Showing 1–50 of 55 results for author: Neumann, M

Effect of crystallographic twins on the elastoplastic response of polycrystals

Authors: Lucas Monteiro Fernandes, Philipp Rieder, Matthias Neumann, Aude Mulard, Henry Proudhon, Volker Schmidt, François Willot

Abstract: We investigate the influence of crystallographic twins on the elastoplastic response of $γ$-TiAl intermetallics via full-field FFT-based computations. We first introduce a hierarchical stochastic model, which is used to simulate synthetic polycrystalline microstructures containing twin grains with certain morphologies, and apply it to generate representative volume elements. Second, we develop a F… ▽ More We investigate the influence of crystallographic twins on the elastoplastic response of $γ$-TiAl intermetallics via full-field FFT-based computations. We first introduce a hierarchical stochastic model, which is used to simulate synthetic polycrystalline microstructures containing twin grains with certain morphologies, and apply it to generate representative volume elements. Second, we develop a Fourier-based method with regularization for solving the effective and local mechanical response of polycrystalline media using the Méric-Cailletaud crystal plasticity constitutive law. Numerical results show that, across configurations of twinning, the corresponding average effective response is similar. Although differences were quantified, the effect of twins on the yield stress is negligible in practice (less than $1\%$). △ Less

Submitted 15 February, 2024; originally announced February 2024.

Stochastic 3D microstructure modeling of twinned polycrystals for investigating the mechanical behavior of $γ$-TiAl intermetallics

Authors: Philipp Rieder, Matthias Neumann, Lucas Monteiro Fernandes, Aude Mulard, Henry Proudhon, François Willot, Volker Schmidt

Abstract: A stochastic 3D microstructure model for polycrystals is introduced which incorporates two types of twin grains, namely neighboring and inclusion twins. They mimic the presence of crystal twins in $γ$-TiAl polycrystalline microstructures as observed by 3D imaging techniques. The polycrystal grain morphology is modeled by means of Voronoi and -- more generally -- Laguerre tessellations. The crystal… ▽ More A stochastic 3D microstructure model for polycrystals is introduced which incorporates two types of twin grains, namely neighboring and inclusion twins. They mimic the presence of crystal twins in $γ$-TiAl polycrystalline microstructures as observed by 3D imaging techniques. The polycrystal grain morphology is modeled by means of Voronoi and -- more generally -- Laguerre tessellations. The crystallographic orientation of each grain is either sampled uniformly on the space of orientations or chosen to be in a twinning relation with another grain. The model is used to quantitatively study relationships between morphology and mechanical properties of polycrystalline materials. For this purpose, full-field Fourier-based computations are performed to investigate the combined effect of grain morphology and twinning on the overall elastic response. For $γ$-TiAl polycrystallines, the presence of twins is associated with a softer response compared to polycrystalline aggregates without twins. However, when comparing the influence on the elastic response, a statistically different polycrystalline morphology has a much smaller effect than the presence of twin grains. Notably, the bulk modulus is almost insensitive to the grain morphology and exhibits much less sensitivity to the presence of twins compared to the shear modulus. The numerical results are consistent with a two-scale homogenization estimate that utilizes laminate materials to model the interactions of twins. △ Less

Submitted 28 February, 2024; v1 submitted 16 January, 2024; originally announced January 2024.

Influence of Electrode Structuring Techniques on the Performance of All-Solid-State Batteries

Authors: Moritz Clausnitzer, Timo Danner, Benedikt Prifling, Matthias Neumann, Volker Schmidt, Arnulf Latz

Abstract: All-solid-state batteries (ASSBs) offer a promising route to safer batteries with superior energy density compared to conventional Li-ion batteries (LIBs). However, the design of the composite cathode and optimization of the underlying microstructure is one of the aspects requiring intensive research. Achieving both high energy and power density remains challenging due to limitations in ionic cond… ▽ More All-solid-state batteries (ASSBs) offer a promising route to safer batteries with superior energy density compared to conventional Li-ion batteries (LIBs). However, the design of the composite cathode and optimization of the underlying microstructure is one of the aspects requiring intensive research. Achieving both high energy and power density remains challenging due to limitations in ionic conductivity and active material loading. Using structure-resolved simulations, we investigate the potential of perforated and layered electrode designs to enhance ASSB performance. Design strategies showing significant performance increase in LIBs are evaluated regarding their application to ASSBs. Composite cathodes with solid electrolyte channels in the structure do not significantly increase cell performance compared to unstructured electrodes. However, the design with a two-layer cathode proves promising. The layered structure effectively balances improved ionic transport due to increased solid electrolyte fraction at the separator side and substantial active material loading through increased active material fraction at the current collector side of the cathode. Our research highlights key challenges in ASSB development and provides a clear direction for future studies in the field. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: 46 pages, 15 figures

Stochastic 3D modeling of nanostructured NVP/C active material particles for sodium-ion batteries

Authors: Matthias Neumann, Tom Philipp, Marcel Häringer, Gregor Neusser, Joachim R. Binder, Christine Kranz

Abstract: A data-driven modeling approach is presented to quantify the influence of morphology on effective properties in nanostructured sodium vanadium phosphate $\mathrm{Na}_3\mathrm{V}_2(\mathrm{PO}_4)_3$/ carbon composites (NVP/C), which are used as cathode material in sodium-ion batteries. This approach is based on the combination of advanced imaging techniques, experimental nanostructure characterizat… ▽ More A data-driven modeling approach is presented to quantify the influence of morphology on effective properties in nanostructured sodium vanadium phosphate $\mathrm{Na}_3\mathrm{V}_2(\mathrm{PO}_4)_3$/ carbon composites (NVP/C), which are used as cathode material in sodium-ion batteries. This approach is based on the combination of advanced imaging techniques, experimental nanostructure characterization and stochastic modeling of the 3D nanostructure consisting of NVP, carbon and pores. By 3D imaging and subsequent post-processing involving image segmentation, the spatial distribution of NVP is resolved in 3D, and the spatial distribution of carbon and pores is resolved in 2D. Based on this information, a parametric stochastic model, specifically a Pluri-Gaussian model, is calibrated to the 3D morphology of the nanostructured NVP/C particles. Model validation is performed by comparing the nanostructure of simulated NVP/C composites with image data in terms of morphological descriptors which have not been used for model calibration. Finally, the stochastic model is used for predictive simulation to quantify the effect of varying the amount of carbon while kee** the amount of NVP constant. The presented methodology opens new possibilities for a ressource-efficient optimization of the morphology of NVP/C particles by modeling and simulation. △ Less

Submitted 10 October, 2023; originally announced October 2023.

MSC Class: 62H11; 82D30; 94A04

Morphology-Dependent Influences on the Performance of Battery Cells with a Hierarchically Structured Positive Electrode

Authors: Johanna Naumann, Nicole Bohn, Oleg Birkholz, Matthias Neumann, Marcus Müller, Joachim R. Binder, Marc Kamlah

Abstract: The rising demand for high-performing batteries requires new technological concepts. To facilitate fast charge and discharge, hierarchically structured electrodes offer short diffusion paths in the active material. However, there are still gaps in understanding the influences on the cell performance of such electrodes. Here, we employed a cell model to demonstrate that the morphology of the hierar… ▽ More The rising demand for high-performing batteries requires new technological concepts. To facilitate fast charge and discharge, hierarchically structured electrodes offer short diffusion paths in the active material. However, there are still gaps in understanding the influences on the cell performance of such electrodes. Here, we employed a cell model to demonstrate that the morphology of the hierarchically structured electrode determines which electrochemical processes dictate the cell performance. The potentially limiting processes include electronic conductivity within the porous secondary particles, solid diffusion within the primary particles, and ionic transport in the electrolyte surrounding the secondary particles. Our insights enable a goal-oriented tailoring of hierarchically structured electrodes for high-power applications. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Organic molecules as origin of visible-range single photon emission from hexagonal boron nitride and mica

Authors: Michael Neumann, Xu Wei, Luis Morales-Inostroza, Seunghyun Song, Sung-Gyu Lee, Kenji Watanabe, Takashi Taniguchi, Stephan Götzinger, Young Hee Lee

Abstract: The discovery of room-temperature single-photon emitters (SPEs) hosted by two-dimensional hexagonal boron nitride (2D hBN) has sparked intense research interest. Although emitters in the vicinity of 2 eV have been studied extensively, their microscopic identity has remained elusive. The discussion of this class of SPEs has centered on point defects in the hBN crystal lattice, but none of the candi… ▽ More The discovery of room-temperature single-photon emitters (SPEs) hosted by two-dimensional hexagonal boron nitride (2D hBN) has sparked intense research interest. Although emitters in the vicinity of 2 eV have been studied extensively, their microscopic identity has remained elusive. The discussion of this class of SPEs has centered on point defects in the hBN crystal lattice, but none of the candidate defect structures have been able to capture the great heterogeneity in emitter properties that is observed experimentally. Employing a widely used sample preparation protocol but disentangling several confounding factors, we demonstrate conclusively that heterogeneous single-photon emission ~2 eV associated with hBN originates from organic molecules, presumably aromatic fluorophores. The appearance of those SPEs depends critically on the presence of organic processing residues during sample preparation, and emitters formed during heat treatment are not located within the hBN crystal as previously thought, but at the hBN/substrate interface. We further demonstrate that the same class of SPEs can be observed in a different 2D insulator, fluorophlogopite mica. △ Less

Submitted 21 June, 2023; originally announced June 2023.

Comments: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in ACS Nano, copyright © 2023 American Chemical Society after peer review. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acsnano.3c02348

Unveiling the impact of crosslinking redox-active polymers on their electrochemical behavior by 3D imaging and statistical microstructure analysis

Authors: Marten Ademmer, Po-Hua Su, Lukas Dodell, Jakob Asenbauer, Markus Osenberg, André Hilger, Jeng-Kuei Chang, Ingo Manke, Matthias Neumann, Volker Schmidt, Dominic Bresser

Abstract: Polymer-based batteries offer potentially higher power densities and a smaller ecological footprint compared to state-of-the-art lithium-ion batteries comprising inorganic active materials. However, in order to benefit from this potential advantages, further research to find suitable material compositions is required. In the present paper, we compare two different electrode composites of poly(2,2,… ▽ More Polymer-based batteries offer potentially higher power densities and a smaller ecological footprint compared to state-of-the-art lithium-ion batteries comprising inorganic active materials. However, in order to benefit from this potential advantages, further research to find suitable material compositions is required. In the present paper, we compare two different electrode composites of poly(2,2,6,6-tetramethylpiperidinyloxy-4-ylmethacrylate) (PTMA) and CMK-8, one produced with and one without crosslinking the PTMA. The influence of both approaches on the corresponding electrodes is comparatively investigated using electrochemical measurements and statistical 3D microstructure analysis based on synchrotron X-ray tomography. A particular focus is put on the local heterogeneity in the coating and how the crosslinking influences the interaction between PTMA and CMK-8. It is shown that crosslinked PTMA--compared to its non-crosslinked counterpart--exhibits a more heterogeneous microstructure and, furthermore, leads to better surface coverage of CMK-8, larger pores and shorter transportation pathways through the latter. These changes improve the electrochemical properties of the electrode. △ Less

Submitted 21 June, 2023; originally announced June 2023.

Comments: 43 pages, 13 figures

MSC Class: 62P35; 62H35

Scaling functions of the three-dimensional $Z(2)$, $O(2)$ and $O(4)$ models and their finite size dependence in an external field

Authors: Frithjof Karsch, Marius Neumann, Mugdha Sarkar

Abstract: We analyze scaling functions in the $3$-$d$, $Z(2)$, $O(2)$ and $O(4)$ universality classes and their finite size dependence using Monte Carlo simulations of improved $φ^4$ models. Results for the scaling functions are fitted to the Widom-Griffiths form, using a parametrization also used in analytic calculations. We find good agreement on the level of scaling functions and the location of maxima i… ▽ More We analyze scaling functions in the $3$-$d$, $Z(2)$, $O(2)$ and $O(4)$ universality classes and their finite size dependence using Monte Carlo simulations of improved $φ^4$ models. Results for the scaling functions are fitted to the Widom-Griffiths form, using a parametrization also used in analytic calculations. We find good agreement on the level of scaling functions and the location of maxima in the universal part of susceptibilities. We also find that an earlier parametrization of the $O(4)$ scaling function, using 14 parameters, is well reproduced when using the Widom-Griffiths form with only three parameters. We furthermore show that finite size corrections to the scaling functions are distinctively different in the $Z(2)$ and $O(N)$ universality classes and determine the volume dependence of the peak locations in order parameter and mixed susceptibilities. △ Less

Submitted 17 July, 2023; v1 submitted 4 April, 2023; originally announced April 2023.

Comments: 15 pages, 8 figures, accepted version

Journal ref: Phys. Rev. D 108, 014505 (2023)

Role of the single-particle dynamics in the transverse current autocorrelation function of a liquid metal

Authors: Eleonora Guarini, Ubaldo Bafile, Daniele Colognesi, Alessandro Cunsolo, Alessio De Francesco, Ferdinando Formisano, Wouter Montfrooij, Martin Neumann, Fabrizio Barocchi

Abstract: A very recent simulation study of the transverse current autocorrelation of the Lennard-Jones fluid revealed, as expected, that this function can be perfectly described within the exponential expansion theory. However, above a certain wavevector $Q$, not only transverse collective excitations are found to propagate in the fluid, but a second oscillatory component of unclear origin (thereby called… ▽ More A very recent simulation study of the transverse current autocorrelation of the Lennard-Jones fluid revealed, as expected, that this function can be perfectly described within the exponential expansion theory. However, above a certain wavevector $Q$, not only transverse collective excitations are found to propagate in the fluid, but a second oscillatory component of unclear origin (thereby called X) must be considered to properly account for the time behavior of the correlation. Here we present an extended investigation of the transverse current autocorrelation of liquid Au as obtained by ab initio molecular dynamics in the very wide range 5.7 nm$^{-1}$ $\le Q \le$ 32.8 nm$^{-1}$ in order to follow the behavior of the X component, if present, also at large $Q$ values. By combining the study of the transverse current autocorrelation with the analogous analysis of its self part, we show that the second oscillatory component originates from the longitudinal dynamics and appears in the same form as a collective excitation is represented in the single-particle behavior. Therefore, the signature of the longitudinal processes (sound waves) in the transverse current autocorrelation is not due to often conjectured couplings of longitudinal and trasverse modes, but descends from the self part of the function, which contains the traces of all processes acting in the fluid as the density of states, that is the spectrum of the velocity autocorrelation function, does. △ Less

Submitted 11 February, 2023; originally announced February 2023.

Spectral signatures of a unique charge density wave in Ta$_2$NiSe$_7$

Authors: Matthew D. Watson, Alex Louat, Cephise Cacho, Sungkyun Choi, Young Hee Lee, Michael Neumann, Gideok Kim

Abstract: Charge Density Waves (CDW) are commonly associated with the presence of near-Fermi level states which are separated from others, or "nested", by a wavector of $\mathbf{q}$. Here we use Angle-Resolved Photo Emission Spectroscopy (ARPES) on the CDW material Ta$_2$NiSe$_7$ and identify a total absence of any plausible nesting of states at the primary CDW wavevector $\mathbf{q}$. Nevertheless we obser… ▽ More Charge Density Waves (CDW) are commonly associated with the presence of near-Fermi level states which are separated from others, or "nested", by a wavector of $\mathbf{q}$. Here we use Angle-Resolved Photo Emission Spectroscopy (ARPES) on the CDW material Ta$_2$NiSe$_7$ and identify a total absence of any plausible nesting of states at the primary CDW wavevector $\mathbf{q}$. Nevertheless we observe spectral intensity on replicas of the hole-like valence bands, shifted by a wavevector of $\mathbf{q}$, which appears with the CDW transition. In contrast, we find that there is a possible nesting at $\mathbf{2q}$, and associate the characters of these bands with the reported atomic modulations at $\mathbf{2q}$. Our comprehensive electronic structure perspective shows that the CDW-like transition of Ta$_2$NiSe$_7$ is unique, with the primary wavevector $\mathbf{q}$ being unrelated to any low-energy states, but suggests that the reported modulation at $\mathbf{2q}$, which would plausibly connect low-energy states, might be more important for the overall energetics of the problem. △ Less

Submitted 9 June, 2023; v1 submitted 2 October, 2022; originally announced October 2022.

Journal ref: Nat Commun 14, 3388 (2023).

Quantitative comparison of different approaches for reconstructing the carbon-binder domain from tomographic image data of cathodes in lithium-ion batteries and its influence on electrochemical properties

Authors: Benedikt Prifling, Matthias Neumann, Simon Hein, Timo Danner, Emanuel Heider, Alice Hoffmann, Philipp Rieder, André Hilger, Markus Osenberg, Ingo Manke, Margret Wohlfahrt-Mehrens, Arnulf Latz, Volker Schmidt

Abstract: It is well known that the spatial distribution of the carbon-binder domain (CBD) offers a large potential to further optimize lithium-ion batteries. However, it is challenging to reconstruct the CBD from tomographic image data obtained by synchrotron tomography. In the present paper, we consider several approaches to segment 3D image data of two different cathodes into three phases, namely active… ▽ More It is well known that the spatial distribution of the carbon-binder domain (CBD) offers a large potential to further optimize lithium-ion batteries. However, it is challenging to reconstruct the CBD from tomographic image data obtained by synchrotron tomography. In the present paper, we consider several approaches to segment 3D image data of two different cathodes into three phases, namely active material, CBD and pores. More precisely, we focus on global thresholding, a local closing approach based on EDX data, a k-means clustering method, and a procedure based on a neural network that has been trained by correlative microscopy, i.e., based on data gained by synchrotron tomography and FIB-SEM data representing the same electrode. We quantify the impact of the considered segmentation approaches on morphological characteristics as well as on the resulting performance by spatially-resolved transport simulations. Furthermore, we use experimentally determined electrochemical properties to identify an appropriate range for the effective transport parameter of the CBD. The developed methodology is applied to two differently manufactured cathodes, namely an ultra-thick unstructured cathode and a two-layer cathode with varying CBD content in both layers. This comparison elucidates the impact of a specific structuring concept on the 3D microstructure of cathodes. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Comments: 35 pages and 19 figures

Classification of FIB/SEM-tomography images for highly porous multiphase materials using random forest classifiers

Authors: Markus Osenberg, André Hilger, Matthias Neumann, Amalia Wagner, Nicole Bohn, Joachim R. Binder, Volker Schmidt, John Banhart, Ingo Manke

Abstract: FIB/SEM tomography represents an indispensable tool for the characterization of three-dimensional nanostructures in battery research and many other fields. However, contrast and 3D classification/reconstruction problems occur in many cases, which strongly limits the applicability of the technique especially on porous materials, like those used for electrode materials in batteries or fuel cells. Di… ▽ More FIB/SEM tomography represents an indispensable tool for the characterization of three-dimensional nanostructures in battery research and many other fields. However, contrast and 3D classification/reconstruction problems occur in many cases, which strongly limits the applicability of the technique especially on porous materials, like those used for electrode materials in batteries or fuel cells. Distinguishing the different components like active Li storage particles and carbon/binder materials is difficult and often prevents a reliable quantitative analysis of image data, or may even lead to wrong conclusions about structure-property relationships. In this contribution, we present a novel approach for data classification in three-dimensional image data obtained by FIB/SEM tomography and its applications to NMC battery electrode materials. We use two different image signals, namely the signal of the angled SE2 chamber detector and the Inlens detector signal, combine both signals and train a random forest, i.e. a particular machine learning algorithm. We demonstrate that this approach can overcome current limitations of existing techniques suitable for multi-phase measurements and that it allows for quantitative data reconstruction even where current state-of the art techniques fail, or demand for large training sets. This approach may yield as guideline for future research using FIB/SEM tomography. △ Less

Submitted 28 July, 2022; originally announced July 2022.

Onset of two collective excitations in the transverse dynamics of a simple fluid

Authors: Eleonora Guarini, Martin Neumann, Alessio De Francesco, Ferdinando Formisano, Alessandro Cunsolo, Wouter Montfrooij, Daniele Colognesi, Ubaldo Bafile

Abstract: A thorough analysis of the transverse current autocorrelation function obtained by molecular dynamics simulations of a dense Lennard-Jones fluid reveals that even such a simple system is characterized by a varied dynamical behavior with changing length scale. By using the exponential expansion theory, we provide a full account of the time correlation at wavevectors $Q$ between the upper boundary o… ▽ More A thorough analysis of the transverse current autocorrelation function obtained by molecular dynamics simulations of a dense Lennard-Jones fluid reveals that even such a simple system is characterized by a varied dynamical behavior with changing length scale. By using the exponential expansion theory, we provide a full account of the time correlation at wavevectors $Q$ between the upper boundary of the hydrodynamic region and $Q_p/2$, with $Q_p$ the position of the main peak of the static structure factor. In the $Q$ range studied we identify and accurately locate the wavevector at which shear wave propagation starts to take place, and show clearly how this phenomenon may be represented by a damped harmonic oscillator changing, in a continuous way, from an overdamped to an underdamped condition. The decomposition into exponential modes allows one to convincingly establish not only the crossover related to the onset of transverse waves but, surprisingly, also the existence of a second pair of modes equivalent to another oscillator that undergoes, at higher $Q$ values, a similarly smooth over- to underdamped transition. △ Less

Submitted 22 June, 2022; originally announced June 2022.

Comments: 6 pages and 4 figures in main text, 6 pages and 3 figures in supplementary material

Asymptotic properties of one-layer artificial neural networks with sparse connectivity

Authors: Christian Hirsch, Matthias Neumann, Volker Schmidt

Abstract: A law of large numbers for the empirical distribution of parameters of a one-layer artificial neural networks with sparse connectivity is derived for a simultaneously increasing number of both, neurons and training iterations of the stochastic gradient descent. A law of large numbers for the empirical distribution of parameters of a one-layer artificial neural networks with sparse connectivity is derived for a simultaneously increasing number of both, neurons and training iterations of the stochastic gradient descent. △ Less

Submitted 9 December, 2021; v1 submitted 1 December, 2021; originally announced December 2021.

Comments: 12 pages, 4 figures

MSC Class: 60D05; 60G55; 68T07

Deterministic photon storage and readout in a semimagnetic quantum-dot--cavity system doped with a single Mn ion

Authors: M. Cosacchi, T. Seidelmann, A. Mielnik-Pyszczorski, M. Neumann, T. K. Bracht, M. Cygorek, A. Vagov, D. E. Reiter, V. M. Axt

Abstract: Light trap** is a crucial mechanism for synchronization in optical communication. Especially on the level of single photons, control of the exact emission time is desirable. In this paper, we theoretically propose a single-photon buffering device composed of a quantum dot doped with a single Mn atom in a cavity. We present a method to detain a single cavity photon as an excitation of the dot. Th… ▽ More Light trap** is a crucial mechanism for synchronization in optical communication. Especially on the level of single photons, control of the exact emission time is desirable. In this paper, we theoretically propose a single-photon buffering device composed of a quantum dot doped with a single Mn atom in a cavity. We present a method to detain a single cavity photon as an excitation of the dot. The storage scheme is based on bright to dark exciton conversion performed with an off-resonant external optical field and mediated via a spin-flip with the magnetic ion. The induced Stark shift brings both exciton states to resonance and results in an excitation transfer to the optically inactive one. The stored photon can be read out on demand in the same manner by repopulating the bright state, which has a short lifetime. Our results indicate the possibility to suspend a photon for almost two orders of magnitude longer than the lifetime of the bright exciton. △ Less

Submitted 9 February, 2022; v1 submitted 14 October, 2021; originally announced October 2021.

Comments: 13 pages, 6 figures

Journal ref: Adv. Quantum Technol. 2100131 (2022)

The optical Stark shift to control the dark exciton occupation of a quantum dot in a tilted magnetic field

Authors: Miriam Neumann, Florian Kappe, Thomas K. Bracht, Michael Cosacchi, Tim Seidelmann, Vollrath Martin Axt, Gregor Weihs, Doris E. Reiter

Abstract: When a detuned and strong laser pulse acts on an optical transition, a Stark shift of the corresponding energies occurs. We analyze how this optical Stark effect can be used to prepare and control the dark exciton occupation in a semiconductor quantum dot. The coupling between the bright and dark exciton states is facilitated by an external magnetic field. Using sequences of laser pulses, we show… ▽ More When a detuned and strong laser pulse acts on an optical transition, a Stark shift of the corresponding energies occurs. We analyze how this optical Stark effect can be used to prepare and control the dark exciton occupation in a semiconductor quantum dot. The coupling between the bright and dark exciton states is facilitated by an external magnetic field. Using sequences of laser pulses, we show how the dark exciton and different superposition states can be prepared. We give simple analytic formulas, which yield a good estimate for optimal preparation parameters. The preparation scheme is quite robust against the influence of acoustic phonons. We further discuss the experimental feasibility of the used Stark pulses. Giving a clear physical picture our results will stimulate the usage of dark excitons in schemes to generate photons from quantum dots. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Comments: 10 pages, 6 figures

Journal ref: Phys. Rev. B 104, 075428 (2021)

Uncovering Phase Change Memory Energy Limits by Sub-Nanosecond Probing of Power Dissipation Dynamics

Authors: Keren Stern, Nicolás Wainstein, Yair Keller, Christopher M. Neumann, Eric Pop, Shahar Kvatinsky, Eilam Yalon

Abstract: Phase change memory (PCM) is one of the leading candidates for neuromorphic hardware and has recently matured as a storage class memory. Yet, energy and power consumption remain key challenges for this technology because part of the PCM device must be self-heated to its melting temperature during reset. Here, we show that this reset energy can be reduced by nearly two orders of magnitude by minimi… ▽ More Phase change memory (PCM) is one of the leading candidates for neuromorphic hardware and has recently matured as a storage class memory. Yet, energy and power consumption remain key challenges for this technology because part of the PCM device must be self-heated to its melting temperature during reset. Here, we show that this reset energy can be reduced by nearly two orders of magnitude by minimizing the pulse width. We utilize a high-speed measurement setup to probe the energy consumption in PCM cells with varying pulse width (0.3 to 40 nanoseconds) and uncover the power dissipation dynamics. A key finding is that the switching power (P) remains unchanged for pulses wider than a short thermal time constant of the PCM ($τ$$_t$$_h$ < 1 ns in 50 nm diameter device), resulting in a decrease of energy (E=P$τ$) as the pulse width $τ$ is reduced in that range. In other words, thermal confinement during short pulses is achieved by limiting the heat diffusion time. Our improved programming scheme reduces reset energy density below 0.1 nJ/$μ$m$^2$, over an order of magnitude lower than state-of-the-art PCM, potentially changing the roadmap of future data storage technology and paving the way towards energy-efficient neuromorphic hardware △ Less

Submitted 2 May, 2021; v1 submitted 23 April, 2021; originally announced April 2021.

Journal ref: Adv. Electron. Mater. 7, 2100217 (2021)

Graphene-Based Electromechanical Thermal Switches

Authors: Michelle E. Chen, Miguel Muñoz Rojo, Feifei Lian, Justin Koeln, Aditya Sood, Stephanie M. Bohaichuk, Christopher M. Neumann, Sarah G. Garrow, Andrew G. Alleyne, Kenneth E. Goodson, Eric Pop

Abstract: Thermal management is an important challenge in modern electronics, avionics, automotive, and energy storage systems. While passive thermal solutions (like heat sinks or heat spreaders) are often used, actively modulating heat flow (e.g. via thermal switches or diodes) would offer additional degrees of control over the management of thermal transients and system reliability. Here we report the fir… ▽ More Thermal management is an important challenge in modern electronics, avionics, automotive, and energy storage systems. While passive thermal solutions (like heat sinks or heat spreaders) are often used, actively modulating heat flow (e.g. via thermal switches or diodes) would offer additional degrees of control over the management of thermal transients and system reliability. Here we report the first thermal switch based on a flexible, collapsible graphene membrane, with low operating voltage, < 2 V. We also employ active-mode scanning thermal microscopy (SThM) to measure the device behavior and switching in real time. A compact analytical thermal model is developed for the general case of a thermal switch based on a double-clamped suspended membrane, highlighting the thermal and electrical design challenges. System-level modeling demonstrates the thermal trade-offs between modulating temperature swing and average temperature as a function of switching ratio. These graphene-based thermal switches present new opportunities for active control of fast (even nanosecond) thermal transients in densely integrated systems. △ Less

Submitted 21 November, 2020; originally announced November 2020.

Engineering Thermal and Electrical Interface Properties of Phase Change Memory with Monolayer MoS2

Authors: Christopher M. Neumann, Kye L. Okabe, Eilam Yalon, Ryan W. Grady, H. -S. Philip Wong, Eric Pop

Abstract: Phase change memory (PCM) is an emerging data storage technology, however its programming is thermal in nature and typically not energy-efficient. Here we reduce the switching power of PCM through the combined approaches of filamentary contacts and thermal confinement. The filamentary contact is formed through an oxidized TiN layer on the bottom electrode, and thermal confinement is achieved using… ▽ More Phase change memory (PCM) is an emerging data storage technology, however its programming is thermal in nature and typically not energy-efficient. Here we reduce the switching power of PCM through the combined approaches of filamentary contacts and thermal confinement. The filamentary contact is formed through an oxidized TiN layer on the bottom electrode, and thermal confinement is achieved using a monolayer semiconductor interface, three-atom thick MoS2. The former reduces the switching volume of the phase change material and yields a 70% reduction in reset current versus typical 150 nm diameter mushroom cells. The enhanced thermal confinement achieved with the ultra-thin (~6 Å) MoS2 yields an additional 30% reduction in switching current and power. We also use detailed simulations to show that further tailoring the electrical and thermal interfaces of such PCM cells toward their fundamental limits could lead up to a six-fold benefit in power efficiency. △ Less

Submitted 1 March, 2019; originally announced March 2019.

Characterization of the 3D microstructure of Ibuprofen tablets by means of synchrotron tomography

Authors: Matthias Neumann, Ramon Cabiscol, Markus Osenberg, Henning Markötter, Ingo Manke, Jan-Henrik Finke, Volker Schmidt

Abstract: We present a methodology to characterize the 3D microstructure of Ibuprofen tablets, which strongly influences the strength and solubility kinetics of the final formulation, by means of synchrotron tomography. A physically coherent trinarization for greyscale images of Ibuprofen tablets consisting of the three phases microcrystalline cellulose, Ibuprofen and pores is presented. For this purpose, a… ▽ More We present a methodology to characterize the 3D microstructure of Ibuprofen tablets, which strongly influences the strength and solubility kinetics of the final formulation, by means of synchrotron tomography. A physically coherent trinarization for greyscale images of Ibuprofen tablets consisting of the three phases microcrystalline cellulose, Ibuprofen and pores is presented. For this purpose, a hybrid approach is developed combining a trinarization by means of statistical learning with a trinarization based on a watershed algorithm. This hybrid approach allows us to compute microstructure characteristics of tablets using image analysis. A comparison with experimental results shows that there is a significant amount of pores which is below the resolution limit and results from image analysis let us conjecture that these pores make up the major part of the surface between pores and solid. Furthermore, we compute microstructure characteristics, which are experimentally not accessible such as local percolation probabilities and chord length distribution functions. Both characteristics are meaningful in order to quantify the influence of tablet compaction on its microstructure. The presented approach can be used to get better insights into the relationship between production parameters and microstructure characteristics based on 3D image data of Ibuprofen tablets manufactured under different conditions. △ Less

Submitted 12 June, 2018; originally announced June 2018.

Comments: 20 pages, 8 figures

Journal ref: Journal of Microscopy (274), p. 102-113, 2019

Temperature Dependent Thermal Boundary Conductance of Monolayer MoS$_2$ by Raman Thermometry

Authors: Eilam Yalon, Özgür Burak Aslan, Kirby K. H. Smithe, Connor J. McClellan, Saurabh V. Suryavanshi, Feng Xiong, Aditya Sood, Christopher M. Neumann, Xiaoqing Xu, Kenneth E. Goodson, Tony F. Heinz, Eric Pop

Abstract: The electrical and thermal behavior of nanoscale devices based on two-dimensional (2D) materials is often limited by their contacts and interfaces. Here we report the temperature-dependent thermal boundary conductance (TBC) of monolayer MoS$_2$ with AlN and SiO$_2$, using Raman thermometry with laser-induced heating. The temperature-dependent optical absorption of the 2D material is crucial in suc… ▽ More The electrical and thermal behavior of nanoscale devices based on two-dimensional (2D) materials is often limited by their contacts and interfaces. Here we report the temperature-dependent thermal boundary conductance (TBC) of monolayer MoS$_2$ with AlN and SiO$_2$, using Raman thermometry with laser-induced heating. The temperature-dependent optical absorption of the 2D material is crucial in such experiments, which we characterize here for the first time above room temperature. We obtain TBC ~ 15 MWm$^-$$^2$K$^-$$^1$ near room temperature, increasing as ~ T$^0$$^.$$^6$$^5$ in the range 300 - 600 K. The similar TBC of MoS$_2$ with the two substrates indicates that MoS$_2$ is the "softer" material with weaker phonon irradiance, and the relatively low TBC signifies that such interfaces present a key bottleneck in energy dissipation from 2D devices. Our approach is needed to correctly perform Raman thermometry of 2D materials, and our findings are key for understanding energy coupling at the nanoscale. △ Less

Submitted 8 February, 2020; v1 submitted 20 October, 2017; originally announced October 2017.

Journal ref: ACS Applied Materials & Interfaces (2017)

Spatially Resolved Thermometry of Resistive Memory Devices

Authors: Eilam Yalon, Sanchit Deshmukh, Miguel Muñoz Rojo, Feifei Lian, Christopher M. Neumann, Feng Xiong, Eric Pop

Abstract: The operation of resistive and phase-change memory (RRAM and PCM) is controlled by highly localized self-heating effects, yet detailed studies of their temperature are rare due to challenges of nanoscale thermometry. Here we show that the combination of Raman thermometry and scanning thermal microscopy (SThM) can enable such measurements with high spatial resolution. We report temperature-dependen… ▽ More The operation of resistive and phase-change memory (RRAM and PCM) is controlled by highly localized self-heating effects, yet detailed studies of their temperature are rare due to challenges of nanoscale thermometry. Here we show that the combination of Raman thermometry and scanning thermal microscopy (SThM) can enable such measurements with high spatial resolution. We report temperature-dependent Raman spectra of HfO$_2$, TiO$_2$ and Ge$_2$Sb$_2$Te$_5$ (GST) films, and demonstrate direct measurements of temperature profiles in lateral PCM devices. Our measurements reveal that electrical and thermal interfaces dominate the operation of such devices, uncovering a thermal boundary resistance of 30 m$^2$K$^{-1}$GW$^{-1}$ at GST-SiO$_2$ interfaces and an effective thermopower 350 $μ$V/K at GST-Pt interfaces. We also discuss possible pathways to apply Raman thermometry and SThM techniques to nanoscale and vertical resistive memory devices. △ Less

Submitted 7 June, 2017; originally announced June 2017.

Crystal growth and characterization of the pyrochlore Tb$_2$Ti$_2$O$_7$

Authors: D. Klimm, C. Guguschev, D. J. Kok, M. Naumann, L. Ackermann, D. Rytz, M. Peltz, K. Dupré, M. D. Neumann, A. Kwasniewski, D. G. Schlom, M. Bickermann

Abstract: Terbium titanate (Tb$_2$Ti$_2$O$_7$) is a spin-ice material with remarkable magneto-optical properties. It has a high Verdet constant and is a promising substrate crystal for the epitaxy of quantum materials with the pyrochlore structure. Large single crystals with adequate quality of Tb$_2$Ti$_2$O$_7$ or any pyrochlore are not available so far. Here we report the growth of high-quality bulk cryst… ▽ More Terbium titanate (Tb$_2$Ti$_2$O$_7$) is a spin-ice material with remarkable magneto-optical properties. It has a high Verdet constant and is a promising substrate crystal for the epitaxy of quantum materials with the pyrochlore structure. Large single crystals with adequate quality of Tb$_2$Ti$_2$O$_7$ or any pyrochlore are not available so far. Here we report the growth of high-quality bulk crystals using the Czochralski method to pull crystals from the melt. Prior work using the automated Czochralski method has suffered from growth instabilities like diameter fluctuation, foot formation and subsequent spiraling shortly after the seeding stage. In this study, the volumes of the crystals were strongly increased to several cubic centimeters by means of manual growth control, leading to crystal diameters up to 40 mm and crystal lengths up to 10 mm. Rocking curve measurements revealed full width at half maximum values between 28 and 40" for 222 reflections. The specific heat capacity c$_p$ was measured between room temperature and 1573 K by dynamic differential scanning calorimetry and shows the typical slow parabolic rise. In contrast, the thermal conductivity κ(T) shows a minimum near 700 K and increases at higher temperature T. Optical spectroscopy was performed at room temperature from the ultraviolet to the near infrared region, and additionally in the near infrared region up to 1623 K. The optical transmission properties and the crystal color are interpreted to be influenced by partial oxidation of Tb$^{3+}$ to Tb$^{4+}$. △ Less

Submitted 20 June, 2017; v1 submitted 18 May, 2017; originally announced May 2017.

Comments: 7 pages, 7 figures, accepted for CrystEngComm

Journal ref: CrystEngComm 19 (2017) 3908-3914

Energy Dissipation in Monolayer MoS$_2$ Electronics

Authors: Eilam Yalon, Connor J. McClellan, Kirby K. H. Smithe, Miguel Muñoz Rojo, Runjie, Xu, Saurabh V. Suryavanshi, Alex J. Gabourie, Christopher M. Neumann, Feng Xiong, Amir B. Farimani, Eric Pop

Abstract: The advancement of nanoscale electronics has been limited by energy dissipation challenges for over a decade. Such limitations could be particularly severe for two-dimensional (2D) semiconductors integrated with flexible substrates or multi-layered processors, both being critical thermal bottlenecks. To shed light into fundamental aspects of this problem, here we report the first direct measuremen… ▽ More The advancement of nanoscale electronics has been limited by energy dissipation challenges for over a decade. Such limitations could be particularly severe for two-dimensional (2D) semiconductors integrated with flexible substrates or multi-layered processors, both being critical thermal bottlenecks. To shed light into fundamental aspects of this problem, here we report the first direct measurement of spatially resolved temperature in functioning 2D monolayer MoS$_2$ transistors. Using Raman thermometry we simultaneously obtain temperature maps of the device channel and its substrate. This differential measurement reveals the thermal boundary conductance (TBC) of the MoS$_2$ interface (14 $\pm$ 4 MWm$^-$$^2$K$^-$$^1$) is an order magnitude larger than previously thought, yet near the low end of known solid-solid interfaces. Our study also reveals unexpected insight into non-uniformities of the MoS$_2$ transistors (small bilayer regions), which do not cause significant self-heating, suggesting that such semiconductors are less sensitive to inhomogeneity than expected. These results provide key insights into energy dissipation of 2D semiconductors and pave the way for the future design of energy-efficient 2D electronics. △ Less

Submitted 26 April, 2017; originally announced April 2017.

Journal ref: Nano Letters (2017)

Density of states and dynamical crossover in a dense fluid revealed by exponential mode analysis of the velocity autocorrelation function

Authors: S. Bellissima, M. Neumann, E. Guarini, U. Bafile, F. Barocchi

Abstract: Extending a previous study of the velocity autocorrelation function (VAF) in a simulated Lennard-Jones fluid to cover higher-density and lower-temperature states, we show that the recently demonstrated multiexponential expansion allows for a full account and understanding of the dynamical processes encompassed by a fundamental quantity as the VAF. In particular, besides obtaining evidence of a per… ▽ More Extending a previous study of the velocity autocorrelation function (VAF) in a simulated Lennard-Jones fluid to cover higher-density and lower-temperature states, we show that the recently demonstrated multiexponential expansion allows for a full account and understanding of the dynamical processes encompassed by a fundamental quantity as the VAF. In particular, besides obtaining evidence of a persisting long-time tail, we assign specific and unambiguous physical meanings to groups of exponential modes related to the longitudinal and transverse collective dynamics, respectively. We have made this possible by consistently introducing the interpretation of the VAF frequency spectrum as a global density of states in fluids, generalizing a solid-state concept, and by giving to specific spectral components, obtained via the VAF exponential expansion, the corresponding meaning of partial densities of states relative to specific dynamical processes. The clear identification of a high-frequency oscillation of the VAF with the near-top excitation frequency in the dispersion curve of acoustic waves is a neat example of the power of the method. As for the transverse mode contribution, its analysis turns out to be particularly important, because the multiexponential expansion reveals a transition marking the onset of propagating excitations when the density is increased above a threshold value. While this finding agrees with recent literature debating the issue of dynamical crossover boundaries, such as the one identified with the Frenkel line, we can add detailed information on the modes involved in this specific process in the domains of both time and frequency. This will help obtain a still missing full account of transverse dynamics, in its nonpropagating and propagating aspects which are linked by dynamical transitions depending on both the thermodynamic states and the excitation wavevectors. △ Less

Submitted 19 October, 2016; originally announced October 2016.

Journal ref: Phys. Rev. E 95, 012108 (2017)

Non-equilibrium simulations of thermally induced electric fields in water

Authors: Peter Wirnsberger, Domagoj Fijan, Anđela Šarić, Martin Neumann, Christoph Dellago, Daan Frenkel

Abstract: Using non-equilibrium molecular dynamics simulations, it has been recently demonstrated that water molecules align in response to an imposed temperature gradient, resulting in an effective electric field. Here, we investigate how thermally induced fields depend on the underlying treatment of long-ranged interactions. For the short-ranged Wolf method and Ewald summation, we find the peak strength o… ▽ More Using non-equilibrium molecular dynamics simulations, it has been recently demonstrated that water molecules align in response to an imposed temperature gradient, resulting in an effective electric field. Here, we investigate how thermally induced fields depend on the underlying treatment of long-ranged interactions. For the short-ranged Wolf method and Ewald summation, we find the peak strength of the field to range between $2 \times 10^7$ and $5 \times 10^7~\text{V/m}$ for a temperature gradient of $5.2~\text{K/}\unicode{x212B}$. Our value for the Wolf method is therefore an order of magnitude lower than the literature value [J. Chem. Phys. 139, 014504 (2013) and 143, 036101 (2015)]. We show that this discrepancy can be traced back to the use of an incorrect kernel in the calculation of the electrostatic field. More seriously, we find that the Wolf method fails to predict correct molecular orientations, resulting in dipole densities with opposite sign to those computed using Ewald summation. By considering two different multipole expansions, we show that, for inhomogeneous polarisations, the quadrupole contribution can be significant and even outweigh the dipole contribution to the field. Finally, we propose a more accurate way of calculating the electrostatic potential and the field. In particular, we show that averaging the microscopic field analytically to obtain the macroscopic Maxwell field reduces the error bars by up to an order of magnitude. As a consequence, the simulation times required to reach a given statistical accuracy decrease by up to two orders of magnitude. △ Less

Submitted 8 August, 2016; v1 submitted 8 February, 2016; originally announced February 2016.

Comments: 17 pages, 11 figures, link to supplementary material

Journal ref: J. Chem. Phys. 144, 224102 (2016)

On the Humble Origins of the Brownian Entropic Force

Authors: Richard M. Neumann

Abstract: Recognition that certain forces arising from the averaging of the multiple impacts of a solute particle by the surrounding solvent particles undergoing random thermal motion can be of an entropic nature has led to the incorporation of these forces and their related entropies into theoretical protocols ranging from molecular-dynamics simulations to the modeling of quarkonium suppression in particle… ▽ More Recognition that certain forces arising from the averaging of the multiple impacts of a solute particle by the surrounding solvent particles undergoing random thermal motion can be of an entropic nature has led to the incorporation of these forces and their related entropies into theoretical protocols ranging from molecular-dynamics simulations to the modeling of quarkonium suppression in particle physics. Here we present a rigorous derivation of this Brownian entropic force by means of the classical Gibbs canonical partition function and in so doing provide a heuristic demonstration of its kinetic origin. △ Less

Submitted 16 June, 2015; originally announced June 2015.

Comments: 6 pages, no figures

Velocity autocorrelation in liquid para-hydrogen by quantum simulations for first-principle computations of the neutron cross sections

Authors: E. Guarini, M. Neumann, U. Bafile, M. Celli, D. Colognesi, E. Farhi, Y. Calzavara

Abstract: Accurate knowledge of the single-molecule (self) translational dynamics of liquid para-H2 is an essential requirement for the calculation of the neutron scattering properties of this important quantum liquid. We show that, by using Centroid Molecular Dynamics (CMD) quantum simulations of the velocity autocorrelation function, calculations of the total neutron cross section (TCS) remarkably agree w… ▽ More Accurate knowledge of the single-molecule (self) translational dynamics of liquid para-H2 is an essential requirement for the calculation of the neutron scattering properties of this important quantum liquid. We show that, by using Centroid Molecular Dynamics (CMD) quantum simulations of the velocity autocorrelation function, calculations of the total neutron cross section (TCS) remarkably agree with experimental data at the thermal and epithermal incident neutron energies where para-H2 dynamics is actually dominated by the self contributions. This result shows that a proper account of the quantum nature of the fluid, as provided by CMD, is a necessary and very effective condition to obtain the correct absolute-scale cross section values directly from first-principle computations of the double differential cross section, and without the need of introducing any empirically adjusted quantity. At subthermal incident energies, appropriate modeling of the para-H2 intermolecular (distinct) dynamics also becomes crucial, but quantum simulations are not yet able to cope with it. Existing simple models which account for the distinct part provide an appropriate correction of self-only calculations and bring the computed results in reasonable accord with TCS experimental data available until very recently. However, if just published cross section measurements in the cold range are considered, the agreement turns out to be by far superior and very satisfactory. The possible origin of slight residual differences will be commented and suggest further computational and experimental efforts. Nonetheless, the ability to reproduce the total cross section in the wide range between 1 and 900 meV represents an encouraging and important validation step of the CMD method and of the present simple algorithm. △ Less

Submitted 14 May, 2015; originally announced May 2015.

Transport in Nanoribbon Interconnects Obtained from Graphene Grown by Chemical Vapor Deposition

Authors: Ashkan Behnam, Austin S. Lyons, Myung-Ho Bae, Edmond K. Chow, Sharnali Islam, Christopher M. Neumann, Eric Pop

Abstract: We study graphene nanoribbon (GNR) interconnects obtained from graphene grown by chemical vapor deposition (CVD). We report low- and high-field electrical measurements over a wide temperature range, from 1.7 to 900 K. Room temperature mobilities range from 100 to 500 cm2/V/s, comparable to GNRs from exfoliated graphene, suggesting that bulk defects or grain boundaries play little role in devices s… ▽ More We study graphene nanoribbon (GNR) interconnects obtained from graphene grown by chemical vapor deposition (CVD). We report low- and high-field electrical measurements over a wide temperature range, from 1.7 to 900 K. Room temperature mobilities range from 100 to 500 cm2/V/s, comparable to GNRs from exfoliated graphene, suggesting that bulk defects or grain boundaries play little role in devices smaller than the CVD graphene crystallite size. At high-field, peak current densities are limited by Joule heating, but a small amount of thermal engineering allows us to reach ~2 x 10^9 A/cm2, the highest reported for nanoscale CVD graphene interconnects. At temperatures below ~5 K, short GNRs act as quantum dots with dimensions comparable to their lengths, highlighting the role of metal contacts in limiting transport. Our study illustrates opportunities for CVD-grown GNRs, while revealing variability and contacts as remaining future challenges. △ Less

Submitted 2 September, 2012; originally announced September 2012.

Comments: Nano Letters (2012); supplement available online

Journal ref: Nano Letters vol. 12, pp. 4424-4430 (2012)

Effect of 3d-do** on the electronic structure of BaFe2As2

Authors: J. A. McLeod, A. Buling, R. J. Green, T. D. Boyko, N. A. Skorikov, E. Z. Kurmaev, M. Neumann, L. D. Finkelstein, N. Ni, A. Thaler, S. L. Bud'ko, P. C. Canfield, A. Moewes

Abstract: The electronic structure of BaFe2As2 doped with Co, Ni, and Cu has been studied by a variety of experimental and theoretical methods, but a clear picture of the dopant 3d states has not yet emerged. Herein we provide experimental evidence of the distribution of Co, Ni, and Cu 3d states in the valence band. We conclude that the Co and Ni 3d states provide additional free carriers to the Fermi level… ▽ More The electronic structure of BaFe2As2 doped with Co, Ni, and Cu has been studied by a variety of experimental and theoretical methods, but a clear picture of the dopant 3d states has not yet emerged. Herein we provide experimental evidence of the distribution of Co, Ni, and Cu 3d states in the valence band. We conclude that the Co and Ni 3d states provide additional free carriers to the Fermi level, while the Cu 3d states are found at the bottom of the valence band in a localized 3d10 shell. These findings help shed light on why superconductivity can occur in BaFe2As2 doped with Co and Ni but not Cu. △ Less

Submitted 11 April, 2012; originally announced April 2012.

Comments: 18 pages, 8 figures

Journal ref: J. Phys.: Condens. Matter, 24 215501 (2012)

Experimental Evidence of Cage Conduction Bands in Superconducting Cement 12CaO$\cdot$7Al$_2$O$_3$

Authors: J. A. McLeod, A. Buling, E. Z. Kurmaev, P. V. Sushko, M. Neumann, L. D. Finkelstein, S. -W. Kim, H. Hosono, A. Moewes

Abstract: Natural 12CaO$\cdot$7Al$_2$O$_3$ (C12A7) is a wide bandgap insulator, but conductivity can be realized by introducing oxygen deficiency. Currently, there are two competing models explaining conductivity in oxygen-deficient C12A7, one involving the electron transfer via a "cage conduction band" inside the nominal band gap, the other involving electron hop** along framework lattice sites. To help… ▽ More Natural 12CaO$\cdot$7Al$_2$O$_3$ (C12A7) is a wide bandgap insulator, but conductivity can be realized by introducing oxygen deficiency. Currently, there are two competing models explaining conductivity in oxygen-deficient C12A7, one involving the electron transfer via a "cage conduction band" inside the nominal band gap, the other involving electron hop** along framework lattice sites. To help resolve this debate, we probe insulating and conducting C12A7 with X-ray emission, X-ray absorption, and X-ray photoemission spectroscopy, which provide a full picture of both the valence and conduction band edges in these materials. These measurements suggest the existence of a narrow conduction band between the main conduction and valence bands common in both conducting and insulating C12A7 and support the theory that free electrons in oxygen-deficient C12A7 occupy the low-energy states of this narrow band. Our measurements are corroborated with density functional theory calculations. △ Less

Submitted 14 January, 2012; originally announced January 2012.

Comments: 20 pages, 6 figures

Journal ref: Phys. Rev. B 85, 045204 (2012)

Carbon States in Carbon-Encapsulated Nickel Nanoparticles Studied by Means of X-Ray Absorption, Emission, and Photoelectron Spectroscopies

Authors: V. R. Galakhov, A. Buling, M. Neumann, N. A. Ovechkina, A. S. Shkvarin, A. S. Semenova, M. A. Uimin, A. Ye. Yermakov, E. Z. Kurmaev, O. Y. Vilkov, D. W. Boukhvalov

Abstract: Electronic structure of nickel nanoparticles encapsulated in carbon was characterized by photoelectron, X-ray absorption, and X-ray emission spectroscopies. Experimental spectra are compared with the density of states calculated in the frame of the density functional theory. The carbon shell of Ni nanoparticles has been found to be multilayer graphene with significant (about 6%) amount of Stone--W… ▽ More Electronic structure of nickel nanoparticles encapsulated in carbon was characterized by photoelectron, X-ray absorption, and X-ray emission spectroscopies. Experimental spectra are compared with the density of states calculated in the frame of the density functional theory. The carbon shell of Ni nanoparticles has been found to be multilayer graphene with significant (about 6%) amount of Stone--Wales defects. Results of the experiments evidence protection of the metallic nanoparticles from the environmental degradation by providing a barrier against oxidation at least for two years. Exposure in air for 2 years leads to oxidation only of the carbon shell of Ni@C nanoparticles with coverage of functional groups. △ Less

Submitted 6 November, 2011; originally announced November 2011.

Comments: 16 pages, 6 figures, accepted in J. Phys. Chem. C

Journal ref: J. Phys. Chem. C, 2011, 115 (50), pp 24615-24620

The Role of Chain Entropy in an Analytic Model of Protein Binding in Single-DNA Stretching Experiments

Authors: Pui-Man Lam, Richard M. Neumann

Abstract: We show that the simple analytical model proposed by Zhang and Marko (Phys. Rev. E 77, 031916 (2008)) to illustrate Maxwell relations for single-DNA experiments can be improved by including the zero-force entropy of a Gaussian chain. The resulting model is in excellent agreement with the discrete persistent-chain model and is in a form convenient for analyzing experimental data. We show that the simple analytical model proposed by Zhang and Marko (Phys. Rev. E 77, 031916 (2008)) to illustrate Maxwell relations for single-DNA experiments can be improved by including the zero-force entropy of a Gaussian chain. The resulting model is in excellent agreement with the discrete persistent-chain model and is in a form convenient for analyzing experimental data. △ Less

Submitted 8 September, 2011; originally announced September 2011.

Comments: 10 pages, 4 figures

Journal ref: Physical Review E84, 032901 (2011)

Electronic structure of CaFe2As2: Contribution of itinerant Fe 3d-states to the Fermi Level

Authors: E. Z. Kurmaev, J. A. McLeod, A. Buling, N. A. Skorikov, A. Moewes, M. Neumann, M. A. Korotin, Yu. A. Izyumov, N. Ni, P. C. Canfield

Abstract: We present density functional theory (DFT) calculations and a full set of X-ray spectra (resonant inelastic X-ray scattering and X-ray photoelectron spectra) measurements of single crystal CaFe2As2. The experimental valence band spectra are consistent with our DFT calculations. Both theory and experiment show that the Fe 3d-states dominate the Fermi level and hybridize with Ca 3d-states. The sim… ▽ More We present density functional theory (DFT) calculations and a full set of X-ray spectra (resonant inelastic X-ray scattering and X-ray photoelectron spectra) measurements of single crystal CaFe2As2. The experimental valence band spectra are consistent with our DFT calculations. Both theory and experiment show that the Fe 3d-states dominate the Fermi level and hybridize with Ca 3d-states. The simple shape of Xray photoelectron (XPS) Fe 2p-core level spectrum (without any satellite structure typical for correlated systems) suggests itinerant character of the Fe 3d-electrons. Based on the similarity of the calculated and experimental Fe 3d-states distribution in LaOFeAs and CaFe2As2 we conclude that superconductivity in the FeAs-systems can be described within a minimal model, taking into account only Fe 3d-bands close to the Fermi level. △ Less

Submitted 6 February, 2009; originally announced February 2009.

Comments: 19 pages, 9 figures inline with text

Journal ref: Phys. Rev. B 80, 054508 (2009)

Electronic structure study by means of X-ray spectroscopy and theoretical calculations of the "ferric star" single molecule magnet

Authors: A. F. Takacs, M. Neumann, A. V. Postnikov, K. Kuepper, A. Scheurer, S. Sperner, R. W. Saalfrank, K. C. Prince

Abstract: The electronic structure of the single molecule magnet system M[Fe(L)2]3*4CHCl3 (M=Fe,Cr; L=CH3N(CH2CH2O)2) has been studied using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, soft X-ray emission spectroscopy, and density functional calculations. There is good agreement between theoretical calculations and experimental data. The valence band mainly consists of three bands bet… ▽ More The electronic structure of the single molecule magnet system M[Fe(L)2]3*4CHCl3 (M=Fe,Cr; L=CH3N(CH2CH2O)2) has been studied using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, soft X-ray emission spectroscopy, and density functional calculations. There is good agreement between theoretical calculations and experimental data. The valence band mainly consists of three bands between 2 eV and 30 eV. Both theory and experiments show that the top of the valence band is dominated by the hybridization between Fe 3d and O 2p bands. From the shape of the Fe 2p spectra it is argued that Fe in the molecule is most likely in the 2+ charge state. Its neighboring atoms (O,N) exhibit a magnetic polarisation yielding effective spin S=5/2 per iron atom, giving a high spin state molecule with a total S=5 effective spin for the case of M = Fe. △ Less

Submitted 23 November, 2005; v1 submitted 21 November, 2005; originally announced November 2005.

Comments: Fig.2 replaced as it will appear in J. Chem. Phys

Formation of Polymorphic Cluster Phases for Purely Repulsive Soft Spheres

Authors: Bianca M. Mladek, Dieter Gottwald, Gerhard Kahl, Martin Neumann, Christos N. Likos

Abstract: We present results from density functional theory and computer simulations that unambiguously predict the occurrence of first-order freezing transitions for a large class of ultrasoft model systems into cluster crystals. The clusters consist of fully overlap** particles and arise without the existence of attractive forces. The number of particles participating in a cluster scales linearly with… ▽ More We present results from density functional theory and computer simulations that unambiguously predict the occurrence of first-order freezing transitions for a large class of ultrasoft model systems into cluster crystals. The clusters consist of fully overlap** particles and arise without the existence of attractive forces. The number of particles participating in a cluster scales linearly with density, therefore the crystals feature density-independent lattice constants. Clustering is accompanied by polymorphic bcc-fcc transitions, with fcc being the stable phase at high densities. △ Less

Submitted 7 November, 2005; originally announced November 2005.

Comments: 4 pages, 5 figures, submitted to Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 96, 045701 (2006)

Thermodynamically self-consistent liquid state theories for systems with bounded potentials

Authors: Bianca M. Mladek, Gerhard Kahl, Martin Neumann

Abstract: The mean spherical approximation (MSA) can be solved semi-analytically for the Gaussian core model (GCM) and yields - rather surprisingly - exactly the same expressions for the energy and the virial equations. Taking advantage of this semi-analytical framework, we apply the concept of the self-consistent Ornstein-Zernike approximation (SCOZA) to the GCM: a state-dependent function K is introduce… ▽ More The mean spherical approximation (MSA) can be solved semi-analytically for the Gaussian core model (GCM) and yields - rather surprisingly - exactly the same expressions for the energy and the virial equations. Taking advantage of this semi-analytical framework, we apply the concept of the self-consistent Ornstein-Zernike approximation (SCOZA) to the GCM: a state-dependent function K is introduced in the MSA closure relation which is determined to enforce thermodynamic consistency between the compressibility route and either the virial or energy route. Utilizing standard thermodynamic relations this leads to two different differential equations for the function K that have to be solved numerically. Generalizing our concept we propose an integro-differential-equation based formulation of the SCOZA which, although requiring a fully numerical solution, has the advantage that it is no longer restricted to the availability of an analytic solution for a particular system. Rather it can be used for an arbitrary potential and even in combination with other closure relations, such as a modification of the hypernetted chain approximation. △ Less

Submitted 29 September, 2005; originally announced September 2005.

Comments: 11 pages, 11 figures, submitted to J. Chem. Phys

Journal ref: Condens. Matt. Phys. 8, 135 (2005)

Molecular association at the microscopic level

Authors: Richard M. Neumann

Abstract: The Helmholtz free-energy W is calculated as a function of separation distance for two molecules in a fluid, A and B, whose mutual interaction is described by a spherically symmetric potential. For the equilibrium A + B = AB occurring in a dilute solution or gas, W is used to evaluate the association constant K, which for ionic A and B is identical to the Bjerrum result. The criterion defining t… ▽ More The Helmholtz free-energy W is calculated as a function of separation distance for two molecules in a fluid, A and B, whose mutual interaction is described by a spherically symmetric potential. For the equilibrium A + B = AB occurring in a dilute solution or gas, W is used to evaluate the association constant K, which for ionic A and B is identical to the Bjerrum result. The criterion defining the bound species is not arbitrary; i.e., the cutoff separation distance in the configuration integral used to calculate K arises directly from the definition of W. For a one-component dense fluid, W permits the derivation of the phase-condensation temperature, which for a gas is the critical temperature and for a liquid the freezing temperature. For ionic A and B (e.g., Sodium and Chloride ions in molten NaCl), an expression for the freezing temperature is obtained, which is similar to the expression for the melting temperature derived by Kosterlitz and Thouless for two-dimensional systems. △ Less

Submitted 12 March, 2005; originally announced March 2005.

Comments: 11 pages, 1 figure

Electronic Structure of Transition-Metal Dicyanamides Me[N(CN)$_2$]$_2$ (Me = Mn, Fe, Co, Ni, Cu)

Authors: D. O. Demchenko, Amy Y. Liu, E. Z. Kurmaev, L. D. Finkelstein, V. R. Galakhov, A. Moewes, S. G. Chiuzbaian, M. Neumann, Carmen R. Kmety, Kenneth L. Stevenson

Abstract: The electronic structure of Me[N(CN)$_2$]$_2$ (Me=Mn, Fe, Co, Ni, Cu) molecular magnets has been investigated using x-ray emission spectroscopy (XES) and x-ray photoelectron spectroscopy (XPS) as well as theoretical density-functional-based methods. Both theory and experiments show that the top of the valence band is dominated by Me 3d bands, while a strong hybridization between C 2p and N 2p st… ▽ More The electronic structure of Me[N(CN)$_2$]$_2$ (Me=Mn, Fe, Co, Ni, Cu) molecular magnets has been investigated using x-ray emission spectroscopy (XES) and x-ray photoelectron spectroscopy (XPS) as well as theoretical density-functional-based methods. Both theory and experiments show that the top of the valence band is dominated by Me 3d bands, while a strong hybridization between C 2p and N 2p states determines the valence band electronic structure away from the top. The 2p contributions from non-equivalent nitrogen sites have been identified using resonant inelastic x-ray scattering spectroscopy with the excitation energy tuned near the N 1s threshold. The binding energy of the Me 3d bands and the hybridization between N 2p and Me 3d states both increase in going across the row from Me = Mn to Me = Cu. Localization of the Cu 3d states also leads to weak screening of Cu 2p and 3s states, which accounts for shifts in the core 2p and 3s spectra of the transition metal atoms. Calculations indicate that the ground-state magnetic ordering, which varies across the series is largely dependent on the occupation of the metal 3d shell and that structural differences in the superexchange pathways for different compounds play a secondary role. △ Less

Submitted 17 November, 2003; originally announced November 2003.

Comments: 20 pages, 11 figures, 2 tables

Journal ref: Phys. Rev. B 69, 205105 (2004)

Electron Spectroscopy and Density-Functional Study of "Ferric Wheel" Molecules

Authors: A. V. Postnikov, S. G. Chiuzbaian, M. Neumann, S. Bluegel

Abstract: The Li-centered "ferric wheel" molecules with six oxo-bridged iron atoms form molecular crystals. We probed their electronic structure by X-ray photoelectron (XPS) and soft X-ray emission spectroscopy (XES), having calculated in parallel the electronic structure of a single "ferric wheel" molecule from first-principles by tools of the density-functional theory, using, specifically, the Siesta me… ▽ More The Li-centered "ferric wheel" molecules with six oxo-bridged iron atoms form molecular crystals. We probed their electronic structure by X-ray photoelectron (XPS) and soft X-ray emission spectroscopy (XES), having calculated in parallel the electronic structure of a single "ferric wheel" molecule from first-principles by tools of the density-functional theory, using, specifically, the Siesta method. The Fe local moments were found to be 4 mu_B, irrespective of their mutual orientation. Neighbouring atoms, primarily oxygen, exhibit a noticeable magnetic polarization, yielding effective spin S=5/2 per iron atom, that can get inverted as a "rigid" one in magnetic transitions. Corresponding energy preferences can be mapped onto the Heisenberg model with effective exchange parameter J of about -80 K. △ Less

Submitted 17 June, 2003; originally announced June 2003.

Comments: 8 pages with 3 embedded postscript figures; uses elsart.cls; contribution at the E-MRS 2003 Spring Meeting (Strasbourg, June 2003)

Journal ref: J. Phys. Chem. Solids 65(4), p.813-817 (2004)

Electronic structure of magnetic molecules V15: LDA+U calculations, X-ray emission and photoelectron spectra

Authors: D. W. Boukhvalov, E. Z. Kurmaev, A. Moewes, D. A. Zatsepin, V. M. Cherkashenko, S. N. Nemnonov, L. D. Finkelstein, Yu. M. Yarmoshenko, M. Neumann, V. V. Dobrovitski, M. I. Katsnelson, A. I. Lichtenstein, P. Koegerler

Abstract: Electronic structure of V$_{15}$ magnetic molecules (K$_6$ [V$_{15}$ As$_6$ O$_{42}$ (H$_2$O)] \cdot 8H$_2$O)$ has been studied using LSDA+U band structure calculations, and measurements of X-ray photoelectron (valence band, core levels) and X-ray fluorescence spectra (vanadium K$β_5$ and L$_{2,3}$, and oxygen K$α$). Experiments confirm that vanadium ions are tetravalent in V$_{15}… ▽ More Electronic structure of V$_{15}$ magnetic molecules (K$_6$ [V$_{15}$ As$_6$ O$_{42}$ (H$_2$O)] \cdot 8H$_2$O)$ has been studied using LSDA+U band structure calculations, and measurements of X-ray photoelectron (valence band, core levels) and X-ray fluorescence spectra (vanadium K$β_5$ and L$_{2,3}$, and oxygen K$α$). Experiments confirm that vanadium ions are tetravalent in V$_{15}$, and their local atomic structure is close to that of CaV$_3$O$_7$. Comparison of experimental data with the results of electronic structure calculations show that the LSDA+U method provides a description of the electronic structure of V$_{15}$ which agrees well with experiments. △ Less

Submitted 30 September, 2002; originally announced September 2002.

Comments: RevTeX 4, 7 pages, 10 figures

Microscopic structure of liquid hydrogen: a neutron diffraction experiment

Authors: M. Celli, U. Bafile, G. J. Cuello, F. Formisano, E. Guarini, R. Magli, M. Neumann, M. Zoppi

Abstract: We have measured the center-of-mass structure factor S(k) of liquid para-hydrogen by neutron diffraction, using the D4C diffractometer at the Institute Laue Langevin, Grenoble, France. The present determination is at variance with previous results obtained from inelastic neutron scattering data, but agrees with path integral Monte Carlo simulations. We have measured the center-of-mass structure factor S(k) of liquid para-hydrogen by neutron diffraction, using the D4C diffractometer at the Institute Laue Langevin, Grenoble, France. The present determination is at variance with previous results obtained from inelastic neutron scattering data, but agrees with path integral Monte Carlo simulations. △ Less

Submitted 10 September, 2002; originally announced September 2002.

Comments: 4 pages, 2 figures

X-ray spectra of 3d metals of Heusler alloys and La$_{1-x}$Sm$_x$Mn$_2$Si$_2$ compounds

Authors: M. V. Yablonskikh, Yu. M. Yarmoshenko, E. G. Gerasimov, V. S. Gaviko, S. Bartkowski, E. Z. Kurmaev, M. Neumann

Abstract: The Mn x-ray emission spectra and x-ray photoemission spectra of Mn-based Heusler alloys Co$_2$MnAl, Co$_2$MnSb and La$_{1-x}$Sm$_x$Mn$_2$Si$_2$ compounds (x=0, 0.8) have been measured and discussed in connection with a value local magnetic moment at Mn site. The spectra peculiarities reflect also the localization degree of 3d valence electrons of 3d metals in considered compounds. The Mn x-ray emission spectra and x-ray photoemission spectra of Mn-based Heusler alloys Co$_2$MnAl, Co$_2$MnSb and La$_{1-x}$Sm$_x$Mn$_2$Si$_2$ compounds (x=0, 0.8) have been measured and discussed in connection with a value local magnetic moment at Mn site. The spectra peculiarities reflect also the localization degree of 3d valence electrons of 3d metals in considered compounds. △ Less

Submitted 9 April, 2002; v1 submitted 4 March, 2002; originally announced March 2002.

Comments: submitted to J. of Sp. and Rel. Phen

Phase Diagram for Unzip** DNA Using a Bond-Force Criterion

Authors: Richard M. Neumann

Abstract: Using the criterion that the mechanical unzip** transition in a bound homopolymer is triggered when the average force exerted by the single unbound strands on the first base pair in the bound section exceeds the force binding the pair together, the temperature dependence of the critical unzip** force is obtained. In the resulting phase diagram, the critical force decreases monotonically with… ▽ More Using the criterion that the mechanical unzip** transition in a bound homopolymer is triggered when the average force exerted by the single unbound strands on the first base pair in the bound section exceeds the force binding the pair together, the temperature dependence of the critical unzip** force is obtained. In the resulting phase diagram, the critical force decreases monotonically with increasing temperature, from a finite value at zero Kelvin to zero at the critical temperature. △ Less

Submitted 29 January, 2002; originally announced January 2002.

Comments: 4 pages, 2 figures

Electronic structure of MgB$_2$: X-ray emission and absorption studies

Authors: E. Z. Kurmaev, I. I. Lyakhovskaya, J. Kortus, A. Moewes, N. Miyata, M. Demeter, M. Neumann, M. Yanagihara, M. Watanabe, T. Muranaka, J. Akimitsu

Abstract: Measurements of x-ray emission and absorption spectra of the constituents of MgB$_2$ are presented. The results obtained are in good agreement with calculated x-ray spectra, with dipole matrix elements taken into account. The comparison of x-ray emission spectra of graphite, AlB$_2$, and MgB$_2$ in the binding energy scale supports the idea of charge transfer from $σ$ to $π$ bands, which creates… ▽ More Measurements of x-ray emission and absorption spectra of the constituents of MgB$_2$ are presented. The results obtained are in good agreement with calculated x-ray spectra, with dipole matrix elements taken into account. The comparison of x-ray emission spectra of graphite, AlB$_2$, and MgB$_2$ in the binding energy scale supports the idea of charge transfer from $σ$ to $π$ bands, which creates holes at the top of the bonding $σ$ bands and drives the high-T$_c$ △ Less

Submitted 21 March, 2002; v1 submitted 23 March, 2001; originally announced March 2001.

Comments: final version as published in PRB

Journal ref: Phys. Rev. B 65, 134509 (2002)

Entropic Elasticity of Weakly Perturbed Polymers

Authors: Richard M. Neumann

Abstract: Taking into account the nonequivalence of fixed-force and fixed-length ensembles in the weak-force regime, equations of state are derived that describe the equilibrium extension or compression of an ideal Gaussian polymer chain in response to an applied force in such a manner that the calculated unstretched scalar end-to-end separation is the random-coil size rather than zero. The entropy-spring… ▽ More Taking into account the nonequivalence of fixed-force and fixed-length ensembles in the weak-force regime, equations of state are derived that describe the equilibrium extension or compression of an ideal Gaussian polymer chain in response to an applied force in such a manner that the calculated unstretched scalar end-to-end separation is the random-coil size rather than zero. The entropy-spring model for a polymer chain is thereby modified so that for calculational purposes, the spring is of finite rather than zero unstretched length. These force laws are shown to be consistent with observations from stretching experiments performed on single DNA molecules, wherein the measured extension approaches a non-zero limit as the external force is reduced. When used to describe single-chain dynamics, this approach yields a single exponential relaxation expression for a short Gaussian chain (bead-spring dumbbell), which when initially compressed or extended relaxes into a state having the random-coil end separation, in agreement with the Rouse-model result. An equation is derived that describes the elongational response of a charged, tethered chain to a weak electric field (as might occur in electrophoresis), a calculation not feasible with the traditional approach. Finally, an expression for the entropic work required to bring the ends of a chain together, starting from the random-coil configuration, is derived and compared with the Hookean result. △ Less

Submitted 22 January, 2001; originally announced January 2001.

Comments: 9 pages, 2 figures

Electronic structure of Co_xTiSe_2 and Cr_xTiSe_2

Authors: A. N. Titov, A. V. Kuranov, V. G. Pleschev, Yu. M. Yarmoshenko, M. V. Yablonskikh, A. V. Postnikov, S. Plogmann, M. Neumann, A. V. Ezhov, E. Z. Kurmaev

Abstract: The results of investigations of intercalated compounds Cr_xTiSe_2 and Co_xTiSe_2 by X-ray photoelectron spectroscopy (XPS) and X-ray emission spectroscopy (XES) are presented. The data obtained are compared with theoretical results of spin-polarized band structure calculations. A good agreement between theoretical and experimental data for the electronic structure of the investigated materials… ▽ More The results of investigations of intercalated compounds Cr_xTiSe_2 and Co_xTiSe_2 by X-ray photoelectron spectroscopy (XPS) and X-ray emission spectroscopy (XES) are presented. The data obtained are compared with theoretical results of spin-polarized band structure calculations. A good agreement between theoretical and experimental data for the electronic structure of the investigated materials has been observed. The interplay between the M3d--Ti3d hybridization (M=Cr, Co) and the magnetic moment at the M site is discussed. A 0.9 eV large splitting of the core Cr2p{3/2} level was observed, which reveals a strong exchange magnetic interaction of 3d-2p electrons of Cr. In the case of a strong localization of the Cr3d electrons (for x<0.25), the broadening of the CrL spectra into the region of the states above the nominal Fermi level was observed and attributed to X-ray re-emission. The measured kinetic properties are in good accordance with spectral investigations and band calculation results. △ Less

Submitted 9 May, 2000; originally announced May 2000.

Comments: 14 pages, 11 figures, submitted to Phys.Rev.B

Report number: Ti-00-1

Journal ref: Phys. Rev. B 63, 035106 (2001)

Magnetic circular dichroism in X-ray fluorescence of Heusler alloys at threshold excitation

Authors: M. V. Yablonskikh, A. V. Ezhov, V. I. Grebennikov, Yu. M. Yarmoshenko, E. Z. Kurmaev, S. M. Butorin, L. -C. Duda, C. Sothe, T. Kaambre, M. Magnuson, J. Nordgren, S. Plogmann, M. Neumann

Abstract: The results of fluorescence measurements of magnetic circular dichroism (MCD) in Mn L_2,L_3 X-ray emission and absorption for Heusler alloys NiMnSb and Co2MnSb are presented. Very intense resonance Mn L_3 emission is found at the Mn 2p_3/2 threshold and is attributed to a peculiarity of the threshold excitation in materials with the half-metallic character of the electronic structure. A theoreti… ▽ More The results of fluorescence measurements of magnetic circular dichroism (MCD) in Mn L_2,L_3 X-ray emission and absorption for Heusler alloys NiMnSb and Co2MnSb are presented. Very intense resonance Mn L_3 emission is found at the Mn 2p_3/2 threshold and is attributed to a peculiarity of the threshold excitation in materials with the half-metallic character of the electronic structure. A theoretical model for the description of resonance scattering of polarized x-rays is suggested. △ Less

Submitted 25 November, 1999; originally announced November 1999.

Comments: 3 pages, 2 figures. Discussed at conferences, submitting process in progress

Electronic Structure of Cu_(1-x)Ni_xRh_2S_4 and CuRh_2Se_4: Band Structure Calculations, X-ray Photoemission and Fluorescence Measurements

Authors: G. L. W. Hart, W. E. Pickett, E. Z. Kurmaev, D. Hartmann, A. Moewes, M. Neumann, D. L. Ederer, R. Endoh, K. Taniguchi, S. Nagata

Abstract: The electronic structure of spinel-type Cu_(1-x)Ni_xRh_2S_4 (x = 0.0, 0.1, 0.3, 0.5, 1.0) and CuRh_2Se_4 compounds has been studied by means of X-ray photoelectron and fluorescent spectroscopy. Cu L_3, Ni L_3, S L_(2,3) and Se M_(2,3) X-ray emission spectra (XES) were measured near thresholds at Beamline 8.0 of the Lawrence Berkeley Laboratory's Advanced Light Source. XES measurements of the con… ▽ More The electronic structure of spinel-type Cu_(1-x)Ni_xRh_2S_4 (x = 0.0, 0.1, 0.3, 0.5, 1.0) and CuRh_2Se_4 compounds has been studied by means of X-ray photoelectron and fluorescent spectroscopy. Cu L_3, Ni L_3, S L_(2,3) and Se M_(2,3) X-ray emission spectra (XES) were measured near thresholds at Beamline 8.0 of the Lawrence Berkeley Laboratory's Advanced Light Source. XES measurements of the constituent atoms of these compounds, reduced to the same binding energy scale, are found to be in excellent agreement with XPS valence bands. The calculated XES spectra which include dipole matrix elements show that the partial density of states reproduce experimental spectra quite well. States near the Fermi level (E_F) have strong Rh d and S(Se) p character in all compounds. In NiRh_2S_4 the Ni 3d states contribute strongly at E_F, whereas in both Cu compounds the Cu 3d bands are only ~1 eV wide and centered ~2.5 eV below E_F, leaving very little 3d character at E_F. The density of states at the Fermi level is less in NiRh_2S_4 than in CuRh_2S_4. This difference may contribute to the observed decrease, as a function of Ni concentration, in the superconducting transition temperature in Cu_(1-x)Ni_xRh_2S_4. The density of states of the ordered alloy Cu_(1/2)Ni_(1/2)Rh_2S_4 shows behavior that is more ``split-band''-like than ``rigid band''-like. △ Less

Submitted 15 June, 1999; originally announced June 1999.

Comments: 7 pages of text, 11 trailing figures, updated to fix faulty postscript in Fig. 3

Journal ref: Physical Review B (Condensed Matter); 1 Feb. 2000; vol.61, no.6, p.4230-7

X-ray photoelectron 3s spectra of transition metal oxides

Authors: V. R. Galakhov, S. Uhlenbrock, S. Bartkowski, A. V. Postnikov, M. Neumann, L. D. Finkelstein, E. Z. Kurmaev, A. A. Samokhvalov, L. I. Leonyuk

Abstract: We present metal 3s x-ray photoelectron spectra of different transition metal oxides. The values of the 3s exchange splitting for the 3d metal oxides are given as a function of the 3d electron number in the ground state. The spectra were analysed using the simple two-configuration model of the interatomic configuration mixing. The change of the 3s spectra is ascribed to the change of the charge-… ▽ More We present metal 3s x-ray photoelectron spectra of different transition metal oxides. The values of the 3s exchange splitting for the 3d metal oxides are given as a function of the 3d electron number in the ground state. The spectra were analysed using the simple two-configuration model of the interatomic configuration mixing. The change of the 3s spectra is ascribed to the change of the charge-transfer energy. △ Less

Submitted 23 March, 1999; originally announced March 1999.

Comments: 17 pages with 9 embedded postscript figures, uses ioplppt.sty

Report number: B6-99-03