-
Atomistic mechanism of friction force independence on the normal load and other friction laws for dynamic structural superlubricity
Authors:
Nikolay V. Brilliantov,
Alexey A. Tsukanov,
Artem K. Grebenko,
Albert G. Nasibulin,
Igor A. Ostanin
Abstract:
We explore dynamic structural superlubricity for the case of a relatively large contact area, where the friction force is proportional to the area (exceeding $\sim 100\,nm^2$) experimentally, numerically, and theoretically. We use a setup comprised of two molecular smooth incommensurate surfaces -- graphene-covered tip and substrate. The experiments and MD simulations demonstrate independence of t…
▽ More
We explore dynamic structural superlubricity for the case of a relatively large contact area, where the friction force is proportional to the area (exceeding $\sim 100\,nm^2$) experimentally, numerically, and theoretically. We use a setup comprised of two molecular smooth incommensurate surfaces -- graphene-covered tip and substrate. The experiments and MD simulations demonstrate independence of the friction force on the normal load, for a wide range of normal loads and relative surface velocities. We propose an atomistic mechanism of this phenomenon, associated with synchronic out-of-plane surface fluctuations of thermal origin, and confirm it by numerical experiments. Based on this mechanism, we develop a theory for this type of superlubricity and show that friction force increases linearly with increasing temperature and relative velocity, for velocities, larger than a threshold velocity. The MD results are in a fair agreement with predictions of the theory.
△ Less
Submitted 18 November, 2023;
originally announced November 2023.
-
Local ultra-densification of single-walled carbon nanotube films: modeling and experiment
Authors:
Artem K. Grebenko,
Grigorii Drozdov,
Yuriy G. Gladush,
Igor Ostanin,
Sergey S. Zhukov,
Aleksandr V. Melentyev,
Eldar M. Khabushev,
Alexey P. Tsapenko,
Dmitry V. Krasnikov,
Boris Afinogenov,
Alexei G. Temiryazev,
Viacheslav V. Dremov,
Traian Dumitricã,
Mengjun Li,
Hussein Hijazi,
Vitaly Podzorov,
Leonard C. Feldman,
Albert G. Nasibulin
Abstract:
Fabrication of nanostructured metasurfaces poses a significant technological and fundamental challenge. Despite develo** novel systems that support reversible elongation and distortion, their nanoscale patterning and control of optical properties remain an open problem. Herein we report the atomic force microscope lithography (AFML) application for nanoscale patterning of single-walled carbon na…
▽ More
Fabrication of nanostructured metasurfaces poses a significant technological and fundamental challenge. Despite develo** novel systems that support reversible elongation and distortion, their nanoscale patterning and control of optical properties remain an open problem. Herein we report the atomic force microscope lithography (AFML) application for nanoscale patterning of single-walled carbon nanotube films and the associated reflection coefficient tuning. We present models of bundling reorganization, formed-pattern stability, and energy distribution describing mechanical behavior with mesoscopic distinct element method (MDEM). All observed and calculated phenomena support each other and present a platform for develo** AFML patterned optical devices using meshy nanostructured matter.
△ Less
Submitted 12 March, 2022;
originally announced March 2022.
-
Simulation-Guided Optimization of Granular Phononic Crystal Structure Using the Discrete Element Method
Authors:
Igor Ostanin,
Hongyang Cheng,
Vanessa Magnanimo
Abstract:
The paper describes a novel methodology of designing granular phononic crystals for acoustic wave manipulations. A discrete element method is utilized to model the dynamics of a pulse wave propagating through the densely packed assembly of elastic spherical particles with an embedded phononic crystal - the region consisting of a certain arrangement of particles with varying densities. We suggest a…
▽ More
The paper describes a novel methodology of designing granular phononic crystals for acoustic wave manipulations. A discrete element method is utilized to model the dynamics of a pulse wave propagating through the densely packed assembly of elastic spherical particles with an embedded phononic crystal - the region consisting of a certain arrangement of particles with varying densities. We suggest an optimization strategy that extremizes the useful properties of a granular phononic crystal, which are described in terms of a noise-proof functional based on frequency-wavenumber summation of spectral energy density. Few types of efficient phononic crystals are identified. The suggested methodology is of interest for a number of applications, in particular, for seismic shielding and selective sound absorption.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Densification of Single-Walled Carbon Nanotube Films: Mesoscopic Distinct Element Method Simulations and Experimental Validation
Authors:
Grigorii Drozdov,
Igor Ostanin,
Hao Xu,
Yuezhou Wang,
Traian Dumitrică,
Artem Grebenko,
Alexey P. Tsapenko,
Yuriy Gladush,
Georgy Ermolaev,
Valentyn S. Volkov,
Sebastian Eibl,
Ulrich Rüde,
Albert G. Nasibulin
Abstract:
Nanometer thin single-walled carbon nanotube (CNT) films collected from the aerosol chemical deposition reactors have gathered attention for their promising applications. Densification of these pristine films provides an important way to manipulate the mechanical, electronic, and optical properties. To elucidate the underlying microstructural level restructuring, which is ultimately responsible fo…
▽ More
Nanometer thin single-walled carbon nanotube (CNT) films collected from the aerosol chemical deposition reactors have gathered attention for their promising applications. Densification of these pristine films provides an important way to manipulate the mechanical, electronic, and optical properties. To elucidate the underlying microstructural level restructuring, which is ultimately responsible for the change in properties, we perform large scale vector-based mesoscopic distinct element method simulations in conjunction with electron microscopy and spectroscopic ellipsometry characterization of pristine and densified films by drop-cast volatile liquid processing. Matching the microscopy observations, pristine CNT films with finite thickness are modeled as self-assembled CNT networks comprising entangled dendritic bundles with branches extending down to individual CNTs. Simulations of the film under uniaxial compression uncover an ultra-soft densification regime extending to a ~75% strain, which is likely accessible with the surface tensional forces arising from liquid surface tension during the evaporation. When removing the loads, the pre-compressed samples evolve into homogeneously densified films with thickness values depending on both the pre-compression level and the sample microstructure. The significant reduction in thickness, confirmed by our spectroscopic ellipsometry, is attributed to the underlying structural changes occurring at the 100 nm scale, including the zip** of the thinnest dendritic branches.
△ Less
Submitted 29 August, 2020;
originally announced August 2020.
-
Collapse modes in SC and BCC arrangements of elastic beads
Authors:
Igor A. Ostanin,
Artem R. Oganov,
Vanessa Magnanimo
Abstract:
Collapse modes in compressed simple cubic (SC) and body-centered cubic (BCC) periodic arrangements of elastic frictionless beads were studied numerically using the discrete element method. Under pure hydrostatic compression, the SC arrangement tends to transform into a defective hexagonal close-packed or amorphous structure. The BCC assembly exhibits several modes of collapse, one of which, identi…
▽ More
Collapse modes in compressed simple cubic (SC) and body-centered cubic (BCC) periodic arrangements of elastic frictionless beads were studied numerically using the discrete element method. Under pure hydrostatic compression, the SC arrangement tends to transform into a defective hexagonal close-packed or amorphous structure. The BCC assembly exhibits several modes of collapse, one of which, identified as cI16 structure, is consistent with the behavior of BCC metals Li and Na under high pressure. The presence of a deviatoric stress leads to the transformation of the BCC structure into face-centered cubic (FCC) one via the Bain path. The observed effects provide important insights on the origins of mechanical behavior of atomic systems, while the elastic spheres model used in our work can become a useful paradigm, expanding the capabilities of a hard sphere model widely used in many branches of science.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
-
Computational Study of Ultrathin CNT Films with the Scalable Mesoscopic Distinct Element Method
Authors:
Igor Ostanin,
Traian Dumitrică,
Sebastian Eibl,
Ulrich Rüde
Abstract:
In this work we present a computational study of the small strain mechanics of freestanding ultrathin CNT films under in-plane loading. The numerical modeling of the mechanics of representatively large specimens with realistic micro- and nanostructure is presented. Our simulations utilize the scalable implementation of the mesoscopic distinct element method of the waLBerla multi-physics framework.…
▽ More
In this work we present a computational study of the small strain mechanics of freestanding ultrathin CNT films under in-plane loading. The numerical modeling of the mechanics of representatively large specimens with realistic micro- and nanostructure is presented. Our simulations utilize the scalable implementation of the mesoscopic distinct element method of the waLBerla multi-physics framework. Within our modeling approach, CNTs are represented as chains of interacting rigid segments. Neighboring segments in the chain are connected with elastic bonds, resolving tension, bending, shear and torsional deformations. These bonds represent a covalent bonding within CNT surface and utilize Enhanced Vector Model (EVM) formalism. Segments of the neighboring CNTs interact with realistic coarse-grained anisotropic vdW potential, enabling relative slip of CNTs in contact. The advanced simulation technique allowed us to gain useful insights on the behavior of CNT materials. In particular, it was established that the energy dissipation during CNT sliding leads to extended load transfer that conditions material-like mechanical response of the weakly bonded assemblies of CNTs.
△ Less
Submitted 19 October, 2019; v1 submitted 13 May, 2019;
originally announced May 2019.
-
Optimization-based approach to the calibration of mesoscale mechanical models for carbon nanotube systems
Authors:
Vitaliy Petrov,
Igor Ostanin,
Petr Zhilyaev
Abstract:
A new mesoscale mechanical model, describing elastic interactions in carbon nanotubes (CNT) and other nanofilaments, is proposed. Functional form of the developed model is based on enhanced vector model (EVM) that describes basic types of bond deformations: tension, torsion, bending and shear. Calibration of bond stiffnesses is performed by adjusting EVM parameters to reproduce both CNT's deformat…
▽ More
A new mesoscale mechanical model, describing elastic interactions in carbon nanotubes (CNT) and other nanofilaments, is proposed. Functional form of the developed model is based on enhanced vector model (EVM) that describes basic types of bond deformations: tension, torsion, bending and shear. Calibration of bond stiffnesses is performed by adjusting EVM parameters to reproduce both CNT's deformation energies and shape observed in a full-atomistic simulation. The parameters obtained are compared with the ones obtained from Euler-Bernoulli beam theory considerations. It is found that after certain critical length of a tested CNT specimen its stiffness parameters become length-independent and can be used in mesoscale simulations of CNTs of arbitrary length.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
High-Performance Numerical Modeling of Nanofabrics with Distinct Element Method
Authors:
Igor A. Ostanin
Abstract:
A universal framework for modeling composites and fabrics of micro- and nanofibers, such as carbon nanotubes, carbon fibers and amyloid fibrils, is presented. Within this framework, fibers are represented with chains of rigid bodies, linked with elastic bonds. Elasticity of the bonds utilizes recently developed enhanced vector model formalism. The type of interactions between fibers is determined…
▽ More
A universal framework for modeling composites and fabrics of micro- and nanofibers, such as carbon nanotubes, carbon fibers and amyloid fibrils, is presented. Within this framework, fibers are represented with chains of rigid bodies, linked with elastic bonds. Elasticity of the bonds utilizes recently developed enhanced vector model formalism. The type of interactions between fibers is determined by their nature and physical length scale of the simulation. The dynamics of fibers is computed using the modification of rigid particle dynamics module of the waLBerla multiphysics framework. Our modeling system demonstrates exceptionally high parallel performance combined with the physical accuracy of the modeling. The efficiency of our approach is demonstrated with illustrative mechanical test on a hypothetical carbon nanotube textile.
△ Less
Submitted 25 February, 2019;
originally announced March 2019.
