-
Orbital diffusion, polarization and swap** in centrosymmetric metals
Authors:
Xiaobai Ning,
A. Pezo,
Kyoung-Whan Kim,
Weisheng Zhao,
Kyung-** Lee,
Aurelien Manchon
Abstract:
We propose a general theory of charge, spin, and orbital diffusion based on Keldysh formalism. Our findings indicate that the diffusivity of orbital angular momentum in metals is much lower than that of spin or charge due to the strong orbital intermixing in crystals. Furthermore, our theory introduces the concept of spin-orbit polarization by which a pure orbital (spin) current induces a longitud…
▽ More
We propose a general theory of charge, spin, and orbital diffusion based on Keldysh formalism. Our findings indicate that the diffusivity of orbital angular momentum in metals is much lower than that of spin or charge due to the strong orbital intermixing in crystals. Furthermore, our theory introduces the concept of spin-orbit polarization by which a pure orbital (spin) current induces a longitudinal spin (orbital) current, a process as efficient as spin polarization in ferromagnets. Finally, we find that orbital currents undergo momentum swap**, even in the absence of spin-orbit coupling. This theory establishes several key parameters for orbital transport of direct importance to experiments.
△ Less
Submitted 24 June, 2024; v1 submitted 7 October, 2023;
originally announced October 2023.
-
Giant orbit-to-charge conversion induced via the inverse orbital Hall effect
Authors:
Renyou Xu,
Hui Zhang,
Yuhao Jiang,
Houyi Cheng,
Yunfei Xie,
Yuxuan Yao,
Danrong Xiong,
Zhaozhao Zhu,
Xiaobai Ning,
Runze Chen,
Yan Huang,
Shijie Xu,
Jianwang Cai,
Yong Xu,
Tao Liu,
Weisheng Zhao
Abstract:
We investigate the orbit-to-charge conversion in YIG/Pt/nonmagnetic material (NM) trilayer heterostructures. With the additional Ru layer on the top of YIG/Pt stacks, the charge current signal increases nearly an order of magnitude in both longitudinal spin Seebeck effect (SSE) and spin pum** (SP) measurements. Through thickness dependence studies of the Ru metal layer and theoretical model, we…
▽ More
We investigate the orbit-to-charge conversion in YIG/Pt/nonmagnetic material (NM) trilayer heterostructures. With the additional Ru layer on the top of YIG/Pt stacks, the charge current signal increases nearly an order of magnitude in both longitudinal spin Seebeck effect (SSE) and spin pum** (SP) measurements. Through thickness dependence studies of the Ru metal layer and theoretical model, we quantitatively clarify different contributions of the increased SSE signal that mainly comes from the inverse orbital Hall effect (IOHE) of Ru, and partially comes from the orbital sink effect in the Ru layer. A similar enhancement of SSE(SP) signals is also observed when Ru is replaced by other materials (Ta, W, and Cu), implying the universality of the IOHE in transition metals. Our findings not only suggest a more efficient generation of the charge current via the orbital angular moment channel but also provides crucial insights into the interplay among charge, spin, and orbit.
△ Less
Submitted 24 August, 2023;
originally announced August 2023.
-
Equation of state for tungsten predicted by ensemble theory
Authors:
Yue-Yue Tian,
Bo-Yuan Ning,
X. -D. Xiang,
Hui-Fen Zhang,
Xi-**g Ning
Abstract:
Equation of state (EOS) for bcc tungsten at 300 K (or 3000 K) up to 1000 GPa (or 300 GPa) was predicted for the first time by solving the partition function via a direct integral approach (DIA) with ab initio calculations of the atoms' interactions. Compared with available experiments under static compressions up to 150 GPa (or 35 GPa) for room temperature (or 1673 K), all the calculated results a…
▽ More
Equation of state (EOS) for bcc tungsten at 300 K (or 3000 K) up to 1000 GPa (or 300 GPa) was predicted for the first time by solving the partition function via a direct integral approach (DIA) with ab initio calculations of the atoms' interactions. Compared with available experiments under static compressions up to 150 GPa (or 35 GPa) for room temperature (or 1673 K), all the calculated results are within the experimental uncertainty achieved very recently. Furthermore, the same procedure was performed to investigate the shock wave experiments on the EOS up to 400 GPa and 10000 K, and the calculated average pressure deviates the experimental measurements by only 2.0%. These facts suggest that the other calculated results of DIA for the EOS are reliable, and DIA as a universal method without any artificial parameters could be widely applied to predict EOS of various materials under various conditions.
△ Less
Submitted 1 November, 2022; v1 submitted 29 October, 2022;
originally announced October 2022.
-
Observation of magnetism induced topological edge state in antiferromagnetic topological insulator MnBi4Te7
Authors:
HaoKe Xu,
Mingqiang Gu,
Fucong Fei,
YiSheng Gu,
Dang Liu,
QiaoYan Yu,
ShaSha Xue,
XuHui Ning,
Bo Chen,
Hangkai Xie,
Zhen Zhu,
Dandan Guan,
Shiyong Wang,
Yaoyi Li,
Canhua Liu,
Qihang Liu,
Fengqi Song,
Hao Zheng,
**feng Jia
Abstract:
Breaking time reversal symmetry in a topological insulator may lead to quantum anomalous Hall effect and axion insulator phase. MnBi4Te7 is a recently discovered antiferromagnetic topological insulator with TN ~12.5 K, which is constituted of alternatively stacked magnetic layer (MnBi2Te4) and non-magnetic layer (Bi2Te3). By means of scanning tunneling spectroscopy, we clearly observe the electron…
▽ More
Breaking time reversal symmetry in a topological insulator may lead to quantum anomalous Hall effect and axion insulator phase. MnBi4Te7 is a recently discovered antiferromagnetic topological insulator with TN ~12.5 K, which is constituted of alternatively stacked magnetic layer (MnBi2Te4) and non-magnetic layer (Bi2Te3). By means of scanning tunneling spectroscopy, we clearly observe the electronic state present at a step edge of a magnetic MnBi2Te4 layer but absent at non-magnetic Bi2Te3 layers at 4.5 K. Furthermore, we find that as the temperature rises above TN, the edge state vanishes, while the point defect induced state persists upon temperature increasing. These results confirm the observation of magnetism induced edge states. Our analysis based on an axion insulator theory reveals that the nontrivial topological nature of the observed edge state.
△ Less
Submitted 16 July, 2022;
originally announced July 2022.
-
Pressure-induced structural phase transition of vanadium: A revisit from the perspective of ensemble theory
Authors:
Bo-Yuan Ning,
Xi-**g Ning
Abstract:
For realistic crystals, the free energy strictly formulated in ensemble theory can hardly be obtained because of the difficulty in solving the high-dimension integral of the partition function, the dilemma of which makes it even a doubt if the rigorous ensemble theory is applicable to phase transitions of condensed matters. In the present work, the partition function of crystal vanadium under comp…
▽ More
For realistic crystals, the free energy strictly formulated in ensemble theory can hardly be obtained because of the difficulty in solving the high-dimension integral of the partition function, the dilemma of which makes it even a doubt if the rigorous ensemble theory is applicable to phase transitions of condensed matters. In the present work, the partition function of crystal vanadium under compression up to $320$ GPa at room temperature is solved by an approach developed very recently, and the derived equation of state is in a good agreement with all the experimental measurements, especially the latest one covering the widest pressure range up to $300$ GPa. Furthermore, the derived Gibbs free energy proves the very argument to understand most of the experiments reported in the past decade on the pressure-induced phase transition, and, especially, a novel phase transition sequence concerning three different phases observed very recently and the measured angles of two phases agree with our theoretical results excellently.
△ Less
Submitted 3 March, 2022;
originally announced March 2022.
-
Effect of Branching on Phase Behaviors of ABC Triblock Copolymers in Nonfrustrated Systems
Authors:
Danyang Chen,
Xiaowei Ning
Abstract:
The phase behavior of linear dendritic triblock copolymer melts(AB2C4) is studied by self-consistent-field theory (SCFT) in order to find the effects of branching on the phase behavior of ABC linear triblock copolymer melts. We focus on a nonfrustrated parameters that \c{hi}NAB=\c{hi}NBC=\c{hi}NAC=40 where A/C interface will not form. Frank-Kasper phases, asymmetric alternative sphere as well as t…
▽ More
The phase behavior of linear dendritic triblock copolymer melts(AB2C4) is studied by self-consistent-field theory (SCFT) in order to find the effects of branching on the phase behavior of ABC linear triblock copolymer melts. We focus on a nonfrustrated parameters that \c{hi}NAB=\c{hi}NBC=\c{hi}NAC=40 where A/C interface will not form. Frank-Kasper phases, asymmetric alternative sphere as well as traditional phases observed in diblock copolymer melts are found to be stable in the calculation.
△ Less
Submitted 15 September, 2023; v1 submitted 28 September, 2019;
originally announced September 2019.
-
Polarity and spin-orbit coupling induced large interfacial exchange coupling an asymmetric charge transfer in iridate-manganite heterostructure
Authors:
Tao Yu,
Bei Deng,
Liang Zhou,
**bo Chen,
Qiying Liu,
Xingkun Ning,
**gtian Zhou,
Zhi** Bian,
Zhenlin Luo,
Chunyin Qiu,
Xingqing Shi,
Hongtao He
Abstract:
Charge transfer is of particular importance in manipulating the interface physics in transition-metal oxide heterostructures. In this work, we have fabricated epitaxial bilayers composed of polar 3d LaMnO3 and nonpolar 5d SrIrO3. Systematic magnetic measurements reveal an unexpectedly large exchange bias effect in the bilayer, together with a dramatic enhancement of the coercivity of LaMnO3. Based…
▽ More
Charge transfer is of particular importance in manipulating the interface physics in transition-metal oxide heterostructures. In this work, we have fabricated epitaxial bilayers composed of polar 3d LaMnO3 and nonpolar 5d SrIrO3. Systematic magnetic measurements reveal an unexpectedly large exchange bias effect in the bilayer, together with a dramatic enhancement of the coercivity of LaMnO3. Based on first-principles calculations and x-ray absorption spectroscopy measurements, such a strong interfacial magnetic coupling is found closely associated with the polar nature of LaMnO3 and the strong spin-orbit interaction in SrIrO3, which collectively drives an asymmetric interfacial charge transfer and leads to the emergence of an interfacial spin glass state. Our study provides new insight into the charge transfer in transition-metal oxide heterostructures and offers a novel means to tune the interfacial exchange coupling for a variety of device applications.
△ Less
Submitted 11 April, 2019; v1 submitted 7 April, 2019;
originally announced April 2019.
-
What retards the response of graphene based gaseous sensor
Authors:
Hui-Fen Zhang,
Bo-Yuan Ning,
Tsu-Chien Weng,
Dong-** Wu,
Xi-**g Ning
Abstract:
Graphene based sensor to gas molecules should be ultrasensitive and ultrafast because of the single-atomic thickness of graphene, while the response is not fast. Usually, the measured response time for many molecules, such as CO, NH3, SO2, CO2 and NO2 and so on, is on the scale of minutes or longer. In the present work, we found via \emph{ab initio} calculations there exists a potential barrier la…
▽ More
Graphene based sensor to gas molecules should be ultrasensitive and ultrafast because of the single-atomic thickness of graphene, while the response is not fast. Usually, the measured response time for many molecules, such as CO, NH3, SO2, CO2 and NO2 and so on, is on the scale of minutes or longer. In the present work, we found via \emph{ab initio} calculations there exists a potential barrier larger than 0.7 eV that hinders the gas molecule to land directly at the defective sites of graphene and retards the response. An efficient approach to the problem is suggested as modifying the graphene sheet with other molecules to reduce the potential barrier and was demonstrated by a graphene sheet modified by Fe2O3 molecules that shows fast response to H2S molecule, and the calculated response time is close to the measured one, 500 $μ$s.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Comparison of two efficient methods for calculating partition functions
Authors:
Le-Cheng Gong,
Bo-Yuan Ning,
Tsu-Chien Weng,
Xi-**g Ning
Abstract:
In the long-time pursuit of the solution to calculate the partition function (or free energy) of condensed matter, Monte-Carlo-based nested sampling should be the state-of-the-art method, and very recently, we established a direct integral approach that works at least four orders faster. In present work, the above two methods were applied to solid argon at temperatures up to $300$K, and the derive…
▽ More
In the long-time pursuit of the solution to calculate the partition function (or free energy) of condensed matter, Monte-Carlo-based nested sampling should be the state-of-the-art method, and very recently, we established a direct integral approach that works at least four orders faster. In present work, the above two methods were applied to solid argon at temperatures up to $300$K, and the derived internal energy and pressure were compared with the molecular dynamics simulation as well as experimental measurements, showing that the calculation precision of our approach is about 10 times higher than that of the nested sampling method.
△ Less
Submitted 19 February, 2019;
originally announced February 2019.
-
Searching for the optimum conditions for silicene growth by calculations of the free energy
Authors:
Yu-Peng Liu,
Bo-Yuan Ning,
Le-Cheng Gong,
Tsu-Chien Weng,
Xi-**g Ning
Abstract:
Very recently we developed an efficient method to calculate the free energy of 2D materials on substrates and achieved high calculation precision for graphene or $γ$-graphyne on copper substrates. In the present work, the method was further confirmed to be accurate by molecular dynamic simulations of silicene on Ag substrate using empirical potential and was applied to predict the optimum conditio…
▽ More
Very recently we developed an efficient method to calculate the free energy of 2D materials on substrates and achieved high calculation precision for graphene or $γ$-graphyne on copper substrates. In the present work, the method was further confirmed to be accurate by molecular dynamic simulations of silicene on Ag substrate using empirical potential and was applied to predict the optimum conditions based on \emph{ab initio} calculations for silicene growth on Ag (110) and Ag (111) surface, which are in good agreement with previous experimental observations.
△ Less
Submitted 17 February, 2019;
originally announced February 2019.
-
Calculating the free energy of 2D materials on substrates
Authors:
Yu-Peng Liu,
Bo-Yuan Ning,
Le-Cheng Gong,
Tsu-Chien Weng,
Xi-**g Ning
Abstract:
A method was developed to calculate the free energy of 2D materials on substrates and was demonstrated by the system of graphene and γ-graphyne on copper substrate. The method works at least 3 orders faster than state-of-the-art algorithms, and the accuracy was tested by molecular dynamics simulations, showing that the precision for calculations of the internal energy achieves up to 0.03% in a tem…
▽ More
A method was developed to calculate the free energy of 2D materials on substrates and was demonstrated by the system of graphene and γ-graphyne on copper substrate. The method works at least 3 orders faster than state-of-the-art algorithms, and the accuracy was tested by molecular dynamics simulations, showing that the precision for calculations of the internal energy achieves up to 0.03% in a temperature range from 100 to 1300K. As expected, the calculated the free energy of a graphene sheet on Cu (111) or Ni (111) surface in a temperature range up to 3000K is always smaller than the one of a γ-graphyne sheet with the same number of C atoms, which is consistent with the fact that growth of graphene on the substrates is much easier than γ-graphyne.
△ Less
Submitted 26 January, 2019;
originally announced January 2019.
-
Solution to the key problem of statistical physics -- calculations of partition function of many-body systems
Authors:
Bo-Yuan Ning,
Le-Cheng Gong,
Tsu-Chien Weng,
Xi-**g Ning
Abstract:
The key problem of statistical physics standing over one hundred years is how to exactly calculate the partition function (or free energy) of many-body interaction systems, which severely hinders application of the theory for realistic systems. Here we present a novel approach that works at least four orders faster than state-of-the-art algorithms to the problem and can be applied to predict therm…
▽ More
The key problem of statistical physics standing over one hundred years is how to exactly calculate the partition function (or free energy) of many-body interaction systems, which severely hinders application of the theory for realistic systems. Here we present a novel approach that works at least four orders faster than state-of-the-art algorithms to the problem and can be applied to predict thermal properties of large molecules or macroscopic condensed matters via \emph{ab initio} calculations.The method was demonstrated by C$_{60}$ molecules, solid and liquid copper (up to $\sim 600$GPa), solid argon, graphene and silicene on substrate, and the derived internal energy or pressure is in a good agreement with the results of vast molecular dynamics simulations in a temperature range up to $2500$K, achieving a precision at least one order higher than previous methods. And, for the first time, the realistic isochoric equation of state for solid argon was reproduced directly from the partition function.
△ Less
Submitted 25 April, 2019; v1 submitted 23 January, 2019;
originally announced January 2019.
-
Predicting the growth rate of helium bubbles in metal tritide
Authors:
Fan-Xin Meng,
Chen Ming,
Xi Chen,
Wei-Feng Yu,
Xi-**g Ning
Abstract:
Helium bubbles nucleation and growth in metals or metal tritide is a long-standing problem attracting considerable attention in nuclear industry but the mechanism remains indistinct and predicting the growth rate of helium bubble is inexistence still up to new. Here, the rate of helium bubbles nucleation and growth in metal tritide is developed based on a dynamical model, which describes the diame…
▽ More
Helium bubbles nucleation and growth in metals or metal tritide is a long-standing problem attracting considerable attention in nuclear industry but the mechanism remains indistinct and predicting the growth rate of helium bubble is inexistence still up to new. Here, the rate of helium bubbles nucleation and growth in metal tritide is developed based on a dynamical model, which describes the diameter of helium bubbles increasing linearly as t**(1/3) in titanium tritide at room temperature, agreeing quite well with the experimental phenomenon. The way of reducing storage temperature from 300 to 225 K or increasing the helium atoms diffusion barrier from 0.81 to 1.1 eV can effectively restrain bubbles growth and prolong lifetime of titanium tritide more than 4 times, which provides a useful reference to relevant experiment exploration and applications. This model also can be used to predict lifetime of new tritium-storage materials and plasma facing materials in nuclear industry.
△ Less
Submitted 3 December, 2013;
originally announced December 2013.
-
If graphynes turn into graphene: the thermal stability study
Authors:
Yi-Guo Xu,
Chen Ming,
Zheng-Zhe Lin,
Fan-Xin Meng,
Jun Zhuang,
Xi-**g Ning
Abstract:
The thermal stability of $α$-, $β$-, 6,6,12-graphyne and graphdiyne was studied by a statistic model, which was seriously tested by classical molecular dynamics simulations. By first-principles calculations of related potential energy curves, the model predicts that all the lifetime of free-standing single layer graphynes considered is more than 10$^{44}$ years at room temperature. When the temper…
▽ More
The thermal stability of $α$-, $β$-, 6,6,12-graphyne and graphdiyne was studied by a statistic model, which was seriously tested by classical molecular dynamics simulations. By first-principles calculations of related potential energy curves, the model predicts that all the lifetime of free-standing single layer graphynes considered is more than 10$^{44}$ years at room temperature. When the temperature gets up to 1000 K, they are still very stable, but quickly turn into graphene if the temperature is about 2000 K
△ Less
Submitted 8 October, 2013;
originally announced October 2013.
-
Tuning the Conductance of Monatomic Carbon Chain
Authors:
Xi Chen,
Chen Ming,
Fan-Xin Meng,
**g-Tian Li,
Jun Zhuang,
Xi-**g Ning
Abstract:
Ab initio calculations show that the conductance of short monatomic carbon chain can be dramatically modified by adhering a single H, N, or O atom to the chain. For example, the conductance of the pristine chain gets about two orders of magnitude smaller if an H atom is adhered to the chain. By a statistical model, the structure of the carbon chain with the single atom adhered is found to be quite…
▽ More
Ab initio calculations show that the conductance of short monatomic carbon chain can be dramatically modified by adhering a single H, N, or O atom to the chain. For example, the conductance of the pristine chain gets about two orders of magnitude smaller if an H atom is adhered to the chain. By a statistical model, the structure of the carbon chain with the single atom adhered is found to be quite stable at room temperature, indicating that the method can be used to tune the conductance of monatomic carbon chain.
△ Less
Submitted 25 July, 2013;
originally announced July 2013.
-
A scheme for realizing continuously tunable spectrum in the visible light region based on monatomic carbon chains
Authors:
Chen Ming,
Fan-Xin Meng,
Xi Chen,
Jun Zhuang,
Xi-**g Ning
Abstract:
We propose a scheme for realizing the continuously tunable spectrum based on monatomic carbon chains. By hybrid density functional calculations, we first show that the direct band gap of monatomic carbon chains change continuously from 1.58 to 3.8 eV as strain is applied from -5 to 10% to the chain, with separated Van Hove singularity peaks enhanced. To realize this tunability, a realistic stretch…
▽ More
We propose a scheme for realizing the continuously tunable spectrum based on monatomic carbon chains. By hybrid density functional calculations, we first show that the direct band gap of monatomic carbon chains change continuously from 1.58 to 3.8 eV as strain is applied from -5 to 10% to the chain, with separated Van Hove singularity peaks enhanced. To realize this tunability, a realistic stretching device is proposed by contacting the chain with graphene sheets, which can apply up to 9% elongation to the chain, yielding tunable light-emitting wavelengths from 345 to 561 nm.
△ Less
Submitted 29 June, 2013; v1 submitted 3 March, 2013;
originally announced March 2013.