-
Feeders and Expellers, Two Types of Animalcules With Outboard Cilia, Have Distinct Surface Interactions
Authors:
Praneet Prakash,
Marco Vona,
Raymond E. Goldstein
Abstract:
Within biological fluid dynamics, it is conventional to distinguish between "puller" and "pusher" microswimmers on the basis of the forward or aft location of the flagella relative to the cell body: typically, bacteria are pushers and algae are pullers. Here we note that since many pullers have "outboard" cilia or flagella displaced laterally from the cell centerline on both sides of the organism,…
▽ More
Within biological fluid dynamics, it is conventional to distinguish between "puller" and "pusher" microswimmers on the basis of the forward or aft location of the flagella relative to the cell body: typically, bacteria are pushers and algae are pullers. Here we note that since many pullers have "outboard" cilia or flagella displaced laterally from the cell centerline on both sides of the organism, there are two important subclasses whose far-field is that of a stresslet, but whose near field is qualitatively more complex. The ciliary beat creates not only a propulsive force but also swirling flows that can be represented by paired rotlets with two possible senses of rotation, either "feeders" that sweep fluid toward the cell apex, or "expellers" that push fluid away. Experimental studies of the rotifer $Brachionus~plicatilis$ in combination with earlier work on the green algae $Chlamydomonas~reinhardtii$ show that the two classes have markedly different interactions with surfaces. When swimming near a surface, expellers such as $C.~reinhardtii$ scatter from the wall, whereas a feeder like $B.~plicatilis$ stably attaches. This results in a stochastic "run-and-stick" locomotion, with periods of ballistic motion parallel to the surface interrupted by trap** at the surface.
△ Less
Submitted 29 June, 2024;
originally announced July 2024.
-
Anti-Diffusion in an Algae-Bacteria Microcosm: Photosynthesis, Chemotaxis, and Expulsion
Authors:
Praneet Prakash,
Yasa Baig,
Francois J. Peaudecerf,
Raymond E. Goldstein
Abstract:
In Nature there are significant relationships known between microorganisms from two kingdoms of life, as in the supply of vitamin B$_{12}$ by bacteria to algae. Such interactions motivate general investigations into the spatio-temporal dynamics of metabolite exchanges. Here we study by experiment and theory a model system: a coculture of the bacterium $B. subtilis$, an obligate aerobe that is chem…
▽ More
In Nature there are significant relationships known between microorganisms from two kingdoms of life, as in the supply of vitamin B$_{12}$ by bacteria to algae. Such interactions motivate general investigations into the spatio-temporal dynamics of metabolite exchanges. Here we study by experiment and theory a model system: a coculture of the bacterium $B. subtilis$, an obligate aerobe that is chemotactic to oxygen, and a nonmotile mutant of the alga $C. reinhardtii$, which photosynthetically produces oxygen when illuminated. Strikingly, when a shaft of light illuminates a thin, initially uniform suspension of the two, the chemotactic influx of bacteria to the photosynthetically active region leads to expulsion of the algae from that area. This effect arises from algal transport due to spatially-varying collective behavior of bacteria, and is mathematically related to the ``turbulent diamagnetism" associated with magnetic flux expulsion in stars.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Contact Force Mediated Rapid Deposition of Colloidal Microspheres Flowing Over Microstructured Barriers
Authors:
P. Prakash,
A. Z. Abdulla,
M. Varma
Abstract:
Deposition of particles while flowing past constrictions is a ubiquitous phenomenon observed in diverse systems. Some common examples are jamming of salt crystals near the orifice of saltshakers, clogging of filter systems, gridlock in vehicular traffic etc. Our work investigates the deposition events of colloidal microspheres flowing over microstructured barriers in microfluidic devices. The inte…
▽ More
Deposition of particles while flowing past constrictions is a ubiquitous phenomenon observed in diverse systems. Some common examples are jamming of salt crystals near the orifice of saltshakers, clogging of filter systems, gridlock in vehicular traffic etc. Our work investigates the deposition events of colloidal microspheres flowing over microstructured barriers in microfluidic devices. The interplay of DLVO, contact and hydrodynamic forces in facilitating rapid deposition of microspheres is discussed. Noticeably, a decrease in the electrostatic repulsion among microspheres leads to linear chain formations, whereas an increase in roughness results in rapid deposition.
△ Less
Submitted 7 December, 2021;
originally announced December 2021.
-
Rapid accumulation of colloidal microspheres flowing over microfabricated barriers
Authors:
P. Prakash,
A. Z. Abdulla,
M. Varma
Abstract:
Accumulation of particles while flowing past constrictions is a ubiquitous phenomenon observed in diverse systems. Some of the common examples are jamming of salt crystals near the orifice of salt shakers, clogging of filter systems, gridlock in traffics etc. For controlled studies, accumulation events are often examined as clogging process in microfluidic channels. Experimental studies thus far h…
▽ More
Accumulation of particles while flowing past constrictions is a ubiquitous phenomenon observed in diverse systems. Some of the common examples are jamming of salt crystals near the orifice of salt shakers, clogging of filter systems, gridlock in traffics etc. For controlled studies, accumulation events are often examined as clogging process in microfluidic channels. Experimental studies thus far have provided with various physical insights, however, they fail to address commonly encountered accumulation events relevant to human health such as dental and arterial plaques. We simulate arterial plaque like accumulation events by flowing colloidal microspheres over micro-structured barriers in microfluidic environment. Our experiments reveal the role of electrostatic, contact and hydrodynamic forces in facilitating plaque-like build up events. A decrease in Debye length (electrostatic repulsion) between interacting surface by two orders leads to only a minor increase in accumulation. In contrast, an increase in the roughness by 3 times results in dramatic rise of accumulation.
△ Less
Submitted 27 May, 2020;
originally announced May 2020.
-
Swimming statistics of cargo-loaded single bacteria
Authors:
P. Prakash,
A. Z. Abdulla,
V. Singh,
M. Varma
Abstract:
Burgeoning interest in the area of bacteria-powered micro robotic systems prompted us to study the dynamics of cargo transport by single bacteria. In this paper, we have studied the swimming behaviour of oil-droplets attached as a cargo to the cell bodies of single bacteria. The oil-droplet loaded bacteria exhibit super-diffusive motion which is characterized by high degree of directional persiste…
▽ More
Burgeoning interest in the area of bacteria-powered micro robotic systems prompted us to study the dynamics of cargo transport by single bacteria. In this paper, we have studied the swimming behaviour of oil-droplets attached as a cargo to the cell bodies of single bacteria. The oil-droplet loaded bacteria exhibit super-diffusive motion which is characterized by high degree of directional persistence. Interestingly, bacteria could navigate even when loaded with oil-droplets as large as 8 microns with an effective increase in rotational drag by more than 2 orders when compared to free bacteria. Further, the directional persistence of oil-droplet loaded bacteria was independent of the cargo size.
△ Less
Submitted 25 May, 2020;
originally announced May 2020.
-
Tuning the torque-speed characteristics of bacterial flagellar motor to enhance the swimming speed
Authors:
Praneet Prakash,
Amith Z. Abdulla,
Varsha Singh,
Manoj Varma
Abstract:
In a classic paper, Edward Purcell analysed the dynamics of flagellated bacterial swimmers and derived a geometrical relationship which optimizes the propulsion efficiency. Experimental measurements for wild-type bacterial species E. coli have revealed that they closely satisfy this geometric optimality. However, the dependence of the flagellar motor speed on the load and more generally the role o…
▽ More
In a classic paper, Edward Purcell analysed the dynamics of flagellated bacterial swimmers and derived a geometrical relationship which optimizes the propulsion efficiency. Experimental measurements for wild-type bacterial species E. coli have revealed that they closely satisfy this geometric optimality. However, the dependence of the flagellar motor speed on the load and more generally the role of the torque-speed characteristics of the flagellar motor is not considered in Purcell's original analysis. Here we derive a tuned condition representing a match between the flagella geometry and the torque-speed characteristics of the flagellar motor to maximize the bacterial swimming speed for a given load. This condition is independent of the geometric optimality condition derived by Purcell and interestingly this condition is not satisfied by wild-type E. coli which swim 2-3 times slower than the maximum possible speed given the amount of available motor torque. Our analysis also reveals the existence of an anomalous propulsion regime, where the swim speed increases with increasing load (drag). Finally, we present experimental data which supports our analysis.
△ Less
Submitted 7 August, 2019; v1 submitted 4 January, 2019;
originally announced January 2019.
-
Probing the multi spin-phonon coupling and local B-site disorder in Pr2CoFeO6 by Raman spectroscopy and correlation with its electronic structure by X-ray photoemission spectroscopy
Authors:
Arkadeb Pal,
Surajit Ghosh,
Amish G. Joshi,
P. K. Gupta,
P. Prakash,
Amitabh Das,
A. K. Ghosh,
Sandip Chatterjee
Abstract:
Electronic structure near Fermi level of Pr2CoFeO6 (at 300 K) was investigated by X-ray photoemission spectroscopy (XPS) technique. All three cations, i.e., Pr, Co and Fe were found to be trivalent in nature. XPS analysis also suggested the system to be insulating in nature. Moreover, Raman spectroscopy study indicated the random distribution of the B-site ions (Co/Fe) triggered by same charge sta…
▽ More
Electronic structure near Fermi level of Pr2CoFeO6 (at 300 K) was investigated by X-ray photoemission spectroscopy (XPS) technique. All three cations, i.e., Pr, Co and Fe were found to be trivalent in nature. XPS analysis also suggested the system to be insulating in nature. Moreover, Raman spectroscopy study indicated the random distribution of the B-site ions (Co/Fe) triggered by same charge states. In temperature-dependent Raman study, the relative heights of the two observed phonon modes exhibited anomalous behaviour near magnetic transition temperature TN~270 K, thus indicating towards interplay between spin and phonon in the system. Furthermore, clear anomalous softening was observed below TN which confirmed the existence of strong spin-phonon coupling occurring for at least two phonon modes of the system. The line width analysis of the phonon modes essentially ruled out the role of magnetostriction effect in the observed phonon anomaly. The investigation of the lattice parameter variation across TN (obtained from the temperature-dependent neutron diffraction measurements) further confirmed the existence of the spin-phonon coupling.
△ Less
Submitted 2 January, 2019;
originally announced January 2019.
-
Trap**/Pinning of colloidal microspheres over glass substrate using surface features
Authors:
Praneet Prakash,
Manoj Varma
Abstract:
Suspensions of micro and nano particles made of Polystyrene, Poly(methyl methacrylate), Silicon dioxide etc. have been a standard model system to understand colloidal physics. . These systems have proved useful insights into phenomena such as self-assembly. Colloidal model systems are also extensively used to simulate many condensed matter phenomena such as dynamics in a quenched disordered system…
▽ More
Suspensions of micro and nano particles made of Polystyrene, Poly(methyl methacrylate), Silicon dioxide etc. have been a standard model system to understand colloidal physics. . These systems have proved useful insights into phenomena such as self-assembly. Colloidal model systems are also extensively used to simulate many condensed matter phenomena such as dynamics in a quenched disordered system and glass transition. A precise control of particles using optical or holographic tweezers is essential for such studies. However, studies of collective phenomena such as jamming and flocking behaviour in a disordered space are limited due to the low throughput of the optical trap** techniques.In this article, we present a technique where we trap and pin polystyrene microspheres ~ 10 μm over triangular-crest shaped microstructures in a microfluidic environment. Trap**/Pinning occurs due to the combined effect of hydrodynamic interaction and non-specific adhesion forces. This method allows trap** and pinning of microspheres in any arbitrary pattern with a high degree of spatial accuracy which can be useful in studying fundamentals of various collective phenomena as well as in applications such as bead detachment assay based biosensors.
△ Less
Submitted 3 October, 2017;
originally announced October 2017.
-
Effect of heat source on the growth of dendritic drying patterns
Authors:
Kiran M. Kolwankar,
Pulkit Prakash,
Shruthi Radhakrishnan,
Swadhini Sahu,
Aditya K. Dharmadhikari,
Jayashree A. Dharmadhikari,
Deepak Mathur
Abstract:
Shining a tightly-focused but low-powered laser beam on an absorber dispersed in a biological fluid gives rise to spectacular growth of dendritic patterns. These result from localized drying of the fluid because of efficient absorption and conduction of optical energy by the absorber. We have carried out experiments in several biologically relevant fluids and have analyzed patterns generated by di…
▽ More
Shining a tightly-focused but low-powered laser beam on an absorber dispersed in a biological fluid gives rise to spectacular growth of dendritic patterns. These result from localized drying of the fluid because of efficient absorption and conduction of optical energy by the absorber. We have carried out experiments in several biologically relevant fluids and have analyzed patterns generated by different types of absorbers. We observe that the growth velocity of branches in the dendritic patterns can decrease below the value expected for natural drying.
△ Less
Submitted 20 December, 2014;
originally announced December 2014.
-
Design and Development of Surface Modified p and n Type Silicon Sensor for Nitrogen Gas Flow Measurement
Authors:
U. Satheesh,
P. Prakash,
D. Devaprakasam
Abstract:
We report a gas flow driven voltage generation of Octyltrichlorosilane (OTS) molecules self assembled on silicon wafers (Si wafers). OTS Self assembled Monolayer (SAM) has been coated on both p-type and n-type doped silicon wafers (p-Si and n-Si wafers) using dip coating method. We have measured the flow induced voltage generation on OTS SAM coated Si wafers/ Uncoated Si wafers at modest gas flow…
▽ More
We report a gas flow driven voltage generation of Octyltrichlorosilane (OTS) molecules self assembled on silicon wafers (Si wafers). OTS Self assembled Monolayer (SAM) has been coated on both p-type and n-type doped silicon wafers (p-Si and n-Si wafers) using dip coating method. We have measured the flow induced voltage generation on OTS SAM coated Si wafers/ Uncoated Si wafers at modest gas flow velocities of subsonic regime (Mach number < 0.2) using national instruments NI-PXI-1044 Workstation. The gas flow driven voltage generation is mainly due to the interplay mechanisms of Bernoulli principle and Seebeck effect. The surface morphology of OTS SAM coated p-Si and n-Si wafers were characterized by SEM analysis. In this study, our results shows that OTS SAM coated p-Si and n-Si wafers shows better sensitivity towards nitrogen gas flow when compared with the uncoated Si wafers. OTS SAM also exhibits high thermal stability and hydrophobicity.
△ Less
Submitted 23 September, 2014;
originally announced September 2014.
-
Study of High Temperature Thermal Behavior of Alkyl and Perfluoroalkylsilane Molecules Self-Assembled on Titanium Oxide Nanoparticles
Authors:
P. Prakash,
U. Satheesh,
D. Devaprakasam
Abstract:
We have studied high temperature thermal behavior of 1H, 1H, 2H, 2H-Perfluorooctyl-trichlorosilane (FOTS) and Octyltrichlorosilane (OTS) molecules self assembled on titanium dioxide (TiO2) nanoparticles using advanced microscopy and spectroscopy technique such as Scanning Electron Microscope (SEM), Dynamic Light Scattering (DLS), X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy…
▽ More
We have studied high temperature thermal behavior of 1H, 1H, 2H, 2H-Perfluorooctyl-trichlorosilane (FOTS) and Octyltrichlorosilane (OTS) molecules self assembled on titanium dioxide (TiO2) nanoparticles using advanced microscopy and spectroscopy technique such as Scanning Electron Microscope (SEM), Dynamic Light Scattering (DLS), X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR). FOTS SAM and OTS SAM coated TiO2 nanoparticles were heated to different temperature range from room temperature (RT) to 550oC. We characterized nano-microstructure and size distribution of FOTS SAM and OTS SAM coated TiO2 nanoparticles, which were heat-treated to different peak temperatures, using SEM and DLS techniques. The thermal stability and degradation of FOTS SAM and OTS SAM coated TiO2 were carried out using FTIR spectroscopy. We found that FOTS SAM on TiO2 is very stable up to 450oC and OTS on TiO2 is stable up to 250oC. Peak frequency, peak intensity and full width half maxima (FWHM) of symmetric and asymmetric CF2 and CH2 confirms our observation. In this study, we successfully synergized the surface and temperature sensitive characteristics of FOTS/OTS SAM and TiO2 nanoparticles in order to use them for highly demanding surface and temperature sensitive nanotechnology applications
△ Less
Submitted 1 October, 2014; v1 submitted 24 September, 2014;
originally announced September 2014.
-
RNA polymerase motor on DNA track: effects of interactions, external force and torque
Authors:
Tripti Tripathi,
Prasanjit Prakash,
Debashish Chowdhury
Abstract:
RNA polymerase (RNAP) is a mobile molecular workshop that polymerizes a RNA molecule by adding monomeric subunits one by one, while moving step by step on the DNA template itself. Here we develop a theoretical model by incorporating the steric interactions of the RNAPs and their mechanochemical cycles which explicitly captures the cyclical shape changes of each motor. Using this model, we explai…
▽ More
RNA polymerase (RNAP) is a mobile molecular workshop that polymerizes a RNA molecule by adding monomeric subunits one by one, while moving step by step on the DNA template itself. Here we develop a theoretical model by incorporating the steric interactions of the RNAPs and their mechanochemical cycles which explicitly captures the cyclical shape changes of each motor. Using this model, we explain not only the dependence of the average velocity of a RNAP on the externally applied load force, but also predict a {\it nonmotonic} variation of the average velocity on external torque. We also show the effect of steric interactions of the motors on the total rate of RNA synthesis. In principle, our predictions can be tested by carrying out {\it in-vitro} experiments which we suggest here.
△ Less
Submitted 4 June, 2009; v1 submitted 26 December, 2008;
originally announced December 2008.