-
Significantly increased magnetic anisotropy in Co nano-columnar multilayer structure via a unique sequential oblique-normal deposition approach
Authors:
Arun Singh Dev,
Sharanjeet Singh,
Anup Kumar Bera,
Pooja Gupta,
Velaga Srihari,
Pallavi Pandit,
Matthias Schwartzkopf,
Stephan V. Roth,
Dileep Kumar
Abstract:
Oblique/normal sequential deposition technique is used to create Co based unique multilayer structure [Co-oblique(4.4nm)/Co-normal (4.2 nm)]x10, where each Co-oblique layer is deposited at an oblique angle of 75deg, to induce large in-plane uniaxial magnetic anisotropy (UMA). Compared to the previous ripple, stress and oblique angle deposition (OAD) related studies on Cobalt in literature, one-ord…
▽ More
Oblique/normal sequential deposition technique is used to create Co based unique multilayer structure [Co-oblique(4.4nm)/Co-normal (4.2 nm)]x10, where each Co-oblique layer is deposited at an oblique angle of 75deg, to induce large in-plane uniaxial magnetic anisotropy (UMA). Compared to the previous ripple, stress and oblique angle deposition (OAD) related studies on Cobalt in literature, one-order higher UMA with the easy axis of magnetization along the projection of the tilted nano-columns in the multilayer plane is observed. The multilayer retains magnetic anisotropy even after annealing at 450C. The in-plane UMA in this multilayer is found to be the combination of shape, and magneto-crystalline anisotropy (MCA) confirmed by the temperature-dependent grazing incidence small angle X-ray scattering (GISAXS), in situ reflection high energy electron diffraction (RHEED) and grazing incidence X-ray diffraction (GIXRD) measurements. The crystalline texturing of hcp Co in the multilayer minimizes spin-orbit coupling energy along the column direction, which couples with the shape anisotropy energies and results in preferential orientation of the easy magnetic axis along the projection of the columns in the multilayer plane. Reduction in UMA after annealing is attributed to diffusion/merging of columns and annihilating crystallographic texturing. The obtained one-order high UMA demonstrates the potential application of the unique structure engineering technique, which may have far-reaching advantages in magnetic thin films/multilayers and spintronic devices.
△ Less
Submitted 17 February, 2023;
originally announced February 2023.
-
Direct Linearly-Polarised Electroluminescence from Perovskite Nanoplatelet Superlattices
Authors:
Junzhi Ye,
Aobo Ren,
Linjie Dai,
Tomi Baikie,
Renjun Guo,
Debapriya Pal,
Sebastian Gorgon,
Julian E. Heger,
Junyang Huang,
Yuqi Sun,
Rakesh Arul,
Gianluca Grimaldi,
Kaiwen Zhang,
Javad Shamsi,
Yi-Teng Huang,
Hao Wang,
Jiang Wu,
A. Femius Koenderink,
Laura Torrente Murciano,
Matthias Schwartzkopf,
Stephen V. Roth,
Peter Muller-Buschbaum,
Jeremy J. Baumberg,
Samuel D. Stranks,
Neil C. Greenham
, et al. (4 additional authors not shown)
Abstract:
Polarised light is critical for a wide range of applications, but is usually generated by filtering unpolarised light, which leads to significant energy losses and requires additional optics. Herein, the direct emission of linearly-polarised light is achieved from light-emitting diodes (LEDs) made of CsPbI3 perovskite nanoplatelet superlattices. Through use of solvents with different vapour pressu…
▽ More
Polarised light is critical for a wide range of applications, but is usually generated by filtering unpolarised light, which leads to significant energy losses and requires additional optics. Herein, the direct emission of linearly-polarised light is achieved from light-emitting diodes (LEDs) made of CsPbI3 perovskite nanoplatelet superlattices. Through use of solvents with different vapour pressures, the self-assembly of perovskite nanoplatelets is achieved to enable fine control over the orientation (either face-up or edge-up) and therefore the transition dipole moment. As a result of the highly-uniform alignment of the nanoplatelets, as well as their strong quantum and dielectric confinement, large exciton fine-structure splitting is achieved at the film level, leading to pure-red LEDs exhibiting a high degree of linear polarisation of 74.4% without any photonic structures. This work unveils the possibilities of perovskite nanoplatelets as a highly promising source of linearly-polarised electroluminescence, opening up the development of next-generation 3D displays and optical communications from this highly versatile, solution-processable system.
△ Less
Submitted 8 February, 2023; v1 submitted 7 February, 2023;
originally announced February 2023.
-
Evolution of interface magnetism in Fe/Alq3 bilayer
Authors:
Avinash Ganesh Khanderao,
Sonia Kaushik,
Arun Singh Dev,
V. R. Reddy,
Ilya Sergueev,
Hans-Christian Wille,
Pallavi Pandit,
Stephan V Roth,
Dileep Kumar
Abstract:
Interface magnetism and topological structure of Fe on organic semiconductor film (Alq3) have been studied and compared with Fe film deposited directly on Si (100) substrate. To get information on the diffused Fe layer at the Fe/Alq3 interface, grazing incident nuclear resonance scattering (GINRS) measurements are made depth selective by introducing a 95% enriched thin 57Fe layer at the Interface…
▽ More
Interface magnetism and topological structure of Fe on organic semiconductor film (Alq3) have been studied and compared with Fe film deposited directly on Si (100) substrate. To get information on the diffused Fe layer at the Fe/Alq3 interface, grazing incident nuclear resonance scattering (GINRS) measurements are made depth selective by introducing a 95% enriched thin 57Fe layer at the Interface and producing x-ray standing wave within the layered structure. Compared with Fe growth on Si substrate, where film exhibits a hyperfine field value of 32 T (Bulk Fe), a thick Fe- Alq3 interface has been found with reduced electron density and hyperfine fields providing evidence of deep penetration of Fe atoms into Alq3 film. Due to the soft nature of Alq3, Fe moments relax in the film plane. At the same time, Fe on Si has a resultant ~43 deg out-of-plane orientation of Fe moments at the Interface due to the stressed and rough Fe layer near Si. The evolution of magnetism at the Fe-Alq3 Interface is monitored using in-situ magneto-optical Kerr effect (MOKE) during the growth of Fe on the Alq3 surface and small-angle x-ray scattering (SAXS) measurements. It is found that the Fe atom tries to organize into clusters to minimize their surface/interface energy. The origin of the 2.4 nm thick magnetic dead layer at the Interface is attributed to the small Fe clusters of paramagnetic or superparamagnetic nature. The present work provides an understanding of interfacial magnetism at metal-organic interfaces and the topological study using the GI-NRS technique, which is made depth selective to probe magnetism of the diffused ferromagnetic layer, which is otherwise difficult for lab-based techniques.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
Light-induced renormalization of the Dirac quasiparticles in the nodal-line semimetal ZrSiSe
Authors:
G. Gatti,
A. Crepaldi,
M. Puppin,
N. Tancogne-Dejean,
L. Xian,
S. Roth,
S. Polishchuk,
Ph. Bugnon,
A. Magrez,
H. Berger,
F. Frassetto,
L. Poletto,
L. Moreschini,
S. Moser,
A. Bostwick,
E. Rotenberg,
A. Rubio,
M. Chergui,
M. Grioni
Abstract:
In nodal-line semimetals linearly dispersing states form Dirac loops in the reciprocal space, with high degree of electron-hole symmetry and almost-vanishing density of states near the Fermi level. The result is reduced electronic screening and enhanced correlations between Dirac quasiparticles. Here we investigate the electronic structure of ZrSiSe, by combining time- and angle-resolved photoelec…
▽ More
In nodal-line semimetals linearly dispersing states form Dirac loops in the reciprocal space, with high degree of electron-hole symmetry and almost-vanishing density of states near the Fermi level. The result is reduced electronic screening and enhanced correlations between Dirac quasiparticles. Here we investigate the electronic structure of ZrSiSe, by combining time- and angle-resolved photoelectron spectroscopy with ab initio density functional theory (DFT) complemented by an extended Hubbard model (DFT +U +V). We show that electronic correlations are reduced on an ultrashort timescale by optical excitation of high-energy electrons-hole pairs, which transiently screen the Coulomb interaction. Our findings demonstrate an all-optical method for engineering the band structure of a quantum material.
△ Less
Submitted 20 December, 2019;
originally announced December 2019.
-
Evidence of large polarons in photoemission band map** of the perovskite semiconductor CsPbBr$_3$
Authors:
M. Puppin,
S. Polishchuk,
N. Colonna,
A. Crepaldi,
D. N. Dirin,
O. Nazarenko,
R. De Gennaro,
G. Gatti,
S. Roth,
T. Barillot,
L. Poletto,
R. P. Xian,
L. Rettig,
M. Wolf,
R. Ernstorfer,
M. V. Kovalenko,
N. Marzari,
M. Grioni,
M. Chergui
Abstract:
Lead-halide perovskite (LHP) semiconductors are emergent optoelectronic materials with outstanding transport properties which are not yet fully understood. We find signatures of large polaron formation in the electronic structure of the inorganic LHP CsPbBr$_3$ by means of angle-resolved photoelectron spectroscopy. The experimental valence band dispersion shows a hole effective mass…
▽ More
Lead-halide perovskite (LHP) semiconductors are emergent optoelectronic materials with outstanding transport properties which are not yet fully understood. We find signatures of large polaron formation in the electronic structure of the inorganic LHP CsPbBr$_3$ by means of angle-resolved photoelectron spectroscopy. The experimental valence band dispersion shows a hole effective mass $0.26\pm0.02\,\,m_e$, 50% heavier than the bare mass $m_0 =0.17 m_e$ predicted by density functional theory. Calculations of electron-phonon coupling indicate that phonon dressing of the carriers mainly occurs via distortions of the Pb-Br bond with a Fröhlich coupling parameter $α=1.82$. A good agreement with our experimental data is obtained within the Feynmann polaron model, validating a viable theorical method to predict the carrier effective mass of LHPs ab-initio.
△ Less
Submitted 31 August, 2019;
originally announced September 2019.
-
An electron acceptor molecule in a nanomesh: F4TCNQ on h-BN/Rh(111)
Authors:
Huanyao Cun,
Ari Paavo Seitsonen,
Silvan Roth,
Silvio Decurtins,
Shi-Xia Liu,
Jürg Osterwalder,
Thomas Greber
Abstract:
The adsorption of molecules on surfaces affects the surface dipole and thus changes in the work function may be expected. The effect in change of work function is particularly strong if charge between substrate and adsorbate is involved. Here we report the deposition of a strong electron acceptor molecule, tetrafluorotetracyanoquinodimethane C$_{12}$F$_4$N$_4$ (F$_{4}$TCNQ) on a monolayer of hexag…
▽ More
The adsorption of molecules on surfaces affects the surface dipole and thus changes in the work function may be expected. The effect in change of work function is particularly strong if charge between substrate and adsorbate is involved. Here we report the deposition of a strong electron acceptor molecule, tetrafluorotetracyanoquinodimethane C$_{12}$F$_4$N$_4$ (F$_{4}$TCNQ) on a monolayer of hexagonal boron nitride nanomesh ($h$-BN on Rh(111)). The work function of the F$_{4}$TCNQ/$h$-BN/Rh system increases upon increasing molecular coverage. The magnitude of the effect indicates electron transfer from the substrate to the F$_{4}$TCNQ molecules. Density functional theory calculations confirm the work function shift and predict doubly charged F$_{4}$TCNQ$^{2-}$ in the nanomesh pores, where the $h$-BN is closest to the Rh substrate, and to have the largest binding energy there. The preferred adsorption in the pores is conjectured from a series of ultraviolet photoelectron spectroscopy data, where the $σ$ bands in the pores are first attenuated. Scanning tunneling microscopy measurements indicate that F$_{4}$TCNQ molecules on the nanomesh are mobile at room temperature, as "hop**" between neighboring pores is observed.
△ Less
Submitted 24 May, 2018;
originally announced May 2018.
-
Dynamic characterization of cellulose nanofibrils in sheared and extended semi-dilute dispersions
Authors:
Tomas Rosén,
Nitesh Mittal,
Stephan V. Roth,
Peng Zhang,
L. Daniel Söderberg,
Fredrik Lundell
Abstract:
New materials made through controlled assembly of dispersed cellulose nanofibrils (CNF) has the potential to develop into biobased competitors to some of the highest performing materials today. The performance of these new cellulose materials depends on how easily CNF alignment can be controlled with hydrodynamic forces, which are always in competition with a different process driving the system t…
▽ More
New materials made through controlled assembly of dispersed cellulose nanofibrils (CNF) has the potential to develop into biobased competitors to some of the highest performing materials today. The performance of these new cellulose materials depends on how easily CNF alignment can be controlled with hydrodynamic forces, which are always in competition with a different process driving the system towards isotropy, called rotary diffusion. In this work, we present a flow-stop experiment using polarized optical microscopy (POM) to study the rotary diffusion of CNF dispersions in process relevant flows and concentrations. This is combined with small angle X-ray scattering (SAXS) experiments to analyze the true orientation distribution function (ODF) of the flowing fibrils. It is found that the rotary diffusion process of CNF occurs at multiple time scales, where the fastest scale seems to be dependent on the deformation history of the dispersion before the stop. At the same time, the hypothesis that rotary diffusion is dependent on the initial ODF does not hold as the same distribution can result in different diffusion time scales. The rotary diffusion is found to be faster in flows dominated by shear compared to pure extensional flows. Furthermore, the experimental setup can be used to quickly characterize the dynamic properties of flowing CNF and thus aid in determining the quality of the dispersion and its usability in material processes.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Evaluating alignment of elongated nanoparticles in cylindrical geometries through small angle X-ray scattering experiments
Authors:
Tomas Rosén,
Christophe Brouzet,
Stephan V. Roth,
Fredrik Lundell,
L. Daniel Söderberg
Abstract:
The increased availability and brilliance of new X-ray facilities have in the recent years opened up the possibility to characterize the motion of dispersed nanoparticles in various microfluidic applications. One of these applications is the process of making strong continuous filaments through hydrodynamic alignment and assembly of cellulose nanofibrils (CNF) demonstrated by Håkansson et al. [Nat…
▽ More
The increased availability and brilliance of new X-ray facilities have in the recent years opened up the possibility to characterize the motion of dispersed nanoparticles in various microfluidic applications. One of these applications is the process of making strong continuous filaments through hydrodynamic alignment and assembly of cellulose nanofibrils (CNF) demonstrated by Håkansson et al. [Nature communications 5, 2014]. In this process it is vital to study the alignment of the nanofibrils in the flow, as this in turn affects the final material properties of the dried filament. Small angle X-ray scattering (SAXS) is a well-suited characterization technique for this, which typically provides the alignment in a projected plane perpendicular to the beam direction. In this work, we demonstrate a simple method to reconstruct the full three-dimensional (3D) orientation distribution function (ODF) from a SAXS-experiment through the assumption that the azimuthal angle of the nanofibril around the flow direction is distributed uniformly; an assumption that is approximately valid in the flow-focusing process. For demonstrational purposes, the experimental results from Håkansson et al. (2014) have been revised, resulting in a small correction to the presented order parameters. The results are then directly compared with simple numerical models to describe the increased alignment of CNF both in the flowing system and during the drying process. The proposed reconstruction method will allow for further improvements of theoretical or numerical simulations and consequently open up new possibilities for optimizing assembly processes, which include flow-alignment of elongated nanoparticles.
△ Less
Submitted 3 November, 2017;
originally announced November 2017.
-
Enhanced ultrafast relaxation rate in the Weyl semimetal phase of $\mathbf{MoTe_2}$ measured by time-and angle-resolved photoelectron spectroscopy
Authors:
A. Crepaldi,
G. Autès,
G. Gatti,
S. Roth,
A. Sterzi,
G. Manzoni,
M. Zacchigna,
C. Cacho,
R. T. Chapman,
E. Springate,
E. A. Seddon,
Ph. Bugnon,
A. Magrez,
H. Berger,
I. Vobornik,
M. Kalläne,
A. Quer,
K. Rossnagel,
F. Parmigiani,
O. V. Yazyev,
M. Grioni
Abstract:
$\mathrm{MoTe_2}$ has recently been shown to realize in its low-temperature phase the type-II Weyl semimetal (WSM). We investigated by time- and angle- resolved photoelectron spectroscopy (tr-ARPES) the possible influence of the Weyl points in the electron dynamics above the Fermi level $\mathrm{E_F}$, by comparing the ultrafast response of $\mathrm{MoTe_2}…
▽ More
$\mathrm{MoTe_2}$ has recently been shown to realize in its low-temperature phase the type-II Weyl semimetal (WSM). We investigated by time- and angle- resolved photoelectron spectroscopy (tr-ARPES) the possible influence of the Weyl points in the electron dynamics above the Fermi level $\mathrm{E_F}$, by comparing the ultrafast response of $\mathrm{MoTe_2}$ in the trivial and topological phases. In the low-temperature WSM phase, we report an enhanced relaxation rate of electrons optically excited to the conduction band, which we interpret as a fingerprint of the local gap closure when Weyl points form. By contrast, we find that the electron dynamics of the related compound $\mathrm{WTe_2}$ is slower and temperature-independent, consistent with a topologically trivial nature of this material. Our results shows that tr-ARPES is sensitive to the small modifications of the unoccupied band structure accompanying the structural and topological phase transition of $\mathrm{MoTe_2}$.
△ Less
Submitted 28 September, 2017;
originally announced September 2017.
-
Excitation of coherent phonons in the one-dimensional Bi(114) surface
Authors:
D. Leuenberger,
H. Yanagisawa,
S. Roth,
J. H. Dil,
J. W. Wells,
P. Hofmann,
J. Osterwalder,
M. Hengsberger
Abstract:
We present time-resolved photoemission experiments from a peculiar bismuth surface, Bi(114). The strong one-dimensional character of this surface is reflected in the Fermi surface, which consists of spin-polarized straight lines. Our results show that the depletion of the surface state and the population of the bulk conduction band after the initial optical excitation persist for very long times.…
▽ More
We present time-resolved photoemission experiments from a peculiar bismuth surface, Bi(114). The strong one-dimensional character of this surface is reflected in the Fermi surface, which consists of spin-polarized straight lines. Our results show that the depletion of the surface state and the population of the bulk conduction band after the initial optical excitation persist for very long times. The disequilibrium within the hot electron gas along with strong electron-phonon coupling cause a displacive excitation of coherent phonons, which in turn are reflected in coherent modulations of the electronic states. Beside the well-known A1g bulk phonon mode at 2.76 THz the time-resolved photoelectron spectra reveal a second mode at 0.72 THz which can be attributed to an optical surface phonon mode along the atomic rows of the Bi(114) surface.
△ Less
Submitted 11 March, 2013;
originally announced March 2013.
-
Adsorption of silicon on Au(110): an ordered two dimensional surface alloy
Authors:
Hanna Enrique,
Andrew Mayne,
Abdelkader Kara,
Sébastien Vizzini,
Silvan Roth,
Boubekeur Lalmi,
Ari P Seitsonen,
Bernard Aufray,
Thomas Greber,
Rachid Belkhou,
Gérald Dujardin,
Hamid Oughaddou
Abstract:
We report on experimental evidence for the formation of a two dimensional Si/Au(110) surface alloy. In this study, we have used a combination of scanning tunneling microscopy, low energy electron diffraction, Auger electron spectroscopy and ab initio calculations based on density functional theory. A highly ordered and stable Si-Au surface alloy is observed subsequent to growth of a sub-monolayer…
▽ More
We report on experimental evidence for the formation of a two dimensional Si/Au(110) surface alloy. In this study, we have used a combination of scanning tunneling microscopy, low energy electron diffraction, Auger electron spectroscopy and ab initio calculations based on density functional theory. A highly ordered and stable Si-Au surface alloy is observed subsequent to growth of a sub-monolayer of silicon on an Au(110) substrate kept above the eutectic temperature.
△ Less
Submitted 15 February, 2013;
originally announced February 2013.
-
Formation of one-dimensional self-assembled silicon nanoribbons on Au(110)-(2x1)
Authors:
Mohamed Rachid Tchalal,
Hanna Enriquez,
Andrew J. Mayne,
Abdelkader Kara,
Silvan Roth,
Mathieu G. Silly,
Azzedine Bendounan,
Fausto Sirotti,
Thomas Greber,
Bernard Aufray,
Gérald Dujardin,
Mustapha Ait Ali,
Hamid Oughaddou
Abstract:
We report results on the self-assembly of silicon nanoribbons on the (2x1) reconstructed Au(110) surface under ultra-high vacuum conditions. Upon adsorption of 0.2 monolayer (ML) of silicon the (2x1) reconstruction of Au(110) is replaced by an ordered surface alloy. Above this coverage a new superstructure is revealed by low electron energy diffraction (LEED) which becomes sharper at 0.3 Si ML. Th…
▽ More
We report results on the self-assembly of silicon nanoribbons on the (2x1) reconstructed Au(110) surface under ultra-high vacuum conditions. Upon adsorption of 0.2 monolayer (ML) of silicon the (2x1) reconstruction of Au(110) is replaced by an ordered surface alloy. Above this coverage a new superstructure is revealed by low electron energy diffraction (LEED) which becomes sharper at 0.3 Si ML. This superstructure corresponds to Si nanoribbons all oriented along the [-110] direction as revealed by LEED and scanning tunneling microscopy (STM). STM and high-resolution photoemission spectroscopy indicate that the nanoribbons are flat and predominantly 1.6 nm wide. In addition the silicon atoms show signatures of two chemical environments corresponding to the edge and center of the ribbons.
△ Less
Submitted 14 February, 2013;
originally announced February 2013.
-
An accurate measurement of electron beam induced displacement cross sections for single-layer graphene
Authors:
J. C. Meyer,
F. Eder,
S. Kurasch,
V. Skakalova,
J. Kotakoski,
H. -J. Park,
S. Roth,
A. Chuvilin,
S. Eyhusen,
G. Benner,
A. V. Krasheninnikov,
U. Kaiser
Abstract:
We present an accurate measurement and a quantitative analysis of electron-beam induced displacements of carbon atoms in single-layer graphene. We directly measure the atomic displacement ("knock-on") cross section by counting the lost atoms as a function of the electron beam energy and applied dose. Further, we separate knock-on damage (originating from the collision of the beam electrons with th…
▽ More
We present an accurate measurement and a quantitative analysis of electron-beam induced displacements of carbon atoms in single-layer graphene. We directly measure the atomic displacement ("knock-on") cross section by counting the lost atoms as a function of the electron beam energy and applied dose. Further, we separate knock-on damage (originating from the collision of the beam electrons with the nucleus of the target atom) from other radiation damage mechanisms (e.g. ionization damage or chemical etching) by the comparison of ordinary (12C) and heavy (13C) graphene. Our analysis shows that a static lattice approximation is not sufficient to describe knock-on damage in this material, while a very good agreement between calculated and experimental cross sections is obtained if lattice vibrations are taken into account.
△ Less
Submitted 8 May, 2012; v1 submitted 11 March, 2012;
originally announced March 2012.
-
Corrugated single layer templates for molecules: From h-BN Nanomesh to Graphene based Quantum dot arrays
Authors:
Haifeng Ma,
Mario Thomann,
Jeanette Schmidlin,
Silvan Roth,
Martin Morscher,
Thomas Greber
Abstract:
Functional nano-templates enable self-assembly of otherwise impossible arrangements of molecules. A particular class of such templates is that of sp2 hybridized single layers of hexagonal boron nitride or carbon (graphene) on metal supports. If the substrate and the single layer have a lattice mismatch, superstructures are formed. On substrates like rhodium or ruthenium these superstructures have…
▽ More
Functional nano-templates enable self-assembly of otherwise impossible arrangements of molecules. A particular class of such templates is that of sp2 hybridized single layers of hexagonal boron nitride or carbon (graphene) on metal supports. If the substrate and the single layer have a lattice mismatch, superstructures are formed. On substrates like rhodium or ruthenium these superstructures have unit cells with ~3 nm lattice constant. They are corrugated and contain sub-units, which behave like traps for molecules or quantum dots, which are small enough to become operational at room temperature. For graphene on Rh(111) we emphasize a new structural element of small extra hills within the corrugation landscape. For the case of molecules like water it is shown that new phases assemble on such templates, and that they can be used as "nano-laboratories" where many individual processes are studied in parallel. Furthermore, it is shown that the h-BN/Rh(111) nanomesh displays a strong scanning tunneling microscopy induced luminescence contrast within the 3 nm unit cell which is a way to address trapped molecules and/or quantum dots.
△ Less
Submitted 27 September, 2010; v1 submitted 29 June, 2010;
originally announced June 2010.
-
Charged defects in graphene and the ionicity of hexagonal boron nitride in direct images
Authors:
Jannik C. Meyer,
Simon Kurasch,
Hye ** Park,
Viera Skakalova,
Daniela Künzel,
Axel Groß,
Andrey Chuvilin,
Gerardo Algara-Siller,
Siegmar Roth,
Takayuki Iwasaki,
Ulrich Starke,
Jürgen Smet,
Ute Kaiser
Abstract:
We report on the detection and charge distribution analysis for nitrogen substitutional dopants in single layer graphene membranes by aberration-corrected high-resolution transmission electron microscopy (HRTEM). Further, we show that the ionicity of single-layer hexagonal boron nitride can be confirmed from direct images. For the first time, we demonstrate by a combination of HRTEM experiments an…
▽ More
We report on the detection and charge distribution analysis for nitrogen substitutional dopants in single layer graphene membranes by aberration-corrected high-resolution transmission electron microscopy (HRTEM). Further, we show that the ionicity of single-layer hexagonal boron nitride can be confirmed from direct images. For the first time, we demonstrate by a combination of HRTEM experiments and first-principles electronic structure calculations that adjustments to the atomic potentials due to chemical bonding can be discerned in HRTEM images. Our experiments open a way to discern electronic configurations in point defects or other non-periodic arrangements or nanoscale objects that can not be analyzed in an electron or x-ray diffraction experiment.
△ Less
Submitted 4 June, 2010; v1 submitted 3 June, 2010;
originally announced June 2010.
-
Complete description of re-entrant phase behaviour in a charge variable colloidal model system
Authors:
Patrick Wette,
Ina Klassen,
Dirk Holland-Moritz,
Dieter M. Herlach,
Hans Joachim Schoepe,
Nina Lorenz,
Holger Reiber,
Thomas Palberg,
Stephan V. Roth
Abstract:
In titration experiments with NaOH we have determined the full phase diagram of charged colloidal spheres in dependence on the particle density n, the particle effective charge Zeff and the concentration of screening electrolyte c using microscopy, light and Ultra Small Angle X-Ray Scattering (USAXS). For sufficiently large n the system crystallizes upon increasing Zeff at constant c and melts u…
▽ More
In titration experiments with NaOH we have determined the full phase diagram of charged colloidal spheres in dependence on the particle density n, the particle effective charge Zeff and the concentration of screening electrolyte c using microscopy, light and Ultra Small Angle X-Ray Scattering (USAXS). For sufficiently large n the system crystallizes upon increasing Zeff at constant c and melts upon increasing c at only slightly altered Zeff. In contrast to earlier work equilibrium phase boundaries are consistent with a universal melting line prediction from computer simulation, if the elasticity effective charge is used. This charge accounts for both counter-ion condensation and many body effects.
△ Less
Submitted 2 December, 2009;
originally announced December 2009.
-
Growth and properties of few-layer graphene prepared by chemical vapor deposition
Authors:
Hye ** Park,
Jannik Meyer,
Siegmar Roth,
Viera Skakalova
Abstract:
The structure, and electrical, mechanical and optical properties of few-layer graphene (FLG) synthesized by chemical vapor deposition (CVD) on a Ni coated substrate were studied. Atomic resolution transmission electron microscope (TEM) images show highly crystalline single layer parts of the sample changing to multilayer domains where crystal boundaries are connected by chemical bonds. This sugg…
▽ More
The structure, and electrical, mechanical and optical properties of few-layer graphene (FLG) synthesized by chemical vapor deposition (CVD) on a Ni coated substrate were studied. Atomic resolution transmission electron microscope (TEM) images show highly crystalline single layer parts of the sample changing to multilayer domains where crystal boundaries are connected by chemical bonds. This suggests two different growth mechanisms. CVD and carbon segregation participate in the growth process and are responsible for the different structural formations found. Measurements of the electrical and mechanical properties on the centimeter scale provide evidence of a large scale structural continuity: 1) in the temperature dependence of the electrical conductivity, a non-zero value near 0 K indicates the metallic character of electronic transport; 2) the Young's modulus of a pristine polycarbonate film (1.37 GPa) improves significantly when covered with FLG (1.85 GPa). The latter indicates an extraordinary Young modulus value of the FLG-coating of TPa orders of magnitude. Raman and optical spectroscopy support the previous conclusions. The sample can be used as a flexible and transparent electrode and is suitable for special membranes to detect and study individual molecules in high resolution TEM.
△ Less
Submitted 30 October, 2009;
originally announced October 2009.
-
Correlation between resistance fluctuations and temperature dependence of conductivity in graphene
Authors:
Viera Skakalova,
Alan B. Kaiser,
Jai Seung Yoo,
Dirk Obergfell,
Siegmar Roth
Abstract:
The weak temperature dependence of the resistance R(T) of monolayer graphene1-3 indicates an extraordinarily high intrinsic mobility of the charge carriers. Important complications are the presence of mobile scattering centres that strongly modify charge transport, and the presence of strong mesoscopic conductance fluctuations that, in graphene, persist to relatively high temperatures4,5. In thi…
▽ More
The weak temperature dependence of the resistance R(T) of monolayer graphene1-3 indicates an extraordinarily high intrinsic mobility of the charge carriers. Important complications are the presence of mobile scattering centres that strongly modify charge transport, and the presence of strong mesoscopic conductance fluctuations that, in graphene, persist to relatively high temperatures4,5. In this Letter, we investigate the surprisingly varied changes in resistance that we find in graphene flakes as temperature is lowered below 70 K. We propose that these changes in R(T) arise from the temperature dependence of the scattered electron wave interference that causes the resistance fluctuations. Using the field effect transistor configuration, we verify this explanation in detail from measurements of R(T) by tuning to different gate voltages corresponding to particular features of the resistance fluctuations. We propose simple expressions that model R(T) at both low and high charge carrier densities.
△ Less
Submitted 7 March, 2009;
originally announced March 2009.
-
Preparation and electrical properties of cobalt-platinum nanoparticle monolayers deposited by the Langmuir-Blodgett technique
Authors:
Vesna Aleksandrovic,
Denis Greshnykh,
Igor Randjelovic,
Andreas Frömsdorf,
Andreas Kornowski,
Stephan Volkher Roth,
Christian Klinke,
Horst Weller
Abstract:
The Langmuir-Blodgett technique was utilized and optimized to produce closed monolayers of cobalt-platinum nanoparticles over vast areas. It is shown that sample preparation, "dip** angle", and subphase type have a strong impact on the quality of the produced films. The amount of ligands on the nanoparticles surface must be minimized, the dip** angle must be around 105$^{\circ}$, while the g…
▽ More
The Langmuir-Blodgett technique was utilized and optimized to produce closed monolayers of cobalt-platinum nanoparticles over vast areas. It is shown that sample preparation, "dip** angle", and subphase type have a strong impact on the quality of the produced films. The amount of ligands on the nanoparticles surface must be minimized, the dip** angle must be around 105$^{\circ}$, while the glycol subphase is necessary to obtain nanoparticle monolayers. The achieved films were characterized by scanning electron microscopy (SEM) and grazing incidence x-ray scattering (GISAXS). The electrical properties of the deposited films were studied by direct current (DC) measurements showing a discrepancy to the variable range hop** transport from the granular metal model, and favoring the simple thermal activated charge transport. SEM, GISAXS as well as DC measurements confirm a narrow size distribution and high ordering of the deposited films.
△ Less
Submitted 8 January, 2009;
originally announced January 2009.
-
Donor binding energy and thermally activated persistent photoconductivity in high mobility (001) AlAs quantum wells
Authors:
S. Dasgupta,
C. Knaak,
J. Moser,
M. Bichler,
S. F. Roth,
A. Fontcuberta i Morral,
G. Abstreiter,
M. Grayson
Abstract:
A do** series of AlAs (001) quantum wells with Si delta-modulation do** on both sides reveals different dark and post-illumination saturation densities, as well as temperature dependent photoconductivity. The lower dark two-dimensional electron density saturation is explained assuming deep binding energy of Delta_DK = 65.2 meV for Si-donors in the dark. Persistent photoconductivity (PPC) is…
▽ More
A do** series of AlAs (001) quantum wells with Si delta-modulation do** on both sides reveals different dark and post-illumination saturation densities, as well as temperature dependent photoconductivity. The lower dark two-dimensional electron density saturation is explained assuming deep binding energy of Delta_DK = 65.2 meV for Si-donors in the dark. Persistent photoconductivity (PPC) is observed upon illumination, with higher saturation density indicating shallow post-illumination donor binding energy. The photoconductivity is thermally activated, with 4 K illumination requiring post-illumination annealing to T = 30 K to saturate the PPC. Dark and post-illumination do** efficiencies are reported.
△ Less
Submitted 18 September, 2007; v1 submitted 12 July, 2007;
originally announced July 2007.
-
On the roughness of single- and bi-layer graphene membranes
Authors:
J. C. Meyer,
A. K. Geim,
M. I. Katsnelson,
K. S. Novoselov,
D. Obergfell,
S. Roth,
C. Girit,
A. Zettl
Abstract:
We present a detailed transmission electron microscopy and electron diffraction study of the thinnest possible membrane, a single layer of carbon atoms suspended in vacuum and attached only at its edges. Membranes consisting of two graphene layers are also reported. We find that the membranes exhibit an apparently random spontaneous curvature that is strongest in single-layer membranes. A direct…
▽ More
We present a detailed transmission electron microscopy and electron diffraction study of the thinnest possible membrane, a single layer of carbon atoms suspended in vacuum and attached only at its edges. Membranes consisting of two graphene layers are also reported. We find that the membranes exhibit an apparently random spontaneous curvature that is strongest in single-layer membranes. A direct visualization of the roughness is presented for two-layer membranes where we used the variation of diffracted intensities with the local orientation of the membrane.
△ Less
Submitted 1 March, 2007;
originally announced March 2007.
-
The structure of suspended graphene sheets
Authors:
Jannik C. Meyer,
A. K. Geim,
M. I. Katsnelson,
K. S. Novoselov,
T. J. Booth,
S. Roth
Abstract:
The recent discovery of graphene has sparked significant interest, which has so far been focused on the peculiar electronic structure of this material, in which charge carriers mimic massless relativistic particle. However, the structure of graphene - a single layer of carbon atoms densely packed in a honeycomb crystal lattice - is also puzzling. On the one hand, graphene appears to be a strictl…
▽ More
The recent discovery of graphene has sparked significant interest, which has so far been focused on the peculiar electronic structure of this material, in which charge carriers mimic massless relativistic particle. However, the structure of graphene - a single layer of carbon atoms densely packed in a honeycomb crystal lattice - is also puzzling. On the one hand, graphene appears to be a strictly two-dimensional (2D) material and exhibits such a high crystal quality that electrons can travel submicron distances without scattering. On the other hand, perfect 2D crystals cannot exist in the free state, according to both theory and experiment. This is often reconciled by the fact that all graphene structures studied so far were an integral part of larger 3D structures, either supported by a bulk substrate or embedded in a 3D matrix. Here we report individual graphene sheets freely suspended on a microfabricated scaffold in vacuum or air. These membranes are only one atom thick and still display a long-range crystalline order. However, our studies by transmission electron microscopy (TEM) have revealed that suspended graphene sheets are not perfectly flat but exhibit intrinsic microscopic roughening such that the surface normal varies by several degrees and out-of-plane deformations reach 1 nm. The atomically-thin single-crystal membranes offer an ample scope for fundamental research and new technologies whereas the observed corrugations in the third dimension may shed light on subtle reasons behind the stability of 2D crystals.
△ Less
Submitted 16 January, 2007;
originally announced January 2007.
-
The Raman Fingerprint of Graphene
Authors:
A. C. Ferrari,
J. C. Meyer,
V. Scardaci,
C. Casiraghi,
Michele Lazzeri,
Francesco Mauri,
S. Piscanec,
Da Jiang,
K. S. Novoselov,
S. Roth,
A. K. Geim
Abstract:
Graphene is the two-dimensional (2d) building block for carbon allotropes of every other dimensionality. It can be stacked into 3d graphite, rolled into 1d nanotubes, or wrapped into 0d fullerenes. Its recent discovery in free state has finally provided the possibility to study experimentally its electronic and phonon properties. Here we show that graphene's electronic structure is uniquely capt…
▽ More
Graphene is the two-dimensional (2d) building block for carbon allotropes of every other dimensionality. It can be stacked into 3d graphite, rolled into 1d nanotubes, or wrapped into 0d fullerenes. Its recent discovery in free state has finally provided the possibility to study experimentally its electronic and phonon properties. Here we show that graphene's electronic structure is uniquely captured in its Raman spectrum that clearly evolves with increasing number of layers. Raman fingerprints for single-, bi- and few-layer graphene reflect changes in the electronic structure and electron-phonon interactions and allow unambiguous, high-throughput, non-destructive identification of graphene layers, which is critically lacking in this emerging research area.
△ Less
Submitted 12 June, 2006;
originally announced June 2006.
-
Vertical quantum wire realized with double cleaved-edge overgrowth
Authors:
S. F. Roth,
H. J. Krenner,
D. Schuh,
M. Bichler,
M. Grayson
Abstract:
A quantum wire is fabricated on (001)-GaAs at the intersection of two overgrown cleaves. The wire is contacted at each end to n+ GaAs layers via two-dimensional (2D) leads. A sidegate controls the density of the wire revealing conductance quantization. The step height is strongly reduced from 2e^2/h due to the 2D-lead series resistance. We characterize the 2D density and mobility for both cleave…
▽ More
A quantum wire is fabricated on (001)-GaAs at the intersection of two overgrown cleaves. The wire is contacted at each end to n+ GaAs layers via two-dimensional (2D) leads. A sidegate controls the density of the wire revealing conductance quantization. The step height is strongly reduced from 2e^2/h due to the 2D-lead series resistance. We characterize the 2D density and mobility for both cleave facets with four-point measurements. The density on the first facet is modulated by the substrate potential, depleting a 2um wide strip that defines the wire length. Micro-photoluminescence shows an extra peak consistent with 1D electron states at the corner.
△ Less
Submitted 4 April, 2006;
originally announced April 2006.
-
Nitrogen do** of metallic single-walled carbon nanotubes: n-type conduction and dipole scattering
Authors:
V. Krstic,
G. L. J. A. Rikken,
P. Bernier,
S. Roth,
M. Glerup
Abstract:
The charge transport properties of individual, metallic nitrogen doped, single-walled carbon nanotubes are investigated. It is demonstrated that n-type conduction can be achieved by nitrogen do**. Evidence was obtained by appealing to electric-field effect measurements at ambient condition. The observed temperature dependencies of the zero-bias conductance indicate a disordered electron system…
▽ More
The charge transport properties of individual, metallic nitrogen doped, single-walled carbon nanotubes are investigated. It is demonstrated that n-type conduction can be achieved by nitrogen do**. Evidence was obtained by appealing to electric-field effect measurements at ambient condition. The observed temperature dependencies of the zero-bias conductance indicate a disordered electron system with electric-dipole scattering, caused mainly by the pyridine-type nitrogen atoms in the honeycomb lattice. These results illustrate the possibility of creating all-metallic molecular devices, in which the charge carrier type can be controlled.
△ Less
Submitted 23 January, 2006;
originally announced January 2006.
-
Four-point measurements of n- and p-type two-dimensional systems fabricated with cleaved-edge overgrowth
Authors:
M. Grayson,
S. F. Roth,
Y. Xiang,
F. Fischer,
D. Schuh,
M. Bichler
Abstract:
We demonstrate a contact design that allows four-terminal magnetotransport measurements of cleaved-edge overgrown two-dimensional electron and hole systems. By lithographically patterning and etching a bulk-doped surface layer, finger-shaped leads are fabricated, which contact the two-dimensional systems on the cleave facet. Both n- and p-type two-dimensional systems are demonstrated at the clea…
▽ More
We demonstrate a contact design that allows four-terminal magnetotransport measurements of cleaved-edge overgrown two-dimensional electron and hole systems. By lithographically patterning and etching a bulk-doped surface layer, finger-shaped leads are fabricated, which contact the two-dimensional systems on the cleave facet. Both n- and p-type two-dimensional systems are demonstrated at the cleaved edge, using Si as either donor or acceptor, dependent on the growth conditions. Four-point measurements of both gated and modulation-doped samples yield fractional quantum Hall features for both n- and p-type, with several higher-order fractions evident in n-type modulation-doped samples.
△ Less
Submitted 2 November, 2005;
originally announced November 2005.
-
Raman-modes of index-identified free-standing single-walled carbon nanotubes
Authors:
Jannik C. Meyer,
Matthieu Paillet,
Thierry Michel,
Alain Moreac,
Anita Neumann,
Georg S. Duesberg,
Siegmar Roth,
Jean-Louis Sauvajol
Abstract:
Using electron diffraction on free-standing single-walled carbon nanotubes we have determined the structural indices (n,m) of tubes in the diameter range from 1.4 to 3nm. On the same free-standing tubes we have recorded Raman spectra of the tangential modes and the radial breathing mode. For the smaller diameters (1.4-1.7nm) these measurements confirm previously established radial breathing mode…
▽ More
Using electron diffraction on free-standing single-walled carbon nanotubes we have determined the structural indices (n,m) of tubes in the diameter range from 1.4 to 3nm. On the same free-standing tubes we have recorded Raman spectra of the tangential modes and the radial breathing mode. For the smaller diameters (1.4-1.7nm) these measurements confirm previously established radial breathing mode frequency versus diameter relations, and would be consistent with the theoretically predicted proportionality to the inverse diameter. However, for extending the relation to larger diameters, either a yet unexplained environmental constant has to be assumed, or the linear relation has to be abandoned.
△ Less
Submitted 24 June, 2005;
originally announced June 2005.
-
Electron diffraction analysis of individual single-walled carbon nanotubes
Authors:
Jannik C. Meyer,
Matthieu Paillet,
Georg S. Duesberg,
Siegmar Roth
Abstract:
We present a detailed electron diffraction study of individual single-walled carbon nanotubes. A novel sample preparation procedure provides well-separated, long and straight individual single-shell nanotubes. Diffraction experiments are carried out at 60kV, below the threshold for knock-on damage in carbon nanotubes. We describe experimental parameters that allow single-tube electron diffractio…
▽ More
We present a detailed electron diffraction study of individual single-walled carbon nanotubes. A novel sample preparation procedure provides well-separated, long and straight individual single-shell nanotubes. Diffraction experiments are carried out at 60kV, below the threshold for knock-on damage in carbon nanotubes. We describe experimental parameters that allow single-tube electron diffraction experiments with widely available thermal emission transmission electron microscopes. Further, we review the simulation of diffraction patterns for these objects.
△ Less
Submitted 14 August, 2005; v1 submitted 15 June, 2005;
originally announced June 2005.
-
Lattice structure and vibrational properties of the same nano-object
Authors:
Jannik C. Meyer,
Matthieu Paillet,
Jean-Lous Sauvajol,
Georg S. Duesberg,
Siegmar Roth
Abstract:
We present a procedure for determining independently the lattice structure and the vibrational properties of the same individual nano-object. For the example of an individual single-walled carbon nanotube we demonstrate the determination of the structural indices (n,m) of the nanotube by electron diffraction and of the frequencies of vibrational modes by micro-Raman spectroscopy. The precise and…
▽ More
We present a procedure for determining independently the lattice structure and the vibrational properties of the same individual nano-object. For the example of an individual single-walled carbon nanotube we demonstrate the determination of the structural indices (n,m) of the nanotube by electron diffraction and of the frequencies of vibrational modes by micro-Raman spectroscopy. The precise and independent determination of both structure and mode frequencies allows for direct and unambiguous verification of molecular dynamical calculations and of conclusions drawn from Raman-only experiments.
△ Less
Submitted 17 January, 2005; v1 submitted 14 January, 2005;
originally announced January 2005.
-
Nonlinear behavior in the Thermopower of Doped Carbon Nanotubes Due to Strong, Localized States
Authors:
Y. -M Choi,
D. -S. Lee,
R. Czerw,
P. -W. Chiu,
N. Grobert,
M. Terrones,
M. Reyes-Reyes,
H. Terrones,
J. -C. Charlier,
P. M. Ajayan,
S. Roth,
D. L. Carroll,
Y. -W. Park
Abstract:
The temperature dependent thermoelectric power (TEP) of boron and nitrogen doped multi-walled carbon nanotube mats has been measured showing that such dopants can be used to modify the majority conduction from p-type to n-type. The TEP of boron doped nanotubes is positive, indicating hole-like carriers. In contrast, the nitrogen doped material exhibits negative TEP over the same temperature rang…
▽ More
The temperature dependent thermoelectric power (TEP) of boron and nitrogen doped multi-walled carbon nanotube mats has been measured showing that such dopants can be used to modify the majority conduction from p-type to n-type. The TEP of boron doped nanotubes is positive, indicating hole-like carriers. In contrast, the nitrogen doped material exhibits negative TEP over the same temperature range, suggesting electron-like conduction. Therefore, the TEP distinct nonlinearites are primarily due to the formation of donor and acceptor states in the B- and N- doped materials. The sharply varying density of states used in our model can be directly correlated to the scanning tunneling spectroscopy studies of these materials.
△ Less
Submitted 11 April, 2002;
originally announced April 2002.
-
Propylene Carbonate Reexamined: Mode-Coupling $β$ Scaling without Factorisation ?
Authors:
J. Wuttke,
M. Ohl,
M. Goldammer,
S. Roth,
U. Schneider,
P. Lunkenheimer,
R. Kahn,
B. Rufflé,
R. Lechner,
M. A. Berg
Abstract:
The dynamic susceptibility of propylene carbonate in the moderately viscous regime above $T_{\rm c}$ is reinvestigated by incoherent neutron and depolarised light scattering, and compared to dielectric loss and solvation response. Depending on the strength of $α$ relaxation, a more or less extended $β$ scaling regime is found. Mode-coupling fits yield consistently $λ=0.72$ and $T_{\rm c}=182 $K,…
▽ More
The dynamic susceptibility of propylene carbonate in the moderately viscous regime above $T_{\rm c}$ is reinvestigated by incoherent neutron and depolarised light scattering, and compared to dielectric loss and solvation response. Depending on the strength of $α$ relaxation, a more or less extended $β$ scaling regime is found. Mode-coupling fits yield consistently $λ=0.72$ and $T_{\rm c}=182 $K, although different positions of the susceptibility minimum indicate that not all observables have reached the universal asymptotics.
△ Less
Submitted 31 August, 1999;
originally announced August 1999.
