-
Stability and Elasticity of Ultrathin Sphere-Patterned Block Copolymer Films
Authors:
Le Qiao,
Daniel A. Vega,
Friederike Schmid
Abstract:
Sphere-patterned ultrathin block copolymers films are potentially interesting for a variety of applications in nanotechnology. We use self-consistent field theory to investigate the elastic response of sphere monolayer films with respect to in-plane shear, in-plane extension and compression deformations, and with respect to bending. The relations between the in-plane elastic moduli is roughly comp…
▽ More
Sphere-patterned ultrathin block copolymers films are potentially interesting for a variety of applications in nanotechnology. We use self-consistent field theory to investigate the elastic response of sphere monolayer films with respect to in-plane shear, in-plane extension and compression deformations, and with respect to bending. The relations between the in-plane elastic moduli is roughly compatible with the expectations for two-dimensional elastic systems with hexagonal symmetry, with one notable exception: The pure shear and the simple shear moduli differ from each other by roughly 20%. Even more importantly, the bending constants are found to be negative, indicating that free-standing block copolymer membranes made of only sphere mono-layer are inherently unstable above the glass transition. Our results are discussed in view of experimental findings.
△ Less
Submitted 28 April, 2024;
originally announced April 2024.
-
Strong stretching theory of polydisperse curved polymer brushes
Authors:
Marios Giannakou,
Oleg V. Borisov,
Friederike Schmid
Abstract:
We investigate the effect of polydispersity on the properties of curved linear brushes in good solvent and for molten brushes. To this end, we extend the strong stretching theory for polydisperse brushes to curved geometries and investigate the polymer chain end profiles, bending moduli and other properties for experimentally relevant polymer chain length distributions of the Schulz-Zimm type. We…
▽ More
We investigate the effect of polydispersity on the properties of curved linear brushes in good solvent and for molten brushes. To this end, we extend the strong stretching theory for polydisperse brushes to curved geometries and investigate the polymer chain end profiles, bending moduli and other properties for experimentally relevant polymer chain length distributions of the Schulz-Zimm type. We also investigate the properties of End Exclusion Zones (EEZ) that may appear in convex geometries under certain conditions, and show that their position in the brush can be engineered by careful selection of the polymer length distribution. Lastly, we propose a method to engineer chain end profiles by engineering the polymer length distribution.
△ Less
Submitted 24 June, 2024; v1 submitted 10 April, 2024;
originally announced April 2024.
-
Cloaking Transition of Droplets on Lubricated Brushes
Authors:
Rodrique G. M. Badr,
Lukas Hauer,
Doris Vollmer,
Friederike Schmid
Abstract:
We study the equilibrium properties and the wetting behavior of a simple liquid on a polymer brush, with and without presence of lubricant by multibody Dissipative Particle Dynamics simulations. The lubricant is modelled as a polymeric liquid consisting of short chains that are chemically identical to the brush polymers. We investigate the behavior of the brush in terms of the grafting density and…
▽ More
We study the equilibrium properties and the wetting behavior of a simple liquid on a polymer brush, with and without presence of lubricant by multibody Dissipative Particle Dynamics simulations. The lubricant is modelled as a polymeric liquid consisting of short chains that are chemically identical to the brush polymers. We investigate the behavior of the brush in terms of the grafting density and the amount of lubricant present. Regarding the wetting behavior, we study a sessile droplet on top of the brush. The droplet consists of non-bonded particles that form a dense phase. Our model and choice of parameters result in the formation of a wetting ridge and in the cloaking of the droplet by the lubricant, i.e. the lubricant chains creep up onto the droplet and eventually cover its surface completely. Cloaking is a phenomenon that is observed experimentally and is of integral importance to the dynamics of sliding droplets. We quantify the cloaking in terms of its thickness, which increases with the amount of lubricant present. The analysis reveals a well-defined transition point where the cloaking sets in. We propose a thermodynamic theory to explain this behavior. In addition we investigate the dependence of the contact angles on the size of the droplet and the possible effect of line tension. We quantify the variation of the contact angle with the curvature of the contact line on a lubricant free brush and find a negative value for the line tension. Finally we investigate the effect of cloaking/lubrication on the contact angles and the wetting ridge. We find that lubrication and cloaking reduce the contact angles by a couple of degrees. The effect on the wetting ridge is a reduction in the extension of the brush chains near the three phase contact line, an effect that was also observed in experiments of droplets on crosslinked gels.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Dynamics of Droplets Moving on Lubricated Polymer Brushes
Authors:
Rodrique G. M. Badr,
Lukas Hauer,
Doris Vollmer,
Friederike Schmid
Abstract:
Understanding the dynamics of drops on polymer-coated surfaces is crucial for optimizing applications such as self-cleaning materials or microfluidic devices. While the static and dynamic properties of deposited drops have been well characterised, a microscopic understanding of the underlying dynamics is missing. In particular, it is unclear how drop dynamics depends on the amount of uncrosslinked…
▽ More
Understanding the dynamics of drops on polymer-coated surfaces is crucial for optimizing applications such as self-cleaning materials or microfluidic devices. While the static and dynamic properties of deposited drops have been well characterised, a microscopic understanding of the underlying dynamics is missing. In particular, it is unclear how drop dynamics depends on the amount of uncrosslinked chains in the brush, because experimental techniques fail to quantify those. Here we use coarse-grained simulations to study droplets moving on a lubricated polymer brush substrate under the influence of an external body force. The simulation model is based on the many body dissipative particle dynamics (mDPD) method and designed to mimic a system of water droplets on polydimethylsiloxane (PDMS) brushes with chemically identical PDMS lubricant. In agreement with experiments, we find a sublinear power law dependence between the external force $F$ and the droplet velocity $v$, $F \propto v^α$ with $α<1$; however, the exponents differ ($α\sim 0.6-0.7$ in simulations versus $α\sim 0.25$ in experiments). With increasing velocity, the droplets elongate and the receding contact angle decreases, whereas the advancing contact angle remains roughly constant. Analyzing the flow profiles inside the droplet reveals that the droplets do not slide, but roll, with vanishing slip at the substrate surface. Surprisingly, adding lubricant has very little effect on the effective friction force between the droplet and the substrate, even though it has a pronounced effect on the size and structure of the wetting ridge, especially above the cloaking transition.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Tracing Dirac points of topological surface states by ferromagnetic resonance
Authors:
Laura Pietanesi,
Magdalena Marganska,
Thomas Mayer,
Michael Barth,
Lin Chen,
Ji Zou,
Adrian Weindl,
Alexander Liebig,
Rebeca Díaz-Pardo,
Dhavala Suri,
Florian Schmid,
Franz J. Gießibl,
Klaus Richter,
Yaroslav Tserkovnyak,
Matthias Kronseder,
Christian H. Back
Abstract:
Ferromagnetic resonance is used to reveal features of the buried electronic band structure at interfaces between ferromagnetic metals and topological insulators. By monitoring the evolution of magnetic dam**, the application of this method to a hybrid structure consisting of a ferromagnetic layer and a 3D topological insulator reveals a clear fingerprint of the Dirac point and exhibits additiona…
▽ More
Ferromagnetic resonance is used to reveal features of the buried electronic band structure at interfaces between ferromagnetic metals and topological insulators. By monitoring the evolution of magnetic dam**, the application of this method to a hybrid structure consisting of a ferromagnetic layer and a 3D topological insulator reveals a clear fingerprint of the Dirac point and exhibits additional features of the interfacial band structure not otherwise observable. The underlying spin-pum** mechanism is discussed in the framework of dissipation of angular momentum by topological surface states (TSSs). Tuning of the Fermi level within the TSS was verified both by varying the stoichiometry of the topological insulator layer and by electrostatic backgating and the dam** values obtained in both cases show a remarkable agreement. The high energy resolution of this method additionally allows us to resolve the energetic shift of the local Dirac points generated by local variations of the electrostatic potential. Calculations based on the chiral tunneling process naturally occurring in TSS agree well with the experimental results.
△ Less
Submitted 7 March, 2024; v1 submitted 6 March, 2024;
originally announced March 2024.
-
A numerical approach for calculating exact non-adiabatic terms in quantum dynamics
Authors:
Ewen D C Lawrence,
Sebastian F J Schmid,
Ieva Čepaitė,
Peter Kirton,
Callum W Duncan
Abstract:
Understanding how non-adiabatic terms affect quantum dynamics is fundamental to improving various protocols for quantum technologies. We present a novel approach to computing the Adiabatic Gauge Potential (AGP), which gives information on the non-adiabatic terms that arise from time dependence in the Hamiltonian. Our approach uses commutators of the Hamiltonian to build up an appropriate basis of…
▽ More
Understanding how non-adiabatic terms affect quantum dynamics is fundamental to improving various protocols for quantum technologies. We present a novel approach to computing the Adiabatic Gauge Potential (AGP), which gives information on the non-adiabatic terms that arise from time dependence in the Hamiltonian. Our approach uses commutators of the Hamiltonian to build up an appropriate basis of the AGP, which can be easily truncated to give an approximate form when the exact result is intractable. We use this approach to study the AGP obtained for the transverse field Ising model on a variety of graphs, showing how the different underlying graph structures can give rise to very different scaling for the number of terms required in the AGP.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
How boundary interactions dominate emergent driving of passive probes in active matter
Authors:
Jeanine Shea,
Gerhard Jung,
Friederike Schmid
Abstract:
Colloidal probes immersed in an active bath have been found to behave like active particles themselves. Here, we use coarse-grained simulations to investigate the mechanisms behind this behavior. We find that the active motion of the colloid cannot be simply attributed to the convective motion in the bath. Instead, the boundary of the probe contributes significantly to these adopted dynamics by ca…
▽ More
Colloidal probes immersed in an active bath have been found to behave like active particles themselves. Here, we use coarse-grained simulations to investigate the mechanisms behind this behavior. We find that the active motion of the colloid cannot be simply attributed to the convective motion in the bath. Instead, the boundary of the probe contributes significantly to these adopted dynamics by causing active bath particles to spontaneously accumulate at the probe. This gathering of active bath particles then pushes the probe, thus promoting its emergent active-particle-like behavior. Furthermore, we find that the dynamic properties of the probe depend on its size in a non-monotonic way, which further highlights the non-trivial interplay between probe and bath.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Passive particle in an active bath: How can we tell it is out of equilibrium?
Authors:
Jeanine Shea,
Gerhard Jung,
Friederike Schmid
Abstract:
We study a passive probe immersed in a fluid of active particles. Despite the system's non-equilibrium nature, the trajectory of the probe does not exhibit non-equilibrium signatures: its velocity distribution remains Gaussian, the second fluctuation dissipation theorem is not fundamentally violated, and the motion does not indicate breaking of time reversal symmetry. To tell that the probe is out…
▽ More
We study a passive probe immersed in a fluid of active particles. Despite the system's non-equilibrium nature, the trajectory of the probe does not exhibit non-equilibrium signatures: its velocity distribution remains Gaussian, the second fluctuation dissipation theorem is not fundamentally violated, and the motion does not indicate breaking of time reversal symmetry. To tell that the probe is out of equilibrium requires examination of its behavior in tandem with that of the active fluid: the kinetic temperature of the probe does not equilibrate to that of the surrounding active particles. As a strategy to diagnose non-equilibrium from probe trajectories alone, we propose to examine their response to a small perturbation which reveals a non-equilibrium signature through a violation of the first fluctuation dissipation theorem.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Stability of branched tubular membrane structures
Authors:
Maike Jung,
Gerhard Jung,
Friederike Schmid
Abstract:
We study the energetics and stability of branched tubular membrane structures by computer simulations of a triangulated network model. We find that triple (Y-)junctions can be created and stabilized by applying mechanical forces, if the angle between branches is 120 o . The same holds for tetrahedral junctions with tetraeder angles. If the wrong angles are enforced, the branches coalesce to a line…
▽ More
We study the energetics and stability of branched tubular membrane structures by computer simulations of a triangulated network model. We find that triple (Y-)junctions can be created and stabilized by applying mechanical forces, if the angle between branches is 120 o . The same holds for tetrahedral junctions with tetraeder angles. If the wrong angles are enforced, the branches coalesce to a linear structure, a pure tube. After releasing the mechanical force, Y-branched structures remain metastable if one constrains the enclosed volume and the average curvature (the area difference) to a fixed value; tetrahedral junctions however split up into two Y-junctions. Somewhat counterintuitively, the energy cost of adding a Y-branch is negative in structures with fixed surface area and tube diameter, even if one accounts for the positive contribution of the additional branch end. For fixed average curvature, however, adding a branch also enforces a thinning of tubes, therefore the overall curvature energy cost is positive. Possible implications for the stability of branched networks structures in cells are discussed.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Force renormalization for probes immersed in an active bath
Authors:
Jeanine Shea,
Gerhard Jung,
Friederike Schmid
Abstract:
Langevin equations or generalized Langevin equations (GLEs) are popular models for describing the motion of a particle in a fluid medium in an effective manner. Here we examine particles immersed in an inherently nonequilibrium fluid, i.e., an active bath, which are subject to an external force. Specifically, we consider two types of forces that are highly relevant for microrheological studies: A…
▽ More
Langevin equations or generalized Langevin equations (GLEs) are popular models for describing the motion of a particle in a fluid medium in an effective manner. Here we examine particles immersed in an inherently nonequilibrium fluid, i.e., an active bath, which are subject to an external force. Specifically, we consider two types of forces that are highly relevant for microrheological studies: A harmonic, trap** force and a constant, "drag" force. We study such systems by molecular simulations and use the simulation data to derive an effective GLE description. We find that, in an active bath, the external force in the GLE is not equal to the physical external force, but rather a renormalized external force, which can be significantly smaller. The effect cannot be attributed to the mere temperature renormalization, which is also observed.
△ Less
Submitted 2 May, 2024; v1 submitted 4 October, 2023;
originally announced October 2023.
-
Nanodroplet Flight Control in Electrohydrodynamic Redox 3D Printing
Authors:
Maxence Menétrey,
Lukáš Zezulka,
Pascal Fandré,
Fabian Schmid,
Ralph Spolenak
Abstract:
Electrohydrodynamic 3D printing is an additive manufacturing technique with enormous potential in plasmonics, microelectronics, and sensing applications, thanks to its broad materials palette, high voxel deposition rate, and compatibility with various substrates. However, the electric field used to deposit material is concentrated at the depositing structure resulting in the focusing of the charge…
▽ More
Electrohydrodynamic 3D printing is an additive manufacturing technique with enormous potential in plasmonics, microelectronics, and sensing applications, thanks to its broad materials palette, high voxel deposition rate, and compatibility with various substrates. However, the electric field used to deposit material is concentrated at the depositing structure resulting in the focusing of the charged droplets and geometry-dependent landing positions, which complicates the fabrication of complex 3D shapes. The low level of concordance between design and printout seriously impedes the development of electrohydrodynamic 3D printing and rationalizes the simplicity of the designs reported so far. In this work, we break the electric field centrosymmetry to study the resulting deviation in the flight trajectory of the droplets. Comparison of experimental outcomes with predictions of an FEM model provides new insights into the droplet characteristics and unveils how the product of droplet size and charge uniquely governs its kinematics. From these insights, we develop reliable predictions of the jet trajectory and allow the computation of optimized printing paths counterbalancing the electric field distortion, thereby enabling the fabrication of geometries with unprecedented complexity.
△ Less
Submitted 16 August, 2023;
originally announced August 2023.
-
Viscosity of flexible and semiflexible ring melts -- molecular origins and flow-induced segregation
Authors:
Ranajay Datta,
Fabian Berressem,
Friederike Schmid,
Arash Nikoubashman,
Peter Virnau
Abstract:
We investigate with numerical simulations the molecular origin of viscosity in melts of flexible and semiflexible oligomer rings in comparison to corresponding systems with linear chains. The strong increase of viscosity with ring stiffness is linked to the formation of entangled clusters, which dissolve under shear. This shear-induced breakup and alignment of rings in the flow direction lead to p…
▽ More
We investigate with numerical simulations the molecular origin of viscosity in melts of flexible and semiflexible oligomer rings in comparison to corresponding systems with linear chains. The strong increase of viscosity with ring stiffness is linked to the formation of entangled clusters, which dissolve under shear. This shear-induced breakup and alignment of rings in the flow direction lead to pronounced shear-thinning and non-Newtonian behavior. In melts of linear chains, the viscosity can be associated with the (average) number of entanglements between chains, which also dissolve under shear. While blends of flexible and semiflexible rings are mixed at rest, the two species separate under flow. This phenomenon has potential applications in microfluidic devices to segregate ring polymers of similar mass and chemical composition by their bending rigidity.
△ Less
Submitted 27 July, 2023; v1 submitted 25 May, 2023;
originally announced May 2023.
-
Understanding and modeling polymers: The challenge of multiple scales
Authors:
Friederike Schmid
Abstract:
Polymer materials have the characteristic feature that they are multiscale systems by definition. Already the description of a single molecules involves a multitude of different scales, and cooperative processes in polymer assemblies are governed by the interplay of these scales. Polymers have been among the first materials for which systematic multiscale techniques were developed, yet they contin…
▽ More
Polymer materials have the characteristic feature that they are multiscale systems by definition. Already the description of a single molecules involves a multitude of different scales, and cooperative processes in polymer assemblies are governed by the interplay of these scales. Polymers have been among the first materials for which systematic multiscale techniques were developed, yet they continue to present extraordinary challenges for modellers. In this perspective, we review popular models that are used to describe polymers on different scales and discuss scale bridging strategies such as static and dynamic coarse-graining methods and multiresolution approaches. We close with a list of hard problems which still need to be solved in order to gain a comprehensive quantitative understanding of polymer systems on all scales.
△ Less
Submitted 17 December, 2022;
originally announced December 2022.
-
Adsorption-active polydisperse brush with tunable molecular mass distribution
Authors:
Anna S. Ivanova,
Alexey A. Polotsky,
Alexander M. Skvortsov,
Leonid I. Klushin,
Friederike Schmid
Abstract:
Recently a novel class of responsive uncharged polymer brushes has been proposed [Klushin et al, J. Chem. Phys. 154, 074904 (2021)] where the brush-forming chains have an affinity to the substrate. For sufficiently strong surface interactions, a fraction of chains condenses into a near-surface layer, while the remaining ones form the outer brush with a reduced grafting density. The dense layer and…
▽ More
Recently a novel class of responsive uncharged polymer brushes has been proposed [Klushin et al, J. Chem. Phys. 154, 074904 (2021)] where the brush-forming chains have an affinity to the substrate. For sufficiently strong surface interactions, a fraction of chains condenses into a near-surface layer, while the remaining ones form the outer brush with a reduced grafting density. The dense layer and the more tenuous outer brush can be seen as coexisting microphases. The effective grafting density of the outer brush is controlled by the adsorption strength and can be changed reversibly as a response to changes in environmental parameters.
In this paper we use numerical self-consistent field calculations and theoretical considerations to study this phenomenon in polydisperse brushes. Our results reveal an unexpected effect: Although all chains are chemically identical, shorter chains are adsorbed preferentially. Hence, with the increase in the surface affinity parameter, a reduction in the surface grafting density of the residual brush is accompanied by a change in the shape of its molecular mass distribution. In particular, an originally bidisperse brush can be effectively transformed into a nearly monodisperse one containing only the longer chain fraction.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Fluctuation-Dissipation Relations Far from Equilibrium: A Case Study
Authors:
Gerhard Jung,
Friederike Schmid
Abstract:
Fluctuation-dissipation relations or "theorems" (FDTs) are fundamental for statistical physics and can be rigorously derived for equilibrium systems. Their applicability to non-equilibrium systems is, however, debated. Here, we simulate an active microrheology experiment, in which a spherical colloid is pulled with a constant external force through a fluid, creating near-equilibrium and far-from-e…
▽ More
Fluctuation-dissipation relations or "theorems" (FDTs) are fundamental for statistical physics and can be rigorously derived for equilibrium systems. Their applicability to non-equilibrium systems is, however, debated. Here, we simulate an active microrheology experiment, in which a spherical colloid is pulled with a constant external force through a fluid, creating near-equilibrium and far-from-equilibrium systems. We characterize the structural and dynamical properties of these systems, and reconstruct an effective generalized Langevin equation (GLE) for the colloid dynamics. Specifically, we test the validity of two FDTs: The first FDT relates the non-equilibrium response of a system to equilibrium correlation functions, and the second FDT relates the memory friction kernel in the GLE to the stochastic force. We find that the validity of the first FDT depends strongly on the strength of the external driving: it is fulfilled close to equilibrium and breaks down far from it. In contrast, we observe that the second FDT is always fulfilled. We provide a mathematical argument why this generally holds for memory kernels reconstructed from a deterministic Volterra equation for correlation functions, even for non-stationary non-equilibrium systems.
Motivated by the Mori-Zwanzig formalism, we therefore suggest to impose an orthogonality constraint on the stochastic force, which is in fact equivalent to the validity of this Volterra equation. Such GLEs automatically satisfy the second FDT and are unique, which is desirable when using GLEs for coarse-grained modeling.
△ Less
Submitted 14 September, 2021; v1 submitted 1 June, 2021;
originally announced June 2021.
-
Dynamic coarse-graining of polymer systems using mobility functions
Authors:
Bing Li,
Kostas Daoulas,
Friederike Schmid
Abstract:
We propose a dynamic coarse-graining (CG) scheme for map** heterogeneous polymer fluids onto extremely CG models in a dynamically consistent manner. The idea is to use as target function for the map** a wave-vector dependent mobility function derived from the single-chain dynamic structure factor, which is calculated in the microscopic reference system. In previous work, we have shown that dyn…
▽ More
We propose a dynamic coarse-graining (CG) scheme for map** heterogeneous polymer fluids onto extremely CG models in a dynamically consistent manner. The idea is to use as target function for the map** a wave-vector dependent mobility function derived from the single-chain dynamic structure factor, which is calculated in the microscopic reference system. In previous work, we have shown that dynamic density functional calculations based on this mobility function can accurately reproduce the order/disorder kinetics in polymer melts, thus it is a suitable starting point for dynamic map**. To enable the map** over a range of relevant wave vectors, we propose to modify the CG dynamics by introducing internal friction parameters that slow down the CG monomer dynamics on local scales, without affecting the static equilibrium structure of the system. We illustrate and discuss the method using the example of infinitely long linear Rouse polymers mapped onto ultrashort CG chains. We show that our method can be used to construct dynamically consistent CG models for homopolymers with CG chain length N=4, whereas for copolymers, longer CG chain lengths are necessary
△ Less
Submitted 7 March, 2021; v1 submitted 26 February, 2021;
originally announced February 2021.
-
Polymer brushes with reversibly tunable grafting density
Authors:
Leonid I. Klushin,
Alexander M. Skvortsov,
Alexey A. Polotsky,
Anna S. Ivanova,
Friederike Schmid
Abstract:
We propose a novel class of responsive polymer brushes, where the effective grafting density can be controlled by external stimuli. This is achieved by using end-grafted polymer chains that have an affinity to the substrate. For sufficiently strong surface interactions, a fraction of chains condenses into a near-surface layer, while the remaining ones form the outer brush. The dense layer and the…
▽ More
We propose a novel class of responsive polymer brushes, where the effective grafting density can be controlled by external stimuli. This is achieved by using end-grafted polymer chains that have an affinity to the substrate. For sufficiently strong surface interactions, a fraction of chains condenses into a near-surface layer, while the remaining ones form the outer brush. The dense layer and the more tenuous outer brush can be seen as coexisting microphases. The effective grafting density of the outer brush is controlled by the adsorption strength and can be changed reversibly and in a controlled way as a response to changes in environmental parameters. The effect is demonstrated by numerical SCF calculations and analyzed by scaling arguments. Since the thickness of the denser layer is about a few monomer sizes, its capacity to form a microphase is limited by the product of the brush chain length and the grafting density. We explore the range of chain lengths and grafting densities where the effect is most pronounced. In this range, the SCF studies suggest that individual chains inside the brush show large rapid fluctuations between two states that are separated by only a small free energy barrier. The behavior of the brush as a whole, however, does not reflect these large fluctuations, and the effective grafting density varies smoothly as a function of the control parameters.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Shear-thinning in Polymer Melts -- Molecular Origins and Hybrid Multiscale Simulations
Authors:
Ranajay Datta,
Leonid Yelash,
Friederike Schmid,
Florian Kummer,
Martin Oberlack,
Maria Lukáčová-Medvid'ová,
Peter Virnau
Abstract:
We investigate the molecular origin of shear-thinning in melts of flexible, semiflexible and rigid oligomers with coarse-grained simulations of a sheared melt. Alignment, stretching and tumbling modes or suppression of the latter all contribute to understanding how macroscopic flow properties emerge from the molecular level. By performing simulations of single chains in a shear flow, we identify w…
▽ More
We investigate the molecular origin of shear-thinning in melts of flexible, semiflexible and rigid oligomers with coarse-grained simulations of a sheared melt. Alignment, stretching and tumbling modes or suppression of the latter all contribute to understanding how macroscopic flow properties emerge from the molecular level. By performing simulations of single chains in a shear flow, we identify which of these phenomena are of collective nature and arise through interchain interactions and which are already present in dilute systems. Building upon these microscopic simulations we identify by means of the Irving-Kirkwood formula the corresponding macroscopic stress tensor for a non-Newtonian polymer fluid. Shear-thinning effects in oligomer melts are also demonstrated by macroscopic simulations of a channel flow. The latter have been obtained by the discontinuous Galerkin method approximating macroscopic polymer flows. Our study confirms the influence of microscopic details in the molecular structure of short polymers such as chain flexibility on macroscopic polymer flows.
△ Less
Submitted 14 July, 2021; v1 submitted 10 January, 2021;
originally announced January 2021.
-
Model reduction techniques for the computation of extended Markov parameterizations for generalized Langevin equations
Authors:
Niklas Bockius,
Jeanine Shea,
Gerhard Jung,
Friederike Schmid,
Martin Hanke
Abstract:
The generalized Langevin equation is a model for the motion of coarse-grained particles where dissipative forces are represented by a memory term. The numerical realization of such a model requires the implementation of a stochastic delay-differential equation and the estimation of a corresponding memory kernel. Here we develop a new approach for computing a data-driven Markov model for the motion…
▽ More
The generalized Langevin equation is a model for the motion of coarse-grained particles where dissipative forces are represented by a memory term. The numerical realization of such a model requires the implementation of a stochastic delay-differential equation and the estimation of a corresponding memory kernel. Here we develop a new approach for computing a data-driven Markov model for the motion of the particles, given equidistant samples of their velocity autocorrelation function. Our method bypasses the determination of the underlying memory kernel by representing it via up to about twenty auxiliary variables. The algorithm is based on a sophisticated variant of the Prony method for exponential interpolation and employs the Positive Real Lemma from model reduction theory to extract the associated Markov model. We demonstrate the potential of this approach for the test case of anomalous diffusion, where data are given analytically, and then apply our method to velocity autocorrelation data of molecular dynamics simulations of a colloid in a Lennard-Jones fluid. In both cases, the VACF and the memory kernel can be reproduced very accurately. Moreover, we show that the algorithm can also handle input data with large statistical noise. We anticipate that it will be a very useful tool in future studies that involve dynamic coarse-graining of complex soft matter systems.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Transport properties of band engineered p-n heterostructures of epitaxial Bi$_2$Se$_3$/(Bi$_{1-x}$Sb$_x$)$_2$(Te$_{1-y}$Se$_y$)$_3$ topological insulators
Authors:
T. Mayer,
H. Werner,
F. Schmid,
R. Diaz-Pardo,
J. Fujii,
I. Vobornik,
C. H. Back,
M. Kronseder,
D. Bougeard
Abstract:
The challenge of parasitic bulk do** in Bi-based 3D topological insulator materials is still omnipresent, especially when preparing samples by molecular beam epitaxy (MBE). Here, we present a heterostructure approach for epitaxial BSTS growth. A thin n-type Bi$_2$Se$_3$ (BS) layer is used as an epitaxial and electrostatic seed which drastically improves the crystalline and electronic quality and…
▽ More
The challenge of parasitic bulk do** in Bi-based 3D topological insulator materials is still omnipresent, especially when preparing samples by molecular beam epitaxy (MBE). Here, we present a heterostructure approach for epitaxial BSTS growth. A thin n-type Bi$_2$Se$_3$ (BS) layer is used as an epitaxial and electrostatic seed which drastically improves the crystalline and electronic quality and reproducibility of the sample properties. In heterostructures of BS with p-type (Bi$_{1-x}$Sb$_x$)$_2$(Te$_{1-y}$Se$_y$)$_3$ (BSTS) we demonstrate intrinsic band bending effects to tune the electronic properties solely by adjusting the thickness of the respective layer. The analysis of weak anti-localization features in the magnetoconductance indicates a separation of top and bottom conduction layers with increasing BSTS thickness. By temperature- and gate-dependent transport measurements, we show that the thin BS seed layer can be completely depleted within the heterostructure and demonstrate electrostatic tuning of the bands via a back-gate throughout the whole sample thickness.
△ Less
Submitted 20 January, 2021; v1 submitted 13 October, 2020;
originally announced October 2020.
-
Dynamic self-consistent field approach for studying kinetic processes in multiblock copolymer melts
Authors:
Friederike Schmid,
Bing Li
Abstract:
The self-consistent field theory is a popular and highly successful theoretical framework for studying equilibrium (co)polymer systems at the mesoscopic level. Dynamic density functionals allow one to use this framework for studying dynamical processes in the diffusive, non-inertial regime. The central quantity in these approaches is the mobility function, which describes the effect of chain conne…
▽ More
The self-consistent field theory is a popular and highly successful theoretical framework for studying equilibrium (co)polymer systems at the mesoscopic level. Dynamic density functionals allow one to use this framework for studying dynamical processes in the diffusive, non-inertial regime. The central quantity in these approaches is the mobility function, which describes the effect of chain connectivity on the nonlocal response of monomers to thermodynamic driving fields. In a recent study [Mantha et al, Macromolecules 53, 3409 (2020)], we have developed a method to systematically construct mobility functions from reference fine-grained simulations. Here we focus on melts of linear chains in the Rouse regime and show how the mobility functions can be calculated semi-analytically for multiblock copolymers with arbitrary sequences without resorting to simulations. In this context, an accurate approximate expression for the single-chain dynamic structure factor is derived. Several limiting regimes are discussed. Then we apply the resulting density functional theory to study ordering processes in a two-length scale block copolymer system after instantaneous quenches into the ordered phase. Different dynamical regimes in the ordering process are identified: At early times, the ordering on short scales dominates; at late times, the ordering on larger scales takes over. For large quench depths, the system does not necessarily relax into the true equilibrium state. Our density functional approach could be used for the computer-assisted design of quenching protocols in order to create novel nonequilibrium materials.
△ Less
Submitted 11 February, 2021; v1 submitted 28 September, 2020;
originally announced September 2020.
-
Bottom-up construction of dynamic density functional theories for inhomogeneous polymer systems from microscopic simulations
Authors:
Sriteja Mantha,
Shuanhu Qi,
Friederike Schmid
Abstract:
We propose and compare different strategies to construct dynamic density functional theories (DDFTs) for inhomogeneous polymer systems close to equilibrium from microscopic simulation trajectories. We focus on the systematic construction of the mobility coefficient, $Λ(r,r')$, which relates the thermodynamic driving force on monomers at position $r'$ to the motion of monomers at position $r$. A fi…
▽ More
We propose and compare different strategies to construct dynamic density functional theories (DDFTs) for inhomogeneous polymer systems close to equilibrium from microscopic simulation trajectories. We focus on the systematic construction of the mobility coefficient, $Λ(r,r')$, which relates the thermodynamic driving force on monomers at position $r'$ to the motion of monomers at position $r$. A first approach based on the Green-Kubo formalism turns out to be impractical because of a severe plateau problem. Instead, we propose to extract the mobility coefficient from an effective characteristic relaxation time of the single chain dynamic structure factor. To test our approach, we study the kinetics of ordering and disordering in diblock copolymer melts. The DDFT results are in very good agreement with the data from corresponding fine-grained simulations.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Quorum-sensing active particles with discontinuous motility
Authors:
Andreas Fischer,
Friederike Schmid,
Thomas Speck
Abstract:
We develop a dynamic mean-field theory for polar active particles that interact through a self-generated field, in particular one generated through emitting a chemical signal. While being a form of chemotactic response, it is different from conventional chemotaxis in that particles discontinuously change their motility when the local concentration surpasses a threshold. The resulting coupled equat…
▽ More
We develop a dynamic mean-field theory for polar active particles that interact through a self-generated field, in particular one generated through emitting a chemical signal. While being a form of chemotactic response, it is different from conventional chemotaxis in that particles discontinuously change their motility when the local concentration surpasses a threshold. The resulting coupled equations for density and polarization are linear and can be solved analytically for simple geometries, yielding inhomogeneous density profiles. Specifically, here we consider a planar and circular interface. Our theory thus explains the observed coexistence of dense aggregates with an active gas. There are, however, differences to the more conventional picture of liquid-gas coexistence based on a free energy, most notably the absence of a critical point. We corroborate our analytical predictions by numerical simulations of active particles under confinement and interacting through volume exclusion. Excellent quantitative agreement is reached through an effective translational diffusion coefficient. We finally show that an additional response to the chemical gradient direction is sufficient to induce vortex clusters. Our results pave the way to engineer motility responses in order to achieve aggregation and collective behavior even at unfavorable conditions.
△ Less
Submitted 27 September, 2019;
originally announced September 2019.
-
Superfast collective motion of magnetic particles
Authors:
Olga Baun,
Peter Blümler,
Friederike Schmid,
Evgeny S. Asmolov,
Olga I. Vinogradova
Abstract:
It is well-known that magnetic forces can induce a formation of densely packed strings of magnetic particles or even sheafs of several strings (spindles). Here we show that in a sufficiently strong magnetic field, more complex aggregates of particles, translating with a much faster speed than would be for a single particle or even a spindle, can be assembled at the water-air interface. Such a supe…
▽ More
It is well-known that magnetic forces can induce a formation of densely packed strings of magnetic particles or even sheafs of several strings (spindles). Here we show that in a sufficiently strong magnetic field, more complex aggregates of particles, translating with a much faster speed than would be for a single particle or even a spindle, can be assembled at the water-air interface. Such a superfast flotilla is composed of many distant strings or spindles, playing a role of its vessels, and moves, practically, as a whole. We provide theoretical results to interpret the effect of a collective motion of such magnetic vessels. Our theory shows that, in contrast to an isolated chain or spindle, which velocity grows logarithmically with the number of magnetic particles, the speed of the interface flotilla becomes much higher, being proportional to the square root of their number. These results may guide the design of magnetic systems for extremely fast controlled delivery.
△ Less
Submitted 9 February, 2019;
originally announced February 2019.
-
How ill-defined constituents produce well-defined nanoparticles: Effect of polymer dispersity on the uniformity of copolymeric micelles
Authors:
Sriteja Mantha,
Shuanhu Qi,
Matthias Barz,
Friederike Schmid
Abstract:
We investigate the effect of polymer length dispersity on the properties of self-assembled micelles in solution by self-consistent field calculations. Polydispersity stabilizes micelles by raising the free energy barriers of micelle formation and dissolution. Most importantly, it significantly reduces the size fluctuations of micelles: Block copolymers of moderate polydispersity form more uniform…
▽ More
We investigate the effect of polymer length dispersity on the properties of self-assembled micelles in solution by self-consistent field calculations. Polydispersity stabilizes micelles by raising the free energy barriers of micelle formation and dissolution. Most importantly, it significantly reduces the size fluctuations of micelles: Block copolymers of moderate polydispersity form more uniform particles than their monodisperse counterparts. We attribute this to the fact that the packing of the solvophobic monomers in the core can be optimized if the constituent polymers have different length.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
Poly-Sarcosine and Poly(ethylene-glycol) interactions with proteins investigated using molecular dynamics simulations
Authors:
Giovanni Settanni,
Timo Schäfer,
Christian Muhl,
Matthias Barz,
Friederike Schmid
Abstract:
Nanoparticles coated with hydrophilic polymers often show a reduction in unspecific interactions with the biological environment, which improves their biocompatibility. The molecular determinants of this reduction are not very well understood yet, and their knowledge may help improving nanoparticle design. Here we address, using molecular dynamics simulations, the interactions of human serum album…
▽ More
Nanoparticles coated with hydrophilic polymers often show a reduction in unspecific interactions with the biological environment, which improves their biocompatibility. The molecular determinants of this reduction are not very well understood yet, and their knowledge may help improving nanoparticle design. Here we address, using molecular dynamics simulations, the interactions of human serum albumin, the most abundant serum protein, with two promising hydrophilic polymers used for the coating of therapeutic nanoparticles, poly(ethylene-glycol) and poly-sarcosine. By simulating the protein immersed in a polymer-water mixture, we show that the two polymers have a very similar affinity for the protein surface, both in terms of the amount of polymer adsorbed and also in terms of the type of amino acids mainly involved in the interactions. We further analyze the kinetics of adsorption and how it affects the polymer conformations. Minor differences between the polymers are observed in the thickness of the adsorption layer, that are related to the different degree of flexibility of the two molecules. In comparison poly-alanine, an isomer of poly-sarcosine known to self-aggregate and induce protein aggregation, shows a significantly larger affinity for the protein surface than PEG and PSar, which we show to be related not to a different patterns of interactions with the protein surface, but to the different way the polymer interacts with water.
△ Less
Submitted 29 October, 2018;
originally announced October 2018.
-
Generalized Langevin dynamics: Construction and numerical integration of non-Markovian particle-based models
Authors:
Gerhard Jung,
Martin Hanke,
Friederike Schmid
Abstract:
We propose a generalized Langevin dynamics (GLD) technique to construct non-Markovian particle-based coarse-grained models from fine-grained reference simulations and to efficiently integrate them. The proposed GLD model has the form of a discretized generalized Langevin equation with distance-dependent two-particle contributions to the self- and pair-memory kernels. The memory kernels are iterati…
▽ More
We propose a generalized Langevin dynamics (GLD) technique to construct non-Markovian particle-based coarse-grained models from fine-grained reference simulations and to efficiently integrate them. The proposed GLD model has the form of a discretized generalized Langevin equation with distance-dependent two-particle contributions to the self- and pair-memory kernels. The memory kernels are iteratively reconstructed from the dynamical correlation functions of an underlying fine-grained system. We develop a simulation algorithm for this class of non-Markovian models that scales linearly with the number of coarse-grained particles. Our GLD method is suitable for coarse-grained studies of systems with incomplete time scale separation, as is often encountered, e.g., in soft matter systems.
We apply the method to a suspension of nanocolloids with frequency-dependent hydrodynamic interactions. We show that the results from GLD simulations perfectly reproduce the dynamics of the underlying fine-grained system. The effective speedup of these simulations amounts to a factor of about $10^4$. Additionally, the transferability of the coarse-grained model with respect to changes of the nanocolloid density is investigated. The results indicate that the model is transferable to systems with nanocolloid densities that differ by up to one order of magnitude from the density of the reference system.
△ Less
Submitted 15 November, 2018; v1 submitted 1 August, 2018;
originally announced August 2018.
-
Self-assembly of polymeric particles in Poiseuille flow: A hybrid Lattice Boltzmann / External Potential Dynamics simulation study
Authors:
Johannes Heuser,
G. J. Agur Sevink,
Friederike Schmid
Abstract:
We present a hybrid simulation method which allows one to study the dynamical evolution of self-assembling (co)polymer solutions in the presence of hydrodynamic interactions. The method combines an established dynamic density functional theory for polymers that accounts for the nonlocal character of chain dynamics at the level of the Rouse model, the external potential dynamics (EPD) model, with a…
▽ More
We present a hybrid simulation method which allows one to study the dynamical evolution of self-assembling (co)polymer solutions in the presence of hydrodynamic interactions. The method combines an established dynamic density functional theory for polymers that accounts for the nonlocal character of chain dynamics at the level of the Rouse model, the external potential dynamics (EPD) model, with an established Navier-Stokes solver, the Lattice Boltzmann (LB) method. We apply the method to study the self-assembly of nanoparticles and vesicles in two-dimensional copolymer solutions in a typical microchannel Poiseuille flow profile. The simulations start from fully mixed systems which are suddenly quenched below the spinodal line. In order to isolate effects caused by walls, we use a reverse Poiseuille flow geometry with periodic boundary conditions. We identify three stages of self assembly, i.e., initial spinodal decomposition, particle nucleation, and particle growth (ripening). We find that (i) In the presence of shear, the nucleation of droplets is delayed by an amount roughly proportional to the shear rate, (ii) Shear flow greatly increases the rates of particle fusions, (iii) in later stages of self-assembly, stronger shear flows may induce irreversible shape transformation {\em via} finger formation, in particular in vesicle systems. The combination of these effects lead to an accumulation of particles close to the center of the Poiseuille flow profile, and the polymeric matter has a double peak distribution centered around the flow maximum.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Simulating Copolymeric Nanoparticle Assembly in the Co-solvent Method: How Mixing Rates Control Final Particle Sizes and Morphologies
Authors:
Simon Kessler,
Klaus Drese,
Friederike Schmid
Abstract:
The self-assembly of copolymeric vesicles and micelles in micromixers is studied by External Potential Dynamics (EPD) simulations -- a dynamic density functional approach that explicitly accounts for the polymer architecture both at the level of thermodynamics and dynamics. Specifically, we focus on the co-solvent method, where nanoparticle precipitation is triggered by mixing a poor co-solvent in…
▽ More
The self-assembly of copolymeric vesicles and micelles in micromixers is studied by External Potential Dynamics (EPD) simulations -- a dynamic density functional approach that explicitly accounts for the polymer architecture both at the level of thermodynamics and dynamics. Specifically, we focus on the co-solvent method, where nanoparticle precipitation is triggered by mixing a poor co-solvent into a homogeneous copolymer solution in a micromixer. Experimentally, it has been reported that the flow rate in the micromixers influences the size of the resulting particles as well as their morphology: At small flow rates, vesicles dominate; with increasing flow rate, more and more micelles form, and the size of the particles decreases. Our simulation model is based on the assumption that the flow rate mainly sets the rate of mixing of solvent and co-solvent. The simulations reproduce the experimental observations at an almost quantitative level and provide insight into the underlying physical mechanisms: First, they confirm an earlier conjecture according to which the size control takes place in the earliest stage of the particle self-assembly, during the spinodal decomposition of polymers and solvent. Second, they reveal a crossover between different morphological regimes as a function of mixing rate. Hence they demonstrate that varying the mixing rate in a co-solvent setup is an effective way to control two key properties of drug delivery systems, their mean size and their morphology.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Modeling size controlled nanoparticle precipitation with the co-solvency method by spinodal decomposition
Authors:
Simon Kessler,
Friederike Schmid,
Klaus Drese
Abstract:
The co-solvency method is a method for the size controlled preparation of nanoparticles like polymersomes, where a poor co-solvent is mixed into a homogeneous copolymer solution to trigger precipitation of the polymer. The size of the resulting particles is determined by the rate of co-solvent addition. We use the Cahn-Hilliard equation with a Flory-Huggins free energy model to describe the precip…
▽ More
The co-solvency method is a method for the size controlled preparation of nanoparticles like polymersomes, where a poor co-solvent is mixed into a homogeneous copolymer solution to trigger precipitation of the polymer. The size of the resulting particles is determined by the rate of co-solvent addition. We use the Cahn-Hilliard equation with a Flory-Huggins free energy model to describe the precipitation of a polymer under changing solvent quality by applying a time dependent Flory-Huggins interaction parameter. The analysis focuses on the characteristic size R of polymer aggregates that form during the initial spinodal decomposition stage, and especially on how R depends on the rate s of solvent quality change. Both numerical results and a perturbation analysis predict a power law dependence $R \sim s^{-1/6}$, which is in agreement with power laws for the final particle sizes that have been reported from experiments and molecular dynamics simulations. Hence, our model results suggest that the nanoparticle size in size-controlled precipitation is essentially determined during the spinodal decomposition stage.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Anomalous Critical Slowdown at a First Order Phase Transition in Single Polymer Chains
Authors:
Shuangshuang Zhang,
Shuanhu Qi,
Leonid I. Klushin,
Alexander M. Skvortsov,
Dadong Yan,
Friederike Schmid
Abstract:
Using Brownian Dynamics, we study the dynamical behavior of a polymer grafted onto an adhesive surface close to the mechanically induced adsorption-stretching transition. Even though the transition is first order, (in the infinite chain length limit, the stretching degree of the chain jumps discontinuously), the characteristic relaxation time is found to grow according to a power law as the transi…
▽ More
Using Brownian Dynamics, we study the dynamical behavior of a polymer grafted onto an adhesive surface close to the mechanically induced adsorption-stretching transition. Even though the transition is first order, (in the infinite chain length limit, the stretching degree of the chain jumps discontinuously), the characteristic relaxation time is found to grow according to a power law as the transition point is approached. We present a dynamic effective interface model which reproduces these observations and provides an excellent quantitaive description of the simulations data. The generic nature of the theoretical model suggests that the unconventional mixing of features that are characteristic for first-order transitions (a jump in an order parameter) and features that are characteristic of critical points (anomalous slowdown) may be a common phenomenon in force-driven phase transitions of macromolecules.
△ Less
Submitted 2 March, 2018;
originally announced March 2018.
-
Curvature as a guiding field for patterns in thin block copolymer films
Authors:
Giang Thi Vu,
Anabella A. Abate,
Leopoldo R. Gómez,
Aldo D. Pezzutti,
Richard A. Register,
Daniel A. Vega,
Friederike Schmid
Abstract:
Experimental data on thin films of cylinder-forming block copolymers (BC) -- free-standing BC membranes as well as supported BC films -- strongly suggest that the local orientation of the BC patterns is coupled to the geometry in which the patterns are embedded. We analyze this phenomenon using general symmetry considerations and numerical self-consistent field studies of curved BC films in cylind…
▽ More
Experimental data on thin films of cylinder-forming block copolymers (BC) -- free-standing BC membranes as well as supported BC films -- strongly suggest that the local orientation of the BC patterns is coupled to the geometry in which the patterns are embedded. We analyze this phenomenon using general symmetry considerations and numerical self-consistent field studies of curved BC films in cylindrical geometry. The stability of the films against curvature-induced dewetting is also analyzed. In good agreement with experiments, we find that the BC cylinders tend to align along the direction of curvature at high curvatures. At low curvatures, we identify a transition from perpendicular to parallel alignment in supported films, which is absent in free standing membranes. Hence both experiments and theory show that curvature can be used to manipulate and align BC patterns.
△ Less
Submitted 2 August, 2018; v1 submitted 27 February, 2018;
originally announced February 2018.
-
Phase transitions in single macromolecules: loop-stretch transition versus loop adsorption transition in end-grafted polymer chains
Authors:
Shuangshuang Zhang,
Shuanhu Qi,
Leonid I. Klushin,
Alexander M. Skvortsov,
Dadong Yan,
Friederike Schmid
Abstract:
We use Brownian dynamics simulations and analytical theory to compare two prominent types of single molecule transitions. One is the adsorption transition of a loop (a chain with two ends bound to an attractive substrate) driven by an attraction parameter $\varepsilon$, and the other is the loop-stretch transition in a chain with one end attached to a repulsive substrate, driven by an external end…
▽ More
We use Brownian dynamics simulations and analytical theory to compare two prominent types of single molecule transitions. One is the adsorption transition of a loop (a chain with two ends bound to an attractive substrate) driven by an attraction parameter $\varepsilon$, and the other is the loop-stretch transition in a chain with one end attached to a repulsive substrate, driven by an external end-force $F$ applied to the free end. Specifically, we compare the behavior of the respective order parameters of the transitions, i.e., the mean number of surface contacts in the case of the adsorption transition, and the mean position of the chain end in the case of the loop-stretch transition. Close to the transition points, both the static and the dynamic behavior of chains with different length $N$ are very well described by a scaling Ansatz with the scaling parameters $(\varepsilon - \varepsilon^*) N^φ$ (adsorption transition) and $(F-F^*) N^ν$ (loop-stretch transition), respectively, where $φ$ is the crossover exponent of the adsorption transition, and $ν$ the Flory exponent. We show that both the loop-stretch and the loop adsorption transitions provide an exceptional opportunity to construct explicit analytical expressions for the crossover functions which perfectly describe all simulation results on static properties in the finite-size scaling regime. Explicit crossover functions are based on the Ansatz for the analytical form of the order parameter distributions at the respective transition points. In contrast to the close similarity in equilibrium static behavior, the dynamic relaxation at the two transitions shows qualitative differences, especially in the strongly ordered regimes.
△ Less
Submitted 2 March, 2018; v1 submitted 14 December, 2017;
originally announced December 2017.
-
Critical behavior of active Brownian particles
Authors:
Jonathan Tammo Siebert,
Florian Dittrich,
Friederike Schmid,
Kurt Binder,
Thomas Speck,
Peter Virnau
Abstract:
We study active Brownian particles as a paradigm for genuine non-equilibrium phase transitions. Access to the critical point in computer simulations is obstructed by the fact that the density is conserved. We propose a modification of sampling finite-size fluctuations and successfully test this method for the 2D Ising model. Using this model allows us to determine accurately the critical point of…
▽ More
We study active Brownian particles as a paradigm for genuine non-equilibrium phase transitions. Access to the critical point in computer simulations is obstructed by the fact that the density is conserved. We propose a modification of sampling finite-size fluctuations and successfully test this method for the 2D Ising model. Using this model allows us to determine accurately the critical point of two dimensional active Brownian particles at $\text{Pe}_{\text{cr}}=40(2)$, $φ_{\text{cr}}=0.597(3)$. Based on this estimate, we study the corresponding critical exponents $β$, $γ/ν$, and $ν$. Our results are incompatible with the 2D-Ising exponents, thus raising the question whether there exists a corresponding non-equilibrium universality class.
△ Less
Submitted 6 December, 2017;
originally announced December 2017.
-
Iterative Reconstruction of Memory Kernels
Authors:
Gerhard Jung,
Martin Hanke,
Friederike Schmid
Abstract:
In recent years, it has become increasingly popular to construct coarse-grained models with non-Markovian dynamics to account for an incomplete separation of time scales. One challenge of a systematic coarse-graining procedure is the extraction of the dynamical properties, namely, the memory kernel, from equilibrium all-atom simulations. In this article, we propose an iterative method for memory r…
▽ More
In recent years, it has become increasingly popular to construct coarse-grained models with non-Markovian dynamics to account for an incomplete separation of time scales. One challenge of a systematic coarse-graining procedure is the extraction of the dynamical properties, namely, the memory kernel, from equilibrium all-atom simulations. In this article, we propose an iterative method for memory reconstruction from dynamical correlation functions. Compared to previously proposed noniterative techniques, it ensures by construction that the target correlation functions of the original fine-grained systems are reproduced accurately by the coarse-grained system, regardless of time step and discretization effects. Furthermore, we also propose a new numerical integrator for generalized Langevin equations that is significantly more accurate than the more commonly used generalization of the velocity Verlet integrator. We demonstrate the performance of the above-described methods using the example of backflow-induced memory in the Brownian diffusion of a single colloid. For this system, we are able to reconstruct realistic coarse-grained dynamics with time steps about 200 times larger than those used in the original molecular dynamics simulations.
△ Less
Submitted 22 September, 2017;
originally announced September 2017.
-
Frequency-dependent Hydrodynamic Interaction Between Two Solid Spheres
Authors:
Gerhard Jung,
Friederike Schmid
Abstract:
Hydrodynamic interactions play an important role in many areas of soft matter science. In simulations with implicit solvent, various techniques such as Brownian or Stokesian dynamics explicitly include hydrodynamic interactions a posteriori by using hydrodynamic diffusion tensors derived from the Stokes equation. However, this equation assumes the interaction to be instantaneous which is an ideali…
▽ More
Hydrodynamic interactions play an important role in many areas of soft matter science. In simulations with implicit solvent, various techniques such as Brownian or Stokesian dynamics explicitly include hydrodynamic interactions a posteriori by using hydrodynamic diffusion tensors derived from the Stokes equation. However, this equation assumes the interaction to be instantaneous which is an idealized approximation and only valid on long time scales. In the present paper, we go one step further and analyze the time-dependence of hydrodynamic interactions in a compressible fluid on the basis of the linearized Navier-Stokes equation. The theoretical results show that the compressibility of the fluid has a significant impact on frequency-dependent pair interactions.
The predictions of the hydrodynamic theory are compared to molecular dynamics simulations of two solid spheres in a Lennard-Jones fluid. For this system we reconstruct memory functions by extending the inverse Volterra technique. The simulation data agree very well with the theory, therefore, the theory can be used to implement dynamically consistent hydrodynamic interactions in the increasingly popular field of non-Markovian modeling.
△ Less
Submitted 15 November, 2018; v1 submitted 22 September, 2017;
originally announced September 2017.
-
Dynamic density functional theories for inhomogeneous polymer systems compared to Brownian dynamics simulations
Authors:
Shuanhu Qi,
Friederike Schmid
Abstract:
Dynamic density functionals (DDFs) are popular tools for studying the dynamical evolution of inhomogeneous polymer systems. Here, we present a systematic evaluation of a set of diffusive DDF theories by comparing their predictions with data from particle-based Brownian dynamics (BD) simulations for two selected problems: Interface broadening in compressible A/B homopolymer blends after a sudden ch…
▽ More
Dynamic density functionals (DDFs) are popular tools for studying the dynamical evolution of inhomogeneous polymer systems. Here, we present a systematic evaluation of a set of diffusive DDF theories by comparing their predictions with data from particle-based Brownian dynamics (BD) simulations for two selected problems: Interface broadening in compressible A/B homopolymer blends after a sudden change of the incompatibility parameter, and microphase separation in compressible A:B diblock copolymer melts. Specifically, we examine (i) a local dynamics model, where monomers are taken to move independently from each other, (ii) a nonlocal "chain dynamics" model, where monomers move jointly with correlation matrix given by the local chain correlator, and (iii,iv) two popular approximations to (ii), namely (iii) the Debye dynamics model, where the chain correlator is approximated by its value in a homogeneous system, and (iv) the computationally efficient "external potential dynamics" (EPD) model. With the exception of EPD, the value of the compressibility parameter has little influence on the results. In the interface broadening problem, the chain dynamics model reproduces the BD data best. However, the closely related EPD model produces large spurious artefacts. These artefacts disappear when the blend system becomes incompressible. In the microphase separation problem, the predictions of the nonlocal models (ii-iv) agree with each other and significantly overestimate the ordering time, whereas the local model (i) underestimates it. We attribute this to the multiscale character of the ordering process, which involves both local and global chain rearrangements. To account for this, we propose a mixed local/nonlocal DDF scheme which quantitatively reproduces all BD simulation data considered here.
△ Less
Submitted 18 November, 2017; v1 submitted 21 September, 2017;
originally announced September 2017.
-
Hybrid Particle-Continuum Simulations Coupling Brownian Dynamics and Local Dynamic Density Functional Theory
Authors:
Shuanhu Qi,
Friederike Schmid
Abstract:
We present a multiscale hybrid particle-field scheme for the simulation of relaxation and diffusion behavior of soft condensed matter systems. It combines particle-based Brownian dynamics and field-based local dynamics in an adaptive sense such that particles can switch their level of resolution on the fly. The switching of resolution is controlled by a tuning function which can be chosen at will…
▽ More
We present a multiscale hybrid particle-field scheme for the simulation of relaxation and diffusion behavior of soft condensed matter systems. It combines particle-based Brownian dynamics and field-based local dynamics in an adaptive sense such that particles can switch their level of resolution on the fly. The switching of resolution is controlled by a tuning function which can be chosen at will according to the geometry of the system. As an application, the hybrid scheme is used to study the kinetics of interfacial broadening of a polymer blend, and is validated by comparing the results to the predictions from pure Brownian dynamics and pure local dynamics calculations.
△ Less
Submitted 5 September, 2017;
originally announced September 2017.
-
Protein corona composition of PEGylated nanoparticles correlates strongly with amino acid composition of protein surface
Authors:
Giovanni Settanni,
Jiajia Zhou,
Tongchuan Suo,
Susanne Schöttler,
Katharina Landfester,
Friederike Schmid,
Volker Mailänder
Abstract:
Extensive molecular dynamics simulations reveal that the interactions between proteins and poly(ethylene glycol)(PEG) can be described in terms of the surface composition of the proteins. PEG molecules accumulate around non-polar residues while avoiding polar ones. A solvent-accessible-surface-area model of protein adsorption on PEGylated nanoparticles accurately fits a large set of data on the co…
▽ More
Extensive molecular dynamics simulations reveal that the interactions between proteins and poly(ethylene glycol)(PEG) can be described in terms of the surface composition of the proteins. PEG molecules accumulate around non-polar residues while avoiding polar ones. A solvent-accessible-surface-area model of protein adsorption on PEGylated nanoparticles accurately fits a large set of data on the composition of the protein corona recently obtained by label-free proteomic mass spectrometry.
△ Less
Submitted 28 December, 2016;
originally announced December 2016.
-
Polydisperse polymer brushes: internal structure, critical behavior, and interaction with flow
Authors:
Shuanhu Qi,
Leonid I. Klushin,
Alexander M. Skvortsov,
Friederike Schmid
Abstract:
We study the effect of polydispersity on the structure of polymer brushes by analytical theory, a numerical self-consistent field approach, and Monte Carlo simulations. The polydispersity is represented by the Schulz-Zimm chain-length distribution. We specifically focus on three different polydispersities representing sharp, moderate and extremely wide chain length distributions and derive explici…
▽ More
We study the effect of polydispersity on the structure of polymer brushes by analytical theory, a numerical self-consistent field approach, and Monte Carlo simulations. The polydispersity is represented by the Schulz-Zimm chain-length distribution. We specifically focus on three different polydispersities representing sharp, moderate and extremely wide chain length distributions and derive explicit analytical expressions for the chain end distributions in these brushes. The results are in very good agreement with numerical data obtained with self-consistent field calculations and Monte Carlo simulations. With increasing polydispersity, the brush density profile changes from convex to concave, and for given average chain length $N_n$ and grafting density $σ$, the brush height $H$ is found to scale as $(H/H_{\mathrm{mono}}-1)\propto(N_w/N_n-1)^{1/2}$ over a wide range of polydispersity indices $N_w/N_n$ (here $H_{\mathrm{mono}}$ is the height of the corresponding monodisperse brush. Chain end fluctuations are found to be strongly suppressed already at very small polydispersity. Based on this observation, we introduce the concept of the brush as a near-critical system with two parameters (scaling variables), $(N_{n}σ^{2/3})^{-1}$ and $(N_w/N_n-1)^{1/2}$, controlling the distance from the critical point. This approach provides a good description of the simulation data. Finally we study the hydrodynamic penetration length $l_\mathrm{p}$ for brush-coated surfaces in flow. We find that it generally increases with polydispersity. The scaling behavior crosses over from $l_\mathrm{p}\sim N_\mathrm{n}^{1/2}σ^{-1/6}$ for monodisperse and weakly polydisperse brushes to $l_\mathrm{p}\sim N_{n}^{2/3}$ for strongly polydisperse brushes.
△ Less
Submitted 4 December, 2016;
originally announced December 2016.
-
Physical mechanisms of micro- and nanodomain formation in multicomponent lipid membranes
Authors:
Friederike Schmid
Abstract:
This article summarizes a variety of physical mechanisms proposed in the literature, which can generate micro- and nanodomains in multicomponent lipid bilayers and biomembranes. It mainly focusses on lipid-driven mechanisms that do not involve direct protein-protein interactions. Specifically, it considers (i) equilibrium mechanisms based on lipid-lipid phase separation such as critical cluster fo…
▽ More
This article summarizes a variety of physical mechanisms proposed in the literature, which can generate micro- and nanodomains in multicomponent lipid bilayers and biomembranes. It mainly focusses on lipid-driven mechanisms that do not involve direct protein-protein interactions. Specifically, it considers (i) equilibrium mechanisms based on lipid-lipid phase separation such as critical cluster formation close to critical points, and multiple domain formation in curved geometries, (ii) equilibrium mechanisms that stabilize two-dimensional microemulsions, such as the effect of linactants and the effect of curvature-composition coupling in bilayers and monolayers, and (iii) non-equilibrium mechanisms induced by the interaction of a biomembrane with the cellular environment, such as membrane recycling and the pinning effects of the cytoplasm. Theoretical predictions are discussed together with simulations and experiments. The presentation is guided by the theory of phase transitions and critical phenomena, and the appendix summarizes the mathematical background in a concise way within the framework of the Ginzburg-Landau theory.
△ Less
Submitted 13 November, 2016;
originally announced November 2016.
-
A hybrid particle-continuum resolution method and its application to a homopolymer solution
Authors:
Shuanhu Qi,
Hans Behringer,
Thorsten Raasch,
Friederike Schmid
Abstract:
We discuss in detail a recently proposed hybrid particle-continuum scheme for complex fluids and evaluate it at the example of a confined homopolymer solution in slit geometry. The hybrid scheme treats polymer chains near the impenetrable walls as particles kee** the configuration details, and chains in the bulk region as continuous density fields. Polymers can switch resolutions on the fly, con…
▽ More
We discuss in detail a recently proposed hybrid particle-continuum scheme for complex fluids and evaluate it at the example of a confined homopolymer solution in slit geometry. The hybrid scheme treats polymer chains near the impenetrable walls as particles kee** the configuration details, and chains in the bulk region as continuous density fields. Polymers can switch resolutions on the fly, controlled by an inhomogeneous tuning function. By properly choosing the tuning function, the representation of the system can be adjusted to reach an optimal balance between physical accuracy and computational efficiency. The hybrid simulation reproduces the results of a reference particle simulation and is significantly faster (about a factor of 3.5 in our application example).
△ Less
Submitted 27 October, 2016;
originally announced October 2016.
-
Computing bulk and shear viscosities from simulations of fluids with dissipative and stochastic interactions
Authors:
Gerhard Jung,
Friederike Schmid
Abstract:
Exact values for bulk and shear viscosity are important to characterize a fluid and they are a necessary input for a continuum description. Here we present two novel methods to compute bulk viscosities by non-equilibrium molecular dynamics (NEMD) simulations of steady-state systems with periodic boundary conditions -- one based on frequent particle displacements and one based on the application of…
▽ More
Exact values for bulk and shear viscosity are important to characterize a fluid and they are a necessary input for a continuum description. Here we present two novel methods to compute bulk viscosities by non-equilibrium molecular dynamics (NEMD) simulations of steady-state systems with periodic boundary conditions -- one based on frequent particle displacements and one based on the application of external bulk forces with an inhomogeneous force profile.
In equilibrium simulations, viscosities can be determined from the stress tensor fluctuations via Green-Kubo relations; however, the correct incorporation of random and dissipative forces is not obvious. We discuss different expressions proposed in the literature and test them at the example of a dissipative particle dynamics (DPD) fluid.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
Complex Formation between Polyelectrolytes and Oppositely Charged Oligoelectrolytes
Authors:
Jiajia Zhou,
Matthias Barz,
Friederike Schmid
Abstract:
We study the complex formation between one long polyanion chain and many short oligocation chains by computer simulations. We employ a coarse-grained bead-spring model for the polyelectrolyte chains, and model explicitly the small salt ions. We systematically vary the concentration and the length of the oligocation, and examine how the oligocations affects the chain conformation, the static struct…
▽ More
We study the complex formation between one long polyanion chain and many short oligocation chains by computer simulations. We employ a coarse-grained bead-spring model for the polyelectrolyte chains, and model explicitly the small salt ions. We systematically vary the concentration and the length of the oligocation, and examine how the oligocations affects the chain conformation, the static structure factor, the radial and axial distribution of various charged species, and the number of bound ions in the complex. At low oligocation concentration, the polyanion has an extended structure. Upon increasing the oligocation concentration, the polyanion chain collapses and forms a compact globule, but the complex still carries a net negative charge. Once the total charge of the oligocations is equal to that of the polyanion, the collapse stops and is replaced by a slow expansion. In this regime, the net charge on the complexes is positive or neutral, depending on the microion concentration in solution. The expansion can be explained by the reduction of the oligocation bridging. We find that the behavior and the structure of the complex are largely independent of the length of oligocations, and very similar to that observed when replacing the oligocations by multivalent salt cations, and conclude that the main driving force kee** the complex together is the release of monovalent counterions and coions. We speculate on the implications of this finding for the problem of controlled oligolyte release and oligolyte substitution.
△ Less
Submitted 6 April, 2016;
originally announced April 2016.
-
Collective behavior of quorum-sensing run-and-tumble particles in confinement
Authors:
Markus Rein,
Nike Heinß,
Friederike Schmid,
Thomas Speck
Abstract:
We study a generic model for quorum-sensing bacteria in circular confinement. Every bacterium produces signaling molecules, the local concentration of which triggers a response when a certain threshold is reached. If this response lowers the motility then an aggregation of bacteria occurs, which differs fundamentally from standard motility-induced phase separation due to the long-ranged nature of…
▽ More
We study a generic model for quorum-sensing bacteria in circular confinement. Every bacterium produces signaling molecules, the local concentration of which triggers a response when a certain threshold is reached. If this response lowers the motility then an aggregation of bacteria occurs, which differs fundamentally from standard motility-induced phase separation due to the long-ranged nature of the concentration of signal molecules. We analyze this phenomenon analytically and by numerical simulations employing two different protocols leading to stationary cluster and ring morphologies, respectively.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Statistical properties of linear-hyperbranched graft copolymers prepared via "hypergrafting" of AB_m monomers from linear B-functional core chains: A Molecular Dynamics simulation
Authors:
Hauke Rabbel,
Holger Frey,
Friederike Schmid
Abstract:
The reaction of $AB_m$ monomers (m=2,3) with a multifunctional B_f-type polymer chain ("hypergrafting") is studied by coarse-grained molecular dynamics simulations. The $AB_m$ monomers are hypergrafted using the slow monomer addition strategy. Fully dendronized, i.e., perfectly branched polymers are also simulated for comparison. The degree of branching DB of the molecules obtained with the "hyper…
▽ More
The reaction of $AB_m$ monomers (m=2,3) with a multifunctional B_f-type polymer chain ("hypergrafting") is studied by coarse-grained molecular dynamics simulations. The $AB_m$ monomers are hypergrafted using the slow monomer addition strategy. Fully dendronized, i.e., perfectly branched polymers are also simulated for comparison. The degree of branching DB of the molecules obtained with the "hypergrafting" process critically depends on the rate with which monomers attach to inner monomers compared to terminal monomers. This ratio is more favorable if the $AB_m$ monomers have lower reactivity, since the free monomers then have time to diffuse inside the chain. Configurational chain properties are also determined, showing that the stretching of the polymer backbone as a consequence of the "hypergrafting" procedure is much less pronounced than for perfectly dendronized chains. Furthermore, we analyze the scaling of various quantities with molecular weight M for large M (M>100). The Wiener index scales as $M^2.3$, which is intermediate between linear chains ($M^3$) and perfectly branched polymers ($M^2 \ln(M)$). The polymer size, characterized by the radius of gyration $R_g$ or the hydrodynamic radius $R_h$, is found to scale as $R_{g,h}~M^ν$ with $ν~0.38$, which lies between the exponent of diffusion limited aggregation ($ν=0.4$) and the mean-field exponent predicted by Konkolewicz and coworkers ($ν=0.33$).
△ Less
Submitted 6 November, 2015; v1 submitted 28 October, 2015;
originally announced October 2015.
-
Interplay of curvature-induced micro- and nanodomain structures in multicomponent lipid bilayers
Authors:
Leonie Brodbek,
Friederike Schmid
Abstract:
We discuss different mechanisms for curvature-induced domain formation in multicomponent lipid membranes and present a theoretical model that allows us to study the interplay between the domains. The model represents the membrane by two coupled monolayers, which each carry an additional order parameter field describing the local lipid composition. The spontaneous curvature of each monolayer is cou…
▽ More
We discuss different mechanisms for curvature-induced domain formation in multicomponent lipid membranes and present a theoretical model that allows us to study the interplay between the domains. The model represents the membrane by two coupled monolayers, which each carry an additional order parameter field describing the local lipid composition. The spontaneous curvature of each monolayer is coupled to the local composition, moreover, the lipid compositions on opposing monolayers are coupled to each other. Using this model, we calculate the phase behavior of the bilayer in mean-field approximation. The resulting phase diagrams are surprisingly complex and reveal a variety of phases and phase transitions, including a decorated microdomain phase where nanodomains are aligned along the microdomain boundaries. Our results suggest that external membrane tension can be used to control the lateral organization of nanodomains (which might be associated with lipid "rafts") in a multicomponent lipid bilayer.
△ Less
Submitted 11 November, 2015; v1 submitted 17 October, 2015;
originally announced October 2015.
-
Computer simulations of single particles in external electric fields
Authors:
Jiajia Zhou,
Friederike Schmid
Abstract:
Applying electric fields is an attractive way to control and manipulate single particles or molecules, e.g., in lab-on-a-chip devices. However, the response of nanosize objects in electrolyte solution to external fields is far from trivial. It is the result of a variety of dynamical processes taking place in the ion cloud surrounding charged particles and in the bulk electrolyte, and it is governe…
▽ More
Applying electric fields is an attractive way to control and manipulate single particles or molecules, e.g., in lab-on-a-chip devices. However, the response of nanosize objects in electrolyte solution to external fields is far from trivial. It is the result of a variety of dynamical processes taking place in the ion cloud surrounding charged particles and in the bulk electrolyte, and it is governed by an intricate interplay of electrostatic and hydrodynamic interactions. Already systems composed of one single particle in electrolyte solution exhibit a complex dynamical behaviour. In this review, we discuss recent coarse-grained simulations that have been performed to obtain a molecular-level understanding of the dynamic and dielectric response of single particles and single macromolecules to external electric fields. We address both the response of charged particles to constant fields (DC fields), which can be characterized by an electrophoretic mobility, and the dielectric response of both uncharged and charged particles to alternating fields (AC fields), which is described by a complex polarizability. Furthermore, we give a brief survey of simulation algorithms and highlight some recent developments.
△ Less
Submitted 20 July, 2015;
originally announced July 2015.
-
Stimuli-responsive brushes with active minority components: Monte Carlo study and analytical theory
Authors:
Shuanhu Qi,
Leonid I. Klushin,
Alexander M. Skvortsov,
Alexey A. Polotsky,
Friederike Schmid
Abstract:
Using a combination of analytical theory, Monte Carlo simulations, and three dimensional self-consistent field calculations, we study the equilibrium properties and the switching behavior of adsorption-active polymer chains included in a homopolymer brush. The switching transition is driven by a conformational change of a small fraction of minority chains, which are attracted by the substrate. Dep…
▽ More
Using a combination of analytical theory, Monte Carlo simulations, and three dimensional self-consistent field calculations, we study the equilibrium properties and the switching behavior of adsorption-active polymer chains included in a homopolymer brush. The switching transition is driven by a conformational change of a small fraction of minority chains, which are attracted by the substrate. Depending on the strength of the attractive interaction, the minority chains assume one of two states: An exposed state characterized by a stem-crown-like conformation, and an adsorbed state characterized by a flat two-dimensional structure. Comparing the Monte Carlo simulations, which use an Edwards-type Hamiltonian with density dependent interactions, with the predictions from self-consistent-field theory based on the same Hamiltonian, we find that thermal density fluctuations affect the system in two different ways. First, they renormalize the excluded volume interaction parameter $v_\mathrm{\tiny bare}$ inside the brush. The properties of the brushes can be reproduced by self-consistent field theory if one replaces $v_\mathrm{\tiny bare}$ by an effective parameter $v_{\mathrm{\tiny eff}}$, where the ratio of second virial coefficients $B_{\mathrm{\tiny eff}}/B_\mathrm{\tiny bare}$ depends on the range of monomer interactions, but not on the grafting density, the chain length, and $v_\mathrm{\tiny bare}$. Second, density fluctuations affect the conformations of chains at the brush surface and have a favorable effect on the characteristics of the switching transition: In the interesting regime where the transition is sharp, they reduce the free energy barrier between the two states significantly. The scaling behavior of various quantities is also analyzed and compared with analytical predictions.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
An efficient dissipative particle dynamics-based algorithm for simulating electrolyte solutions
Authors:
Stefan Medina,
Jiajia Zhou,
Zhen-Gang Wang,
Friederike Schmid
Abstract:
We propose an efficient simulation algorithm based on the dissipative particle dynamics (DPD) method for studying electrohydrodynamic phenomena in electrolyte fluids. The fluid flow is mimicked with DPD particles while the evolution of the concentration of the ionic species is described using Brownian pseudo particles. The method is designed especially for systems with high salt concentrations, as…
▽ More
We propose an efficient simulation algorithm based on the dissipative particle dynamics (DPD) method for studying electrohydrodynamic phenomena in electrolyte fluids. The fluid flow is mimicked with DPD particles while the evolution of the concentration of the ionic species is described using Brownian pseudo particles. The method is designed especially for systems with high salt concentrations, as explicit treatment of the salt ions becomes computationally expensive. For illustration, we apply the method to electro-osmotic flow over patterned, superhydrophobic surfaces. The results are in good agreement with recent theoretical predictions.
△ Less
Submitted 1 January, 2015; v1 submitted 16 December, 2014;
originally announced December 2014.