-
Interfacially enhanced superconductivity in Fe(Te,Se)/Bi4Te3 heterostructures
Authors:
An-Hsi Chen,
Qiangsheng Lu,
Eitan Hershkovitz,
Miguel L. Crespillo,
Alessandro R. Mazza,
Tyler Smith,
T. Zac Ward,
Gyula Eres,
Shornam Gandhi,
Meer Muhtasim Mahfuz,
Vitalii Starchenko,
Khalid Hattar,
Joon Sue Lee,
Honggyu Kim,
Robert G. Moore,
Matthew Brahlek
Abstract:
Realizing topological superconductivity by integrating high-transition-temperature ($T_C$) superconductors with topological insulators can open new paths for quantum computing applications. Here, we report a new approach for increasing the superconducting transition temperature ($T_{C}^{onset}$) by interfacing the unconventional superconductor Fe(Te,Se) with the topological insulator Bi-Te system…
▽ More
Realizing topological superconductivity by integrating high-transition-temperature ($T_C$) superconductors with topological insulators can open new paths for quantum computing applications. Here, we report a new approach for increasing the superconducting transition temperature ($T_{C}^{onset}$) by interfacing the unconventional superconductor Fe(Te,Se) with the topological insulator Bi-Te system in the low-Se do** regime, near where superconductivity vanishes in the bulk. The critical finding is that the $T_{C}^{onset}$ of Fe(Te,Se) increases from nominally non-superconducting to as high as 12.5 K when $Bi_2Te_3$ is replaced with the topological phase $Bi_4Te_3$. Interfacing Fe(Te,Se) with $Bi_4Te_3$ is also found to be critical for stabilizing superconductivity in monolayer films where $T_{C}^{onset}$ can be as high as 6 K. Measurements of the electronic and crystalline structure of the $Bi_4Te_3$ layer reveal that a large electron transfer, epitaxial strain, and novel chemical reduction processes are critical factors for the enhancement of superconductivity. This novel route for enhancing $T_C$ in an important epitaxial system provides new insight on the nature of interfacial superconductivity and a platform to identify and utilize new electronic phases.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
Harnessing metastability for grain size control in multiprincipal element alloys during additive manufacturing
Authors:
Akane Wakai,
Jenniffer Bustillos,
Noah Sargent,
Jamesa Stokes,
Wei Xiong,
Timothy M. Smith,
Atieh Moridi
Abstract:
Controlling microstructure in fusion-based metal additive manufacturing (AM) remains a challenge due to numerous parameters directly impacting solidification conditions. Multiprincipal element alloys (MPEAs) offer a vast compositional design space for microstructural engineering due to their chemical complexity and exceptional properties. Here, we establish a novel alloy design paradigm in MPEAs f…
▽ More
Controlling microstructure in fusion-based metal additive manufacturing (AM) remains a challenge due to numerous parameters directly impacting solidification conditions. Multiprincipal element alloys (MPEAs) offer a vast compositional design space for microstructural engineering due to their chemical complexity and exceptional properties. Here, we establish a novel alloy design paradigm in MPEAs for AM using the FeMnCoCr system. By exploiting the decreasing phase stability with increasing Mn content, we achieve notable grain refinement and breakdown of columnar grain growth. We combine thermodynamic modeling, operando synchrotron X-ray diffraction, multiscale microstructural characterization, and mechanical testing to gain insight into the solidification physics and its ramifications on the resulting microstructure. This work paves way for tailoring grain sizes through targeted manipulation of phase stability, thereby advancing microstructure control in AM.
△ Less
Submitted 6 May, 2024;
originally announced May 2024.
-
Stiffer alginate gels deposit more efficiently in microchannel flows
Authors:
Barrett T Smith,
Sara M Hashmi
Abstract:
The behavior of crosslinking polymer solutions as they transition from liquid-like to solid-like material in flow determines success or failure in several applications, from 3D printing to oil recovery in the earth's subsurface to a wide variety of biological flows. Dilute polymer solutions flow easily, while concentrated polymers or crosslinked polymer gels can clog pores, nozzles, or channels. W…
▽ More
The behavior of crosslinking polymer solutions as they transition from liquid-like to solid-like material in flow determines success or failure in several applications, from 3D printing to oil recovery in the earth's subsurface to a wide variety of biological flows. Dilute polymer solutions flow easily, while concentrated polymers or crosslinked polymer gels can clog pores, nozzles, or channels. We have recently uncovered and described a third regime of flow dynamics in polymers that occurs when crosslinking happens during flow: intermittent flows. In a model system of alginate and calcium meeting at a Y-shaped junction in a microfluidic channel, a persistent and regular pattern of intermittent flow occurs when driven at a constant volume flow rate. At the junction, calcium crosslinks alginate to form an alginate gel, which subsequently deposits on the channel wall. As gel continues to deposit, it obstructs the channel, causing the driving pressure to increase to maintain a constant flow rate. At a critical pressure, corresponding to a critical shear stress, the fluid pulls the gel from the wall, removing the gel from the device and resulting in a clear channel. The gel deposit begins again, and the process then repeats as long as flow continues. Chemical concentrations and flow rate control both the frequency of ablation and the critical shear stress. In this work, we provide an analytical framework to quantitatively describe the intermittent behavior as a result of diffusively driven deposition in a high Peclet number flow where convection dominates. Fitting the experimental data to the model allows estimation of the deposition efficiency, or the fraction of flowing material that sticks to the channel walls. By correlating the results of the model with bulk rheology measurements, we find that deposition efficiency increases with the stiffness of the gel formed in flow.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
Silicon Implantation and Annealing in $β$-Ga$_2$O$_3$: Role of Ambient, Temperature, and Time
Authors:
K. R. Gann,
N. Pieczulewski1,
C. A. Gorsak,
K. Heinselman,
T. J. Asel,
B. A. Noesges,
K. T. Smith,
D. M. Dryden,
H. G. Xing,
H. P. Nair,
D. A. Muller,
M. O. Thompson
Abstract:
Optimizing thermal anneals of Si-implanted $β$-Ga$_2$O$_3$ is critical for low resistance contacts and selective area do**. We report the impact of annealing ambient, temperature, and time on activation of room temperature ion-implanted Si in $β$-Ga$_2$O$_3$ at concentrations from 5x10$^{18}$ to 1x10$^{20}$ cm$^{-3}$, demonstrating full activation (>80% activation, mobilities >70 cm$^{2}$/Vs) wi…
▽ More
Optimizing thermal anneals of Si-implanted $β$-Ga$_2$O$_3$ is critical for low resistance contacts and selective area do**. We report the impact of annealing ambient, temperature, and time on activation of room temperature ion-implanted Si in $β$-Ga$_2$O$_3$ at concentrations from 5x10$^{18}$ to 1x10$^{20}$ cm$^{-3}$, demonstrating full activation (>80% activation, mobilities >70 cm$^{2}$/Vs) with contact resistances below 0.29 $Ω$-mm. Homoepitaxial $β$-Ga$_2$O$_3$ films, grown by plasma assisted MBE on Fe-doped (010) substrates, were implanted at multiple energies to yield 100 nm box profiles of 5x10$^{18}$, 5x10$^{19}$, and 1x10$^{20}$ cm$^{-3}$. Anneals were performed in a UHV-compatible quartz furnace at 1 bar with well-controlled gas composition. To maintain $β$-Ga$_2$O$_3$ stability, $p_{O2}$ must be greater than 10$^{-9}$ bar. Anneals up to $p_{O2}$ = 1 bar achieve full activation at 5x10$^{18}$ cm$^{-3}$, while 5x10$^{19}$ cm$^{-3}$ must be annealed with $p_{O2}$ <10$^{-4}$ bar and 1x10$^{20}$ cm$^{-3}$ requires $p_{O2}$ <10$^{-6}$ bar. Water vapor prevents activation and must be maintained below 10$^{-8}$ bar. Activation is achieved for anneal temperatures as low as 850 °C with mobility increasing with anneal temperature up to 1050 °C, though Si diffusion has been reported above 950 °C. At 950 °C, activation is maximized between 5 and 20 minutes with longer times resulting in decreased carrier activation (over-annealing). This over-annealing is significant for concentrations above 5x10$^{19}$ cm$^{-3}$ and occurs rapidly at 1x10$^{20}$ cm$^{-3}$. RBS (channeling) suggests damage recovery is seeded from remnant aligned $β$-Ga$_2$O$_3$ that remains after implantation; this conclusion is also supported by STEM showing retention of the $β$-phase with inclusions that resemble the $γ$-phase.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Limits of dispersoid size and number density in oxide dispersion strengthened alloys fabricated with powder bed fusion-laser beam
Authors:
Nathan A. Wassermann,
Yongchang Li,
Alexander J. Myers,
Christopher A. Kantzos,
Timothy M. Smith,
Jack L. Beuth,
Jonathan A. Malen,
Lin Shao,
Alan J. H. McGaughey,
Sneha P. Narra
Abstract:
Previous work on additively-manufactured oxide dispersion strengthened alloys focused on experimental approaches, resulting in larger dispersoid sizes and lower number densities than can be achieved with conventional powder metallurgy. To improve the as-fabricated microstructure, this work integrates experiments with a thermodynamic and kinetic modeling framework to probe the limits of the dispers…
▽ More
Previous work on additively-manufactured oxide dispersion strengthened alloys focused on experimental approaches, resulting in larger dispersoid sizes and lower number densities than can be achieved with conventional powder metallurgy. To improve the as-fabricated microstructure, this work integrates experiments with a thermodynamic and kinetic modeling framework to probe the limits of the dispersoid sizes and number densities that can be achieved with powder bed fusion-laser beam. Bulk samples of a Ni-20Cr $+$ 1 wt.% Y$_2$O$_3$ alloy are fabricated using a range of laser power and scanning velocity combinations. Scanning transmission electron microscopy characterization is performed to quantify the dispersoid size distributions across the processing space. The smallest mean dispersoid diameter (29 nm) is observed at 300 W and 1200 mm/s, with a number density of 1.0$\times$10$^{20}$ m$^{-3}$. The largest mean diameter (72 nm) is observed at 200 W and 200 mm/s, with a number density of 1.5$\times$10$^{19}$ m$^{-3}$. Scanning electron microscopy suggests that a considerable fraction of the oxide added to the feedstock is lost during processing, due to oxide agglomeration and the ejection of oxide-rich spatter from the melt pool. After accounting for these losses, the model predictions for the dispersoid diameter and number density align with the experimental trends. The results suggest that the mechanism that limits the final number density is collision coarsening of dispersoids in the melt pool. The modeling framework is leveraged to propose processing strategies to limit dispersoid size and increase number density.
△ Less
Submitted 16 January, 2024; v1 submitted 18 October, 2023;
originally announced October 2023.
-
arXiv:2304.06869
[pdf]
cond-mat.mtrl-sci
cond-mat.other
physics.app-ph
physics.chem-ph
physics.comp-ph
Energy-composition relations in Ni$_3$(Al$_{1-x}$X$_x$) phases
Authors:
Nikolai A. Zarkevich,
Timothy M. Smith,
John W. Lawson
Abstract:
The secondary phase, such as Ni$_3$Al-based $L1_2$ $γ^\prime$, is crucially important for precipitation strengthening of superalloys. Composition-structure-property relations provide useful insights for guided alloy design. Here we use density functional theory combined with the multiple scattering theory to compute dependencies of the structural energies and equilibrium volumes versus composition…
▽ More
The secondary phase, such as Ni$_3$Al-based $L1_2$ $γ^\prime$, is crucially important for precipitation strengthening of superalloys. Composition-structure-property relations provide useful insights for guided alloy design. Here we use density functional theory combined with the multiple scattering theory to compute dependencies of the structural energies and equilibrium volumes versus composition for ternary Ni$_3$(Al$_{1-x}$X$_x$) alloys with X=(Ti, Zr, Hf; V, Nb, Ta; Cr, Mo, W) in $L1_2$, $D0_{24}$, and $D0_{19}$ phases with a homogeneous chemical disorder on the (Al$_{1-x}$X$_x$) sublattice. Our results provide a better understanding of the physics in Ni$_3$Al-based precipitates and facilitate design of next-generation nickel superalloys with precipitation strengthening.
△ Less
Submitted 2 June, 2023; v1 submitted 13 April, 2023;
originally announced April 2023.
-
Energy landscape in NiCoCr-based middle-entropy alloys
Authors:
Nikolai A. Zarkevich,
Timothy M. Smith,
John W. Lawson
Abstract:
NiCoCr middle-entropy alloy is known for its exceptional strength at both low and elevated operating temperatures. Mechanical properties of NiCoCr-based alloys are affected by certain features of the energy landscape, such as the energy difference between the hcp and fcc phases (which is known to correlate with the stacking fault energy in the fcc phase) and curvature of the energy surface. We com…
▽ More
NiCoCr middle-entropy alloy is known for its exceptional strength at both low and elevated operating temperatures. Mechanical properties of NiCoCr-based alloys are affected by certain features of the energy landscape, such as the energy difference between the hcp and fcc phases (which is known to correlate with the stacking fault energy in the fcc phase) and curvature of the energy surface. We compute formation energies in the Ni-Co-Cr ternary and related quaternary systems and investigate dependences of the relative energies on composition. Such computed composition-structure-property relations can be useful for tuning composition and designing next-generation alloys with improved strength.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Mn(Pt$_{1-x}$Pd$_{x}$)$_5$P: Isovalent Tuning of Mn Sublattice Magnetic Order
Authors:
Tyler J. Slade,
Ranuri S. Dissanayaka Mudiyanselage,
Nao Furukawa,
Tanner R. Smith,
Juan Schmidt,
Lin-Lin Wang,
Chang-Jong Kang,
Kaya Wei,
Zhixue Shu,
Tai Kong,
Ryan Baumbach,
Gabriel Kotliar,
Sergey L. Budko,
Weiwei Xie,
Paul C. Canfield
Abstract:
We report the growth and characterization of MnPd$_5$P, a ferromagnet with T$_C$ $\approx$ 295 K, and conduct a substitutional study with its antiferromagnetic analogue MnPt$_5$P. We grow single crystals of MnPd$_5$P and Mn(Pt$_{1-x}$Pd$_x$)$_5$P by adding Mn into (Pt$_{1-x}$Pd$_{x}$)-P based melts. All compounds in the family adopt the layered anti-CeCoIn$_5$ structure with space group P4/mmm, an…
▽ More
We report the growth and characterization of MnPd$_5$P, a ferromagnet with T$_C$ $\approx$ 295 K, and conduct a substitutional study with its antiferromagnetic analogue MnPt$_5$P. We grow single crystals of MnPd$_5$P and Mn(Pt$_{1-x}$Pd$_x$)$_5$P by adding Mn into (Pt$_{1-x}$Pd$_{x}$)-P based melts. All compounds in the family adopt the layered anti-CeCoIn$_5$ structure with space group P4/mmm, and EDS and XRD results indicate that MnPt$_5$P and MnPd$_5$P form a solid solution. Based on magnetization and resistance data, we construct a T-x phase diagram for Mn(Pt$_{1-x}$Pd$_x$)$_5$P and demonstrate the antiferromagnetic order found in MnPt$_5$P is extraordinarily sensitive to Pd substitution. At low Pd fractions (x $<$ 0.010), the single antiferromagnetic transition in pure MnPt$_5$P splits into a higher temperature ferromagnetic transition followed on cooling by a lower temperature ferromagnetic to antiferromagnetic transition and then by a re-entrant antiferromagnetic to ferromagnetic transition at lower temperatures. The antiferromagnetic region makes up a bubble that persists to x $\approx$ 0.009 for T $\approx$ 150 K, with all samples x $<$ 0.009 recovering their initial ferromagnetic state with further cooling to base temperature. Over the same low x range we find a non-monotonic change in the room temperature unit cell volume, further suggesting that pure MnPt$_5$P is close to an instability. Once x $>$ 0.010, Mn(Pt$_{1-x}$Pd$_x$)$_5$P undergoes a single ferromagnetic transition. The Curie temperature increases rapidly with x, rising from T$_C$ $\approx$ 197 K at x = 0.013 to a maximum of T$_C$ $\approx$ 312 K for x $\approx$ 0.62, and then falls back to T$_C$ $\approx$ 295 K for pure MnPd$_5$P (x = 1). Given that Pt and Pd are isoelectronic, this work raises questions as to the origin of the extreme sensitivity of the magnetic ground state in MnPt$_5$P upon introducing Pd.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
High Temperature Ferromagnetism in Cr$_{1+x}$Pt$_{5-x}$P
Authors:
Tyler J. Slade,
Nao Furukawa,
Tanner R. Smith,
Juan Schmidt,
Ranuri S. Dissanayaka Mudiyanselage,
Lin-Lin Wang,
Weiwei Xie,
Sergey L. Budko,
Paul C. Canfield
Abstract:
We present the growth and basic magnetic and transport properties of Cr$_{1+x}$Pt$_{5-x}$P. We show that single crystals can readily be grown from a high-temperature solution created by adding dilute quantities of Cr to Pt-P based melts. Like other 1-5-1 compounds, Cr$_{1+x}$Pt$_{5-x}$P adopts a tetragonal P4/mmm structure composed face-sharing CrPt$_3$ like slabs that are broken up along the c-ax…
▽ More
We present the growth and basic magnetic and transport properties of Cr$_{1+x}$Pt$_{5-x}$P. We show that single crystals can readily be grown from a high-temperature solution created by adding dilute quantities of Cr to Pt-P based melts. Like other 1-5-1 compounds, Cr$_{1+x}$Pt$_{5-x}$P adopts a tetragonal P4/mmm structure composed face-sharing CrPt$_3$ like slabs that are broken up along the c-axis by sheets of P atoms. EDS and X-ray diffraction measurements both suggest Cr$_{1+x}$Pt$_{5-x}$P has mixed occupancy between Cr and Pt atoms, similar to what is found in the closely related compound CrPt$_3$, giving real compositions of Cr$_{1.5}$Pt$_{4.5}$P (x = 0.5). We report that Cr$_{1.5}$Pt$_{4.5}$P orders ferromagnetically at T$_C$ = 464.5 K with a saturated moment of $\approx$ 2.1 $μ_{\textit{B}}$/Cr at 1.8 K. Likely owing to the strong spin-orbit coupling associated with the large quantity of high Z Pt atoms, Cr$_{1.5}$Pt$_{4.5}$P has exceptionally strong planar anisotropy with estimated anisotropy fields of 345 kOe and 220 kOe at 1.8 K and 300 K respectively. The resistance of Cr$_{1.5}$Pt$_{4.5}$P has a metallic temperature dependence with relatively weak magnetoresistance. Electronic band structure calculations show that CrPt$_5$P has a large peak in the density of states near the Fermi level which is split into spin majority and minority bands in the ferromagnetic state. Furthermore, the calculations suggest substantial hybridization between Cr-3d and Pt-5d states near the Fermi level, in agreement with the experimentally measured anisotropy.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Monolayer superconductivity and tunable topological electronic structure at the Fe(Te,Se)/Bi2Te3 interface
Authors:
Robert G. Moore,
Tyler Smith,
Xiong Yao,
Yun-Yi Pai,
Michael Chilcote,
Hu Miao,
Satoshi Okamoto,
Seongshik Oh,
Matthew Brahlek
Abstract:
The interface between two-dimensional topological Dirac states and an s-wave superconductor is expected to support Majorana bound states that can be used for quantum computing applications. Realizing these novel states of matter and their applications requires control over superconductivity and spin-orbit coupling to achieve spin-momentum locked topological surface states which are simultaneously…
▽ More
The interface between two-dimensional topological Dirac states and an s-wave superconductor is expected to support Majorana bound states that can be used for quantum computing applications. Realizing these novel states of matter and their applications requires control over superconductivity and spin-orbit coupling to achieve spin-momentum locked topological surface states which are simultaneously superconducting. While signatures of Majorana bound states have been observed in the magnetic vortex cores of bulk FeTe0.55Se0.45, inhomogeneity and disorder from do** makes these signatures unclear and inconsistent between vortices. Here we report superconductivity in monolayer FeTe1-ySey (Fe(Te,Se)) grown on Bi2Te3 by molecular beam epitaxy. Spin and angle resolved photoemission spectroscopy directly resolve the interfacial spin and electronic structure of Fe(Te,Se)/Bi2Te3 heterostructures. We find that for y = 0.25 the Fe(Te,Se) electronic structure overlaps with the topological Bi2Te3 interfacial states which disrupts the desired spin-momentum locking. In contrast, for y = 0.1 a smaller Fe(Te,Se) Fermi surface allows for clear spin-momentum locking observed in the topological states. Hence, we demonstrate the Fe(Te,Se)/Bi2Te3 system is a highly tunable platform for realizing Majorana bound states where reduced do** can improve characteristics important for Majorana interrogation and potential applications.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Surface-Driven Evolution of the Anomalous Hall Effect in Magnetic Topological Insulator MnBi2Te4 Thin Films
Authors:
Alessandro R. Mazza,
Jason Lapano,
Harry M. Meyer III,
Christopher T. Nelson,
Tyler Smith,
Yun-Yi Pai,
Kyle Noordhoek,
Benjamin J. Lawrie,
Timothy R. Charlton,
Robert G. Moore,
T. Zac Ward,
Mao-Hua Du,
Gyula Eres,
Matthew Brahlek
Abstract:
Understanding the effects of interfacial modification to the functional properties of magnetic topological insulator thin films is crucial for develo** novel technological applications from spintronics to quantum computing. Here, we report that a large electronic and magnetic response is induced in the intrinsic magnetic topological insulator MnBi2Te4 by controlling the propagation of surface ox…
▽ More
Understanding the effects of interfacial modification to the functional properties of magnetic topological insulator thin films is crucial for develo** novel technological applications from spintronics to quantum computing. Here, we report that a large electronic and magnetic response is induced in the intrinsic magnetic topological insulator MnBi2Te4 by controlling the propagation of surface oxidation. We show that the formation of the surface oxide layer is confined to the top 1-2 unit cells but drives large changes in the overall magnetic response. Specifically, we observe a dramatic reversal of the sign of the anomalous Hall effect driven by finite thickness magnetism, which indicates that the film splits into distinct magnetic layers each with a unique electronic signature. These data reveal a delicate dependence of the overall magnetic and electronic response of MnBi2Te4 on the stoichiometry of the top layers. Our study suggests that perturbations resulting from surface oxidation may play a non-trivial role in the stabilization of the quantum anomalous Hall effect in this system and that understanding targeted modifications to the surface may open new routes for engineering novel topological and magnetic responses in this fascinating material.
△ Less
Submitted 22 May, 2022;
originally announced May 2022.
-
Full Configuration Interaction Excited-State Energies in Large Active Spaces from Subspace Iteration with Repeated Random Sparsification
Authors:
Samuel M. Greene,
Robert J. Webber,
James E. T. Smith,
Jonathan Weare,
Timothy C. Berkelbach
Abstract:
We present a stable and systematically improvable quantum Monte Carlo (QMC) approach to calculating excited-state energies, which we implement using our fast randomized iteration method for the full configuration interaction problem (FCI-FRI). Unlike previous excited-state quantum Monte Carlo methods, our approach, which is an asymmetric variant of subspace iteration, avoids the use of dot product…
▽ More
We present a stable and systematically improvable quantum Monte Carlo (QMC) approach to calculating excited-state energies, which we implement using our fast randomized iteration method for the full configuration interaction problem (FCI-FRI). Unlike previous excited-state quantum Monte Carlo methods, our approach, which is an asymmetric variant of subspace iteration, avoids the use of dot products of random vectors and instead relies upon trial vectors to maintain orthogonality and estimate eigenvalues. By leveraging recent advances, we apply our method to calculate ground- and excited-state energies of strongly correlated molecular systems in large active spaces, including the carbon dimer with 8 electrons in 108 orbitals (8e,108o), an oxo-Mn(salen) transition metal complex (28e,28o), ozone (18e,87o), and butadiene (22e,82o). In the majority of these test cases, our approach yields total excited-state energies that agree with those from state-of-the-art methods -- including heat-bath CI, the density matrix renormalization group approach, and FCIQMC -- to within sub-milliHartree accuracy. In all cases, estimated excitation energies agree to within about 0.1 eV.
△ Less
Submitted 12 October, 2022; v1 submitted 28 January, 2022;
originally announced January 2022.
-
Fracture mechanical behavior of polymers: 1. Amorphous glassy state
Authors:
Travis Smith,
Chaitanya Gupta,
Caleb Carr,
Shi-Qing Wang
Abstract:
Theoretical analyses and experiments have been carried out to investigate fracture behavior of glassy polymers. Our birefringence measurements quantify the local stress buildup at cut tip during different stages of drawing. Based on polymethyl methacrylate (PMMA), bisphenol A polycarbonate (PC) and polyethylene terephthalate (PET), we find several key results beyond the existing knowledge base. (1…
▽ More
Theoretical analyses and experiments have been carried out to investigate fracture behavior of glassy polymers. Our birefringence measurements quantify the local stress buildup at cut tip during different stages of drawing. Based on polymethyl methacrylate (PMMA), bisphenol A polycarbonate (PC) and polyethylene terephthalate (PET), we find several key results beyond the existing knowledge base. (1) The inherent fracture and yield strengths sigma_F(inh) and sigma_Y(inh) differ little in magnitude from the breaking and yield stress (sigma_b and sigma_y). (2) Stress intensification (SI) near a pre-through-cut builds up deviates from the theoretical description of linear elastic fracture mechanics (LEFM) upon approaching the cut tip. (3) SI meets a natural cutoff below which stress ceases to increase. (4) The stress stip at cut tip shows a trend of approximate linear increase with the far-field load s0 for all three polymers and different cut size a. (5) A characteristic length scale P emerges from the linear relation between stip and KI. For these glassy polymers, P is on the order of 0.1 mm. (6) Fracture toughness of brittle polymers is characterized by critical stress intensity factor K_Ic = sigma_F(inh)(2*pi*P)1/2, revealing relevance of the two crucial quantities. (7) The critical energy release rate GIc for brittle glass polymers such as PMMA is determined by the product of its work of fracture wF (of uncut specimen) and P. (8) The elusive fractocohesive length Lfc defined in the literature as G_Ic/w_F naturally arises from the new expression for G_Ic as stated in (7), i.e., it is essentially P. These results suggest that a great deal of future work is required to acquire additional understanding with regards to fracture and failure behaviors of plastics.
△ Less
Submitted 17 December, 2021; v1 submitted 25 November, 2021;
originally announced November 2021.
-
Non-Hermitian engineering of terahertz light using exceptional points in electrically tuneable collective light-matter interactions
Authors:
M. Said Ergoktas,
Sina Soleymani,
Nurbek Kakenov,
Thomas B. Smith,
Gokhan Bakan,
Kaiyuan Wang,
Sinan Balci,
Alessandro Principi,
Kostya S. Novoselov,
Sahin K. Ozdemir,
Coskun Kocabas
Abstract:
The topological structure associated with the branchpoint singularity around an exceptional point (EP) provides new tools for controlling the propagation of electromagnetic waves and their interaction with matter. To date, observation of EPs in light-matter interactions has remained elusive and has hampered further progress in applications of EP physics. Here, we demonstrate the emergence of EPs i…
▽ More
The topological structure associated with the branchpoint singularity around an exceptional point (EP) provides new tools for controlling the propagation of electromagnetic waves and their interaction with matter. To date, observation of EPs in light-matter interactions has remained elusive and has hampered further progress in applications of EP physics. Here, we demonstrate the emergence of EPs in the electrically controlled interaction of light with a collection of organic molecules in the terahertz regime at room temperature. We show, using time-domain terahertz spectroscopy, that the intensity and phase of terahertz pulses can be controlled by a gate voltage which drives the device across the EP. This fully electrically-tuneable system allows reconstructing the Riemann surface associated with the complex energy landscape and provides a topological control of light by tuning the loss-imbalance and frequency detuning of interacting modes. We anticipate that our work could pave the way for new means of dynamic control on the intensity and phase of terahertz field, develo** topological optoelectronics, and studying the manifestations of EP physics in the quantum correlations of the light emitted by a collection of emitters coupled to resonators.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
Momentum-space Gravity from the Quantum Geometry and Entropy of Bloch Electrons
Authors:
Tyler B. Smith,
Lakshmi Pullasseri,
Ajit Srivastava
Abstract:
Quantum geometry is a key quantity that distinguishes electrons in a crystal from those in the vacuum. Its study continues to provide insights into quantum materials, uncovering new design principles for their discovery. However, unlike the Berry curvature, an intuitive understanding of the quantum metric is lacking. Here, we show that the quantum metric of Bloch electrons leads to a momentum-spac…
▽ More
Quantum geometry is a key quantity that distinguishes electrons in a crystal from those in the vacuum. Its study continues to provide insights into quantum materials, uncovering new design principles for their discovery. However, unlike the Berry curvature, an intuitive understanding of the quantum metric is lacking. Here, we show that the quantum metric of Bloch electrons leads to a momentum-space gravity. In particular, by extending the semiclassical formulation of electron dynamics to second order, we find that the resulting velocity is modified by a geodesic term and becomes the momentum-space dual of the Lorentz force in curved space. We calculate this geodesic response for magic-angle twisted bilayer graphene and show that moiré systems with flat bands are ideal candidates to observe this effect. Extending this analogy with gravity further, we find that the momentum-space dual of the Einstein field equations remains sourceless for pure states while for mixed states it acquires a source term that depends on the von Neumann entropy, for small entropies. We compare this stress-energy equation with the weak-field limit of general relativity and conclude that the von Neumann entropy is the momentum-space dual of the gravitational potential. Consequently, the momentum-space geodesic equation for mixed states is modified by a term resembling an entropic force. Our results highlight connections between quantum geometry, momentum-space gravity and quantum information, prompting further exploration of this dual gravity in quantum materials.
△ Less
Submitted 30 December, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
Dispersive readout of Majorana qubits
Authors:
Thomas B. Smith,
Maja C. Cassidy,
David J. Reilly,
Stephen D. Bartlett,
Arne L. Grimsmo
Abstract:
We analyze a readout scheme for Majorana qubits based on dispersive coupling to a resonator. We consider two variants of Majorana qubits: the Majorana transmon and the Majorana box qubit. In both cases, the qubit-resonator interaction can produce sizeable dispersive shifts in the MHz range for reasonable system parameters, allowing for submicrosecond readout with high fidelity. For Majorana transm…
▽ More
We analyze a readout scheme for Majorana qubits based on dispersive coupling to a resonator. We consider two variants of Majorana qubits: the Majorana transmon and the Majorana box qubit. In both cases, the qubit-resonator interaction can produce sizeable dispersive shifts in the MHz range for reasonable system parameters, allowing for submicrosecond readout with high fidelity. For Majorana transmons, the light-matter interaction used for readout manifestly conserves Majorana parity, which leads to a notion of quantum nondemolition (QND) readout that is stronger than for conventional charge qubits. In contrast, Majorana box qubits only recover an approximately QND readout mechanism in the dispersive limit where the resonator detuning is large. We also compare dispersive readout to longitudinal readout for the Majorana box qubit. We show that the latter gives faster and higher fidelity readout for reasonable parameters, while having the additional advantage of being manifestly QND, and so may prove to be a better readout mechanism for these systems.
△ Less
Submitted 10 November, 2020; v1 submitted 31 August, 2020;
originally announced September 2020.
-
Topological Surface-plasmon-polaritons on Corrugated Metal-dielectric Surfaces
Authors:
Thomas Benjamin Smith,
Coskun Kocabas,
Alessandro Principi
Abstract:
We study topological surface-plasmon-polaritons at optical frequencies in diffraction gratings formed by bipartite corrugated metal-dielectric gratings. To do so we implement the theory as developed in Della Valle and Longhi to describe the amplitude of the field by an emergent Schrödinger-like equation. The tri-harmonic grating generates a bipartite Kronig-Penney model. Topologically protected lo…
▽ More
We study topological surface-plasmon-polaritons at optical frequencies in diffraction gratings formed by bipartite corrugated metal-dielectric gratings. To do so we implement the theory as developed in Della Valle and Longhi to describe the amplitude of the field by an emergent Schrödinger-like equation. The tri-harmonic grating generates a bipartite Kronig-Penney model. Topologically protected localised modes are then predicted to occur at the edges of the grating and at defects formed by the combination of two mirror antisymmetric corrugations, whose bulk invariant is a step-wise varying Zak phase in both cases.
△ Less
Submitted 16 August, 2020; v1 submitted 30 June, 2020;
originally announced July 2020.
-
Emergent Non-Hermitian Edge Polarisation in an Hermitian Tight-binding Model
Authors:
Thomas Benjamin Smith,
Alessandro Principi
Abstract:
We study a bipartite Kronig-Penney model with negative Dirac-delta potentials that may be used, amongst other models, to interpret plasmon propagation in nanoparticle arrays. Such a system can be mapped into a Su-Schrieffer-Heeger-like model however, in general, the overlap between 'atomic' wavefunctions of neighbouring sites is not negligible. In such a case, the edge states of the finite system,…
▽ More
We study a bipartite Kronig-Penney model with negative Dirac-delta potentials that may be used, amongst other models, to interpret plasmon propagation in nanoparticle arrays. Such a system can be mapped into a Su-Schrieffer-Heeger-like model however, in general, the overlap between 'atomic' wavefunctions of neighbouring sites is not negligible. In such a case, the edge states of the finite system, which retain their topological protection, appear to be either attenuated or amplified. This phenomenon, called "edge polarisation", is usually associated with an underlying non-Hermitian topology. By investigating the bulk system, we show that the resulting tight-binding eigenvalue problem may be made to appear non-Hermitian in this physical 'atomic' (lattice-site) basis. The resulting {\it effective} bulk Hamiltonian possesses ${\cal PT}$-symmetry and its topological invariant, interpreted in terms of a non-Hermitian classification, is found to be given by a bulk winding number of $\mathbb{Z}$-type. The observation of edge polarisation, through the established bulk-boundary correspondence, is then interpreted as an emerging non-Hermitian skin-effect of the {\it effective} bulk Hamiltonian. Therefore, the overlap matrix generates non-Hermitian-like effects in an otherwise Hermitian problem; a general fact applicable to a broader range of systems than just the one studied here.
△ Less
Submitted 24 June, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Superconductivity in a hole-doped Mott-insulating triangular adatom layer on a silicon surface
Authors:
Xuefeng Wu,
Fangfei Ming,
Tyler S. Smith,
Guowei Liu,
Fei Ye,
Kedong Wang,
Steven Johnston,
Hanno H. Weitering
Abstract:
Adsorption of one-third monolayer of Sn on an atomically-clean Si(111) substrate produces a two-dimensional triangular adatom lattice with one unpaired electron per site. This dilute adatom reconstruction is an antiferromagnetic Mott insulator; however, the system can be modulation-doped and metallized using heavily-doped p-type Si(111) substrates. Here, we show that the hole-doped dilute adatom l…
▽ More
Adsorption of one-third monolayer of Sn on an atomically-clean Si(111) substrate produces a two-dimensional triangular adatom lattice with one unpaired electron per site. This dilute adatom reconstruction is an antiferromagnetic Mott insulator; however, the system can be modulation-doped and metallized using heavily-doped p-type Si(111) substrates. Here, we show that the hole-doped dilute adatom layer on a degenerately doped p-type Si(111) wafer is superconducting with a critical temperature of 4.7 +- 0.3 K. While a phonon-mediated coupling scenario would be consistent with the observed TC, Mott correlations in the Sn-derived dangling-bond surface state could suppress the s-wave pairing channel. The latter suggests that the superconductivity in this triangular adatom lattice may be unconventional.
△ Less
Submitted 13 August, 2020; v1 submitted 6 December, 2019;
originally announced December 2019.
-
Coupled Sublattice Melting and Charge-Order Transition in Two Dimensions
Authors:
Tyler S. Smith,
Fangfei Ming,
Daniel González Trabada,
César González,
Diego Soler-Polo,
Fernando Flores,
José Ortega,
Hanno H. Weitering
Abstract:
Two-dimensional melting is one of the most fascinating and poorly understood phase transitions in nature. Theoretical investigations often point to a two-step melting scenario involving unbinding of topological defects at two distinct temperatures. Here we report on a novel melting transition of a charge-ordered K-Sn alloy monolayer on a silicon substrate. Melting starts with short-range positiona…
▽ More
Two-dimensional melting is one of the most fascinating and poorly understood phase transitions in nature. Theoretical investigations often point to a two-step melting scenario involving unbinding of topological defects at two distinct temperatures. Here we report on a novel melting transition of a charge-ordered K-Sn alloy monolayer on a silicon substrate. Melting starts with short-range positional fluctuations in the K sublattice while maintaining long-range order, followed by longer-range K diffusion over small domains, and ultimately resulting in a molten sublattice. Concomitantly, the charge-order of the Sn host lattice collapses in a multi-step process with both displacive and order-disorder transition characteristics. Our combined experimental and theoretical analysis provides a rare insight into the atomistic processes of a multi-step melting transition of a two-dimensional materials system.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
NetKet: A Machine Learning Toolkit for Many-Body Quantum Systems
Authors:
Giuseppe Carleo,
Kenny Choo,
Damian Hofmann,
James E. T. Smith,
Tom Westerhout,
Fabien Alet,
Emily J. Davis,
Stavros Efthymiou,
Ivan Glasser,
Sheng-Hsuan Lin,
Marta Mauri,
Guglielmo Mazzola,
Christian B. Mendl,
Evert van Nieuwenburg,
Ossian O'Reilly,
Hugo Théveniaut,
Giacomo Torlai,
Alexander Wietek
Abstract:
We introduce NetKet, a comprehensive open source framework for the study of many-body quantum systems using machine learning techniques. The framework is built around a general and flexible implementation of neural-network quantum states, which are used as a variational ansatz for quantum wave functions. NetKet provides algorithms for several key tasks in quantum many-body physics and quantum tech…
▽ More
We introduce NetKet, a comprehensive open source framework for the study of many-body quantum systems using machine learning techniques. The framework is built around a general and flexible implementation of neural-network quantum states, which are used as a variational ansatz for quantum wave functions. NetKet provides algorithms for several key tasks in quantum many-body physics and quantum technology, namely quantum state tomography, supervised learning from wave-function data, and ground state searches for a wide range of customizable lattice models. Our aim is to provide a common platform for open research and to stimulate the collaborative development of computational methods at the interface of machine learning and many-body physics.
△ Less
Submitted 29 March, 2019;
originally announced April 2019.
-
A Bipartite Kronig-Penney Model with Dirac Potential Scatterers
Authors:
Thomas Benjamin Smith,
Alessandro Principi
Abstract:
Here we present a simple extension to the age-old Kronig-Penney model, which is made to be bipartite by varying either the scatterer separations or the potential heights. In doing so, chiral (sublattice) symmetry can be introduced. When such a symmetry is present, topologically protected edge states are seen to exist. The solution proceeds through the conventional scattering formalism used to stud…
▽ More
Here we present a simple extension to the age-old Kronig-Penney model, which is made to be bipartite by varying either the scatterer separations or the potential heights. In doing so, chiral (sublattice) symmetry can be introduced. When such a symmetry is present, topologically protected edge states are seen to exist. The solution proceeds through the conventional scattering formalism used to study the Kronig-Penney model, which does not require further tight-binding approximations or map** into a Su-Schrieffer-Heeger model. The topological invariant for this specific system is found to be the winding of the reflection coefficient, ultimately linked to the system wavefunction. The solution of such a simple and illustrative 1D problem, whose topological content is extracted without requiring further tight-binding approximations, represents the novel aspect of our paper. The cases in which chiral symmetry is absent are then seen to not host topologically protected edge states, as verified by the behaviour of the reflection coefficient and the absence of winding.
△ Less
Submitted 13 May, 2019; v1 submitted 21 March, 2019;
originally announced March 2019.
-
Breakdown of the Wiedemann-Franz law in AB-stacked bilayer graphene
Authors:
Mohammad Zarenia,
Giovanni Vignale,
Thomas Benjamin Smith,
Alessandro Principi
Abstract:
We present a simple theory of thermoelectric transport in bilayer graphene and report our results for the electrical resistivity, the thermal resistivity, the Seebeck coefficient, and the Wiedemann-Franz ratio as functions of do** density and temperature. In the absence of disorder, the thermal resistivity tends to zero as the charge neutrality point is approached; the electric resistivity jumps…
▽ More
We present a simple theory of thermoelectric transport in bilayer graphene and report our results for the electrical resistivity, the thermal resistivity, the Seebeck coefficient, and the Wiedemann-Franz ratio as functions of do** density and temperature. In the absence of disorder, the thermal resistivity tends to zero as the charge neutrality point is approached; the electric resistivity jumps from zero to an intrinsic finite value, and the Seebeck coefficient diverges in the same limit. Even though these results are similar to those obtained for single-layer graphene, their derivation is considerably more delicate. The singularities are removed by the inclusion of a small amount of disorder, which leads to the appearance of a "window" of do** densities $0<n<n_c$ (with $n_c$ tending to zero in the zero-disorder limit) in which the Wiedemann-Franz law is severely violated.
△ Less
Submitted 27 February, 2019; v1 submitted 15 January, 2019;
originally announced January 2019.
-
Edge modes and Fabry-Perot Plasmonic Resonances in anomalous-Hall Thin Films
Authors:
Thomas Benjamin Smith,
Iacopo Torre,
Alessandro Principi
Abstract:
We study plasmon propagation on a metallic two-dimensional surface partially coated with a thin film of anomalous-Hall material. The resulting three regions, separated by two sharp interfaces, are characterised by different Hall conductivities but identical normal conductivities. A single bound mode is found, which can localise to either interface and has an asymmetric potential profile across the…
▽ More
We study plasmon propagation on a metallic two-dimensional surface partially coated with a thin film of anomalous-Hall material. The resulting three regions, separated by two sharp interfaces, are characterised by different Hall conductivities but identical normal conductivities. A single bound mode is found, which can localise to either interface and has an asymmetric potential profile across the region. For propagating modes, we calculate the reflection and transmission coefficients through the magnetic region. We find Airy transmission patterns with sharp maxima and minima as a function of the plasmon incidence angle. The system therefore behaves as a high-quality filter.
△ Less
Submitted 20 March, 2019; v1 submitted 20 December, 2018;
originally announced December 2018.
-
Majorana Qubit Readout Using Longitudinal Qubit-Resonator Interaction
Authors:
Arne L. Grimsmo,
Thomas Smith
Abstract:
We propose a quantum non-demolition Majorana qubit readout protocol based on parametricmodulation of a longitudinal interaction between a pair of Majorana bound states and a resonator. The interaction can be modulated through microwave frequency gate-voltage or flux control of a tunable tunnel barrier. The qubit-resonator coupling is quantum non-demolition to exponential accuracy, a property inher…
▽ More
We propose a quantum non-demolition Majorana qubit readout protocol based on parametricmodulation of a longitudinal interaction between a pair of Majorana bound states and a resonator. The interaction can be modulated through microwave frequency gate-voltage or flux control of a tunable tunnel barrier. The qubit-resonator coupling is quantum non-demolition to exponential accuracy, a property inherited from the topological nature of the Majorana zero modes. The same mechanism as used for single-qubit readout can also be extended to perform multi-qubit measurements and be used to enact long range entangling gates.
△ Less
Submitted 25 June, 2019; v1 submitted 20 September, 2018;
originally announced September 2018.
-
Fast spin exchange between two distant quantum dots
Authors:
Filip K. Malinowski,
Frederico Martins,
Thomas B. Smith,
Stephen D. Bartlett,
Andrew C. Doherty,
Peter D. Nissen,
Saeed Fallahi,
Geoffrey C. Gardner,
Michael J. Manfra,
Charles M. Marcus,
Ferdinand Kuemmeth
Abstract:
The Heisenberg exchange interaction between neighboring quantum dots allows precise voltage control over spin dynamics, due to the ability to precisely control the overlap of orbital wavefunctions by gate electrodes. This allows the study of fundamental electronic phenomena and finds applications in quantum information processing. Although spin-based quantum circuits based on short-range exchange…
▽ More
The Heisenberg exchange interaction between neighboring quantum dots allows precise voltage control over spin dynamics, due to the ability to precisely control the overlap of orbital wavefunctions by gate electrodes. This allows the study of fundamental electronic phenomena and finds applications in quantum information processing. Although spin-based quantum circuits based on short-range exchange interactions are possible, the development of scalable, longer-range coupling schemes constitutes a critical challenge within the spin-qubit community. Approaches based on capacitative coupling and cavity-mediated interactions effectively couple spin qubits to the charge degree of freedom, making them susceptible to electrically-induced decoherence. The alternative is to extend the range of the Heisenberg exchange interaction by means of a quantum mediator. Here, we show that a multielectron quantum dot with 50-100 electrons serves as an excellent mediator, preserving speed and coherence of the resulting spin-spin coupling while providing several functionalities that are of practical importance. These include speed (mediated two-qubit rates up to several gigahertz), distance (of order of a micrometer), voltage control, possibility of sweet spot operation (reducing susceptibility to charge noise), and reversal of the interaction sign (useful for dynamical decoupling from noise).
△ Less
Submitted 29 August, 2018;
originally announced August 2018.
-
Enhanced photoenergy harvesting and extreme Thomson effect in hydrodynamic electronic systems
Authors:
Trond I. Andersen,
Thomas B. Smith,
Alessandro Principi
Abstract:
The thermoelectric (TE) properties of a material are dramatically altered when electron-electron interactions become the dominant scattering mechanism. In the degenerate hydrodynamic regime, the thermal conductivity is reduced and becomes a {\it decreasing} function of the electronic temperature, due to a violation of the Wiedemann-Franz (WF) law. We here show how this peculiar temperature depende…
▽ More
The thermoelectric (TE) properties of a material are dramatically altered when electron-electron interactions become the dominant scattering mechanism. In the degenerate hydrodynamic regime, the thermal conductivity is reduced and becomes a {\it decreasing} function of the electronic temperature, due to a violation of the Wiedemann-Franz (WF) law. We here show how this peculiar temperature dependence gives rise to new striking TE phenomena. These include an 80-fold increase in TE efficiency compared to the WF regime, dramatic qualitative changes in the steady state temperature profile, and an anomalously large Thomson effect. In graphene, which we pay special attention to here, these effects are further amplified due to a doubling of the thermopower.
△ Less
Submitted 19 January, 2019; v1 submitted 25 June, 2018;
originally announced June 2018.
-
Zero-bias anomaly in nano-scale hole-doped Mott insulators on a triangular silicon surface
Authors:
Fangfei Ming,
Tyler S. Smith,
Steven Johnston,
Paul C. Snijders,
Hanno H. Weitering
Abstract:
Adsorption of 1/3 monolayer of Sn on a heavily-doped p-type Si(111) substrate results in the formation of a hole-doped Mott insulator, with electronic properties that are remarkably similar to those of the high-Tc copper oxide compounds. In this work, we show that the maximum hole-density of this system increases with decreasing domain size as the area of the Mott insulating domains approaches the…
▽ More
Adsorption of 1/3 monolayer of Sn on a heavily-doped p-type Si(111) substrate results in the formation of a hole-doped Mott insulator, with electronic properties that are remarkably similar to those of the high-Tc copper oxide compounds. In this work, we show that the maximum hole-density of this system increases with decreasing domain size as the area of the Mott insulating domains approaches the nanoscale regime. Concomitantly, scanning tunneling spectroscopy data at 4.4 K reveal an increasingly prominent zero bias anomaly (ZBA). We consider two different scenarios as potential mechanisms for this ZBA: chiral d_(x^2 -y^2 )+ id_xy wave superconductivity and a dynamical Coulomb blockade (DCB) effect. The latter arises due to the formation of a resistive depletion layer between the nano-domains and the substrate. Both models fit the tunneling spectra with weaker ZBAs, while the DCB model clearly fits better to spectra recorded at higher temperatures or from the smallest domains with the strongest ZBA. Consistently, STS spectra from the lightly-doped substrates display oscillatory behavior that can be attributed to conventional Coulomb staircase behavior, which becomes stronger for smaller sized domains. We conclude that the ZBA is predominantly due to a DCB effect, while a superconducting instability is absent or a minor contributing factor.
△ Less
Submitted 7 December, 2017;
originally announced December 2017.
-
Atomic and electronic structure of doped Si(111)(2root3x2root3)R30(degrees)-Sn interfaces
Authors:
Seho Yi,
Fangfei Ming,
Ying-Tzu Huang,
Tyler S. Smith,
Xiyou Peng,
Weisong Tu,
Daniel Mulugeta,
Renee D. Diehl,
Paul C. Snijders,
Jun-Hyung Cho,
Hanno H. Weitering
Abstract:
The hole doped Si(111)(2root3x2root3)R30(degrees)-Sn interface exhibits a symmetry-breaking insulator-insulator transition below 100 K that appears to be triggered by electron tunneling into the empty surface-state bands. No such transition is seen in electron-doped systems. To elucidate the nature and driving force of this phenomenon, the structure of the interface must be resolved. Here we repor…
▽ More
The hole doped Si(111)(2root3x2root3)R30(degrees)-Sn interface exhibits a symmetry-breaking insulator-insulator transition below 100 K that appears to be triggered by electron tunneling into the empty surface-state bands. No such transition is seen in electron-doped systems. To elucidate the nature and driving force of this phenomenon, the structure of the interface must be resolved. Here we report on an extensive experimental and theoretical study, including scanning tunneling microscopy and spectroscopy (STM/STS), dynamical low-energy electron diffraction (LEED) analysis, and density functional theory (DFT) calculations, to elucidate the structure of this interface. We consider six different structure models, three of which have been proposed before, and conclude that only two of them can account for the majority of experimental data. One of them is the model according to Tornevik et al. [C. Tornevik et al., Phys. Rev. B 44, 13144 (1991)] with a total Sn coverage of 14/12 monolayers (ML). The other is the 'revised trimer model' with a total Sn coverage of 13/12 ML, introduced in this work. These two models are very difficult to discriminate on the basis of DFT or LEED alone, but STS data clearly point toward the Törnevik model as the most viable candidate among the models considered here. The STS data also provide additional insights regarding the electron-injection-driven phase transformation as well as the critical role of valence band holes in this process. Similar processes may occur at other metal/semiconductor interfaces, provided they are non-metallic and can be doped. This could open up a new pathway toward the creation of novel surface phases with potentially very interesting and desirable electronic properties.
△ Less
Submitted 31 March, 2018; v1 submitted 1 November, 2017;
originally announced November 2017.
-
Spin of a multielectron quantum dot and its interaction with a neighboring electron
Authors:
Filip K. Malinowski,
Frederico Martins,
Thomas B. Smith,
Stephen D. Bartlett,
Andrew C. Doherty,
Peter D. Nissen,
Saeed Fallahi,
Geoffrey C. Gardner,
Michael J. Manfra,
Charles M. Marcus,
Ferdinand Kuemmeth
Abstract:
We investigate the spin of a multielectron GaAs quantum dot in a sequence of nine charge occupancies, by exchange coupling the multielectron dot to a neighboring two-electron double quantum dot. For all nine occupancies, we make use of a leakage spectroscopy technique to reconstruct the spectrum of spin states in the vicinity of the interdot charge transition between a single- and a multielectron…
▽ More
We investigate the spin of a multielectron GaAs quantum dot in a sequence of nine charge occupancies, by exchange coupling the multielectron dot to a neighboring two-electron double quantum dot. For all nine occupancies, we make use of a leakage spectroscopy technique to reconstruct the spectrum of spin states in the vicinity of the interdot charge transition between a single- and a multielectron quantum dot. In the same regime we also perform time-resolved measurements of coherent exchange oscillations between the single- and multielectron quantum dot. With these measurements, we identify distinct characteristics of the multielectron spin state, depending on whether the dot's occupancy is even or odd. For three out of four even occupancies we do not observe any exchange interaction with the single quantum dot, indicating a spin-0 ground state. For the one remaining even occupancy, we observe an exchange interaction that we associate with a spin-1 multielectron quantum dot ground state. For all five of the odd occupancies, we observe an exchange interaction associated with a spin-1/2 ground state. For three of these odd occupancies, we clearly demonstrate that the exchange interaction changes sign in the vicinity of the charge transition. For one of these, the exchange interaction is negative (i.e. triplet-preferring) beyond the interdot charge transition, consistent with the observed spin-1 for the next (even) occupancy. Our experimental results are interpreted through the use of a Hubbard model involving two orbitals of the multielectron quantum dot. Allowing for the spin correlation energy (i.e. including a term favoring Hund's rules) and different tunnel coupling to different orbitals, we qualitatively reproduce the measured exchange profiles for all occupancies.
△ Less
Submitted 27 October, 2017;
originally announced October 2017.
-
Realization of a hole-doped Mott insulator on a triangular silicon lattice
Authors:
Fangfei Ming,
Steve Johnston,
Daniel Mulugeta,
Tyler S. Smith,
Paolo Vilmercati,
Geunseop Lee,
Thomas A. Maier,
Paul C. Snijders,
Hanno H. Weitering
Abstract:
The physics of doped Mott insulators is at the heart of some of the most exotic physical phenomena in materials research including insulator-metal transitions, colossal magneto-resistance, and high-temperature superconductivity in layered perovskite compounds. Advances in this field would greatly benefit from the availability of new material systems with similar richness of physical phenomena, but…
▽ More
The physics of doped Mott insulators is at the heart of some of the most exotic physical phenomena in materials research including insulator-metal transitions, colossal magneto-resistance, and high-temperature superconductivity in layered perovskite compounds. Advances in this field would greatly benefit from the availability of new material systems with similar richness of physical phenomena, but with fewer chemical and structural complications in comparison to oxides. Using scanning tunneling microscopy and spectroscopy, we show that such a system can be realized on a silicon platform. Adsorption of one-third monolayer of Sn atoms on a Si(111) surface produces a triangular surface lattice with half-filled dangling bond orbitals. Modulation hole-do** of these dangling bonds unveils clear hallmarks of Mott physics, such as spectral weight transfer and the formation of quasi-particle states at the Fermi level, well-defined Fermi contour segments, and a sharp singularity in the density of states. These observations are remarkably similar to those made in complex oxide materials, including high-temperature superconductors, but highly extraordinary within the realm of conventional sp-bonded semiconductor materials. It suggests that exotic quantum matter phases can be realized and engineered on silicon-based materials platforms.
△ Less
Submitted 22 October, 2017;
originally announced October 2017.
-
Cheap and near exact CASSCF with large active spaces
Authors:
James E. T. Smith,
Adam A. Holmes,
Bastien Mussard,
Sandeep Sharma
Abstract:
We use the recently-developed Heat-bath Configuration Interaction (HCI) algorithm as an efficient active-space solver to perform multi-configuration self-consistent field calculations (HCISCF) with large active spaces. We give a detailed derivation of the theory and show that difficulties associated with non-variationality of the HCI procedure can be overcome by making use of the Lagrangian formul…
▽ More
We use the recently-developed Heat-bath Configuration Interaction (HCI) algorithm as an efficient active-space solver to perform multi-configuration self-consistent field calculations (HCISCF) with large active spaces. We give a detailed derivation of the theory and show that difficulties associated with non-variationality of the HCI procedure can be overcome by making use of the Lagrangian formulation to calculate the HCI relaxed two body reduced density matrix. HCISCF is then used to study the electronic structure of butadiene, pentacene, and Fe-porphyrin. One of the most striking results of our work is that the converged active space orbitals obtained from HCISCF are relatively insensitive to the accuracy of the HCI calculation. This allows us to obtain nearly converged CASSCF energies with an estimated error of less than 1 mHa using the orbitals obtained from the HCISCF procedure in which the integral transformation is the dominant cost. For example, an HCISCF calculation on Fe-Porphyrin model complex with an active space of (44e, 44o) took only 412 seconds per iteration on a single node containing 28 cores, out of which 185 seconds were spent in the HCI calculation and the remaining 227 seconds were mainly used for integral transformation. Finally, we also show that active-space orbitals can be optimized using HCISCF to substantially speed up the convergence of the HCI energy to the Full CI limit because HCI is not invariant to unitary transformations within the active space.
△ Less
Submitted 29 August, 2017; v1 submitted 24 August, 2017;
originally announced August 2017.
-
Photo-induced electron transfer in the strong coupling regime: Waveguide-plasmon polaritons
Authors:
Peng Zeng,
Jasper Cadusch,
Debadi Chakraborty,
Trevor A. Smith,
Ann Roberts,
John E. Sader,
Timothy J. Davis,
Daniel E. Gomez
Abstract:
Reversible exchange of photons between a material and an optical cavity can lead to the formation of hybrid light--matter states where material properties such as the work function\cite{Hutchison_AM2013a}, chemical reactivity\cite{Hutchison_ACIE2012a}, ultra--fast energy relaxation \cite{Salomon_ACIE2009a,Gomez_TJOPCB2012a} and electrical conductivity\cite{Orgiu_NM2015a} of matter differ significa…
▽ More
Reversible exchange of photons between a material and an optical cavity can lead to the formation of hybrid light--matter states where material properties such as the work function\cite{Hutchison_AM2013a}, chemical reactivity\cite{Hutchison_ACIE2012a}, ultra--fast energy relaxation \cite{Salomon_ACIE2009a,Gomez_TJOPCB2012a} and electrical conductivity\cite{Orgiu_NM2015a} of matter differ significantly to those of the same material in the absence of strong interactions with the electromagnetic fields. Here we show that strong light--matter coupling between confined photons on a semiconductor waveguide and localised plasmon resonances on metal nanowires modifies the efficiency of the photo--induced charge--transfer rate of plasmonic derived (hot) electrons into accepting states in the semiconductor material. Ultra--fast spectroscopy measurements reveal a strong correlation between the amplitude of the transient signals, attributed to electrons residing in the semiconductor, and the hybridization of waveguide and plasmon excitations.
△ Less
Submitted 23 December, 2015;
originally announced December 2015.
-
Effect of chain stiffness on the competition between crystallization and glass-formation in model colloidal polymers
Authors:
Hong T. Nguyen,
Tyler B. Smith,
Robert S. Hoy,
Nikos Ch. Karayiannis
Abstract:
We map out the solid-state morphologies formed by model soft-pearl-necklace polymers as a function of bending stiffness $k_b$ spanning the range from fully flexible to rodlike chains. The ratio of Kuhn length to bead diameter ($l_K/r_0$) increases monotonically with increasing $k_b$ and yields a one-parameter model that relates chain shape to bulk morphology and yields insights into the packing of…
▽ More
We map out the solid-state morphologies formed by model soft-pearl-necklace polymers as a function of bending stiffness $k_b$ spanning the range from fully flexible to rodlike chains. The ratio of Kuhn length to bead diameter ($l_K/r_0$) increases monotonically with increasing $k_b$ and yields a one-parameter model that relates chain shape to bulk morphology and yields insights into the packing of anisotropic particles. In the flexible limit, monomers occupy the sites of close-packed crystallites while chains retain random-walk-like order. In the rodlike limit, nematic chain ordering typical of lamellar precursors coexists with close-packing. At intermediate values of bending stiffness the competition between random-walk-like and nematic chain ordering produces glass-formation; the range of $k_b$ over which this occurs increases with the thermal cooling rate $|\dot{T}|$ implemented in our molecular dynamics simulations. Finally, values of $k_b$ between the glass-forming and rodlike ranges produce complex ordered phases such as close-packed spirals. Our results should prove useful for rational design of dense colloidal-polymer phases with desired morphologies.
△ Less
Submitted 1 February, 2015; v1 submitted 6 June, 2014;
originally announced June 2014.
-
Laterally driven interfaces in the three-dimensional Ising lattice gas
Authors:
Thomas H. R. Smith,
Oleg Vasilyev,
Anna Maciołek,
Matthias Schmidt
Abstract:
We study the steady state of a phase-separated driven Ising lattice gas in three dimensions using computer simulations with Kawasaki dynamics. An external force field F(z) acts in the x direction parallel to the interface, creating a lateral order parameter current j^x(z) which varies with distance z from the interface. Above the roughening temperature, our data for `shear-like' linear variation o…
▽ More
We study the steady state of a phase-separated driven Ising lattice gas in three dimensions using computer simulations with Kawasaki dynamics. An external force field F(z) acts in the x direction parallel to the interface, creating a lateral order parameter current j^x(z) which varies with distance z from the interface. Above the roughening temperature, our data for `shear-like' linear variation of F(z) are in agreement with the picture wherein shear acts as effective confinement in this system, thus supressing the interfacial capillary-wave fluctuations. We find sharper magnetisation profiles and reduced interfacial width as compared to equilibrium. Pair correlations are more suppressed in the vorticity direction y than in the driving direction; the opposite holds for the structure factor. Lateral transport of capillary waves occurs for those forms of F(z) for which the current j^x(z) is an odd function of z, for example the shear-like drive, and a `step-like' driving field. For a V-shaped driving force no such motion occurs, but capillary waves are suppressed more strongly than for the shear-like drive. These findings are in agreement with our previous simulation studies in two dimensions. Near and below the (equilibrium) roughening temperature the effective-confinement picture ceases to work, but the lateral motion of the interface persists.
△ Less
Submitted 24 May, 2010;
originally announced May 2010.
-
Equilibrium states of a test particle coupled to finite size heat baths
Authors:
Qun Wei,
S. Taylor Smith,
Roberto Onofrio
Abstract:
We report on numerical simulations of the dynamics of a test particle coupled to competing Boltzmann heat baths of finite size. After discussing some features of the single bath case, we show that the presence of two heat baths further constraints the conditions necessary for the test particle to thermalize with the heat baths. We find that thermalization is a spectral property in which the oscil…
▽ More
We report on numerical simulations of the dynamics of a test particle coupled to competing Boltzmann heat baths of finite size. After discussing some features of the single bath case, we show that the presence of two heat baths further constraints the conditions necessary for the test particle to thermalize with the heat baths. We find that thermalization is a spectral property in which the oscillators of the bath with frequencies in the range of the test particle characteristic frequency determine its degree of thermalization. We also find an unexpected frequency shift of the test particle response with respect to the spectra of the two heat baths. Finally, we discuss implications of our results for the study of high-frequency nanomechanical resonators through cold dam** cooling techniques, and for engineering reservoirs capable of mitigating the back-action on a mechanical system.
△ Less
Submitted 29 March, 2010; v1 submitted 26 March, 2010;
originally announced March 2010.
-
Lateral transport of thermal capillary waves
Authors:
Thomas H. R. Smith,
Oleg Vasilyev,
Anna Maciolek,
Matthias Schmidt
Abstract:
We demonstrate that collective motion of interfacial fluctuations can occur at the interface between two coexisting thermodynamic phases. Based on computer simulation results for driven diffusive Ising and Blume-Capel models, we conjecture that the thermal capillary waves at a planar interface travel along the interface if the lateral order parameter current j_op(y) is an odd function of the dis…
▽ More
We demonstrate that collective motion of interfacial fluctuations can occur at the interface between two coexisting thermodynamic phases. Based on computer simulation results for driven diffusive Ising and Blume-Capel models, we conjecture that the thermal capillary waves at a planar interface travel along the interface if the lateral order parameter current j_op(y) is an odd function of the distance y from the interface and hence possesses opposite directions in the two phases. Such motion does not occur if j_op(y) is an even function of y. A discrete Gaussian interface model with effective dynamics exhibits similiar transport phenomena but with a simpler dispersion relation. These findings open up avenues for controlled interfacial transport on the nanoscale.
△ Less
Submitted 23 April, 2009;
originally announced April 2009.
-
Thermalization in open classical systems with finite heat baths
Authors:
S. Taylor Smith,
Roberto Onofrio
Abstract:
We discuss thermalization of a test particle schematized as a harmonic oscillator and coupled to a Boltzmann heat bath of finite size and with a finite bandwidth for the frequencies of its particles. We find that complete thermalization only occurs when the test particle frequency is within a certain range of the bath particle frequencies, and for a certain range of mass ratios between the test…
▽ More
We discuss thermalization of a test particle schematized as a harmonic oscillator and coupled to a Boltzmann heat bath of finite size and with a finite bandwidth for the frequencies of its particles. We find that complete thermalization only occurs when the test particle frequency is within a certain range of the bath particle frequencies, and for a certain range of mass ratios between the test particle and the bath particles. These results have implications for the study of classical and quantum behaviour of high-frequency nanomechanical resonators.
△ Less
Submitted 17 October, 2008;
originally announced October 2008.
-
Interfaces in driven Ising models: shear enhances confinement
Authors:
Thomas H. R. Smith,
Oleg Vasilyev,
Douglas B. Abraham,
Anna Maciołek,
Matthias Schmidt
Abstract:
We use a phase-separated driven two-dimensional Ising lattice gas to study fluid interfaces exposed to shear flow parallel to the interface. The interface is stabilized by two parallel walls with opposing surface fields and a driving field parallel to the walls is applied which (i) either acts locally at the walls or (ii) varies linearly with distance across the strip. Using computer simulations…
▽ More
We use a phase-separated driven two-dimensional Ising lattice gas to study fluid interfaces exposed to shear flow parallel to the interface. The interface is stabilized by two parallel walls with opposing surface fields and a driving field parallel to the walls is applied which (i) either acts locally at the walls or (ii) varies linearly with distance across the strip. Using computer simulations with Kawasaki dynamics, we find that the system reaches a steady state in which the magnetisation profile is the same as that in equilibrium, but with a rescaled length implying a reduction of the interfacial width. An analogous effect was recently observed in sheared phase-separated colloidal dispersions. Pair correlation functions along the interface decay more rapidly with distance under drive than in equilibrium and for cases of weak drive can be rescaled to the equilibrium result.
△ Less
Submitted 15 July, 2008; v1 submitted 26 February, 2008;
originally announced February 2008.
-
The Geometry of Algorithms with Orthogonality Constraints
Authors:
Alan Edelman,
T. A. Arias,
Steven T. Smith
Abstract:
In this paper we develop new Newton and conjugate gradient algorithms on the Grassmann and Stiefel manifolds. These manifolds represent the constraints that arise in such areas as the symmetric eigenvalue problem, nonlinear eigenvalue problems, electronic structures computations, and signal processing. In addition to the new algorithms, we show how the geometrical framework gives penetrating new…
▽ More
In this paper we develop new Newton and conjugate gradient algorithms on the Grassmann and Stiefel manifolds. These manifolds represent the constraints that arise in such areas as the symmetric eigenvalue problem, nonlinear eigenvalue problems, electronic structures computations, and signal processing. In addition to the new algorithms, we show how the geometrical framework gives penetrating new insights allowing us to create, understand, and compare algorithms. The theory proposed here provides a taxonomy for numerical linear algebra algorithms that provide a top level mathematical view of previously unrelated algorithms. It is our hope that developers of new algorithms and perturbation theories will benefit from the theory, methods, and examples in this paper.
△ Less
Submitted 19 June, 1998;
originally announced June 1998.