-
Giant Hall Switching by Surface-State-Mediated Spin-Orbit Torque in a Hard Ferromagnetic Topological Insulator
Authors:
Lixuan Tai,
Haoran He,
Su Kong Chong,
Huairuo Zhang,
Hanshen Huang,
Gang Qiu,
Yaochen Li,
Hung-Yu Yang,
Ting-Hsun Yang,
Xiang Dong,
Yuxing Ren,
Bingqian Dai,
Tao Qu,
Qingyuan Shu,
Quanjun Pan,
Peng Zhang,
Fei Xue,
Jie Li,
Albert V. Davydov,
Kang L. Wang
Abstract:
Topological insulators (TI) and magnetic topological insulators (MTI) can apply highly efficient spin-orbit torque (SOT) and manipulate the magnetization with their unique topological surface states with ultra-high efficiency. Here, we demonstrate efficient SOT switching of a hard MTI, V-doped (Bi,Sb)2Te3 (VBST) with a large coercive field that can prevent the influence of an external magnetic fie…
▽ More
Topological insulators (TI) and magnetic topological insulators (MTI) can apply highly efficient spin-orbit torque (SOT) and manipulate the magnetization with their unique topological surface states with ultra-high efficiency. Here, we demonstrate efficient SOT switching of a hard MTI, V-doped (Bi,Sb)2Te3 (VBST) with a large coercive field that can prevent the influence of an external magnetic field. A giant switched anomalous Hall resistance of 9.2 $kΩ$ is realized, among the largest of all SOT systems. The SOT switching current density can be reduced to $2.8\times10^5 A/cm^2$. Moreover, as the Fermi level is moved away from the Dirac point by both gate and composition tuning, VBST exhibits a transition from edge-state-mediated to surface-state-mediated transport, thus enhancing the SOT effective field to $1.56\pm 0.12 T/ (10^6 A/cm^2)$ and the interfacial charge-to-spin conversion efficiency to $3.9\pm 0.3 nm^{-1}$. The findings establish VBST as an extraordinary candidate for energy-efficient magnetic memory devices.
△ Less
Submitted 12 May, 2024; v1 submitted 8 June, 2023;
originally announced June 2023.
-
Holographic Entanglement Entropy and Complexity for D-Wave Superconductors
Authors:
Yuanceng Xu,
Yu Shi,
Dong Wang,
Qiyuan Pan
Abstract:
By using the RT formula and the subregion CV conjecture respectively, we numerically investigate the holographic entanglement entropy (HEE) and holographic subregion complexity (HSC) for two holographic d-wave superconducting models with backreactions. We find that both the HEE and HSC can be used as good probes to these two d-wave superconducting phase transitions. The HEE of superconducting phas…
▽ More
By using the RT formula and the subregion CV conjecture respectively, we numerically investigate the holographic entanglement entropy (HEE) and holographic subregion complexity (HSC) for two holographic d-wave superconducting models with backreactions. We find that both the HEE and HSC can be used as good probes to these two d-wave superconducting phase transitions. The HEE of superconducting phase is always lower than that of the normal phase due to the condensation of degrees of freedom below the critical temperature Tc. However, for the HSC, it behaves differently and interestingly, which depends on both the strip-width Lx and backreaction \k{appa}.
△ Less
Submitted 8 March, 2023; v1 submitted 26 September, 2022;
originally announced September 2022.
-
Disorder-robust high-field superconducting phase of FeSe single crystals
Authors:
Nan Zhou,
Yue Sun,
C. Y. Xi,
Z. S. Wang,
J. L. Zhang,
Y. Zhang,
Y. F. Zhang,
C. Q. Xu,
Y. Q. Pan,
J. J. Feng,
Y. Meng,
X. L. Yi,
L. Pi,
T. Tamegai,
Xiangzhuo Xing,
Zhixiang Shi
Abstract:
When exposed to high magnetic fields, certain materials manifest an exotic superconducting (SC) phase that has attracted considerable attention. A proposed explanation for the origin of the high-field SC phase is the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state. This state is characterized by inhomogeneous superconductivity, where the Cooper pairs have finite center-of-mass momenta. Recently, the…
▽ More
When exposed to high magnetic fields, certain materials manifest an exotic superconducting (SC) phase that has attracted considerable attention. A proposed explanation for the origin of the high-field SC phase is the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state. This state is characterized by inhomogeneous superconductivity, where the Cooper pairs have finite center-of-mass momenta. Recently, the high-field SC phase was observed in FeSe, and it was deemed to originate from the FFLO state. Here, we synthesize FeSe single crystals with different levels of disorder. The level of disorder is expressed by the ratio of the mean free path to the coherence length and ranges between 35 and 1.2. The upper critical field \textit{B}$_{\rm{c}2}$ was obtained by both resistivity and magnetic torque measurements over a wide range of temperatures, which went as low as $\sim$0.5 K, and magnetic fields, which went up to $\sim$38 T along the \textit{c} axis and in the \textit{ab} plane. In the high-field region parallel to the \textit{ab} plane, an unusual SC phase was confirmed in all the crystals, and the phase was found to be robust against disorder. This result suggests that the high-field SC phase in FeSe is not a conventional FFLO state.
△ Less
Submitted 19 November, 2021; v1 submitted 3 February, 2021;
originally announced February 2021.
-
Picosecond spin-orbit torque switching of ferrimagnets
Authors:
Hao Wu,
Deniz Turan,
Quanjun Pan,
Guanjie Wu,
Seyed Armin Razavi,
Nezih Tolga Yardimci,
Zongzhi Zhang,
Mona Jarrahi,
Kang L. Wang
Abstract:
Spintronics provides an efficient platform for realizing non-volatile memory and logic devices. In these systems, data is stored in the magnetization of magnetic materials, and magnetization is switched in the writing process. In conventional spintronic devices, ferromagnetic materials are used which have a magnetization dynamics timescale of around the nanoseconds, setting a limit for the switchi…
▽ More
Spintronics provides an efficient platform for realizing non-volatile memory and logic devices. In these systems, data is stored in the magnetization of magnetic materials, and magnetization is switched in the writing process. In conventional spintronic devices, ferromagnetic materials are used which have a magnetization dynamics timescale of around the nanoseconds, setting a limit for the switching speed. Increasing the magnetization switching speed has been one of the challenges in spintronic research. In this work we take advantage of the ultrafast magnetization dynamics in ferrimagnetic materials instead of ferromagnets, and we use femtosecond laser pulses and a photoconductive Auston switch to create picosecond current pulses for switching the ferrimagnet. By anomalous Hall and magneto-optic Kerr (MOKE) measurement, we demonstrate the robust picosecond SOT driven magnetization switching of ferrimagnetic GdFeCo. The time-resolved MOKE shows more than 50 GHz magnetic resonance frequency of GdFeCo, indicating faster than 20 ps spin dynamics and tens of picosecond SOT switching speed. Our work provides a promising route to realize picosecond operation speed for non-volatile magnetic memory and logic applications.
△ Less
Submitted 20 December, 2019;
originally announced December 2019.
-
An efficient and reliable growth method for epitaxial complex oxide films by molecular beam epitaxy
Authors:
T. W. Zhang,
Z. W. Mao,
Z. B. Gu,
Y. F. Nie,
X. Q. Pan
Abstract:
Transition metal oxide heterostructures and interfaces host a variety of exciting quantum phases and can be grown with atomic-scale precision by utilising the intensity oscillations of $in$ $situ$ reflection high-energy electron diffraction (RHEED). However, establishing a stable oscillation pattern in the growth calibration of complex oxides films is very challenging and time consuming. Here, we…
▽ More
Transition metal oxide heterostructures and interfaces host a variety of exciting quantum phases and can be grown with atomic-scale precision by utilising the intensity oscillations of $in$ $situ$ reflection high-energy electron diffraction (RHEED). However, establishing a stable oscillation pattern in the growth calibration of complex oxides films is very challenging and time consuming. Here, we develop a substantially more efficient and reliable growth calibration method for complex oxide films using molecular beam epitaxy.
△ Less
Submitted 19 June, 2017;
originally announced June 2017.
-
Split degenerate states and stable p+ip phases from holography
Authors:
Zhang-Yu Nie,
Qiyuan Pan,
Hua-Bi Zeng,
Hui Zeng
Abstract:
In this paper, we investigate the p+$i$p superfluid phases in the complex vector field holographic p-wave model. We find that in the probe limit, the p+$i$p phase and the p-wave phase are equally stable, hence the p and $i$p orders can be mixed with an arbitrary ratio to form more general p+$λi$p phases, which are also equally stable with the p-wave and p+$i$p phases. As a result, the system posse…
▽ More
In this paper, we investigate the p+$i$p superfluid phases in the complex vector field holographic p-wave model. We find that in the probe limit, the p+$i$p phase and the p-wave phase are equally stable, hence the p and $i$p orders can be mixed with an arbitrary ratio to form more general p+$λi$p phases, which are also equally stable with the p-wave and p+$i$p phases. As a result, the system possesses a degenerate thermal state in the superfluid region. We further study the case with considering the back reaction on the metric, and find that the degenerate ground states will be separated into p-wave and p+$i$p phases, and the p-wave phase is more stable. Finally, due to the different critical temperature of the zeroth order phase transitions from p-wave and p+$i$p phases to the normal phase, there is a temperature region where the p+$i$p phase exists but the p-wave phase doesn't. In this region we find the stable p+$i$p phase for the first time.
△ Less
Submitted 8 February, 2017; v1 submitted 22 November, 2016;
originally announced November 2016.
-
RC-circuit-like dynamic characteristic of the magnetic domain wall in ferromagnetic nanowires
Authors:
Hong-Guang Piao,
Dong-Hyun Kim,
Je-Ho Shim,
Li Qing Pan
Abstract:
We have investigated dynamic behaviors of the magnetic domain wall under perpendicular magnetic field pulses in ferromagnetic nanowires using micromagnetic simulations. It has been found that the perpendicular magnetic field pulse can trigger the magnetic domain wall motion, where all the field torques are kept to be on the plane of nanowire strip. The magnetic domain wall speed faster than severa…
▽ More
We have investigated dynamic behaviors of the magnetic domain wall under perpendicular magnetic field pulses in ferromagnetic nanowires using micromagnetic simulations. It has been found that the perpendicular magnetic field pulse can trigger the magnetic domain wall motion, where all the field torques are kept to be on the plane of nanowire strip. The magnetic domain wall speed faster than several hundreds meters per second is predicted without the Walker breakdown for the perpendicular magnetic driving field stronger than $200~\mathrm{mT}$. Interestingly, the dynamic behavior of the moving magnetic domain wall driven by perpendicular magnetic field pulses is explained by charging- and discharging-like behaviors of an electrical RC-circuit model, where the charging and the discharging of "magnetic charges" on the nanowire planes are considered. The concept of the RC-model-like dynamic characteristic of the magnetic domain wall might be promising for spintronic functional device applications based on the magnetic domain wall motion.
△ Less
Submitted 26 February, 2015;
originally announced February 2015.
-
Artificially engineered superlattices of pnictide superconductor
Authors:
S. Lee,
C. Tarantini,
P. Gao,
J. Jiang,
J. D. Weiss,
F. Kametani,
C. M. Folkman,
Y. Zhang,
X. Q. Pan,
E. E. Hellstrom,
D. C. Larbalestier,
C. B. Eom
Abstract:
Significant progress has been achieved in fabricating high quality bulk and thinfilm iron-based superconductors. In particular, artificial layered pnictide superlattices offer the possibility of tailoring the superconducting properties and understanding the mechanism of the superconductivity itself. For high field applications, large critical current densities (Jc) and irreversibility fields (Hirr…
▽ More
Significant progress has been achieved in fabricating high quality bulk and thinfilm iron-based superconductors. In particular, artificial layered pnictide superlattices offer the possibility of tailoring the superconducting properties and understanding the mechanism of the superconductivity itself. For high field applications, large critical current densities (Jc) and irreversibility fields (Hirr) are indispensable along all crystal directions. On the other hand, the development of superconducting devices such as tunnel junctions requires multilayered heterostructures. Here we show that artificially engineered undoped Ba-122 / Co doped Ba-122 compositionally modulated superlattices produce ab-aligned nanoparticle arrays. These layer and self-assemble along c-axis aligned defects, and combine to produce very large Jc and Hirr enhancements over a wide angular range. We also demonstrate a structurally modulated SrTiO3 (STO) / Co doped Ba-122 superlattice with sharp interfaces. Success in superlattice fabrication involving pnictides will aid the progress of heterostructured systems exhibiting novel interfacial phenomena and device applications.
△ Less
Submitted 12 July, 2013;
originally announced July 2013.
-
Holographic Superconductors in Gauss-Bonnet gravity with Born-Infeld electrodynamics
Authors:
Jiliang **g,
Liancheng Wang,
Qiyuan Pan,
Songbai Chen
Abstract:
We investigate the holographic superconductors in Gauss-Bonnet gravity with Born-Infeld electrodynamics. We find that the Gauss-Bonnet constant, the model parameters and the Born-Infeld coupling parameter will affect the formation of the scalar hair, the transition point of the phase transition from the second order to the first order, and the relation connecting the gap frequency in conductivity…
▽ More
We investigate the holographic superconductors in Gauss-Bonnet gravity with Born-Infeld electrodynamics. We find that the Gauss-Bonnet constant, the model parameters and the Born-Infeld coupling parameter will affect the formation of the scalar hair, the transition point of the phase transition from the second order to the first order, and the relation connecting the gap frequency in conductivity with the critical temperature. The combination of the Gauss-Bonnet gravity and the Born-Infeld electrodynamics provides richer physics in the phase transition and the condensation of the scalar hair.
△ Less
Submitted 3 March, 2011; v1 submitted 3 December, 2010;
originally announced December 2010.
-
Tailoring a two-dimensional electron gas at the LaAlO3/SrTiO3 (001) interface by epitaxial strain
Authors:
C. W. Bark,
D. A. Felker,
Y. Wang,
Y. Zhang,
H. W. Jang,
C. M. Folkman,
J. W. Park,
S. H. Baek,
X. Q. Pan,
E. Y. Tsymbal,
M. S. Rzchowski,
C. B. Eom
Abstract:
Recently a metallic state was discovered at the interface between insulating oxides, most notably LaAlO3 and SrTiO3. Properties of this two-dimensional electron gas (2DEG) have attracted significant interest due to its potential applications in nanoelectronics. Control over this carrier density and mobility of the 2DEG is essential for applications of these novel systems, and may be achieved by ep…
▽ More
Recently a metallic state was discovered at the interface between insulating oxides, most notably LaAlO3 and SrTiO3. Properties of this two-dimensional electron gas (2DEG) have attracted significant interest due to its potential applications in nanoelectronics. Control over this carrier density and mobility of the 2DEG is essential for applications of these novel systems, and may be achieved by epitaxial strain. However, despite the rich nature of strain effects on oxide materials properties, such as ferroelectricity, magnetism, and superconductivity, the relationship between the strain and electrical properties of the 2DEG at the LaAlO3/SrTiO3 heterointerface remains largely unexplored. Here, we use different lattice constant single crystal substrates to produce LaAlO3/SrTiO3 interfaces with controlled levels of biaxial epitaxial strain. We have found that tensile strained SrTiO3 destroys the conducting 2DEG, while compressively strained SrTiO3 retains the 2DEG, but with a carrier concentration reduced in comparison to the unstrained LaAlO3/SrTiO3 interface. We have also found that the critical LaAlO3 overlayer thickness for 2DEG formation increases with SrTiO3 compressive strain. Our first-principles calculations suggest that a strain-induced electric polarization in the SrTiO3 layer is responsible for this behavior. It is directed away from the interface and hence creates a negative polarization charge opposing that of the polar LaAlO3 layer. This both increases the critical thickness of the LaAlO3 layer, and reduces carrier concentration above the critical thickness, in agreement with our experimental results. Our findings suggest that epitaxial strain can be used to tailor 2DEGs properties of the LaAlO3/SrTiO3 heterointerface.
△ Less
Submitted 17 November, 2010;
originally announced November 2010.
-
Strong vortex pinning in Co-doped BaFe2As2 single crystal thin films
Authors:
C. Tarantini,
S. Lee,
Y. Zhang,
J. Jiang,
C. W. Bark,
J. D. Weiss,
A. Polyanskii,
C. T. Nelson,
H. W. Jang,
C. M. Folkman,
S. H. Baek,
X. Q. Pan,
A. Gurevich,
E. E. Hellstrom,
C. B. Eom,
D. C. Larbalestier
Abstract:
We report measurements of the field and angular dependences of Jc of truly epitaxial Co-doped BaFe2As2 thin films grown on SrTiO3/(La,Sr)(Al,Ta)O3 with different SrTiO3 template thicknesses. The films show Jc comparable to Jc of single crystals and a maximum pinning force Fp(0.6Tc) > 5 GN/m3 at H/Hirr ~ 0.5 indicative of strong vortex pinning effective up to high fields. Due to the strong correl…
▽ More
We report measurements of the field and angular dependences of Jc of truly epitaxial Co-doped BaFe2As2 thin films grown on SrTiO3/(La,Sr)(Al,Ta)O3 with different SrTiO3 template thicknesses. The films show Jc comparable to Jc of single crystals and a maximum pinning force Fp(0.6Tc) > 5 GN/m3 at H/Hirr ~ 0.5 indicative of strong vortex pinning effective up to high fields. Due to the strong correlated c-axis pinning, Jc for field along the c-axis exceeds Jc for H//ab plane, inverting the expectation of the Hc2 anisotropy. HRTEM reveals that the strong vortex pinning is due to a high density of nanosize columnar defects.
△ Less
Submitted 27 February, 2010;
originally announced March 2010.
-
Template engineering of Co-doped BaFe2As2 single-crystal thin films
Authors:
S. Lee,
J. Jiang,
C. T. Nelson,
C. W. Bark,
J. D. Weiss,
C. Tarantini,
H. W. Jang,
C. M. Folkman,
S. H. Baek,
A. Polyanskii,
D. Abraimov,
A. Yamamoto,
Y. Zhang,
X. Q. Pan,
E. E. Hellstrom,
D. C. Larbalestier,
C. B. Eom
Abstract:
Understanding new superconductors requires high-quality epitaxial thin films to explore intrinsic electromagnetic properties, control grain boundaries and strain effects, and evaluate device applications. So far superconducting properties of ferropnictide thin films appear compromised by imperfect epitaxial growth and poor connectivity of the superconducting phase. Here we report novel template…
▽ More
Understanding new superconductors requires high-quality epitaxial thin films to explore intrinsic electromagnetic properties, control grain boundaries and strain effects, and evaluate device applications. So far superconducting properties of ferropnictide thin films appear compromised by imperfect epitaxial growth and poor connectivity of the superconducting phase. Here we report novel template engineering using single-crystal intermediate layers of (001) SrTiO3 and BaTiO3 grown on various perovskite substrates that enables genuine epitaxial films of Co-doped BaFe2As2 with high transition temperature (zero resistivity Tc of 21.5K), small transition widths (delta Tc = 1.3K), superior Jc of 4.5 MA/cm2 (4.2K, self field) and strong c-axis flux pinning. Implementing SrTiO3 or BaTiO3 templates to match the alkaline earth layer in the Ba-122 with the alkaline earth-oxygen layer in the templates opens new avenues for epitaxial growth of ferropnictides on multi-functional single crystal substrates. Beyond superconductors, it provides a framework for growing heteroepitaxial intermetallic compounds on various substrates by matching interfacial layers between templates and thin film overlayers.
△ Less
Submitted 1 October, 2009;
originally announced October 2009.
-
Weak-link behavior of grain boundaries in superconducting Ba(Fe1-xCox)2As2 bicrystals
Authors:
S. Lee,
J. Jiang,
J. D. Weiss,
C. M. Folkman,
C. W. Bark,
C. Tarantini,
A. Xu,
D. Abraimov,
A. Polyanskii,
C. T. Nelson,
Y. Zhang,
S. H. Baek,
H. W. Jang,
A. Yamamoto,
F. Kametani,
X. Q. Pan,
E. E. Hellstrom,
A. Gurevich,
C. B. Eom,
D. C. Larbalestier
Abstract:
We show that despite the low anisotropy, strong vortex pinning and high irreversibility field Hirr close to the upper critical field Hc2 of Ba(Fe1-xCox)2As2, the critical current density Jgb across [001] tilt grain boundaries (GBs) of thin film Ba(Fe1-xCox)2As2 bicrystals is strongly depressed, similar to high-Tc cuprates. Our results suggest that weak-linked GBs are characteristic of both cupra…
▽ More
We show that despite the low anisotropy, strong vortex pinning and high irreversibility field Hirr close to the upper critical field Hc2 of Ba(Fe1-xCox)2As2, the critical current density Jgb across [001] tilt grain boundaries (GBs) of thin film Ba(Fe1-xCox)2As2 bicrystals is strongly depressed, similar to high-Tc cuprates. Our results suggest that weak-linked GBs are characteristic of both cuprates and pnictides because of competing orders, low carrier density, and unconventional pairing symmetry.
△ Less
Submitted 16 November, 2009; v1 submitted 21 July, 2009;
originally announced July 2009.
-
Interplay between grain boundary grooving, stress, and dealloying in the agglomeration of NiSi1-xGex films
Authors:
H. B. Yao,
M. Bouville,
D. Z. Chi,
H. P. Sun,
X. Q. Pan,
D. J. Srolovitz,
D. Mangelinck
Abstract:
Germanosilicides, especially those formed on compressive substrates, are less stable than silicides against agglomeration. By studying the solid-state reaction of Ni thin film on strained Si0.8Ge0.2(001), we show that nickel germanosilicide is different from nickel silicide and nickel germanide in several respects: the grains are smaller and faceted, the groove angle is sharper, and dealloying t…
▽ More
Germanosilicides, especially those formed on compressive substrates, are less stable than silicides against agglomeration. By studying the solid-state reaction of Ni thin film on strained Si0.8Ge0.2(001), we show that nickel germanosilicide is different from nickel silicide and nickel germanide in several respects: the grains are smaller and faceted, the groove angle is sharper, and dealloying takes place. The germanium out-diffusion creates a stress in the film which favors grooving and agglomeration.
△ Less
Submitted 18 May, 2006;
originally announced May 2006.
-
Very high upper critical fields in MgB2 produced by selective tuning of impurity scattering
Authors:
A. Gurevich,
S. Patnaik,
V. Braccini,
K. H. Kim,
C. Mielke,
X. Song,
L. D. Cooley,
S. D. Bu,
D. M. Kim,
J. H. Choi,
L. J. Belenky,
J. Giencke,
M. K. Lee,
W. Tian,
X. Q. Pan,
A. Siri,
E. E. Hellstrom,
C. B. Eom,
D. C. Larbalestier
Abstract:
We report a significant enhancement of the upper critical field $H_{c2}$ of different $MgB_2$ samples alloyed with nonmagnetic impurities. By studying films and bulk polycrystals with different resistivities $ρ$, we show a clear trend of $H_{c2}$ increase as $ρ$ increases. One particular high resistivity film had zero-temperature $H_{c2}(0)$ well above the $H_{c2}$ values of competing non-cuprat…
▽ More
We report a significant enhancement of the upper critical field $H_{c2}$ of different $MgB_2$ samples alloyed with nonmagnetic impurities. By studying films and bulk polycrystals with different resistivities $ρ$, we show a clear trend of $H_{c2}$ increase as $ρ$ increases. One particular high resistivity film had zero-temperature $H_{c2}(0)$ well above the $H_{c2}$ values of competing non-cuprate superconductors such as $Nb_3Sn$ and Nb-Ti. Our high-field transport measurements give record values $H_{c2}^\perp (0) \approx 34T$ and $H_{c2}\|(0) \approx 49 T$ for high resistivity films and $H_{c2}(0)\approx 29 T$ for untextured bulk polycrystals. The highest $H_{c2}$ film also exhibits a significant upward curvature of $H_{c2}(T)$, and temperature dependence of the anisotropy parameter $γ(T) = H_{c2}\|/ H_{c2}^\perp$ opposite to that of single crystals: $γ(T)$ decreases as the temperature decreases, from $γ(T_c) \approx 2$ to $γ(0) \approx 1.5$. This remarkable $H_{c2}$ enhancement and its anomalous temperature dependence are a consequence of the two-gap superconductivity in $MgB_2$, which offers special opportunities for further $H_{c2}$ increase by tuning of the impurity scattering by selective alloying on Mg and B sites. Our experimental results can be explained by a theory of two-gap superconductivity in the dirty limit. The very high values of $H_{c2}(T)$ observed suggest that $MgB_2$ can be made into a versatile, competitive high-field superconductor.
△ Less
Submitted 17 September, 2003; v1 submitted 20 May, 2003;
originally announced May 2003.
-
CVD-based approach to the growth of epitaxial MgB2 thin films
Authors:
A. V. Pogrebnyakov,
X. H. Zheng,
A. Kotcharov,
J. E. Jones,
X. X. Xi,
E. M. Lysczek,
J. Redwing,
S. Y. Xu,
Q. Li,
J. Lettiery,
D. G. Schlom,
J. Schallenberger,
Z. K. Liu,
W. Tian,
X. Q. Pan
Abstract:
The paper has been withdrawn
The paper has been withdrawn
△ Less
Submitted 9 April, 2002; v1 submitted 6 April, 2002;
originally announced April 2002.
-
In situ epitaxial MgB2 thin films for superconducting electronics
Authors:
X. H. Zeng,
A. V. Pogrebnyakov,
A. Kotcharov,
J. E. Jones,
X. X. Xi,
E. M. Lysczek,
J. M. Redwing,
S. Y. Xu,
Qi Li,
J. Lettieri,
D. G. Schlom,
W. Tian,
X. Q. Pan,
Z. K. Liu
Abstract:
A thin film technology compatible with multilayer device fabrication is critical for exploring the potential of the 39-K superconductor magnesium diboride for superconducting electronics. Using a Hybrid Physical-Chemical Vapor Deposition (HPCVD) process, it is shown that the high Mg vapor pressure necessary to keep the MgB$_2$ phase thermodynamically stable can be achieved for the {\it in situ}…
▽ More
A thin film technology compatible with multilayer device fabrication is critical for exploring the potential of the 39-K superconductor magnesium diboride for superconducting electronics. Using a Hybrid Physical-Chemical Vapor Deposition (HPCVD) process, it is shown that the high Mg vapor pressure necessary to keep the MgB$_2$ phase thermodynamically stable can be achieved for the {\it in situ} growth of MgB$_2$ thin films. The films grow epitaxially on (0001) sapphire and (0001) 4H-SiC substrates and show a bulk-like $T_c$ of 39 K, a $J_c$(4.2K) of $1.2 \times 10^7$ A/cm$^2$ in zero field, and a $H_{c2}(0)$ of 29.2 T in parallel magnetic field. The surface is smooth with a root-mean-square roughness of 2.5 nm for MgB$_2$ films on SiC. This deposition method opens tremendous opportunities for superconducting electronics using MgB$_2$.
△ Less
Submitted 27 March, 2002;
originally announced March 2002.
-
Superconducting properties of nanocrystalline MgB$_2$ thin films made by an in situ annealing process
Authors:
X. H. Zeng,
A. Sukiasyan,
X. X. Xi,
Y. F. Hu,
E. Wertz,
Qi Li,
W. Tian,
H. P. Sun,
X. Q. Pan,
J. Lettieri,
D. G. Schlom,
C. O. Brubaker,
Zi-Kui Liu,
Qiang Li
Abstract:
We have studied the structural and superconducting properties of MgB$_2$ thin films made by pulsed laser deposition followed by in situ annealing. The cross-sectional transmission electron microscopy reveals a nanocrystalline mixture of textured MgO and MgB$_2$ with very small grain sizes. A zero-resistance transition temperature ($T_{c0}$) of 34 K and a zero-field critical current density (…
▽ More
We have studied the structural and superconducting properties of MgB$_2$ thin films made by pulsed laser deposition followed by in situ annealing. The cross-sectional transmission electron microscopy reveals a nanocrystalline mixture of textured MgO and MgB$_2$ with very small grain sizes. A zero-resistance transition temperature ($T_{c0}$) of 34 K and a zero-field critical current density ($J_c$) of $1.3 \times 10^6$ A/cm$^2$ were obtained. The irreversibility field was $\sim$ 8 T at low temperatures, although severe pinning instability was observed. These bulk-like superconducting properties show that the in situ deposition process can be a viable candidate for MgB$_2$ Josephson junction technologies.
△ Less
Submitted 3 May, 2001;
originally announced May 2001.
-
Short-time dynamics of random-bond Potts ferromagnet with continuous self-dual quenched disorders
Authors:
Z. Q. Pan,
H. P. Ying,
D. W. Gu
Abstract:
We present Monte Carlo simulation results of random-bond Potts ferromagnet with the Olson-Young self-dual distribution of quenched disorders in two-dimensions. By exploring the short-time scaling dynamics, we find universal power-law critical behavior of the magnetization and Binder cumulant at the critical point, and thus obtain estimates of the dynamic exponent $z$ and magnetic exponent $η$, a…
▽ More
We present Monte Carlo simulation results of random-bond Potts ferromagnet with the Olson-Young self-dual distribution of quenched disorders in two-dimensions. By exploring the short-time scaling dynamics, we find universal power-law critical behavior of the magnetization and Binder cumulant at the critical point, and thus obtain estimates of the dynamic exponent $z$ and magnetic exponent $η$, as well as the exponent $θ$. Our special attention is paid to the dynamic process for the $q$=8 Potts model.
△ Less
Submitted 6 March, 2001;
originally announced March 2001.