-
Modeling the electronic structure of organic materials: A solid-state physicist's perspective
Authors:
Caterina Cocchi,
Michele Guerrini,
Jannis Krumland,
Ngoc Trung Nguyen,
Ana M. Valencia
Abstract:
Modeling the electronic and optical properties of organic semiconductors remains a challenge for theory, despite the remarkable progress achieved in the last three decades. The complexity of these systems, including structural (dis)order and the still debated do** mechanisms, has been engaging theorists with different backgrounds. Regardless of the common interest across the various communities…
▽ More
Modeling the electronic and optical properties of organic semiconductors remains a challenge for theory, despite the remarkable progress achieved in the last three decades. The complexity of these systems, including structural (dis)order and the still debated do** mechanisms, has been engaging theorists with different backgrounds. Regardless of the common interest across the various communities active in this field, these efforts have not led so far to a truly interdisciplinary research area. In the attempt to move further in this direction, we present our perspective as solid-state theorists for the study of molecular materials in different states of matter. Considering exemplary systems belonging to well-known families of oligo-acenes and -thiophenes, we provide a quantitative description of electronic properties and optical excitations obtained with state-of-the-art first-principles methods such as density-functional theory and many-body perturbation theory. Simulating the systems as gas-phase molecules, clusters, and periodic lattices, we are able to identify short- and long-range effects in their electronic structure. While the latter are usually dominant in organic crystals, the former play an important role, too, especially in the case of donor/acceptor complexes. Furthermore, we demonstrate the viability of implicit schemes to evaluate band gaps of molecules embedded in isotropic and even anisotropic environments, in quantitative agreement with experiments. In the context of doped organic semiconductors, we show how the crystalline packing enhances the favorable characteristics of these systems for opto-electronic applications. The counter-intuitive behavior predicted for their electronic and optical properties is deciphered with the aid of a tight-binding model, which represents a connection to the most common approaches to evaluate transport properties in these materials.
△ Less
Submitted 14 February, 2023; v1 submitted 19 August, 2022;
originally announced August 2022.
-
Temperature and Field Dependence of Ferromagnetic Magnon in Monolayer Honeycomb Spin Lattice
Authors:
Niem Tu Nguyen,
Giang Huong Bach,
Thao Huong Pham,
Huy Duy Nguyen,
Oanh Thi Kim Nguyen,
Cong Thanh Bach
Abstract:
Temperature and field dependence of collective spin excitations or magnon in monolayer honeycomb spin lattices is investigated using an anisotropic exchange XZ-Heisenberg model in an external field. Magnetic phase transition in the presence of the transverse field is the spin reorientation (SR) transition with magnon intensity existing above the SR temperature. The transverse field either decrease…
▽ More
Temperature and field dependence of collective spin excitations or magnon in monolayer honeycomb spin lattices is investigated using an anisotropic exchange XZ-Heisenberg model in an external field. Magnetic phase transition in the presence of the transverse field is the spin reorientation (SR) transition with magnon intensity existing above the SR temperature. The transverse field either decreases or sustains the spin-wave intensity in the temperature region below or above the SR temperature, respectively. The gap of the zero-momentum low-energy magnon branch closes at the SR transverse field, which is the critical quantum phase transition field at zero temperature. The application of the model to a two-dimensional CrI$_3$ explains the existence of the zero-momentum magnon mode above the Curie temperature and shows the suitable values of the exchange parameters compared with the DFT calculations. The estimated magnon velocity near the Dirac point in this material is about 1.74 km/s.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
Probabilistic deep learning approach for targeted hybrid organic-inorganic perovskites
Authors:
Vu Ngoc Tuoc,
Nga T. T. Nguyen,
Vinit Sharma,
Tran Doan Huan
Abstract:
We develop a probabilistic machine learning model and use it to screen for new hybrid organic-inorganic perovskites (HOIPs) with targeted electronic band gap. The data set used for this work is highly diverse, containing multiple atomic structures for each of 192 chemically distinct HOIP formulas. Therefore, any property prediction on a given formula must be associated with an irreducible "uncerta…
▽ More
We develop a probabilistic machine learning model and use it to screen for new hybrid organic-inorganic perovskites (HOIPs) with targeted electronic band gap. The data set used for this work is highly diverse, containing multiple atomic structures for each of 192 chemically distinct HOIP formulas. Therefore, any property prediction on a given formula must be associated with an irreducible "uncertainty" that comes from its unknown atomic details. As a result, dozens of new HOIP formulas with band gap falling between 1.25 and 1.50 eV were identified and validated against suitable first-principles computations. Through this demonstration we show that the probabilistic deep learning approach is robust, versatile, and can be used to properly quantify this uncertainty. In conclusion, the probabilistic standpoint and approach described herein could be widely useful for the very common and inevitable data uncertainty which is rooted at the incompleteness of information during experiments and/or computations.
△ Less
Submitted 7 December, 2021; v1 submitted 25 October, 2021;
originally announced October 2021.
-
Double-Side Cocatalytic Activation of Anodic TiO$_2$ Nanotube Membranes with Sputter-Coated Pt for Photocatalytic H$_2$ Generation from Water-Ethanol Mixtures
Authors:
Gihoon Cha,
Marco Altomare,
Nhat Truong Nguyen,
Nicola Taccardi,
Kiyoung Lee,
Patrik Schmuki
Abstract:
Self-standing TiO$_2$ nanotube layers in the form of membranes are fabricated by self-organizing anodization of Ti metal and a potential shock technique. The membranes were then decorated by sputtering different Pt amounts i) only at the top, ii) only at the bottom or iii) at both top and bottom of the tube layers. The Pt-decorated membranes are transferred either in tube top up or in tube top dow…
▽ More
Self-standing TiO$_2$ nanotube layers in the form of membranes are fabricated by self-organizing anodization of Ti metal and a potential shock technique. The membranes were then decorated by sputtering different Pt amounts i) only at the top, ii) only at the bottom or iii) at both top and bottom of the tube layers. The Pt-decorated membranes are transferred either in tube top up or in tube top down configuration onto FTO slides and investigated after crystallization as photocatalysts for H$_2$ generation using either front or back-side light irradiation. Double-side Pt-decoration of the tube membranes leads to higher H$_2$ generation rates (independent of tube and light irradiation configuration) compared to membranes decorated at only one side with similar overall Pt amounts. The results suggest that this effect is not ascribed to the overall amount of Pt cocatalyst as such but rather to its distribution at both tube extremities. This leads to optimized light absorption and electron diffusion/transfer dynamics: the central part of the membranes act as light harvesting zone and electrons therein generated can diffuse towards the Pt/TiO$_2$ active zones (tube extremities) where they can react with the environment and generate H$_2$ gas.
△ Less
Submitted 14 April, 2020;
originally announced June 2020.
-
Dewetted Au nanoparticles on TiO$_2$ surfaces -- Evidence of a size-independent plasmonic photo-electrochemical response
Authors:
Markus Licklederer,
Nhat Truong Nguyen,
Reza Mohammadi,
Hyoungwon Park,
Seyedsina Hejazi,
Marcus Halik,
Nicolas Vogel,
Marco Altomare,
Patrik Schmuki
Abstract:
Flat TiO$_2$ layers are deposited by magnetron sputtering on Ti/Si wafers. The TiO$_2$ surfaces are then sputter-coated with thin Au films of a nominal thickness of 0.5-10 nm that are converted by solid-state dewetting into Au nanoparticles of tuneable size and spacing; the Au nanoparticle size can be tuned over a broad range, i.e. ca. 3-200 nm. The Au-decorated TiO$_2$ surfaces enable plasmonic p…
▽ More
Flat TiO$_2$ layers are deposited by magnetron sputtering on Ti/Si wafers. The TiO$_2$ surfaces are then sputter-coated with thin Au films of a nominal thickness of 0.5-10 nm that are converted by solid-state dewetting into Au nanoparticles of tuneable size and spacing; the Au nanoparticle size can be tuned over a broad range, i.e. ca. 3-200 nm. The Au-decorated TiO$_2$ surfaces enable plasmonic photo-electrochemical water splitting under visible light illumination (450-750 nm). The water splitting performance reaches a maximum for TiO$_2$ layers decorated with ~ 30 nm-sized Au particles. As expected, optical absorption measurements show a red shift of the plasmonic extinction band with increasing the Au nanoparticle size. However, the plasmonic photocurrent is found to peak at ~ 600 nm regardless of the size of the Au nanoparticles, i.e. the plasmonic photocurrent band position is size-independent. Such a remarkable observation can be ascribed to a hot electron injection cut-off effect.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Enhanced Solar Water Splitting by Swift Charge Separation in Au/FeOOH Sandwiched Single Crystalline Fe$_2$O$_3$ Nanoflake Photoelectrodes
Authors:
Lei Wang,
Nhat Truong Nguyen,
Yajun Zhang,
Yingpu Bi,
Patrik Schmuki
Abstract:
In this work, single crystalline $α$-Fe$_2$O$_3$ nanoflakes (NFs) are formed in a highly dense array by Au seeding of a Fe substrate by a thermal oxidation technique. The NFs are conformally decorated with a thin FeOOH cocatalyst layer. Photoelectrochemical (PEC) measurements show that this photoanode with the $α$-Fe$_2$O$_3$/FeOOH NFs rooted on the Au/Fe structure exhibits a significantly enhance…
▽ More
In this work, single crystalline $α$-Fe$_2$O$_3$ nanoflakes (NFs) are formed in a highly dense array by Au seeding of a Fe substrate by a thermal oxidation technique. The NFs are conformally decorated with a thin FeOOH cocatalyst layer. Photoelectrochemical (PEC) measurements show that this photoanode with the $α$-Fe$_2$O$_3$/FeOOH NFs rooted on the Au/Fe structure exhibits a significantly enhanced PEC water oxidation performance compared to the plain $α$-Fe$_2$O$_3$ nanostructure on the Fe substrate. The $α$-Fe$_2$O$_3$/FeOOH NFs on Au/Fe photoanode yields a photocurrent density of 3.1 mA cm-2 at 1.5 VRHE, and a remarkably low onset potential of 0.5-0.6 VRHE in 1 M KOH under AM 1.5G (100 mW cm-2) simulated sunlight illumination. The enhancement in PEC performance can be attributed to a synergistic effect of the FeOOH top decoration and Au under-layer. While FeOOH facilitates hole transfer at the interface of electrode/electrolyte, the Au layer provides a sink for the electron transport to the back contact: this leads overall to a drastically improved charge-separation efficiency in the single crystalline $α$-Fe$_2$O$_3$ NF photoanode.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Highly Conducting Spaced TiO$_2$ Nanotubes Enable Defined Conformal Coating with Nanocrystalline Nb$_2$O$_5$ and High Performance Supercapacitor Applications
Authors:
Selda Ozkan,
Nhat Truong Nguyen,
Imgon Hwang,
Anca Mazare,
Patrik Schmuki
Abstract:
In this work, we report on the electrochemical behavior of nitrided spaced TiO$_2$ nanotubes conformally coated with a nanocrystalline Nb$_2$O$_5$ layer and find for these hierarchical structures an excellent supercapacitor performance. Highly aligned conductive 1D electrodes were obtained by a three step process: i) growth of self-organized nanotubes with defined and adjustable intertube spacing,…
▽ More
In this work, we report on the electrochemical behavior of nitrided spaced TiO$_2$ nanotubes conformally coated with a nanocrystalline Nb$_2$O$_5$ layer and find for these hierarchical structures an excellent supercapacitor performance. Highly aligned conductive 1D electrodes were obtained by a three step process: i) growth of self-organized nanotubes with defined and adjustable intertube spacing, ii) conformal Nb$_2$O$_5$ decoration in the tube interspace (while providing full electrolyte access to the entire active area), and iii) high temperature nitridation. Key is the growth of a nanotube array with regular tube-to-tube interspacing that enables an optimized decoration with secondary materials such as Nb$_2$O$_5$. We observe an increase in electrode capacitance from 158 $μ$F cm-2 for bare TiO$_2$ NTs, to 1536 $μ$F cm-2 for TiO$_2$/Nb$_2$O$_5$ NTs, to finally 37 mF cm-2 for Nb$_2$O$_5$ decorated and then nitrided nanotubes. This drastic increase can be ascribed firstly to the defined spacing established between the tube arrays that then allows for a conformal coating with a secondary active coating. Secondly, nitridation causes a drastic increase of the electron conductivity of the entire scaffold and thus reduces resistive losses.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Effect of Low Oxygen Annealing on Photoelectrochemical Water Splitting Properties of $α$-Fe$_2$O$_3$
Authors:
Yoichi Makimizu,
Nhat Truong Nguyen,
Hyo-** Ahn,
JeongEun Yoo,
Imgon Hwang,
Stepan Kment,
Patrik Schmuki
Abstract:
Photoelectrochemical (PEC) water splitting is a promising method for conversing solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite ($α$-Fe$_2$O$_3$) is one of the most attractive materials for highly efficient charge carrier generation and collection due to its large specific surface area and shortening minority carrier diffusion length required to reach the…
▽ More
Photoelectrochemical (PEC) water splitting is a promising method for conversing solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite ($α$-Fe$_2$O$_3$) is one of the most attractive materials for highly efficient charge carrier generation and collection due to its large specific surface area and shortening minority carrier diffusion length required to reach the surface. In the present work, PEC water splitting performance of $α$-Fe$_2$O$_3$ prepared by anodization of thin iron layers on an FTO glass and subsequent annealing in low O$_2$-Ar ambient with only 0.03% O$_2$ was investigated. The key finding is that annealing the anodic nanostructures with low oxygen concentration provides a strongly enhanced PEC performance compared with classic air annealing. The photocurrent of the former at 1.5 V vs. RHE results in 1.1 mA/cm2, being 11 times higher than that of the latter. The enhancement of the PEC performance for $α$-Fe$_2$O$_3$ annealed in low oxygen atmosphere can be attributed to controlled morphology, Sn do**, and introduction of oxygen vacancies, which contribute to the enhancement of the hole flux from the photogenerated site to the reactive surface and additionally lead to an enhanced hole transfer at the interface between the $α$-Fe$_2$O$_3$ and the electrolyte. From the obtained results, it is evident that low oxygen annealing is a surprisingly effective method of defect engineering and optimizing $α$-Fe$_2$O$_3$ electrodes for a maximized PEC water splitting performance.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Nanoporous AuPt and AuPtAg alloy co-catalysts formed by dewetting-dealloying on ordered TiO2 nanotube surface lead to significantly enhanced photocatalytic H2 generation
Authors:
Nhat Truong Nguyen,
Selda Ozkan,
Ondrej Tomanec,
Xuemei Zhou,
Radek Zboril,
Patrik Schmuki
Abstract:
Effective co-catalysts are of key importance for photocatalytic H2 generation from aqueous environments. An attractive co-catalyst candidate are AuPt (metastable) alloys due to the synergistic electronic and chemical interaction of the constituents in the charge transfer and H2 evolution process. Here we introduce the fabrication of AuPt alloy nanoparticles with nanoporosity (pore size of 2-5 nm)…
▽ More
Effective co-catalysts are of key importance for photocatalytic H2 generation from aqueous environments. An attractive co-catalyst candidate are AuPt (metastable) alloys due to the synergistic electronic and chemical interaction of the constituents in the charge transfer and H2 evolution process. Here we introduce the fabrication of AuPt alloy nanoparticles with nanoporosity (pore size of 2-5 nm) fabricated on spaced TiO2 nanotubes. By dewetting a layered AgAuPt coating, we form AuPtAg alloy nanoparticles. From these alloys, Ag can selectively be dissolved leading to the desired nanoporous AuPt alloy particles with diameter in the range of 10-70 nm deposited as a gradient on the TiO2 nanotubes. A significant enhancement of photocatalytic H2 generation is obtained compared to the same loading of monometallic or nonporous alloy. The nanoporous AuPt particles provide not only a large surface area to volume ratio (and are thus more effective) but also show the intrinsic synergy of a AuPt alloy for H2 generation.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Amorphous Mo-Ta oxide nanotubes for long-term stable Mo oxide based supercapacitors
Authors:
Bowen **,
Seyedsina Hejazi,
Florian Pyczak,
Michael Oehring,
Shiva Mohajernia,
Stepan Kment,
Ondrej Tomanec,
Radek Zboril,
Nhat Truong Nguyen,
Min Yang,
Patrik Schmuki
Abstract:
With a large-scale usage of portable electric appliances, a high demand for increasingly high density energy storage devices has emerged. MoO3 has, in principle, a large potential as negative electrode material in supercapacitive devices, due to high charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO3 in aque…
▽ More
With a large-scale usage of portable electric appliances, a high demand for increasingly high density energy storage devices has emerged. MoO3 has, in principle, a large potential as negative electrode material in supercapacitive devices, due to high charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO3 in aqueous electrolytes prevents a practical use in high capacitance devices. In this work, we describe how to overcome this severe stability issue by forming amorphous molybdenum oxide/tantalum oxide nanotubes by anodic oxidation of a Mo-Ta alloy. The presence of a critical amount of Ta-oxide (> 20 at-%) prevents the electrochemical decay of the MoO3 phase and thus yields an extremely high stability. Due to the protection provided by tantalum oxide, no capacitance losses are measureable after 10000 charg-ing/discharging cycles.
△ Less
Submitted 14 April, 2020;
originally announced May 2020.
-
Spaced TiO$_2$ Nanotube Arrays Allow for High Performance Hierarchical Supercapacitor Structure
Authors:
Nhat Truong Nguyen,
Selda Ozkan,
Imgon Hwang,
Xuemei Zhou,
Patrik Schmuki
Abstract:
In this work we describe the synthesis and electrochemical properties of nitridated hierarchical TiO$_2$ nanotubes as an electrode for supercapacitors. The hierarchical TiO$_2$ nanostructures are formed by a controlled layer-by-layer TiO2 nanoparticle decoration on self-organized spaced TiO$_2$ nanotubes. These structures are then annealed in NH$_3$ atmosphere at elevated temperature to convert th…
▽ More
In this work we describe the synthesis and electrochemical properties of nitridated hierarchical TiO$_2$ nanotubes as an electrode for supercapacitors. The hierarchical TiO$_2$ nanostructures are formed by a controlled layer-by-layer TiO2 nanoparticle decoration on self-organized spaced TiO$_2$ nanotubes. These structures are then annealed in NH$_3$ atmosphere at elevated temperature to convert the material to a nitride structure -- this drastically enhances their electron-transport properties. The areal capacitance of hierarchical structures can be tuned by changing the number of decorated TiO$_2$ nanoparticle layers. The capacitance enhancement of the hierarchical structures reaches a maximum when the surface area through nanoparticle deposition is highest and the conductivity via nitridation is optimized.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Black Magic in Gray Titania: Noble-Metal-Free Photocatalytic H2 Evolution from Hydrogenated Anatase
Authors:
Ning Liu,
Xuemei Zhou,
Nhat Truong Nguyen,
Kristina Peters,
Christopher Schneider,
Detlef Freitag,
Dina Fattakhova-Rohlfing,
Patrik Schmuki
Abstract:
"Black" TiO2 has gained increasing interest because of its outstanding properties and promising applications in a wide range of fields. Among the outstanding features of the material is that certain synthesis processes lead to the formation of an intrinsic co-catalytic center and thus enable noble-metal free photocatalytic H2 generation. In this work, we report "grey TiO2" by an appropriate hydrog…
▽ More
"Black" TiO2 has gained increasing interest because of its outstanding properties and promising applications in a wide range of fields. Among the outstanding features of the material is that certain synthesis processes lead to the formation of an intrinsic co-catalytic center and thus enable noble-metal free photocatalytic H2 generation. In this work, we report "grey TiO2" by an appropriate hydrogenation treatment exhibits excellent photocatalytic hydrogen. In this case, by the employment of thermally stable and high-surface-area TiO2 nanoparticles as well as mesoporous particles as the hydrogenation precursor, the appropriate extent of reduction of TiO2 (coloration) and the formation of Ti3+ is the key for the efficient noble-metal-free photocatalytic H2 generation. The EPR results reveal that "grey TiO2" shows stronger Ti3+ feature at g ca. 1.93 than "black TiO2" contributing to the intrinsic catalytic center for H2 evolution.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Forming a highly active, homogeneously alloyed AuPt co-catalyst decoration on O2 nanotubes directly during anodic growth
Authors:
Haidong Bian,
Nhat Truong Nguyen,
JeongEun Yoo,
Seyedsina Hejazi,
Shiva Mohajernia,
Julian Mueller,
Erdmann Spiecker,
Hiroaki Tsuchiya,
Ondrej Tomanec,
Beatriz E. Sanabria-Arenas,
Radek Zboril,
Yang Yang Li,
Patrik Schmuki
Abstract:
Au and Pt do not form homogeneous bulk alloys as they are thermodynamically not miscible. However, we show that anodic TiO$_2$ nanotubes (NTs) can in-situ be uniformly decorated with homogeneous AuPt alloy nanoparticles (NPs) during their anodic growth. For this, a metallic Ti substrate containing low amounts of dissolved Au (0.1 at%) and Pt (0.1 at%) is used for anodizing. The matrix metal (Ti) i…
▽ More
Au and Pt do not form homogeneous bulk alloys as they are thermodynamically not miscible. However, we show that anodic TiO$_2$ nanotubes (NTs) can in-situ be uniformly decorated with homogeneous AuPt alloy nanoparticles (NPs) during their anodic growth. For this, a metallic Ti substrate containing low amounts of dissolved Au (0.1 at%) and Pt (0.1 at%) is used for anodizing. The matrix metal (Ti) is converted to oxide while at the oxide/metal interface direct noble metal particle formation and alloying of Au and Pt takes place; continuously these particles are then picked up by the growing nanotube wall. In our experiments the AuPt alloy NPs have an average size of 4.2 nm and, at the end of the anodic process, are regularly dispersed over the TiO$_2$ nanotubes. These alloyed AuPt particles act as excellent co-catalyst in photocatalytic H2 generation - with a H2 production of 12.04 μL h-1 under solar light. This represents a strongly enhanced activity as compared with TiO$_2$ NTs decorated with monometallic particles of Au (7 μL h-1) or Pt (9.96 μL h-1).
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Optically Tailored Trap** Geometries for Ultracold Atoms on a Type-II Superconducting Chip
Authors:
Francesca Tosto,
Phyo Baw Swe,
Nghia Tin Nguyen,
Christoph Hufnagel,
María Martínez Valado,
Leonid Prigozhin,
Vladimir Sokolovsky,
Rainer Dumke
Abstract:
Superconducting atom chips have very significant advantages in realizing trap** structures for ultracold atoms compared to conventional atom chips. We extend these advantages further by develo** the ability to dynamically tailor the superconducting trap architecture. Heating the chosen parts of a superconducting film by transferring optical images onto its surface we are able to modify the cur…
▽ More
Superconducting atom chips have very significant advantages in realizing trap** structures for ultracold atoms compared to conventional atom chips. We extend these advantages further by develo** the ability to dynamically tailor the superconducting trap architecture. Heating the chosen parts of a superconducting film by transferring optical images onto its surface we are able to modify the current density distribution and create desired trap** potentials. This method enables us to change the shape and structure of magnetic traps, enabling versatile applications in atomtronics.
△ Less
Submitted 8 May, 2019;
originally announced May 2019.
-
Thermodynamic properties of ferroics described by the transverse Ising model and their applications for CoNb$_2$O$_6$
Authors:
Cong Thanh Bach,
Niem Tu Nguyen,
Giang Huong Bach
Abstract:
The temperature and transverse field dependence of the entropy and the specific heat of ferroics in the quantum paramagnetic (QPa) state is investigated using the transverse Ising model (TIM) with different spin values within mean field and Gaussian spin fluctuation approximations. A maximum peak of the temperature dependence of the specific heat curves is enhanced in the QPa state due to spin flu…
▽ More
The temperature and transverse field dependence of the entropy and the specific heat of ferroics in the quantum paramagnetic (QPa) state is investigated using the transverse Ising model (TIM) with different spin values within mean field and Gaussian spin fluctuation approximations. A maximum peak of the temperature dependence of the specific heat curves is enhanced in the QPa state due to spin fluctuations. This peak shifts to higher temperature region and its magnitude reduces with increasing transverse field. In addition, the temperature corresponding to this maximum depends linearly on the deviation of the transverse field from its critical value. The obtained specific heat qualitatively agrees with the experimental observation for the quasi-one-dimensional (1D) Ising ferromagnet CoNb$_2$O$_6$ in the QPa phase. It is also shown that the spin-1/2 three dimensional (3D) TIM clearly describes the specific heat of CoNb$_2$O$_6$ in the QPa states near the critical temperature. However, the spin-3/2 3D-TIM is more adequate than the spin-1/2 3D-TIM for describing the thermal behavior of CoNb$_2$O$_6$ in the QPa states at high fields and at elevated temperatures.
△ Less
Submitted 21 August, 2019; v1 submitted 21 September, 2018;
originally announced September 2018.
-
On the density of states of circular graphene quantum dots
Authors:
H. Chau Nguyen,
Nhung T. T. Nguyen,
V. Lien Nguyen
Abstract:
We suggest a simple approach to calculate the local density of states that effectively applies to any structure created by an axially symmetric potential on a continuous graphene sheet such as circular graphene quantum dots or rings. Calculations performed for the graphene quantum dot studied in a recent scanning tunneling microscopy measurement [{\sl Gutierrez et al. Nat. Phys. \textbf{12}, 1069-…
▽ More
We suggest a simple approach to calculate the local density of states that effectively applies to any structure created by an axially symmetric potential on a continuous graphene sheet such as circular graphene quantum dots or rings. Calculations performed for the graphene quantum dot studied in a recent scanning tunneling microscopy measurement [{\sl Gutierrez et al. Nat. Phys. \textbf{12}, 1069--1075 (2016)}] show an excellent experimental-theoretical agreement.
△ Less
Submitted 27 September, 2017; v1 submitted 2 May, 2017;
originally announced May 2017.
-
TiO2 nanotubes with laterally spaced ordering enable optimized hierarchical structures with significantly enhanced photocatalytic H2 generation
Authors:
Nhat Truong Nguyen,
Selda Ozkan,
Imgon Hwang,
Anca Mazare,
Patrik Schmuki
Abstract:
In the present work we grow self-organized TiO2 nanotube arrays with a defined and controlled regular spacing between individual nanotubes. These defined intertube gaps allow to build up hierarchical 1D-branched structures, conformally coated on the nanotube walls using a layer by layer nanoparticle TiO2 decoration of the individual tubes, i.e. having not only a high control over the TiO2 nanotube…
▽ More
In the present work we grow self-organized TiO2 nanotube arrays with a defined and controlled regular spacing between individual nanotubes. These defined intertube gaps allow to build up hierarchical 1D-branched structures, conformally coated on the nanotube walls using a layer by layer nanoparticle TiO2 decoration of the individual tubes, i.e. having not only a high control over the TiO2 nanotube host structure but also on the harvesting layers. After optimizing the intertube spacing, we build host-guest arrays that show a drastically enhanced performance in photocatalytic H2 generation, compared to any arrangement of conventional TiO2 nanotubes or conventional TiO2 nanoparticle layers. We show this beneficial effect to be due to a combination of increased large surface area (mainly provided by the nanoparticle layers) with a fast transport of the harvested charge within the passivated 1D nanotubes. We anticipate that this type of hierarchical structures based on TiO2 nanotubes with adjustable spacing will find even wider application, as they provide an unprecedented controllable combination of surface area and carrier transport.
△ Less
Submitted 26 October, 2016;
originally announced October 2016.
-
Stable Co-Catalyst-Free Photocatalytic H2 Evolution From Oxidized Titanium Nitride Nanopowders
Authors:
Xuemei Zhou,
Eva M. Zolnhofer,
Nhat Truong Nguyen,
Ning Liu,
Karsten Meyer,
Patrik Schmuki
Abstract:
In the present work, a simple strategy is used to thermally oxidize TiN nanopowder (ca. 20 nm) to an anatase phase of a TiO2:Ti3+:N compound. In contrast to the rutile phase of such a compound this photocatalyst provides photocatalytic activity for hydrogen evolution under AM1.5 conditions - this without the use of any noble metal co-catalyst. Moreover the photocatalyst is active and stable over e…
▽ More
In the present work, a simple strategy is used to thermally oxidize TiN nanopowder (ca. 20 nm) to an anatase phase of a TiO2:Ti3+:N compound. In contrast to the rutile phase of such a compound this photocatalyst provides photocatalytic activity for hydrogen evolution under AM1.5 conditions - this without the use of any noble metal co-catalyst. Moreover the photocatalyst is active and stable over extended periods of time (tested for 4 months). Importantly, to achieve successful conversion to the active anatase polymorph, sufficiently small starting particles of TiN are needed. The key factor for catalysis is the stabilization of the co-catalytically active Ti3+ species against oxidation by nitrogen present in the starting material.
△ Less
Submitted 20 October, 2016;
originally announced October 2016.
-
Use of Anodic TiO2 Nanotube Layers as Mesoporous Scaffolds for Fabricating CH3NH3PbI3 Perovskite-based Solid State Solar Cells
Authors:
Raul Salazar,
Marco Altomare,
Kiyoung Lee,
Jyotsna Tripathy,
Robin Kirchgeorg,
Nhat Truong Nguyen,
Mohamed Mokhtar,
Abdelmohsen Alshehri,
Shaeel A. Al-Thabaiti,
Patrik Schmuki
Abstract:
We optimize the deposition of CH3NH3PbI3 perovskite into mesoporous electrodes consisting of anodic TiO2 nanotube layers. By a simple spin coating approach, complete filling of the tube scaffolds is obtained, that leads to interdigitated perovskite structures in conformal contact with the TiO2 tube counterparts. Such assemblies can be used as solid state solar cells in hole-transporting material-f…
▽ More
We optimize the deposition of CH3NH3PbI3 perovskite into mesoporous electrodes consisting of anodic TiO2 nanotube layers. By a simple spin coating approach, complete filling of the tube scaffolds is obtained, that leads to interdigitated perovskite structures in conformal contact with the TiO2 tube counterparts. Such assemblies can be used as solid state solar cells in hole-transporting material-free configuration, i.e., the tube scaffold serves as electron collector and blocking layer, while the perovskite acts as visible light absorber and hole transporting material. We show that the complete filling of the tube scaffold with the perovskite is essential to improve the solar cell efficiency.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
-
Aligned metal oxide nanotube arrays: key-aspects of anodic TiO2 nanotube formation and properties
Authors:
Francesca Riboni,
Nhat Truong Nguyen,
Seulgi So,
Patrik Schmuki
Abstract:
Over the past ten years, self-aligned TiO2 nanotubes have attracted tremendous scientific and technological interest due to their anticipated impact on energy conversion, environment remediation and biocompatibility. In the present manuscript, we review fundamental principles that govern the self-organized initiation of anodic TiO2 nanotubes. We start with the fundamental question: Why is self-org…
▽ More
Over the past ten years, self-aligned TiO2 nanotubes have attracted tremendous scientific and technological interest due to their anticipated impact on energy conversion, environment remediation and biocompatibility. In the present manuscript, we review fundamental principles that govern the self-organized initiation of anodic TiO2 nanotubes. We start with the fundamental question: Why is self-organization taking place? We illustrate the inherent key mechanistic aspects that lead to tube growth in various different morphologies, such as rippled-walled tubes, smooth tubes, stacks and bamboo-type tubes, and importantly the formation of double-walled TiO2 nanotubes versus single-walled tubes, and the drastic difference in their physical and chemical properties. We show how both double- and single-walled tube layers can be detached from the metallic substrate and exploited for the preparation of robust self-standing membranes. Finally, we show how by selecting the right growth approach to TiO2 nanotubes specific functional features can be significantly improved, e.g., an enhanced electron mobility, intrinsic do**, or crystallization into pure anatase at extremely high temperatures can be achieved. This in turn can be exploited in constructing high performance devices based on anodic TiO2 in a wide range of applications.
△ Less
Submitted 14 October, 2016;
originally announced October 2016.
-
Efficient Photocatalytic H2 Evolution: Controlled Dewetting-Dealloying to Fabricate Site-Selective High-activity Nanoporous Au Particles on Highly Ordered TiO2 Nanotube Arrays
Authors:
Nhat Truong Nguyen,
Marco Altomare,
JeongEun Yoo,
Patrik Schmuki
Abstract:
Overlaid self-ordering processes: we form anodic self-organized TiO2 nanostumps and exploit them for self-ordering dewetting of Au-Ag sputtered films. This forms ordered particle configurations at tube top (crown position) or bottom (ground position). By dealloying we then form, from minimal amount of noble metal, porous Au nanoparticles that when in crown position allow for a drastically improved…
▽ More
Overlaid self-ordering processes: we form anodic self-organized TiO2 nanostumps and exploit them for self-ordering dewetting of Au-Ag sputtered films. This forms ordered particle configurations at tube top (crown position) or bottom (ground position). By dealloying we then form, from minimal amount of noble metal, porous Au nanoparticles that when in crown position allow for a drastically improved photocatalytic H2 production compared with nanoparticles produced by conventional dewetting processes.
△ Less
Submitted 14 October, 2016;
originally announced October 2016.
-
Controlled spacing of self-organized anodic TiO2 nanotubes
Authors:
Selda Ozkan,
Nhat Truong Nguyen,
Anca Mazare,
Patrik Schmuki
Abstract:
We report on how to grow and control self-organized TiO2 nanotube arrays that show defined and regular gaps between individual nanotubes. For this we use electrochemical anodization of titanium in fluoride containing di-ethylene glycol (DEG) electrolytes, with variations in voltage and water content in the electrolyte. In these specific electrolytes, such nanotubes show a true spacing, i.e. nanotu…
▽ More
We report on how to grow and control self-organized TiO2 nanotube arrays that show defined and regular gaps between individual nanotubes. For this we use electrochemical anodization of titanium in fluoride containing di-ethylene glycol (DEG) electrolytes, with variations in voltage and water content in the electrolyte. In these specific electrolytes, such nanotubes show a true spacing, i.e. nanotubes are spaced both at top and at bottom in regular intervals, this in contrast to classic nanotubes obtained in other organic electrolytes showing a close-packed organization. We identify critical parameters, that define the region of existence i.e. under which condition tube spacing occurs as well as the intertube distance, to be the voltage and the water content. Using these findings allows to grow tubes where diameter and spacing can even be independently controlled.
△ Less
Submitted 13 October, 2016;
originally announced October 2016.
-
Aminated TiO2 nanotube as a Photoelectrochemical Water Splitting photoanode
Authors:
Seyedsina Hejazi,
Nhat Truong Nguyen,
Anca Mazare,
Patrik Schmuki
Abstract:
The present work reports on the enhancement of TiO2 nanotubes photoelectrochemical water splitting rate by decorating the nanostructure with an amine layer in a hydrothermal process using diethylenetriamine (DETA). The aminate coated TiO2 tubes show a stable improvement of the photoresponse in both UV and visible light spectrum and under hydrothermal conditions, 4-fold increase of the photoelectro…
▽ More
The present work reports on the enhancement of TiO2 nanotubes photoelectrochemical water splitting rate by decorating the nanostructure with an amine layer in a hydrothermal process using diethylenetriamine (DETA). The aminate coated TiO2 tubes show a stable improvement of the photoresponse in both UV and visible light spectrum and under hydrothermal conditions, 4-fold increase of the photoelectrochemical water splitting rate is observed. From intensity modulated photocurrent spectroscopy (IMPS) measurements significantly faster electron transport times are observed indicating a surface passivating effect of the N-decoration.
△ Less
Submitted 13 October, 2016;
originally announced October 2016.
-
Anodic TiO2 nanotube layers: why does self-organized growth occur - A mini review
Authors:
Xuemei Zhou,
Nhat Truong Nguyen,
Selda Ozkan,
Patrik Schmuki
Abstract:
The present review gives an overview of the highlights of more than 10 years of research on synthesis and applications of ordered oxide structures (nanotube layers, hexagonal pore arrangements) that are formed by self-organizing anodization of metals. In particular we address the questions after the critical factors that lead to the spectacular self-ordering during the growth of anodic oxides that…
▽ More
The present review gives an overview of the highlights of more than 10 years of research on synthesis and applications of ordered oxide structures (nanotube layers, hexagonal pore arrangements) that are formed by self-organizing anodization of metals. In particular we address the questions after the critical factors that lead to the spectacular self-ordering during the growth of anodic oxides that finally yield morphologies such as highly ordered TiO2 nanotube arrays and similar structures. Why are tubes and pores formed - what are the key parameters controlling these processes?
△ Less
Submitted 12 October, 2016;
originally announced October 2016.
-
An Atomtronic Flux Qubit: A ring lattice of Bose-Einstein condensates interrupted by three weak links
Authors:
D. Aghamalyan,
N. T. Nguyen,
F. Auksztol,
K. S. Gan,
M. Martinez Valado,
P. C. Condylis,
L. -C. Kwek,
R. Dumke,
L. Amico
Abstract:
We study a physical system consisting of a Bose-Einstein condensate confined to a ring shaped lattice potential interrupted by three weak links. The system is assumed to be driven by an effective flux piercing the ring lattice. By employing path integral techniques, we explore the effective quantum dynamics of the system in a pure quantum phase dynamics regime. Moreover, the effects of the density…
▽ More
We study a physical system consisting of a Bose-Einstein condensate confined to a ring shaped lattice potential interrupted by three weak links. The system is assumed to be driven by an effective flux piercing the ring lattice. By employing path integral techniques, we explore the effective quantum dynamics of the system in a pure quantum phase dynamics regime. Moreover, the effects of the density's quantum fluctuations are studied through exact diagonalization analysis of the spectroscopy of the Bose-Hubbard model. We demonstrate that a clear two-level system emerges by tuning the magnetic flux at degeneracy. The lattice confinement, platform for the condensate, is realized experimentally employing a spatial light modulator.
△ Less
Submitted 14 July, 2016; v1 submitted 28 December, 2015;
originally announced December 2015.
-
The transfer matrix approach to circular graphene quantum dots
Authors:
H. Chau Nguyen,
Nhung T. T. Nguyen,
V. Lien Nguyen
Abstract:
We adapt the transfer matrix ($\T$-matrix) method originally designed for one-dimensional quantum mechanical problems to solve the circularly symmetric two-dimensional problem of graphene quantum dots. In similarity to one-dimensional problems, we show that the generalized $\T$-matrix contains rich information about the physical properties of these quantum dots. In particular, it is shown that the…
▽ More
We adapt the transfer matrix ($\T$-matrix) method originally designed for one-dimensional quantum mechanical problems to solve the circularly symmetric two-dimensional problem of graphene quantum dots. In similarity to one-dimensional problems, we show that the generalized $\T$-matrix contains rich information about the physical properties of these quantum dots. In particular, it is shown that the spectral equations for bound states as well as quasi-bound states of a circular graphene quantum dot and related quantities such as the local density of states and the scattering coefficients are all expressed exactly in terms of the $\T$-matrix for the radial confinement potential. As an example, we use the developed formalism to analyse physical aspects of a graphene quantum dot induced by a trapezoidal radial potential. Among the obtained results, it is in particular suggested that the thermal fluctuations and electrostatic disorders may appear as an obstacle to controlling the valley polarization of Dirac electrons.
△ Less
Submitted 24 May, 2016; v1 submitted 2 November, 2015;
originally announced November 2015.
-
From toroidal to rod-like condensates of semiflexible polymers
Authors:
Trinh Xuan Hoang,
Achille Giacometti,
Rudolf Podgornik,
Nhung T. T. Nguyen,
Jayanth R. Banavar,
Amos Maritan
Abstract:
The competition between toroidal and rod-like conformations as possible ground states for DNA condensation is studied as a function of the stiffness, the length of the DNA and the form of the long-range interactions between neighboring molecules, using analytical theory supported by Monte Carlo simulations. Both conformations considered are characterized by a local nematic order with hexagonal pac…
▽ More
The competition between toroidal and rod-like conformations as possible ground states for DNA condensation is studied as a function of the stiffness, the length of the DNA and the form of the long-range interactions between neighboring molecules, using analytical theory supported by Monte Carlo simulations. Both conformations considered are characterized by a local nematic order with hexagonal packing symmetry of neighboring DNA molecules, but differ in global configuration of the chain and the distribution of its curvature as it wraps around to form a condensate. The long-range interactions driving the DNA condensation are assumed to be of the form pertaining to the attractive depletion potential as well as the attractive counterion induced soft potential. In the stiffness-length plane we find a transition between rod-like to toroid condensate for increasing stiffness at a fixed chain length $L$. Strikingly, the transition line is found to have a $L^{1/3}$ dependence irrespective of the details of the long-range interactions between neighboring molecules. When realistic DNA parameters are used, our description reproduces rather well some of the experimental features observed in DNA condensates.
△ Less
Submitted 12 February, 2014; v1 submitted 17 January, 2014;
originally announced January 2014.
-
Screening of charged impurities with multi-electron singlet-triplet spin qubits in quantum dots
Authors:
Edwin Barnes,
J. P. Kestner,
N. T. T. Nguyen,
S. Das Sarma
Abstract:
Charged impurities in semiconductor quantum dots comprise one of the main obstacles to achieving scalable fabrication and manipulation of singlet-triplet spin qubits. We theoretically show that using dots that contain several electrons each can help to overcome this problem through the screening of the rough and noisy impurity potential by the excess electrons. We demonstrate how the desired scree…
▽ More
Charged impurities in semiconductor quantum dots comprise one of the main obstacles to achieving scalable fabrication and manipulation of singlet-triplet spin qubits. We theoretically show that using dots that contain several electrons each can help to overcome this problem through the screening of the rough and noisy impurity potential by the excess electrons. We demonstrate how the desired screening properties turn on as the number of electrons is increased, and we characterize the properties of a double quantum dot singlet-triplet qubit for small odd numbers of electrons per dot. We show that the sensitivity of the multi-electron qubit to charge noise may be an order of magnitude smaller than that of the two-electron qubit.
△ Less
Submitted 15 December, 2011; v1 submitted 5 August, 2011;
originally announced August 2011.
-
Impurity effects on semiconductor quantum bits in coupled quantum dots
Authors:
Nga T. T. Nguyen,
S. Das Sarma
Abstract:
We theoretically consider the effects of having unintentional charged impurities in laterally coupled two-dimensional double (GaAs) quantum dot systems, where each dot contains one or two electrons and a single charged impurity in the presence of an external magnetic field. Using molecular orbital and configuration interaction method, we calculate the effect of the impurity on the 2-electron energ…
▽ More
We theoretically consider the effects of having unintentional charged impurities in laterally coupled two-dimensional double (GaAs) quantum dot systems, where each dot contains one or two electrons and a single charged impurity in the presence of an external magnetic field. Using molecular orbital and configuration interaction method, we calculate the effect of the impurity on the 2-electron energy spectrum of each individual dot as well as on the spectrum of the coupled-double-dot 2-electron system. We find that the singlet-triplet exchange splitting between the two lowest energy states, both for the individual dots and the coupled dot system, depends sensitively on the location of the impurity and its coupling strength (i.e. the effective charge). A strong electron-impurity coupling breaks down equality of the two doubly-occupied singlets in the left and the right dot leading to a mixing between different spin singlets. As a result, the maximally entangled qubit states are no longer fully obtained in zero magnetic field case. Moreover, a repulsive impurity results in a triplet-singlet transition as the impurity effective charge increases or/and the impurity position changes. We comment on the impurity effect in spin qubit operations in the double dot system based on our numerical results.
△ Less
Submitted 10 July, 2011; v1 submitted 3 March, 2011;
originally announced March 2011.
-
Many-body effects in the cyclotron resonance of a magnetic dot
Authors:
Nga T. T. Nguyen,
F. M. Peeters
Abstract:
Intraband cyclotron resonance (CR) transitions of a two-electron quantum dot containing a single magnetic ion is investigated for different Coulomb interaction strengths and different positions of the magnetic ion. In contrast to the usual parabolic quantum dots where CR is independent of the number of electrons, we found here that due to the presence of the magnetic ion Kohn's theorem no longer…
▽ More
Intraband cyclotron resonance (CR) transitions of a two-electron quantum dot containing a single magnetic ion is investigated for different Coulomb interaction strengths and different positions of the magnetic ion. In contrast to the usual parabolic quantum dots where CR is independent of the number of electrons, we found here that due to the presence of the magnetic ion Kohn's theorem no longer holds and CR is different for systems with different number of electrons and different effective electron-electron Coulomb interaction strength. Many-body effects result in \emph{shifts in the transition energies} and \emph{change the number of CR lines}. The position of the magnetic ion inside the quantum dot affects the structure of the CR spectrum by changing the position and the number of crossings and anti-crossings in the transition energies and oscillator strengths.
△ Less
Submitted 24 September, 2009;
originally announced September 2009.
-
Cyclotron resonance of a magnetic quantum dot
Authors:
Nga T. T. Nguyen,
F. M. Peeters
Abstract:
The energy spectrum of a one-electron quantum dot doped with a single magnetic ion is studied in the presence of an external magnetic field. The allowed cyclotron resonance (CR) transitions are obtained together with their oscillator strength (OS) as function of the magnetic field, the position of the magnetic ion, and the quantum dot confinement strength. With increasing magnetic field a ferrom…
▽ More
The energy spectrum of a one-electron quantum dot doped with a single magnetic ion is studied in the presence of an external magnetic field. The allowed cyclotron resonance (CR) transitions are obtained together with their oscillator strength (OS) as function of the magnetic field, the position of the magnetic ion, and the quantum dot confinement strength. With increasing magnetic field a ferromagnetic - antiferromagnetic transition is found that results in clear signatures in the CR absorption. It leads to discontinuities in the transition energies and the oscillator strengths and an increase of the number of allowed transitions.
△ Less
Submitted 18 November, 2008;
originally announced November 2008.
-
Magnetic field dependence of the many-electron states in a magnetic quantum dot: The ferromagnetic-antiferromagnetic transition
Authors:
Nga T. T. Nguyen,
F. M. Peeters
Abstract:
The electron-electron correlations in a many-electron (Ne = 1, 2,..., 5) quantum dot confined by a parabolic potential is investigated in the presence of a single magnetic ion and a perpendicular magnetic field. We obtained the energy spectrum and calculated the addition energy which exhibits cusps as function of the magnetic field. The vortex properties of the many-particle wave function of the…
▽ More
The electron-electron correlations in a many-electron (Ne = 1, 2,..., 5) quantum dot confined by a parabolic potential is investigated in the presence of a single magnetic ion and a perpendicular magnetic field. We obtained the energy spectrum and calculated the addition energy which exhibits cusps as function of the magnetic field. The vortex properties of the many-particle wave function of the ground state are studied and for large magnetic fields are related to composite fermions. The position of the impurity influences strongly the spin pair correlation function when the external field is large. In small applied magnetic field, the spin exchange energy together with the Zeeman terms leads to a ferromagnetic-antiferromagnetic(FM-AFM) transition. When the magnetic ion is shifted away from the center of the quantum dot a remarkable re-entrant AFM-FM-AFM transition is found as function of the strength of the Coulomb interaction. Thermodynamic quantities as the heat capacity, the magnetization, and the susceptibility are also studied. Cusps in the energy levels show up as peaks in the heat capacity and the susceptibility.
△ Less
Submitted 18 November, 2008;
originally announced November 2008.
