-
Infrared thermochromic antenna composite for self-adaptive thermoregulation
Authors:
Francisco V. Ramirez-Cuevas,
Kargal L. Gurunatha,
Lingxi Li,
Usama Zulfiqar,
Sanjayan Sathasivam,
Manish K. Tiwari,
Ivan P. Parkin,
Ioannis Papakonstantinou
Abstract:
Self-adaptive thermoregulation, the mechanism living organisms use to balance their temperature, holds great promise for decarbonizing cooling and heating processes. The functionality can be effectively emulated by engineering the thermal emissivity of materials to adapt to background temperature variations. Yet, solutions that marry large emissivity switching ($Δε$) with scalability, cost-effecti…
▽ More
Self-adaptive thermoregulation, the mechanism living organisms use to balance their temperature, holds great promise for decarbonizing cooling and heating processes. The functionality can be effectively emulated by engineering the thermal emissivity of materials to adapt to background temperature variations. Yet, solutions that marry large emissivity switching ($Δε$) with scalability, cost-effectiveness and design freedom are still lacking. Here, we fill this gap by introducing infrared dipole antennas made of tunable thermochromic materials. We demonstrate that non-spherical antennas (rods, stars and flakes) made of vanadium-dioxide can exhibit a massive (~200-fold) increase in their absorption cross-section as temperature rises. Embedding these antennas in polymer films, or simply spraying them directly, creates free-form thermoregulation composites, featuring an outstanding $Δε\sim0.6$ in spectral ranges that can be tuned at will. Our research paves the way for versatile self-adaptive heat management solutions (coatings, fibers, membranes and films) that could find application in radiative-cooling, heat-sensing, thermal-camouflage, and other.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Robust Protection of III-V Nanowires in Water Splitting by a Thin Compact TiO$_2$ Layer
Authors:
Fan Cui,
Yunyan Zhang,
H. Aruni Fonseka,
Premrudee Promdet,
Ali Imran Channa,
Mingqing Wang,
Xueming Xia,
Sanjayan Sathasivam,
Hezhuang Liu,
Ivan P. Parkin,
Hui Yang,
Ting Li,
Kwang-Leong Choy,
Jiang Wu,
Chris Blackman,
Ana M. Sanchez,
Huiyun Liu
Abstract:
Narrow-bandgap III-V semiconductor nanowires (NWs) with a suitable band structure and strong light-trap** ability are ideal for high-efficiency low-cost solar water-splitting systems. However, due to their nanoscale dimension, they suffer more severe corrosion by the electrolyte solution than the thin-film counterparts. Thus, short-term durability is the major obstacle for using these NWs for pr…
▽ More
Narrow-bandgap III-V semiconductor nanowires (NWs) with a suitable band structure and strong light-trap** ability are ideal for high-efficiency low-cost solar water-splitting systems. However, due to their nanoscale dimension, they suffer more severe corrosion by the electrolyte solution than the thin-film counterparts. Thus, short-term durability is the major obstacle for using these NWs for practical water splitting applications. Here, we demonstrated for the first time that a thin layer (~7 nm thick) of compact TiO$_2$ deposited by atomic layer deposition can provide robust protection to III-V NWs. The protected GaAs NWs maintain 91.4% of its photoluminescence intensity after 14 months of storage in ambient atmosphere, which suggests the TiO$_2$ layer is pinhole-free. Working as a photocathode for water splitting, they exhibited a 45% larger photocurrent density compared with un-protected counterparts and a high Faraday efficiency of 91%, and can also maintain a record-long highly-stable performance among narrow-bandgap III-V NW photoelectrodes; after 67 hours photoelectrochemical stability test reaction in strong acid electrolyte solution (pH = 1), they show no apparent indication of corrosion, which is in stark contrast to the un-protected NWs that are fully failed after 35-hours. These findings provide an effective way to enhance both stability and performance of III-V NW based photoelectrodes, which are highly important for practical applications in solar-energy-based water splitting systems.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Assessment of GaPSb/Si tandem material association properties for photoelectrochemical cells
Authors:
Lipin Chen,
Mahdi Alqahtani,
Christophe Levallois,
Antoine Létoublon,
Julie Stervinou,
Rozenn Piron,
Soline Boyer-Richard,
Jean-Marc Jancu,
Tony Rohel,
Rozenn Bernard,
Yoan Léger,
Nicolas Bertru,
Jiang Wu,
Ivan P. Parkin,
Charles Cornet
Abstract:
Here, the structural, electronic and optical properties of the GaP1-xSbx/Si tandem materials association are determined in view of its use for solar water splitting applications. The GaPSb crystalline layer is grown on Si by Molecular Beam Epitaxy with different Sb contents. The bandgap value and bandgap type of GaPSb alloy are determined on the whole Sb range, by combining experimental absorption…
▽ More
Here, the structural, electronic and optical properties of the GaP1-xSbx/Si tandem materials association are determined in view of its use for solar water splitting applications. The GaPSb crystalline layer is grown on Si by Molecular Beam Epitaxy with different Sb contents. The bandgap value and bandgap type of GaPSb alloy are determined on the whole Sb range, by combining experimental absorption measurements with tight binding (TB) theoretical calculations. The indirect (X-band) to direct (Γ-band) cross-over is found to occur at 30% Sb content. Especially, at a Sb content of 32%, the GaP1-xSbx alloy reaches the desired 1.7eV direct bandgap, enabling efficient sunlight absorption, that can be ideally combined with the Si 1.1 eV bandgap. Moreover, the band alignment of GaP1-xSbx alloys and Si with respect to water redox potential levels has been analyzed, which shows the GaPSb/Si association is an interesting combination both for the hydrogen evolution and oxygen evolution reactions. These results open new routes for the development of III-V/Si low-cost high-efficiency photoelectrochemical cells.
△ Less
Submitted 7 February, 2020;
originally announced February 2020.
-
Contactless Manipulation of Binary Droplets via Sensing of Localized Vapor Sources
Authors:
Robert Malinowski,
Ivan P. Parkin,
Giorgio Volpe
Abstract:
Droplet motion on surfaces influences phenomena as diverse as microfluidic liquid handling, printing technology and micro-organism migration. Typically, droplet motion is achieved by inducing energy gradients on a substrate or flow on the droplet's free surface. Current configurations for droplet manipulation have, however, limited applicability as they rely on carefully tailored wettability gradi…
▽ More
Droplet motion on surfaces influences phenomena as diverse as microfluidic liquid handling, printing technology and micro-organism migration. Typically, droplet motion is achieved by inducing energy gradients on a substrate or flow on the droplet's free surface. Current configurations for droplet manipulation have, however, limited applicability as they rely on carefully tailored wettability gradients and/or bespoke substrates. Here we demonstrate the contactless long-range manipulation of binary droplets on pristine substrates due to the sensing of localized water vapor sources. We show with analytical considerations that the dissipative nature of the driving forces at play, induced by tiny asymmetries in surface tension gradients, is essential to capture the droplet's manipulation mechanism. We then demonstrate its versatility by printing, aligning and reacting materials controllably in space and time.
△ Less
Submitted 21 July, 2020; v1 submitted 11 September, 2019;
originally announced September 2019.
-
Dynamic Control of Particle Deposition in Evaporating Droplets by an External Point Source of Vapor
Authors:
Robert Malinowski,
Giovanni Volpe,
Ivan P. Parkin,
Giorgio Volpe
Abstract:
The deposition of particles on a surface by an evaporating sessile droplet is important for phenomena as diverse as printing, thin-film deposition and self-assembly. The shape of the final deposit depends on the flows within the droplet during evaporation. These flows are typically determined at the onset of the process by the intrinsic physical, chemical and geometrical properties of the droplet…
▽ More
The deposition of particles on a surface by an evaporating sessile droplet is important for phenomena as diverse as printing, thin-film deposition and self-assembly. The shape of the final deposit depends on the flows within the droplet during evaporation. These flows are typically determined at the onset of the process by the intrinsic physical, chemical and geometrical properties of the droplet and its environment. Here, we demonstrate deterministic emergence and real-time control of Marangoni flows within the evaporating droplet by an external point-source of vapor. By varying the source location, we can modulate these flows in space and time to pattern colloids on surfaces in a controllable manner.
△ Less
Submitted 24 January, 2018;
originally announced January 2018.
