-
Fitting to magnetic forces improves the reliability of magnetic Moment Tensor Potentials
Authors:
Alexey S. Kotykhov,
Konstantin Gubaev,
Vadim Sotskov,
Christian Tantardini,
Max Hodapp,
Alexander V. Shapeev,
Ivan S. Novikov
Abstract:
We propose a novel method for fitting machine-learning interatomic potentials with magnetic degrees of freedom, namely, magnetic Moment Tensor Potentials (mMTP). The main feature of the methodology consists in fitting mMTP to magnetic forces (negative derivatives of energies with respect to magnetic moments) derived from spin-polarized density functional theory calculations. We test our method on…
▽ More
We propose a novel method for fitting machine-learning interatomic potentials with magnetic degrees of freedom, namely, magnetic Moment Tensor Potentials (mMTP). The main feature of the methodology consists in fitting mMTP to magnetic forces (negative derivatives of energies with respect to magnetic moments) derived from spin-polarized density functional theory calculations. We test our method on the bcc Fe-Al system with different composition. Specifically, we calculate formation energies, equilibrium lattice parameter, and total cell magnetization. Our findings demonstrate a precise match between values calculated with mMTP and those obtained by DFT at zero temperature. Additionally, using molecular dynamics, we estimate the finite temperature lattice parameter and capture the cell expansion as was previously revealed in experiment. We demonstrate that mMTPs fitted to magnetic forces, increase the relaxation reliability, which is the percent of successfully relaxed structures (i.e. with almost zero forces, stresses, and magnetic moments after the optimization of geometry). Eventually, we show that the proposed methodology can provide an accurate and reliable mMTP with reduced number of computationally complex spin-polarized density functional theory calculations.
△ Less
Submitted 17 May, 2024; v1 submitted 11 May, 2024;
originally announced May 2024.
-
A moment tensor potential for lattice thermal conductivity calculations of alpha and beta phases of Ga2O3
Authors:
Nikita Rybin,
Alexander Shapeev
Abstract:
Calculations of heat transport in crystalline materials have recently become mainstream, thanks to machine-learned interatomic potentials that allow for significant computational cost reductions while maintaining the accuracy of first-principles calculations. Moment tensor potentials (MTP) are among the most efficient and accurate models in this regard. In this study, we demonstrate the applicatio…
▽ More
Calculations of heat transport in crystalline materials have recently become mainstream, thanks to machine-learned interatomic potentials that allow for significant computational cost reductions while maintaining the accuracy of first-principles calculations. Moment tensor potentials (MTP) are among the most efficient and accurate models in this regard. In this study, we demonstrate the application of MTP to the calculation of the lattice thermal conductivity of alpha and beta Ga2O3. Although MTP is commonly employed for lattice thermal conductivity calculations, the advantages of applying the active learning methodology for potential generation is often overlooked. Here, we emphasize its importance and illustrate how it enables the generation of a robust and accurate interatomic potential while maintaining a moderate-sized training dataset.
△ Less
Submitted 29 February, 2024;
originally announced March 2024.
-
Thermophysical Properties of Molten FLiNaK: a Moment Tensor Potential Approach
Authors:
Rybin Nikita,
Dmitrii Maksimov,
Yuriy Zaikov,
Alexander Shapeev
Abstract:
Fluoride salts demonstrate significant potential for applications in next-generation nuclear reactors, necessitating a comprehensive understanding of their thermophysical properties for technological advancements. Experimental measurement of these properties poses challenges, due to factors such as high temperatures, impurity control, and corrosion. Consequently, precise computational modeling met…
▽ More
Fluoride salts demonstrate significant potential for applications in next-generation nuclear reactors, necessitating a comprehensive understanding of their thermophysical properties for technological advancements. Experimental measurement of these properties poses challenges, due to factors such as high temperatures, impurity control, and corrosion. Consequently, precise computational modeling methods become essential for predicting the thermophysical properties of molten salts. In this work, we performed molecular dynamics (MD) simulations of several thermophysical properties of the eutectic salt mixture LiF-NaF-KF (FLiNaK) melt, including density, self-diffusion coefficients, viscosity, and thermal conductivity. We demonstrated the successful application of moment tensor potentials (MTP) as an accurate model for interatomic interactions in FLiNaK. Our results on thermophysical properties calculations exhibit strong agreement with experimental data. An important aspect of our methodology is the incorporation of an active learning scheme, which enables the generation of a robust and accurate potential, while maintaining a moderate-sized training dataset.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Mechanical properties of single and polycrystalline solids from machine learning
Authors:
Faridun N. Jalolov,
Evgeny V. Podryabinkin,
Artem R. Oganov,
Alexander V. Shapeev,
Alexander G. Kvashnin
Abstract:
Calculations of elastic and mechanical characteristics of non-crystalline solids are challenging due to high computation cost of $ab$ $initio$ methods and low accuracy of empirical potentials. We propose a computational technique towards efficient calculations of mechanical properties of polycrystals, composites, and multi-phase systems from atomistic simulation with high accuracy and reasonable c…
▽ More
Calculations of elastic and mechanical characteristics of non-crystalline solids are challenging due to high computation cost of $ab$ $initio$ methods and low accuracy of empirical potentials. We propose a computational technique towards efficient calculations of mechanical properties of polycrystals, composites, and multi-phase systems from atomistic simulation with high accuracy and reasonable computational cost. It is based on using actively learned machine learning interatomic potentials (MLIPs) trained on a local fragments of the polycrystalline system for which forces, stresses and energies are computed by using $ab$ $initio$ calculations. Developed approach is used for calculation the dependence of elastic moduli of polycrystalline diamond on the grain size. This technique allows one to perform large-scale calculations of mechanical properties of complex solids of various compositions and structures with high accuracy making the transition from ideal (single crystal) systems to more realistic ones.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Bayesian inference of composition-dependent phase diagrams
Authors:
Timofei Miryashkin,
Olga Klimanova,
Vladimir Ladygin,
Alexander Shapeev
Abstract:
Phase diagrams serve as a highly informative tool for materials design, encapsulating information about the phases that a material can manifest under specific conditions. In this work, we develop a method in which Bayesian inference is employed to combine thermodynamic data from molecular dynamics (MD), melting point simulations, and phonon calculations, process these data, and yield a temperature…
▽ More
Phase diagrams serve as a highly informative tool for materials design, encapsulating information about the phases that a material can manifest under specific conditions. In this work, we develop a method in which Bayesian inference is employed to combine thermodynamic data from molecular dynamics (MD), melting point simulations, and phonon calculations, process these data, and yield a temperature-concentration phase diagram. The employed Bayesian framework yields us not only the free energies of different phases as functions of temperature and concentration but also the uncertainties of these free energies originating from statistical errors inherent to finite-length MD trajectories. Furthermore, it extrapolates the results of the finite-atom calculations to the infinite-atom limit and facilitates the choice of temperature, chemical potentials, and the number of atoms conducting the next simulation with which will be the most efficient in reducing the uncertainty of the phase diagram. The developed algorithm was successfully tested on two binary systems, Ge-Si and K-Na, in the full range of concentrations and temperatures.
△ Less
Submitted 3 September, 2023;
originally announced September 2023.
-
Accurate melting point prediction through autonomous physics-informed learning
Authors:
Olga Klimanova,
Timofei Miryashkin,
Alexander Shapeev
Abstract:
We present an algorithm for computing melting points by autonomously learning from coexistence simulations in the NPT ensemble. Given the interatomic interaction model, the method makes decisions regarding the number of atoms and temperature at which to conduct simulations, and based on the collected data predicts the melting point along with the uncertainty, which can be systematically improved w…
▽ More
We present an algorithm for computing melting points by autonomously learning from coexistence simulations in the NPT ensemble. Given the interatomic interaction model, the method makes decisions regarding the number of atoms and temperature at which to conduct simulations, and based on the collected data predicts the melting point along with the uncertainty, which can be systematically improved with more data. We demonstrate how incorporating physical models of the solid-liquid coexistence evolution enhances the algorithm's accuracy and enables optimal decision-making to effectively reduce predictive uncertainty. To validate our approach, we compare the results of 20 melting point calculations from the literature to the results of our calculations, all conducted with same interatomic potentials. Remarkably, we observe significant deviations in about one-third of the cases, underscoring the need for accurate and reliable algorithms for materials property calculations.
△ Less
Submitted 13 October, 2023; v1 submitted 23 June, 2023;
originally announced June 2023.
-
A machine learning potential-based generative algorithm for on-lattice crystal structure prediction
Authors:
Vadim Sotskov,
Alexander V. Shapeev,
Evgeny V. Podryabinkin
Abstract:
We propose a method for crystal structure prediction based on a new structure generation algorithm and on-lattice machine learning interatomic potentials. Our algorithm generates the atomic configurations assigning atomic species to sites of the given lattice, and uses cluster expansion or low-rank potential to evaluate their energy. We demonstrate two benefits of such approach. First, our structu…
▽ More
We propose a method for crystal structure prediction based on a new structure generation algorithm and on-lattice machine learning interatomic potentials. Our algorithm generates the atomic configurations assigning atomic species to sites of the given lattice, and uses cluster expansion or low-rank potential to evaluate their energy. We demonstrate two benefits of such approach. First, our structure generation algorithm offers a ``smart'' configurational space sampling, targeting low-energy structures which significantly reduces computational costs. Second, the application of machine learning interatomic potentials significantly reduces the number of DFT calculations. We discuss how our algorithm resembles the latent diffusion models for image generation. We demonstrate the efficiency of our method by constructing the convex hull of Nb-Mo-Ta-W system, including binary and ternary Nb-W and Mo-Ta-W subsystems. We found new binary, ternary, and quaternary stable structures that are not reported in the AFLOW database which we choose as our baseline. Due to the computational efficiency of our method we anticipate that it can pave the way towards efficient high-throughput discovery of multicomponent materials.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Machine-learning Driven Synthesis of TiZrNbHfTaC5 High-Entropy Carbide
Authors:
Alexander Ya. Pak,
Vadim Sotskov,
Arina A. Gumovskaya,
Yuliya Z. Vassilyeva,
Zhanar S. Bolatova,
Yulia A. Kvashnina,
Gennady Ya. Mamontov,
Alexander V. Shapeev,
Alexander G. Kvashnin
Abstract:
Synthesis of high-entropy carbides (HEC) requires high temperatures that can be provided by electric arc plasma method. However, the formation temperature of a single-phase sample remains unknown. Moreover, under some temperatures multi-phase structures can emerge. In this work we developed an approach for a controllable synthesis of HEC TiZrNbHfTaC5 based on theoretical and experimental technique…
▽ More
Synthesis of high-entropy carbides (HEC) requires high temperatures that can be provided by electric arc plasma method. However, the formation temperature of a single-phase sample remains unknown. Moreover, under some temperatures multi-phase structures can emerge. In this work we developed an approach for a controllable synthesis of HEC TiZrNbHfTaC5 based on theoretical and experimental techniques. We used canonical Monte Carlo (CMC) simulations with the machine learning interatomic potentials to determine the temperature conditions for the formation of single-phase and multi-phase samples. In full agreement with the theory, the single-phase sample, produced with electric arc discharge, was observed at 2000 K. Below 1200 K the sample decomposed into (Ti-Nb-Ta)C and a mixture of (Zr-Hf-Ta)C, (Zr-Nb-Hf)C, (Zr-Nb)C, and (Zr-Ta)C. Our results demonstrate the conditions for the formation of HEC and we anticipate that our approach can pave the way towards targeted synthesis of multicomponent materials.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Modelling Surface Segregation in Compositionally Complex Alloys with Ab-Initio Accuracy
Authors:
Alberto Ferrari,
Vadim Sotskov,
Alexander V. Shapeev,
Fritz Körmann
Abstract:
Compositionally complex alloys or concentrated solid solutions are the latest frontier in catalyst design, but mixing different elements in one catalyst may result in surface segregation. Atomistic simulations can predict segregation patterns, but standard approaches based on mean-field models, cluster expansion, or classical interatomic potentials are often limited for the description of multicom…
▽ More
Compositionally complex alloys or concentrated solid solutions are the latest frontier in catalyst design, but mixing different elements in one catalyst may result in surface segregation. Atomistic simulations can predict segregation patterns, but standard approaches based on mean-field models, cluster expansion, or classical interatomic potentials are often limited for the description of multicomponent alloys. We present machine learning potentials that can describe surface segregation with near DFT accuracy. The method is used to study a complex Co-Cu-Fe-Mo-Ni quinary alloy. For this alloy, an unexpected segregation of Co, which has a relatively high surface energy, is observed. We rationalize this surprising mechanism in terms of simple transition-metal chemistry.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
AI-accelerated Materials Informatics Method for the Discovery of Ductile Alloys
Authors:
Ivan Novikov,
Olga Kovalyova,
Alexander Shapeev,
Max Hodapp
Abstract:
In computational materials science, a common means for predicting macroscopic (e.g., mechanical) properties of an alloy is to define a model using combinations of descriptors that depend on some material properties (elastic constants, misfit volumes, etc.), representative for the macroscopic behavior. The material properties are usually computed using special quasi-random structures (SQSs), in tan…
▽ More
In computational materials science, a common means for predicting macroscopic (e.g., mechanical) properties of an alloy is to define a model using combinations of descriptors that depend on some material properties (elastic constants, misfit volumes, etc.), representative for the macroscopic behavior. The material properties are usually computed using special quasi-random structures (SQSs), in tandem with density functional theory (DFT). However, DFT scales cubically with the number of atoms and is thus impractical for a screening over many alloy compositions.
Here, we present a novel methodology which combines modeling approaches and machine-learning interatomic potentials. Machine-learning interatomic potentials are orders of magnitude faster than DFT, while achieving similar accuracy, allowing for a predictive and tractable high-throughput screening over the whole alloy space. The proposed methodology is illustrated by predicting the room temperature ductility of the medium-entropy alloy Mo-Nb-Ta.
△ Less
Submitted 14 October, 2022;
originally announced October 2022.
-
Mechanical, optical, and thermoelectric properties of semiconducting ZnIn2X4 (X= S, Se, Te) monolayers
Authors:
Mohammad Ali Mohebpour,
Bohayra Mortazavi,
Timon Rabczuk,
Xiaoying Zhuang,
Alexander V. Shapeev,
Meysam Bagheri Tagani
Abstract:
Mechanical stability of the ZnIn2X4 monolayers. The ZnIn2S4 and ZnIn2Se4 are semiconductors with direct band gaps of 3.94 and 2.77 eV, respectively whereas the ZnIn2Te4 shows an indirect band gap of 1.84 eV at the G0W0 level. The optical properties achieved from the solution of the Bethe-Salpeter equation predict the exciton binding energy of the ZnIn2S4, ZnIn2Se4, and ZnIn2Te4 monolayers to be 0.…
▽ More
Mechanical stability of the ZnIn2X4 monolayers. The ZnIn2S4 and ZnIn2Se4 are semiconductors with direct band gaps of 3.94 and 2.77 eV, respectively whereas the ZnIn2Te4 shows an indirect band gap of 1.84 eV at the G0W0 level. The optical properties achieved from the solution of the Bethe-Salpeter equation predict the exciton binding energy of the ZnIn2S4, ZnIn2Se4, and ZnIn2Te4 monolayers to be 0.51, 0.41, and 0.34 eV, respectively, suggesting the high stability of the excitonic states against thermal dissociation. Using the iterative solutions of the Boltzmann transport equation accelerated by machine learning interatomic potentials, the room-temperature lattice thermal conductivity of the ZnIn2S4, ZnIn2Se4, and ZnIn2Te4 monolayers is predicted to be remarkably low as 5.8, 2.0, and 0.4 W/mK, respectively. Due to the low lattice thermal conductivity, high thermopower, and large figure of merit, we propose the ZnIn2Se4 and ZnIn2Te4 monolayers as promising candidates for thermoelectric energy conversion systems. This study provides an extensive vision concerning the intrinsic physical properties of the ZnIn2X4 nanosheets and highlights their characteristics for energy conversion and optoelectronics applications.
△ Less
Submitted 26 February, 2022;
originally announced February 2022.
-
Automated optimization of convergence parameters in plane wave density functional theory calculations via a tensor decomposition-based uncertainty quantification
Authors:
Jan Janssen,
Edgar Makarov,
Tilmann Hickel,
Alexander V. Shapeev,
Jörg Neugebauer
Abstract:
First principles approaches have revolutionized our ability in using computers to predict, explore and design materials. A major advantage commonly associated with these approaches is that they are fully parameter free. However, numerically solving the underlying equations requires to choose a set of convergence parameters. With the advent of high-throughput calculations it becomes exceedingly imp…
▽ More
First principles approaches have revolutionized our ability in using computers to predict, explore and design materials. A major advantage commonly associated with these approaches is that they are fully parameter free. However, numerically solving the underlying equations requires to choose a set of convergence parameters. With the advent of high-throughput calculations it becomes exceedingly important to achieve a truly parameter free approach. Utilizing uncertainty quantification (UQ) and tensor decomposition we derive a numerically highly efficient representation of the statistical and systematic error in the multidimensional space of the convergence parameters. Based on this formalism we implement a fully automated approach that requires as input the target accuracy rather than convergence parameters. The performance and robustness of the approach are shown by applying it to a large set of elements crystallizing in a cubic fcc lattice.
△ Less
Submitted 7 December, 2021;
originally announced December 2021.
-
Exploring thermal expansion of carbon-based nanosheets by machine-learning interatomic potentials
Authors:
Bohayra Mortazavi,
Ali Rajabpour,
Xiaoying Zhuang,
Timon Rabczuk,
Alexander V. Shapeev
Abstract:
Examination of thermal expansion of two-dimensional (2D) nanomaterials is a challenging theoretical task with either ab-initio or classical molecular dynamics simulations. In this regard, while ab-initio molecular dynamics (AIMD) simulations offer extremely accurate predictions, but they are excessively demanding from computational point of view. On the other side, classical molecular dynamics sim…
▽ More
Examination of thermal expansion of two-dimensional (2D) nanomaterials is a challenging theoretical task with either ab-initio or classical molecular dynamics simulations. In this regard, while ab-initio molecular dynamics (AIMD) simulations offer extremely accurate predictions, but they are excessively demanding from computational point of view. On the other side, classical molecular dynamics simulations can be conducted with affordable computational costs, but without predictive accuracy needed to study novel materials and compositions. Herein, we explore the thermal expansion of several carbon-based nanosheets on the basis of machine-learning interatomic potentials (MLIPs). We show that passively trained MLIPs over inexpensive AIMD trajectories enable the examination of thermal expansion of complex nanomembranes over wide range of temperatures. Passively fitted MLIPs could also with outstanding accuracy reproduce the phonon dispersion relations predicted by density functional theory calculations. Our results highlight that the devised methodology on the basis of passively trained MLIPs is computationally efficient and versatile to accurately examine the thermal expansion of complex and novel materials and compositions using the molecular dynamics simulations.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Validation of moment tensor potentials for fcc and bcc metals using EXAFS spectra
Authors:
Alexander V. Shapeev,
Dmitry Bocharov,
Alexei Kuzmin
Abstract:
Machine-learning potentials for materials, namely the moment tensor potentials (MTPs), were validated using experimental EXAFS spectra for the first time. The MTPs for four metals (bcc W and Mo, fcc Cu and Ni) were obtained by the active learning algorithm of fitting to the results of the calculations using density functional theory (DFT). The MTP accuracy was assessed by comparing metal K-edge EX…
▽ More
Machine-learning potentials for materials, namely the moment tensor potentials (MTPs), were validated using experimental EXAFS spectra for the first time. The MTPs for four metals (bcc W and Mo, fcc Cu and Ni) were obtained by the active learning algorithm of fitting to the results of the calculations using density functional theory (DFT). The MTP accuracy was assessed by comparing metal K-edge EXAFS spectra obtained experimentally and computed from the results of molecular dynamics (MD) simulations. The sensitivity of the method to various aspects of the MD and DFT models was demonstrated using Ni as an example. Good agreement was found for W, Mo and Cu using the recommended PAW pseudopotentials, whereas a more accurate pseudopotential with 18 valence electrons was required for Ni to achieve a similar agreement. The use of EXAFS spectra allows one to estimate the MTP ability in reproducing both average and dynamic atomic structures.
△ Less
Submitted 11 August, 2021;
originally announced August 2021.
-
Machine-learning potentials enable predictive $\textit{and}$ tractable high-throughput screening of random alloys
Authors:
Max Hodapp,
Alexander Shapeev
Abstract:
We present an automated procedure for computing stacking fault energies in random alloys from large-scale simulations using moment tensor potentials (MTPs) with the accuracy of density functional theory (DFT). To that end, we develop an algorithm for training MTPs on random alloys. In the first step, our algorithm constructs a set of ~10000 or more training candidate configurations with 50-100 ato…
▽ More
We present an automated procedure for computing stacking fault energies in random alloys from large-scale simulations using moment tensor potentials (MTPs) with the accuracy of density functional theory (DFT). To that end, we develop an algorithm for training MTPs on random alloys. In the first step, our algorithm constructs a set of ~10000 or more training candidate configurations with 50-100 atoms that are representative for the atomic neighborhoods occurring in the large-scale simulation. In the second step, we use active learning to reduce this set to ~100 most distinct configurations - for which DFT energies and forces are computed and on which the potential is ultimately trained. We validate our algorithm for the MoNbTa medium-entropy alloy by showing that the MTP reproduces the DFT $\frac{1}{4}[111]$ unstable stacking fault energy over the entire compositional space up to a few percent.
Contrary to state-of-the-art methods, e.g., the coherent potential approximation (CPA) or special quasi-random structures (SQSs), our algorithm naturally accounts for relaxation, is not limited by DFT cell sizes, and opens opportunities to efficiently investigate follow-up problems, such as chemical ordering. In a broader sense, our algorithm can be easily modified to compute related properties of random alloys, for instance, misfit volumes, or grain boundary energies. Moreover, it forms the basis for an efficient construction of MTPs to be used in large-scale simulations of multicomponent systems.
△ Less
Submitted 19 October, 2021; v1 submitted 12 July, 2021;
originally announced July 2021.
-
Bayesian learning of thermodynamic integration and numerical convergence for accurate phase diagrams
Authors:
V. Ladygin,
I. Beniya,
E. Makarov,
A. Shapeev
Abstract:
Accurate phase diagram calculation from molecular dynamics requires systematic treatment and convergence of statistical averages. In this work we propose a Gaussian process regression based framework for reconstructing the free energy functions using data of various origin. Our framework allows for propagating statistical uncertainty from finite molecular dynamics trajectories to the phase diagram…
▽ More
Accurate phase diagram calculation from molecular dynamics requires systematic treatment and convergence of statistical averages. In this work we propose a Gaussian process regression based framework for reconstructing the free energy functions using data of various origin. Our framework allows for propagating statistical uncertainty from finite molecular dynamics trajectories to the phase diagram and automatically performing convergence with respect to simulation parameters. Furthermore, our approach provides a way for automatic optimal sampling in the simulation parameter space based on Bayesian optimization approach. We validate our methodology by constructing phase diagrams of two model systems, the Lennard-Jones and soft-core potential, and compare the results with existing works studies and our coexistence simulations. Finally, we construct the phase diagram of lithium at temperatures above 300 K and pressures below 30 GPa from a machine-learning potential trained on ab initio data. Our approach performs well when compared to coexistence simulations and experimental results.
△ Less
Submitted 1 November, 2021; v1 submitted 19 April, 2021;
originally announced April 2021.
-
Free energy of (CoxMn1-x)3O4 mixed phases from machine-learning-enhanced ab initio calculations
Authors:
Suzanne K. Wallace,
Anton S. Bochkarev,
Ambroise van Roekeghem,
Javier Carrasco,
Alexander Shapeev,
Natalio Mingo
Abstract:
(CoxMn1-x)3O4 is a promising candidate material for solar thermochemical energy storage. A high-temperature model for this system would provide a valuable tool for evaluating its potential. However, predicting phase diagrams of complex systems with ab initio calculations is challenging due to the varied sources affecting the free energy, and with the prohibitive amount of configurations needed in…
▽ More
(CoxMn1-x)3O4 is a promising candidate material for solar thermochemical energy storage. A high-temperature model for this system would provide a valuable tool for evaluating its potential. However, predicting phase diagrams of complex systems with ab initio calculations is challenging due to the varied sources affecting the free energy, and with the prohibitive amount of configurations needed in the configurational entropy calculation. In this work, we compare three different machine learning (ML) approaches for sampling the configuration space of (CoxMn1-x)3O4, including a simpler ML approach, which would be suitable for application in high-throughput studies. We use experimental data for a feature of the phase diagram to assess the accuracy of model predictions. We find that with some methods, data pre-treatment is needed to obtain accurate predictions due to inherently composition-imbalanced training data for a mixed phase. We highlight that the important entropy contributions depend on the physical regimes of the system under investigation and that energy predictions with ML models are more challenging at compositions where there are energetically competing ground state crystal structures. Similar methods to those outlined here can be used to screen other candidate materials for thermochemical energy storage
△ Less
Submitted 6 March, 2021;
originally announced March 2021.
-
Exceptional piezoelectricity, high thermal conductivity and stiffness and promising photocatalysis in two-dimensional MoSi2N4 family confirmed by first-principles
Authors:
Bohayra Mortazavi,
Brahmanandam Javvaji,
Fazel Shojaei,
Timon Rabczuk,
Alexander V. Shapeev,
Xiaoying Zhuang
Abstract:
Chemical vapor deposition has been most recently employed to fabricate centimeter-scale high-quality single-layer MoSi2N4 (Science; 2020;369; 670). Motivated by this exciting experimental advance, herein we conduct extensive first-principles based simulations to explore the stability, mechanical properties, lattice thermal conductivity, piezoelectric and flexoelectric response, and photocatalytic…
▽ More
Chemical vapor deposition has been most recently employed to fabricate centimeter-scale high-quality single-layer MoSi2N4 (Science; 2020;369; 670). Motivated by this exciting experimental advance, herein we conduct extensive first-principles based simulations to explore the stability, mechanical properties, lattice thermal conductivity, piezoelectric and flexoelectric response, and photocatalytic and electronic features of MA2Z4 (M = Cr, Mo, W; A = Si, Ge; Z = N, P) monolayers. The considered nanosheets are found to exhibit dynamical stability and remarkably high mechanical properties. Moreover, they show diverse electronic properties from antiferromagnetic metal to half metal and to semiconductors with band gaps ranging from 0.31 to 2.57 eV. Among the studied nanosheets, the MoSi2N4 and WSi2N4 monolayers yield appropriate band edge positions, high electron and hole mobilities, and strong visible light absorption, highly promising for applications in optoelectronics and photocatalytic water splitting. The MoSi2N4 and WSi2N4 monolayers are also predicted to show outstandingly high lattice thermal conductivity of 440 and 500 W/mK, respectively. For the first time we show that machine learning interatomic potentials trained over small supercells can be employed to examine the flexoelectric and piezoelectric properties of complex structures. As the most exciting finding, WSi2N4, CrSi2N4 and MoSi2N4 are found to exhibit the highest piezoelectric coefficients, outperforming all other-known 2D materials. Our results highlight that MA2Z4 nanosheets not only undoubtedly outperform the transition metal dichalcogenides family but also can compete with graphene for applications in nanoelectronics, optoelectronic, energy storage/conversion and thermal management systems.
△ Less
Submitted 29 December, 2020;
originally announced December 2020.
-
Accelerating first-principles estimation of thermal conductivity by machine-learning interatomic potentials: A MTP/ShengBTE solution
Authors:
Bohayra Mortazavi,
Evgeny P. Podryabinkin,
Ivan S. Nvikovb,
Timon Rabczuk,
Xiaoying Zhuang,
Alexander V. Shapeev
Abstract:
Accurate evaluation of the thermal conductivity of a material can be a challenging task from both experimental and theoretical points of view. In particular for the nanostructured materials, the experimental measurement of thermal conductivity is associated with diverse sources of uncertainty. As a viable alternative to experiment, the combination of density functional theory (DFT) simulations and…
▽ More
Accurate evaluation of the thermal conductivity of a material can be a challenging task from both experimental and theoretical points of view. In particular for the nanostructured materials, the experimental measurement of thermal conductivity is associated with diverse sources of uncertainty. As a viable alternative to experiment, the combination of density functional theory (DFT) simulations and the solution of Boltzmann transport equation is currently considered as the most trusted approach to examine thermal conductivity. The main bottleneck of the aforementioned method is to acquire the anharmonic interatomic force constants using the computationally demanding DFT calculations. In this work we propose a substantially accelerated approach for the evaluation of anharmonic interatomic force constants via employing machine-learning interatomic potentials (MLIPs) trained over short ab-initio molecular dynamics trajectories. The remarkable accuracy of the proposed accelerated method is confirmed by comparing the estimated thermal conductivities of several bulk and two-dimensional materials with those computed by the full-DFT approach. The MLIP-based method proposed in this study can be employed as a standard tool, which would substantially accelerate and facilitate the estimation of lattice thermal conductivity in comparison with the commonly used full-DFT solution.
△ Less
Submitted 6 September, 2020;
originally announced September 2020.
-
The MLIP package: Moment Tensor Potentials with MPI and Active Learning
Authors:
Ivan S. Novikov,
Konstantin Gubaev,
Evgeny V. Podryabinkin,
Alexander V. Shapeev
Abstract:
The subject of this paper is the technology (the "how") of constructing machine-learning interatomic potentials, rather than science (the "what" and "why") of atomistic simulations using machine-learning potentials. Namely, we illustrate how to construct moment tensor potentials using active learning as implemented in the MLIP package, focusing on the efficient ways to sample configurations for th…
▽ More
The subject of this paper is the technology (the "how") of constructing machine-learning interatomic potentials, rather than science (the "what" and "why") of atomistic simulations using machine-learning potentials. Namely, we illustrate how to construct moment tensor potentials using active learning as implemented in the MLIP package, focusing on the efficient ways to sample configurations for the training set, how expanding the training set changes the error of predictions, how to set up ab initio calculations in a cost-effective manner, etc. The MLIP package (short for Machine-Learning Interatomic Potentials) is available at https://mlip.skoltech.ru/download/.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
Machine-Learning Interatomic Potentials Enable First-Principles Multiscale Modeling of Lattice Thermal Conductivity in Graphene/Borophene Heterostructures
Authors:
Bohayra Mortazavi,
Evgeny V. Podryabinkin,
Stephan Roche,
Timon Rabczuk,
Xiaoying Zhuang,
Alexander V. Shapeev
Abstract:
One of the ultimate goals of computational modeling in condensed matter is to be able to accurately compute materials properties with minimal empirical information. First-principles approaches such as the density functional theory (DFT) provide the best possible accuracy on electronic properties but they are limited to systems up to a few hundreds, or at most thousands of atoms. On the other hand,…
▽ More
One of the ultimate goals of computational modeling in condensed matter is to be able to accurately compute materials properties with minimal empirical information. First-principles approaches such as the density functional theory (DFT) provide the best possible accuracy on electronic properties but they are limited to systems up to a few hundreds, or at most thousands of atoms. On the other hand, classical molecular dynamics (CMD) simulations and finite element method (FEM) are extensively employed to study larger and more realistic systems, but conversely depend on empirical information. Here, we show that machine-learning interatomic potentials (MLIPs) trained over short ab-initio molecular dynamics trajectories enable first-principles multiscale modeling, in which DFT simulations can be hierarchically bridged to efficiently simulate macroscopic structures. As a case study, we analyze the lattice thermal conductivity of coplanar graphene/borophene heterostructures, recently synthesized experimentally (Sci. Adv. 2019; 5: eaax6444), for which no viable classical modeling alternative is presently available. Our MLIP-based approach can efficiently predict the lattice thermal conductivity of graphene and borophene pristine phases, the thermal conductance of complex graphene/borophene interfaces and subsequently enable the study of effective thermal transport along the heterostructures at continuum level. This work highlights that MLIPs can be effectively and conveniently employed to enable first-principles multiscale modeling via hierarchical employment of DFT/CMD/FEM simulations, thus expanding the capability for computational design of novel nanostructures.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
High thermal conductivity in semiconducting Janus and non-Janus diamanes
Authors:
Mostafa Raeisi,
Bohayra Mortazavi,
Evgeny V. Podryabinkin,
Fazel Shojaei,
Xiaoying Zhuang,
Alexander V. Shapeev
Abstract:
Most recently, F-diamane monolayer was experimentally realized by the fluorination of bilayer graphene. In this work we elaborately explore the electronic and thermal conductivity responses of diamane lattices with homo or hetero functional groups, including: non-Janus C2H, C2F and C2Cl diamane and Janus counterparts of C4HF, C4HCl and C4FCl. Noticeably, C2H, C2F, C2Cl, C4HF, C4HCl and C4FCl diama…
▽ More
Most recently, F-diamane monolayer was experimentally realized by the fluorination of bilayer graphene. In this work we elaborately explore the electronic and thermal conductivity responses of diamane lattices with homo or hetero functional groups, including: non-Janus C2H, C2F and C2Cl diamane and Janus counterparts of C4HF, C4HCl and C4FCl. Noticeably, C2H, C2F, C2Cl, C4HF, C4HCl and C4FCl diamanes are found to show electronic diverse band gaps of, 3.86, 5.68, 2.42, 4.17, 0.86, and 2.05 eV, on the basis of HSE06 method estimations. The thermal conductivity of diamane nanosheets was acquired using the full iterative solutions of the Boltzmann transport equation, with substantially accelerated calculations by employing machine-learning interatomic potentials in obtaining the anharmonic force constants. According to our results, the room temperature lattice thermal conductivity of graphene and C2H, C2F, C2Cl, C4HF, C4HCl and C4FCl diamane monolayers are estimated to be 3636, 1145, 377, 146, 454, 244 and 196 W/mK, respectively. The underlying mechanisms resulting in significant effects of functional groups on the thermal conductivity of diamane nanosheets were thoroughly explored. Our results highlight the substantial role of functional groups on the electronic and thermal conduction responses of diamane nanosheets.
△ Less
Submitted 7 June, 2020;
originally announced June 2020.
-
Nanoporous C3N4, C3N5 and C3N6 nanosheets; Novel strong semiconductors with low thermal conductivities and appealing optical/electronic properties
Authors:
Bohayra Mortazavi,
Fazel Shojaei,
Masoud Shahrokhi,
Maryam Azizi,
Timon Rabczuk,
Alexander V. Shapeev,
Xiaoying Zhuang
Abstract:
Carbon nitride two-dimensional (2D) materials are among the most attractive class of nanomaterials, with wide range of application prospects. As a continuous progress, most recently, two novel carbon nitride 2D lattices of C3N5 and C3N4 have been successfully experimentally realized. Motivated by these latest accomplishments and also by taking into account the well-known C3N4 triazine-based graphi…
▽ More
Carbon nitride two-dimensional (2D) materials are among the most attractive class of nanomaterials, with wide range of application prospects. As a continuous progress, most recently, two novel carbon nitride 2D lattices of C3N5 and C3N4 have been successfully experimentally realized. Motivated by these latest accomplishments and also by taking into account the well-known C3N4 triazine-based graphitic carbon nitride structures, we predicted two novel C3N6 and C3N4 counterparts. We then conducted extensive density functional theory simulations to explore the thermal stability, mechanical, electronic and optical properties of these novel nanoporous carbon-nitride nanosheets. According to our results all studied nanosheets were found to exhibit desirable thermal stability and mechanical properties. Non-equilibrium molecular dynamics simulations on the basis of machine learning interatomic potentials predict ultralow thermal conductivities for these novel nanosheets. Electronic structure analyses confirm direct band gap semiconducting electronic character and optical calculations reveal the ability of these novel 2D systems to adsorb visible range of light. Extensive first-principles based results by this study provide a comprehensive vision on the stability, mechanical, electronic and optical responses of C3N4, C3N5 and C3N6 as novel 2D semiconductors and suggest them as promising candidates for the design of advanced nanoelectronics and energy storage/conversion systems.
△ Less
Submitted 6 June, 2020;
originally announced June 2020.
-
Exploring Phononic Properties of Two-Dimensional Materials using Machine Learning Interatomic Potentials
Authors:
Bohayra Mortazavi,
Ivan S. Novikov,
Evgeny V. Podryabinkin,
Stephan Roche,
Timon Rabczuk,
Alexander V. Shapeev,
Xiaoying Zhuang
Abstract:
Phononic properties are commonly studied by calculating force constants using the density functional theory (DFT) simulations. Although DFT simulations offer accurate estimations of phonon dispersion relations or thermal properties, but for low-symmetry and nanoporous structures the computational cost quickly becomes very demanding. Moreover, the computational setups may yield nonphysical imaginar…
▽ More
Phononic properties are commonly studied by calculating force constants using the density functional theory (DFT) simulations. Although DFT simulations offer accurate estimations of phonon dispersion relations or thermal properties, but for low-symmetry and nanoporous structures the computational cost quickly becomes very demanding. Moreover, the computational setups may yield nonphysical imaginary frequencies in the phonon dispersion curves, impeding the assessment of phononic properties and the dynamical stability of the considered system. Here, we compute phonon dispersion relations and examine the dynamical stability of a large ensemble of novel materials and compositions. We propose a fast and convenient alternative to DFT simulations which derived from machine-learning interatomic potentials passively trained over computationally efficient ab-initio molecular dynamics trajectories. Our results for diverse two-dimensional (2D) nanomaterials confirm that the proposed computational strategy can reproduce fundamental thermal properties in close agreement with those obtained via the DFT approach. The presented method offers a stable, efficient, and convenient solution for the examination of dynamical stability and exploring the phononic properties of low-symmetry and porous 2D materials.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Elinvar effect in $β-$Ti simulated by on-the-fly trained moment tensor potential
Authors:
Alexander V. Shapeev,
Evgeny V. Podryabinkin,
Konstantin Gubaev,
Ferenc Tasnádi,
Igor A. Abrikosov
Abstract:
A combination of quantum mechanics calculations with machine learning (ML) techniques can lead to a paradigm shift in our ability to predict materials properties from first principles. Here we show that on-the-fly training of an interatomic potential described through moment tensors provides the same accuracy as state-of-the-art {\it ab inito} molecular dynamics in predicting high-temperature elas…
▽ More
A combination of quantum mechanics calculations with machine learning (ML) techniques can lead to a paradigm shift in our ability to predict materials properties from first principles. Here we show that on-the-fly training of an interatomic potential described through moment tensors provides the same accuracy as state-of-the-art {\it ab inito} molecular dynamics in predicting high-temperature elastic properties of materials with two orders of magnitude less computational effort. Using the technique, we investigate high-temperature bcc phase of titanium and predict very weak, Elinvar, temperature dependence of its elastic moduli, similar to the behavior of the so-called GUM Ti-based alloys [T. Sato {\ it et al.}, Science {\bf 300}, 464 (2003)]. Given the fact that GUM alloys have complex chemical compositions and operate at room temperature, Elinvar properties of elemental bcc-Ti observed in the wide temperature interval 1100--1700 K is unique.
△ Less
Submitted 9 May, 2020;
originally announced May 2020.
-
In operando active learning of interatomic interaction during large-scale simulations
Authors:
Max Hodapp,
Alexander Shapeev
Abstract:
A well-known drawback of state-of-the-art machine-learning interatomic potentials is their poor ability to extrapolate beyond the training domain. For small-scale problems with tens to hundreds of atoms this can be solved by using active learning which is able to select atomic configurations on which a potential attempts extrapolation and add them to the ab initio-computed training set. In this se…
▽ More
A well-known drawback of state-of-the-art machine-learning interatomic potentials is their poor ability to extrapolate beyond the training domain. For small-scale problems with tens to hundreds of atoms this can be solved by using active learning which is able to select atomic configurations on which a potential attempts extrapolation and add them to the ab initio-computed training set. In this sense an active learning algorithm can be viewed as an on-the-fly interpolation of an ab initio model. For large-scale problems, possibly involving tens of thousands of atoms, this is not feasible because one cannot afford even a single density functional theory computation with such a large number of atoms.
This work marks a new milestone toward fully automatic ab initio-accurate large-scale atomistic simulations. We develop an active learning algorithm that identifies local subregions of the simulation region where the potential extrapolates. Then the algorithm constructs periodic configurations out of these local, non-periodic subregions, sufficiently small to be computable with plane-wave density functional theory codes, in order to obtain accurate ab initio energies. We benchmark our algorithm on the problem of the screw dislocation motion in bcc tungsten and show that our algorithm reaches ab initio accuracy, down to typical magnitudes of numerical noise in DFT codes. We show that our algorithm reproduces material properties such as core structure, Peierls barrier, and Peierls stress. This unleashes new capabilities for computational materials science toward applications which have currently been out of scope if approached solely by ab initio methods.
△ Less
Submitted 21 September, 2020; v1 submitted 27 April, 2020;
originally announced April 2020.
-
Ab initio analysis of some Ge-based 2D nanomaterials
Authors:
Ali Ghojavand,
S. Javad Hashemifar,
Mahdi Tarighi Ahmadpour,
Alexander V. Shapeev,
Amir Alhaji,
Qaem Hassanzada
Abstract:
The structural, electronic and dynamical properties of a group of 2D germanium-based compounds, including GeC, GeN, GeO, GeSi, GeS, GeSe, and germanene, are investigated by employing first-principles calculations. The most stable structure of each of these systems is identified after considering the most probable configurations and performing accurate phonon calculations. We introduce a new phase…
▽ More
The structural, electronic and dynamical properties of a group of 2D germanium-based compounds, including GeC, GeN, GeO, GeSi, GeS, GeSe, and germanene, are investigated by employing first-principles calculations. The most stable structure of each of these systems is identified after considering the most probable configurations and performing accurate phonon calculations. We introduce a new phase of germanene, which we name the tile germanene, which is significantly more stable than the known hexagonal germanene. We apply the modern modified Becke-Johnson (mBJ) and DFT1/2 schemes to obtain an accurate band structure for our selected 2D materials. It is seen that GeO and GeC exhibit the highest band gaps of more than 3 eV in this group of materials. Moreover, we argue that, in contrast to the semi-metallic nature of hexagonal germanene, the tile germanene is a very good conductor. The band edges of our semiconducting 2D materials are accurately aligned to the vacuum level to address the potential photocatalytic application of this system for water splitting and carbon dioxide reduction. The optical properties, including dielectric functions, refractive index, reflectivity, and Loss function of the samples are investigated in the framework of the Bethe-Salpeter approach.
△ Less
Submitted 23 January, 2020; v1 submitted 21 January, 2020;
originally announced January 2020.
-
Prediction of C7N6 and C9N4: Stable and strong porous carbon-nitride nanosheets with attractive electronic and optical properties
Authors:
Bohayra Mortazavi,
Masoud Shahrokhi,
Alexander V Shapeev,
Timon Rabczuk,
Xiaoying Zhuang
Abstract:
In this work, three novel porous carbon-nitride nanosheets with C7N6, C9N4 and C10N3 stoichiometries are predicted. First-principles simulations were accordingly employed to evaluate stability and explore the mechanical, electronic and optical properties. Phonon dispersions confirm the dynamical stability of all predicted nanosheets. Nonetheless, ab-initio molecular dynamics results indicate that…
▽ More
In this work, three novel porous carbon-nitride nanosheets with C7N6, C9N4 and C10N3 stoichiometries are predicted. First-principles simulations were accordingly employed to evaluate stability and explore the mechanical, electronic and optical properties. Phonon dispersions confirm the dynamical stability of all predicted nanosheets. Nonetheless, ab-initio molecular dynamics results indicate that only C7N6 and C9N4 are thermally stable. C7N6, C9N4 and C10N3 nanosheets were predicted to exhibit high elastic modulus of 212, 202 and 208 N/m and maximum tensile strengths of 14.1, 22.4 and 15.8 N/m, respectively. C7N6 monolayer was confirmed to be a direct band-gap semiconductor, with a 2.25 eV gap according to the HSE06 method estimation. Interestingly, C9N4 and C10N3 monolayers show metallic character. The first absorption peaks of optical spectra reveal that C7N6 nanosheet can absorb the visible light, whereas C9N4 and C10N3 monolayers can absorb the Infrared range of light. Moreover, the absorption coefficient and optical conductivity of predicted nanosheets in the visible range of light are larger than those of the graphene. The results provided by this study confirm the stability and highlight very promising properties of C7N6 and C9N4 nanosheets, which may serve as promising candidates for numerous advanced technologies.
△ Less
Submitted 16 August, 2019; v1 submitted 8 August, 2019;
originally announced August 2019.
-
A Performance and Cost Assessment of Machine Learning Interatomic Potentials
Authors:
Yunxing Zuo,
Chi Chen,
Xiangguo Li,
Zhi Deng,
Yiming Chen,
Jörg Behler,
Gábor Csányi,
Alexander V. Shapeev,
Aidan P. Thompson,
Mitchell A. Wood,
Shyue ** Ong
Abstract:
Machine learning of the quantitative relationship between local environment descriptors and the potential energy surface of a system of atoms has emerged as a new frontier in the development of interatomic potentials (IAPs). Here, we present a comprehensive evaluation of ML-IAPs based on four local environment descriptors --- Behler-Parrinello symmetry functions, smooth overlap of atomic positions…
▽ More
Machine learning of the quantitative relationship between local environment descriptors and the potential energy surface of a system of atoms has emerged as a new frontier in the development of interatomic potentials (IAPs). Here, we present a comprehensive evaluation of ML-IAPs based on four local environment descriptors --- Behler-Parrinello symmetry functions, smooth overlap of atomic positions (SOAP), the Spectral Neighbor Analysis Potential (SNAP) bispectrum components, and moment tensors --- using a diverse data set generated using high-throughput density functional theory (DFT) calculations. The data set comprising bcc (Li, Mo) and fcc (Cu, Ni) metals and diamond group IV semiconductors (Si, Ge) is chosen to span a range of crystal structures and bonding. All descriptors studied show excellent performance in predicting energies and forces far surpassing that of classical IAPs, as well as predicting properties such as elastic constants and phonon dispersion curves. We observe a general trade-off between accuracy and the degrees of freedom of each model, and consequently computational cost. We will discuss these trade-offs in the context of model selection for molecular dynamics and other applications.
△ Less
Submitted 24 July, 2019; v1 submitted 20 June, 2019;
originally announced June 2019.
-
Machine-learned Interatomic Potentials for Alloys and Alloy Phase Diagrams
Authors:
Conrad W. Rosenbrock,
Konstantin Gubaev,
Alexander V. Shapeev,
Livia B. Pártay,
Noam Bernstein,
Gábor Csányi,
Gus L. W. Hart
Abstract:
We introduce machine-learned potentials for Ag-Pd to describe the energy of alloy configurations over a wide range of compositions. We compare two different approaches. Moment tensor potentials (MTP) are polynomial-like functions of interatomic distances and angles. The Gaussian Approximation Potential (GAP) framework uses kernel regression, and we use the Smooth Overlap of Atomic Positions (SOAP)…
▽ More
We introduce machine-learned potentials for Ag-Pd to describe the energy of alloy configurations over a wide range of compositions. We compare two different approaches. Moment tensor potentials (MTP) are polynomial-like functions of interatomic distances and angles. The Gaussian Approximation Potential (GAP) framework uses kernel regression, and we use the Smooth Overlap of Atomic Positions (SOAP) representation of atomic neighbourhoods that consists of a complete set of rotational and permutational invariants provided by the power spectrum of the spherical Fourier transform of the neighbour density. Both types of potentials give excellent accuracy for a wide range of compositions and rival the accuracy of cluster expansion, a benchmark for this system. While both models are able to describe small deformations away from the lattice positions, SOAP-GAP excels at transferability as shown by sensible transformation paths between configurations, and MTP allows, due to its lower computational cost, the calculation of compositional phase diagrams. Given the fact that both methods perform as well as cluster expansion would but yield off-lattice models, we expect them to open new avenues in computational materials modeling for alloys.
△ Less
Submitted 9 July, 2019; v1 submitted 18 June, 2019;
originally announced June 2019.
-
Ab initio vibrational free energies including anharmonicity for multicomponent alloys
Authors:
Blazej Grabowski,
Yuji Ikeda,
Fritz Körmann,
Christoph Freysoldt,
Andrew Ian Duff,
Alexander Shapeev,
Jörg Neugebauer
Abstract:
A density-functional-theory based approach to efficiently compute numerically exact vibrational free energies - including anharmonicity - for chemically complex multicomponent alloys is developed. It is based on a combination of thermodynamic integration and a machine-learning potential. We demonstrate the performance of the approach by computing the anharmonic free energy of the prototypical five…
▽ More
A density-functional-theory based approach to efficiently compute numerically exact vibrational free energies - including anharmonicity - for chemically complex multicomponent alloys is developed. It is based on a combination of thermodynamic integration and a machine-learning potential. We demonstrate the performance of the approach by computing the anharmonic free energy of the prototypical five-component VNbMoTaW refractory high entropy alloy.
△ Less
Submitted 28 February, 2019;
originally announced February 2019.
-
Impact of lattice relaxations on phase transitions in a high-entropy alloy studied by machine-learning potentials
Authors:
Tatiana Kostiuchenko,
Fritz Körmann,
Jörg Neugebauer,
Alexander Shapeev
Abstract:
Recently, high-entropy alloys (HEAs) have attracted wide attention due to their extraordinary materials properties. A main challenge in identifying new HEAs is the lack of efficient approaches for exploring their huge compositional space. Ab initio calculations have emerged as a powerful approach that complements experiment. However, for multicomponent alloys existing approaches suffer from the ch…
▽ More
Recently, high-entropy alloys (HEAs) have attracted wide attention due to their extraordinary materials properties. A main challenge in identifying new HEAs is the lack of efficient approaches for exploring their huge compositional space. Ab initio calculations have emerged as a powerful approach that complements experiment. However, for multicomponent alloys existing approaches suffer from the chemical complexity involved. In this work we propose a method for studying HEAs computationally. Our approach is based on the application of machine-learning potentials based on ab initio data in combination with Monte Carlo simulations. The high efficiency and performance of the approach are demonstrated on the prototype bcc NbMoTaW HEA. The approach is employed to study phase stability, phase transitions, and chemical short-range order. The importance of including local relaxation effects is revealed: they significantly stabilize single-phase formation of bcc NbMoTaW down to room temperature. Finally, a so-far unknown mechanism that drives chemical order due to atomic relaxation at ambient temperatures is discovered.
△ Less
Submitted 6 May, 2019; v1 submitted 25 October, 2018;
originally announced October 2018.
-
Machine-learned multi-system surrogate models for materials prediction
Authors:
Chandramouli Nyshadham,
Matthias Rupp,
Brayden Bekker,
Alexander V. Shapeev,
Tim Mueller,
Conrad W. Rosenbrock,
Gábor Csányi,
David W. Wingate,
Gus L. W. Hart
Abstract:
Surrogate machine-learning models are transforming computational materials science by predicting properties of materials with the accuracy of ab initio methods at a fraction of the computational cost. We demonstrate surrogate models that simultaneously interpolate energies of different materials on a dataset of 10 binary alloys (AgCu, AlFe, AlMg, AlNi, AlTi, CoNi, CuFe, CuNi, FeV, NbNi) with 10 di…
▽ More
Surrogate machine-learning models are transforming computational materials science by predicting properties of materials with the accuracy of ab initio methods at a fraction of the computational cost. We demonstrate surrogate models that simultaneously interpolate energies of different materials on a dataset of 10 binary alloys (AgCu, AlFe, AlMg, AlNi, AlTi, CoNi, CuFe, CuNi, FeV, NbNi) with 10 different species and all possible fcc, bcc and hcp structures up to 8 atoms in the unit cell, 15\,950 structures in total. We find that the deviation of prediction errors when increasing the number of simultaneously modeled alloys is less than 1\,meV/atom. Several state-of-the-art materials representations and learning algorithms were found to qualitatively agree on the prediction errors of formation enthalpy with relative errors of $<$2.5\% for all systems.
△ Less
Submitted 20 May, 2019; v1 submitted 24 September, 2018;
originally announced September 2018.
-
Accelerating high-throughput searches for new alloys with active learning of interatomic potentials
Authors:
Konstantin Gubaev,
Evgeny V. Podryabinkin,
Gus L. W. Hart,
Alexander V. Shapeev
Abstract:
We propose an approach to materials prediction that uses a machine-learning interatomic potential to approximate quantum-mechanical energies and an active learning algorithm for the automatic selection of an optimal training dataset. Our approach significantly reduces the amount of DFT calculations needed, resorting to DFT only to produce the training data, while structural optimization is perform…
▽ More
We propose an approach to materials prediction that uses a machine-learning interatomic potential to approximate quantum-mechanical energies and an active learning algorithm for the automatic selection of an optimal training dataset. Our approach significantly reduces the amount of DFT calculations needed, resorting to DFT only to produce the training data, while structural optimization is performed using the interatomic potentials. Our approach is not limited to one (or a small number of) lattice types (as is the case for cluster expansion, for example) and can predict structures with lattice types not present in the training dataset. We demonstrate the effectiveness of our algorithm by predicting the convex hull for the following three systems: Cu-Pd, Co-Nb-V, and Al-Ni-Ti. Our method is three to four orders of magnitude faster than conventional high-throughput DFT calculations and explores a wider range of materials space. In all three systems, we found unreported stable structures compared to the AFLOW database. Because our method is much cheaper and explores much more of materials space than high-throughput methods or cluster expansion, and because our interatomic potentials have a systematically improvable accuracy compared to empirical potentials such as EAM, etc., it will have a significant impact in the discovery of new alloy phases, particularly those with three or more components.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Accelerating crystal structure prediction by machine-learning interatomic potentials with active learning
Authors:
Evgeny V. Podryabinkin,
Evgeny V. Tikhonov,
Alexander V. Shapeev,
Artem R. Oganov
Abstract:
In this letter we propose a new methodology for crystal structure prediction, which is based on the evolutionary algorithm USPEX and the machine-learning interatomic potentials actively learning on-the-fly. Our methodology allows for an automated construction of an interatomic interaction model from scratch replacing the expensive DFT with a speedup of several orders of magnitude. Predicted low-en…
▽ More
In this letter we propose a new methodology for crystal structure prediction, which is based on the evolutionary algorithm USPEX and the machine-learning interatomic potentials actively learning on-the-fly. Our methodology allows for an automated construction of an interatomic interaction model from scratch replacing the expensive DFT with a speedup of several orders of magnitude. Predicted low-energy structures are then tested on DFT, ensuring that our machine-learning model does not introduce any prediction error. We tested our methodology on a problem of prediction of carbon allotropes, dense sodium structures and boron allotropes including those which have more than 100 atoms in the primitive cell. All the the main allotropes have been reproduced and a new 54-atom structure of boron have been found at very modest computational efforts.
△ Less
Submitted 26 February, 2019; v1 submitted 21 February, 2018;
originally announced February 2018.
-
Machine learning of molecular properties: locality and active learning
Authors:
Konstantin Gubaev,
Evgeny V. Podryabinkin,
Alexander V. Shapeev
Abstract:
In recent years the machine learning techniques have shown a great potential in various problems from a multitude of disciplines, including materials design and drug discovery. The high computational speed on the one hand and the accuracy comparable to that of DFT on another hand make machine learning algorithms efficient for high-throughput screening through chemical and configurational space. Ho…
▽ More
In recent years the machine learning techniques have shown a great potential in various problems from a multitude of disciplines, including materials design and drug discovery. The high computational speed on the one hand and the accuracy comparable to that of DFT on another hand make machine learning algorithms efficient for high-throughput screening through chemical and configurational space. However, the machine learning algorithms available in the literature require large training datasets to reach the chemical accuracy and also show large errors for the so-called outliers - the out-of-sample molecules, not well-represented in the training set. In the present paper we propose a new machine learning algorithm for predicting molecular properties that addresses these two issues: it is based on a local model of interatomic interactions providing high accuracy when trained on relatively small training sets and an active learning algorithm of optimally choosing the training set that significantly reduces the errors for the outliers. We compare our model to the other state-of-the-art algorithms from the literature on the widely used benchmark tests.
△ Less
Submitted 11 April, 2018; v1 submitted 18 September, 2017;
originally announced September 2017.
-
Accurate representation of formation energies of crystalline alloys with many components
Authors:
Alexander Shapeev
Abstract:
In this paper I propose a new model for representing the formation energies of multicomponent crystalline alloys as a function of atom types. In the cases when displacements of atoms from their equilibrium positions are not large, the proposed method has a similar accuracy as the state-of-the-art cluster expansion method, and a better accuracy when the fitting dataset size is small. The proposed m…
▽ More
In this paper I propose a new model for representing the formation energies of multicomponent crystalline alloys as a function of atom types. In the cases when displacements of atoms from their equilibrium positions are not large, the proposed method has a similar accuracy as the state-of-the-art cluster expansion method, and a better accuracy when the fitting dataset size is small. The proposed model has only two tunable parameters - one for the interaction range and one for the interaction complexity.
△ Less
Submitted 1 August, 2017; v1 submitted 10 December, 2016;
originally announced December 2016.
-
Active learning of linearly parametrized interatomic potentials
Authors:
Evgeny V. Podryabinkin,
Alexander V. Shapeev
Abstract:
This paper introduces an active learning approach to the fitting of machine learning interatomic potentials. Our approach is based on the D-optimality criterion for selecting atomic configurations on which the potential is fitted. It is shown that the proposed active learning approach is highly efficient in training potentials on the fly, ensuring that no extrapolation is attempted and leading to…
▽ More
This paper introduces an active learning approach to the fitting of machine learning interatomic potentials. Our approach is based on the D-optimality criterion for selecting atomic configurations on which the potential is fitted. It is shown that the proposed active learning approach is highly efficient in training potentials on the fly, ensuring that no extrapolation is attempted and leading to a completely reliable atomistic simulation without any significant decrease in accuracy. We apply our approach to molecular dynamics and structure relaxation, and we argue that it can be applied, in principle, to any other type of atomistic simulation. The software, test cases, and examples of usage are published at http://gitlab.skoltech.ru/shapeev/mlip/.
△ Less
Submitted 22 August, 2017; v1 submitted 28 November, 2016;
originally announced November 2016.
-
Moment Tensor Potentials: a class of systematically improvable interatomic potentials
Authors:
Alexander V. Shapeev
Abstract:
Density functional theory offers a very accurate way of computing materials properties from first principles. However, it is too expensive for modelling large-scale molecular systems whose properties are, in contrast, computed using interatomic potentials.
The present paper considers, from a mathematical point of view, the problem of constructing interatomic potentials that approximate a given q…
▽ More
Density functional theory offers a very accurate way of computing materials properties from first principles. However, it is too expensive for modelling large-scale molecular systems whose properties are, in contrast, computed using interatomic potentials.
The present paper considers, from a mathematical point of view, the problem of constructing interatomic potentials that approximate a given quantum-mechanical interaction model. In particular, a new class of systematically improvable potentials is proposed, analyzed, and tested on an existing quantum-mechanical database.
△ Less
Submitted 23 July, 2016; v1 submitted 18 December, 2015;
originally announced December 2015.
-
Accuracy of computation of crystalline defects at finite temperature
Authors:
Alexander V. Shapeev,
Mitchell Luskin
Abstract:
The present paper aims at develo** a theory of computation of crystalline defects at finite temperature. In a one-dimensional setting we introduce Gibbs distributions corresponding to such defects and rigorously establish their asymptotic expansion. We then give an example of using such asymptotic expansion to compare the accuracy of computations using the free boundary conditions and using an a…
▽ More
The present paper aims at develo** a theory of computation of crystalline defects at finite temperature. In a one-dimensional setting we introduce Gibbs distributions corresponding to such defects and rigorously establish their asymptotic expansion. We then give an example of using such asymptotic expansion to compare the accuracy of computations using the free boundary conditions and using an atomistic-to-continuum coupling method.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
-
Development of an Optimization-Based Atomistic-to-Continuum Coupling Method
Authors:
Derek Olson,
Pavel Bochev,
Mitchell Luskin,
Alexander V. Shapeev
Abstract:
Atomistic-to-Continuum (AtC) coupling methods are a novel means of computing the properties of a discrete crystal structure, such as those containing defects, that combine the accuracy of an atomistic (fully discrete) model with the efficiency of a continuum model. In this note we extend the optimization-based AtC, formulated in arXiv:1304.4976 for linear, one-dimensional problems to multi-dimensi…
▽ More
Atomistic-to-Continuum (AtC) coupling methods are a novel means of computing the properties of a discrete crystal structure, such as those containing defects, that combine the accuracy of an atomistic (fully discrete) model with the efficiency of a continuum model. In this note we extend the optimization-based AtC, formulated in arXiv:1304.4976 for linear, one-dimensional problems to multi-dimensional settings and arbitrary interatomic potentials. We conjecture optimal error estimates for the multidimensional AtC, outline an implementation procedure, and provide numerical results to corroborate the conjecture for a 1D Lennard-Jones system with next-nearest neighbor interactions.
△ Less
Submitted 23 September, 2013;
originally announced September 2013.
-
Theory-based Benchmarking of the Blended Force-Based Quasicontinuum Method
Authors:
Xingjie Helen Li,
Mitchell Luskin,
Christoph Ortner,
Alexander V. Shapeev
Abstract:
We formulate an atomistic-to-continuum coupling method based on blending atomistic and continuum forces. Our precise choice of blending mechanism is informed by theoretical predictions. We present a range of numerical experiments studying the accuracy of the scheme, focusing in particular on its stability. These experiments confirm and extend the theoretical predictions, and demonstrate a superior…
▽ More
We formulate an atomistic-to-continuum coupling method based on blending atomistic and continuum forces. Our precise choice of blending mechanism is informed by theoretical predictions. We present a range of numerical experiments studying the accuracy of the scheme, focusing in particular on its stability. These experiments confirm and extend the theoretical predictions, and demonstrate a superior accuracy of B-QCF over energy-based blending schemes.
△ Less
Submitted 2 September, 2013; v1 submitted 4 April, 2013;
originally announced April 2013.