Showing 1–18 of 18 results for author: Palmer, B

Mechanics and morphology of proliferating cell collectives with self-inhibiting growth

Authors: Scott Weady, Bryce Palmer, Adam Lamson, Taeyoon Kim, Reza Farhadifar, Michael J. Shelley

Abstract: We study the dynamics of proliferating cell collectives whose microscopic constituents' growth is inhibited by macroscopic growth-induced stress. Discrete particle simulations of a growing collective show the emergence of concentric-ring patterns in cell size whose spatio-temporal structure is closely tied to the individual cell's stress response. Motivated by these observations, we derive a multi… ▽ More We study the dynamics of proliferating cell collectives whose microscopic constituents' growth is inhibited by macroscopic growth-induced stress. Discrete particle simulations of a growing collective show the emergence of concentric-ring patterns in cell size whose spatio-temporal structure is closely tied to the individual cell's stress response. Motivated by these observations, we derive a multiscale continuum theory whose parameters map directly to the discrete model. Analytical solutions of this theory show the concentric patterns arise from anisotropically accumulated resistance to growth over many cell cycles. This work shows how purely mechanical processes can affect the internal patterning and morphology of cell collectives, and provides a concise theoretical framework for connecting the micro- to macroscopic dynamics of proliferating matter. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Impact of etches on thin-film single-crystal niobium resonators

Authors: H. Wang, T. Banerjee, T. G. Farinha, A. T. Hanbicki, V. Fatemi, B. S. Palmer, C. J. K. Richardson

Abstract: A single crystal niobium thin film was grown using molecular beam epitaxy on a c-plane sapphire wafer. Several samples were fabricated into dc resistivity test devices and coplanar waveguide resonator chips using the same microfabrication procedures and solvent cleans. The samples were then subject to different acid cleaning treatments using different combinations of piranha, hydrofluoric acid, an… ▽ More A single crystal niobium thin film was grown using molecular beam epitaxy on a c-plane sapphire wafer. Several samples were fabricated into dc resistivity test devices and coplanar waveguide resonator chips using the same microfabrication procedures and solvent cleans. The samples were then subject to different acid cleaning treatments using different combinations of piranha, hydrofluoric acid, and buffered oxide etch solutions. The different samples expressed changes in dc resistivity in the normal and superconducting states such that the low temperature resistivities changed by more than 100\%, and the residual resistivity ratio dropped by a factor of 2. The internal quality factor of coplanar waveguide resonators measured near 5~GHz also showed significant variation at single photon powers ranging from 1.4$\times 10^6$ to less than 60$\times 10^3$. These changes correlate with the formation of surface crystallites that appear to be hydrocarbons. All observations are consistent with hydrogen diffusing into the niobium film at levels below the saturation threshold that is needed to observe niobium hydrides. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Characterization of Asymmetric Gap-Engineered Josephson Junctions and 3D Transmon Qubits

Authors: Zach Steffen, S. K. Dutta, Haozhi Wang, Kungang Li, Yizhou Huang, Yi-Hsiang Huang, Advait Mathur, F. C. Wellstood, B. S. Palmer

Abstract: We have fabricated and characterized asymmetric gap-engineered junctions and transmon devices. To create Josephson junctions with asymmetric gaps, Ti was used to proximitize and lower the superconducting gap of the Al counter-electrode. DC IV measurements of these small, proximitized Josephson junctions show a reduced gap and larger excess current for voltage biases below the superconducting gap w… ▽ More We have fabricated and characterized asymmetric gap-engineered junctions and transmon devices. To create Josephson junctions with asymmetric gaps, Ti was used to proximitize and lower the superconducting gap of the Al counter-electrode. DC IV measurements of these small, proximitized Josephson junctions show a reduced gap and larger excess current for voltage biases below the superconducting gap when compared to standard Al/AlOx/Al junctions. The energy relaxation time constant for an Al/AlOx/Al/Ti 3D transmon was T1 = 1 μs, over two orders of magnitude shorter than the measured T1 = 134 μs of a standard Al/AlOx/Al 3D transmon. Intentionally adding disorder between the Al and Ti layers reduces the proximity effect and subgap current while increasing the relaxation time to T1 = 32 μs. △ Less

Submitted 23 February, 2023; originally announced February 2023.

Comments: 5 pages, 3 figures, to be published in IEEE Transactions on Applied Superconductivity

Data Mining for Terahertz Generation Crystals

Authors: Gabriel A. Valdivia-Berroeta, Zachary B. Zaccardi, Sydney K. F. Pettit, Sin-Hang Ho, Bruce Wayne Palmer, Matthew J. Lutz, Claire Rader, Brittan P. Hunter, Natalie K. Green, Connor Barlow, Coriantumr Z. Wayment, Daisy J. Harmon, Paige Petersen, Stacey J. Smith, David J. Michaelis, Jeremy A. Johnson

Abstract: We demonstrate a data mining approach to discover and develop new organic nonlinear optical crystals that produce intense pulses of terahertz radiation. We mine the Cambridge Structural Database for non-centrosymmetric materials and use this structural data in tandem with density functional theory calculations to predict new materials that efficiently generate terahertz radiation. This enables us… ▽ More We demonstrate a data mining approach to discover and develop new organic nonlinear optical crystals that produce intense pulses of terahertz radiation. We mine the Cambridge Structural Database for non-centrosymmetric materials and use this structural data in tandem with density functional theory calculations to predict new materials that efficiently generate terahertz radiation. This enables us to (in a relatively short time) discover, synthesize, and grow large, high-quality crystals of four promising materials and characterize them for intense terahertz generation. In a direct comparison to the current state-of-the-art organic terahertz generation crystals, these new materials excel. The discovery and characterization of these novel terahertz generators validates the approach of combining data mining with density functional theory calculations to predict properties of high-performance organic materials, potentially for a host of exciting applications. △ Less

Submitted 10 September, 2021; originally announced September 2021.

Comments: 16 pages, 5 figures

Hydrodynamic instabilities and collective dynamics in activity-balanced pusher-puller mixtures

Authors: Bryce Palmer, Wen Yan, Tong Gao

Abstract: Microorganisms living in microfluidic environments often form multi-species swarms, where they can leverage collective motions to achieve enhanced transport and spreading. Nevertheless, there is a general lack of physical understandings of the origins of the multiscale unstable dynamics observed within these systems. Here, we build a computational model to study binary suspensions of rear- and fro… ▽ More Microorganisms living in microfluidic environments often form multi-species swarms, where they can leverage collective motions to achieve enhanced transport and spreading. Nevertheless, there is a general lack of physical understandings of the origins of the multiscale unstable dynamics observed within these systems. Here, we build a computational model to study binary suspensions of rear- and front-actuated microswimmers, or respectively the so-called "pusher" and "puller" particles, that have different populations and swimming speeds. We perform direct particle simulations to reveal that collective system dynamics are possible even in the scenario of an "activity-balanced" mixture, which produces near zero mean extra stress. We first construct a continuum kinetic model to describe the initial transient period when the system is near uniform isotropy and then perform linear stability analysis to reveal the system's finite-wavelength hydrodynamic instabilities, in contrast with the long-wavelength instabilities of pure pusher/puller suspensions. Then, we carry out slender-body discrete particle simulations to resolve both the short time instabilities and the the longtime dynamics, which feature non-trivial density fluctuations and spatially-correlated motions, distinct from those of single-species. △ Less

Submitted 11 February, 2022; v1 submitted 9 July, 2021; originally announced July 2021.

Microwave attenuators for use with quantum devices below 100 mK

Authors: Jen-Hao Yeh, Jay LeFebvre, Shavindra Premaratne, F. C. Wellstood, B. S. Palmer

Abstract: To reduce the level of thermally generated electrical noise transmitted to superconducting quantum devices operating at 20 mK, we have developed thin-film microwave power attenuators operating from 1 to 10 GHz. The 20 dB and 30 dB attenuators are built on a quartz substrate and use 75 nm thick films of nichrome for dissipative components and 0.001 mm thick silver films as hot electron heat sinks.… ▽ More To reduce the level of thermally generated electrical noise transmitted to superconducting quantum devices operating at 20 mK, we have developed thin-film microwave power attenuators operating from 1 to 10 GHz. The 20 dB and 30 dB attenuators are built on a quartz substrate and use 75 nm thick films of nichrome for dissipative components and 0.001 mm thick silver films as hot electron heat sinks. The noise temperature of the attenuators was quantified by connecting the output to a 3D cavity containing a transmon qubit and extracting the dephasing rate of the qubit as a function of temperature and dissipated power P_d in the attenuator. The minimum noise temperature T_n of the output from the 20 dB attenuator was T_n less than and equal to 53 mK for no additional applied power and T_n about 120 mK when dissipating 30 nW. In the limit of large dissipated power (P_d > 1 nW) we find T_n proportional to P_d^(1/5.4), consistent with detailed thermal modeling of heat flow in the attenuators. △ Less

Submitted 9 June, 2017; v1 submitted 3 March, 2017; originally announced March 2017.

Journal ref: Journal of Applied Physics 121, 224501 (2017)

Nonlinear microwave photon-occupancy of a driven resonator strongly coupled to a transmon qubit

Authors: Baladitya Suri, Zach Keane, Lev S. Bishop, Sergey Novikov, Frederick C. Wellstood, Ben S. Palmer

Abstract: We measure photon-occupancy in a thin-film superconducting lumped element resonator coupled to a transmon qubit at 20$\,$mK and find a nonlinear dependence on the applied microwave power. The transmon-resonator system was operated in the strong dispersive regime, where the ac Stark shift ($2χ$) due to a single microwave photon present in the resonator was larger than the linewidth ($Γ$) of the qub… ▽ More We measure photon-occupancy in a thin-film superconducting lumped element resonator coupled to a transmon qubit at 20$\,$mK and find a nonlinear dependence on the applied microwave power. The transmon-resonator system was operated in the strong dispersive regime, where the ac Stark shift ($2χ$) due to a single microwave photon present in the resonator was larger than the linewidth ($Γ$) of the qubit transition. When the resonator was coherently driven at $5.474325\,$GHz, the transition spectrum of the transmon at $4.982\,$GHz revealed well-resolved peaks, each corresponding to an individual photon number-state of the resonator. From the relative peak-heights we obtain the occupancy of the photon-states and the average photon-occupancy $\bar{n}$ of the resonator. We observed a nonlinear variation of $\bar{n}$ with the applied drive power $P_{rf}$ for $\bar{n} < 5$ and compare our results to numerical simulations of the system-bath master equation in the steady state, as well as to a semi-classical model for the resonator that includes the Jaynes-Cummings interaction between the transmon and the resonator. We find good quantitative agreement using both models and analysis reveals that the nonlinear behavior is principally due to shifts in the resonant frequency caused by a qubit-induced Jaynes-Cummings nonlinearity. △ Less

Submitted 31 October, 2015; originally announced November 2015.

Comments: 5 figures

Journal ref: Phys. Rev. A 92, 063801 (2015)

A Trapped Field of 17.6 T in Melt-Processed, Bulk Gd-Ba-Cu-O Reinforced with Shrink-Fit Steel

Authors: John H. Durrell, Anthony R. Dennis, Jan Jaroszynski, Mark D. Ainslie, Kysen G. B. Palmer, Yunhua Shi, Archie M. Campbell, John Hull, Mike Strasik, Eric Hellstrom, David A. Cardwell

Abstract: The ability of large grain, REBa$_{2}$Cu$_{3}$O$_{7-δ}$ [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance impr… ▽ More The ability of large grain, REBa$_{2}$Cu$_{3}$O$_{7-δ}$ [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance improvement in these technologically important materials. In this work, we report a trapped field of 17.6 T, the largest reported to date, in a stack of two, silver-doped GdBCO superconducting bulk samples, each of diameter 25 mm, fabricated by top-seeded melt growth (TSMG) and reinforced with shrink-fit stainless steel. This sample preparation technique has the advantage of being relatively straightforward and inexpensive to implement and offers the prospect of easy access to portable, high magnetic fields without any requirement for a sustaining current source. △ Less

Submitted 7 July, 2014; v1 submitted 3 June, 2014; originally announced June 2014.

Comments: Updated submission to reflect licence change to CC-BY. This is the "author accepted manuscript" and is identical in content to the published version

Journal ref: Supercond. Sci. Technol. 27 082001 (2014)

Autler-Townes splitting in a three-dimensional transmon superconducting qubit

Authors: S. Novikov, J. E. Robinson, Z. K. Keane, B. Suri, F. C. Wellstood, B. S. Palmer

Abstract: We have observed the Autler-Townes doublet in a superconducting Al/AlOx/Al transmon qubit that acts as an artificial atom embedded in a three-dimensional Cu microwave cavity at a temperature of 22 mK. Using pulsed microwave spectroscopy, the three lowest transmon levels are isolated, eliminating unwanted effects of higher qubit modes and cavity modes. The long coherence time (~40 us) of the transm… ▽ More We have observed the Autler-Townes doublet in a superconducting Al/AlOx/Al transmon qubit that acts as an artificial atom embedded in a three-dimensional Cu microwave cavity at a temperature of 22 mK. Using pulsed microwave spectroscopy, the three lowest transmon levels are isolated, eliminating unwanted effects of higher qubit modes and cavity modes. The long coherence time (~40 us) of the transmon enables us to observe a clear Autler-Townes splitting at drive amplitudes much smaller than the transmon level anharmonicity (177 MHz). Three-level density matrix simulations with no free parameters provide excellent fits to the data. At maximum separation, the fidelity of a dark state achieved in this experiment is estimated to be 99.6-99.9%. △ Less

Submitted 2 August, 2013; originally announced August 2013.

Journal ref: Phys. Rev. B 88, 060503(R) (2013)

Spectroscopy of a Cooper-Pair Box Coupled to a Two-Level System Via Charge and Critical Current

Authors: V. Zaretskey, B. Suri, S. Novikov, F. C. Wellstood, B. S. Palmer

Abstract: We report on the quadrupling of the transition spectrum of an Al/AlOx/Al Cooper-pair box (CPB) charge qubit in the 4.0-7.3 GHz frequency range. The qubit was coupled to a quasi-lumped element Al superconducting resonator and measured at a temperature of 25 mK. We obtained good matches between the observed spectrum and the spectra calculated from a model Hamiltonian containing two distinct low exci… ▽ More We report on the quadrupling of the transition spectrum of an Al/AlOx/Al Cooper-pair box (CPB) charge qubit in the 4.0-7.3 GHz frequency range. The qubit was coupled to a quasi-lumped element Al superconducting resonator and measured at a temperature of 25 mK. We obtained good matches between the observed spectrum and the spectra calculated from a model Hamiltonian containing two distinct low excitation energy two-level systems (TLS) coupled to the CPB. In our model, each TLS has a charge that tunnels between two sites in a local potential and induces a change in the CPB critical current. By fitting the model to the spectrum, we have extracted microscopic parameters of the fluctuators including the well asymmetry, tunneling rate, and a surprisingly large fractional change (30-40%) in the critical current (12 nA). This large change is consistent with a Josephson junction with a non-uniform tunnel barrier containing a few dominant conduction channels and a TLS that modulates one of them. △ Less

Submitted 16 May, 2013; originally announced May 2013.

Comments: 9 pages, 5 figures

Journal ref: Phys. Rev. B 87, 174522 (2013)

Decoupling a Cooper-pair box to enhance the lifetime to 0.2 ms

Authors: Z. Kim, B. Suri, V. Zaretskey, S. Novikov, K. D. Osborn, A. Mizel, F. C. Wellstood, B. S. Palmer

Abstract: We present a circuit QED experiment in which a separate transmission line is used to address a quasi-lumped element superconducting microwave resonator which is in turn coupled to an Al/AlO$_{x}$/Al Cooper-pair box (CPB) charge qubit. In our measurements we find a strong correlation between the measured lifetime of the CPB and the coupling between the qubit and the transmission line. By monitoring… ▽ More We present a circuit QED experiment in which a separate transmission line is used to address a quasi-lumped element superconducting microwave resonator which is in turn coupled to an Al/AlO$_{x}$/Al Cooper-pair box (CPB) charge qubit. In our measurements we find a strong correlation between the measured lifetime of the CPB and the coupling between the qubit and the transmission line. By monitoring perturbations of the resonator's 5.44 GHz resonant frequency, we have measured the spectrum, lifetime ($T_{1}$), Rabi, and Ramsey oscillations of the CPB at the charge degeneracy point while the CPB was detuned by up to 2.5 GHz . We find a maximum lifetime of the CPB was $T_{1} = 200\ μ$s for $f = 4$ to 4.5 GHz. Our measured $T_{1}$'s are consistent with loss due to coupling to the transmission line, spurious microwave circuit resonances, and a background decay rate on the order of $5\times 10^{3}$ s$^{-1}$ of unknown origin, implying that the loss tangent in the AlO$_{x}$ junction barrier must be less than about $4\times 10^{-8}$ at 4.5 GHz, about 4 orders of magnitude less than reported in larger area Al/AlO$_{x}$/Al tunnel junctions. △ Less

Submitted 1 March, 2011; v1 submitted 24 January, 2011; originally announced January 2011.

Journal ref: Phys. Rev. Lett. 106, 120501 (2011)

Characterization of an entangled system of two superconducting qubits using a multiplexed capacitance readout

Authors: M. D. Shaw, J. F. Schneiderman, J. Bueno, B. S. Palmer, P. Delsing, P. M. Echternach

Abstract: We characterize a pair of Cooper-pair boxes coupled with a fixed capacitor using spectroscopy and measurements of the ground-state quantum capacitance. We use the extracted parameters to estimate the concurrence, or degree of entanglement between the two qubits. We also present a thorough demonstration of a multiplexed quantum capacitance measurement technique, which is in principle scalable to… ▽ More We characterize a pair of Cooper-pair boxes coupled with a fixed capacitor using spectroscopy and measurements of the ground-state quantum capacitance. We use the extracted parameters to estimate the concurrence, or degree of entanglement between the two qubits. We also present a thorough demonstration of a multiplexed quantum capacitance measurement technique, which is in principle scalable to a large array of superconducting qubits. △ Less

Submitted 17 December, 2008; v1 submitted 12 December, 2008; originally announced December 2008.

Comments: 8 pages, 5 figures. Replaced version includes one additional reference, and figures which are better suited to grayscale

Journal ref: Phys. Rev. B 79, 014516 (2009)

Anomalous avoided level crossings in a Cooper-pair box spectrum

Authors: Z. Kim, V. Zaretskey, Y. Yoon, J. F. Schneiderman, M. D. Shaw, P. M. Echternach, F. C. Wellstood, B. S. Palmer

Abstract: We have observed a few distinct anomalous avoided level crossings and voltage dependent transitions in the excited state spectrum of an Al/AlOx/Al Cooper-pair box (CPB). The device was measured at 40 mK in the 15 - 50 GHz frequency range. We find that a given level crosses the CPB spectrum at two different gate voltages; the frequency and splitting size of the two crossings differ and the splitt… ▽ More We have observed a few distinct anomalous avoided level crossings and voltage dependent transitions in the excited state spectrum of an Al/AlOx/Al Cooper-pair box (CPB). The device was measured at 40 mK in the 15 - 50 GHz frequency range. We find that a given level crosses the CPB spectrum at two different gate voltages; the frequency and splitting size of the two crossings differ and the splitting size depends on the Josephson energy of the CPB. We show that this behavior is not only consistent with the CPB being coupled to discrete charged "two-level" quantum systems which move atomic distances in the CPB junctions but that the spectra provide new information about the fluctuators, which is not available from phase qubit spectra of anomalous avoided levels. In particular by fitting a model Hamiltonian to our data, we extract microscopic parameters for each fluctuator, including well asymmetry, tunneling amplitude, and the minimum hop** distance for each fluctuator. The tunneling rates range from less than 3.5 to 13 GHz, which represent values between 5% and 150% of the well asymmetry, and the dipole moments give a minimum hop** distance of 0.3 to 0.8 Anstrom. We have also found that these discrete two-level systems have a pronounced effect on the relaxation time (T1) of the quantum states of the CPB and hence can be a source of dissipation for superconducting quantum bits. △ Less

Submitted 15 October, 2008; v1 submitted 14 October, 2008; originally announced October 2008.

Journal ref: published in Physical Review B 78, 144506 (2008)

Spectroscopy of Charge Fluctuators Coupled to a Cooper Pair Box

Authors: F. C. Wellstood, Z. Kim, B. Palmer

Abstract: We analyze the behavior of a Cooper Pair Box (CPB) that is coupled to charge fluctuators that reside in the dielectric barrier layer in the box's ultra-small tunnel junction. We derive the Hamiltonian of the combined system and find the coupling between the CPB and the fluctuators as well as a coupling between the fluctuators that is due to the CPB. We then find the energy levels and transition… ▽ More We analyze the behavior of a Cooper Pair Box (CPB) that is coupled to charge fluctuators that reside in the dielectric barrier layer in the box's ultra-small tunnel junction. We derive the Hamiltonian of the combined system and find the coupling between the CPB and the fluctuators as well as a coupling between the fluctuators that is due to the CPB. We then find the energy levels and transition spectrum numerically for the case of a CPB coupled to a single charge fluctuator, where we treat the fluctuator as a two-level system that tunnels between two sites. The resulting spectra show the usual transition spectra of the CPB plus distinctive transitions due to excitation of the fluctuator; the fluctuator transitions are 2-e periodic and resemble saw-tooth patterns when plotted as a function of the gate voltage applied to the box. The combined CPB fluctuator spectra show small second-order avoided crossings with a size that depends on the gate voltage. Finally, we discuss how the microscopic parameters of the model, such as the charge times the hop** distance, the tunneling rate between the hop** sites, and the energy difference between the hop** sites, can be extracted from CPB spectra, and why this yields more information than can be found from similar spectra from phase qubits. △ Less

Submitted 28 May, 2008; originally announced May 2008.

Quasiparticle Poisoning and Quantum Coherence in a Differential Charge Qubit

Authors: J. F. Schneiderman, M. D. Shaw, B. Palmer, P. Delsing, P. M. Echternach

Abstract: We demonstrate the operation of a differential single Cooper-pair box, a charge qubit consisting of two aluminum islands, isolated from ground, coupled by a pair of small-area Josephson junctions, and read out with a superconducting differential radio-frequency single electron transistor. We have tested four devices, all of which show evidence of quasiparticle poisoning. The devices are characte… ▽ More We demonstrate the operation of a differential single Cooper-pair box, a charge qubit consisting of two aluminum islands, isolated from ground, coupled by a pair of small-area Josephson junctions, and read out with a superconducting differential radio-frequency single electron transistor. We have tested four devices, all of which show evidence of quasiparticle poisoning. The devices are characterized with microwave spectroscopy and temperature dependence studies, and Coulomb staircases are shown to be e-periodic in all samples. However, coherent control is still possible with non-adiabatic voltage pulses. Coherent oscillation experiments and a relaxation time measurement were performed using a charge derivative readout technique. △ Less

Submitted 4 May, 2007; originally announced May 2007.

Comments: 9 pages, 5 figures, two column format

Do**-Dependent Nonlinear Meissner Effect and Spontaneous Currents in High-Tc Superconductors

Authors: Sheng-Chiang Lee, Mathew Sullivan, Gregory R. Ruchti, Steven M. Anlage, Benjamin Palmer, B. Maiorov, E. Osquiguil

Abstract: We measure the local harmonic generation from superconducting thin films at microwave frequencies to investigate the intrinsic nonlinear Meissner effect near Tc in zero magnetic field. Both second and third harmonic generation are measured to identify time-reversal symmetry breaking (TRSB) and time-reversal symmetric (TRS) nonlinearities. We perform a systematic do**-dependent study of the non… ▽ More We measure the local harmonic generation from superconducting thin films at microwave frequencies to investigate the intrinsic nonlinear Meissner effect near Tc in zero magnetic field. Both second and third harmonic generation are measured to identify time-reversal symmetry breaking (TRSB) and time-reversal symmetric (TRS) nonlinearities. We perform a systematic do**-dependent study of the nonlinear response and find that the TRS characteristic nonlinearity current density scale follows the do** dependence of the de-pairing critical current density. We also extract a spontaneous TRSB characteristic current density scale that onsets at Tc, grows with decreasing temperature, and systematically decreases in magnitude (at fixed T/Tc) with under-do**. The origin of this current scale could be Josephson circulating currents or the spontaneous magnetization associated with a TRSB order parameter. △ Less

Submitted 9 September, 2004; v1 submitted 25 May, 2004; originally announced May 2004.

Comments: 7 pages, 5 figures, re-submitted to PRB in Sep 2004

Journal ref: Phys. Rev. B 71, 014507 (2005).

Induced spin polarisation in a ferromagnetic gadolinium-yttrium alloy

Authors: J. A. Duffy, S. B. Dugdale, J. E. McCarthy, M. A. Alam, M. J. Cooper, S. B. Palmer, T. Jarlborg

Abstract: The first direct evidence of an induced spin moment in Gd(62.4)Y(37.6) is presented. This additional moment, of 0.16 +/- 0.03 Bohr magnetons, arises from polarisation of Y electrons in the alloy. The moment was detected in a Compton scattering experiment via the measurement of the one dimensional projection of the momentum space electron spin density in Gd and in the alloy. The result is consist… ▽ More The first direct evidence of an induced spin moment in Gd(62.4)Y(37.6) is presented. This additional moment, of 0.16 +/- 0.03 Bohr magnetons, arises from polarisation of Y electrons in the alloy. The moment was detected in a Compton scattering experiment via the measurement of the one dimensional projection of the momentum space electron spin density in Gd and in the alloy. The result is consistent with theoretical predictions calculated using the LMTO method within the local spin density approximation. △ Less

Submitted 11 June, 1999; originally announced June 1999.

Comments: 4 pages, 2 figures

Fermi Surface as the Driving Mechanism for Helical Antiferromagnetic Ordering in Gd-Y Alloys

Authors: H. M. Fretwell, S. B. Dugdale, M. A. Alam, D. C. R. Hedley, A. Rodriguez-Gonzalez, S. B. Palmer

Abstract: The first direct experimental evidence for the Fermi surface (FS) driving the helical antiferromagnetic ordering in a gadolinium-yttrium alloy is reported. The presence of a FS sheet capable of nesting is revealed, and the nesting vector associated with the sheet is found to be in excellent agreement with the periodicity of the helical ordering. The first direct experimental evidence for the Fermi surface (FS) driving the helical antiferromagnetic ordering in a gadolinium-yttrium alloy is reported. The presence of a FS sheet capable of nesting is revealed, and the nesting vector associated with the sheet is found to be in excellent agreement with the periodicity of the helical ordering. △ Less

Submitted 3 September, 1998; originally announced September 1998.

Comments: 4 pages, 4 figures