Showing 1–31 of 31 results for author: Stephenson, L

Estimation of the electric field in atom probe tomography experiments using charge state ratios

Authors: Levi Tegg, Leigh T. Stephenson, Julie M. Cairney

Abstract: (Kingham 1982) provided equations for the probability of observing higher charge states in atom probe tomography (APT) experiments. These "Kingham curves" have wide application in APT, but cannot be analytically transformed to provide the electric field in terms of the easily-measured charge state ratio (CSR). Here we provide a numerical scheme for the calculation of Kingham curves and the variati… ▽ More (Kingham 1982) provided equations for the probability of observing higher charge states in atom probe tomography (APT) experiments. These "Kingham curves" have wide application in APT, but cannot be analytically transformed to provide the electric field in terms of the easily-measured charge state ratio (CSR). Here we provide a numerical scheme for the calculation of Kingham curves and the variation in electric field with CSR. We find the variation in electric field with CSR is well-described by a simple two or three-parameter equation, and the model is accurate to most elements and charge states. The model is applied to experimental APT data of pure aluminium and a microalloyed steel, demonstrating that the methods described in this work can be easily applied to a variety of APT problems to understand electric field variations. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Nanoporous gold thin films as substrates to analyze liquids by cryo-atom probe tomography

Authors: E. V. Woods, A. Saksena, A. A. El-Zoka, L. T. Stephenson, T. M. Schwarz, M. P. Singh, L. S. Aota, S. -H. Kim, J. Schneider, B. Gault

Abstract: Cryogenic atom probe tomography (cryo-APT) is being developed to enable nanoscale compositional analyses of frozen liquids. Yet, the availability of readily available substrates that allow for the fixation of liquids while providing sufficient strength to their interface, is still an issue. Here we propose the use of 1-2 microns thick binary alloy film of gold-silver (AuAg) sputtered onto flat sil… ▽ More Cryogenic atom probe tomography (cryo-APT) is being developed to enable nanoscale compositional analyses of frozen liquids. Yet, the availability of readily available substrates that allow for the fixation of liquids while providing sufficient strength to their interface, is still an issue. Here we propose the use of 1-2 microns thick binary alloy film of gold-silver (AuAg) sputtered onto flat silicon, with sufficient adhesion without an additional layer. Through chemical dealloying, we successfully fabricate a nanoporous substrate, with open-pore structure, which is mounted on a microarray of Si posts by lift out in the focused-ion beam, allowing for cryogenic fixation of liquids. We present cryo-APT results obtained after cryogenic sharpening, vacuum cryo-transfer and analysis of pure water on top and inside the nanoporous film. We demonstrate that this new substrate has the requisite characteristics for facilitating cryo-APT of frozen liquids, with a relatively lower volume of precious metals. This complete workflow represents an improved approach for frozen liquid analysis, from preparation of the films to the successful fixation of the liquid in the porous network, to cryo-atom probe tomography. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Scalable Substrate Development for Aqueous Biological Samples for Atom Probe Tomography

Authors: Eric V. Woods, Se-Ho Kim, Ayman A. El-Zoka, Leigh T. Stephenson, Baptiste Gault

Abstract: Reliable and consistent preparation of atom probe tomography (APT) specimens from aqueous and hydrated biological specimens remains a significant challenge. One particularly difficult process step is the use of a focused ion beam (FIB) instrument for preparing the required needle-shaped specimen, typically involving a "lift-out" procedure of a small sample of material. Here, two alternative substr… ▽ More Reliable and consistent preparation of atom probe tomography (APT) specimens from aqueous and hydrated biological specimens remains a significant challenge. One particularly difficult process step is the use of a focused ion beam (FIB) instrument for preparing the required needle-shaped specimen, typically involving a "lift-out" procedure of a small sample of material. Here, two alternative substrate designs are introduced that enable using FIB only for sharpening, along with example APT datasets. The first design is a laser-cut FIB-style half-grid close to those used for transmission-electron microscopy, that can be used in a grid holder compatible with APT pucks. The second design is a larger, standalone self-supporting substrate called a "crown", with several specimen positions that self-aligns in APT pucks, prepared by electrical discharge machining (EDM). Both designs are made nanoporous, to provide strength to the liquid-substrate interface, using chemical and vacuum dealloying. We select alpha brass a simple, widely available, lower-cost alternative to previously proposed substrates. We present the resulting designs, APT data, and provide suggestions to help drive wider community adoption. △ Less

Submitted 31 August, 2023; originally announced August 2023.

The fate of water in hydrogen-based iron oxide reduction

Authors: Ayman A. El-Zoka, Leigh T. Stephenson, Se-Ho Kim, Baptiste Gault, Dierk Raabe

Abstract: Gas-solid reactions are cornerstones of many catalytic and redox processes that will underpin the energy and sustainability transition. The specific case of hydrogen-based iron oxide reduction is the foundation to render the global steel industry fossil-free, an essential target as iron production is the largest single industrial emitter of carbon dioxide. Our perception of gas-solid reactions has… ▽ More Gas-solid reactions are cornerstones of many catalytic and redox processes that will underpin the energy and sustainability transition. The specific case of hydrogen-based iron oxide reduction is the foundation to render the global steel industry fossil-free, an essential target as iron production is the largest single industrial emitter of carbon dioxide. Our perception of gas-solid reactions has not only been limited by the availability of state-of-the-art techniques which can delve into the reacted solids in great structural and chemical detail, but we continue to miss an important reaction partner that defines the thermodynamics and kinetics of gas phase reactions: the gas molecules. In this investigation, we use the latest development in cryogenic atom probe tomography to study the quasi in-situ evolution of gas phase heavy water at iron-iron oxide interfaces resulting from the direct reduction of iron oxide by deuterium gas at 700°C. The findings provide new insights into the formation kinetics and location of water formed during hydrogen-based reduction of FeO, an its interaction with the ongoing redox reaction. △ Less

Submitted 16 January, 2023; originally announced January 2023.

Revisiting in-depth chemical analysis for alkali ions-exchanged glass

Authors: Se-Ho Kim, Leigh T. Stephenson, Torsten Schwarza, Baptiste Gault

Abstract: The upcoming flexible ultra-thin glass for foldable displays has attracted widespread attention as an alternative to rigid electronic smartphones. However, the detailed compositional effect of the chemical strengthening of the glass is not well understood. The spatially resolved chemistry and the depth of compression layer of tempered glass is far from being clear. In this study, commonly-used X-r… ▽ More The upcoming flexible ultra-thin glass for foldable displays has attracted widespread attention as an alternative to rigid electronic smartphones. However, the detailed compositional effect of the chemical strengthening of the glass is not well understood. The spatially resolved chemistry and the depth of compression layer of tempered glass is far from being clear. In this study, commonly-used X-ray spectroscopy techniques and atom probe tomography (APT) were used comparatively to investigate the distribution of constituent elements in two representative smartphone glass samples: non-tempered and chemically-tempered glasses. Using APT, analysing the alkalis (Li, Na, K, Ca) that could impact the failure of the tempered glass was feasible at sub-nanoscale resolution; demonstrating that APT can be regarded as an alternative technique for imaging chemical distribution in glass for mobile applications. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Atom probe analysis of battery materials: challenges and ways forward

Authors: Se-Ho Kim, Stoichko Antonov, Xuyang Zhou, Leigh T. Stephenson, Chanwon Jung, Ayman A. El-Zoka, Daniel K. Schreiber, Michele Conroy, Baptiste Gault

Abstract: The worldwide developments of electric vehicles, as well as large-scale or grid-scale energy storage to compensate the intermittent nature of renewable energy generation has generated a surge of interest in battery technology. Understanding the factors controlling battery capacity and, critically, their degradation mechanisms to ensure long-term, sustainable and safe operation requires detailed kn… ▽ More The worldwide developments of electric vehicles, as well as large-scale or grid-scale energy storage to compensate the intermittent nature of renewable energy generation has generated a surge of interest in battery technology. Understanding the factors controlling battery capacity and, critically, their degradation mechanisms to ensure long-term, sustainable and safe operation requires detailed knowledge of their microstructure and chemistry, and their evolution under operating conditions, on the nanoscale. Atom probe tomography (APT) provides compositional map** of materials in three-dimensions with sub-nanometre resolution, and is poised to play a key role in battery research. However, APT is underpinned by an intense electric-field that can drive lithium migration, and many battery materials are reactive oxides, requiring careful handling and sample transfer. Here, we report on the analysis of both anode and cathode materials, and show that electric-field driven migration can be suppressed by using shielding by embedding powder particles in a metallic matrix or by using a thin conducting surface layer. We demonstrate that for a typical cathode material, cryogenic specimen preparation and transport under ultra-high vacuum leads to major delithiation of the specimen during the analysis. In contrast, transport of specimens through air enables analysis of the material. Finally, we discuss the possible physical underpinnings and discuss ways forward to enable shield of the electric field, which helps address the challenges inherent to the APT analysis of battery materials. △ Less

Submitted 20 January, 2022; v1 submitted 7 October, 2021; originally announced October 2021.

Hydrogen and deuterium charging of site-specific specimen for atom probe tomography

Authors: Heena Khanchandani, Se-Ho Kim, Rama Srinivas Varanasi, TS Prithiv, Leigh T. Stephenson, Baptiste Gault

Abstract: Hydrogen embrittlement can cause a dramatic deterioration of the mechanical properties of high-strength metallic materials. Despite decades of experimental and modelling studies, the exact underlying mechanisms behind hydrogen embrittlement remain elusive. To unlock understanding of the mechanism and thereby help mitigate the influence of hydrogen and the associated embrittlement, it is essential… ▽ More Hydrogen embrittlement can cause a dramatic deterioration of the mechanical properties of high-strength metallic materials. Despite decades of experimental and modelling studies, the exact underlying mechanisms behind hydrogen embrittlement remain elusive. To unlock understanding of the mechanism and thereby help mitigate the influence of hydrogen and the associated embrittlement, it is essential to examine the interactions of hydrogen with structural defects such as grain boundaries, dislocations and stacking faults. Atom probe tomography (APT) can, in principle, analyse hydrogen located specifically at such microstructural features but faces strong challenges when it comes to charging specimens with hydrogen or deuterium. Here, we describe three different workflows enabling hydrogen/deuterium charging of site-specific APT specimens: namely cathodic, plasma and gas charging. We discuss in detail the caveats of the different approaches in order to help with future research efforts and facilitate further studies of hydrogen in metals. Our study demonstrates successful cathodic and gas charging, with the latter being more promising for the analysis of the high-strength steels at the core of our work. △ Less

Submitted 28 September, 2021; originally announced September 2021.

Laser-equipped gas reaction chamber for probing environmentally sensitive materials at near atomic scale

Authors: Heena Khanchandani, Ayman A. El-Zoka, Se-Ho Kim, Uwe Tezins, Dirk Vogel, Andreas Sturm, Dierk Raabe, Baptiste Gault, Leigh Stephenson

Abstract: Numerous metallurgical and materials science applications depend on quantitative atomic-scale characterizations of environmentally-sensitive materials and their transient states. Studying the effect upon materials subjected to thermochemical treatments in specific gaseous atmospheres is of central importance for specifically studying a material's resistance to certain oxidative or hydrogen environ… ▽ More Numerous metallurgical and materials science applications depend on quantitative atomic-scale characterizations of environmentally-sensitive materials and their transient states. Studying the effect upon materials subjected to thermochemical treatments in specific gaseous atmospheres is of central importance for specifically studying a material's resistance to certain oxidative or hydrogen environments. It is also important for investigating catalytic materials, direct reduction of an oxide, particular surface science reactions or nanoparticle fabrication routes. This manuscript realizes such experiments upon a thermochemical reaction chamber called the Reacthub and allows for transferring treated materials under cryogenic & ultrahigh vacuum workflow conditions for characterisation by either atom probe or scanning Xe+/electron microscopies. Two examples are discussed in the present study. One protocol was in the deuterium gas charging (25 kPa D2 at 200 °C) of a high-manganese twinning-induced-plasticity steel and characterization of the ingress and trap** of hydrogen at various features (grain boundaries in particular) in efforts to relate this to the steel's hydrogen embrittlement susceptibility. Deuterium was successfully detected after gas charging but most contrast originated from the complex ion FeOD+ signal and the feature may be an artefact. The second example considered the direct deuterium reduction (5 kPa D2 at 700 °C) of a single crystal wuestite sample, demonstrating that under a standard thermochemical treatment causes rapid reduction upon the nanoscale. Further studies are required for complete confidence about these phenomena, but these experiments successfully demonstrate that how an ex-situ thermochemical treatment can be realised that captures environmentally-sensitive transient states that can be analysed by atomic-scale by atom probe microscope. △ Less

Submitted 21 October, 2021; v1 submitted 26 July, 2021; originally announced July 2021.

Understanding alkali contamination in colloidal nanomaterials to unlock grain boundary impurity engineering

Authors: Se-Ho Kim, Su-Hyun Yoo, Poulami Chakraborty, Jiwon Jeong, Joohyun Lim, Ayman A. El-Zoka, Xuyang Zhou, Leigh T. Stephenson, Tilmann Hickel, Jörg Neugebauer, Christina Scheu, Mira Todorova, Baptiste Gault

Abstract: Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesi… ▽ More Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesized Pd nano-aerogels from a K2PdCl4 precursor and two different NaBH4 reductant concentrations in distilled water. Atom probe tomography reveals that the aerogel is poly-crystalline and that impurities (Na, K) are integrated from the solution into grain boundaries. Ab initio calculations indicate that these impurities preferentially bound to the Pd-metal surface and are ultimately found in grain boundaries forming as the particles coalesce during synthesis, with Na atoms thermodynamically equilibrating with the surrounding solution and K atoms remaining between growing grains. If controlled, impurity integration, i.e. grain boundary decoration, may offer opportunities for designing new nano-aerogels. △ Less

Submitted 4 November, 2021; v1 submitted 11 June, 2021; originally announced June 2021.

Phase Separation and Anomalous Volume Expansion in Frozen Microscale Eutectic Indium-Gallium upon Remelting

Authors: Se-Ho Kim, Leigh T. Stephenson, Alisson K. da Silva, Baptiste Gault, Ayman A. El-Zoka

Abstract: The eutectic Ga-In (EGaIn) alloy has low vapor pressure, low toxicity, high thermal and electrical conductivities, and thus has shown a great potential for smart material applications. For such applications, EGaIn is maintained above its melting point, below which it undergoes solidification and phase separation. A scientific understanding of the structural and compositional evolution during therm… ▽ More The eutectic Ga-In (EGaIn) alloy has low vapor pressure, low toxicity, high thermal and electrical conductivities, and thus has shown a great potential for smart material applications. For such applications, EGaIn is maintained above its melting point, below which it undergoes solidification and phase separation. A scientific understanding of the structural and compositional evolution during thermal cycling could help further assess the application range of low-melting-point fusible alloys. Here, we use an integrated suite of cryogenically-enabled advanced microscopy & microanalysis to better understand phase separation and (re)mixing processes in EGaIn. We reveal an overlooked thermal-stimulus-response behaviour for frozen mesoscale EGaIn at cryogenic temperatures, with a sudden volume expansion observed during in-situ heat-cycling, associated with the immiscibility between Ga and In during cooling and the formation of metastable Ga phases. These results emphasize the importance of the kinetics of rejuvenation, and open new paths for EGaIn as a self-healing material. △ Less

Submitted 16 March, 2022; v1 submitted 26 May, 2021; originally announced May 2021.

Three-dimensional atomically-resolved analytical imaging with a field ion microscope

Authors: Shyam Katnagallu, Felipe Felipe F. Morgado, Isabelle Mouton, Baptiste Gault, Leigh T. Stephenson

Abstract: Atom probe tomography (APT) helps elucidate the link between the nanoscale chemical variations and physical properties, but it has limited structural resolution. Field ion microscopy (FIM), a predecessor technique to APT, is capable of attaining atomic resolution along certain sets of crystallographic planes albeit at the expense of elemental identification. We demonstrate how two commercially-ava… ▽ More Atom probe tomography (APT) helps elucidate the link between the nanoscale chemical variations and physical properties, but it has limited structural resolution. Field ion microscopy (FIM), a predecessor technique to APT, is capable of attaining atomic resolution along certain sets of crystallographic planes albeit at the expense of elemental identification. We demonstrate how two commercially-available atom probe instruments, one with a straight flight path and one fitted with a reflectron-lens, can be used to acquire time-of-flight mass spectrometry data concomitant with a FIM experiment. We outline various experimental protocols making use of temporal and spatial correlations to best discriminate field evaporated signals from the large field ionised background signal, demonstrating an unsophisticated yet efficient data mining strategy to provide this discrimination. We discuss the remaining experimental challenges that need be addressed, notably concerned with accurate detection and identification of individual field evaporated ions contained within the high field ionised flux that contributes to a FIM image. Our hybrid experimental approach can, in principle, exhibit true atomic resolution with elemental discrimination capabilities, neither of which atom probe nor field ion microscopy can individually fully deliver - thereby making this new approach, here broadly termed analytical field ion microscope (aFIM), unique. △ Less

Submitted 23 March, 2021; v1 submitted 19 March, 2021; originally announced March 2021.

Comments: 20 pages, 10 figures

Reflections on the spatial performance of atom probe tomography in the analysis of atomic neighbourhoods

Authors: Baptiste Gault, Benjamin Klaes, Felipe F. Morgado, Christoph Freysoldt, Yue Li, Frederic De Geuser, Leigh T. Stephenson, François Vurpillot

Abstract: Atom probe tomography is often introduced as providing "atomic-scale" map** of the composition of materials and as such is often exploited to analyse atomic neighbourhoods within a material. Yet quantifying the actual spatial performance of the technique in a general case remains challenging, as they depend on the material system being investigated as well as on the specimen's geometry. Here, by… ▽ More Atom probe tomography is often introduced as providing "atomic-scale" map** of the composition of materials and as such is often exploited to analyse atomic neighbourhoods within a material. Yet quantifying the actual spatial performance of the technique in a general case remains challenging, as they depend on the material system being investigated as well as on the specimen's geometry. Here, by using comparisons with field-ion microscopy experiments and field-ion imaging and field evaporation simulations, we provide the basis for a critical reflection on the spatial performance of atom probe tomography in the analysis of pure metals, low alloyed systems and concentrated solid solutions (i.e. akin to high-entropy alloys). The spatial resolution imposes strong limitations on the possible interpretation of measured atomic neighbourhoods, and directional neighbourhood analyses restricted to the depth are expected to be more robust. We hope this work gets the community to reflect on its practices, in the same way, it got us to reflect on our work. △ Less

Submitted 19 July, 2021; v1 submitted 2 March, 2021; originally announced March 2021.

Comments: Submitted to Microscopy & Microanalysis to be part of the special issue assocaited to the APT&M 2020 conference

Revealing atomic-scale vacancy-solute interaction in nickel

Authors: Felipe F. Morgado, Shyam Katnagallu, Christoph Freysoldt, Benjamin Klaes, François Vurpillot, Jörg Neugebauer, Dierk Raabe, Steffen Neumeier, Baptiste Gault, Leigh T. Stephenson

Abstract: Imaging individual vacancies in solids and revealing their interactions with solute atoms remains one of the frontiers in microscopy and microanalysis. Here we study a creep-deformed binary Ni-2 at.% Ta alloy. Atom probe tomography reveals a random distribution of Ta. Field ion microscopy, with contrast interpretation supported by density-functional theory and time-of-flight mass spectrometry, evi… ▽ More Imaging individual vacancies in solids and revealing their interactions with solute atoms remains one of the frontiers in microscopy and microanalysis. Here we study a creep-deformed binary Ni-2 at.% Ta alloy. Atom probe tomography reveals a random distribution of Ta. Field ion microscopy, with contrast interpretation supported by density-functional theory and time-of-flight mass spectrometry, evidences a positive correlation of tantalum with vacancies. Our results support solute-vacancy binding, which explains improvement in creep resistance of Ta-containing Ni-based superalloys and helps guide future material design strategies. △ Less

Submitted 16 June, 2021; v1 submitted 2 March, 2021; originally announced March 2021.

Comments: Submitted to Physics Review Letter

Convolutional neural network-assisted recognition of nanoscale L12 ordered structures in face-centred cubic alloys

Authors: Yue Li, Xuyang Zhou, Timoteo Colnaghi, Ye Wei, Andreas Marek, Hongxiang Li, Stefan Bauer, Markus Rampp, Leigh Stephenson

Abstract: Nanoscale L12-type ordered structures are widely used in face-centred cubic (FCC) alloys to exploit their hardening capacity and thereby improve mechanical properties. These fine-scale particles are typically fully coherent with matrix with the same atomic configuration disregarding chemical species, which makes them challenging to be characterized. Spatial distribution maps (SDMs) are used to pro… ▽ More Nanoscale L12-type ordered structures are widely used in face-centred cubic (FCC) alloys to exploit their hardening capacity and thereby improve mechanical properties. These fine-scale particles are typically fully coherent with matrix with the same atomic configuration disregarding chemical species, which makes them challenging to be characterized. Spatial distribution maps (SDMs) are used to probe local order by interrogating the three-dimensional (3D) distribution of atoms within reconstructed atom probe tomography (APT) data. However, it is almost impossible to manually analyse the complete point cloud ($>10$ million) in search for the partial crystallographic information retained within the data. Here, we proposed an intelligent L12-ordered structure recognition method based on convolutional neural networks (CNNs). The SDMs of a simulated L12-ordered structure and the FCC matrix were firstly generated. These simulated images combined with a small amount of experimental data were used to train a CNN-based L12-ordered structure recognition model. Finally, the approach was successfully applied to reveal the 3D distribution of L12-type $δ^\prime$-Al3(LiMg) nanoparticles with an average radius of 2.54 nm in a FCC Al-Li-Mg system. The minimum radius of detectable nanodomain is even down to 5 Å. The proposed CNN-APT method is promising to be extended to recognize other nanoscale ordered structures and even more-challenging short-range ordered phenomena in the near future. △ Less

Submitted 16 February, 2021; originally announced February 2021.

Comments: 41 pages, 7 figures, 5 supplementary figures

Journal ref: NPJ Computational Materials 7, 8 (2021)

Influence of microstructure and atomic-scale chemistry on iron ore reduction with hydrogen at 700°C

Authors: Se-Ho Kim, Xue Zhang, Kevin Schweinar, Isnaldi R. Souza Filho, Katja Angerendt, Yan Ma, Dirk Vogel, Leigh T. Stephenson, Ayman A. El-Zoka, Jaber Rezaei Mianroodi, Michael Rohwerder, Baptiste Gault, Dierk Raabe

Abstract: With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, cau… ▽ More With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, causing 30% of the global CO2 emissions in the manufacturing sector, which translates to 6.5% of the global CO2 emissions. These numbers qualify iron- and steel-making as the largest single industrial greenhouse gas emission source. The envisaged future industrial route to mitigate these CO2 emissions targets green hydrogen as a reductant. Although this reaction has been studied for decades, its kinetics is not well understood, particularly during the wustite reduction step which is dramatically slower than the hematite reduction. Many rate-limiting factors of this reaction are set by the micro- and nanostructure as well as the local chemistry of the ores. Their quantification allows knowledge-driven ore preparation and process optimization to make the hydrogen-based reduction of iron ores commercially viable, enabling the required massive CO2 mitigation to ease global warming. Here, we report on a multi-scale structure and composition analysis of iron reduced from hematite with pure H2, reaching down to near-atomic scale. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Atomic scale map** of impurities in partially reduced hollow TiO2 nanowires

Authors: Joohyun Lim, Se-Ho Kim, Raquel Aymerich Armengol, Olga Kasian, Pyuck-Pa Choi, Leigh T. Stephenson, Baptiste Gault, Christina Scheu

Abstract: The incorporation of impurities during the chemical synthesis of nanomaterials is usually uncontrolled and rarely reported because of the formidable challenge that constitutes measuring trace amounts of often light elements with sub nanometre spatial resolution. Yet these foreign elements influence functional properties, by e.g. do**. Here we demonstrate how the synthesis and partial reduction r… ▽ More The incorporation of impurities during the chemical synthesis of nanomaterials is usually uncontrolled and rarely reported because of the formidable challenge that constitutes measuring trace amounts of often light elements with sub nanometre spatial resolution. Yet these foreign elements influence functional properties, by e.g. do**. Here we demonstrate how the synthesis and partial reduction reaction on hollow TiO2 nanowires leads to the introduction of parts-per-millions of boron, sodium, and nitrogen from the reduction reaction with sodium borohydride at the surface of the TiO2 nanowire. This do** explains the presence of oxygen vacancies at the surface that enhance the activity. Our results obtained on model metal-oxide nanomaterials shed light on the general process leading to the uncontrolled incorporation of trace impurities that can have a dramatic effect on their potential use in energy-harvesting applications. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Direct imaging of dopant and impurity distributions in 2D MoS$_2$

Authors: Se-Ho Kim, Joohyun Lim, Rajib Sahu, Olga Kasian, Leigh T. Stephenson, Christina Scheu, Baptiste Gault

Abstract: Molybdenum disulfide (MoS$_2$) nanosheet is a two-dimensional material with high electron mobility and with high potential for applications in catalysis and electronics. We synthesized MoS$_2$ nanosheets using a one-pot wet-chemical synthesis route with and without Re-do**. Atom probe tomography revealed that 3.8 at.% Re is homogeneously distributed within the Re-doped sheets. Other impurities a… ▽ More Molybdenum disulfide (MoS$_2$) nanosheet is a two-dimensional material with high electron mobility and with high potential for applications in catalysis and electronics. We synthesized MoS$_2$ nanosheets using a one-pot wet-chemical synthesis route with and without Re-do**. Atom probe tomography revealed that 3.8 at.% Re is homogeneously distributed within the Re-doped sheets. Other impurities are found also integrated within the material: light elements including C, N, O, and Na, locally enriched up to 0.1 at.%, as well as heavy elements such as V and W. Analysis of the non-doped sample reveals that the W and V likely originate from the Mo precursor. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Magneto-electric Tuning of Pinning-Type Permanent Magnets through Atomic-Scale Engineering of Grain Boundaries

Authors: Xinglong Ye, Fengkai Yan, Lukas Schaefer, Di Wang, Holger Geßwein, Wu Wang, Mohammed Reda Chellali, Leigh T. Stephenson, Konstantin Skokov, Oliver Gutfleisch, Dierk Raabe, Horst Hahn, Baptiste Gault, Robert Kruk

Abstract: Pinning-type magnets maintaining high coercivity, i.e. the ability to sustain magnetization, at high temperature are at the core of thriving clean-energy technologies. Among these, Sm2Co17-based magnets are excellent candidates owing to their high-temperature stability. However, despite decades of efforts to optimize the intragranular microstructure, the coercivity currently only reaches 20~30% of… ▽ More Pinning-type magnets maintaining high coercivity, i.e. the ability to sustain magnetization, at high temperature are at the core of thriving clean-energy technologies. Among these, Sm2Co17-based magnets are excellent candidates owing to their high-temperature stability. However, despite decades of efforts to optimize the intragranular microstructure, the coercivity currently only reaches 20~30% of the theoretical limits. Here, the roles of the grain-interior nanostructure and the grain boundaries in controlling coercivity are disentangled by an emerging magneto-electric approach. Through hydrogen charging/discharging by applying voltages of only ~ 1 V, the coercivity is reversibly tuned by an unprecedented value of ~ 1.3 T. In situ magneto-structural measurements and atomic-scale tracking of hydrogen atoms reveal that the segregation of hydrogen atoms at the grain boundaries, rather than the change of the crystal structure, dominates the reversible and substantial change of coercivity. Hydrogen lowers the local magnetocrystalline anisotropy and facilitates the magnetization reversal starting from the grain boundaries. Our study reveals the previously neglected critical role of grain boundaries in the conventional magnetisation-switching paradigm, suggesting a critical reconsideration of strategies to overcome the coercivity limits in permanent magnets, via for instance atomic-scale grain boundary engineering. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Status and direction of atom probe analysis of frozen liquids

Authors: Patrick Stender, Baptiste Gault, Tim M. Schwarz, Eric V. Woods, Se-Ho Kim, Jonas Ott, Leigh T. Stephenson, Guido Schmitz, Christoph Freysoldt, Johannes Kästner, Ayman A. El-Zoka

Abstract: Imaging of liquids and cryogenic biological materials by electron microscopy has been recently enabled by innovative approaches for specimen preparation and the fast development of optimised instruments for cryo-enabled electron microscopy (cryo-EM). Yet, Cryo-EM typically lacks advanced analytical capabilities, in particular for light elements. With the development of protocols for frozen wet spe… ▽ More Imaging of liquids and cryogenic biological materials by electron microscopy has been recently enabled by innovative approaches for specimen preparation and the fast development of optimised instruments for cryo-enabled electron microscopy (cryo-EM). Yet, Cryo-EM typically lacks advanced analytical capabilities, in particular for light elements. With the development of protocols for frozen wet specimen preparation, atom probe tomography (APT) could advantageously complement insights gained by cryo-EM. Here, we report on different approaches that have been recently proposed to enable the analysis of relatively large volumes of frozen liquids from either a flat substrate or the fractured surface of a wire. Both allowed for analysing water ice layers which are several microns thick consisting of pure water, pure heavy-water and aqueous solutions. We discuss the merits of both approaches, and prospects for further developments in this area. Preliminary results raise numerous questions, in part concerning the physics underpinning field evaporation. We discuss these aspects and lay out some of the challenges regarding the APT analysis of frozen liquids. △ Less

Submitted 3 February, 2021; originally announced February 2021.

Comments: submitted for publication assocaited to the APT&M 2020 conference

Hydride growth mechanism in Zircaloy-4: investigation of the partitioning of alloying elements

Authors: Isabelle Mouton, Yanhong Chang, Poulami Chakraborty, Siyang Wang, Leigh T. Stephenson, T. Ben Britton, Baptiste Gault

Abstract: The long-term safety of water-based nuclear reactors relies in part on the reliability of zirconium-based nuclear fuel. Yet the progressive ingress of hydrogen during service makes zirconium alloys subject to delayed hydride cracking. Here, we use a combination of electron back-scattered diffraction and atom probe tomography to investigate specific microstructural features from the as-received sam… ▽ More The long-term safety of water-based nuclear reactors relies in part on the reliability of zirconium-based nuclear fuel. Yet the progressive ingress of hydrogen during service makes zirconium alloys subject to delayed hydride cracking. Here, we use a combination of electron back-scattered diffraction and atom probe tomography to investigate specific microstructural features from the as-received sample and in the blocky-alpha microstructure, before and after electrochemical charging with hydrogen or deuterium followed by a low temperature heat treatment at 400C for 5 hours followed by furnace cooling at a rate of 0. 5C per min. Specimens for atom probe were prepared at cryogenic temperature to avoid the formation of spurious hydrides. We report on the compositional evolution of grains and grain boundaries over the course of the sample's thermal history, as well as the ways the growth of the hydrides modifies locally the composition and the structure of the alloy. We observe a significant amount of deuterium left in the matrix, even after the slow cooling and growth of the hydrides. Stacking faults form ahead of the growth front and Sn segregates at the hydride-matrix interface and on these faults. We propose that this segregation may facilitate further growth of the hydride. Our systematic investigation enables us discuss how the solute distribution affects the evolution of the alloy's properties during its service lifetime. △ Less

Submitted 17 September, 2020; originally announced September 2020.

Solute hydrogen and deuterium observed at the near atomic scale in high-strength steel

Authors: Andrew J. Breen, Leigh T. Stephenson, Binhan Sun, Yujiao Li, Olga Kasian, Dierk Raabe, Michael Herbig, Baptiste Gault

Abstract: Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nano… ▽ More Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nanostructure of an ultra-high strength steel with high resistance to hydrogen embrittlement. Cold drawn, severely deformed pearlitic steel wires (Fe-0.98C-0.31Mn-0.20Si-0.20Cr-0.01Cu-0.006P-0.007S wt.%, ε=3.1) contains cementite decomposed during the pre-deformation of the alloy and ferrite. We find H and D within the decomposed cementite, and at some interfaces with the surrounding ferrite. To ascertain the origin of the H/D signal obtained in APT, we explored a series of experimental workflows including cryogenic specimen preparation and cryogenic-vacuum transfer from the preparation into a state-of-the-art atom probe. Our study points to the critical role of the preparation, i.e. the possible saturation of H-trap** sites during electrochemical polishing, how these can be alleviated by the use of an outgassing treatment, cryogenic preparation and transfer prior to charging. Accommodation of large amounts of H in the under-stoichiometric carbide likely explains the resistance of pearlite against hydrogen embrittlement. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Enabling near-atomic-scale analysis of frozen water

Authors: Ayman A. El-Zoka, Se-Ho Kim, Sylvain Deville, Roger C. Newman, Leigh T. Stephenson, Baptiste Gault

Abstract: Transmission electron microscopy has undergone a revolution in recent years with the possibility to perform routine cryo-imaging of biological materials and (bio)chemical systems, as well as the possibility to image liquids via dedicated reaction cells or graphene-sandwiching. These approaches however typically require imaging a large number of specimens and reconstructing an average representatio… ▽ More Transmission electron microscopy has undergone a revolution in recent years with the possibility to perform routine cryo-imaging of biological materials and (bio)chemical systems, as well as the possibility to image liquids via dedicated reaction cells or graphene-sandwiching. These approaches however typically require imaging a large number of specimens and reconstructing an average representation and often lack analytical capabilities. Here, using atom probe tomography we provide atom-by-atom analyses of frozen liquids and analytical sub-nanometre three dimensional reconstructions. The analyzed ice is in contact with, and embedded within, nanoporous gold (NPG). We report the first such data on 2-3 microns thick layers of ice formed from both high purity deuterated water and a solution of 50mM NaCl in high purity deuterated water. We present a specimen preparation strategy that uses a NPG film and, additionally, we report on an analysis of the interface between nanoporous gold and frozen salt water solution with an apparent trend in the Na and Cl concentrations across the interface. We explore a range of experimental parameters to show that the atom probe analyses of bulk aqueous specimens come with their own special challenges and discuss physical processes that may produce the observed phenomena. Our study demonstrates the viability of using frozen water as a carrier for near-atomic scale analysis of objects in solution by atom probe tomography. △ Less

Submitted 29 June, 2020; originally announced June 2020.

Imaging individual solute atoms at crystalline imperfections in metals

Authors: Shyam Katnagallu, Leigh T. Stephenson, Isabelle Mouton, Christoph Freysoldt, Aparna P. A. Subramanyam, Jan Jenke, Alvin N. Ladines, Steffen Neumeier, Thomas Hammerschmidt, Ralf Drautz, Jörg Neugebauer, François Vurpillot, Dierk Raabe, Baptiste Gault

Abstract: Directly imaging all atoms constituting a material and, maybe more importantly, crystalline defects that dictate materials' properties, remains a formidable challenge. Here, we propose a new approach to chemistry-sensitive field-ion microscopy (FIM) combining contrast interpretation from density-functional theory (DFT) and elemental identification enabled by time-of-flight mass-spectrometry and da… ▽ More Directly imaging all atoms constituting a material and, maybe more importantly, crystalline defects that dictate materials' properties, remains a formidable challenge. Here, we propose a new approach to chemistry-sensitive field-ion microscopy (FIM) combining contrast interpretation from density-functional theory (DFT) and elemental identification enabled by time-of-flight mass-spectrometry and data mining. Analytical-FIM has true atomic resolution and we demonstrate how the technique can reveal the presence of individual solute atoms at specific positions in the microstructure. The performance of this new technique is showcased in revealing individual Re atoms at crystalline defects formed in Ni during creep deformation. The atomistic details offered by A-FIM allowed us to directly compare our results with simulations, and to tackle a long-standing question of how Re extends lifetime of Ni-based superalloys in service at high-temperature. △ Less

Submitted 31 March, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

Atomic-scale investigation of hydrogen distribution in a Ti-Mo alloy

Authors: Fengkai Yan, Isabelle Mouton, Leigh T. Stephenson, Andrew J. Breen, Yanhong Chang, Dirk Ponge, Dierk Raabe, Baptiste Gault

Abstract: Ingress of hydrogen is often linked to catastrophic failure of Ti-alloys. Here, we quantify the hydrogen distribution in fully \b{eta} and α+\b{eta} Ti-Mo alloys by using atom probe tomography. Hydrogen does not segregate at grain boundaries in the fully \b{eta} sample but segregates at some α/\b{eta} phase boundaries with a composition exceeding 20 at.% in the α+\b{eta} sample. No stable hydrides… ▽ More Ingress of hydrogen is often linked to catastrophic failure of Ti-alloys. Here, we quantify the hydrogen distribution in fully \b{eta} and α+\b{eta} Ti-Mo alloys by using atom probe tomography. Hydrogen does not segregate at grain boundaries in the fully \b{eta} sample but segregates at some α/\b{eta} phase boundaries with a composition exceeding 20 at.% in the α+\b{eta} sample. No stable hydrides were observed in either sample. The hydrogen concentration in \b{eta} phases linearly decreases from ~13 at. % to ~4 at. % with increasing Mo-content, which is ascribed to the suppression of hydrogen uptake by Mo addition. △ Less

Submitted 3 December, 2018; originally announced December 2018.

Quantification challenges for atom probe tomography of hydrogen and deuterium in Zircaloy-4

Authors: Isabelle Mouton, Andrew J. Breen, Siyang Wang, Yanhong Chang, Agnieszka Szczepaniak, Paraskevas Kontis, Leigh T. Stephenson, Dierk Raabe, M. Herbig, T. Ben Britton, Baptiste Gault

Abstract: Analysis and understanding of the role of hydrogen in metals is a significant challenge for the future of materials science, and this is a clear objective of recent work in the atom probe tomography (APT) community. Isotopic marking by deuteration has often been proposed as the preferred route to enable quantification of hydrogen by APT. Zircaloy-4 was charged electrochemically with hydrogen and d… ▽ More Analysis and understanding of the role of hydrogen in metals is a significant challenge for the future of materials science, and this is a clear objective of recent work in the atom probe tomography (APT) community. Isotopic marking by deuteration has often been proposed as the preferred route to enable quantification of hydrogen by APT. Zircaloy-4 was charged electrochemically with hydrogen and deuterium under the same conditions to form large hydrides and deuterides. Our results from a Zr hydride and a Zr deuteride highlight challenges associated to accurate quantification of hydrogen and deuterium, in particular associated to the overlap of peaks at low mass-to-charge ratio and of hydrogen/deuterium containing molecular ions. We discuss possible ways to ensure that appropriate information is extracted from APT analysis of hydrogen in a zirconium alloy systems that is important for nuclear power. △ Less

Submitted 3 February, 2019; v1 submitted 10 September, 2018; originally announced September 2018.

Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4

Authors: A. J. Breen, I. Mouton, W. Lu, S. Wang, A. Szczepaniak, P. Kontis, L. T. Stephenson, Y. Chang, A. K. da Silva, C. Liebscher, D. Raabe, T. B. Britton, M. Herbig, B. Gault

Abstract: Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt. %) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δdeuteride (ZrD1.5-1.65), a HC… ▽ More Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt. %) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δdeuteride (ZrD1.5-1.65), a HCP ζphase deuteride (ZrD0.25-0.5) has been observed. Furthermore, Sn is rejected from the deuterides and segregates to the deuteride/α-Zr reaction front. △ Less

Submitted 28 June, 2018; v1 submitted 26 June, 2018; originally announced June 2018.

The Laplace project: an integrated suite for correlative atom probe tomography and electron microscopy under cryogenic and UHV conditions

Authors: Leigh T. Stephenson, Agnieszka Szczepaniak, Isabelle Mouton, Kristiane Ann Kathrin Rusitzka, Andrew J. Breen, Uwe Tezins, Andreas Sturm, Dirk Vogel, Yanhong Chang, Paraskevas Kontis, Alexander Rosenthal, Jeffrey D. Shepard, Urs Maier, Thomas F. Kelly, Dierk Raabe, Baptiste Gault

Abstract: We present sample transfer instrumentation and integrated protocols for the preparation and correlative characterization of environmentally-sensitive materials by both atom probe tomography and electron microscopy. Ultra-high vacuum cryogenic suitcases allow specimen transfer between preparation, processing and several imaging platforms without exposure to atmospheric contamination. For expedient… ▽ More We present sample transfer instrumentation and integrated protocols for the preparation and correlative characterization of environmentally-sensitive materials by both atom probe tomography and electron microscopy. Ultra-high vacuum cryogenic suitcases allow specimen transfer between preparation, processing and several imaging platforms without exposure to atmospheric contamination. For expedient transfers, we installed a fast-docking station equipped with a cryogenic pump upon three systems; two atom probes, a scanning electron microscope / Xe-plasma focused ion beam and a N$_2$-atmosphere glovebox. We also installed a plasma FIB with a solid-state cooling stage to reduce beam damage and contamination, through reducing chemical activity and with the cryogenic components as passive cryogenic traps. We demonstrate the efficacy of the new laboratory protocols by the successful preparation and transfer of two highly contamination- and temperature-sensitive samples - water and ice. Analysing pure magnesium atom probe data, we show that surface oxidation can be effectively suppressed using an entirely cryogenic protocol (during specimen preparation and during transfer). Starting with the cryogenically-cooled plasma FIB, we also prepared and transferred frozen ice samples while avoiding significant melting or sublimation, suggesting that we may be able to measure the nanostructure of other normally-liquid or soft materials. Isolated cryogenic protocols within the N$_2$ glove box demonstrate the absence of ice condensation suggesting that environmental control can commence from fabrication until atom probe analysis. △ Less

Submitted 28 May, 2018; originally announced May 2018.

Comments: 13 pages, 5 figures, to be submitted to PLOS ONE

Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale

Authors: Yanhong Chang, Andrew J. Breen, Zahra Tarzimoghadam, Philipp Kürnsteiner, Hazel Gardner, Abigail Ackerman, Anna Radecka, Paul A. J. Bagot, Wenjun Lu, Tong Li, Eric A. Jägle, Michael Herbig, Leigh T. Stephenson, Michael P. Moody, David Rugg, David Dye, Dirk Ponge, Dierk Raabe, Baptiste Gault

Abstract: Ti has a high affinity for hydrogen and is a typical hydride formers. Ti-hydride are brittle phases which probably cause premature failure of Ti-alloys. Here, we used atom probe tomography and electron microscopy to investigate the hydrogen distribution in a set of specimens of commercially pure Ti, model and commercial Ti-alloys. Although likely partly introduced during specimen preparation with… ▽ More Ti has a high affinity for hydrogen and is a typical hydride formers. Ti-hydride are brittle phases which probably cause premature failure of Ti-alloys. Here, we used atom probe tomography and electron microscopy to investigate the hydrogen distribution in a set of specimens of commercially pure Ti, model and commercial Ti-alloys. Although likely partly introduced during specimen preparation with the focused-ion beam, we show formation of Ti-hydrides along α grain boundaries and α/\b{eta} phase boundaries in commercial pure Ti and α+\b{eta} binary model alloys. No hydrides are observed in the α phase in alloys with Al addition or quenched-in Mo supersaturation. △ Less

Submitted 11 March, 2018; originally announced March 2018.

Comments: Published in Acta Materialia in 2018

Spatial resolution in atom probe tomography

Authors: Baptiste Gault, Michael P. Moody, Frederic de Geuser, Alex La Fontaine, Leigh T. Stephenson, Daniel Haley, Simon P. Ringer

Abstract: This article addresses gaps in definitions and a lack of standard measurement techniques to assess the spatial resolution in atom probe tomography. This resolution is known to be anisotropic, being better in the depth than laterally. Generally the presence of atomic planes in the tomographic reconstruction is considered as being a sufficient proof of the quality of the spatial resolution of the in… ▽ More This article addresses gaps in definitions and a lack of standard measurement techniques to assess the spatial resolution in atom probe tomography. This resolution is known to be anisotropic, being better in the depth than laterally. Generally the presence of atomic planes in the tomographic reconstruction is considered as being a sufficient proof of the quality of the spatial resolution of the instrument. Based on advanced spatial distribution maps, an analysis methodology that interrogates the local neighborhood of the atoms within the tomographic reconstruction, it is shown how both the in-depth and the lateral resolution can be quantified. The influences of the crystallography and the temperature are investigated, and models are proposed to explain the observed results. We demonstrate that the absolute value of resolution is specimenspecific. △ Less

Submitted 10 October, 2015; originally announced October 2015.

Journal ref: Microscopy & Microanalysis 16, 99 110 2010

Estimation of the reconstruction parameters for Atom Probe Tomography

Authors: Baptiste Gault, Frederic De Geuser, Leigh T. Stephenson, Michael P. Moody, Barry C. Muddle, Simon P. Ringer

Abstract: The application of wide field-of-view detection systems to atom probe experiments emphasizes the importance of careful parameter selection in the tomographic reconstruction of the analysed volume, as the sensitivity to errors rises steeply with increases in analysis dimensions. In this paper, a self-consistent method is presented for the systematic determination of the main reconstruction paramete… ▽ More The application of wide field-of-view detection systems to atom probe experiments emphasizes the importance of careful parameter selection in the tomographic reconstruction of the analysed volume, as the sensitivity to errors rises steeply with increases in analysis dimensions. In this paper, a self-consistent method is presented for the systematic determination of the main reconstruction parameters. In the proposed approach, the compression factor and the field factor are determined using geometrical projections from the desorption images. A 3D Fourier transform is then applied to a series of reconstructions and, comparing to the known material crystallography, the efficiency of the detector is estimated. The final results demonstrate a significant improvement in the accuracy of the reconstructed volumes. △ Less

Submitted 10 October, 2015; originally announced October 2015.

Journal ref: Microscopy and Microanalysis Volume 14 Issue 04 2008 Pages 296 305

Dynamic reconstruction for atom probe tomography

Authors: Baptiste Gault, Shyeh T**g Loi, Vicente J. Araullo-Peters, Leigh T. Stephenson, Michael P. Moody, Sachin L. Shrestha, Ross K. W. Marceau, Lan Yao, Julie M. Cairney, Simon P. Ringer

Abstract: Progress in the reconstruction for atom probe tomography has been limited since the first implementation of the protocol proposed by Bas et al. in 1995. This approach, and those subsequently developed, assume that the geometric parameters used to build the three-dimensional atom map are constant over the course of an analysis. Here, we test this assumption within the analyses of low-alloyed materi… ▽ More Progress in the reconstruction for atom probe tomography has been limited since the first implementation of the protocol proposed by Bas et al. in 1995. This approach, and those subsequently developed, assume that the geometric parameters used to build the three-dimensional atom map are constant over the course of an analysis. Here, we test this assumption within the analyses of low-alloyed materials. By building upon methods recently proposed to measure the tomographic reconstruction parameters, we demonstrate that this assumption can introduce significant limitations in the accuracy of the analysis. Moreover, we propose a strategy to alleviate this problem through the implementation of a new reconstruction algorithm that dynamically accommodates variations in the tomographic reconstruction parameters. △ Less

Submitted 9 October, 2015; originally announced October 2015.

Comments: 16 pages, 6 figures

Journal ref: Ultramicroscopy Volume 111 Issue 11 November 2011 Pages 1619 1624