Showing 1–50 of 106 results for author: Peng, J

All-voltage control of Giant Magnetoresistance

Authors: Lujun Wei, Yiyang Zhang, Fei Huang, Jiajv Yang, **cheng Peng, Yanghui Li, Yu Lu, Jiarui Chen, Tianyu Liu, Yong Pu, Jun Du

Abstract: The aim of voltage control of magnetism is to reduce the power consumption of spintronic devices. For a spin valve, the magnetization directions of two ferromagnetic layers determine the giant magnetoresistance magnitude. However, achieving all-voltage manipulation of the magnetization directions between parallel and antiparallel states is a significant challenge. Here, we demonstrate that by util… ▽ More The aim of voltage control of magnetism is to reduce the power consumption of spintronic devices. For a spin valve, the magnetization directions of two ferromagnetic layers determine the giant magnetoresistance magnitude. However, achieving all-voltage manipulation of the magnetization directions between parallel and antiparallel states is a significant challenge. Here, we demonstrate that by utilizing two exchange-biased Co/IrMn bilayers with opposite pinning directions and with ferromagnetic coupling through the Ruderman-Kittel-Kasuya-Yosida interaction between two Co layers, the magnetization directions of the two ferromagnetic layers of a spin valve can be switched between parallel and antiparallel states through allvoltage-induced strain control. The all-voltage controlled giant magnetoresistance is repeatable and nonvolatile. The rotation of magnetizations in the two Co layers under voltages, from antiparallel to parallel states, occurs in opposite directions as revealed through simulations utilizing the Landau-Lifshitz-Gilbert equation. This work can provide valuable reference for the development of low-power all-voltage-controlled spintronic devices. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Spin-polarized p-wave superconductivity in the kagome material RbV$_3$Sb$_5$

Authors: Shuo Wang, Xilin Feng, **g-Zhi Fang, Jia-Peng Peng, Zi-Ting Sun, Jia-Jie Yang, **gchao Liu, Jia-Ji Zhao, Jian-Kun Wang, Xin-Jie Liu, Ze-Nan Wu, Shengbiao Sun, Ning Kang, Xiao-Song Wu, Zhensheng Zhang, Xuewen Fu, Kam Tuen Law, Ben-Chuan Lin, Dapeng Yu

Abstract: The study of kagome materials has attracted much attention in the past few years due to the presence of many electron-electron interaction-driven phases in a single material.In this work, we report the discovery of intrinsic spin-polarized p-wave superconductivity in the thin-flake kagome material RbV$_3$Sb$_5$. Firstly, when an in-plane magnetic field is swept in opposite directions, we observe a… ▽ More The study of kagome materials has attracted much attention in the past few years due to the presence of many electron-electron interaction-driven phases in a single material.In this work, we report the discovery of intrinsic spin-polarized p-wave superconductivity in the thin-flake kagome material RbV$_3$Sb$_5$. Firstly, when an in-plane magnetic field is swept in opposite directions, we observe a unique form of hysteresis in magnetoresistance which is different from the hysteresis induced by extrinsic mechanisms such as flux-trap** or superheating and supercooling effects. The unconventional hysteresis indicates the emergence of an intrinsic time-reversal symmetry-breaking superconducting phase. Strikingly, at a fixed magnetic field, the finite-resistance state can be quenched to the zero-resistance state by applying a large current. Secondly, at temperatures around 400 mK, the re-entrance of superconductivity occurs during an in-plane field-swee** process with a fixed swee** direction. This kind of re-entrance is asymmetric about the zero field axis and observed in all field directions for a fixed current direction, which is different from the re-entrance observed in conventional superconductors. Moreover, the angle-dependent in-plane critical field measurements reveal a two-fold symmetry that deviates from the original, centrosymmetric D$_{6h}$ point group symmetry of the crystal. These findings put very strong constraints on the possible superconducting pairing symmetry of RbV$_3$Sb$_5$. We point out that the pairing symmetry, which is consistent with the crystal symmetry and all the observed novel properties, is a time-reversal symmetry-breaking, p-wave pairing with net spin polarization. Importantly, this p-wave pairing gives rise to a nodal topological superconducting state with Majorana flat bands on the sample edges. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: 21 pages, 4 figures

Magnetic structure and magnetoelectric coupling in antiferromagnet Co5(TeO3)4Cl2

Authors: B. Yu, L. Huang, J. S. Li, L. Lin, V. Ovidiu Garlea, Q. Zhang, T. Zou, J. C. Zhang, J. Peng, Y. S. Tang, G. Z. Zhou, J. H. Zhang, S. H. Zheng, M. F. Liu, Z. B. Yan, X. H. Zhou, S. Dong, J. G. Wan, J. -M. Liu

Abstract: The van der Waals (vdW) layered multiferroics, which host simultaneous ferroelectric and magnetic orders, have attracted attention not only for their potentials to be utilized in nanoelectric devices and spintronics, but also offer alternative opportunities for emergent physical phenomena. To date, the vdW layered multiferroic materials are still very rare. In this work, we have investigated the m… ▽ More The van der Waals (vdW) layered multiferroics, which host simultaneous ferroelectric and magnetic orders, have attracted attention not only for their potentials to be utilized in nanoelectric devices and spintronics, but also offer alternative opportunities for emergent physical phenomena. To date, the vdW layered multiferroic materials are still very rare. In this work, we have investigated the magnetic structure and magnetoelectric effects in Co5(TeO3)4Cl2, a promising new multiferroic compound with antiferromagnetic (AFM) Neel point TN = 18 K. The neutron powder diffraction reveals the non-coplanar AFM state with preferred Neel vector along the c-axis, while a spin re-orientation occurring between 8 K and 15 K is identified, which results from the distinct temperature dependence of the non-equivalent Co sites moment in Co5(TeO3)4Cl2. What is more, it is found that Co5(TeO3)4Cl2 is one of the best vdW multiferroics studied so far in terms of the multiferroic performance. The measured linear ME coefficient exhibits the emergent oscillation dependence of the angle between magnetic field and electric field, and the maximal value is as big as 45 ps/m. It is suggested that Co5(TeO3)4Cl2 is an appreciated platform for exploring the emergent multiferroicity in vdW layered compounds. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 31 pages, 9 figures

Journal ref: Phys. Rev. B 109, 184106(2024)

Effect of electron-phonon coupling on thermal transport in metals: a Monte Carlo approach for solving the coupled electron-phonon Boltzmann transport equations

Authors: Jie Peng, W. Ryan Deskins, Maria Helena Braga, Anter El-Azab

Abstract: In this work, the effect of electron-phonon (e-ph) coupling on both electron and phonon transport of metals is investigated via first principles calculations. A Monte-Carlo (MC) approach for solving the coupled electron-phonon Boltzmann transport equations is developed to investigate thermal conductivity of metals. In this approach, the anisotropic electron band structure, phonon dispersion in the… ▽ More In this work, the effect of electron-phonon (e-ph) coupling on both electron and phonon transport of metals is investigated via first principles calculations. A Monte-Carlo (MC) approach for solving the coupled electron-phonon Boltzmann transport equations is developed to investigate thermal conductivity of metals. In this approach, the anisotropic electron band structure, phonon dispersion in the full Brillouin zone, and mode-dependent thermal relaxation time of electrons and phonons are calculated from first principles. Using this approach, MC simulations of coupled e-ph thermal transport at different temperatures in α-U and Ag are performed. These two materials were selected as a way to demonstrate the applicability of the method in different fields. The results indicate that the electron relaxation time due to phonon scattering is orders of magnitude smaller than the phonon relaxation time due to electron scattering. The results also show that, in phonon thermal transport, the impact of ph-e scattering is almost negligible and the ph-ph scattering dominates phonon transport. At high temperature, the electrons dominate thermal transport in both α-U and Ag. However, at low temperature, the phonon contribution to the total thermal conductivity of α-U is significant. Moreover, the Lorenz ratio deviates from the Sommerfeld value at low to intermediate temperatures, where the Wiedemann-Franz law is not applicable. Finally, we show that the Ag electronic thermal conductivity shows a stronger size effect than its phonon thermal conductivity. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Comments: 36 Pages, 14 Figures

Moment-Tensor-Based Constant-Potential Modeling of Electrical Double Layers

Authors: Zhenxiang Wang, Ming Chen, Jiedu Wu, Xiangyu Ji, Liang Zeng, Jiaxing Peng, Jiawei Yan, Alexei A. Kornyshev, Bingwei Mao, Guang Feng

Abstract: Constant-potential molecular dynamics (MD) simulations are indispensable for understanding the capacitance, structure, and dynamics of electrical double layers (EDLs) at the atomistic level. However, the classical constant-potential method, relying on the so-called 'floating charges' to keep electrode equipotential, overlooks quantum effects on the electrode and always underestimates EDL capacitan… ▽ More Constant-potential molecular dynamics (MD) simulations are indispensable for understanding the capacitance, structure, and dynamics of electrical double layers (EDLs) at the atomistic level. However, the classical constant-potential method, relying on the so-called 'floating charges' to keep electrode equipotential, overlooks quantum effects on the electrode and always underestimates EDL capacitance for typical electrochemical systems featuring metal electrodes in aqueous electrolytes. Here, we propose a universal theoretical framework as moment-tensor-based constant potential method (mCPM) to capture electronic structure variations with electric moments. For EDLs at Au(111) electrodes, mCPM-based MD reveals bell-shaped capacitance curves in magnitude and shape both quantitatively consistent with experiments. It further unveils the potential-dependent local electric fields, agreeing with experimental observations of redshift vibration of interfacial water under negative polarization and predicting a blueshift under positive polarization, and identifies geometry dependence of two time scales during EDL formation. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Influence of slope angle on deposit morphology and propagation of laboratory landslides

Authors: Yan-Bin Wu, Zhao Duan, Jian-Bing Peng, Qing Zhang, Thomas Pähtz

Abstract: Landslide deposits often exhibit surface features, such as transverse ridges and X-shaped conjugate troughs, whose physical formation origins are not well understood. To study the deposit morphology, laboratory studies typically focus on the simplest landslide geometry: an inclined plane accelerating the sliding mass immediately followed by its deceleration on a horizontal plane. However, existing… ▽ More Landslide deposits often exhibit surface features, such as transverse ridges and X-shaped conjugate troughs, whose physical formation origins are not well understood. To study the deposit morphology, laboratory studies typically focus on the simplest landslide geometry: an inclined plane accelerating the sliding mass immediately followed by its deceleration on a horizontal plane. However, existing experiments have been conducted only for a limited range of the slope angle $θ$. Here, we study the effect of $θ$ on the kinematics and deposit morphology of laboratory landslides along a low-friction base, measured using an advanced 3D scanner. At low $θ$ (30°-35°), we find transverse ridges formed by overthrusting on the landslide deposits. At moderate $θ$ (40°-55°), conjugate troughs form. A Mohr-Coulomb failure model predicts the angle enclosed by the X-shaped troughs as 90°-$φ$, with $φ$ the internal friction angle, in agreement with our experiments and a natural landslide. This supports the speculation that conjugate troughs form due to failure associated with a triaxial shear stress. At high $θ$ (60°-85°), a double-upheaval morphology forms because the rear of the sliding mass impacts the front during the transition from the slope to the horizontal plane. The overall surface area of the landslides increases during their downslope motion and then decreases during their runout. △ Less

Submitted 11 June, 2023; originally announced June 2023.

Journal ref: Scientific Reports 13, 9452 (2023)

Atom-by-atom design of metal oxide catalysts for the oxygen evolution reaction with machine learning

Authors: Jaclyn R. Lunger, Jessica Karaguesian, Hoje Chun, Jiayu Peng, Yitong Tseo, Chung Hsuan Shan, Byungchan Han, Yang Shao-Horn, Rafael Gomez-Bombarelli

Abstract: Green hydrogen production is crucial for a sustainable future, but current catalysts for the oxygen evolution reaction (OER) suffer from slow kinetics, despite many efforts to produce optimal designs, particularly through the calculation of descriptors for activity. In this study, we develop a dataset of density functional theory calculations of bulk and surface perovskite oxides, and adsorption e… ▽ More Green hydrogen production is crucial for a sustainable future, but current catalysts for the oxygen evolution reaction (OER) suffer from slow kinetics, despite many efforts to produce optimal designs, particularly through the calculation of descriptors for activity. In this study, we develop a dataset of density functional theory calculations of bulk and surface perovskite oxides, and adsorption energies of OER intermediates, which includes compositions up to quaternary and facets up to (555). We demonstrate that per-site properties of perovskite oxides such as Bader charge or band center can be tuned through element substitution and faceting, and develop a machine learning model that accurately predicts these properties directly from the local chemical environment. We leverage these per-site properties to identify promising perovskites with high theoretical OER activity. The identified design principles and promising new materials provide a roadmap for closing the gap between current artificial catalysts and biological enzymes. △ Less

Submitted 31 May, 2023; originally announced May 2023.

A simplified method characterizing magnetic ordering modulated photo-thermoelectric response in noncentrosymmetric semimetal Ca3Ru2O7

Authors: Qiang Chen, Jialin Li, Huanfeng Zhu, Tian Zhang, Wei Tang, Hui Xing, ** Peng, Zhiqiang Mao, Linjun Li

Abstract: Photo-Thermoelectric (PTE) response is usually one of the main working mechanisms for photodetectors. However, as another fast and easier way to measure thermoelectric characteristics of materials, it can also reveal important physics such as electric-phonon coupling, electron-electron correlation, etc. Recently, the spin entropy related to magnetic order transition which contributes to thermoelec… ▽ More Photo-Thermoelectric (PTE) response is usually one of the main working mechanisms for photodetectors. However, as another fast and easier way to measure thermoelectric characteristics of materials, it can also reveal important physics such as electric-phonon coupling, electron-electron correlation, etc. Recently, the spin entropy related to magnetic order transition which contributes to thermoelectric power is attracting more and more attention. Here, we demonstrate the PTE response can be reshaped when Ca3Ru2O7 undergoes meta-magnetic phase (MMP) transition driven by both temperature and magnetic field. Firstly, a sign change is observed crossing TS = 48 K and the linear polarization angle dependent PTE current maximizes along a-axis above TS while maximizes along b-axis below TS, which indicates that the antiferromagnetic spin order contributes to such spatial anisotropy. Secondly, in the temperature range of around 40 ~ 50 K, the PTE current is found to be sharply suppressed when external magnetic field is applied in plane along a-axis but is only gradually suppressed when applied field is along b-axis which gives out two critical fields. We attribute such suppression of PTE current under magnetic field to the suppression of the spin entropy in the phase transition between the antiferromagnetic state and the MMP state and the H-T phase diagrams of Ca3Ru2O7 is redrawn accordingly. Compared to previously work which trying to understand the magnetic phase transition in Ca3Ru2O7, such as neutron scattering, specific heat, and other advanced transport measurements, our work provides a more convenient yet efficient method, which may also find applications in other correlated spin materials in general. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Journal ref: Adv. Photonics Res. 2022, 3, 2200029

Data-Driven, Physics-Informed Descriptors of Cation Ordering in Multicomponent Oxides

Authors: Jiayu Peng, James Damewood, Rafael Gómez-Bombarelli

Abstract: The structural tunability and compositional diversity of multicomponent perovskite oxides have enabled their various applications, including catalysis and electronics. The cation ordering in these oxides, ranging from disordered (i.e., high-entropy) to ordered (e.g., rocksalt), profoundly influences their properties. While computational design tools can typically predict properties associated with… ▽ More The structural tunability and compositional diversity of multicomponent perovskite oxides have enabled their various applications, including catalysis and electronics. The cation ordering in these oxides, ranging from disordered (i.e., high-entropy) to ordered (e.g., rocksalt), profoundly influences their properties. While computational design tools can typically predict properties associated with a particular ordering, inferring which ordering -- if any -- will be observed in synthesized oxides remains challenging. Here, we leveraged first-principles simulations and machine learning to develop data-driven, physics-informed descriptors of experimental ordering in multicomponent perovskites and compared them with traditional physicochemical descriptors, e.g., ionic radii and oxidation states. The fitted low-dimensional classification models correctly rank up to 93% of compositions in an experimental dataset of 190 perovskites between cation-ordered and disordered, offering a rigorous benchmark between theory and experiments. Furthermore, these descriptors accelerate high-throughput virtual screening of multicomponent oxides by predicting their dominant ordering to avoid costly, exhaustive simulations of cation arrangements. △ Less

Submitted 2 May, 2023; originally announced May 2023.

Twisted Heating-Cooling Transition of Near-field Radiation in Drifted Metasurfaces

Authors: Jiebin Peng, Zi Wang, Jie Ren

Abstract: The magic angle twisted bilayer systems give rise to many exotic phenomena in two-dimensional electronic or photonic platforms. Here, we study the twisted near-field energy radiation between graphene metasurfaces with nonequilibrium drifted Dirac electrons. Anomalously, we find unconventional radiative flux that directs heat from cold to hot. This far-from-equilibrium phenomenon leads to a heating… ▽ More The magic angle twisted bilayer systems give rise to many exotic phenomena in two-dimensional electronic or photonic platforms. Here, we study the twisted near-field energy radiation between graphene metasurfaces with nonequilibrium drifted Dirac electrons. Anomalously, we find unconventional radiative flux that directs heat from cold to hot. This far-from-equilibrium phenomenon leads to a heating-cooling transition beyond a thermal magic twist angle, facilitated by twist-induced photonic topological transitions. The underlying mechanism is related to the spectrum match and mismatch caused by the cooperation between the non-reciprocal nature of drifted plasmon polaritons and their topological features. Furthermore, we report the unintuitive distance dependence of radiative energy flux under large twist angles. The near-field radiation becomes thermal insulating when increasing to a critical distance, and subsequently reverses the radiative flux to increase the cooling power as the distance increases further. Our results indicate the promising future of nonequilibrium drifted and twisted devices and pave the way towards tunable radiative thermal management. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Representations of Materials for Machine Learning

Authors: James Damewood, Jessica Karaguesian, Jaclyn R. Lunger, Aik Rui Tan, Mingrou Xie, Jiayu Peng, Rafael Gómez-Bombarelli

Abstract: High-throughput data generation methods and machine learning (ML) algorithms have given rise to a new era of computational materials science by learning relationships among composition, structure, and properties and by exploiting such relations for design. However, to build these connections, materials data must be translated into a numerical form, called a representation, that can be processed by… ▽ More High-throughput data generation methods and machine learning (ML) algorithms have given rise to a new era of computational materials science by learning relationships among composition, structure, and properties and by exploiting such relations for design. However, to build these connections, materials data must be translated into a numerical form, called a representation, that can be processed by a machine learning model. Datasets in materials science vary in format (ranging from images to spectra), size, and fidelity. Predictive models vary in scope and property of interests. Here, we review context-dependent strategies for constructing representations that enable the use of materials as inputs or outputs of machine learning models. Furthermore, we discuss how modern ML techniques can learn representations from data and transfer chemical and physical information between tasks. Finally, we outline high-impact questions that have not been fully resolved and thus, require further investigation. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Comments: 20 pages, 5 figures, To Appear in Annual Review of Materials Research 53

Machine learning phases of an Abelian gauge theory

Authors: Jhao-Hong Peng, Yuan-Heng Tseng, Fu-Jiun Jiang

Abstract: The phase transition of the two-dimensional $U(1)$ quantum link model on the triangular lattice is investigated by employing a supervised neural network (NN) consisting of only one input layer, one hidden layer of two neurons, and one output layer. No information on the studied model is used when the NN training is conducted. Instead, two artificially made configurations are considered as the trai… ▽ More The phase transition of the two-dimensional $U(1)$ quantum link model on the triangular lattice is investigated by employing a supervised neural network (NN) consisting of only one input layer, one hidden layer of two neurons, and one output layer. No information on the studied model is used when the NN training is conducted. Instead, two artificially made configurations are considered as the training set. Interestingly, the obtained NN not only estimates the critical point accurately but also uncovers the physics correctly. The results presented here imply that a supervised NN, which has a very simple architecture and is trained without any input from the investigated model, can identify the targeted phase structure with high precision. △ Less

Submitted 30 December, 2022; originally announced December 2022.

Comments: 7 pages, 12 figures

Journal ref: Prog Theor Exp Phys (2023)

Field-free spin-orbit torque-induced switching of perpendicular magnetization at room temperature in WTe2/ferromagnet heterostructures

Authors: Xiaomiao Yin, Lujun Wei, Pai Liu, Jiajv Yang, Pengchao Zhang, **Cheng Peng, Fei Huang, Ruobai Liu, Jun Du, Yong Pu

Abstract: Spin-orbit torque (SOT) provides an efficient way to achieve charge-to-spin conversion and can switch perpendicular magnetization, which is essential for designing novel energy-efficient spintronic devices. An out-of-plane SOT could directly switch perpendicular magnetization. Encouragingly, field-free perpendicular magnetization switching of a two-dimensional (2D) material WTe2/ferromagnet (FM) b… ▽ More Spin-orbit torque (SOT) provides an efficient way to achieve charge-to-spin conversion and can switch perpendicular magnetization, which is essential for designing novel energy-efficient spintronic devices. An out-of-plane SOT could directly switch perpendicular magnetization. Encouragingly, field-free perpendicular magnetization switching of a two-dimensional (2D) material WTe2/ferromagnet (FM) bilayer has been reported recently, but the working temperature (200 K) is below room temperature. Here, we report the field-free perpendicular magnetization switching carried out at room temperature on a WTe2/Pt/Co/Pt multilayer film. Controlled experiments confirm that the field-free switching is caused by the in-plane antidam** SOT generated in the Pt/Co/Pt multilayer and the out-of-plane generated in the a-axis WTe2 thin film. This work offers a potential method for using spintronic devices made of two-dimensional materials at room temperature. △ Less

Submitted 29 December, 2022; originally announced December 2022.

Unexpected results of the phase transitions of four-state Potts model on the square and the honeycomb lattices

Authors: Jhao-Hong Peng, Fu-Jiun Jiang

Abstract: It is widely believed that the phase transition for the four-state ferromagnetic Potts model on the square lattice is of the pseudo-first order. Specifically, it is expected that first-order phase transition behavior is found on small lattices and that the true nature of second-order phase transition only emerges with large system sizes. It is also intuitively expected that for other geometries, t… ▽ More It is widely believed that the phase transition for the four-state ferromagnetic Potts model on the square lattice is of the pseudo-first order. Specifically, it is expected that first-order phase transition behavior is found on small lattices and that the true nature of second-order phase transition only emerges with large system sizes. It is also intuitively expected that for other geometries, the types of the associated phase transitions should be identical to that of the square lattice. However, after simulating more than 16 million spins for the four-state Pott model, we observe that a feature of first-order phase transition persists on the square lattice. Additionally, a characteristic of second-order phase transition already appears on a small honeycomb lattice. Indications of a pseudo-first-order phase transition were not found in our investigation. This suggests that a thorough analytic calculation may be required to develop a better understanding of the presented results. △ Less

Submitted 23 December, 2022; originally announced December 2022.

Comments: 4 pages, 1 table, 3 figures

Stacking dependent ferroelectricity and antiferroelectricity in quasi-one-dimensional oxyhalides NbO$X_3$

Authors: Wencong Sun, Ning Ding, Jun Chen, Hai-Peng You, ** Peng, Shan-Shan Wang, Shuai Dong

Abstract: Low-dimensional ferroelectricity and polar materials have attracted considerable attentions for their fascinating physics and potential applications. Based on first-principles calculations, here we investigate the stacking modes and polar properties of a typical series of quasi-one-dimensional ferroelectrics: double-chain oxyhalides NbO$X_3$ ($X$=Cl, Br, I). The geometry of their double-chains all… ▽ More Low-dimensional ferroelectricity and polar materials have attracted considerable attentions for their fascinating physics and potential applications. Based on first-principles calculations, here we investigate the stacking modes and polar properties of a typical series of quasi-one-dimensional ferroelectrics: double-chain oxyhalides NbO$X_3$ ($X$=Cl, Br, I). The geometry of their double-chains allows both the interchain/intrachain permutation. Thus, different stacking modes of double-chains lead to a variety of ferroelectric and antiferroelectric phases in both the tetragonal and monoclinic crystals. The proximate energies of these phases may lead to multiphase coexistence in real materials, as well as the hydrostatic pressure driving structural phase transition. Their spontaneous polarizations and piezoelectricity of the ferroelectric phases are prominent, comparable to commercially used ferroelectric BaTiO$_3$ and piezoelectric ZnO, respectively. Our work demonstrates that the van der Waals NbO$X_3$ are promising materials for exploring quasi-one-dimensional ferroelectricity and antiferroelectricity. △ Less

Submitted 7 October, 2022; v1 submitted 26 September, 2022; originally announced September 2022.

Comments: 7 pages, 5 figures

Journal ref: Phys. Rev. Materials 6, 104404 (2022)

Multitask quantum thermal machines and cooperative effects

Authors: **cheng Lu, Zi Wang, Rongqian Wang, Jiebin Peng, Chen Wang, Jian-Hua Jiang

Abstract: Including phonon-assisted inelastic process in thermoelectric devices is able to enhance the performance of nonequilibrium work extraction. In this work, we demonstrate that inelastic phonon-thermoelectric devices have a fertile functionality diagram, where particle current and phononic heat currents are coupled and fueled by chemical potential difference. Such devices can simultaneously perform m… ▽ More Including phonon-assisted inelastic process in thermoelectric devices is able to enhance the performance of nonequilibrium work extraction. In this work, we demonstrate that inelastic phonon-thermoelectric devices have a fertile functionality diagram, where particle current and phononic heat currents are coupled and fueled by chemical potential difference. Such devices can simultaneously perform multiple tasks, e.g., heat engines, refrigerators, and heat pumps. Guided by the entropy production, we mainly study the efficiencies and coefficients of performance of multitask quantum thermal machines, where the roles of the inelastic scattering process and multiple biases in multiterminal setups are emphasized. Specifically, in a three-terminal double-quantum-dot setup with a tunable gate, we show that it efficiently performs two useful tasks due to the phonon-assisted inelastic process. Moreover, the cooperation between the longitudinal and transverse thermoelectric effects in the three-terminal thermoelectric systems leads to markedly improved performance of the thermal machines. While for the four-terminal four-quantum-dot thermoelectric setup, we find that additional thermodynamic affinity furnishes the system with both enriched functionality and enhanced efficiency. Our work provides insights into optimizing phonon-thermoelectric devices. △ Less

Submitted 18 September, 2022; v1 submitted 24 August, 2022; originally announced August 2022.

Comments: 14 pages, 7 figures

Journal ref: Phys. Rev. B 107, 075428 (2023)

Transport in electron-photon systems

Authors: Jian-Sheng Wang, Jiebin Peng, Zu-Quan Zhang, Yong-Mei Zhang, Tao Zhu

Abstract: We review the description and modeling of transport phenomena among the electron systems coupled via scalar or vector photons. It consists of three parts. The first part is about scalar photons, i.e., Coulomb interactions. The second part is with transverse photons described by vector potentials. The third part is on $φ=0$ or temporal gauge, which is a full theory of the electrodynamics. We use th… ▽ More We review the description and modeling of transport phenomena among the electron systems coupled via scalar or vector photons. It consists of three parts. The first part is about scalar photons, i.e., Coulomb interactions. The second part is with transverse photons described by vector potentials. The third part is on $φ=0$ or temporal gauge, which is a full theory of the electrodynamics. We use the nonequilibrium Green's function (NEGF) formalism as a basic tool to study steady-state transport. Although with local equilibrium it is equivalent to the fluctuational electrodynamics (FE), the advantage of NEGF is that it can go beyond FE due to its generality. We have given a few examples in the review, such as transfer of heat between graphene sheets driven by potential bias, emission of light by a double quantum dot, and emission of energy, momentum, and angular momentum from a graphene nanoribbon. All of these calculations are based on a generalization of the Meir-Wingreen formula commonly used in electronic transport in mesoscopic systems, with materials properties represented by photon self-energy, coupled with the Keldysh equation and the solution to the Dyson equation. △ Less

Submitted 6 August, 2022; originally announced August 2022.

Comments: 45 pages, 14 figures

Journal ref: Front. Phys. 18, 43602 (2023)

Evidence of anomalous Curie constants for nonmagnetic impurities in a critical 2-dimensional $JQ_3$ model on the honeycomb lattice

Authors: L. -W. Huang, J-H. Peng, F. -J. Jiang

Abstract: The Curie constants $C^{*} = \lim_{T\rightarrow 0}Tχ_{\text{imp}}$ of a spin-1/2 and a spin-1 impurities are calculated using the quantum Monte Carlo simulations. Here the impurity susceptibility $χ_{\text{imp}}$ is the difference between the uniform susceptibilities with and without the impurity and $T$ is the temperature. Moreover, the two-dimensional quantum $JQ_3$ model on the honeycomb lattic… ▽ More The Curie constants $C^{*} = \lim_{T\rightarrow 0}Tχ_{\text{imp}}$ of a spin-1/2 and a spin-1 impurities are calculated using the quantum Monte Carlo simulations. Here the impurity susceptibility $χ_{\text{imp}}$ is the difference between the uniform susceptibilities with and without the impurity and $T$ is the temperature. Moreover, the two-dimensional quantum $JQ_3$ model on the honeycomb lattice is considered as the host system. $Tχ_{\text{imp}}$ as a function $T$ is investigated in great detail. Remarkably, our data indicate strongly that $C^* > 0.25$ and $C^* > 2/3$ for the spin-1/2 and the spin-1 impurities, respectively. In particular, although no definite conclusion is obtained due to finite-size effects, we find the Curie constant associated with a spin-1/2 impurity likely converges to a value greater than the established result of 0.262(2) in the literature. The outcomes reached here provide certain evidence that fractional impurity spin is observed for the studied $JQ_3$ system. △ Less

Submitted 31 July, 2022; originally announced August 2022.

Comments: 5 pages, 3 figures

Evolution of magnetic phase in two dimensional van der Waals Mn$_{1-x}$Ni$_x$PS$_3$ single crystals

Authors: Ziye Lu, Xinyu Yang, Lin Huang, Xiyu Chen, Meifeng Liu, ** Peng, Shuai Dong, Jun-Ming Liu

Abstract: Metal thio(seleno)phosphates MPX$_3$ have attracted considerable attentions with wide spanned band gaps and rich magnetic properties. In this series, two neighboring members MnPS$_3$ and NiPS$_3$ differ in magnetic atoms, magnetic easy axes, spin anisotropy, as well as nearest-neighbor magnetic interactions. The competition between these components may cause intriguing physical phenomena. In this… ▽ More Metal thio(seleno)phosphates MPX$_3$ have attracted considerable attentions with wide spanned band gaps and rich magnetic properties. In this series, two neighboring members MnPS$_3$ and NiPS$_3$ differ in magnetic atoms, magnetic easy axes, spin anisotropy, as well as nearest-neighbor magnetic interactions. The competition between these components may cause intriguing physical phenomena. In this article, the evolution of magnetism of Mn$_{1-x}$Ni$_x$PS$_3$ series is reported. Despite the incompatible antiferromagnetic orders of two end members, the antiferromagnetism persists as the ground state in the whole substitution region. The magnetic ordering temperature $T_{\rm N}$ show nonmonotonic V-shape behavior, and the reentrant spin glass phase at x=0.5 is observed. In addition, abnormal bifurcation of $T_{\rm N}$ occurs at x=0.75, which may be due to the temperature-dependent spin reorientation or phase separation. The evolution of magnetism is further confirmed semi-quantitatively by our density functional theory calculations. Our study indicates that exotic magnetism can be intrigued when multi-degrees of freedom are involved in these low-dimensional systems, which call for more in-depth microscopic studies in future. △ Less

Submitted 1 July, 2022; originally announced July 2022.

Journal ref: Journal of Physics: Condensed Matter 34, 354005 (2022)

Semiconductor-like photocarrier dynamics in Dirac Semimetal Cd3As2 film Probed with transient Terahertz Spectroscopy

Authors: Wenjie Zhang, Yunkun Yang, Peng Suo, Kaiwen Sun, Jun Peng, Xian Lin, Faxian Xiu, Guohong Ma

Abstract: The topological three-dimensional Dirac semimetal Cd3As2 has drawn great attention for the novel physics and promising applications in optoelectronic devices operating in the infrared and THz regimes. Among the extensive studies in the past decades, one intriguing debate is the underlined mechanism that governing the nonequilibrium carrier dynamics following photoexcitation. In this study, the tem… ▽ More The topological three-dimensional Dirac semimetal Cd3As2 has drawn great attention for the novel physics and promising applications in optoelectronic devices operating in the infrared and THz regimes. Among the extensive studies in the past decades, one intriguing debate is the underlined mechanism that governing the nonequilibrium carrier dynamics following photoexcitation. In this study, the temperature dependent photocarrier dynamics in Cd3As2 film has been investigated with time-resolved terahertz spectroscopy. The experimental results demonstrate that photoexcitation results in abrupt increase in THz photoconductivity, and the subsequent relaxation shows a single exponential relaxation for various temperatures and pump fluences. The relaxation time increase from 4.7 ps at 5 K to 7.5 ps at 220 K, while the lifetime remains almost constant of ~7.5 ps with temperature above 220 K. A Rothwarf-Taylor model was employed to fit the temperature dependent relaxation time, and a narrow energy gap of ~35 meV is obtained, which occurs around the Dirac node. Our THz spectroscopy results demonstrate that the photocarrier relaxation in Cd3As2 shows a semiconductor-like behavior, rather than hot carrier scatterings in graphene and most of metals. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Comments: 15 pages,3 figures

Tuning Topological Transitions in Twisted Thermophotovoltaic Systems

Authors: Rongqian Wang, **cheng Lu, Xiaohu Wu, Jiebin Peng, Jian-Hua Jiang

Abstract: Twisted bilayer two-dimensional electronic systems give rise to many exotic phenomena and unveil a new frontier for the study of quantum materials. In photonics, twisted two-dimensional systems coupled via near-field interactions offer a platform to study localization and lasing. Here, we propose that twisting can be an unprecedented tool to tune the performance of near-field thermophotovoltaic sy… ▽ More Twisted bilayer two-dimensional electronic systems give rise to many exotic phenomena and unveil a new frontier for the study of quantum materials. In photonics, twisted two-dimensional systems coupled via near-field interactions offer a platform to study localization and lasing. Here, we propose that twisting can be an unprecedented tool to tune the performance of near-field thermophotovoltaic systems. Remarkably, through twisting-induced photonic topological transitions, we achieve significant tuning of the thermophotovoltaic energy efficiency and power. The underlying mechanism is related to the change of the photonic iso-frequency contours from elliptical to hyperbolic geometries in a setup where the hexagonal-boron-nitride metasurface serves as the heat source and the indium antimonide $p$-$n$ junction serves as the cell. We find a notably high energy efficiency, nearly 53\% of the Carnot efficiency, can be achieved in our thermophotovoltaic system, while the output power can reach to $1.1\times10^4$~W/m$^2$ without requiring a large temperature difference between the source and the cell. Our results indicate the promising future of twisted near-field thermophotovoltaics and paves the way towards tunable, high-performance thermophotovoltaics and infrared detection. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Twisting the near-field radiative heat switch in hyperbolic antiferromagnets

Authors: Yuanyang Du, Jiebin Peng, Zhong Shi, Jie Ren

Abstract: We study the twisted control of the near-field radiative heat transfer between two hyperbolic antiferromagnetic insulators under external magnetic fields. We show that the near-field heat flux can be affected by both the twist angle $θ$ and the magnitude of the applied magnetic field with different broken symmetries. Irrespective of twist angle, the external magnetic field causes the radiative hea… ▽ More We study the twisted control of the near-field radiative heat transfer between two hyperbolic antiferromagnetic insulators under external magnetic fields. We show that the near-field heat flux can be affected by both the twist angle $θ$ and the magnitude of the applied magnetic field with different broken symmetries. Irrespective of twist angle, the external magnetic field causes the radiative heat flux to change nonmonotonically, and the minimum heat flux can be found with the magnetic fields of about 1.5 T. Such nonmonotonic behavior is due to the fact that the magnetic field can radically change the nature of the magnon polaritons with time reversal symmetry breaking. The field not only affects the topological structure of surface magnon polaritons, but also induces the volume magnon polaritons that progressively dominate the heat transfer as the field increases. We further propose a twist-induced thermal switch device with inversion symmetry breaking, which can severely regulate radiative heat flux through different magnetic fields. Our findings account for a characteristic modulation of radiative heat transfer with implications for applications in dynamic thermal management. △ Less

Submitted 16 May, 2022; originally announced May 2022.

Journal ref: Physical Review Applied 2023

Stability of xenon-sodium compounds at moderately low pressures

Authors: Shaoxiong Wang, Huafeng Dong, Junhao Peng, Minru Wen, Xin Zhang, Fugen Wu, Alexander F. Goncharov, Artem R. Oganov

Abstract: A growing body of theoretical and experimental evidence suggests that inert gases (He, Ne, Ar, Kr, Xe, Rn) become less and less inert under increasing pressure. Here we use the ab initio evolutionary algorithm to predict stable compounds of Xe and Na at pressures below 100 GPa, and find three stable compounds, NaXe, NaXe$_3$ and NaXe$_4$. The NaXe belongs to a well-known cubic CsCl structure type.… ▽ More A growing body of theoretical and experimental evidence suggests that inert gases (He, Ne, Ar, Kr, Xe, Rn) become less and less inert under increasing pressure. Here we use the ab initio evolutionary algorithm to predict stable compounds of Xe and Na at pressures below 100 GPa, and find three stable compounds, NaXe, NaXe$_3$ and NaXe$_4$. The NaXe belongs to a well-known cubic CsCl structure type. The NaXe$_4$'s structure is common in amphiboles, whereas the NaXe$_3$ has a unique structure, analogous to the "post-perovskite" orthorhombic CaIrO$_3$-type structure with Ir atoms removed. This is the first time that a cation-vacant version of the CaIrO$_3$ is found in any compound. NaXe, NaXe$_3$ and NaXe$_4$ are found to be metallic. △ Less

Submitted 11 December, 2023; v1 submitted 13 March, 2022; originally announced March 2022.

μSR investigation of the Fe-doped Ca$_{3}$Ru$_{2}$O$_{7}$ polar metal

Authors: G. Lamura, D. Das, T. Shang, J. Peng, Y. Wang, Z. Q. Mao, T. Shiroka

Abstract: Ca$_{3}$Ru$_{2}$O$_{7}$ is a polar metal that belongs to the class of multiferroic magnetic materials. Here, tiny amounts of Fe do** in the Ru sites bring about dramatic changes in the electronic and magnetic properties and generate a complex H-T phase diagram. To date, not much is known about the ground state of such a system in the absence of magnetic field. By performing muon-spin spectroscop… ▽ More Ca$_{3}$Ru$_{2}$O$_{7}$ is a polar metal that belongs to the class of multiferroic magnetic materials. Here, tiny amounts of Fe do** in the Ru sites bring about dramatic changes in the electronic and magnetic properties and generate a complex H-T phase diagram. To date, not much is known about the ground state of such a system in the absence of magnetic field. By performing muon-spin spectroscopy ($μ$SR) measurements in 5% Fe-doped Ca$_{3}$Ru$_{2}$O$_{7}$ single crystals, we investigate its electronic properties at a local level. Transverse-field $μ$SR results indicate a very sharp normal-to-antiferromagnetic transition at T$_{N}$ = 79.7(1) K, with a width of only 1 K. Zero-field $μ$SR measurements in the magnetically ordered state allow us to determine the local fields B$_{i}$ at the muon implantation sites. By symmetry, muons stop** close to the RuO$_{2}$ planes detect only the weak nuclear dipolar fields, while those stop** next to apical oxygens sense magnetic fields as high as 150 mT. In remarkable agreement with the nominal Fe-do**, a $\sim$ 6% minority of the these muons feel slightly lower fields, reflecting a local magnetic frustration induced by iron ions. Finally, B$_{i}$ shows no significant changes across the metal-to-insulator transition, close to 40 K. We ascribe this surprising lack of sensitivity to the presence of crystal twinning. △ Less

Submitted 18 February, 2022; originally announced February 2022.

Comments: 6 pages, 6 figures

Journal ref: J. Magn. Magn. Mater. 551, 169138 (2022)

Selective Trap** of Hexagonally Warped Topological Surface States in a Triangular Quantum Corral

Authors: Mu Chen, Ye** Jiang, Jun** Peng, Huimin Zhang, Cui-Zu Chang, Xiao Feng, Zhenguo Fu, Fawei Zheng, ** Zhang, Lili Wang, Ke He, Xu-Cun Ma, Qi-Kun Xue

Abstract: The surface of a three-dimensional topological insulator (TI) hosts two-dimensional massless Dirac fermions (DFs), the gapless and spin-helical nature of which yields many exotic phenomena, such as the immunity of topological surface states (TSS) to back-scattering. This leads to their high transmission through surface defects or potential barriers. Quantum corrals, previously elaborated on metal… ▽ More The surface of a three-dimensional topological insulator (TI) hosts two-dimensional massless Dirac fermions (DFs), the gapless and spin-helical nature of which yields many exotic phenomena, such as the immunity of topological surface states (TSS) to back-scattering. This leads to their high transmission through surface defects or potential barriers. Quantum corrals, previously elaborated on metal surfaces, can act as nanometer-sized electronic resonators to trap Schrödinger electrons by quantum confinement. It is thus intriguing, concerning their peculiar nature, to put the Dirac electrons of TSS to the test in similar circumstances. Here, we report the behaviors of TSS in a triangular quantum corral (TQC) fabricated by epitaxially growing Bi bilayer nanostructures on the surfaces of Bi2Te3 films. Unlike a circular corral, the TQC is supposed to be totally transparent for DFs. By map** the electronic structure of TSS inside TQCs through a low-temperature scanning tunneling microscope in the real space, both the trap** and de-trap** behaviors of the TSS electrons are observed. The selection rules are found to be governed by the geometry and spin texture of the constant energy contour of TSS upon the strong hexagonal war** in Bi2Te3. Careful analysis of the quantum interference patterns of quasi-bound states yields the corresponding wave vectors of trapped TSS, through which two trap** mechanisms favoring momenta in different directions are uncovered. Our work indicates the extended nature of TSS and elucidates the selection rules of the trap** of TSS in the presence of a complicated surface state structure, giving insights into the effective engineering of DFs in TIs. △ Less

Submitted 23 January, 2022; originally announced January 2022.

Comments: 31pages, 12figures(including supplementary materials)

Journal ref: Sci. Adv. 5, eaaw398 (2019)

Geometric thermodynamic uncertainty relation in periodically driven thermoelectric heat engine

Authors: **cheng Lu, Zi Wang, Jiebin Peng, Chen Wang, Jian-Hua Jiang, Jie Ren

Abstract: Thermodynamic uncertainty relation, quantifying a trade-off among average current, the associated fluctuation (precision), and entropy production (cost), has been formulated in nonequilibrium steady state and various stochastic systems. Herein, we study the thermodynamic uncertainty relation in generic thermoelectric heat engines under a periodic control protocol, by uncovering the underlying Berr… ▽ More Thermodynamic uncertainty relation, quantifying a trade-off among average current, the associated fluctuation (precision), and entropy production (cost), has been formulated in nonequilibrium steady state and various stochastic systems. Herein, we study the thermodynamic uncertainty relation in generic thermoelectric heat engines under a periodic control protocol, by uncovering the underlying Berry-phase-like contribution. We show that our thermodynamic uncertainty relation breaks the seminal steady-state results, originating from the non-vanishing geometric effect. Furthermore, by deriving the consequent trade-off relation binding efficiency, power, and constancy, we prove that the periodically driven thermoelectric heat engines can generally outperform the steady-state analogies. The general bounds are illustrated by an analytically solvable two-terminal single quantum dot heat engine under the periodic modulation. Our work provides a geometric framework in bounding and optimizing a wide range of periodically driven thermoelectric thermal machines. △ Less

Submitted 7 January, 2022; originally announced January 2022.

Comments: 11 pages, 6 figures

Journal ref: Phys. Rev. B 105, 115428 (2022)

Analog Quantum Approximate Optimization Algorithm

Authors: Nancy Barraza, Gabriel Alvarado Barrios, Jie Peng, Lucas Lamata, Enrique Solano, Francisco Albarrán-Arriagada

Abstract: We present an analog version of the quantum approximate optimization algorithm suitable for current quantum annealers. The central idea of this algorithm is to optimize the schedule function, which defines the adiabatic evolution. It is achieved by choosing a suitable parametrization of the schedule function based on interpolation methods for a fixed time, with the potential to generate any functi… ▽ More We present an analog version of the quantum approximate optimization algorithm suitable for current quantum annealers. The central idea of this algorithm is to optimize the schedule function, which defines the adiabatic evolution. It is achieved by choosing a suitable parametrization of the schedule function based on interpolation methods for a fixed time, with the potential to generate any function. This algorithm provides an approximate result of optimization problems that may be developed during the coherence time of current quantum annealers on their way toward quantum advantage. △ Less

Submitted 8 October, 2022; v1 submitted 14 December, 2021; originally announced December 2021.

Comments: 13 pages, 4 figures

Journal ref: Quantum Sci. Technol. 7 045035 (2022)

Limits to Electrical Mobility in Lead-Halide Perovskite Semiconductors

Authors: Chelsea Q. Xia, Jiali Peng, Samuel Poncé, Jay B. Patel, Adam D. Wright, Timothy W. Crothers, Mathias Uller Rothmann, Juliane Borchert, Rebecca L. Milot, Hans Kraus, Qianqian Lin, Feliciano Giustino, Laura M. Herz, Michael B. Johnston

Abstract: Semiconducting polycrystalline thin films are cheap to produce and can be deposited on flexible substrates, yet high-performance electronic devices usually utilize single-crystal semiconductors, owing to their superior electrical mobilities and longer diffusion lengths. Here we show that the electrical performance of polycrystalline films of metal-halide perovskites (MHPs) approaches that of singl… ▽ More Semiconducting polycrystalline thin films are cheap to produce and can be deposited on flexible substrates, yet high-performance electronic devices usually utilize single-crystal semiconductors, owing to their superior electrical mobilities and longer diffusion lengths. Here we show that the electrical performance of polycrystalline films of metal-halide perovskites (MHPs) approaches that of single crystals at room temperature. Combining temperature-dependent terahertz conductivity measurements and ab initio calculations we uncover a complete picture of the origins of charge scattering in single crystals and polycrystalline films of CH$_3$NH$_3$PbI$_3$. We show that Fröhlich scattering of charge carriers with multiple phonon modes is the dominant mechanism limiting mobility, with grain-boundary scattering further reducing mobility in polycrystalline films. We reconcile the large discrepancy in charge diffusion lengths between single crystals and films by considering photon reabsorption. Thus, polycrystalline films of MHPs offer great promise for devices beyond solar cells, including transistors and modulators. △ Less

Submitted 10 September, 2021; originally announced September 2021.

Comments: 33 pages, 4 figures (including the toc figure)

Journal ref: J. Phys. Chem. Lett. 2021, 12, 3607

Nematic Confined Phases in the $U(1)$ Quantum Link Model on a Triangular Lattice: An Opportunity for Near-Term Quantum Computations of String Dynamics on a Chip

Authors: D. Banerjee, S. Caspar, F. -J. Jiang, J. -H. Peng, U. -J. Wiese

Abstract: The $U(1)$ quantum link model on the triangular lattice has two rotation-symmetry-breaking nematic confined phases. Static external charges are connected by confining strings consisting of individual strands with fractionalized electric flux. The two phases are separated by a weak first order phase transition with an emergent almost exact $SO(2)$ symmetry. We construct a quantum circuit on a chip… ▽ More The $U(1)$ quantum link model on the triangular lattice has two rotation-symmetry-breaking nematic confined phases. Static external charges are connected by confining strings consisting of individual strands with fractionalized electric flux. The two phases are separated by a weak first order phase transition with an emergent almost exact $SO(2)$ symmetry. We construct a quantum circuit on a chip to facilitate near-term quantum computations of the non-trivial string dynamics. △ Less

Submitted 2 July, 2021; originally announced July 2021.

Comments: 5 pages, 5 figures

Abnormal Staebler-Wronski effect of amorphous silicon

Authors: Wenzhu Liu, Jianhua Shi, Li** Zhang, Anjun Han, Shenglei Huang, Xiaodong Li, Jun Peng, Yuhao Yang, Yajun Gao, Jian Yu, Kai Jiang, Xinbo Yang, Zhenfei Li, Junlin Du, Xin Song, Youlin Yu, Zhixin Ma, Yubo Yao, Haichuan Zhang, Lujia Xu, **gxuan Kang, Yi Xie, Hanyuan Liu, Fanying Meng, Frédéric Laquai , et al. (2 additional authors not shown)

Abstract: Great achievements in last five years, such as record-efficient amorphous/crystalline silicon heterojunction (SHJ) solar cells and cutting-edge perovskite/SHJ tandem solar cells, place hydrogenated amorphous silicon (a-Si:H) at the forefront of emerging photovoltaics. Due to the extremely low do** efficiency of trivalent boron (B) in amorphous tetravalent silicon, light harvesting of aforementio… ▽ More Great achievements in last five years, such as record-efficient amorphous/crystalline silicon heterojunction (SHJ) solar cells and cutting-edge perovskite/SHJ tandem solar cells, place hydrogenated amorphous silicon (a-Si:H) at the forefront of emerging photovoltaics. Due to the extremely low do** efficiency of trivalent boron (B) in amorphous tetravalent silicon, light harvesting of aforementioned devices are limited by their fill factors (FF), which is a direct metric of the charge carrier transport. It is challenging but crucial to develop highly conductive doped a-Si:H for minimizing the FF losses. Here we report intensive light soaking can efficiently boost the dark conductance of B-doped a-Si:H "thin" films, which is an abnormal Staebler-Wronski effect. By implementing this abnormal effect to SHJ solar cells, we achieve a certificated power conversion efficiency (PCE) of 25.18% (26.05% on designated area) with FF of 85.42% on a 244.63-cm2 wafer. This PCE is one of the highest reported values for total-area "top/rear" contact silicon solar cells. The FF reaches 98.30 per cent of its Shockley-Queisser limit. △ Less

Submitted 3 June, 2021; originally announced June 2021.

Comments: 34 pages, 4 figures in main context,11 figures in supplementary materials

A universal neural network for learning phases and criticalities

Authors: D. -R. Tan, J. -H. Peng, Y. -H. Tseng, F. -J. Jiang

Abstract: A universal supervised neural network (NN) relevant to compute the associated criticalities of real experiments studying phase transitions is constructed. The validity of the built NN is examined by applying it to calculate the criticalities of several three-dimensional (3D) models on the cubic lattice, including the classical $O(3)$ model, the 5-state ferromagnetic Potts model, and a dimerized qu… ▽ More A universal supervised neural network (NN) relevant to compute the associated criticalities of real experiments studying phase transitions is constructed. The validity of the built NN is examined by applying it to calculate the criticalities of several three-dimensional (3D) models on the cubic lattice, including the classical $O(3)$ model, the 5-state ferromagnetic Potts model, and a dimerized quantum antiferromagnetic Heisenberg model. Particularly, although the considered NN is only trained one time on a one-dimensional (1D) lattice with 120 sites, yet it has successfully determined the related critical points of the studied 3D systems. Moreover, real configurations of states are not used in the testing stage. Instead, the employed configurations for the prediction are constructed on a 1D lattice of 120 sites and are based on the bulk quantities or the microscopic states of the considered models. As a result, our calculations are ultimately efficient in computation and the applications of the built NN is extremely broaden. Considering the fact that the investigated systems vary dramatically from each other, it is amazing that the combination of these two strategies in the training and the testing stages lead to a highly universal supervised neural network for learning phases and criticalities of 3D models. Based on the outcomes presented in this study, it is favorably probable that much simpler but yet elegant machine learning techniques can be constructed for fields of many-body systems other than the critical phenomena. △ Less

Submitted 19 March, 2021; originally announced March 2021.

Comments: 11 pages, 18 figures

Designing heat transfer pathways for advanced thermoregulatory textiles

Authors: X. Lan, Y. Wang, J. Peng, Y. Si, J. Ren, B. Ding, B. Li

Abstract: Thermal comfort of textiles plays an indispensable role in the process of human civilization. Advanced textile for personal thermal management shapes body microclimates by merely regulating heat transfer between the skin and local ambient without wasting excess energy. Therefore, numerous efforts have recently been devoted to the development of advanced thermoregulatory textiles. In this review, w… ▽ More Thermal comfort of textiles plays an indispensable role in the process of human civilization. Advanced textile for personal thermal management shapes body microclimates by merely regulating heat transfer between the skin and local ambient without wasting excess energy. Therefore, numerous efforts have recently been devoted to the development of advanced thermoregulatory textiles. In this review, we provide a unified perspective on those state-of-the-art efforts by emphasizing the design of diverse heat transfer pathways. We focus on engineering certain physical quantities to tailor the heat transfer pathways, such as thermal emittance/absorptance, reflectance and transmittance in near-infrared and mid-infrared radiation, as well as thermal conductance in conduction. Tuning those heat transfer pathways can achieve different functionalities for personal thermal management, such as passive cooling, warming, or even dual-mode (cooling-warming), either static switching or dynamic adapting. Finally, we point out the challenges and opportunities in this emerging field, including but not limited to the impact of evaporation and convection with missing blocks of heat pathways, the bio-inspired and artificial-intelligence-guided design of advanced functional textiles. △ Less

Submitted 4 March, 2021; originally announced March 2021.

Comments: 31 pages, 22 figures, the final published version can be found in https://doi.org/10.1016/j.mtphys.2021.100342

Journal ref: Materials Today Physics 17, 100342 (2021)

Data Analytics Approach to Predict High-Temperature Cyclic Oxidation Kinetics of NiCr-based Alloys

Authors: Jian Peng, Rishi Pillai, Marie Romedenne, Bruce A. Pint, Govindarajan Muralidharan, J. Allen Haynes, Dongwon Shin

Abstract: Although of practical importance, there is no established modeling framework to accurately predict high-temperature cyclic oxidation kinetics of multi-component alloys due to the inherent complexity. We present a data analytics approach to predict the oxidation rate constant of NiCr-based alloys as a function of composition and temperature with a highly consistent and well-curated experimental dat… ▽ More Although of practical importance, there is no established modeling framework to accurately predict high-temperature cyclic oxidation kinetics of multi-component alloys due to the inherent complexity. We present a data analytics approach to predict the oxidation rate constant of NiCr-based alloys as a function of composition and temperature with a highly consistent and well-curated experimental dataset. Two characteristic oxidation models, i.e., a simple parabolic law and a statistical cyclic-oxidation model, have been chosen to numerically represent the high-temperature oxidation kinetics of commercial and model NiCr-based alloys. We have successfully trained machine learning (ML) models using highly ranked key input features identified by correlation analysis to accurately predict experimental parabolic rate constants (kp). This study demonstrates the potential of ML approaches to predict oxidation kinetics of alloys over a wide composition and temperature ranges. This approach can also serve as a basis for introducing more physically meaningful ML input features to predict the comprehensive cyclic oxidation behavior of multi-component high-temperature alloys with proper constraints based on the known underlying mechanisms. △ Less

Submitted 25 February, 2021; originally announced February 2021.

Quantum criticality at finite temperature for two-dimensional $JQ_3$ models on the square and the honeycomb lattices

Authors: J. -H. Peng, D. -R. Tan, L. -W. Huang, F. -J. Jiang

Abstract: We study the quantum criticality at finite temperature for three two-dimensional (2D) $JQ_3$ models using the first principle nonperturbative quantum Monte Carlo calculations (QMC). In particular, the associated universal quantities are obtained and their inverse temperature dependence are investigated. The considered models are known to have quantum phase transitions from the Néel order to the va… ▽ More We study the quantum criticality at finite temperature for three two-dimensional (2D) $JQ_3$ models using the first principle nonperturbative quantum Monte Carlo calculations (QMC). In particular, the associated universal quantities are obtained and their inverse temperature dependence are investigated. The considered models are known to have quantum phase transitions from the Néel order to the valence bond solid. In addition, these transitions are shown to be of second order for two of the studied models, with the remaining one being of first order. Interestingly, we find that the outcomes obtained in our investigation are consistent with the mentioned scenarios regarding the nature of the phase transitions of the three investigated models. Moreover, when the temperature dependence of the studied universal quantities is considered, a substantial difference between the two models possessing second order phase transitions and the remaining model is observed. Remarkably, by using the associated data from both the models that may have continuous transitions, good data collapses are obtained for a number of the considered universal quantities. The findings presented here not only provide numerical evidence to support the results established in the literature regarding the nature of the phase transitions of these $JQ_3$ models, but also can be employed as certain promising criterions to distinguish second order phase transitions from first order ones for the exotic criticalities of the $JQ$-type models. Finally, based on a comparison between the results calculated here and the corresponding theoretical predictions, we conclude that a more detailed analytic calculation is required in order to fully catch the numerical outcomes determined in our investigation. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Comments: 8 pages, 15 figures

Twist-induced Near-field Thermal Switch Using Nonreciprocal Surface Magnon-Polaritons

Authors: Jiebin Peng, Gaomin Tang, Luqin Wang, Rair Macêdo, Hong Chen, Jie Ren

Abstract: We explore that two ferromagnetic insulator slabs host a strong twist-induced near-field radiative heat transfer in the presence of twisted magnetic fields. Using the formalism of fluctuational electrodynamics, we find the existence of large twist-induced thermal switch ratio in large dam** condition and nonmonotonic twist manipulation for heat transfer in small dam** condition, associated wit… ▽ More We explore that two ferromagnetic insulator slabs host a strong twist-induced near-field radiative heat transfer in the presence of twisted magnetic fields. Using the formalism of fluctuational electrodynamics, we find the existence of large twist-induced thermal switch ratio in large dam** condition and nonmonotonic twist manipulation for heat transfer in small dam** condition, associated with the different twist-induced effects of nonreciprocal elliptic surface magnon-polaritons, hyperbolic surface magnon-polaritons, and twist-non-resonant surface magnon-polaritons. Moreover, the near-field radiative heat transfer can be significantly enhanced by the twist-non-resonant surface magnon-polaritons in the ultra-small dam** condition. Such twist-induced effect is applicable for other kinds of anisotropic slabs with timereversal symmetry breaking. Our findings provide a way to twisted and magnetic control in nanoscale thermal management and improve it with twistronics concepts. △ Less

Submitted 29 December, 2020; originally announced December 2020.

Journal ref: ACS Photonics 2021

First encounters on Bethe Lattices and Cayley Trees

Authors: Junhao Peng, Trifce Sandev, Ljupco Kocarev

Abstract: In this work we consider the first encounter problems between a fixed and/or mobile target A and a moving trap B on Bethe Lattices and Cayley trees. The survival probability (SP) of the target A on the both kinds of structures are analyzed analytically and compared. On Bethe Lattices, the results show that the fixed target will still prolong its survival time, whereas, on Cayley trees, there are s… ▽ More In this work we consider the first encounter problems between a fixed and/or mobile target A and a moving trap B on Bethe Lattices and Cayley trees. The survival probability (SP) of the target A on the both kinds of structures are analyzed analytically and compared. On Bethe Lattices, the results show that the fixed target will still prolong its survival time, whereas, on Cayley trees, there are some initial positions where the target should move to prolong its survival time. The mean first encounter time (MFET) for mobile target A is evaluated numerically and compared with the mean first passage time (MFPT) for the fixed target A. Different initial settings are addressed and clear boundaries are obtained. These findings are helpful for optimizing the strategy to prolong the survival time of the target or to speed up the search process on Cayley trees, in relation to the target's movement and the initial position configuration of the two walkers. We also present a new method, which uses a small amount of memory, for simulating random walks on Cayley trees. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 25 pages, 11 figures

Journal ref: Communications in Nonlinear Science and Numerical Simulation, 2021, 105594. Volume 95, April 2021

Ground state energy density, susceptibility, and Wilson ratio of a two-dimensional disordered quantum spin system

Authors: J. -H. Peng, D. -R. Tan, F. -J. Jiang

Abstract: A two-dimensional (2D) spin-1/2 antiferromagnetic Heisenberg model with a specific kind of quenched disorder is investigated, using the first principles nonperturbative quantum Monte Carlo calculations (QMC). The employed disorder distribution has a tunable parameter $p$ which can be considered as a measure of the corresponding randomness. In particular, when $p=0$ the disordered system becomes th… ▽ More A two-dimensional (2D) spin-1/2 antiferromagnetic Heisenberg model with a specific kind of quenched disorder is investigated, using the first principles nonperturbative quantum Monte Carlo calculations (QMC). The employed disorder distribution has a tunable parameter $p$ which can be considered as a measure of the corresponding randomness. In particular, when $p=0$ the disordered system becomes the clean one. Through a large scale QMC, the dynamic critical exponents $z$, the ground state energy densities $E_0$, as well as the Wilson ratios $W$ of various $p$ are determined with high precision. Interestingly, we find that the $p$ dependence of $z$ and $W$ are likely to be complementary to each other. For instance, while the $z$ of $0.4 \le p \le 0.9$ match well among themselves and are statistically different from $z=1$ which corresponds to the clean system, the $W$ for $p < 0.7$ are in reasonable good agreement with that of $p=0$. The technical subtlety of calculating these physical quantities for a disordered system is demonstrated as well. The results presented here are not only interesting from a theoretical perspective, but also can serve as benchmarks for future related studies. △ Less

Submitted 27 August, 2020; originally announced August 2020.

Comments: 8 pages, 15 figures

Journal ref: Phys. Rev. B 102, 214206 (2020)

Direct Visualization of Irreducible Ferrielectricity in Crystals

Authors: Kai Du, Lei Guo, ** Peng, Xing Chen, Zheng-Nan Zhou, Yang Zhang, Ting Zheng, Yan-** Liang, Jun-Peng Lu, Zhen-Hua Ni, Shan-Shan Wang, Gustaaf Van Tendeloo, Ze Zhang, Shuai Dong, He Tian

Abstract: In solids, charge polarity can one-to-one correspond to spin polarity phenomenologically, e.g. ferroelectricity/ferromagnetism, antiferroelectricity/antiferromagnetism, and even dipole-vortex/magnetic-vortex, but ferrielectricity/ferrimagnetism kept telling a disparate story in microscopic level. Since the definition of a charge dipole involves more than one ion, there may be multiple choices for… ▽ More In solids, charge polarity can one-to-one correspond to spin polarity phenomenologically, e.g. ferroelectricity/ferromagnetism, antiferroelectricity/antiferromagnetism, and even dipole-vortex/magnetic-vortex, but ferrielectricity/ferrimagnetism kept telling a disparate story in microscopic level. Since the definition of a charge dipole involves more than one ion, there may be multiple choices for a dipole unit, which makes most ferrielectric orders equivalent to ferroelectric ones, i.e. this ferrielectricity is not necessary to be a real independent branch of polarity. In this work, by using the spherical aberration-corrected scanning transmission electron microscope, we visualize a nontrivial ferrielectric structural evolution in BaFe2Se3, in which the development of two polar sub-lattices is out-of-sync, for which we term it as irreducible ferrielectricity. Such irreducible ferrielectricity leads to a non-monotonic behavior for the temperature-dependent polarization, and even a compensation point in the ordered state. Our finding unambiguously distinguishes ferrielectrics from ferroelectrics in solids. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Comments: 15 figures

Journal ref: NPJ Quantum Materials 5, 49 (2020)

Gate-Tuned Interlayer Coupling in van der Waals Ferromagnet Fe$_3$GeTe$_2$ Nanoflakes

Authors: Guolin Zheng, Wen-Qiang Xie, Sultan Albarakati, Meri Algarni, Cheng Tan, Yihao Wang, **gyang Peng, James Partridge, Lawrence Farrar, Jiabao Yi, Yimin Xiong, Mingliang Tian, Yu-Jun Zhao, Lan Wang

Abstract: The weak interlayer coupling in van der Waals (vdW) magnets has confined their application to two dimensional (2D) spintronic devices. Here, we demonstrate that the interlayer coupling in a vdW magnet Fe$_3$GeTe$_2$ (FGT) can be largely modulated by a protonic gate.With the increase of the protons intercalated among vdW layers,interlayer magnetic coupling increases.Because of the existence of anti… ▽ More The weak interlayer coupling in van der Waals (vdW) magnets has confined their application to two dimensional (2D) spintronic devices. Here, we demonstrate that the interlayer coupling in a vdW magnet Fe$_3$GeTe$_2$ (FGT) can be largely modulated by a protonic gate.With the increase of the protons intercalated among vdW layers,interlayer magnetic coupling increases.Because of the existence of antiferromagnetic layers in FGT nanoflakes, the increasing interlayer magnetic coupling induces exchange bias in protonated FGT nanoflakes. Most strikingly, a rarely seen zero-field cooled (ZFC) exchange bias with very large values (maximally up to 1.2 kOe) has been observed when higher positive voltages (Vg>4.36 V) are applied to the protonic gate, which clearly demonstrates that a strong interlayer coupling is realized by proton intercalation. Such strong interlayer coupling will enable a wider range of applications for vdW magnets. △ Less

Submitted 24 July, 2020; originally announced July 2020.

Comments: Published on 22 July 2020 in Physical Review Letters

Journal ref: Physical Review Letters 125, 047202 (2020)

Alveolar mimics with periodic strain and its effect on the cell layer formation

Authors: Milad Radiom, Yong He, Juan Peng, Armelle Baeza-Squiban, Jean-Franccois Berret, Yong Chen

Abstract: We report on the development of a new model of alveolar air-tissue interface on a chip. The model consists of an array of suspended hexagonal monolayers of gelatin nanofibers supported by microframes and a microfluidic device for the patch integration. The suspended monolayers are deformed to a central displacement of 40-80 um at the air-liquid interface by application of air pressure in the range… ▽ More We report on the development of a new model of alveolar air-tissue interface on a chip. The model consists of an array of suspended hexagonal monolayers of gelatin nanofibers supported by microframes and a microfluidic device for the patch integration. The suspended monolayers are deformed to a central displacement of 40-80 um at the air-liquid interface by application of air pressure in the range of 200-1000 Pa. With respect to the diameter of the monolayers that is 500 um, this displacement corresponds to a linear strain of 2-10% in agreement with the physiological strain range in the lung alveoli. The culture of A549 cells on the monolayers for an incubation time 1-3 days showed viability in the model. We exerted a periodic strain of 5% at a frequency of 0.2 Hz during 1 hour to the cells. We found that the cells were strongly coupled to the nanofibers, but the strain reduced the coupling and induced remodeling of the actin cytoskeleton, which led to a better tissue formation. Our model can serve as a versatile tool in lung investigations such as in inhalation toxicology and therapy. △ Less

Submitted 15 June, 2020; originally announced June 2020.

Comments: 24 pages, 8 figures

Journal ref: Biotechnology and Bioengineering 117(9), 2827-2841 (2020)

Coupling Physics in Machine Learning to Predict Properties of High-temperatures Alloys

Authors: Jian Peng, Yukinori Yamamoto, Jeffrey A. Hawk, Edgar Lara-Curzio, Dongwon Shin

Abstract: High-temperature alloy design requires a concurrent consideration of multiple mechanisms at different length scales. We propose a workflow that couples highly relevant physics into machine learning (ML) to predict properties of complex high-temperature alloys with an example of the 9-12 wt.% Cr steels yield strength. We have incorporated synthetic alloy features that capture microstructure and pha… ▽ More High-temperature alloy design requires a concurrent consideration of multiple mechanisms at different length scales. We propose a workflow that couples highly relevant physics into machine learning (ML) to predict properties of complex high-temperature alloys with an example of the 9-12 wt.% Cr steels yield strength. We have incorporated synthetic alloy features that capture microstructure and phase transformations into the dataset. Identified high impact features that affect yield strength of 9Cr from correlation analysis agree well with the generally accepted strengthening mechanism. As part of the verification process, the consistency of sub-datasets has been extensively evaluated with respect to temperature and then refined for the boundary conditions of trained ML models. The predicted yield strength of 9Cr steels using the ML models is in excellent agreement with experiments. The current approach introduces physically meaningful constraints in interrogating the trained ML models to predict properties of hypothetical alloys when applied to data-driven materials. △ Less

Submitted 3 September, 2020; v1 submitted 11 April, 2020; originally announced April 2020.

Solute-Vacancy Clustering in Aluminum

Authors: Jian Peng, Sumit Bahl, Amit Shyam, J. Allen Haynes, Dongwon Shin

Abstract: We present an extensive first-principles database of solute-vacancy, homoatomic, heteroatomic solute-solute, and solute-solute-vacancy binding energies of relevant alloying elements in aluminum. We particularly focus on the systems with major alloying elements in aluminum, i.e., Cu, Mg, and Si. We consider physical factors such as solute size and formation energies of intermetallic compounds to co… ▽ More We present an extensive first-principles database of solute-vacancy, homoatomic, heteroatomic solute-solute, and solute-solute-vacancy binding energies of relevant alloying elements in aluminum. We particularly focus on the systems with major alloying elements in aluminum, i.e., Cu, Mg, and Si. We consider physical factors such as solute size and formation energies of intermetallic compounds to correlate with binding energies. Systematic studies of the homoatomic solute-solute-vacancy and heteroatomic (Cu, Mg, or Si)-solute-vacancy complexes reveal the overarching effect of the vacancy in stabilizing solute-solute pairs. The computed binding energies of the solute-solute-vacancy triplet successfully explain several experimental observations that remained unexplained by the reported pair binding energies in literature. The binding energy database presented here elucidates the interaction between solute cluster and vacancy in aluminum, and it is expected to provide insight into the design of advanced Al alloys with tailored properties. △ Less

Submitted 14 July, 2020; v1 submitted 4 April, 2020; originally announced April 2020.

Emergence of Competing Stripe Phase near the Mott Transition in Ti-doped Bilayer Calcium Ruthenates

Authors: Ashish Gangshettiwar, Yanglin Zhu, Zhanzhi Jiang, ** Peng, Yu Wang, Jiaming He, Jianshi Zhou, Zhiqiang Mao, Keji Lai

Abstract: We report the nanoscale imaging of Ti-doped bilayer calcium ruthenates during the Mott metal-insulator transition by microwave impedance microscopy. Different from a typical first-order phase transition where coexistence of the two terminal phases takes place, a new metallic stripe phase oriented along the in-plane crystalline axes emerges inside both the G-type antiferromagnetic insulating state… ▽ More We report the nanoscale imaging of Ti-doped bilayer calcium ruthenates during the Mott metal-insulator transition by microwave impedance microscopy. Different from a typical first-order phase transition where coexistence of the two terminal phases takes place, a new metallic stripe phase oriented along the in-plane crystalline axes emerges inside both the G-type antiferromagnetic insulating state and paramagnetic metallic state. The effect of this electronic state can be observed in macroscopic measurements, allowing us to construct a phase diagram that takes into account the energetically competing phases. Our work provides a model approach to correlate the macroscopic properties and mesoscopic phase separation in complex oxide materials. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Comments: 19 pages, 4 main figures, 6 Supplementary figures

Journal ref: Phys. Rev. B 101, 201106 (2020)

Validity of Harris criterion for two-dimensional quantum spin systems with quenched disorder

Authors: Jhao-Hong Peng, L. -W. Huang, D. -R. Tan, F. -J. Jiang

Abstract: Inspired by the recent results regarding whether the Harris criterion is valid for quantum spin systems, we have simulated a two-dimensional spin-1/2 Heisenberg model on the square lattice with a specific kind of quenched disorder using the quantum Monte Carlo (QMC) calculations. In particular, the considered quenched disorder has a tunable parameter $0\le p \le 1$ which can be considered as a mea… ▽ More Inspired by the recent results regarding whether the Harris criterion is valid for quantum spin systems, we have simulated a two-dimensional spin-1/2 Heisenberg model on the square lattice with a specific kind of quenched disorder using the quantum Monte Carlo (QMC) calculations. In particular, the considered quenched disorder has a tunable parameter $0\le p \le 1$ which can be considered as a measure of randomness. Interestingly, when the magnitude of $p$ increases from 0 to 0.9, at the associated quantum phase transitions the numerical value of the correlation length exponent $ν$ grows from a number compatible with the $O(3)$ result 0.7112(5) to a number slightly greater than 1. In other words, by varying $p$, $ν$ can reach an outcome between 0.7112(5) and 1 (or greater). Furthermore, among the studied values of $p$, all the associated $ν$ violate the Harris criterion except the one corresponding to $p=0.9$. Considering the form of the employed disorder here, the above described scenario should remain true for other randomness if it is based on the similar idea as the one used in this study. This is indeed confirmed by our preliminary results stemming from investigating another disorder distribution. △ Less

Submitted 28 October, 2019; originally announced October 2019.

Comments: 8 pages, 8 figures, 7 tables

Journal ref: Phys. Rev. B 101, 174404 (2020)

Bound state and non-Markovian dynamics of a quantum emitter around a surface plasmonic nanostructure

Authors: Sha-Sha Wen, Yong-Gang Huang, Xiao-Yun Wang, Jie Liu, Yun Li, Ke Deng, Xiu-E Quan, Hong Yang, **-Zhang Peng, He-** Zhao

Abstract: A bound state between a quantum emitter (QE) and surface plasmon polaritons (SPPs) can be formed, where the QE is partially stabilized in its excited state. We put forward a general approach for calculating the energy level shift at a negative frequency $ω$, which is just the negative of the nonresonant part for the energy level shift at positive frequency $-ω$. We also propose an efficient formal… ▽ More A bound state between a quantum emitter (QE) and surface plasmon polaritons (SPPs) can be formed, where the QE is partially stabilized in its excited state. We put forward a general approach for calculating the energy level shift at a negative frequency $ω$, which is just the negative of the nonresonant part for the energy level shift at positive frequency $-ω$. We also propose an efficient formalism for obtaining the long-time value of the excited-state population without calculating the eigenfrequency of the bound state or performing a time evolution of the system, in which the probability amplitude for the excited state in the steady limit is equal to one minus the integral of the evolution spectrum over the positive frequency range. With the above two quantities obtained, we show that the non-Markovian decay dynamics in the presence of a bound state can be obtained by the method based on the Green's function expression for the evolution operator. A general criterion for identifying the existence of a bound state is presented. These are numerically demonstrated for a QE located around a nanosphere and in a gap plasmonic nanocavity. These findings are instructive in the fields of coherent light-matter interactions. △ Less

Submitted 8 August, 2019; originally announced August 2019.

Nonlocality amplifies echoes

Authors: Luca Buoninfante, Anupam Mazumdar, Jun Peng

Abstract: In this paper we will provide smoking-gun signatures of nonlocal interactions while studying reflection and transmission of waves bouncing through two Dirac delta potentials. In particular, we will show that the transmission of waves is less damped compared to the local case, due to the fact that nonlocality weakens the interaction. As a consequence the echoes are amplified. These signatures can b… ▽ More In this paper we will provide smoking-gun signatures of nonlocal interactions while studying reflection and transmission of waves bouncing through two Dirac delta potentials. In particular, we will show that the transmission of waves is less damped compared to the local case, due to the fact that nonlocality weakens the interaction. As a consequence the echoes are amplified. These signatures can be potentially detectable in the context of gravitational waves, where two Dirac delta potentials can mimic the two potential barriers at the surface and at the photon sphere of an ultra compact object, or, at the two photon spheres of a wormhole, experiencing nonlocal interactions. △ Less

Submitted 9 June, 2019; originally announced June 2019.

Comments: 4 pages + 3 figures

Journal ref: Phys. Rev. D 100, 104059 (2019)

Exact calculations of first-passage properties on the pseudofractal scale-free web

Authors: Junhao Peng, Elena Agliari, Zhongzhi Zhang

Abstract: In this paper, we consider discrete time random walks on the pseudofractal scale-free web (PSFW) and we study analytically the related first passage properties. First, we classify the nodes of the PSFW into different levels and propose a method to derive the generation function of the first passage probability from an arbitrary starting node to the absorbing domain, which is located at one or more… ▽ More In this paper, we consider discrete time random walks on the pseudofractal scale-free web (PSFW) and we study analytically the related first passage properties. First, we classify the nodes of the PSFW into different levels and propose a method to derive the generation function of the first passage probability from an arbitrary starting node to the absorbing domain, which is located at one or more nodes of low-level (i.e., nodes with large degree). Then, we calculate exactly the first passage probability, the survival probability, the mean and the variance of first passage time by using the generating functions as a tool. Finally, for some illustrative examples corresponding to given choices of starting node and absorbing domain, we derive exact and explicit results for such first passage properties. The method we propose can as well address the cases where the absorbing domain is located at one or more nodes of high-level on the PSFW, and it can also be used to calculate the first passage properties on other networks with self-similar structure, such as $(u, v)$ flowers and recursive scale-free trees. △ Less

Submitted 12 March, 2019; originally announced March 2019.

Comments: 12 pages, 4 figures

Report number: Roma01.Math

Journal ref: Chaos 25, 073118 (2015)

Scaling laws for diffusion on (trans)fractal scale-free networks

Authors: Junhao Peng, Elena Agliari

Abstract: Fractal (or transfractal) features are common in real-life networks and are known to influence the dynamic processes taking place in the network itself. Here we consider a class of scale-free deterministic networks, called $(u,v)$-flowers, whose topological properties can be controlled by tuning the parameters $u$ and $v$; in particular, for $u>1$, they are fractals endowed with a fractal dimensio… ▽ More Fractal (or transfractal) features are common in real-life networks and are known to influence the dynamic processes taking place in the network itself. Here we consider a class of scale-free deterministic networks, called $(u,v)$-flowers, whose topological properties can be controlled by tuning the parameters $u$ and $v$; in particular, for $u>1$, they are fractals endowed with a fractal dimension $d_f$, while for $u=1$, they are transfractal endowed with a transfractal dimension $\tilde{d}_f$. In this work we investigate dynamic processes (i.e., random walks) and topological properties (i.e., the Laplacian spectrum) and we show that, under proper conditions, the same scalings (ruled by the related dimensions), emerge for both fractal and transfractal. △ Less

Submitted 8 March, 2019; originally announced March 2019.

Comments: 15 pages, 7 figures

Report number: Roma01.Math

Journal ref: Chaos 27, 083108 (2017)

Exact results for the first-passage properties in a class of fractal networks

Authors: Junhao Peng, Elena Agliari

Abstract: In this work we consider a class of recursively-grown fractal networks $G_n(t)$, whose topology is controlled by two integer parameters $t$ and $n$. We first analyse the structural properties of $G_n(t)$ (including fractal dimension, modularity and clustering coefficient) and then we move to its transport properties. The latter are studied in terms of first-passage quantities (including the mean t… ▽ More In this work we consider a class of recursively-grown fractal networks $G_n(t)$, whose topology is controlled by two integer parameters $t$ and $n$. We first analyse the structural properties of $G_n(t)$ (including fractal dimension, modularity and clustering coefficient) and then we move to its transport properties. The latter are studied in terms of first-passage quantities (including the mean trap** time, the global mean first-passage time and the Kemeny's constant) and we highlight that their asymptotic behavior is controlled by network's size and diameter. Remarkably, if we tune $n$ (or, analogously, $t$) while kee** the network size fixed, as $n$ increases ($t$ decreases) the network gets more and more clustered and modular, while its diameter is reduced, implying, ultimately, a better transport performance. The connection between this class of networks and models for polymer architectures is also discussed. △ Less

Submitted 8 March, 2019; originally announced March 2019.

Comments: 14 pages, 4 figures

Report number: Roma01.Math

Journal ref: Chaos 29, 023105 (2019)

Three-terminal normal-superconductor junction as thermal transistor

Authors: Gaomin Tang, Jiebin Peng, Jian-Sheng Wang

Abstract: We propose a thermal transistor based on a three-terminal normal-superconductor (NS) junction with superconductor terminal acting as the base. The emergence of heat amplification is due to the negative differential thermal conductance (NDTC) effect for the NS diode in which the normal side maintains a higher temperature. The temperature dependent superconducting energy gap is responsible for the N… ▽ More We propose a thermal transistor based on a three-terminal normal-superconductor (NS) junction with superconductor terminal acting as the base. The emergence of heat amplification is due to the negative differential thermal conductance (NDTC) effect for the NS diode in which the normal side maintains a higher temperature. The temperature dependent superconducting energy gap is responsible for the NDTC. By controlling quantum dot levels and their coupling strengths to the terminals, a huge heat amplification factor can be achieved. The setup offers an alternative tuning scheme of heat amplification factor and may find use in cryogenic applications. △ Less

Submitted 31 December, 2018; v1 submitted 21 August, 2018; originally announced August 2018.

Comments: 6 pages, 3 figures

Journal ref: Eur. Phys. J. B 92,27 (2019)