-
Simulating chiral spin liquids with fermionic Projected Entangled Paired States
Authors:
Sasank Budaraju,
Didier Poilblanc,
Sen Niu
Abstract:
Chiral Spin Liquids (CSL) based on spin-1/2 fermionic Projected Entangled Pair States (fPEPS) are considered on the square lattice. First, fPEPS approximants of Gutzwiller-projected Chern insulators (GPCI) are investigated by Variational Monte Carlo (VMC) techniques on finite size tori. We show that such fPEPS of finite bond dimension can correctly capture the topological properties of the chiral…
▽ More
Chiral Spin Liquids (CSL) based on spin-1/2 fermionic Projected Entangled Pair States (fPEPS) are considered on the square lattice. First, fPEPS approximants of Gutzwiller-projected Chern insulators (GPCI) are investigated by Variational Monte Carlo (VMC) techniques on finite size tori. We show that such fPEPS of finite bond dimension can correctly capture the topological properties of the chiral spin liquid, as the exact GPCI, with the correct topological ground state degeneracy on the torus. Further, more general fPEPS are considered and optimized (on the infinite plane) to describe the CSL phase of a chiral frustrated Heisenberg antiferromagnet. The chiral modes are computed on the edge of a semi-infinite cylinder (of finite circumference) and shown to follow the predictions from Conformal Field Theory. In contrast to their bosonic analogs the (optimized) fPEPS do not suffer from the replication of the chiral edge mode in the odd topological sector.
△ Less
Submitted 2 March, 2024;
originally announced March 2024.
-
Vibrational properties differ between halide and chalcogenide perovskite semiconductors, and it matters for optoelectronic performance
Authors:
K. Ye,
M. Menahem,
T. Salzillo,
F. Knoop,
B. Zhao,
S. Niu,
O. Hellman,
J. Ravichandran,
R. Jaramillo,
O. Yaffe
Abstract:
We report a comparative study of temperature-dependent photoluminescence and structural dynamics of two perovskite semiconductors, the chalcogenide BaZrS$_3$ (BZS) and the halide CsPbBr$_3$ (CPB). These materials have similar crystal structures and direct band gaps, but we find that they have quite distinct optoelectronic and vibrational properties. Both materials exhibit thermally-activated non-r…
▽ More
We report a comparative study of temperature-dependent photoluminescence and structural dynamics of two perovskite semiconductors, the chalcogenide BaZrS$_3$ (BZS) and the halide CsPbBr$_3$ (CPB). These materials have similar crystal structures and direct band gaps, but we find that they have quite distinct optoelectronic and vibrational properties. Both materials exhibit thermally-activated non-radiative recombination, but the non-radiative recombination rate in BZS is between two and four orders of magnitude faster than in CPB. Raman spectroscopy reveals that the effects of phonon anharmonicity are far more pronounced in CPB than in BZS. Further, although both materials feature a large dielectric response due to low-energy polar optical phonons, the phonons in CPB are substantially lower in energy than in BZS. Our results suggest that electron-phonon coupling in BZS is more effective at non-radiative recombination than in CPB, and that BZS may also have a substantially higher concentration of non-radiative recombination centers than CPB. The low defect concentration in CPB may be related to the ease of lattice reconfiguration, typified by anharmonic bonding. It remains to be seen to what extent these differences are inherent to the chalcogenide and halide perovskites and to what extent they can be affected by materials processing; comparing BZS single-crystals and thin films provides reason for optimism.
△ Less
Submitted 14 April, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Giant Modulation of Refractive Index from Picoscale Atomic Displacements
Authors:
Boyang Zhao,
Guodong Ren,
Hongyan Mei,
Vincent C. Wu,
Shantanu Singh,
Gwan-Yeong Jung,
Huandong Chen,
Raynald Giovine,
Shanyuan Niu,
Arashdeep S. Thind,
Jad Salman,
Nick S. Settineri,
Bryan C. Chakoumakos,
Michael E. Manley,
Raphael P. Hermann,
Andrew R. Lupini,
Miaofang Chi,
Jordan A. Hachtel,
Arkadiy Simonov,
Simon J. Teat,
Raphaële J. Clément,
Mikhail A. Kats,
J. Ravichandran,
Rohan Mishra
Abstract:
Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the…
▽ More
Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the refractive index tensor and resulting in the giant optical anisotropy observed in BaTiS$_3$, a quasi-one-dimensional hexagonal chalcogenide. Single crystal X-ray diffraction studies reveal the presence of antipolar displacements of Ti atoms within adjacent TiS$_6$ chains along the c-axis, and three-fold degenerate Ti displacements in the a-b plane. $^{47/49}$Ti solid-state NMR provides additional evidence for those Ti displacements in the form of a three-horned NMR lineshape resulting from a low symmetry local environment around Ti atoms. We used scanning transmission electron microscopy to directly observe the globally disordered Ti a-b plane displacements and find them to be ordered locally over a few unit cells. First-principles calculations show that the Ti a-b plane displacements selectively reduce the refractive index along the ab-plane, while having minimal impact on the refractive index along the chain direction, thus resulting in a giant enhancement in the optical anisotropy. By showing a strong connection between structural disorder with picoscale displacements and the optical response in BaTiS$_3$, this study opens a pathway for designing optical materials with high refractive index and functionalities such as large optical anisotropy and nonlinearity.
△ Less
Submitted 19 March, 2024; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Chiral spin liquids with projected Gaussian fermionic entangled pair states
Authors:
Sen Niu,
Jheng-Wei Li,
Ji-Yao Chen,
Didier Poilblanc
Abstract:
We study the parton construction of chiral spin liquids (CSLs) using projected Gaussian fermionic entangled pair states (GfPEPSs). First, we show that GfPEPSs can represent generic spinless Chern insulators faithfully with finite bond dimensions. Then, by applying the Gutzwiller projection to a bi-layer GfPEPSs, spin-1/2 Abelian and non-Abelian CSLs are obtained for Chern number $C=1$ and $C=2$, r…
▽ More
We study the parton construction of chiral spin liquids (CSLs) using projected Gaussian fermionic entangled pair states (GfPEPSs). First, we show that GfPEPSs can represent generic spinless Chern insulators faithfully with finite bond dimensions. Then, by applying the Gutzwiller projection to a bi-layer GfPEPSs, spin-1/2 Abelian and non-Abelian CSLs are obtained for Chern number $C=1$ and $C=2$, respectively. As a consequence of the topological obstruction for GfPEPSs, very weak Gossamer tails are observed in the correlation functions of the fermionic projected entangled pair state (PEPS) ansatze, suggesting that the no-go theorem for chiral PEPS is universal but does not bring any practical limitation. Remarkably, without fine tuning, all topological sectors can be constructed showing the expected number of chiral branches in the respective entanglement spectra, providing a sharp improvement with respect to the known bosonic PEPS approach.
△ Less
Submitted 17 June, 2023;
originally announced June 2023.
-
A method to measure the embedded crack length and position in high-density polyethylene using microseconds ultrasound time signal
Authors:
Sijun Niu,
Venkatsai Bellala,
Daanish A. Qureshi,
Vikas Srivastava
Abstract:
High-density polyethylene (HDPE) is used in applications ranging from cooling water pipelines in nuclear power plants and distribution pipelines for natural gas and hydrogen to biomedical implants. Embedded crack-like flaws form within HDPE during fabrication or operations. Non-visible flaws can cause catastrophic failure if undetected. Large structures such as HDPE pipelines require a fast, non-d…
▽ More
High-density polyethylene (HDPE) is used in applications ranging from cooling water pipelines in nuclear power plants and distribution pipelines for natural gas and hydrogen to biomedical implants. Embedded crack-like flaws form within HDPE during fabrication or operations. Non-visible flaws can cause catastrophic failure if undetected. Large structures such as HDPE pipelines require a fast, non-destructive evaluation (NDE) method where the sensor can move rapidly across the structure. This is only possible if the flaw is evaluated using microseconds of time signal. We propose and show the accuracy of a machine learning-based Ultrasound NDE method that can rapidly and accurately predict embedded crack length and position simultaneously in HDPE with only tens of microseconds of time signal sensing. A method to quantify crack size in HDPE and other polymers using a very short Ultrasound time signal is lacking. We propose that an optimally trained machine learning model can decipher the crack characteristics using short measures of time signal, but a lack of large, well-distributed, and labeled datasets to train machine learning models continues to be a major limitation. To overcome this limitation, we have conducted computer simulations of ultrasound on HDPE to develop training data. We show that fully simulations trained convolutional neural network (CNN) can accurately predict crack lengths and positions in HDPE from experimentally measured ultrasound A-scan microsecond signals. Our method is based on the 1D time amplitude signal acquired over a very short time period and not based on 2D image analysis. The proposed methodology presents a pathway for training CNN using computationally generated data and applying the trained CNN in the field to quantify hidden cracks in large HDPE or other polymer structures.
△ Less
Submitted 7 June, 2024; v1 submitted 22 April, 2023;
originally announced April 2023.
-
Colossal optical anisotropy from atomic-scale modulations
Authors:
Hongyan Mei,
Guodong Ren,
Boyang Zhao,
Jad Salman,
Gwan Yeong Jung,
Huandong Chen,
Shantanu Singh,
Arashdeep S. Thind,
John Cavin,
Jordan A. Hachtel,
Miaofang Chi,
Shanyuan Niu,
Graham Joe,
Chenghao Wan,
Nick Settineri,
Simon J. Teat,
Bryan C. Chakoumakos,
Jayakanth Ravichandran,
Rohan Mishra,
Mikhail A. Kats
Abstract:
In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface pol…
▽ More
In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface polaritons and hyperbolic phonon polaritons. Layered "van der Waals" materials, with strong intra-layer bonding and weak inter-layer bonding, can feature some of the largest optical anisotropy; however, their use in most optical systems is limited because their optic axis is out of the plane of the layers and the layers are weakly attached, making the anisotropy hard to access. Here, we demonstrate that a bulk crystal with subtle periodic modulations in its structure -- Sr9/8TiS3 -- is transparent and positive-uniaxial, with extraordinary index n_e = 4.5 and ordinary index n_o = 2.4 in the mid- to far-infrared. The excess Sr, compared to stoichiometric SrTiS3, results in the formation of TiS6 trigonal-prismatic units that break the infinite chains of face-shared TiS6 octahedra in SrTiS3 into periodic blocks of five TiS6 octahedral units. The additional electrons introduced by the excess Sr subsequently occupy the TiS6 octahedral blocks to form highly oriented and polarizable electron clouds, which selectively boost the extraordinary index n_e and result in record birefringence (Δn > 2.1 with low loss). The connection between subtle structural modulations and large changes in refractive index suggests new categories of anisotropic materials and also tunable optical materials with large refractive-index modulation and low optical losses.
△ Less
Submitted 21 July, 2023; v1 submitted 28 February, 2023;
originally announced March 2023.
-
Chiral spin liquids on the kagome lattice with projected entangled simplex states
Authors:
Sen Niu,
Juraj Hasik,
Ji-Yao Chen,
Didier Poilblanc
Abstract:
The infinite projected entangled simplex state (iPESS), a type of tensor network (TN) state, has been used successfully for simulating and characterizing {\it non-chiral} spin liquids on the kagome lattice. Here, we demonstrate that iPESS also provides a faithful representation of a {\it chiral} spin liquid (CSL) on the same lattice, namely the ground state of the spin-$1/2$ kagome Heisenberg anti…
▽ More
The infinite projected entangled simplex state (iPESS), a type of tensor network (TN) state, has been used successfully for simulating and characterizing {\it non-chiral} spin liquids on the kagome lattice. Here, we demonstrate that iPESS also provides a faithful representation of a {\it chiral} spin liquid (CSL) on the same lattice, namely the ground state of the spin-$1/2$ kagome Heisenberg antiferromagnet with a scalar chirality. By classifying local tensors according to SU$(2)$ and point group symmetries, we construct a chiral ansatz breaking reflection $P$ and time reversal $T$ symmetries while preserving $PT$. The variational TN states are shown to host, for bond dimension $D\ge 8$, a chiral gapless entanglement spectrum following SU$(2)_1$ conformal field theory. The correlation function shows a small weight long-range tail complying with the prediction of the TN bulk-edge correspondence. %{\color{red}With more constraints included, the chiral ansatz is reduced to a non-chiral one which preserves full point group symmetries due to an emergent {\it tensor conservation law} and is of relevance to the ground state at the Heisenberg point. Lastly, by simulations in the complete ansatz family we discuss the transition from the non-chiral spin liquid to the CSL induced by the scalar chirality term.} We identify a non-chiral manifold spanned by only a subset of symmetric tensors where a new emergent {\it tensor conservation law} is realized. This allows us to both probe the stability of the non-chiral spin liquid and discuss its transition to CSL induced by a scalar chirality term.
△ Less
Submitted 14 December, 2022; v1 submitted 9 September, 2022;
originally announced September 2022.
-
Unconventional Charge-density-wave Order in a Dilute d-band Semiconductor
Authors:
Huandong Chen,
Batyr Ilyas,
Boyang Zhao,
Emre Ergecen,
Josh Mutch,
Gwan Yeong Jung,
Qian Song,
Connor A. Occhialini,
Guodong Ren,
Sara Shabani,
Eric Seewald,
Shanyuan Niu,
Jiangbin Wu,
Nan Wang,
Mythili Surendran,
Shantanu Singh,
Jiang Luo,
Sanae Ohtomo,
Gemma Goh,
Bryan C. Chakoumakos,
Simon J. Teat,
Brent Melot,
Han Wang,
Di Xiao,
Abhay N. Pasupathy
, et al. (5 additional authors not shown)
Abstract:
Electron-lattice coupling effects in low dimensional materials give rise to charge density wave (CDW) order and phase transitions. These phenomena are critical ingredients for superconductivity and predominantly occur in metallic model systems such as doped cuprates, transition metal dichalcogenides, and more recently, in Kagome lattice materials. However, CDW in semiconducting systems, specifical…
▽ More
Electron-lattice coupling effects in low dimensional materials give rise to charge density wave (CDW) order and phase transitions. These phenomena are critical ingredients for superconductivity and predominantly occur in metallic model systems such as doped cuprates, transition metal dichalcogenides, and more recently, in Kagome lattice materials. However, CDW in semiconducting systems, specifically at the limit of low carrier concentration region, is uncommon. Here, we combine electrical transport, synchrotron X-ray diffraction and optical spectroscopy to discover CDW order in a quasi-one-dimensional (1D), dilute d-band semiconductor, BaTiS3, which suggests the existence of strong electron-phonon coupling. The CDW state further undergoes an unusual transition featuring a sharp increase in carrier mobility. Our work establishes BaTiS3 as a unique platform to study the CDW physics in the dilute filling limit to explore novel electronic phases.
△ Less
Submitted 23 July, 2022;
originally announced July 2022.
-
Static and dynamical signatures of Dzyaloshinskii-Moriya interactions in the Heisenberg model on the kagome lattice
Authors:
Francesco Ferrari,
Sen Niu,
Juraj Hasik,
Yasir Iqbal,
Didier Poilblanc,
Federico Becca
Abstract:
Motivated by recent experiments on Cs$_2$Cu$_3$SnF$_{12}$ and YCu$_{3}$(OH)$_{6}$Cl$_{3}$, we consider the ${S=1/2}$ Heisenberg model on the kagome lattice with nearest-neighbor super-exchange $J$ and (out-of-plane) Dzyaloshinskii-Moriya interaction $J_D$, which favors (in-plane) ${\bf Q}=(0,0)$ magnetic order. By using both variational Monte Carlo (based upon Gutzwiller-projected fermionic wave f…
▽ More
Motivated by recent experiments on Cs$_2$Cu$_3$SnF$_{12}$ and YCu$_{3}$(OH)$_{6}$Cl$_{3}$, we consider the ${S=1/2}$ Heisenberg model on the kagome lattice with nearest-neighbor super-exchange $J$ and (out-of-plane) Dzyaloshinskii-Moriya interaction $J_D$, which favors (in-plane) ${\bf Q}=(0,0)$ magnetic order. By using both variational Monte Carlo (based upon Gutzwiller-projected fermionic wave functions) and tensor-network approaches (built from infinite projected-entangled pair/simplex states), we show that the ground state develops a finite magnetization for $J_D/J \gtrsim 0.03 - 0.04$, while the gapless spin liquid remains stable for smaller values of the Dzyaloshinskii-Moriya interaction. The relatively small value of $J_D/J$ for which magnetic order sets in is particularly relevant for the interpretation of low-temperature behaviors of kagome antiferromagnets, including ZnCu$_{3}$(OH)$_{6}$Cl$_{2}$. In addition, we assess the spin dynamical structure factors and the corresponding low-energy spectrum, by using the variational Monte Carlo technique. The existence of a continuum of excitations above the magnon modes is reported within the magnetically ordered phase, similarly to what has been detected by inelastic neutron scattering on Cs$_{2}$Cu$_{3}$SnF$_{12}$.
△ Less
Submitted 20 February, 2023; v1 submitted 19 July, 2022;
originally announced July 2022.
-
Orientation Controlled Anisotropy in Single Crystals of Quasi-1D BaTiS3
Authors:
Boyang Zhao,
Md Shafkat Bin Hoque,
Gwan Yeong Jung,
Hongyan Mei,
Shantanu Singh,
Guodong Ren,
Milena Milich,
Qinai Zhao,
Nan Wang,
Huandong Chen,
Shanyuan Niu,
Sang-Jun Lee,
Cheng-Tai Kuo,
Jun-Sik Lee,
John A. Tomko,
Han Wang,
Mikhail Kats,
Rohan Mishra,
Patrick E Hopkins,
J. Ravichandran
Abstract:
Low-dimensional materials with chain-like (one-dimensional) or layered (twodimensional) structures are of significant interest due to their anisotropic electrical, optical, thermal properties. One material with chain-like structure, BaTiS3 (BTS), was recently shown to possess giant in-plane optical anisotropy and glass-like thermal conductivity. To understand the origin of these effects, it is nec…
▽ More
Low-dimensional materials with chain-like (one-dimensional) or layered (twodimensional) structures are of significant interest due to their anisotropic electrical, optical, thermal properties. One material with chain-like structure, BaTiS3 (BTS), was recently shown to possess giant in-plane optical anisotropy and glass-like thermal conductivity. To understand the origin of these effects, it is necessary to fully characterize the optical, thermal, and electronic anisotropy of BTS. To this end, BTS crystals with different orientations (aand c-axis orientations) were grown by chemical vapor transport. X-ray absorption spectroscopy (XAS) was used to characterize the local structure and electronic anisotropy of BTS. Fourier transform infrared (FTIR) reflection/transmission spectra show a large inplane optical anisotropy in the a-oriented crystals, while the c-axis oriented crystals were nearly isotropic in-plane. BTS platelet crystals are promising uniaxial materials for IR optics with their optic axis parallel to the c-axis. The thermal conductivity measurements revealed a thermal anisotropy of ~4.5 between the c- and a-axis. Time-domain Brillouin scattering showed that the longitudinal sound speed along the two axes is nearly the same suggesting that the thermal anisotropy is a result of different phonon scattering rates.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Cesium-involved electron transfer and electron-electron interaction in high-pressure metallic CsPbI3
Authors:
Feng Ke,
Jiejuan Yan,
Shanyuan Niu,
Jiajia Wen,
Ketao Yin,
Nathan R. Wolf,
Yan-Kai Tzeng,
Hemamala I. Karunadasa,
Young S. Lee,
Wendy L. Mao,
Yu Lin
Abstract:
Electron-phonon coupling was believed to govern the carrier transport in halide perovskites and related phases. Here we demonstrate that electron-electron interaction plays a direct and prominent role in the low-temperature electrical transport of compressed CsPbI3 and renders Fermi liquid (FL)-like behavior. By compressing δ-CsPbI3 to 80 GPa, an insulator-to-metal transition occurs, concomitant w…
▽ More
Electron-phonon coupling was believed to govern the carrier transport in halide perovskites and related phases. Here we demonstrate that electron-electron interaction plays a direct and prominent role in the low-temperature electrical transport of compressed CsPbI3 and renders Fermi liquid (FL)-like behavior. By compressing δ-CsPbI3 to 80 GPa, an insulator-to-metal transition occurs, concomitant with the completion of a sluggish structural transition from the one-dimensional (1D) Pnma (δ) phase to a 3D Pmn21 (ε) phase. Deviation from FL behavior is observed in CsPbI3 upon entering the metallic ε phase, which progressively evolves into a FL-like state at 186 GPa. First-principles density functional theory calculations reveal that the enhanced electron-electron coupling is related to the Cs-involved electron transfer and sudden increase of the 5d state occupation of the high-pressure ε phase. Our study presents a promising strategy for tuning the electronic interaction in halide perovskites for realizing intriguing electronic states.
△ Less
Submitted 2 March, 2022;
originally announced March 2022.
-
Emergent gapless topological Luttinger liquid
Authors:
Sen Niu,
Yucheng Wang,
Xiong-Jun Liu
Abstract:
Gapless Luttinger liquid is conventionally viewed as topologically trivial, unless it hosts degenerate ground states and or entanglement spectrum, which necessitates partial bulk degree of freedom to be gapped out. Here we predict an emergent gapless topological Luttinger liquid which is beyond the conventional scenarios and is characterized by the nontrivial many-body bulk spin texture, and propo…
▽ More
Gapless Luttinger liquid is conventionally viewed as topologically trivial, unless it hosts degenerate ground states and or entanglement spectrum, which necessitates partial bulk degree of freedom to be gapped out. Here we predict an emergent gapless topological Luttinger liquid which is beyond the conventional scenarios and is characterized by the nontrivial many-body bulk spin texture, and propose feasible scheme for experimental observation. We consider a one-dimensional spin-orbit coupled Fermi-Hubbard model with fractional filling, whose low-energy physics is effectively described by a spinless Luttinger liquid and is trivial in the conventional characterization. We show that, as being tuned by the filling factor and interaction strength, the many-body ground state may exhibit nontrivial winding in its bulk spin texture in the projected momentum space, manifesting an emergent topological phase. A topological transition occurs when the projected spin-state at a high symmetry momentum becomes fully mixed one, resulting from competing processes of particle scattering to the lower and higher subbands, for which the spin texture at such momentum point is ill-defined, but the Luttinger liquid keeps gapless through the transition. Surprisingly, at relatively small filling the Luttinger liquid remains topologically nontrivial even at infinitely strong interaction. The results can be generalized to finite temperature which facilitates the real experimental detection. This work shows a novel gapless topological Luttinger liquid whose characterization is beyond the low-energy effective theory, and can be verified based on current experiments.
△ Less
Submitted 26 July, 2021; v1 submitted 24 June, 2021;
originally announced June 2021.
-
Discovery of highly-polarizable semiconductors BaZrS3 and Ba3Zr2S7
Authors:
Stephen Filippone,
Boyang Zhao,
Shanyuan Niu,
Nathan Z. Koocher,
Daniel Silevitch,
Ignasi Fina,
James M. Rondinelli,
Jayakanth Ravichandran,
R. Jaramillo
Abstract:
There are few known semiconductors exhibiting both strong optical response and large dielectric polarizability. Inorganic materials with large dielectric polarizability tend to be wide-band gap complex oxides. Semiconductors with strong photoresponse to visible and infrared light tend to be weakly polarizable. Interesting exceptions to these trends are halide perovskites and phase-change chalcogen…
▽ More
There are few known semiconductors exhibiting both strong optical response and large dielectric polarizability. Inorganic materials with large dielectric polarizability tend to be wide-band gap complex oxides. Semiconductors with strong photoresponse to visible and infrared light tend to be weakly polarizable. Interesting exceptions to these trends are halide perovskites and phase-change chalcogenides. Here we introduce complex chalcogenides in the Ba-Zr-S system in perovskite and Ruddlesden-Popper structures as a new family of highly polarizable semiconductors. We report the results of impedance spectroscopy on single crystals that establish BaZrS3 and Ba3Zr2S7 as semiconductors with low-frequency relative dielectric constant ($ε_0$) in the range 50 - 100, and band gap in the range 1.3 - 1.8 eV. Our electronic structure calculations indicate the enhanced dielectric response in perovskite BaZrS3 versus Ruddlesden-Popper Ba3Zr2S7 is primarily due to enhanced IR mode-effective charges, and variations in phonon frequencies along $\langle 001 \rangle$; differences in the Born effective charges and the lattice stiffness are of secondary importance. This combination of covalent bonding in crystal structures more common to complex oxides results in a sizable Fröhlich coupling constant, which suggests that charge carriers are large polarons.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Realization of ideal Weyl semimetal band in ultracold quantum gas with 3D Spin-Orbit coupling
Authors:
Zong-Yao Wang,
Xiang-Can Cheng,
Bao-Zong Wang,
**-Yi Zhang,
Yue-Hui Lu,
Chang-Rui Yi,
Sen Niu,
You** Deng,
Xiong-Jun Liu,
Shuai Chen,
Jian-Wei Pan
Abstract:
The Weyl semimetals [1-6] are three-dimensional (3D) gapless topological phases with Weyl cones in the bulk band, and host massless quasiparticles known as Weyl fermions which were theorized by Hermann Weyl in the last twenties [7]. The lattice theory constrains that Weyl cones must come in pairs, with the minimal number of cones being two. The semimetal with only two Weyl cones is an ideal Weyl s…
▽ More
The Weyl semimetals [1-6] are three-dimensional (3D) gapless topological phases with Weyl cones in the bulk band, and host massless quasiparticles known as Weyl fermions which were theorized by Hermann Weyl in the last twenties [7]. The lattice theory constrains that Weyl cones must come in pairs, with the minimal number of cones being two. The semimetal with only two Weyl cones is an ideal Weyl semimetal (IWSM) which is the optimal platform to explore broad Weyl physics but hard to engineer in solids. Here, we report the experimental realization of the IWSM band by synthesising for the first time a 3D spin-orbit (SO) coupling for ultracold atoms. Engineering a 3D configuration-tunable optical Raman lattice [8], we realize the Weyl type SO coupling for ultracold quantum gas, with which the IWSM band is achieved with controllability. The topological Weyl points are clearly measured via the virtual slicing imaging technique [8, 9] in equilibrium, and further resolved in the quench dynamics, revealing the key information of the realized IWSM bands. The realization of the IWSM band opens an avenue to investigate various exotic phenomena based on the optimal Weyl semimetal platforms.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Realization and detection of non-ergodic critical phases in optical Raman lattice
Authors:
Yucheng Wang,
Long Zhang,
Sen Niu,
Dapeng Yu,
Xiong-Jun Liu
Abstract:
The critical phases, being delocalized but non-ergodic, are fundamental phases which are different from both the many-body localization and ergodic extended quantum phases, and have so far not been realized in experiment. Here we propose to realize such critical phases with and without interaction based on a topological optical Raman lattice scheme, which possesses one-dimensional spin-orbit coupl…
▽ More
The critical phases, being delocalized but non-ergodic, are fundamental phases which are different from both the many-body localization and ergodic extended quantum phases, and have so far not been realized in experiment. Here we propose to realize such critical phases with and without interaction based on a topological optical Raman lattice scheme, which possesses one-dimensional spin-orbit coupling and an incommensurate Zeeman potential. We demonstrate the existence of both the noninteracting and many-body critical phases, which can coexist with the topological phase, and show that the critical-localization transition coincides with the topological phase boundary in noninteracting regime. The dynamical detection of the critical phases is proposed and studied in detail. Finally, we demonstrate how the proposed critical phases can be achieved based on the current cold atom experiments. This work paves the way to observe the novel critical phases.
△ Less
Submitted 11 February, 2020; v1 submitted 30 January, 2020;
originally announced January 2020.
-
Linear Dichroism Conversion in Quasi One-Dimensional Perovskite Chalcogenide
Authors:
Jiangbin Wu,
Xin Cong,
Shanyuan Niu,
Fanxin Liu,
Huan Zhao,
Zhonghao Du,
Jayakanth Ravichandran,
**-Heng Tan,
Han Wang
Abstract:
Anisotropic photonic materials with linear dichroism are crucial components in many sensing, imaging and communication applications. Such materials play an important role as polarizers, filters and wave-plates in photonic devices and circuits. Conventional crystalline materials with optical anisotropy typically show unidirectional linear dichroism over a broad wavelength range. The linear dichrois…
▽ More
Anisotropic photonic materials with linear dichroism are crucial components in many sensing, imaging and communication applications. Such materials play an important role as polarizers, filters and wave-plates in photonic devices and circuits. Conventional crystalline materials with optical anisotropy typically show unidirectional linear dichroism over a broad wavelength range. The linear dichroism conversion phenomenon has not been observed in crystalline materials. Here, we report the investigation of the unique linear dichroism conversion phenomenon in quasi-one-dimensional (quasi-1D) hexagonal perovskite chalcogenide BaTiS3. The material shows record level of optical anisotropy within the visible wavelength range. In contrast to conventional anisotropic optical materials, the linear dichroism polarity in BaTiS3 makes an orthogonal change at an optical wavelength corresponding to the photon energy of 1.78 eV. First principle calculations reveal that this anomalous linear dichroism conversion behavior originates from different selection rules of the optical transitions from the parallel bands in the BaTiS3 material. Wavelength dependent polarized Raman spectroscopy further confirms this phenomenon. Such material with linear dichroism conversion property can facilitate new ability to control and sense the energy and polarization of light, and lead to novel photonic devices such as polarization-wavelength selective detectors and lasers for multispectral imaging, sensing and optical communication applications.
△ Less
Submitted 27 May, 2019; v1 submitted 23 May, 2019;
originally announced May 2019.
-
Band gap evolution in Ruddlesden-Popper phases
Authors:
Wei Li,
Shanyuan Niu,
Boyang Zhao,
Ralf Haiges,
Jayakanth Ravichandran,
Anderson Janotti
Abstract:
We investigate the variation of the band gap across the Ruddlesden-Popper (RP) series (An+1BnX3n+1) in model chalcogenide, oxide, and halide materials to understand the factors influencing band gap evolution. In contrast to the oxides and halides, we find the band gap of the chalcogenides evolve differently with the thickness of the perovskite blocks in these natural superlattices. We show that oc…
▽ More
We investigate the variation of the band gap across the Ruddlesden-Popper (RP) series (An+1BnX3n+1) in model chalcogenide, oxide, and halide materials to understand the factors influencing band gap evolution. In contrast to the oxides and halides, we find the band gap of the chalcogenides evolve differently with the thickness of the perovskite blocks in these natural superlattices. We show that octahedral rotations (i.e. deviation of the B-X-B bond angles from 180) and quantum confinement effects compete to decide the band gap evolution of RP phases. The insights gained here will allow us to rationally design layered perovskite phases for electronics and optoelectronics.
△ Less
Submitted 7 May, 2019;
originally announced May 2019.
-
Crystal growth and structural analysis of perovskite chalcogenide BaZrS$_3$ and Ruddlesden-Popper phase Ba$_3$Zr$_2$S$_7$
Authors:
Shanyuan Niu,
Boyang Zhao,
Kevin Ye,
Elisabeth Bianco,
Jieyang Zhou,
Michael E. McConney,
Charles Settens,
Ralf Haiges,
R. Jaramillo,
Jayakanth Ravichandran
Abstract:
Perovskite chalcogenides are gaining substantial interest as an emerging class of semiconductors for optoelectronic applications. High quality samples are of vital importance to examine their inherent physical properties. We report the successful crystal growth of the model system, BaZrS$_3$ and its Ruddlesden-Popper phase Ba$_3$Zr$_2$S$_7$ by flux method. X-ray diffraction analyses showed space g…
▽ More
Perovskite chalcogenides are gaining substantial interest as an emerging class of semiconductors for optoelectronic applications. High quality samples are of vital importance to examine their inherent physical properties. We report the successful crystal growth of the model system, BaZrS$_3$ and its Ruddlesden-Popper phase Ba$_3$Zr$_2$S$_7$ by flux method. X-ray diffraction analyses showed space group of $Pnma$ with lattice constants of $a$ = 7.056(3) Å\/, $b$ = 9.962(4) Å\/, $c$ = 6.996(3) Å\/ for BaZrS$_3$ and $P4_2/mnm$ with $a$ = 7.071(2) Å\/, $b$ = 7.071(2) Å\/, $c$ = 25.418(5) Å\/ for Ba$_3$Zr$_2$S$_7$. Rocking curves with full-width-at-half-maximum of 0.011$^\circ$ for BaZrS$_3$ and 0.027$^\circ$ for Ba$_3$Zr$_2$S$_7$ were observed. Pole figure analysis, scanning transmission electron microscopy images and electron diffraction patterns also establish high quality of grown crystals. The octahedra tilting in the corner-sharing octahedra network are analyzed by extracting the torsion angles.
△ Less
Submitted 12 September, 2019; v1 submitted 25 April, 2019;
originally announced April 2019.
-
Emergent topology and symmetry-breaking order in correlated quench dynamics
Authors:
Long Zhang,
Lin Zhang,
Ying Hu,
Sen Niu,
Xiong-Jun Liu
Abstract:
Quenching a quantum system involves three basic ingredients: the initial phase, the post-quench target phase, and the non-equilibrium dynamics which carries the information of the former two. Here we propose a dynamical theory to characterize both the topology and symmetry-breaking order in correlated quantum system, through quenching the Haldane-Hubbard model from an initial magnetic phase to top…
▽ More
Quenching a quantum system involves three basic ingredients: the initial phase, the post-quench target phase, and the non-equilibrium dynamics which carries the information of the former two. Here we propose a dynamical theory to characterize both the topology and symmetry-breaking order in correlated quantum system, through quenching the Haldane-Hubbard model from an initial magnetic phase to topologically nontrivial regime. The equation of motion for the complex pseudospin dynamics is obtained with the flow equation method, with the pseudospin evolution shown to obey a microscopic Landau-Lifshitz-Gilbert-Bloch equation. We find that the correlated quench dynamics exhibit robust universal behaviors on the so-called band-inversion surfaces (BISs), from which the nontrivial topology and magnetic order can be extracted. In particular, the topology of the post-quench regime can be characterized by an emergent dynamical topological pattern of quench dynamics on BISs, which is robust against dephasing and heating induced by interactions; the pre-quench symmetry-breaking orders is read out from a universal scaling behavior of the quench dynamics emerging on the BIS, which is valid beyond the mean-field regime. This work opens a way to characterize both the topology and symmetry-breaking orders by correlated quench dynamics.
△ Less
Submitted 31 July, 2019; v1 submitted 21 March, 2019;
originally announced March 2019.
-
Epitaxial Growth and Electrical Properties of VO2 on LSAT (111) substrate
Authors:
Yang Liu,
Shanyuan Niu,
Thomas Orvis,
Haimang Zhang,
Han Wang,
Jayakanth Ravichandran
Abstract:
We report the epitaxial growth and the electrical properties, especially the metal-to-insulator transition (MIT), of vanadium dioxide (VO2) thin films synthesized on LSAT (111) ([LaAlO3]0.3[Sr2AlTaO6]0.7) substrates by pulsed laser deposition. X-ray diffraction studies show that the epitaxial relationship between the VO2 thin films and LSAT substrate is given as VO2(020)||LSAT(111) and VO2[001]||L…
▽ More
We report the epitaxial growth and the electrical properties, especially the metal-to-insulator transition (MIT), of vanadium dioxide (VO2) thin films synthesized on LSAT (111) ([LaAlO3]0.3[Sr2AlTaO6]0.7) substrates by pulsed laser deposition. X-ray diffraction studies show that the epitaxial relationship between the VO2 thin films and LSAT substrate is given as VO2(020)||LSAT(111) and VO2[001]||LSAT[11-2]. We observed a sharp four orders of magnitude change in the longitudinal resistance for the VO2 thin films around the transition temperature. We also measured distinct Raman spectra below and above the transition point indicating a concomitant structural transition between the insulator and metallic phases, in agreement with past investigations.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
-
Observation of nodal-line semimetal with ultracold fermions in an optical lattice
Authors:
Bo Song,
Chengdong He,
Sen Niu,
Long Zhang,
Zejian Ren,
Xiong-Jun Liu,
Gyu-Boong Jo
Abstract:
Observation of topological phases beyond two-dimension (2D) has been an open challenge for ultracold atoms. Here, we realize for the first time a 3D spin-orbit coupled nodal-line semimetal in an optical lattice and observe the bulk line nodes with ultracold fermions. The realized topological semimetal exhibits an emergent magnetic group symmetry. This allows to detect the nodal lines by effectivel…
▽ More
Observation of topological phases beyond two-dimension (2D) has been an open challenge for ultracold atoms. Here, we realize for the first time a 3D spin-orbit coupled nodal-line semimetal in an optical lattice and observe the bulk line nodes with ultracold fermions. The realized topological semimetal exhibits an emergent magnetic group symmetry. This allows to detect the nodal lines by effectively reconstructing the 3D topological band from a series of measurements of integrated spin textures, which precisely render spin textures on the parameter-tuned magnetic-group-symmetric planes. The detection technique can be generally applied to explore 3D topological states of similar symmetries. Furthermore, we observe the band inversion lines from topological quench dynamics, which are bulk counterparts of Fermi arc states and connect the Dirac points, reconfirming the realized topological band. Our results demonstrate the first approach to effectively observe 3D band topology, and open the way to probe exotic topological physics for ultracold atoms in high dimensions.
△ Less
Submitted 6 May, 2019; v1 submitted 22 August, 2018;
originally announced August 2018.
-
Thermal Stability Study of Transition Metal Perovskite Sulfides
Authors:
Shanyuan Niu,
JoAnna Milam-Guerrero,
Yucheng Zhou,
Kevin Ye,
Boyang Zhao,
Brent C. Melot,
Jayakanth Ravichandran
Abstract:
Transition metal perovskite chalcogenides, a class of materials with rich tunability in functionalities, are gaining increased attention as candidate materials for renewable energy applications. Perovskite oxides are considered excellent n-type thermoelectric materials. Compared to oxide counterparts, we expect the chalcogenides to possess more favorable thermoelectric properties such as lower lat…
▽ More
Transition metal perovskite chalcogenides, a class of materials with rich tunability in functionalities, are gaining increased attention as candidate materials for renewable energy applications. Perovskite oxides are considered excellent n-type thermoelectric materials. Compared to oxide counterparts, we expect the chalcogenides to possess more favorable thermoelectric properties such as lower lattice thermal conductivity and smaller band gap, making them promising material candidates for high temperature thermoelectrics. Thus, it is necessary to study the thermal properties of these materials in detail, especially thermal stability, to evaluate their potential. In this work, we report the synthesis and thermal stability study of five compounds, α-SrZrS$_3$, β-SrZrS$_3$, BaZrS$_3$, Ba$_2$ZrS$_4$, and Ba$_3$Zr$_2$S$_7$. These materials cover several structural types including distorted perovskite, needle-like, and Ruddlesden-Popper phases. Differential scanning calorimeter and thermo-gravimetric analysis measurements were performed up to 1200°C in air. Structural and chemical characterizations such as X-ray diffraction, Raman spectroscopy, and energy dispersive analytical X-ray spectroscopy were performed on all the samples before and after the heat treatment to understand the oxidation process. Our studies show that perovskite chalcogenides possess excellent thermal stability in air at least up to 600°C.
△ Less
Submitted 9 July, 2018;
originally announced July 2018.
-
Mid-wave and Long-wave IR Linear Dichroism in a Hexagonal Perovskite Chalcogenide
Authors:
Shanyuan Niu,
Huan Zhao,
Yucheng Zhou,
Huaixun Huyan,
Boyang Zhao,
Jiangbin Wu,
Stephen B. Cronin,
Han Wang,
Jayakanth Ravichandran
Abstract:
Mid-wave infrared (IR) and long-wave IR spectral ranges are of growing interest in various applications such as thermal imaging, thermography-based remote sensing, and night vision. Materials widely used for IR photodetectors in this regime include cadmium mercury telluride alloys and nanostructures of compound semiconductor. The materials development for IR optics will drive down the cost of IR o…
▽ More
Mid-wave infrared (IR) and long-wave IR spectral ranges are of growing interest in various applications such as thermal imaging, thermography-based remote sensing, and night vision. Materials widely used for IR photodetectors in this regime include cadmium mercury telluride alloys and nanostructures of compound semiconductor. The materials development for IR optics will drive down the cost of IR optical systems and enable larger scale deployment. Here, we report a mid-wave IR responsive material composed of earth abundant and non-toxic elements, Sr1+xTiS3. It has a highly anisotropic quasi-one-dimensional structure similar to hexagonal perovskites. We grew large, high quality single crystals and studied its anisotropic optical properties. We observed two distinct optical absorption edges at ~2.5 um and ~5 um, respectively, for linear polarizations along two principal axes. The material demonstrated strong and broadband linear dichroism spanning mid-wave IR and long-wave IR, with a dichroitic ratio of up to 22.
△ Less
Submitted 25 June, 2018;
originally announced June 2018.
-
Ideal Bandgap in a 2D Ruddlesden-Popper Perovskite Chalcogenide for Single-junction Solar Cells
Authors:
Shanyuan Niu,
Debarghya Sarkar,
Kristopher Williams,
Yucheng Zhou,
Yuwei Li,
Elisabeth Bianco,
Huaixun Huyan,
Stephen B. Cronin,
Michael E. McConney,
Ralf Haiges,
R. Jaramillo,
David J. Singh,
William A. Tisdale,
Rehan Kapadia,
Jayakanth Ravichandran
Abstract:
Transition metal perovskite chalcogenides (TMPCs) are explored as stable, environmentally friendly semiconductors for solar energy conversion. They can be viewed as the inorganic alternatives to hybrid halide perovskites, and chalcogenide counterparts of perovskite oxides with desirable optoelectronic properties in the visible and infrared part of the electromagnetic spectrum. Past theoretical stu…
▽ More
Transition metal perovskite chalcogenides (TMPCs) are explored as stable, environmentally friendly semiconductors for solar energy conversion. They can be viewed as the inorganic alternatives to hybrid halide perovskites, and chalcogenide counterparts of perovskite oxides with desirable optoelectronic properties in the visible and infrared part of the electromagnetic spectrum. Past theoretical studies have predicted large absorption coefficient, desirable defect characteristics, and bulk photovoltaic effect in TMPCs. Despite recent progresses in polycrystalline synthesis and measurements of their optical properties, it is necessary to grow these materials in high crystalline quality to develop a fundamental understanding of their optical properties and evaluate their suitability for photovoltaic application. Here, we report the growth of single crystals of a two-dimensional (2D) perovskite chalcogenide, Ba3Zr2S7, with a natural superlattice-like structure of alternating double-layer perovskite blocks and single-layer rock salt structure. The material demonstrated a bright photoluminescence peak at 1.28 eV with a large external luminescence efficiency of up to 0.15%. We performed time-resolved photoluminescence spectroscopy on these crystals and obtained an effective recombination time of ~65 ns. These results clearly show that 2D Ruddlesden-Popper phases of perovskite chalcogenides are promising materials to achieve single-junction solar cells.
△ Less
Submitted 25 June, 2018;
originally announced June 2018.
-
Ultrabroadband photosensitivity from visible to terahertz at room temperature
Authors:
Dong Wu,
Y. C. Ma,
Y. Y. Niu,
Q. M. Liu,
Tao Dong,
S. J. Zhang,
J. S. Niu,
H. B. Zhou,
Jian Wei,
Y. X. Wang,
Z. R. Zhao,
N. L. Wang
Abstract:
Charge-density wave (CDW) is one of the most fundamental quantum phenomena in solids. Different from ordinary metals in which only single particle excitations exist, CDW also has collective excitations and can carry electric current in a collective fashion. Manipulating this collective condensation for applications has long been a goal in the condensed matter and materials community. Here we show…
▽ More
Charge-density wave (CDW) is one of the most fundamental quantum phenomena in solids. Different from ordinary metals in which only single particle excitations exist, CDW also has collective excitations and can carry electric current in a collective fashion. Manipulating this collective condensation for applications has long been a goal in the condensed matter and materials community. Here we show that the CDW system of 1T-TaS2 is highly sensitive to light directly from visible down to terahertz, with current responsivities around the order of ~1 AW-1 at room temperature. Our findings open a new avenue for realizing uncooled, ultrabroadband and sensitive photoelectronics continuously down to terahertz spectral range.
△ Less
Submitted 23 June, 2018;
originally announced June 2018.
-
Simple and accurate model of fracture toughness of solids
Authors:
Haiyang Niu,
Shiwei Niu,
Artem R. Oganov
Abstract:
Fracture toughness $K_{IC}$ plays an important role in materials design. Along with numerous experimental methods to measure fracture toughness of materials, its understanding and theoretical prediction is very important. However, theoretical prediction of fracture toughness is challenging. By investigating the correlation between fracture toughness and elastic properties of materials, we have con…
▽ More
Fracture toughness $K_{IC}$ plays an important role in materials design. Along with numerous experimental methods to measure fracture toughness of materials, its understanding and theoretical prediction is very important. However, theoretical prediction of fracture toughness is challenging. By investigating the correlation between fracture toughness and elastic properties of materials, we have constructed a fracture toughness model for covalent and ionic crystals. Furthermore, by introducing an enhancement factor, which is determined by the density of states at the Fermi level and atomic electronegativities, we have constructed a universal model of fracture toughness for covalent and ionic crystals, metals and intermetallics. The predicted fracture toughnesses are in good agreement with experimental values for a series of materials. All the parameters in the proposed model of fracture toughness can be obtained from first-principles calculations, which makes it suitable for practical applications.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
Magnetic effects on Chern Kondo insulator
Authors:
Sen Niu,
Xiong-Jun Liu
Abstract:
We examine the Chern Kondo insulator proposed in a square optical lattice with staggered flux induced by $s$-$p$ orbital hybridization by revisiting its realization and taking into account the magnetic effects for the Kondo phases. The Ruderman-Kittel-Kasuya-Yoshida interaction is analyzed at the weak $s$-$p$ hybridization regime, with the anisotropic magnetic effects being discussed. Furthermore,…
▽ More
We examine the Chern Kondo insulator proposed in a square optical lattice with staggered flux induced by $s$-$p$ orbital hybridization by revisiting its realization and taking into account the magnetic effects for the Kondo phases. The Ruderman-Kittel-Kasuya-Yoshida interaction is analyzed at the weak $s$-$p$ hybridization regime, with the anisotropic magnetic effects being discussed. Furthermore, the paramagnetic and magnetic phases coexisting with Kondo couplings are systematically investigated through the slave-boson theory, for which the rich phases are obtained, including the antiferromagnetic, collinear antiferromagnetic Kondo insulator, and Kondo metal phases. The magnetic orders are shown to enhance the effective Kondo hybridization compared with the case without taking into account magnetic effects, and exhibit different influences on the bulk topology. In particular, the antiferromagnetic order always enhances the topological phase by increasing bulk gap of the Chern Kondo phases. The results show the rich topological and magnetic effects obtained in the present Chern Kondo lattice model. We also investigate how to identify the topology and strong correlation effects through measuring the Hall conductance and double occupancy, which are achievable in ultracold atom experiments.
△ Less
Submitted 15 May, 2018; v1 submitted 3 May, 2018;
originally announced May 2018.
-
Band-Gap Control via Structural and Chemical Tuning of Transition Metal Perovskite Chalcogenides
Authors:
Shanyuan Niu,
Huaixun Huyan,
Yang Liu,
Matthew Yeung,
Kevin Ye,
Louis Blankemeier,
Thomas Orvis,
Debarghya Sarkar,
David J. Singh,
Rehan Kapadia,
Jayakanth Ravichandran
Abstract:
Transition metal perovskite chalcogenides (TMPC) are a new class of semiconductor materials with broad tunability of physical properties due to their chemical and structural flexibility. Theoretical calculations show that band gaps of TMPCs are tunable from Far IR to UV spectrum. Amongst these materials, more than a handful of materials have energy gap and very high absorption coefficients, which…
▽ More
Transition metal perovskite chalcogenides (TMPC) are a new class of semiconductor materials with broad tunability of physical properties due to their chemical and structural flexibility. Theoretical calculations show that band gaps of TMPCs are tunable from Far IR to UV spectrum. Amongst these materials, more than a handful of materials have energy gap and very high absorption coefficients, which are appropriate for optoelectronic applications, especially solar energy conversion. Despite several promising theoretical predictions, very little experimental studies on their physical properties are currently available, especially optical properties. We report a new synthetic route towards high quality bulk ceramic TMPCs and systematic study of three phases, SrZrS3 in two different room temperature stabilized phases and one of BaZrS3. All three materials were synthesized with a catalyzed solid-state reaction process in sealed ampoules. Structural and chemical characterizations establish high quality of the samples, which is confirmed by the intense room temperature photoluminescence (PL) spectra showing direct band gaps around 1.53eV, 2.13eV and 1.81eV respectively. The potential of these materials for solar energy conversion was evaluated by measurement of PL quantum efficiency and estimate of quasi Fermi level splitting.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Dynamical classification of topological quantum phases
Authors:
Lin Zhang,
Long Zhang,
Sen Niu,
Xiong-Jun Liu
Abstract:
Topological phase of matter is now a mainstream of research in condensed matter physics, of which the classification, synthesis, and detection of topological states have brought excitements over the recent decade while remain incomplete with ongoing challenges in both theory and experiment. Here we propose to establish a universal dynamical characterization of the topological quantum phases classi…
▽ More
Topological phase of matter is now a mainstream of research in condensed matter physics, of which the classification, synthesis, and detection of topological states have brought excitements over the recent decade while remain incomplete with ongoing challenges in both theory and experiment. Here we propose to establish a universal dynamical characterization of the topological quantum phases classified by integers, and further propose the high-precision dynamical schemes to detect such states. The framework of {the dynamical classification theory} consists of basic theorems. First, we uncover that classifying a $d$-dimensional ($d$D) gapped topological phase {of generic multibands} can reduce to a ($d-1$)D invariant defined on so-called band inversion surfaces (BISs), rendering a {\it bulk-surface duality} which simplifies the topological characterization. Further, we show in quenching across phase boundary the (pseudo)spin dynamics to exhibit unique topological patterns on BISs, which are attributed to the post-quench bulk topology and manifest a {\it dynamical bulk-surface correspondence}. For this the topological phase is classified by a dynamical topological invariant measured from dynamical spin-texture field on the BISs. Applications to quenching experiments on feasible models are proposed and studied, demonstrating the new experimental strategies to detect topological phases with high feasibility. This work opens a broad new direction to classify and detect topological phases by quantum dynamics.
△ Less
Submitted 25 August, 2018; v1 submitted 27 February, 2018;
originally announced February 2018.