-
Designing metainterfaces with specified friction laws
Authors:
Antoine Aymard,
Emilie Delplanque,
Davy Dalmas,
Julien Scheibert
Abstract:
Many devices, including touchscreens and robotic hands, involve frictional contacts. Optimizing these devices requires fine control of the interface's friction law. We lack systematic methods to create dry contact interfaces whose frictional behavior satisfies preset specifications. We propose a generic surface design strategy to prepare dry rough interfaces that have predefined relationships betw…
▽ More
Many devices, including touchscreens and robotic hands, involve frictional contacts. Optimizing these devices requires fine control of the interface's friction law. We lack systematic methods to create dry contact interfaces whose frictional behavior satisfies preset specifications. We propose a generic surface design strategy to prepare dry rough interfaces that have predefined relationships between normal and friction forces. Such metainterfaces circumvent the usual multiscale challenge of tribology by considering simplified surface topographies as assemblies of spherical asperities. Optimizing the individual asperities' heights enables specific friction laws to be targeted. Through various centimeter-scaled elastomer-glass metainterfaces, we illustrate three types of achievable friction laws, including linear laws with a specified friction coefficient and unusual nonlinear laws. This design strategy represents a scale- and material-independent, chemical-free pathway toward energy-saving and adaptable smart interfaces.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Adhesion in soft contacts is minimum beyond a critical shear displacement
Authors:
C. Oliver,
D. Dalmas,
J. Scheibert
Abstract:
The most direct measurement of adhesion is the pull-off force, i.e. the tensile force necessary to separate two solids in contact. For a given interface, it depends on various experimental parameters, including separation speed, contact age and maximum loading force. Here, using smooth contacts between elastomer spheres and rigid plates, we show that the pull-off force also varies if the contact i…
▽ More
The most direct measurement of adhesion is the pull-off force, i.e. the tensile force necessary to separate two solids in contact. For a given interface, it depends on various experimental parameters, including separation speed, contact age and maximum loading force. Here, using smooth contacts between elastomer spheres and rigid plates, we show that the pull-off force also varies if the contact is sheared prior to separation. For shear displacements below a critical valueabout 10% of that necessary to yield gross sliding, the pull-off force steadily decreases as shear increases. For larger shear, the pull-off force remains constant, at a residual value 10%--15% of its initial value. Combining force measurements and in situ imaging, we show how the unloading path leading to contact separation is modified by the initial shear. In particular, we find that the residual pull-off force prevails if the contact reaches full sliding during unloading. Based on those observations, a first modeling attempt of the critical shear displacement is proposed,involving a competition between jump instability and transition to sliding. Overall, those results offer new insights into the interplay between adhesion and friction, provide new constraints on adhesion measurements and challenge existing adhesive models. They will be useful wherever soft contacts undergo both normal and shear stresses, including tire grip, soft robotics, haptics and animal locomotion.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
An asperity-based statistical model for the adhesive friction of elastic nominally flat rough contact interfaces
Authors:
Yang Xu,
Julien Scheibert,
Nikolaj Gadegaard,
Daniel M. Mulvihill
Abstract:
Contact mechanics-based models for the friction of nominally flat rough surfaces have not been able to adequately capture certain key experimentally observed phenomenona, such as the transition from a static friction peak to a lower level of sliding friction and the shear-induced contact area reduction that has been observed in the pre-sliding regime especially for soft materials. Here, we propose…
▽ More
Contact mechanics-based models for the friction of nominally flat rough surfaces have not been able to adequately capture certain key experimentally observed phenomenona, such as the transition from a static friction peak to a lower level of sliding friction and the shear-induced contact area reduction that has been observed in the pre-sliding regime especially for soft materials. Here, we propose a statistical model based on physically-rooted contact mechanics laws describing the micromechanics of individual junctions. The model considers the quasi-static tangential loading, up to full sliding, of the contact between a smooth rigid flat surface and a nominally flat linear elastic rough surface comprising random independent spherical asperities, and accounts for the coupling between adhesion and friction at the micro-junction level. The model qualitatively reproduces both the macroscopic shear-induced contact area reduction and, remarkably, the static friction peak without the need to explicitly introduce two different friction levels. It also demonstrates how the static friction peak and contact area evolution depend on the normal load and certain key microscale interface properties such as surface energy, mode mixity and frictional shear strength. "Tougher" interfaces (i.e. with larger surface energy and smaller mode mixity parameter) are shown to result in a larger real contact area and a more pronounced static friction peak. Overall, this work provides important insights about how key microscale properties operating at the asperity level can combine with the surface statistics to reproduce important macroscopic responses observed in rough frictionalsoft contact experiments.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Finite deformations govern the anisotropic shear-induced area reduction of soft elastic contacts
Authors:
J. Lengiewicz,
M. de Souza,
M. Lahmar,
C. Courbon,
D. Dalmas,
S. Stupkiewicz,
J. Scheibert
Abstract:
Solid contacts involving soft materials are important in mechanical engineering or biomechanics. Experimentally, such contacts have been shown to shrink significantly under shear, an effect which is usually explained using adhesion models. Here we show that quantitative agreement with recent high-load experiments can be obtained, with no adjustable parameter, using a non-adhesive model, provided t…
▽ More
Solid contacts involving soft materials are important in mechanical engineering or biomechanics. Experimentally, such contacts have been shown to shrink significantly under shear, an effect which is usually explained using adhesion models. Here we show that quantitative agreement with recent high-load experiments can be obtained, with no adjustable parameter, using a non-adhesive model, provided that finite deformations are taken into account. Analysis of the model uncovers the basic mechanisms underlying shear-induced area reduction, local contact lifting being the dominant one. We confirm experimentally the relevance of all those mechanisms, by tracking the shear-induced evolution of tracers inserted close to the surface of a smooth elastomer sphere in contact with a smooth glass plate. Our results suggest that finite deformations are an alternative to adhesion, when interpreting a variety of sheared contact experiments involving soft materials.
△ Less
Submitted 19 June, 2020; v1 submitted 5 May, 2020;
originally announced May 2020.
-
Onset of sliding of elastomer multicontacts: failure of a model of independent asperities to match experiments
Authors:
Julien Scheibert,
Riad Sahli,
Michel Peyrard
Abstract:
Modelling of rough frictional interfaces is often based on asperity models, in which the individual behaviour of individual microjunctions is assumed. In the absence of local measurements at the microjunction scale, quantitative comparison of such models with experiments is usually based only on macroscopic quantities, like the total tangential load resisted by the interface. Recently however, a n…
▽ More
Modelling of rough frictional interfaces is often based on asperity models, in which the individual behaviour of individual microjunctions is assumed. In the absence of local measurements at the microjunction scale, quantitative comparison of such models with experiments is usually based only on macroscopic quantities, like the total tangential load resisted by the interface. Recently however, a new experimental dataset was presented on the onset of sliding of rough elastomeric interfaces, which includes local measurements of the contact area of the individual microjunctions. Here, we use this more comprehensive dataset to test the possibility of quantitatively matching the measurements with a model of independent asperities, enriched with experimental information about the area of microjunctions and its evolution under shear. We show that, despite using parameter values and behaviour laws constrained and inspired by experiments, our model does not quantitatively match the macroscopic measurements. We discuss the possible origins of this failure .
△ Less
Submitted 6 May, 2020; v1 submitted 15 November, 2019;
originally announced November 2019.
-
Shear-induced contact area anisotropy explained by a fracture mechanics model
Authors:
A. Papangelo,
J. Scheibert,
R. Sahli,
G. Pallares,
M. Ciavarella
Abstract:
This paper gives a theoretical analysis for the fundamental problem of anisotropy induced by shear forces onan adhesive contact, discussing the experimental data of the companion Letter. We present a fracture mechanicsmodel where two phenomenological mode-mixity functions are introduced to describe the weak couplingbetween modes I and II or I and III, which changes the effective toughness of the i…
▽ More
This paper gives a theoretical analysis for the fundamental problem of anisotropy induced by shear forces onan adhesive contact, discussing the experimental data of the companion Letter. We present a fracture mechanicsmodel where two phenomenological mode-mixity functions are introduced to describe the weak couplingbetween modes I and II or I and III, which changes the effective toughness of the interface. The mode-mixityfunctions have been interpolated using the data of a single experiment and then used to predict the behavior of thewhole set of experimental observations. The model extends an idea by Johnson and Greenwood, to solve purelymode I problems of adhesion in the presence of a nonaxisymmetric Hertzian geometry, to the case of ellipticalcontacts sheared along their major or minor axis. Equality between the stress intensity factors and their criticalvalues is imposed solely at the major and minor axes. We successfully validate our model against experimentaldata. The model predicts that the punch geometry will affect both the shape and the overall decay of the shearedcontact area.
△ Less
Submitted 7 June, 2019;
originally announced June 2019.
-
Shear-Induced Anisotropy in Rough Elastomer Contact
Authors:
R. Sahli,
G. Pallares,
A. Papangelo,
M. Ciavarella,
C. Ducottet,
N. Ponthus,
J. Scheibert
Abstract:
True contact between randomly rough solids consists of myriad individual micro-junctions. While their total area controls the adhesive friction force of the interface, other macroscopic features, including viscoelastic friction, wear, stiffness and electric resistance, also strongly depend on the size and shape of individual micro-junctions. Here we show that, in rough elastomer contacts, the shap…
▽ More
True contact between randomly rough solids consists of myriad individual micro-junctions. While their total area controls the adhesive friction force of the interface, other macroscopic features, including viscoelastic friction, wear, stiffness and electric resistance, also strongly depend on the size and shape of individual micro-junctions. Here we show that, in rough elastomer contacts, the shape of micro-junctions significantly varies as a function of the shear force applied to the interface. This process leads to a growth of anisotropy of the overall contact interface, which saturates in macroscopic sliding regime. We show that smooth sphere/plane contacts have the same shear-induced anisotropic behaviour as individual micro-junctions, with a common scaling law over four orders of magnitude in initial area. We discuss the physical origin of the observations in the light of a fracture-based adhesive contact mechanics model, described in the companion article, which captures the smooth sphere/plane measurements. Our results shed light on a generic, overlooked source of anisotropy in rough elastic contacts, not taken into account in current rough contact mechanics models.
△ Less
Submitted 7 June, 2019;
originally announced June 2019.
-
Steady-state propagation speed of rupture fronts along one-dimensional frictional interfaces
Authors:
David Skålid Amundsen,
Jørgen Kjoshagen Trømborg,
Kjetil Thøgersen,
Eytan Katzav,
Anders Malthe-Sørenssen,
Julien Scheibert
Abstract:
The rupture of dry frictional interfaces occurs through the propagation of fronts breaking the contacts at the interface. Recent experiments have shown that the velocities of these rupture fronts range from quasi-static velocities proportional to the external loading rate to velocities larger than the shear wave speed. The way system parameters influence front speed is still poorly understood. Her…
▽ More
The rupture of dry frictional interfaces occurs through the propagation of fronts breaking the contacts at the interface. Recent experiments have shown that the velocities of these rupture fronts range from quasi-static velocities proportional to the external loading rate to velocities larger than the shear wave speed. The way system parameters influence front speed is still poorly understood. Here we study steady-state rupture propagation in a one-dimensional (1D) spring-block model of an extended frictional interface, for various friction laws. With the classical Amontons--Coulomb friction law, we derive a closed-form expression for the steady-state rupture velocity as a function of the interfacial shear stress just prior to rupture. We then consider an additional shear stiffness of the interface and show that the softer the interface, the slower the rupture fronts. We provide an approximate closed form expression for this effect. We finally show that adding a bulk viscosity on the relative motion of blocks accelerates steady-state rupture fronts and we give an approximate expression for this effect. We demonstrate that the 1D results are qualitatively valid in 2D. Our results provide insights into the qualitative role of various key parameters of a frictional interface on its rupture dynamics. They will be useful to better understand the many systems in which spring-block models have proved adequate, from friction to granular matter and earthquake dynamics.
△ Less
Submitted 24 September, 2015; v1 submitted 4 September, 2015;
originally announced September 2015.
-
On the speed of fast and slow rupture fronts along frictional interfaces
Authors:
Jørgen Kjoshagen Trømborg,
Henrik Andersen Sveinsson,
Kjetil Thøgersen,
Julien Scheibert,
Anders Malthe-Sørenssen
Abstract:
The transition from stick to slip at a dry frictional interface occurs through the breaking of the junctions between the two contacting surfaces. Typically, interactions between the junctions through the bulk lead to rupture fronts propagating from weak and/or highly stressed regions, whose junctions break first. Experiments find rupture fronts ranging from quasi-static fronts with speeds proporti…
▽ More
The transition from stick to slip at a dry frictional interface occurs through the breaking of the junctions between the two contacting surfaces. Typically, interactions between the junctions through the bulk lead to rupture fronts propagating from weak and/or highly stressed regions, whose junctions break first. Experiments find rupture fronts ranging from quasi-static fronts with speeds proportional to external loading rates, via fronts much slower than the Rayleigh wave speed, and fronts that propagate near the Rayleigh wave speed, to fronts that travel faster than the shear wave speed. The mechanisms behind and selection between these fronts are still imperfectly understood. Here we perform simulations in an elastic 2D spring--block model where the frictional interaction between each interfacial block and the substrate arises from a set of junctions modeled explicitly. We find that a proportionality between material slip speed and rupture front speed, previously reported for slow fronts, actually holds across the full range of front speeds we observe. We revisit a mechanism for slow slip in the model and demonstrate that fast slip and fast fronts have a different, inertial origin. We highlight the long transients in front speed even in homogeneous interfaces, and we study how both the local shear to normal stress ratio and the local strength are involved in the selection of front type and front speed. Lastly, we introduce an experimentally accessible integrated measure of block slip history, the Gini coefficient, and demonstrate that in the model it is a good predictor of the history-dependent local static friction coefficient of the interface. These results will contribute both to building a physically-based classification of the various types of fronts and to identifying the important mechanisms involved in the selection of their propagation speed.
△ Less
Submitted 13 January, 2015;
originally announced January 2015.
-
Propagation Length of Self-healing Slip Pulses at the Onset of Sliding: A Toy Model
Authors:
Oleg Braun,
J Scheibert
Abstract:
Macroscopic sliding between two solids is triggered by the propagation of a micro-slip front along the frictional interface. In certain conditions, sliding is preceded by the propagation of aborted fronts, spanning only part of the contact interface. The selection of the characteristic size spanned by those so-called precursors remains poorly understood. Here, we introduce a 1D toy model of precur…
▽ More
Macroscopic sliding between two solids is triggered by the propagation of a micro-slip front along the frictional interface. In certain conditions, sliding is preceded by the propagation of aborted fronts, spanning only part of the contact interface. The selection of the characteristic size spanned by those so-called precursors remains poorly understood. Here, we introduce a 1D toy model of precursors between a slider and a track in which the fronts are quasi-static self-healing slip pulses. When the slider's thickness is large compared to the elastic correlation length and when the interfacial stiffness is small compared with the bulk stiffness, we provide an analytical solution for the length of the first precursor, Λ, and the shear stress field associated with it. These quantities are given as a function of the bulk material parameters, the frictional properties of the interface and the macroscopic loading conditions. Analytical results are in quantitative agreement with the numerical solution of the model. In contrast with previous models, our model predicts that Λ does not depend on the frictional breaking threshold of the interface. Our results should be relevant to the various systems in which self-healing slip pulses have been observed.
△ Less
Submitted 28 November, 2014;
originally announced December 2014.
-
History-dependent friction and slow slip from time-dependent microscopic junction laws studied in a statistical framework
Authors:
Kjetil Thøgersen,
Jørgen Kjoshagen Trømborg,
Julien Scheibert,
Henrik Andersen Sveinsson,
Anders Malthe-Sørenssen
Abstract:
To study the microscopic origins of friction, we build a framework to describe the collective behaviour of a large number of individual micro-junctions forming a macroscopic frictional interface. Each micro-junction can switch in time between two states: A pinned state characterized by a displacement-dependent force, and a slip** state characterized by a time-dependent force. Instead of tracking…
▽ More
To study the microscopic origins of friction, we build a framework to describe the collective behaviour of a large number of individual micro-junctions forming a macroscopic frictional interface. Each micro-junction can switch in time between two states: A pinned state characterized by a displacement-dependent force, and a slip** state characterized by a time-dependent force. Instead of tracking each micro-junction individually, the state of the interface is described by two coupled distributions for (i) the stretching of pinned junctions and (ii) the time spent in the slip** state. We show how this framework represents an overarching structure for important models existing in the friction literature. We then use it to study systematically the effect of the time-scale that controls the duration of the slip** state. We first find the steady-state friction force as a function of the sliding velocity. As the framework allows for a whole family of micro-junction behaviour laws, we show how these laws can be chosen to obtain monotonic (strengthening or weakening) or non-monotonic velocity dependence at the macroscale. By then considering transient situations, we predict that the macroscopic static friction coefficient is strongly influenced by the way the interface was prepared, in particular by the slip dynamics of the previous sliding event. We also show that slow slip spontaneously occurs in the framework for a wide range of behaviour laws.
△ Less
Submitted 11 June, 2014; v1 submitted 26 February, 2014;
originally announced February 2014.
-
Slow slip and the transition from fast to slow fronts in the rupture of frictional interfaces
Authors:
Jørgen Kjoshagen Trømborg,
Henrik Andersen Sveinsson,
Julien Scheibert,
Kjetil Thøgersen,
David Skålid Amundsen,
Anders Malthe-Sørenssen
Abstract:
The failure of the population of micro-junctions forming the frictional interface between two solids is central to fields ranging from biomechanics to seismology. This failure is mediated by the propagation along the interface of various types of rupture fronts, covering a wide range of velocities. Among them are so-called slow fronts, which are recently discovered fronts much slower than the mate…
▽ More
The failure of the population of micro-junctions forming the frictional interface between two solids is central to fields ranging from biomechanics to seismology. This failure is mediated by the propagation along the interface of various types of rupture fronts, covering a wide range of velocities. Among them are so-called slow fronts, which are recently discovered fronts much slower than the materials' sound speeds. Despite intense modelling activity, the mechanisms underlying slow fronts remain elusive. Here, we introduce a multi-scale model capable of reproducing both the transition from fast to slow fronts in a single rupture event and the short-time slip dynamics observed in recent experiments. We identify slow slip immediately following the arrest of a fast front as a phenomenon sufficient for the front to propagate further at a much slower pace. Whether slow fronts are actually observed is controlled both by the interfacial stresses and by the width of the local distribution of forces among micro-junctions. Our results show that slow fronts are qualitatively different from faster fronts. Since the transition from fast to slow fronts is potentially as generic as slow slip, we anticipate that it might occur in the wide range of systems in which slow slip has been reported, including seismic faults.
△ Less
Submitted 20 June, 2014; v1 submitted 19 February, 2014;
originally announced February 2014.
-
Damage mechanisms in the dynamic fracture of nominally brittle polymers
Authors:
Davy Dalmas,
Claudia Guerra,
Julien Scheibert,
Daniel Bonamy
Abstract:
Linear Elastic Fracture Mechanics (LEFM) provides a consistent framework to evaluate quantitatively the energy flux released to the tip of a growing crack. Still, the way in which the crack selects its velocity in response to this energy flux remains far from completely understood. To uncover the underlying mechanisms, we experimentally studied damage and dissipation processes that develop during…
▽ More
Linear Elastic Fracture Mechanics (LEFM) provides a consistent framework to evaluate quantitatively the energy flux released to the tip of a growing crack. Still, the way in which the crack selects its velocity in response to this energy flux remains far from completely understood. To uncover the underlying mechanisms, we experimentally studied damage and dissipation processes that develop during the dynamic failure of polymethylmethacrylate (PMMA), classically considered as the archetype of brittle amorphous materials. We evidenced a well-defined critical velocity along which failure switches from nominally-brittle to quasi-brittle, where crack propagation goes hand in hand with the nucleation and growth of microcracks. Via post-mortem analysis of the fracture surfaces, we were able to reconstruct the complete spatiotemporal microcracking dynamics with micrometer/nanosecond resolution. We demonstrated that the true local propagation speed of individual crack fronts is limited to a fairly low value, which can be much smaller than the apparent speed measured at the continuum-level scale. By coalescing with the main front, microcracks boost the macroscale velocity through an acceleration factor of geometrical origin. We discuss the key role of damage-related internal variables in the selection of macroscale fracture dynamics.
△ Less
Submitted 23 April, 2013;
originally announced April 2013.
-
Understanding fast macroscale fracture from microcrack post mortem patterns
Authors:
Claudia Guerra,
Julien Scheibert,
Daniel Bonamy,
Davy Dalmas
Abstract:
Dynamic crack propagation drives catastrophic solid failures. In many amorphous brittle materials, sufficiently fast crack growth involves small-scale, high-frequency microcracking damage localized near the crack tip. The ultra-fast dynamics of microcrack nucleation, growth and coalescence is inaccessible experimentally and fast crack propagation was therefore studied only as a macroscale average.…
▽ More
Dynamic crack propagation drives catastrophic solid failures. In many amorphous brittle materials, sufficiently fast crack growth involves small-scale, high-frequency microcracking damage localized near the crack tip. The ultra-fast dynamics of microcrack nucleation, growth and coalescence is inaccessible experimentally and fast crack propagation was therefore studied only as a macroscale average. Here, we overcome this limitation in polymethylmethacrylate, the archetype of brittle amorphous materials: We reconstruct the complete spatio-temporal microcracking dynamics, with micrometer / nanosecond resolution, through post mortem analysis of the fracture surfaces. We find that all individual microcracks propagate at the same low, load-independent, velocity. Collectively, the main effect of microcracks is not to slow down fracture by increasing the energy required for crack propagation, as commonly believed, but on the contrary to boost the macroscale velocity through an acceleration factor selected on geometric grounds. Our results emphasize the key role of damage-related internal variables in the selection of macroscale fracture dynamics.
△ Less
Submitted 29 March, 2012; v1 submitted 10 November, 2011;
originally announced November 2011.
-
Transition from static to kinetic friction: Insights from a 2D model
Authors:
Jørgen Trømborg,
Julien Scheibert,
David Skålid Amundsen,
Kjetil Thøgersen,
Anders Malthe-Sørenssen
Abstract:
We describe a 2D spring-block model for the transition from static to kinetic friction at an elastic slider/rigid substrate interface obeying a minimalistic friction law (Amontons-Coulomb). By using realistic boundary conditions, a number of previously unexplained experimental results on precursory micro-slip fronts are successfully reproduced. From the analysis of the interfacial stresses, we der…
▽ More
We describe a 2D spring-block model for the transition from static to kinetic friction at an elastic slider/rigid substrate interface obeying a minimalistic friction law (Amontons-Coulomb). By using realistic boundary conditions, a number of previously unexplained experimental results on precursory micro-slip fronts are successfully reproduced. From the analysis of the interfacial stresses, we derive a prediction for the evolution of the precursor length as a function of the applied loads, as well as an approximate relationship between microscopic and macroscopic friction coefficients. We show that the stress build-up due to both elastic loading and micro-slip-related relaxations depend only weakly on the underlying shear crack propagation dynamics. Conversely, crack speed depends strongly on both the instantaneous stresses and the friction coefficients, through a non-trivial scaling parameter.
△ Less
Submitted 14 July, 2011; v1 submitted 17 May, 2011;
originally announced May 2011.
-
Role of friction-induced torque in stick-slip motion
Authors:
Julien Scheibert,
Dag Kristian Dysthe
Abstract:
We present a minimal quasistatic 1D model describing the kinematics of the transition from static friction to stick-slip motion of a linear elastic block on a rigid plane. We show how the kinematics of both the precursors to frictional sliding and the periodic stick-slip motion are controlled by the amount of friction-induced torque at the interface. Our model provides a general framework to under…
▽ More
We present a minimal quasistatic 1D model describing the kinematics of the transition from static friction to stick-slip motion of a linear elastic block on a rigid plane. We show how the kinematics of both the precursors to frictional sliding and the periodic stick-slip motion are controlled by the amount of friction-induced torque at the interface. Our model provides a general framework to understand and relate a series of recent experimental observations, in particular the nucleation location of micro-slip instabilities and the build up of an asymmetric field of real contact area.
△ Less
Submitted 30 December, 2010; v1 submitted 11 June, 2010;
originally announced June 2010.
-
The role of fingerprints in the coding of tactile information probed with a biomimetic sensor
Authors:
J. Scheibert,
S. Leurent,
A. Prevost,
G. Debrégeas
Abstract:
In humans, the tactile perception of fine textures (spatial scale <200 micrometers) is mediated by skin vibrations generated as the finger scans the surface. To establish the relationship between texture characteristics and subcutaneous vibrations, a biomimetic tactile sensor has been designed whose dimensions match those of the fingertip. When the sensor surface is patterned with parallel ridge…
▽ More
In humans, the tactile perception of fine textures (spatial scale <200 micrometers) is mediated by skin vibrations generated as the finger scans the surface. To establish the relationship between texture characteristics and subcutaneous vibrations, a biomimetic tactile sensor has been designed whose dimensions match those of the fingertip. When the sensor surface is patterned with parallel ridges mimicking the fingerprints, the spectrum of vibrations elicited by randomly textured substrates is dominated by one frequency set by the ratio of the scanning speed to the interridge distance. For human touch, this frequency falls within the optimal range of sensitivity of Pacinian afferents, which mediate the coding of fine textures. Thus, fingerprints may perform spectral selection and amplification of tactile information that facilitate its processing by specific mechanoreceptors.
△ Less
Submitted 25 November, 2009;
originally announced November 2009.
-
Brittle/quasi-brittle transition in dynamic fracture: An energetic signature
Authors:
Julien Scheibert,
Claudia Guerra,
Fabrice Célarié,
Davy Dalmas,
Daniel Bonamy
Abstract:
Dynamic fracture experiments were performed in PMMA over a wide range of velocities and reveal that the fracture energy exhibits an abrupt 3-folds increase from its value at crack initiation at a well-defined critical velocity, below the one associated to the onset of micro-branching instability. This transition is associated with the appearance of conics patterns on fracture surfaces that, in m…
▽ More
Dynamic fracture experiments were performed in PMMA over a wide range of velocities and reveal that the fracture energy exhibits an abrupt 3-folds increase from its value at crack initiation at a well-defined critical velocity, below the one associated to the onset of micro-branching instability. This transition is associated with the appearance of conics patterns on fracture surfaces that, in many materials, are the signature of damage spreading through the nucleation and growth of microcracks. A simple model allows to relate both the energetic and fractographic measurements. These results suggest that dynamic fracture at low velocities in amorphous materials is controlled by the brittle/quasi-brittle transition studied here.
△ Less
Submitted 15 February, 2010; v1 submitted 16 June, 2009;
originally announced June 2009.
-
Stress Field at a Sliding Frictional Contact: Experiments and Calculations
Authors:
Julien Scheibert,
Alexis Prevost,
Georges Debrégeas,
Eytan Katzav,
Mohktar Adda-Bedia
Abstract:
A MEMS-based sensing device is used to measure the normal and tangential stress fields at the base of a rough elastomer film in contact with a smooth glass cylinder in steady sliding. This geometry allows for a direct comparison between the stress profiles measured along the sliding direction and the predictions of an original \textit{exact} bidimensional model of friction. The latter assumes Am…
▽ More
A MEMS-based sensing device is used to measure the normal and tangential stress fields at the base of a rough elastomer film in contact with a smooth glass cylinder in steady sliding. This geometry allows for a direct comparison between the stress profiles measured along the sliding direction and the predictions of an original \textit{exact} bidimensional model of friction. The latter assumes Amontons' friction law, which implies that in steady sliding the interfacial tangential stress is equal to the normal stress times a pressure-independent dynamic friction coefficient $μ_d$, but makes no further assumption on the normal stress field. Discrepancy between the measured and calculated profiles is less than 14% over the range of loads explored. Comparison with a test model, based on the classical assumption that the normal stress field is unchanged upon tangential loading, shows that the exact model better reproduces the experimental profiles at high loads. However, significant deviations remain that are not accounted for by either calculations. In that regard, the relevance of two other assumptions made in the calculations, namely (i) the smoothness of the interface and (ii) the pressure-independence of $μ_d$ is briefly discussed.
△ Less
Submitted 12 May, 2009; v1 submitted 20 October, 2008;
originally announced October 2008.
-
Probing the micromechanics of a multi-contact interface at the onset of frictional sliding
Authors:
Alexis Prevost,
Julien Scheibert,
Georges Debrégeas
Abstract:
Digital Image Correlation is used to study the micromechanics of a multi-contact interface formed between a rough elastomer and a smooth glass surface. The in-plane elastomer deformation is monitored during the incipient sliding regime, i.e. the transition between static and sliding contact. As the shear load is increased, an annular slip region, in coexistence with a central stick region, is foun…
▽ More
Digital Image Correlation is used to study the micromechanics of a multi-contact interface formed between a rough elastomer and a smooth glass surface. The in-plane elastomer deformation is monitored during the incipient sliding regime, i.e. the transition between static and sliding contact. As the shear load is increased, an annular slip region, in coexistence with a central stick region, is found to progressively invade the contact. From the interfacial displacement field, the tangential stress field can be further computed using a numerical inversion procedure. These local mechanical measurements are found to be correctly captured by Cattaneo and Mindlin (CM)'s model. However, close comparison reveals significant discrepancies in both the displacements and stress fields that reflect the oversimplifying hypothesis underlying CM's scenario. In particular, our optical measurements allow us to exhibit an elasto-plastic like friction constitutive equation that differs from the rigid-plastic behavior assumed in CM's model. This local constitutive law, which involves a roughness-related length scale, is consistent with the model of Bureau \textit{et al.} [Proc. R. Soc. London A \textbf{459}, 2787 (2003)] derived for homogeneously loaded macroscopic multi-contact interfaces, thus extending its validity to mesoscopic scales.measurements allow for the first quantitative test of Cattaneo and Mindlin (CM) classical model of the incipient sliding of a smooth interface. Small deviations are observed and interpreted as a result of the finite compliance of the rough interface, a behavior which contrasts with Amontons' law of friction assumed to be valid locally in CM's model. We illustrate how these measurements actually provide a method for probing the rheology of the rough interface, which we find to be of the elasto-plastic type.
△ Less
Submitted 4 September, 2012; v1 submitted 18 September, 2008;
originally announced September 2008.
-
Experimental evidence of non-Amontons behaviour at a multicontact interface
Authors:
Julien Scheibert,
Alexis Prevost,
Joel Frelat,
Patrice Rey,
Georges Debrégeas
Abstract:
We report on normal stress field measurements at the multicontact interface between a rough elastomeric film and a smooth glass sphere under normal load, using an original MEMS-based stress sensing device. These measurements are compared to Finite Elements Method calculations with boundary conditions obeying locally Amontons' rigid-plastic-like friction law with a uniform friction coefficient. I…
▽ More
We report on normal stress field measurements at the multicontact interface between a rough elastomeric film and a smooth glass sphere under normal load, using an original MEMS-based stress sensing device. These measurements are compared to Finite Elements Method calculations with boundary conditions obeying locally Amontons' rigid-plastic-like friction law with a uniform friction coefficient. In dry contact conditions, significant deviations are observed which decrease with increasing load. In lubricated conditions, the measured profile recovers almost perfectly the predicted profile. These results are interpreted as a consequence of the finite compliance of the multicontact interface, a mechanism which is not taken into account in Amontons' law.
△ Less
Submitted 10 June, 2008;
originally announced June 2008.
-
Local contact stress measurements at a rough interface
Authors:
J. Scheibert,
A. Prevost,
J. Frelat,
P. Rey,
G. Debrégeas
Abstract:
An original MEMS-based force sensing device is designed which allows to measure spatially resolved normal and tangential stress fields at the base of an elastomeric film. This device is used for the study of the contact stress between a rough film and a smooth glass sphere under normal load. The measured profiles are compared to Finite Elements Method calculations for a smooth contact with bound…
▽ More
An original MEMS-based force sensing device is designed which allows to measure spatially resolved normal and tangential stress fields at the base of an elastomeric film. This device is used for the study of the contact stress between a rough film and a smooth glass sphere under normal load. The measured profiles are compared to Finite Elements Method calculations for a smooth contact with boundary conditions obeying Amontons-Coulomb's friction law. The accuracy of the measurements allows to discriminate between dry and lubricated contact conditions and to evidence load-dependent deviations from Amontons-Coulomb's profiles. These deviations are qualitatively interpreted by taking into account the finite compliance of the micro-contact population.
△ Less
Submitted 7 November, 2007;
originally announced November 2007.