Euclidean space such that the evolution of plastic deformation can be predicted in the embedded feature space. A corresponding decoder can then convert these low-dimensional internal variables back into a weighted graph such that the dominating topological features of plastic deformation can be observed and analyzed. △ Less

Submitted 30 July, 2022; originally announced August 2022.

Comments: 34 pages, 23 figures

Data-driven discovery of quasi-disordered mechanical metamaterials failed progressively

Authors: Akash Singh Bhuwal, Yong Pang, Ian Ashcroft, Wei Sun, Tao Liu

Abstract: Natural cellular materials, such as honeycombs, woods, foams, trabecular bones, plant parenchyma, and sponges, may benefit from the disorderliness within their internal microstructures to achieve damage tolerant behaviours. Inspired by this, we have created quasi-disordered truss metamaterials (QTMs) via introducing spatial coordinate perturbations or strut thickness variations to the perfect, per… ▽ More Natural cellular materials, such as honeycombs, woods, foams, trabecular bones, plant parenchyma, and sponges, may benefit from the disorderliness within their internal microstructures to achieve damage tolerant behaviours. Inspired by this, we have created quasi-disordered truss metamaterials (QTMs) via introducing spatial coordinate perturbations or strut thickness variations to the perfect, periodic truss lattices. Numerical studies have suggested that the QTMs can exhibit either ductile, damage tolerant behaviours or sudden, catastrophic failure mode, depending on the distribution of the introduced disorderliness. A data-driven approach has been developed, combining deep-learning and global optimization algorithms, to tune the distribution of the disorderliness to achieve the damage tolerant QTM designs. A case study on the QTMs created from a periodic Face Centred Cubic (FCC) lattice has demonstrated that the optimised QTMs can achieve up to 100% increase in ductility at the expense of less than 5% stiffness and less than 10% tensile strength. Our results suggest a novel design pathway for architected materials to improve damage tolerance. △ Less

Submitted 20 July, 2022; v1 submitted 11 July, 2022; originally announced July 2022.

Comments: 33 pages; 5 main figures, 15 supplementary figures

MSC Class: 74S20; 65Y10

Ferromagnetic MnBi4Te7 obtained with low concentration Sb do**: A promising platform for exploring topological quantum states

Authors: Y. D. Guan, C. H. Yan, S. H. Lee, X. Gui, W. Ning, J. L. Ning, Y. L. Zhu, M. Kothakonda, C. Q. Xu, X. L. Ke, J. W. Sun, W. W. Xie, S. L. Yang, Z. Q. Mao

Abstract: The tuning of magnetic phase, chemical potential, and structure is crucial to observe diverse exotic topological quantum states in $MnBi_2Te_4(Bi_2Te_3)_m$ (m = 0, 1, 2, & 3). Here we show a ferromagnetic (FM) phase with a chiral crystal structure in $Mn(Bi_{1-x}Sb_x)_4Te_7$, obtained via tuning the growth conditions and Sb concentration. Unlike previously reported $Mn(Bi_{1-x}Sb_x)_4Te_7$, which… ▽ More The tuning of magnetic phase, chemical potential, and structure is crucial to observe diverse exotic topological quantum states in $MnBi_2Te_4(Bi_2Te_3)_m$ (m = 0, 1, 2, & 3). Here we show a ferromagnetic (FM) phase with a chiral crystal structure in $Mn(Bi_{1-x}Sb_x)_4Te_7$, obtained via tuning the growth conditions and Sb concentration. Unlike previously reported $Mn(Bi_{1-x}Sb_x)_4Te_7$, which exhibits FM transitions only at high Sb do** levels, our samples show FM transitions ($T_C$ = 13.5 K) at 15%-27% do** levels. Furthermore, our single crystal x-ray diffraction structure refinements find Sb do** leads to a chiral structure with the space group of P3, contrasted with the centrosymmetric P-3m1 crystal structure of the parent compound $MnBi_4Te_7$. Through ARPES measurements, we also demonstrated that the non-trivial band topology is preserved in the Sb-doped FM samples. Given that the non-trivial band topology of this system remains robust for low Sb do** levels, our success in making FM $Mn(Bi_{1-x}Sb_x)_4Te_7$ with $x$ = 0.15, 0.175, 0.2 & 0.27 paves the way for realizing the predicted topological quantum states such as axion insulator and Weyl semimetals. Additionally, we also observed magnetic glassy behavior in both antiferromagnetic $MnBi_4Te_7$ and FM $Mn(Bi_{1-x}Sb_x)_4Te_7$ samples, which we believe originates from cluster spin glass phases coexisting with long-range AFM/FM orders. We have also discussed how the antisite Mn ions impact the interlayer magnetic coupling and how FM interlayer coupling is stabilized in this system. △ Less

Submitted 4 May, 2022; originally announced May 2022.

Comments: 37 Pages, 7 Figures and 2 Tables. Supplementary Materials is included

Journal ref: Phys. Rev. Materials 6, 054203 (2022)

Evidence for quasi-two-dimensional superconductivity in infinite-layer nickelates

Authors: Wenjie Sun, Yueying Li, Ruxin Liu, Jiangfeng Yang, Jiayi Li, Shengjun Yan, Haoying Sun, Wei Guo, Zhengbin Gu, Yu Deng, Xuefeng Wang, Yuefeng Nie

Abstract: After being expected as a promising analogue to cuprates for decades, superconductivity was recently discovered in infinite-layer nickelates, providing new opportunities to explore mechanisms of high-temperature superconductivity. However, in sharp contrast to the single-band quasi-two-dimensional superconductivity in cuprates, nickelates exhibit a multi-band electronic structure and an unexpected… ▽ More After being expected as a promising analogue to cuprates for decades, superconductivity was recently discovered in infinite-layer nickelates, providing new opportunities to explore mechanisms of high-temperature superconductivity. However, in sharp contrast to the single-band quasi-two-dimensional superconductivity in cuprates, nickelates exhibit a multi-band electronic structure and an unexpected isotropic superconductivity as reported recently, which challenges the cuprate-like picture in nickelates. Here, we show the superconductivity in nickelates is actually anisotropic and quasi-two-dimensional in nature, as that in cuprates. By synthesizing high-quality lanthanide nickelate films with enhanced crystallinity and superconductivity ($T_{c}^{onset}$ = 18.8 K, $T_{c}^{zero}$ = 16.5 K), strong anisotropic magnetotransport behaviors have been observed. The quasi-two-dimensional nature is further confirmed by the existence of a cusp-like peak of the angle-dependent $T_{c}$, and a Berezinskii-Kosterlitz-Thouless transition near $T_{c}$. Our work thus suggests a quasi-two-dimensional superconductivity in infinite-layer nickelates, implying a single-3$d_{x^2-y^2}$-band cuprate-like picture may remain valid in these compounds. △ Less

Submitted 27 April, 2022; originally announced April 2022.

Comments: 32 pages, 4 main figures, 6 extended data

Journal ref: Adv. Mater. 2023, 2303400

Quantum phase with coexisting localized, extended, and critical zones

Authors: Yucheng Wang, Long Zhang, Wei Sun, Ting-Fung Jeffrey Poon, Xiong-Jun Liu

Abstract: Conventionally a mobility edge (ME) marks a critical energy that separates two different transport zones where all states are extended and localized, respectively. Here we propose a novel quasiperiodic spin-orbit coupled lattice model with experimental feasibility to realize a fundamentally new quantum phase with three coexisting energy-dependent zones, i.e., the extended, critical and localized z… ▽ More Conventionally a mobility edge (ME) marks a critical energy that separates two different transport zones where all states are extended and localized, respectively. Here we propose a novel quasiperiodic spin-orbit coupled lattice model with experimental feasibility to realize a fundamentally new quantum phase with three coexisting energy-dependent zones, i.e., the extended, critical and localized zones, and uncover the underlying generic mechanism for the occurrence of the new quantum phase. Accordingly, this phase exhibits new types of MEs which separate the extended states from critical ones, and the localized states from critical ones, respectively. We introduce the diagnostic quantities to characterize and distinguish the different zones, and show that the predicted phase can be detected by measuring the fractal dimension or conductivities. The experimental realization is also proposed and studied. This work extends the concept of ME and enriches the quantum phases in disordered systems, which sheds light on searching for new localization and critical phenomena with novel transport and thermoelectric effects. △ Less

Submitted 11 August, 2022; v1 submitted 14 February, 2022; originally announced February 2022.

Journal ref: Phys. Rev. B 106, L140203 (2022)

Two-photon IR pumped UV-Vis transient absorption spectroscopy of Dirac fermions in the 2D and 3D topological insulator Bi2Se3

Authors: Yuri D. Glinka, Tingchao He, Xiao Wei Sun

Abstract: It is often taken for granted that in pump-probe experiments on the topological insulator (TI) Bi2Se3 using IR pum** with a commercial Ti:Sapphire laser [~800 nm (1.55 eV photon energy)], the electrons are excited in the one-photon absorption regime, even when pumped with absorbed fluences in the mJ cm-2 range. Here, using UV-Vis transient absorption (TA) spectroscopy, we show that even at low-p… ▽ More It is often taken for granted that in pump-probe experiments on the topological insulator (TI) Bi2Se3 using IR pum** with a commercial Ti:Sapphire laser [~800 nm (1.55 eV photon energy)], the electrons are excited in the one-photon absorption regime, even when pumped with absorbed fluences in the mJ cm-2 range. Here, using UV-Vis transient absorption (TA) spectroscopy, we show that even at low-power IR pum** with absorbed fluences in the mkJ cm-2 range, the TA spectra of the TI Bi2Se3 extend across a part of the UV and the entire visible region. This observation suggests unambiguously that the two-photon pum** regime accompanies the usual one-photon pum** regime even at low laser powers applied. We attribute the high efficiency of two-photon pum** to the giant nonlinearity of Dirac fermions in the Dirac surface states (SS). On the contrary, one-photon pum** is associated with the excitation of bound valence electrons in the bulk into the conduction band. Two mechanisms of absorption bleaching were also revealed since they manifest themselves in different spectral regions of probing. These two mechanisms were assigned to the filling of the phase-space in the Dirac SS and bulk states and the corresponding Pauli blocking. △ Less

Submitted 27 July, 2022; v1 submitted 19 December, 2021; originally announced December 2021.

Dataset of Solution-based Inorganic Materials Synthesis Recipes Extracted from the Scientific Literature

Authors: Zheren Wang, Olga Kononova, Kevin Cruse, Tan** He, Haoyan Huo, Yuxing Fei, Yan Zeng, Yingzhi Sun, Zijian Cai, Wenhao Sun, Gerbrand Ceder

Abstract: The development of a materials synthesis route is usually based on heuristics and experience. A possible new approach would be to apply data-driven approaches to learn the patterns of synthesis from past experience and use them to predict the syntheses of novel materials. However, this route is impeded by the lack of a large-scale database of synthesis formulations. In this work, we applied advanc… ▽ More The development of a materials synthesis route is usually based on heuristics and experience. A possible new approach would be to apply data-driven approaches to learn the patterns of synthesis from past experience and use them to predict the syntheses of novel materials. However, this route is impeded by the lack of a large-scale database of synthesis formulations. In this work, we applied advanced machine learning and natural language processing techniques to construct a dataset of 35,675 solution-based synthesis "recipes" extracted from the scientific literature. Each recipe contains essential synthesis information including the precursors and target materials, their quantities, and the synthesis actions and corresponding attributes. Every recipe is also augmented with the reaction formula. Through this work, we are making freely available the first large dataset of solution-based inorganic materials synthesis recipes. △ Less

Submitted 21 November, 2021; originally announced November 2021.

Coherent surface-to-bulk vibrational coupling in the 2D topologically trivial insulator Bi2Se3 monitored by ultrafast transient absorption spectroscopy

Authors: Yuri D. Glinka, Tingchao He, Xiao Wei Sun

Abstract: Ultrafast carrier relaxation in the 2D topological insulator (TI) Bi2Se3 [gapped Dirac surface states (SS)] and how it inherits ultrafast relaxation in the 3D TI Bi2Se3 (gapless Dirac SS) remains a challenge for develo** new optoelectronic devices based on these materials. Here ultrashort (100 fs) pum** pulses of ~340 nm wavelength (~3.65 eV photon energy) were applied to study ultrafast elect… ▽ More Ultrafast carrier relaxation in the 2D topological insulator (TI) Bi2Se3 [gapped Dirac surface states (SS)] and how it inherits ultrafast relaxation in the 3D TI Bi2Se3 (gapless Dirac SS) remains a challenge for develo** new optoelectronic devices based on these materials. Here ultrashort (100 fs) pum** pulses of ~340 nm wavelength (~3.65 eV photon energy) were applied to study ultrafast electron relaxation in the 2D TI Bi2Se3 films with a thickness of 2 and 5 quintuple layers (~2 and ~5 nm, respectively) using transient absorption (TA) spectroscopy in the ultraviolet-visible spectral region (1.65 - 3.85 eV). The negative and positive contributions of TA spectra were attributed to absorption bleaching that mostly occur in the bulk states and to the inverse bremsstrahlung type free carrier absorption in the surface states, respectively. Owing to this direct and selective access to the bulk and surface carrier dynamics, we were able to monitor coherent longitudinal optical (LO) phonon oscillations, which were successively launched in the bulk and surface states by the front of the relaxing electron population within the LO-phonon cascade emission. We have also recognized the coherent surface-to-bulk vibrational coupling that appears through the phase-dependent amplitude variations of coherent LO-phonon oscillations. This unique behavior manifests itself predominantly for the topologically trivial insulator phase of the 2D TI Bi2Se3 (2 nm thick film) in the photon energy range (~2.0 - 2.25 eV) where efficient energy exchange between the bulk and surface states occurs. We also found that the coherent surface-to-bulk vibrational coupling significantly weakens with increasing both the Bi2Se3 film thickness and pum** power. △ Less

Submitted 23 March, 2022; v1 submitted 9 November, 2021; originally announced November 2021.

Surface band segregation and internal convection in rotating sphere densely filled with granular material: Experiments

Authors: Weitao Sun

Abstract: While granular segregation in partially filled containers has been studied extensively, granular dynamics in densely filled spheres is not fully understood. Here, surface band segregation and granular convection are reported in a rotating sphere of highly compacted glass beads. Distinct from Rayleigh-Benard convection, granular convection has a butterfly-shaped structure with vortexes of alternati… ▽ More While granular segregation in partially filled containers has been studied extensively, granular dynamics in densely filled spheres is not fully understood. Here, surface band segregation and granular convection are reported in a rotating sphere of highly compacted glass beads. Distinct from Rayleigh-Benard convection, granular convection has a butterfly-shaped structure with vortexes of alternating layers of small/large beads, which is stable and independent of the sphere size. Two concentric interfaces at the zero tangential/norm flux are discovered, which divide the sphere into three layers from the surface to the core. The law that governs the jamming dynamics in rotating spheres remains an open question. △ Less

Submitted 19 September, 2021; v1 submitted 23 August, 2021; originally announced August 2021.

Comments: 14 pages, 9 figures

Epitaxial growth of Ruddlesden-Popper neodymium nickelates Nd$_{n+1}$Ni$_{n}$O$_{3n+1}$ (${n}$ = 1-5)

Authors: Wenjie Sun, Yueying Li, Xiangbin Cai, Jiangfeng Yang, Wei Guo, Zhengbin Gu, Ye Zhu, Yuefeng Nie

Abstract: A series of Ruddlesden-Popper nickelates, Nd$_{n+1}$Ni$_{n}$O$_{3n+1}$ (${n}$ = 1-5), have been stabilized in thin film form using reactive molecular-beam epitaxy. High crystalline quality has been verified by X-ray diffraction and scanning transmission electron microscopy. X-ray photoelectron spectroscopy indicates the ${n}$-dependent valence states of nickel in these compounds. Metal-insulator t… ▽ More A series of Ruddlesden-Popper nickelates, Nd$_{n+1}$Ni$_{n}$O$_{3n+1}$ (${n}$ = 1-5), have been stabilized in thin film form using reactive molecular-beam epitaxy. High crystalline quality has been verified by X-ray diffraction and scanning transmission electron microscopy. X-ray photoelectron spectroscopy indicates the ${n}$-dependent valence states of nickel in these compounds. Metal-insulator transitions show clear ${n}$ dependence for intermediate members (${n}$ = 3-5), and the low-temperature resistivities of which show logarithmic dependence, resembling the Kondo-scattering as observed in the parent compounds of superconducting infinite-layer nickelates. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: 12 pages, 4 figures

Journal ref: PRB 104, 184518 (2021)

Dynamic Opening of a Gap in Dirac Surface States of the Thin-Film 3D Topological Insulator Bi2Se3 Driven by the Dynamic Rashba Effect

Authors: Yuri D. Glinka, Tingchao He, Xiao Wei Sun

Abstract: Optical control of Dirac surface states (SS) in topological insulators (TI) remains one of the most challenging problems governing their potential applications in novel electronic and spintronic devices. Here, using visible-range transient absorption spectroscopy exploiting ~340 nm (~3.65 eV) pum**, we provide evidence for dynamic opening of a gap in Dirac SS of the thin-film 3D TI Bi2Se3, which… ▽ More Optical control of Dirac surface states (SS) in topological insulators (TI) remains one of the most challenging problems governing their potential applications in novel electronic and spintronic devices. Here, using visible-range transient absorption spectroscopy exploiting ~340 nm (~3.65 eV) pum**, we provide evidence for dynamic opening of a gap in Dirac SS of the thin-film 3D TI Bi2Se3, which has been induced by the dynamic Rashba effect occurring in the film bulk with increasing optical pum** power (photoexcited carrier density). The observed effect appears through the transient absorption band associated with inverse-bremsstrahlung-type free carrier absorption in the gapped Dirac SS. We have also recognized experimental signatures of the existence of the higher energy Dirac SS in the 3D TI Bi2Se3 (in addition to those known as SS1 and SS2) with energies of ~2.7 and ~3.9 eV (SS3 and SS4). It is evidenced that the dynamic gap opening has the same effect on the Dirac SS occurring at any energy. △ Less

Submitted 10 June, 2021; v1 submitted 7 June, 2021; originally announced June 2021.

Impact of Cation Stoichiometry on the Crystalline Structure and Superconductivity in Nickelates

Authors: Yueying Li, Wenjie Sun, Jiangfeng Yang, Xiangbin Cai, Wei Guo, Zhengbin Gu, Ye Zhu, Yuefeng Nie

Abstract: The recent discovery of superconductivity in infinite-layer nickelate films has aroused great interest since it provides a new platform to explore the mechanism of high-temperature superconductivity. However, superconductivity only appears in the thin film form and synthesizing superconducting nickelate films is extremely challenging, limiting the in-depth studies on this compound. Here, we explor… ▽ More The recent discovery of superconductivity in infinite-layer nickelate films has aroused great interest since it provides a new platform to explore the mechanism of high-temperature superconductivity. However, superconductivity only appears in the thin film form and synthesizing superconducting nickelate films is extremely challenging, limiting the in-depth studies on this compound. Here, we explore the critical parameters in the growth of high quality nickelate films using molecular beam epitaxy (MBE). We found that stoichiometry is crucial in optimizing the crystalline structure and realizing superconductivity in nickelate films. In precursor NdNiO3 films, optimal stoichiometry of cations yields the most compact lattice while off-stoichiometry of cations causes obvious lattice expansion, influencing the subsequent topotactic reduction and the emergence of superconductivity in infinite-layer nickelates. Surprisingly, in-situ reflection high energy electron diffraction (RHEED) indicates that some impurity phases always appear once Sr ions are doped into NdNiO3 although the X-ray diffraction (XRD) data are of high quality. While these impurity phases do not seem to suppress the superconductivity, their impacts on the electronic and magnetic structure deserve further studies. Our work demonstrates and highlights the significance of cation stoichiometry in superconducting nickelate family. △ Less

Submitted 4 June, 2021; originally announced June 2021.

Comments: 12 pages, 3 figures

Journal ref: Front. Phys. 9:719534 (2021)

The geometry of high-dimensional phase diagrams: I. Generalized Gibbs Phase Rule

Authors: Wenhao Sun, Matthew J. Powell-Palm, Jiadong Chen

Abstract: Phase diagrams are essential tools of the materials scientist, showing which phases are at equilibrium under a set of applied thermodynamic conditions. Essentially all phase diagrams today are two dimensional, typically constructed with axes of temperature-pressure or temperature-composition. For many modern materials, it would be valuable to construct phase diagrams that include additional forms… ▽ More Phase diagrams are essential tools of the materials scientist, showing which phases are at equilibrium under a set of applied thermodynamic conditions. Essentially all phase diagrams today are two dimensional, typically constructed with axes of temperature-pressure or temperature-composition. For many modern materials, it would be valuable to construct phase diagrams that include additional forms of thermodynamic work--such as elastic, surface, electromagnetic or electrochemical work, etc.--which grows the free energy of materials into higher (>3) dimensions. Here, we extend Gibbs' original arguments on phase coexistence to derive a generalized Phase Rule, based in the combinatorial geometry of high-dimensional convex polytopes. The generalized Phase Rule offers a conceptual and geometric foundation to describe phase boundaries on high-dimensional phase diagrams, which are relevant for understanding the stability of modern materials in complex chemical environments. We revisit Gibbs arguments on the equilibrium of heterogeneous substances and show that phase coexistence regions in high-dimensional Internal Energy space, U(S,Xi,...,Xj), are simplicial convex polytopes--which are N-dimensional analogues of triangles and tetrahedra. In the first of this three-part series, we examine how the combinatorial relationships between the vertices and facets of simplicial polytopes leads to a generalized high-dimensional description of Gibbs' Phase Rule. Because Gibbs' Phase Rule describes the nature of phase boundaries on phase diagrams, this isomorphism between the physical principles of equilibrium thermodynamics and the geometry of simplicial polytopes provides the foundation to construct generalized phase diagrams, which can exist in any dimension, with any intensive or extensive thermodynamic variable on the axes. △ Less

Submitted 9 April, 2024; v1 submitted 4 May, 2021; originally announced May 2021.

All-optical fluorescence blinking control in quantum dots with ultrafast mid-infrared pulses

Authors: Jiaojian Shi, Weiwei Sun, Hendrik Utzat, Ardavan Farahvash, Frank Y. Gao, Zhuquan Zhang, Ulugbek Barotov, Adam P. Willard, Keith A. Nelson, Moungi G. Bawendi

Abstract: Photoluminescence (PL) intermittency is a ubiquitous phenomenon detrimentally reducing the temporal emission intensity stability of single colloidal quantum dots (CQDs) and the emission quantum yield of their ensembles. Despite efforts for blinking reduction via chemical engineering of the QD architecture and its environment, blinking still poses barriers to the application of QDs, particularly in… ▽ More Photoluminescence (PL) intermittency is a ubiquitous phenomenon detrimentally reducing the temporal emission intensity stability of single colloidal quantum dots (CQDs) and the emission quantum yield of their ensembles. Despite efforts for blinking reduction via chemical engineering of the QD architecture and its environment, blinking still poses barriers to the application of QDs, particularly in single-particle tracking in biology or in single-photon sources. Here, we demonstrate the first deterministic all-optical suppression of quantum dot blinking using a compound technique of visible and mid-infrared (MIR) excitation. We show that moderate-field ultrafast MIR pulses (5.5 $μ$m, 150 fs) can switch the emission from a charged, low quantum yield 'grey' trion state to the 'bright' exciton state in CdSe/CdS core-shell quantum dots resulting in a significant reduction of the QD intensity flicker. Quantum-tunneling simulations suggest that the MIR fields remove the excess charge from trions with reduced emission quantum yield to restore higher brightness exciton emission. Our approach can be integrated with existing single-particle tracking or super-resolution microscopy techniques without any modification to the sample and translates to other emitters presenting charging-induced PL intermittencies, such as single-photon emissive defects in diamond and two-dimensional materials. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Comments: 35 pages, 5 figures

Magnetic ordering of the distorted kagome antiferromagnet Y$_3$Cu$_9$(OH)$_{18}$[Cl$_8$(OH)] prepared via optimal synthesis

Authors: W. Sun, T. Arh, M. Gomilšek, P. Koželj, S. Vrtnik, M. Herak, J. -X. Mi, A. Zorko

Abstract: Experimental studies of high-purity kagome-lattice antiferromagnets (KAFM) are of great importance in attempting to better understand the predicted enigmatic quantum spin-liquid ground state of the KAFM model. However, realizations of this model can rarely evade magnetic ordering at low temperatures due to various perturbations to its dominant isotropic exchange interactions. Such a situation is f… ▽ More Experimental studies of high-purity kagome-lattice antiferromagnets (KAFM) are of great importance in attempting to better understand the predicted enigmatic quantum spin-liquid ground state of the KAFM model. However, realizations of this model can rarely evade magnetic ordering at low temperatures due to various perturbations to its dominant isotropic exchange interactions. Such a situation is for example encountered due to sizable Dzyaloshinskii-Moriya magnetic anisotropy in YCu$_3$(OH)$_6$Cl$_3$, which stands out from other KAFM materials by its perfect crystal structure. We find evidence of magnetic ordering also in the distorted sibling compound Y$_3$Cu$_9$(OH)$_{18}$[Cl$_8$(OH)], which has recently been proposed to feature a spin-liquid ground state arising from a spatially anisotropic kagome lattice. Our findings are based on a combination of bulk susceptibility, specific heat, and magnetic torque measurements that disclose a Néel transition temperature of $T_N=11$~K in this material, which might feature a coexistence of magnetic order and persistent spin dynamics as previously found in YCu$_3$(OH)$_6$Cl$_3$. Contrary to previous studies of single crystals and powders containing impurity inclusions, we use high-purity single crystals of Y$_3$Cu$_9$(OH)$_{18}$[Cl$_8$(OH)] grown via an optimized hydrothermal synthesis route that minimizes such inclusions. This study thus demonstrates that the lack of magnetic ordering in less pure samples of the investigated compound does not originate from the reduced symmetry of spin lattice but is instead of extrinsic origin. △ Less

Submitted 20 May, 2021; v1 submitted 24 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. Materials 5, 064401 (2021)

Indentation responses of pressurized ellipsoidal and cylindrical elastic shells: Insights from shallow-shell theory

Authors: Wenqian Sun, Jayson Paulose

Abstract: Pressurized elastic shells are ubiquitous in nature and technology, from the outer walls of yeast and bacterial cells to artificial pressure vessels. Indentation measurements simultaneously probe the internal pressure and elastic properties of thin shells, and serve as a useful tool for strength testing and for inferring internal biological functions of living cells. We study the effects of geomet… ▽ More Pressurized elastic shells are ubiquitous in nature and technology, from the outer walls of yeast and bacterial cells to artificial pressure vessels. Indentation measurements simultaneously probe the internal pressure and elastic properties of thin shells, and serve as a useful tool for strength testing and for inferring internal biological functions of living cells. We study the effects of geometry and pressure-induced stress on the indentation stiffness of ellipsoidal and cylindrical elastic shells using shallow-shell theory. We show that the linear indentation response reduces to a single integral with two dimensionless parameters that encode the asphericity and internal pressure. This integral can be numerically evaluated in all regimes and is used to generate compact analytical expressions for the indentation stiffness in various regimes of technological and biological importance. Our results provide theoretical support for previous scaling and numerical results describing the stiffness of ellipsoids, reveal a new pressure scale that dictates the large-pressure response, and give new insights to the linear indentation response of pressurized cylinders. △ Less

Submitted 5 August, 2021; v1 submitted 10 March, 2021; originally announced March 2021.

Comments: 17 pages, 5 figures

Journal ref: Phys. Rev. E 104, 025004 (2021)

Laser Cooling of Germanium Semiconductor Nanocrystals

Authors: Manuchehr Ebrahimi, Wei Sun, Amr S. Helmy, Nazir P. Kherani

Abstract: Laser cooling of matter through anti-Stokes photoluminescence, where the emitted frequency of light exceeds that of the im**ing laser by virtue of absorption of thermal vibrational energy, has been successfully realized in condensed media, and in particular with rare earth doped systems achieving sub-100K solid state optical refrigeration. Studies suggest that laser cooling in semiconductors has… ▽ More Laser cooling of matter through anti-Stokes photoluminescence, where the emitted frequency of light exceeds that of the im**ing laser by virtue of absorption of thermal vibrational energy, has been successfully realized in condensed media, and in particular with rare earth doped systems achieving sub-100K solid state optical refrigeration. Studies suggest that laser cooling in semiconductors has the potential of achieving temperatures down to ~10K and that its direct integration can usher unique high-performance nanostructured semiconductor devices. While laser cooling of nanostructured II-VI semiconductors has been reported recently, laser cooling of indirect bandgap semiconductors such as group IV silicon and germanium remains a major challenge. Here we report on the anomalous observation of dominant anti-Stokes photoluminescence in germanium nanocrystals. We attribute this result to the confluence of ultra-high purity nanocrystal germanium, generation of high density of electron-hole plasma, the inherent degeneracy of longitudinal and transverse optical phonons in non-polar indirect bandgap semiconductors, and commensurate spatial confinement effects. At high laser intensities, laser cooling with lattice temperature as low as ~50K is inferred. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Comments: 17 pages, 5 Figures

Clarifying ultrafast carrier dynamics in ultrathin films of the topological insulator Bi2Se3 using transient absorption spectroscopy

Authors: Yuri D. Glinka, Junzi Li, Tingchao He, Xiao Wei Sun

Abstract: Ultrafast carrier dynamics in the topological insulator Bi2Se3 have recently been intensively studied using a variety of techniques. However, we are not aware of any successful experiments exploiting transient absorption (TA) spectroscopy for these purposes. Here we demonstrate that if the ~730 nm wavelength pum** (~1.7 eV photon energy) is applied to ultrathin Bi2Se3 films, TA spectra cover the… ▽ More Ultrafast carrier dynamics in the topological insulator Bi2Se3 have recently been intensively studied using a variety of techniques. However, we are not aware of any successful experiments exploiting transient absorption (TA) spectroscopy for these purposes. Here we demonstrate that if the ~730 nm wavelength pum** (~1.7 eV photon energy) is applied to ultrathin Bi2Se3 films, TA spectra cover the entire visible region, thus unambiguously pointing to two-photon excitation (~3.4 eV). The carrier relaxation dynamics is found to be governed by the polar optical phonon cascade emission occurring in both the bulk states and the Dirac surface states (SS), including SS-bulk-SS vertical electron transport and being also exclusively influenced by whether the Dirac point is presented between the Dirac cones of the higher energy (~1.5 eV) Dirac SS (known as SS2). We have recognized that SS2 act as a valve substantially slowing down the relaxation of electrons when the gap between Dirac cones exceeds the polar optical phonon and resonant defects energies. The resulting progressive accumulation of electrons in the gapped SS2 becomes detectable through the inverse bremsstrahlung type free carrier absorption. △ Less

Submitted 27 May, 2021; v1 submitted 23 December, 2020; originally announced December 2020.

Visualizing Temperature-Dependent Phase Stability in High Entropy Alloys

Authors: Daniel Evans, Jiadong Chen, Geoffroy Hautier, Wenhao Sun

Abstract: High Entropy Alloys (HEAs) contain near equimolar amounts of five or more elements and are a compelling space for materials design. Great emphasis is placed on identifying HEAs that form a homogeneous solid-solution, but the design of such HEAs is hindered by the difficulty of navigating stability relationships in high-component spaces. Traditional phase diagrams use barycentric coordinates to rep… ▽ More High Entropy Alloys (HEAs) contain near equimolar amounts of five or more elements and are a compelling space for materials design. Great emphasis is placed on identifying HEAs that form a homogeneous solid-solution, but the design of such HEAs is hindered by the difficulty of navigating stability relationships in high-component spaces. Traditional phase diagrams use barycentric coordinates to represent composition axes, which require D = (N - 1) spatial dimensions to represent an N-component system, meaning that HEA systems with N > 4 components cannot be readily visualized. Here, we propose forgoing barycentric composition axes in favor of two energy axes: a formation-energy axis and a 'reaction energy' axis. These Inverse Hull Webs offer an information-dense 2D representation that successfully capture complex phase stability relationships in N > 4 component systems. We use our new diagrams to visualize the transition of HEA solid-solutions from high-temperature stability to metastability upon quenching, and identify important thermodynamic features that are correlated with the persistence or decomposition of metastable HEAs. △ Less

Submitted 16 April, 2021; v1 submitted 29 November, 2020; originally announced November 2020.

Comments: 18 pages, 5 figures

Magnetoresistance oscillation study of the half-quantum vortex in doubly connected mesoscopic superconducting cylinders of Sr2RuO4

Authors: Xinxin Cai, Brian M. Zakrzewski, Yiqun A. Ying, Hae-Young Kee, Manfred Sigrist, J. Elliott Ortmann, Weifeng Sun, Zhiqiang Mao, Ying Liu

Abstract: The observation of the highly unusual half-quantum vortex (HQV) in a single crystalline superconductor excludes unequivocally the spin-singlet symmetry of the superconducting order parameter. HQVs were observed previously in mesoscopic samples of Sr2RuO4 in cantilever torque magnetometry measurements, thus providing direct evidence for spin-triplet pairing in the material. In addition, it raised i… ▽ More The observation of the highly unusual half-quantum vortex (HQV) in a single crystalline superconductor excludes unequivocally the spin-singlet symmetry of the superconducting order parameter. HQVs were observed previously in mesoscopic samples of Sr2RuO4 in cantilever torque magnetometry measurements, thus providing direct evidence for spin-triplet pairing in the material. In addition, it raised important questions on HQV, including its stability and dynamics. These issues have remained largely unexplored, in particular, experimentally. We report in this paper the detection of HQVs in mesoscopic, doubly connected cylinders of single-crystalline Sr2RuO4 of a mesoscopic size and the examination of the effect of the in-plane magnetic field needed for the observation of the HQV by magnetoresistance (MR) oscillations measurements. Several distinct features found in our data, especially a dip and secondary peaks in the MR oscillations seen only in the presence of a sufficiently large in-plane magnetic field as well as a large measurement current, are linked to the formation of the HQV fluxoid state in and crossing of an Abrikosov HQV through the sample. The conclusion is drawn from the analysis of our data using a model of thermally activated vortex crossing overcoming a free-energy barrier which is modulated by the applied magnetic flux enclosed in the cylinder as well as the measurement current. Evidence for the trap** of an HQV fluxoid state in the sample was also found. Our observation of the HQV in mesoscopic Sr2RuO4 provided not only additional evidence for spin-triplet superconductivity in Sr2RuO4 but also insights into the physics of HQV, including its spontaneous spin polarization, stability, and dynamics. Our study also revealed a possible effect of the measurement current on the magnitude of the spontaneous spin polarization associated with the HQV. △ Less

Submitted 29 October, 2020; originally announced October 2020.

Comments: 17 pages and 7 figures

Journal ref: Phys. Rev. B 105, 224510 (2022)