-
An improved approach to manufacture CNT reinforced magnesium AZ91 composites with increased strength and ductility
Authors:
Samaneh Nasiri,
Feng Shi,
Guang Yang,
Erdmann Spiecker,
Qianqian Li
Abstract:
Multiwalled carbon nanotubes (MWCNTs) are decorated with Pt nanoparticles by a "layer-by-layer" approach using poly (sodium 4-styrene sulfonate) (PSS) and poly (diallyl dimethylammonium chloride) (PDDA). Transmission electron microscopy (TEM) images and Energy Dispersive X-Ray (EDX) analysis of the samples confirm Pt deposition on surfaces of CNTs. Dispersibility and dispersion stability of MWCNTs…
▽ More
Multiwalled carbon nanotubes (MWCNTs) are decorated with Pt nanoparticles by a "layer-by-layer" approach using poly (sodium 4-styrene sulfonate) (PSS) and poly (diallyl dimethylammonium chloride) (PDDA). Transmission electron microscopy (TEM) images and Energy Dispersive X-Ray (EDX) analysis of the samples confirm Pt deposition on surfaces of CNTs. Dispersibility and dispersion stability of MWCNTs in the solvents are enhanced when MWCNTs are coated with Pt nanoparticles. Mg AZ91 composites reinforced with MWCNTs are then produced by a melt stirring process. Compression tests of the composites show that adding 0.05\% wt Pt-coated MWCNTs in AZ91 improves the composite's mechanical properties compared to the pure AZ91 and pristine MWCNT/AZ91. Fracture surface analysis of the composite using a scanning electron microscope (SEM) shows individuals pulled out MWCNTs in the case of the Pt-coated MWCNT/AZ91 composites. We attribute this finding to the uniform dispersion of Pt-coated MWCNTs in Mg due to the improved wettability of Pt-coated MWCNTs in Mg melts. Molecular dynamics (MD) simulations of the interaction between Pt-coated MWCNTs and Mg support this interpretation.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Atomistic aspects of load transfer and fracture in CNT-reinforced aluminium
Authors:
Samaneh Nasiri,
Kai Wang,
Mingjun Yang,
Julien Guénolé,
Qianqian Li,
Michael Zaiser
Abstract:
This paper describes atomistic simulations of deformation and fracture of Al reinforced with carbon nanotubes (CNTs). We use density functional theory (DFT) to understand the energetics of Al-graphene interfaces and gain reference data for the parameterization of Al-C empirical potentials. We then investigate the load transfer between CNTs and Al and its effect on composite strengthening. To this…
▽ More
This paper describes atomistic simulations of deformation and fracture of Al reinforced with carbon nanotubes (CNTs). We use density functional theory (DFT) to understand the energetics of Al-graphene interfaces and gain reference data for the parameterization of Al-C empirical potentials. We then investigate the load transfer between CNTs and Al and its effect on composite strengthening. To this end, we perform uniaxial tensile simulations of an Al crystal reinforced with CNTs of various volume fractions. We also study the interaction of the embedded CNTs with a crack. We show that the interaction between CNTs and Al is weak such that, under tensile loading, CNTs can easily slide inside the Al matrix and get pulled out from the cracked surface. This effect is almost independent of CNT length and volume fraction. Little load transfer and consequently no crack bridging are observed during the simulation of pristine CNTs threading the crack surfaces. CNTs that are geometrically fixated inside Al, on the other hand, can increase the fracture stress and enhance plastic dissipation in the matrix. CNTs located in front of a growing crack blunt the crack and induce plastic deformation of the Al matrix. Depending on the CNT orientation, these processes can either increase or decrease the failure stress of the composite.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Pinning of extended dislocations in atomically disordered crystals
Authors:
Aviral Vaid,
De'an Wei,
Erik Bitzek,
Samaneh Nasiri,
Michael Zaiser
Abstract:
In recent years there has been renewed interest in the behavior of dislocations in crystals that exhibit strong atomic scale disorder, as typical of compositionally complex single phase alloys. The behavior of dislocations in such crystals has been often studied in the framework of elastic manifold pinning in disordered systems. Here we discuss modifications of this framework that may need to be a…
▽ More
In recent years there has been renewed interest in the behavior of dislocations in crystals that exhibit strong atomic scale disorder, as typical of compositionally complex single phase alloys. The behavior of dislocations in such crystals has been often studied in the framework of elastic manifold pinning in disordered systems. Here we discuss modifications of this framework that may need to be adapted when dealing with extended dislocations that split into widely separated partials. We demonstrate that the presence of a stacking fault gives rise to an additional stress scale that needs to be compared with the pinning stress of elastic manifold theory to decide whether the partials are pinned individually or the dislocation is pinned as a whole. For the case of weakly interacting partial dislocations, we demonstrate the existence of multiple metastable states at stresses below the depinning threshold and analyze the stress evolution of the stacking fault width during loading. In addition we investigate how geometrical constraints can modulate the dislocation-solute interaction and enhance the pinning stress. We compare our theoretical arguments with results of atomistic and discrete (partial) dislocation dynamics (D(P)DD) simulations.
△ Less
Submitted 24 October, 2021;
originally announced October 2021.
-
Dislocation-CNT Interactions in Aluminium at the Atomic Level
Authors:
Samaneh Nasiri,
Michael Zaiser
Abstract:
The interaction between edge dislocations and carbon nanotubes (CNTs) embedded into an Al matrix is investigated. Both pristine and Ni-coated CNTs are considered. It is demonstrated that the embedded CNTs lead to a flow stress contribution equivalent to that of an array of non-shearable inclusions that are by-passed via the Orowan mechanism. The strain hardening mechanism associated with multiple…
▽ More
The interaction between edge dislocations and carbon nanotubes (CNTs) embedded into an Al matrix is investigated. Both pristine and Ni-coated CNTs are considered. It is demonstrated that the embedded CNTs lead to a flow stress contribution equivalent to that of an array of non-shearable inclusions that are by-passed via the Orowan mechanism. The strain hardening mechanism associated with multiple dislocation passes shows, however, characteristic differences from the Orowan picture that indicate that the embedded CNTs behave analogous to embedded voids.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
Nickel coated carbon nanotubes in aluminum matrix composites: A multiscale simulation study
Authors:
Samaneh Nasiri,
Kai Wang,
Mingjun Yang,
Qianqian Li,
Michael Zasier
Abstract:
In this work we use density functional theory (DFT) calculations to benchmark empirical potentials for the interaction between nickel and sp$^2$ bonded carbon nanoparticles. These potentials are then used in order to investigate how Ni decorated or coated carbon nanotubes (CNT) affect the mechanical properties of Al/CNT composites. In particular we look at the pull-out behaviour of pristine as wel…
▽ More
In this work we use density functional theory (DFT) calculations to benchmark empirical potentials for the interaction between nickel and sp$^2$ bonded carbon nanoparticles. These potentials are then used in order to investigate how Ni decorated or coated carbon nanotubes (CNT) affect the mechanical properties of Al/CNT composites. In particular we look at the pull-out behaviour of pristine as well as Ni-decorated and Ni-coated CNT from an Al matrix. Our result shows that Ni coating may produce an extended interface (interphase) where a significant amount of energy is dissipated during CNT pull-out, leading to a high pull-out force. We also demonstrate that surface decorated CNT may act as efficient nano-crystallization agents and thus provide a novel strengthening mechanism not previously discussed in the literature. We discuss our results in view of promising approaches for engineering CNT-metal interfaces such as to achieve high strength metal-CNT composite.
△ Less
Submitted 11 July, 2019;
originally announced July 2019.