Showing 1–35 of 35 results for author: N'Diaye, A T

Enhanced controllable triplet proximity effect in superconducting spin-orbit coupled spin valves with modified superconductor/ferromagnet interfaces

Authors: Alex T. Bregazzi, Jabir A. Ouassou, Arthur G. Coveney, Nadia A. Stelmashenko, Ali Child, Alpha T. N'Diaye, Jason W. A. Robinson, Fasil K. Dejene, Jacob Linder, Niladri Banerjee

Abstract: In a superconductor/ferromagnet hybrid, a magnetically controlled singlet-to-triplet Cooper pair conversion can modulate the superconducting critical temperature. In these triplet superconducting spin valves, such control usually requires inhomogeneous magnetism. However, in the presence of spin-orbit coupling from an interfacial heavy-metal layer, the singlet/triplet conversion rate and thus the… ▽ More In a superconductor/ferromagnet hybrid, a magnetically controlled singlet-to-triplet Cooper pair conversion can modulate the superconducting critical temperature. In these triplet superconducting spin valves, such control usually requires inhomogeneous magnetism. However, in the presence of spin-orbit coupling from an interfacial heavy-metal layer, the singlet/triplet conversion rate and thus the critical temperature, can be controlled via the magnetization direction of a single homogeneous ferromagnet. Here, we report significantly enhanced controllable pair conversion to a triplet state in a Nb/Pt/Co/Pt superconducting spin valve in which Pt/Co/Pt is homogeneously magnetized and proximity-coupled to a superconducting layer of Nb. The Co/Pt interface furthest away from Nb is modified by a sub-nanometer-thick layer of Cu or Au. We argue that the enhancement is most likely associated from an improvement of the Co/Pt interface due to the insertion of Cu and Au layers. Additionally, the higher normalized orbital moments in Au measured using X-ray magnetic circular dichroism shows that increasing spin-orbit coupling enhances the triplet proximity effect - an observation supported by our theoretical calculations. Our results provide a pathway to enhancing triplet pair creation by interface engineering for device development in superspintronics. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Comments: 11 pages, 4 figures

Journal ref: Applied Physics Letters, 124 (16):162602 (2024)

Limits to the strain engineering of layered square-planar nickelate thin films

Authors: Dan Ferenc Segedin, Berit H. Goodge, Grace A. Pan, Qi Song, Harrison LaBollita, Myung-Chul Jung, Hesham El-Sherif, Spencer Doyle, Ari Turkiewicz, Nicole K. Taylor, Jarad A. Mason, Alpha T. N'Diaye, Hanjong Paik, Ismail El Baggari, Antia S. Botana, Lena F. Kourkoutis, Charles M. Brooks, Julia A. Mundy

Abstract: The layered square-planar nickelates, Nd$_{n+1}$Ni$_{n}$O$_{2n+2}$, are an appealing system to tune the electronic properties of square-planar nickelates via dimensionality; indeed, superconductivity was recently observed in Nd$_{6}$Ni$_{5}$O$_{12}$ thin films. Here, we investigate the role of epitaxial strain in the competing requirements for the synthesis of the $n=3$ Ruddlesden-Popper compound,… ▽ More The layered square-planar nickelates, Nd$_{n+1}$Ni$_{n}$O$_{2n+2}$, are an appealing system to tune the electronic properties of square-planar nickelates via dimensionality; indeed, superconductivity was recently observed in Nd$_{6}$Ni$_{5}$O$_{12}$ thin films. Here, we investigate the role of epitaxial strain in the competing requirements for the synthesis of the $n=3$ Ruddlesden-Popper compound, Nd$_{4}$Ni$_{3}$O$_{10}$, and subsequent reduction to the square-planar phase, Nd$_{4}$Ni$_{3}$O$_{8}$. We synthesize our highest quality Nd$_{4}$Ni$_{3}$O$_{10}$ films under compressive strain on LaAlO$_{3}$ (001), while Nd$_{4}$Ni$_{3}$O$_{10}$ on NdGaO$_{3}$ (110) exhibits tensile strain-induced rock salt faults but retains bulk-like transport properties. A high density of extended defects forms in Nd$_{4}$Ni$_{3}$O$_{10}$ on SrTiO$_{3}$ (001). Films reduced on LaAlO$_{3}$ become insulating and form compressive strain-induced $c$-axis canting defects, while Nd$_{4}$Ni$_{3}$O$_{8}$ films on NdGaO$_{3}$ are metallic. This work provides a pathway to the synthesis of Nd$_{n+1}$Ni$_{n}$O$_{2n+2}$ thin films and sets limits on the ability to strain engineer these compounds via epitaxy. △ Less

Submitted 27 February, 2023; originally announced February 2023.

Journal ref: Nat Commun 14, 1468 (2023)

Antiferromagnetic metal phase in an electron-doped rare-earth nickelate

Authors: Qi Song, Spencer Doyle, Grace A. Pan, Ismail El Baggari, Dan Ferenc Segedin, Denisse Cordova Carrizales, Johanna Nordlander, Christian Tzschaschel, James R. Ehrets, Zubia Hasan, Hesham El-Sherif, Jyoti Krishna, Chase Hanson, Harrison LaBollita, Aaron Bostwick, Chris Jozwiak, Eli Rotenberg, Su-Yang Xu, Alessandra Lanzara, Alpha T. N'Diaye, Colin A. Heikes, Yaohua Liu, Hanjong Paik, Charles M. Brooks, Betul Pamuk , et al. (6 additional authors not shown)

Abstract: Long viewed as passive elements, antiferromagnetic materials have emerged as promising candidates for spintronic devices due to their insensitivity to external fields and potential for high-speed switching. Recent work exploiting spin and orbital effects has identified ways to electrically control and probe the spins in metallic antiferromagnets, especially in noncollinear or noncentrosymmetric sp… ▽ More Long viewed as passive elements, antiferromagnetic materials have emerged as promising candidates for spintronic devices due to their insensitivity to external fields and potential for high-speed switching. Recent work exploiting spin and orbital effects has identified ways to electrically control and probe the spins in metallic antiferromagnets, especially in noncollinear or noncentrosymmetric spin structures. The rare earth nickelate NdNiO3 is known to be a noncollinear antiferromagnet where the onset of antiferromagnetic ordering is concomitant with a transition to an insulating state. Here, we find that for low electron do**, the magnetic order on the nickel site is preserved while electronically a new metallic phase is induced. We show that this metallic phase has a Fermi surface that is mostly gapped by an electronic reconstruction driven by the bond disproportionation. Furthermore, we demonstrate the ability to write to and read from the spin structure via a large zero-field planar Hall effect. Our results expand the already rich phase diagram of the rare-earth nickelates and may enable spintronics applications in this family of correlated oxides. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 25 pages, 4 figures

Synthesis and electronic properties of Nd$_{n+1}$Ni$_{n}$O$_{3n+1}$ Ruddlesden-Popper nickelate thin films

Authors: Grace A. Pan, Qi Song, Dan Ferenc Segedin, Myung-Chul Jung, Hesham El-Sherif, Erin E. Fleck, Berit H. Goodge, Spencer Doyle, Denisse Córdova Carrizales, Alpha T. N'Diaye, Padraic Shafer, Hanjong Paik, Lena F. Kourkoutis, Ismail El Baggari, Antia S. Botana, Charles M. Brooks, Julia A. Mundy

Abstract: The rare-earth nickelates possess a diverse set of collective phenomena including metal-to-insulator transitions, magnetic phase transitions, and, upon chemical reduction, superconductivity. Here, we demonstrate epitaxial stabilization of layered nickelates in the Ruddlesden-Popper form, Nd$_{n+1}$Ni$_n$O$_{3n+1}$, using molecular beam epitaxy. By optimizing the stoichiometry of the parent perovsk… ▽ More The rare-earth nickelates possess a diverse set of collective phenomena including metal-to-insulator transitions, magnetic phase transitions, and, upon chemical reduction, superconductivity. Here, we demonstrate epitaxial stabilization of layered nickelates in the Ruddlesden-Popper form, Nd$_{n+1}$Ni$_n$O$_{3n+1}$, using molecular beam epitaxy. By optimizing the stoichiometry of the parent perovskite NdNiO$_3$, we can reproducibly synthesize the $n = 1 - 5$ member compounds. X-ray absorption spectroscopy at the O $K$ and Ni $L$ edges indicate systematic changes in both the nickel-oxygen hybridization level and nominal nickel filling from 3$d^8$ to 3$d^7$ as we move across the series from $n = 1$ to $n = \infty$. The $n = 3 - 5$ compounds exhibit weakly hysteretic metal-to-insulator transitions with transition temperatures that depress with increasing order toward NdNiO$_3$ ($n = \infty)$. △ Less

Submitted 18 May, 2022; originally announced May 2022.

Comments: 11 pages, 4 figures with Supplemental Information

Journal ref: Phys. Rev. Materials 6, 055003 (2022)

Elucidating the local atomic and electronic structure of amorphous oxidized superconducting niobium films

Authors: Thomas F. Harrelson, Evan Sheridan, Ellis Kennedy, John Vinson, Alpha T. N'Diaye, M. Virginia P. Altoé, Adam Schwartzberg, Irfan Siddiqi, D. Frank Ogletree, Mary C. Scott, Sinéad M. Griffin

Abstract: Qubits made from superconducting materials are a mature platform for quantum information science application such as quantum computing. However, materials-based losses are now a limiting factor in reaching the coherence times needed for applications. In particular, knowledge of the atomistic structure and properties of the circuit materials is needed to identify, understand, and mitigate materials… ▽ More Qubits made from superconducting materials are a mature platform for quantum information science application such as quantum computing. However, materials-based losses are now a limiting factor in reaching the coherence times needed for applications. In particular, knowledge of the atomistic structure and properties of the circuit materials is needed to identify, understand, and mitigate materials-based decoherence channels. In this work we characterize the atomic structure of the native oxide film formed on Nb resonators by comparing fluctuation electron microscopy experiments to density functional theory calculations, finding that an amorphous layer consistent with an Nb$_2$O$_5$ stoichiometry. Comparing X-ray absorption measurements at the Oxygen K edge with first-principles calculations, we find evidence of d-type magnetic impurities in our sample, known to cause impedance in proximal superconductors. This work identifies the structural and chemical composition of the oxide layer grown on Nb superconductors, and shows that soft X-ray absorption can fingerprint magnetic impurities in these superconducting systems. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Comments: 7 pages, 4 figures. The following article has been submitted to Applied Physics Letters

Chiral Spin Bobbers in Exchange-Coupled Hard-Soft Magnetic Bilayers

Authors: Xiaohang Zhang, Tieren Gao, Lei Fang, Sean Fackler, Julie A. Borchers, Brian J. Kirby, Brian B. Maranville, Samuel E. Lofland, Alpha T. N'Diaye, Elke Arenholz, Ahsan Ullah, Jun Cui, Ralph Skomski, Ichiro Takeuchi

Abstract: The spin structure of exchange-coupled MnBi:Co-Fe bilayers is investigated by X-ray magnetic circular dichroism (XMCD), polarized neutron reflectometry (PNR), and micromagnetic simu-lations. The purpose of the present research is two-fold. First, the current search for new permanent-magnet materials includes hard-soft nanocomposites, and the analysis of coercivity mechanisms in these structures is… ▽ More The spin structure of exchange-coupled MnBi:Co-Fe bilayers is investigated by X-ray magnetic circular dichroism (XMCD), polarized neutron reflectometry (PNR), and micromagnetic simu-lations. The purpose of the present research is two-fold. First, the current search for new permanent-magnet materials includes hard-soft nanocomposites, and the analysis of coercivity mechanisms in these structures is an important aspect of this quest. Second, topological micro-magnetic structures such as skyrmions have recently become of intense fundamental and applied research, for example in the context of spin-based electronics. We find that the magnetization reversal of the MnBi:Co-Fe bilayer structure involves a curling-type twisting of the magnetization in the film plane. This curling in the exchange-coupled hard-soft magnetic bilayers is reminiscent of chiral spin structures known as bobbers and, in fact, establishes a new type of skyrmionic spin structure. △ Less

Submitted 26 April, 2022; v1 submitted 17 November, 2021; originally announced November 2021.

Journal ref: Journal of Magnetism and Magnetic Materials 560, 169627 (2022)

Superconductivity in a quintuple-layer square-planar nickelate

Authors: Grace A. Pan, Dan Ferenc Segedin, Harrison LaBollita, Qi Song, Emilian M. Nica, Berit H. Goodge, Andrew T. Pierce, Spencer Doyle, Steve Novakov, Denisse Córdova Carrizales, Alpha T. N'Diaye, Padraic Shafer, Hanjong Paik, John T. Heron, Jarad A. Mason, Amir Yacoby, Lena F. Kourkoutis, Onur Erten, Charles M. Brooks, Antia S. Botana, Julia A. Mundy

Abstract: Since the discovery of high-temperature superconductivity in the copper oxide materials, there have been sustained efforts to both understand the origins of this phase and discover new cuprate-like superconducting materials. One prime materials platform has been the rare-earth nickelates and indeed superconductivity was recently discovered in the doped compound Nd$_{0.8}$Sr$_{0.2}$NiO$_2$. Undoped… ▽ More Since the discovery of high-temperature superconductivity in the copper oxide materials, there have been sustained efforts to both understand the origins of this phase and discover new cuprate-like superconducting materials. One prime materials platform has been the rare-earth nickelates and indeed superconductivity was recently discovered in the doped compound Nd$_{0.8}$Sr$_{0.2}$NiO$_2$. Undoped NdNiO$_2$ belongs to a series of layered square-planar nickelates with chemical formula Nd$_{n+1}$Ni$_n$O$_{2n+2}$ and is known as the 'infinite-layer' ($n = \infty$) nickelate. Here, we report the synthesis of the quintuple-layer ($n = 5$) member of this series, Nd$_6$Ni$_5$O$_{12}$, in which optimal cuprate-like electron filling ($d^{8.8}$) is achieved without chemical do**. We observe a superconducting transition beginning at $\sim$13 K. Electronic structure calculations, in tandem with magnetoresistive and spectroscopic measurements, suggest that Nd$_6$Ni$_5$O$_{12}$ interpolates between cuprate-like and infinite-layer nickelate-like behavior. In engineering a distinct superconducting nickelate, we identify the square-planar nickelates as a new family of superconductors which can be tuned via both do** and dimensionality. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Comments: 21 pages, 4 figures

Journal ref: Nature Materials (2021)

Robust ferromagnetism in highly strained SrCoO3 thin films

Authors: Yujia Wang, Qing He, Wenmei Ming, Mao-Hua Du, Nianpeng Lu, Clodomiro Cafolla, Jun Fujioka, Qinghua Zhang, Ding Zhang, Shengchun Shen, Yingjie Lyu, Alpha T. N'Diaye, Elke Arenholz, Lin Gu, Cewen Nan, Yoshinori Tokura, Satoshi Okamoto, Pu Yu

Abstract: Epitaxial strain provides important pathways to control the magnetic and electronic states in transition metal oxides. However, the large strain is usually accompanied by a strong reduction of the oxygen vacancy formation energy, which hinders the direct manipulation of their intrinsic properties. Here using a post-deposition ozone annealing method, we obtained a series of oxygen stoichiometric Sr… ▽ More Epitaxial strain provides important pathways to control the magnetic and electronic states in transition metal oxides. However, the large strain is usually accompanied by a strong reduction of the oxygen vacancy formation energy, which hinders the direct manipulation of their intrinsic properties. Here using a post-deposition ozone annealing method, we obtained a series of oxygen stoichiometric SrCoO3 thin films with the tensile strain up to 3.0%. We observed a robust ferromagnetic ground state in all strained thin films, while interestingly the tensile strain triggers a distinct metal to insulator transition along with the increase of the tensile strain. The persistent ferromagnetic state across the electrical transition therefore suggests that the magnetic state is directly correlated with the localized electrons, rather than the itinerant ones, which then calls for further investigation of the intrinsic mechanism of this magnetic compound beyond the double-exchange mechanism. △ Less

Submitted 4 April, 2020; v1 submitted 29 March, 2020; originally announced March 2020.

Emergent electric field control of phase transformation in oxide superlattices

Authors: Di Yi, Yujia Wang, Olaf M. J. van 't Erve, Liubin Xu, Hongtao Yuan, Michael J. Veit, Purnima P. Balakrishnan, Yongseong Choi, Alpha T. N'Diaye, Padraic Shafer, Elke Arenholz, Alexander Grutter, Haixuan Xu, Pu Yu, Berend T. Jonker, Yuri Suzuki

Abstract: Electric fields can transform materials with respect to their structure and properties, enabling various applications ranging from batteries to spintronics. Recently electrolytic gating, which can generate large electric fields and voltage-driven ion transfer, has been identified as a powerful means to achieve electric-field-controlled phase transformations. The class of transition metal oxides (T… ▽ More Electric fields can transform materials with respect to their structure and properties, enabling various applications ranging from batteries to spintronics. Recently electrolytic gating, which can generate large electric fields and voltage-driven ion transfer, has been identified as a powerful means to achieve electric-field-controlled phase transformations. The class of transition metal oxides (TMOs) provide many potential candidates that present a strong response under electrolytic gating. However, very few show a reversible structural transformation at room-temperature. Here, we report the realization of a digitally synthesized TMO that shows a reversible, electric-field-controlled transformation between distinct crystalline phases at room-temperature. In superlattices comprised of alternating one-unit-cell of SrIrO3 and La0.2Sr0.8MnO3, we find a reversible phase transformation with a 7% lattice change and dramatic modulation in chemical, electronic, magnetic and optical properties, mediated by the reversible transfer of oxygen and hydrogen ions. Strikingly, this phase transformation is absent in the constituent oxides, solid solutions and larger period superlattices. Our findings open up a new class of materials for voltage-controlled functionality. △ Less

Submitted 25 February, 2020; originally announced February 2020.

Journal ref: Nat Commun 11, 902 (2020)

Tailoring magnetic order via atomically stacking 3d/5d electrons

Authors: Ke Huang, Liang Wu, Maoyu Wang, Nyayabanta Swain, M. Motapothula, Yongzheng Luo, Kun Han, Mingfeng Chen, Chen Ye, Allen Jian Yang, Huan Xu, Dong-chen Qi, Alpha T. N'Diaye, Christos Panagopoulos, Daniel Primetzhofer, Lei Shen, Pinaki Sengupta, **g Ma, Zhenxing Feng, Ce-Wen Nan, X. Renshaw Wang

Abstract: The ability to tune magnetic orders, such as magnetic anisotropy and topological spin texture, is desired in order to achieve high-performance spintronic devices. A recent strategy has been to employ interfacial engineering techniques, such as the introduction of spin-correlated interfacial coupling, to tailor magnetic orders and achieve novel magnetic properties. We chose a unique polar-nonpolar… ▽ More The ability to tune magnetic orders, such as magnetic anisotropy and topological spin texture, is desired in order to achieve high-performance spintronic devices. A recent strategy has been to employ interfacial engineering techniques, such as the introduction of spin-correlated interfacial coupling, to tailor magnetic orders and achieve novel magnetic properties. We chose a unique polar-nonpolar LaMnO3/SrIrO3 superlattice because Mn (3d)/Ir (5d) oxides exhibit rich magnetic behaviors and strong spin-orbit coupling through the entanglement of their 3d and 5d electrons. Through magnetization and magnetotransport measurements, we found that the magnetic order is interface-dominated as the superlattice period is decreased. We were able to then effectively modify the magnetization, tilt of the ferromagnetic easy axis, and symmetry transition of the anisotropic magnetoresistance of the LaMnO3/SrIrO3 superlattice by introducing additional Mn (3d) and Ir (5d) interfaces. Further investigations using in-depth first-principles calculations and numerical simulations revealed that these magnetic behaviors could be understood by the 3d/5d electron correlation and Rashba spin-orbit coupling. The results reported here demonstrate a new route to synchronously engineer magnetic properties through the atomic stacking of different electrons, contributing to future applications. △ Less

Submitted 14 September, 2021; v1 submitted 16 January, 2020; originally announced January 2020.

Journal ref: Applied Physics Reviews 7, 011401 (2020)

Probe Ferroelectricity by X-ray Absorption Spectroscopy in Molecular Crystal

Authors: Fujie Tang, Xuanyuan Jiang, Hsin-Yu Ko, Jianhang Xu, Mehmet Topsakal, Guanhua Hao, Alpha T. N'Diaye, Peter A. Dowben, Deyu Lu, Xiaoshan Xu, Xifan Wu

Abstract: We carry out X-ray absorption spectroscopy experiment at oxygen K-edge in croconic acid (C5H2O5) crystal as a prototype of ferroelectric organic molecular solid, whose electric polarization is generated by proton transfer. The experimental spectrum is well reproduced by the electron-hole excitation theory simulations from configuration generated by ab initio molecular dynamics simulation. When inv… ▽ More We carry out X-ray absorption spectroscopy experiment at oxygen K-edge in croconic acid (C5H2O5) crystal as a prototype of ferroelectric organic molecular solid, whose electric polarization is generated by proton transfer. The experimental spectrum is well reproduced by the electron-hole excitation theory simulations from configuration generated by ab initio molecular dynamics simulation. When inversion symmetry is broken in ferroelectric state, the hydrogen bonding environment on the two bonded molecules become inequivalent. Such a difference is sensitively probed by the bound excitation in the pre-edge, which are strongly localized on the excited molecules. Our analysis shows that a satellite peak in the pre-edge will emerge at higher excitation energy which serves as a clear signature of ferroelectricity in the material. △ Less

Submitted 19 December, 2019; originally announced December 2019.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Materials 4, 034401 (2020)

Dam** enhancement in coherent ferrite/insulating-paramagnet bilayers

Authors: Jacob J. Wisser, Alexander J. Grutter, Dustin A. Gilbert, Alpha T. N'Diaye, Christoph Klewe, Padraic Shafer, Elke Arenholz, Yuri Suzuki, Satoru Emori

Abstract: High-quality epitaxial ferrites, such as low-dam** MgAl-ferrite (MAFO), are promising nanoscale building blocks for all-oxide heterostructures driven by pure spin current. However, the impact of oxide interfaces on spin dynamics in such heterostructures remains an open question. Here, we investigate the spin dynamics and chemical and magnetic depth profiles of 15-nm-thick MAFO coherently interfa… ▽ More High-quality epitaxial ferrites, such as low-dam** MgAl-ferrite (MAFO), are promising nanoscale building blocks for all-oxide heterostructures driven by pure spin current. However, the impact of oxide interfaces on spin dynamics in such heterostructures remains an open question. Here, we investigate the spin dynamics and chemical and magnetic depth profiles of 15-nm-thick MAFO coherently interfaced with an isostructural $\approx$1-8-nm-thick overlayer of paramagnetic CoCr$_2$O$_4$ (CCO) as an all-oxide model system. Compared to MAFO without an overlayer, effective Gilbert dam** in MAFO/CCO is enhanced by a factor of $>$3, irrespective of the CCO overlayer thickness. We attribute this dam** enhancement to spin scattering at the $\sim$1-nm-thick chemically disordered layer at the MAFO/CCO interface, rather than spin pum** or proximity-induced magnetism. Our results indicate that dam** in ferrite-based heterostructures is strongly influenced by interfacial chemical disorder, even if the thickness of the disordered layer is a small fraction of the ferrite thickness. △ Less

Submitted 25 October, 2019; v1 submitted 22 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Applied 12, 054044 (2019)

Unconventional crystal field splitting in non-centrosymmetric BaTiO$_3$ thin films

Authors: Yang Song, Xiaoran Liu, Fangdi Wen, M. Kareev, Ruyi Zhang, Yujuan Pei, Jiachang Bi, Padraic Shafer, Alpha T. N'Diaye, Elke Arenholz, Se Young Park, Yanwei Cao, Jak. Chakhalian

Abstract: Understanding the crystal field splitting and orbital polarization in non-centrosymmetric systems such as ferroelectric materials is fundamentally important. In this study, taking BaTiO$_3$ (BTO) as a representative material we investigate titanium crystal field splitting and orbital polarization in non-centrosymmetric TiO$_6$ octahedra with resonant X-ray linear dichroism at Ti $L_{2,3}$-edge. Th… ▽ More Understanding the crystal field splitting and orbital polarization in non-centrosymmetric systems such as ferroelectric materials is fundamentally important. In this study, taking BaTiO$_3$ (BTO) as a representative material we investigate titanium crystal field splitting and orbital polarization in non-centrosymmetric TiO$_6$ octahedra with resonant X-ray linear dichroism at Ti $L_{2,3}$-edge. The high-quality BaTiO$_3$ thin films were deposited on DyScO$_3$ (110) single crystal substrates in a layer-by-layer way by pulsed laser deposition. The reflection high-energy electron diffraction (RHEED) and element specific X-ray absorption spectroscopy (XAS) were performed to characterize the structural and electronic properties of the films. In sharp contrast to conventional crystal field splitting and orbital configuration ($d_{xz}$/$d_{yz}$ $<$ $d_{xy}$ $<$ $d_{3z^2-r^2}$ $<$ $d_{x^2-y^2}$ or $d_{xy}$ $<$ $d_{xz}$/$d_{yz}$ $<$ $d_{x^2-y^2}$ $<$ $d_{3z^2-r^2}$) according to Jahn-Teller effect, it is revealed that $d_{xz}$, $d_{yz}$, and $d_{xy}$ orbitals are nearly degenerate, whereas $d_{3z^2-r^2}$ and $d_{x^2-y^2}$ orbitals are split with an energy gap $\sim$ 100 meV in the epitaxial BTO films. The unexpected degenerate states $d_{xz}$/$d_{yz}$/$d_{xy}$ are coupled to Ti-O displacements resulting from competition between polar and Jahn-Teller distortions in non-centrosymmetric TiO$_6$ octhedra of BTO films. Our results provide a route to manipulate orbital degree of freedom by switching electric polarization in ferroelectric materials. △ Less

Submitted 20 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Materials 4, 024413 (2020)

Coherent ac spin current transmission across an antiferromagnetic CoO insulator

Authors: Q. Li, M. Yang, C. Klewe, P. Shafer, A. T. N'Diaye, D. Hou, T. Y. Wang, N. Gao, E. Saitoh, C. Hwang, R. J. Hicken, J. Li, E. Arenholz, Z. Q. Qiu

Abstract: The recent discovery of spin-current transmission through antiferromagnetic (AFM) insulating materials opens up unprecedented opportunities for fundamental physics and spintronics applications. The great mystery currently surrounding this topic is: how could THz AFM magnons mediate a GHz spin current? This mis-match of frequencies becomes particularly critical for the case of coherent ac spin-curr… ▽ More The recent discovery of spin-current transmission through antiferromagnetic (AFM) insulating materials opens up unprecedented opportunities for fundamental physics and spintronics applications. The great mystery currently surrounding this topic is: how could THz AFM magnons mediate a GHz spin current? This mis-match of frequencies becomes particularly critical for the case of coherent ac spin-current, raising the fundamental question of whether a GHz ac spin-current can ever keep its coherence inside an AFM insulator and so drive the spin precession of another FM layer coherently? Utilizing element- and time-resolved x-ray pump-probe measurements on Py/Ag/CoO/Ag/Fe75Co25/MgO(001) heterostructures, we demonstrate that a coherent GHz ac spin current pumped by the permalloy (Py) ferromagnetic resonance (FMR) can transmit coherently across an antiferromagnetic CoO insulating layer to drive a coherent spin precession of the FM Fe75Co25 layer. Further measurement results favor thermal magnons rather than evanescent spin waves as the mediator of the coherent ac spin current in CoO. △ Less

Submitted 1 June, 2019; originally announced June 2019.

Report number: 5265(2019)

Journal ref: Nature Communications 2019

Interface-engineered hole do** in Sr2IrO4/LaNiO3 heterostructure

Authors: Fangdi Wen, Xiaoran Liu, Qinghua Zhang, M. Kareev, B. Pal, Yanwei Cao, J. W. Freeland, A. T. N'Diaye, P. Shafer, E. Arenholz, Lin Gu, J. Chakhalian

Abstract: The relativistic Mott insulator Sr2IrO4 driven by large spin-orbit interaction is known for the Jeff = 1/2 antiferromagnetic state which closely resembles the electronic structure of parent compounds of superconducting cuprates. Here, we report the realization of hole-doped Sr2IrO4 by means of interfacial charge transfer in Sr2IrO4/LaNiO3 heterostructures. X-ray photoelectron spectroscopy on Ir 4f… ▽ More The relativistic Mott insulator Sr2IrO4 driven by large spin-orbit interaction is known for the Jeff = 1/2 antiferromagnetic state which closely resembles the electronic structure of parent compounds of superconducting cuprates. Here, we report the realization of hole-doped Sr2IrO4 by means of interfacial charge transfer in Sr2IrO4/LaNiO3 heterostructures. X-ray photoelectron spectroscopy on Ir 4f edge along with the X-ray absorption spectroscopy at Ni L2 edge confirmed that 5d electrons from Ir sites are transferred onto Ni sites, leading to markedly electronic reconstruction at the interface. Although the Sr2IrO4/LaNiO3 heterostructure remains non-metallic, we reveal that the transport behavior is no longer described by the Mott variable range hop** mode, but by the Efros-Shklovskii model. These findings highlight a powerful utility of interfaces to realize emerging electronic states of the Ruddlesden-Popper phases of Ir-based oxides. △ Less

Submitted 4 May, 2019; originally announced May 2019.

Comments: 9 pages including 3 figures and references

Ionic Tuning of Cobaltites at the Nanoscale

Authors: Dustin A. Gilbert, Alexander J. Grutter, Peyton D. Murray, Rajesh V. Chopdekar, Alexander M. Kane, Aleksey L. Ionin, Michael S. Lee, Steven R. Spurgeon, Brian J. Kirby, Brian B. Maranville, Alpha T. N'Diaye, Apurva Mehta, Elke Arenholz, Kai Liu, Yayoi Takamura, Julie A. Borchers

Abstract: Control of materials through custom design of ionic distributions represents a powerful new approach to develop future technologies ranging from spintronic logic and memory devices to energy storage. Perovskites have shown particular promise for ionic devices due to their high ion mobility and sensitivity to chemical stoichiometry. In this work, we demonstrate a solid-state approach to control of… ▽ More Control of materials through custom design of ionic distributions represents a powerful new approach to develop future technologies ranging from spintronic logic and memory devices to energy storage. Perovskites have shown particular promise for ionic devices due to their high ion mobility and sensitivity to chemical stoichiometry. In this work, we demonstrate a solid-state approach to control of ionic distributions in (La,Sr)CoO$_{3}$ thin films. Depositing a Gd cap** layer on the perovskite film, oxygen is controllably extracted from the structure, up-to 0.5 O/u.c. throughout the entire 36 nm thickness. Commensurate with the oxygen extraction, the Co valence state and saturation magnetization show a smooth continuous variation. In contrast, magnetoresistance measurements show no-change in the magnetic anisotropy and a rapid increase in the resistivity over the same range of oxygen stoichiometry. These results suggest significant phase separation, with metallic ferromagnetic regions and oxygen-deficient, insulating, non-ferromagnetic regions, forming percolated networks. Indeed, X-ray diffraction identifies oxygen-vacancy ordering, including transformation to a brownmillerite crystal structure. The unexpected transformation to the brownmillerite phase at ambient temperature is further confirmed by high-resolution scanning transmission electron microscopy which shows significant structural - and correspondingly chemical - phase separation. This work demonstrates room-temperature ionic control of magnetism, electrical resistivity, and crystalline structure in a 36 nm thick film, presenting new opportunities for ionic devices that leverage multiple material functionalities. △ Less

Submitted 23 September, 2018; originally announced September 2018.

Journal ref: Phys. Rev. Materials 2, 104402 (2018)

Towards diluted magnetism in TaAs

Authors: Yu Liu, Zhilin Li, Liwei Guo, Xiaolong Chen, Ye Yuan, Chi Xu, René Hübner, Shavkat Akhmadaliev, Arkady V. Krasheninnikov, Alpha T. N'Diaye, Elke Arenholz, Manfred Helm, Shengqiang Zhou

Abstract: Magnetism in Weyl semimetals is desired to investigate the interaction between the magnetic moments and Weyl fermions, e.g. to explore anomalous quantum Hall phenomena. Here we demonstrate that proton irradiation is an effective tool to induce ferromagnetism in the Weyl semimetal TaAs. The intrinsic magnetism is observed with a transition temperature above room temperature. The magnetic moments fr… ▽ More Magnetism in Weyl semimetals is desired to investigate the interaction between the magnetic moments and Weyl fermions, e.g. to explore anomalous quantum Hall phenomena. Here we demonstrate that proton irradiation is an effective tool to induce ferromagnetism in the Weyl semimetal TaAs. The intrinsic magnetism is observed with a transition temperature above room temperature. The magnetic moments from d states are found to be localized around Ta atoms. Further, the first-principles calculations indicate that the d states localized on the nearest-neighbor Ta atoms of As vacancy sites are responsible for the observed magnetic moments and the long-ranged magnetic order. The results show the feasibility of inducing ferromagnetism in Weyl semimetals so that they may facilitate the applications of this material in spintronics. △ Less

Submitted 28 September, 2017; v1 submitted 13 September, 2017; originally announced September 2017.

Comments: 20 pages, 6 figures

Journal ref: Phys. Rev. Materials 1, 044203 (2017)

Interaction between magnetic moments and itinerant carriers in d0 ferromagnetic SiC

Authors: Yu Liu, Ye Yuan, Fang Liu, Roman Boettger, Wolfgang Anwand, Yutian Wang, Anna Semisalova, Alexey N. Ponomaryov, Xia Lu, Alpha T. N'Diaye, Elke Arenholz, Viton Heera, Wolfgang Skorupa, Manfred Helm, Shengqiang Zhou

Abstract: Elucidating the interaction between magnetic moments and itinerant carriers is an important step to spintronic applications. Here, we investigate magnetic and transport properties in d0 ferromagnetic SiC single crystals prepared by postimplantation pulsed laser annealing. Magnetic moments are contributed by the p states of carbon atoms, but their magnetic circular dichroism is different from that… ▽ More Elucidating the interaction between magnetic moments and itinerant carriers is an important step to spintronic applications. Here, we investigate magnetic and transport properties in d0 ferromagnetic SiC single crystals prepared by postimplantation pulsed laser annealing. Magnetic moments are contributed by the p states of carbon atoms, but their magnetic circular dichroism is different from that in semi-insulating SiC samples. The anomalous Hall effect and negative magnetoresistance indicate the influence of d0 spin order on free carriers. The ferromagnetism is relatively weak in N-implanted SiC compared with that in Al-implanted SiC after annealing. The results suggest that d0 magnetic moments and itinerant carriers can interact with each other, which will facilitate the development of SiC spintronic devices with d0 ferromagnetism. △ Less

Submitted 22 May, 2017; originally announced May 2017.

Comments: 20 pages, 5 figures

Journal ref: Phys. Rev. B 95, 195309 (2017)

Significant Dzyaloshinskii-Moriya Interaction at Graphene-Ferromagnet Interfaces due to Rashba-effect

Authors: Hongxin Yang, Gong Chen, Alexandre A. C. Cotta, Alpha T. N'Diaye, Sergey A. Nikolaev, Edmar A. Soares, Waldemar A. A. Macedo, Andreas K. Schmid, Albert Fert, Mairbek Chshiev

Abstract: The possibility of utilizing the rich spin-dependent properties of graphene has attracted great attention in pursuit of spintronics advances. The promise of high-speed and low-energy consumption devices motivates a search for layered structures that stabilize chiral spin textures such as topologically protected skyrmions. Here we demonstrate that chiral spin textures are induced at graphene/ferrom… ▽ More The possibility of utilizing the rich spin-dependent properties of graphene has attracted great attention in pursuit of spintronics advances. The promise of high-speed and low-energy consumption devices motivates a search for layered structures that stabilize chiral spin textures such as topologically protected skyrmions. Here we demonstrate that chiral spin textures are induced at graphene/ferromagnetic metal interfaces. This is unexpected because graphene is a weak spin-orbit coupling material and is generally not expected to induce sufficient Dzyaloshinskii-Moriya interaction to affect magnetic chirality. We demonstrate that graphene induces a new type of Dzyaloshinskii-Moriya interaction due to a Rashba effect. First-principles calculations and experiments using spin-polarized electron microscopy show that this graphene-induced Dzyaloshinskii-Moriya interaction can have similar magnitude as at interfaces with heavy metals. This work paves a new path towards two-dimensional material based spin orbitronics. △ Less

Submitted 28 April, 2017; originally announced April 2017.

Comments: 21 pages, 4 figures

Journal ref: Nature Materials 17, 605 (2018)

Role of polar compensation in interfacial ferromagnetism of LaNiO$_3$/CaMnO$_3$ superlattices

Authors: Charles L. Flint, Hoyoung Jang, Jun-Sik Lee, Alpha T. N'Diaye, Padraic Shafer, Elke Arenholz, Yuri Suzuki

Abstract: Polar compensation can play an important role in the determination of interfacial electronic and magnetic properties in oxide heterostructures. Using x-ray absorption spectroscopy, x-ray magnetic circular dichroism, bulk magnetometry, and transport measurements, we find that interfacial charge redistribution via polar compensation is essential for explaining the evolution of interfacial ferromagne… ▽ More Polar compensation can play an important role in the determination of interfacial electronic and magnetic properties in oxide heterostructures. Using x-ray absorption spectroscopy, x-ray magnetic circular dichroism, bulk magnetometry, and transport measurements, we find that interfacial charge redistribution via polar compensation is essential for explaining the evolution of interfacial ferromagnetism in LaNiO$_3$/CaMnO$_3$ superlattices as a function of LaNiO$_3$ layer thickness. In insulating superlattices (4 unit cells or less of LaNiO$_3$), magnetism is dominated by Ni-Mn superexchange, while itinerant electron-based Mn-Mn double-exchange plays a role in thicker metallic superlattices. X-ray magnetic circular dichroism and resonant x-ray scattering show that Ni-Mn superexchange contributes to the magnetization even in metallic superlattices. This Ni-Mn superexchange interaction can be explained in terms of polar compensation at the LaNiO$_3$-CaMnO$_3$ interface. These results highlight the different mechanisms responsible for interfacial ferromagnetism and the importance of understanding compensation due to polar mismatch at oxide-based interfaces when engineering magnetic properties. △ Less

Submitted 11 April, 2017; originally announced April 2017.

Comments: 8 pages, 5 figures

Journal ref: Phys. Rev. Materials 1, 024404 (2017)

Electronic structure and direct observation of ferrimagnetism in multiferroic hexagonal YbFeO3

Authors: Shi Cao, Kishan Sinha, Xin Zhang, Xiaozhe Zhang, Xiao Wang, Yuewei Yin, Alpha T N'Diaye, Jian Wang, David J Keavney, Tula R Paudel, Yaohua Liu, Xuemei Cheng, Evgeny Y Tsymbal, Peter A Dowben, Xiaoshan Xu

Abstract: The magnetic interaction between rare-earth and Fe ions in hexagonal rare-earth ferrites (h-REFeO3), may amplify the weak ferromagnetic moment on Fe, making these materials more appealing as multiferroics. To elucidate the interaction strength between the rare-earth and Fe ions as well as the magnetic moment of the rare-earth ions, element specific magnetic characterization is needed. Using X-ray… ▽ More The magnetic interaction between rare-earth and Fe ions in hexagonal rare-earth ferrites (h-REFeO3), may amplify the weak ferromagnetic moment on Fe, making these materials more appealing as multiferroics. To elucidate the interaction strength between the rare-earth and Fe ions as well as the magnetic moment of the rare-earth ions, element specific magnetic characterization is needed. Using X-ray magnetic circular dichroism, we have studied the ferrimagnetism in h-YbFeO3 by measuring the magnetization of Fe and Yb separately. The results directly show anti-alignment of magnetization of Yb and Fe ions in h-YbFeO3 at low temperature, with an exchange field on Yb of about 17 kOe. The magnetic moment of Yb is about 1.6 \muB at low-temperature, significantly reduced compared with the 4.5 \muB moment of a free Yb3+. In addition, the saturation magnetization of Fe in h-YbFeO3 has a sizable enhancement compared with that in h-LuFeO3. These findings directly demonstrate that ferrimagnetic order exists in h-YbFeO3; they also account for the enhancement of magnetization and the reduction of coercivity in h-YbFeO3 compared with those in h-LuFeO3 at low temperature, suggesting an important role for the rare-earth ions in tuning the multiferroic properties of h-REFeO3. △ Less

Submitted 3 June, 2017; v1 submitted 24 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. B 95, 224428 (2017)

From Fe$_3$O$_4$/NiO bilayers to NiFe$_2$O$_4$-like thin films through Ni interdiffusion

Authors: O. Kuschel, R. Buß, W. Spiess, T. Schemme, J. Wöllermann, K. Balinski, T. Kuschel, A. T. N'Diaye, J. Wollschläger, K. Kuepper

Abstract: Ferrites with (inverse) spinel structure display a large variety of electronic and magnetic properties making some of them interesting for potential applications in spintronics. We investigate the thermally induced interdiffusion of Ni$^{2+}$ ions out of NiO into Fe$_3$O$_4$ ultrathin films resulting in off-stoichiometric nickelferrite-like thin layers. We synthesized epitaxial Fe$_3$O$_4$/NiO bil… ▽ More Ferrites with (inverse) spinel structure display a large variety of electronic and magnetic properties making some of them interesting for potential applications in spintronics. We investigate the thermally induced interdiffusion of Ni$^{2+}$ ions out of NiO into Fe$_3$O$_4$ ultrathin films resulting in off-stoichiometric nickelferrite-like thin layers. We synthesized epitaxial Fe$_3$O$_4$/NiO bilayers on Nb-doped SrTiO$_3$(001) substrates by means of reactive molecular beam epitaxy. Subsequently, we performed an annealing cycle comprising three steps at temperatures of 400\,$^{\circ}$C, 600\,$^{\circ}$C, and 800\,$^{\circ}$C under an oxygen background atmosphere. We studied the changes of the chemical and electronic properties as result of each annealing step with help of hard x-ray photoelectron spectroscopy and found a rather homogenous distribution of Ni and Fe cations throughout the entire film after the overall annealing cycle. For one sample we observed a cationic distribution close to that of the spinel ferrite NiFe$_2$O$_4$. Further evidence comes from low energy electron diffraction patterns indicating a spinel type structure at the surface after annealing. Site and element specific hysteresis loops performed by x-ray magnetic circular dichroism uncovered the antiferrimagnetic alignment between the octahedral coordinated Ni$^{2+}$ and Fe$^{3+}$ ions and the Fe$^{3+}$ in tetrahedral coordination. We find a quite low coercive field of 0.02\,T, indicating a rather low defect concentration within the thin ferrite films. △ Less

Submitted 18 February, 2016; originally announced February 2016.

Comments: 9 pages, 8 figures

Journal ref: Phys. Rev. B 94, 094423 (2016)

Unconventional magnetisation texture in graphene / cobalt hybrids

Authors: A. D. Vu, J. Coraux, G. Chen, A. T. N'Diaye, A. K. Schmid, N. Rougemaille

Abstract: Magnetic domain structure and spin-dependent reflectivity measurements on cobalt thin films intercalated at the graphene / Ir(111) interface are investigated using spin-polarised low-energy electron microscopy. We find that graphene-covered cobalt films have surprising magnetic properties. Vectorial imaging of magnetic domains reveals an unusually gradual thickness-dependent spin reorientation tra… ▽ More Magnetic domain structure and spin-dependent reflectivity measurements on cobalt thin films intercalated at the graphene / Ir(111) interface are investigated using spin-polarised low-energy electron microscopy. We find that graphene-covered cobalt films have surprising magnetic properties. Vectorial imaging of magnetic domains reveals an unusually gradual thickness-dependent spin reorientation transition, in which magnetisation rotates from out-of-the-film plane to the in-plane direction by less than 10$^\circ$ per cobalt monolayer. During this transition, cobalt films have a meandering spin texture, characterised by a complex, three-dimensional, wavy magnetisation pattern. In addition, spectroscopy measurements indicate that the electronic band structure of the unoccupied states is essentially spin-independent already a few electron-Volts above the vacuum level. These properties strikingly differ from those of pristine cobalt films and could open new prospects in surface magnetism. △ Less

Submitted 26 August, 2015; originally announced August 2015.

Comments: 4 figures

Perpendicular magnetic anisotropy of cobalt films intercalated under graphene

Authors: N. Rougemaille, A. T. N'Diaye, J. Coraux, C. Vo-Van, O. Fruchart, A. K. Schmid

Abstract: Magnetic properties of nanometer thick Co films intercalated at the graphene/Ir(111) interface are investigated using spin-polarized low-energy electron microscopy (SPLEEM) and Auger electron spectroscopy. We show that the graphene top layer promotes perpendicular magnetic anisotropy in the Co film underneath, even for relatively thick intercalated deposits. The magnetic anisotropy energy is signi… ▽ More Magnetic properties of nanometer thick Co films intercalated at the graphene/Ir(111) interface are investigated using spin-polarized low-energy electron microscopy (SPLEEM) and Auger electron spectroscopy. We show that the graphene top layer promotes perpendicular magnetic anisotropy in the Co film underneath, even for relatively thick intercalated deposits. The magnetic anisotropy energy is significantly larger for the graphene/Co interface than for the free Co surface. Hybridization of the graphene and Co electron orbitals is believed to be at the origin of the observed perpendicular magnetic anisotropy. △ Less

Submitted 2 April, 2014; originally announced April 2014.

Journal ref: Appl. Phys. Lett. 101, 142403 (2012)

Real Space Imaging of the Verwey Transition at the (100) Surface of Magnetite

Authors: Juan de la Figuera, Zbynek Novotny, Martin Setvin, Tijiang Liu, Zhiqiang Mao, Gong Chen, Alpha T. N'Diaye, Michael Schmid, Ulrike Diebold, Andreas K. Schmid, Gareth S. Parkinson

Abstract: Effects of the Verwey transition on the (100) surface of magnetite were studied using scanning tunelling microscopy and spin polarized low-energy electron microsccopy. On cooling through the transition temperature Tv, the initially flat surface undergoes a roof-like distortion with a periodicity of ~0.5 um due to ferroelastic twinning within monoclinic domains of the low-temperature monoclinic str… ▽ More Effects of the Verwey transition on the (100) surface of magnetite were studied using scanning tunelling microscopy and spin polarized low-energy electron microsccopy. On cooling through the transition temperature Tv, the initially flat surface undergoes a roof-like distortion with a periodicity of ~0.5 um due to ferroelastic twinning within monoclinic domains of the low-temperature monoclinic structure. The monoclinic c axis orients in the surface plane, along the [001]c directions. At the atomic scale, the charge-ordered sqrt2xsqrt2R45 reconstruction of the (100) surface is unperturbed by the bulk transition, and is continuous over the twin boundaries. Time resolved low-energy electron microscopy movies reveal the structural transition to be first-order at the surface, indicating that the bulk transition is not an extension of the Verwey-like sqrt2xsqrt2R45 reconstruction. Although conceptually similar, the charge-ordered phases of the (100) surface and sub-Tv bulk of magnetite are unrelated phenomena. △ Less

Submitted 4 October, 2013; originally announced October 2013.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. B 88, 161410(R) (2013)

Room Temperature In-plane <100> Magnetic Easy Axis for Fe3O4/SrTiO3(001):Nb Grown by Infrared PLD

Authors: Matteo Monti, Mikel Sanz, Mohamed Oujja, Esther Rebollar, Marta Castillejo, Marta Castillejo, Alberto Bollero, Julio Camarero, Jose Luis F. Cuñado, Norbert M. Nemes, Federico J. Mompean, Mar Garcia-Hernández, Shu Nie, Kevin F. McCarty, Alpha T. N'Diaye, Gong Chen, Andreas K. Schmid, José F. Marco, Juan de la Figuera

Abstract: We examine the magnetic easy-axis directions of stoichiometric magnetite films grown on SrTiO3:Nb by infrared pulsed-laser deposition. Spin-polarized low-energy electron microscopy reveals that the individual magnetic domains are magnetized along the in-plane <100> film directions. Magneto-optical Kerr effect measurements show that the maxima of the remanence and coercivity are also along in-plane… ▽ More We examine the magnetic easy-axis directions of stoichiometric magnetite films grown on SrTiO3:Nb by infrared pulsed-laser deposition. Spin-polarized low-energy electron microscopy reveals that the individual magnetic domains are magnetized along the in-plane <100> film directions. Magneto-optical Kerr effect measurements show that the maxima of the remanence and coercivity are also along in-plane <100> film directions. This easy-axis orientation differs from bulk magnetite and films prepared by other techniques, establishing that the magnetic anisotropy can be tuned by film growth. △ Less

Submitted 25 July, 2013; originally announced July 2013.

Comments: 3 pages, 3 figures

Micromagnetism in (001) magnetite by spin-polarized low-energy electron microscopy

Authors: Juan de la Figuera, Lucía Vergara, Alpha T. N'Diaye, Adrian Quesada, Andreas K. Schmid

Abstract: Spin-polarized low-energy electron microscopy was used to image a magnetite crystal with (100) surface orientation. Sets of spin-dependent images of magnetic domain patterns observed in this surface were used to map the direction of the magnetization vector with high spatial and angular resolution. We find that domains are magnetized along the surface [110] directions, and domain wall structures i… ▽ More Spin-polarized low-energy electron microscopy was used to image a magnetite crystal with (100) surface orientation. Sets of spin-dependent images of magnetic domain patterns observed in this surface were used to map the direction of the magnetization vector with high spatial and angular resolution. We find that domains are magnetized along the surface [110] directions, and domain wall structures include 90° and 180° walls. A type of unusually curved domain walls are interpreted as Néel-capped surface terminations of 180° Bloch walls. △ Less

Submitted 18 January, 2013; originally announced January 2013.

Comments: 17 pages, 4 figures. Presented at the LEEM-PEEM 8 conference

Journal ref: Ultramicroscopy 130 (2013) 77-81

Local deformations and incommensurability of high quality epitaxial graphene on a weakly interacting transition metal

Authors: Nils Blanc, Johann Coraux, Chi Vo-Van, Alpha T. N'Diaye, Olivier Geaymond, Gilles Renaud

Abstract: We investigate the fine structure of graphene on iridium, which is a model for graphene weakly interacting with a transition metal substrate. Even the highest quality epitaxial graphene displays tiny imperfections, i.e. small biaxial strains, ca. 0.3%, rotations, ca. 0.5^{\circ}, and shears over distances of ca. 100 nm, and is found incommensurate, as revealed by X-ray diffraction and scanning tun… ▽ More We investigate the fine structure of graphene on iridium, which is a model for graphene weakly interacting with a transition metal substrate. Even the highest quality epitaxial graphene displays tiny imperfections, i.e. small biaxial strains, ca. 0.3%, rotations, ca. 0.5^{\circ}, and shears over distances of ca. 100 nm, and is found incommensurate, as revealed by X-ray diffraction and scanning tunneling microscopy. These structural variations are mostly induced by the increase of the lattice parameter mismatch when cooling down the sample from the graphene preparation temperature to the measurement temperature. Although graphene weakly interacts with iridium, its thermal expansion is found positive, contrary to free-standing graphene. The structure of graphene and its variations are very sensitive to the preparation conditions. All these effects are consistent with initial growth and subsequent pining of graphene at steps. △ Less

Submitted 7 November, 2012; v1 submitted 26 June, 2012; originally announced June 2012.

Journal ref: Physical Review B (Condensed Matter) 86 (2012) 235439

Hydrogen-induced reversible spin-reorientation transition and magnetic stripe domain phase in bilayer Co on Ru(0001)

Authors: Benito Santos, Silvia Gallego, Arantzazu Mascaraque, Kevin F. McCarty, Adrian Quesada, Alpha T. N'Diaye, Andreas K. Schmid, Juan de la Figuera

Abstract: Imaging the change in the magnetization vector in real time by spin-polarized low-energy electron microscopy, we observed a hydrogen-induced, reversible spin-reorientation transition in a cobalt bilayer on Ru(0001). Initially, hydrogen sorption reduces the size of out-of-plane magnetic domains and leads to the formation of a magnetic stripe domain pattern, which can be understood as a consequence… ▽ More Imaging the change in the magnetization vector in real time by spin-polarized low-energy electron microscopy, we observed a hydrogen-induced, reversible spin-reorientation transition in a cobalt bilayer on Ru(0001). Initially, hydrogen sorption reduces the size of out-of-plane magnetic domains and leads to the formation of a magnetic stripe domain pattern, which can be understood as a consequence of reducing the out-of-plane magnetic anisotropy. Further hydrogen sorption induces a transition to an in-plane easy-axis. Desorbing the hydrogen by heating the film to 400 K recovers the original out-of-plane magnetization. By means of ab-initio calculations we determine that the origin of the transition is the local effect of the hybridization of the hydrogen orbital and the orbitals of the Co atoms bonded to the absorbed hydrogen. △ Less

Submitted 18 March, 2012; originally announced March 2012.

Comments: 5 figures

Journal ref: Phys. Rev. B 85, 134409 (2012)

Graphene on Ir(111) characterized by angle-resolved photoemission

Authors: M. Kralj, I. Pletikosic, M. Petrovic, P. Pervan, M. Milun, A. T. N'Diaye, C. Busse, T. Michely, J. Fujii, I. Vobornik

Abstract: Angle resolved photoelectron spectroscopy (ARPES) is extensively used to characterize the dependence of the electronic structure of graphene on Ir(111) on the preparation process. ARPES findings reveal that temperature programmed growth alone or in combination with chemical vapor deposition leads to graphene displaying sharp electronic bands. The photoemission intensity of the Dirac cone is monito… ▽ More Angle resolved photoelectron spectroscopy (ARPES) is extensively used to characterize the dependence of the electronic structure of graphene on Ir(111) on the preparation process. ARPES findings reveal that temperature programmed growth alone or in combination with chemical vapor deposition leads to graphene displaying sharp electronic bands. The photoemission intensity of the Dirac cone is monitored as a function of the increasing graphene area. Electronic features of the moiré superstructure present in the system, namely minigaps and replica bands are examined and used as robust features to evaluate graphene uniformity. The overall dispersion of the pi-band is analyzed. Finally, by the variation of photon energy, relative changes of the pi- and sigma-band intensities are demonstrated. △ Less

Submitted 9 August, 2011; v1 submitted 20 May, 2011; originally announced May 2011.

Comments: 8 pages, 6 figures in published form

Journal ref: Phys. Rev. B 84, 075427 (2011)

Graphene on Ir(111): Physisorption with chemical modulation

Authors: Carsten Busse, Predrag Lazić, Rabie Djemour, Johann Coraux, Timm Gerber, Nicolae Atodiresei, Vasile Caciuc, Radovan Brako, Alpha T. N'Diaye, Stefan Blügel, Jörg Zegenhagen, Thomas Michely

Abstract: The non-local van der Waals density functional (vdW-DF) approach is applied to calculate the binding of graphene to Ir(111). The precise agreement of the calculated mean height h = 3.41 Å of the C atoms with their mean height h = (3.38 \pm 0.04) Å as measured by the X-ray standing wave (XSW) technique provides a benchmark for the applicability of the non-local functional. We find bonding of graphe… ▽ More The non-local van der Waals density functional (vdW-DF) approach is applied to calculate the binding of graphene to Ir(111). The precise agreement of the calculated mean height h = 3.41 Å of the C atoms with their mean height h = (3.38 \pm 0.04) Å as measured by the X-ray standing wave (XSW) technique provides a benchmark for the applicability of the non-local functional. We find bonding of graphene to Ir(111) to be due to the van der Waals interaction with an antibonding average contribution from chemical interaction. Despite its globally repulsive character, in certain areas of the large graphene moiré unit cell charge accumulation between Ir substrate and grapheneC atoms is observed, signaling a weak covalent bond formation. △ Less

Submitted 14 June, 2011; v1 submitted 19 May, 2011; originally announced May 2011.

Comments: accepted by Phys. Rev. Lett

A versatile fabrication method for cluster superlattices

Authors: Alpha T. N'Diaye, Timm Gerber, Carsten Busse, Josef Myslivecek, Johann Coraux, Thomas Michely

Abstract: On the graphene moire on Ir(111) a variety of highly perfect cluster superlattices can be grown as shown is for Ir, Pt, W, and Re. Even materials that do not form cluster superlattices upon room temperature deposition may be grown into such by low temperature deposition or the application of cluster seeding through Ir as shown for Au, AuIr, FeIr. Criteria for the suitability of a material to for… ▽ More On the graphene moire on Ir(111) a variety of highly perfect cluster superlattices can be grown as shown is for Ir, Pt, W, and Re. Even materials that do not form cluster superlattices upon room temperature deposition may be grown into such by low temperature deposition or the application of cluster seeding through Ir as shown for Au, AuIr, FeIr. Criteria for the suitability of a material to form a superlattice are given and largely confirmed. It is proven that at least Pt and Ir even form epitaxial cluster superlattices. The temperature stability of the cluster superlattices is investigated and understood on the basis of positional fluctuations of the clusters around their sites of minimum potential energy. The binding sites of Ir, Pt, W and Re cluster superlattices are determined and the ability to cover samples macroscopically with a variety of superlattices is demonstrated. △ Less

Submitted 26 August, 2009; originally announced August 2009.

Report number: 0908.3798

Selecting a single orientation for millimeter sized graphene sheets

Authors: R. van Gastel, A. T. N'Diaye, D. Wall, J. Coraux, C. Busse, F. -J. Meyer zu Heringdorf, N. Buckanie, M. Horn von Hoegen, T. Michely, B. Poelsema

Abstract: We have used Low Energy Electron Microscopy (LEEM) and Photo Emission Electron Microscopy (PEEM) to study and improve the quality of graphene films grown on Ir(111) using chemical vapor deposition (CVD). CVD at elevated temperature already yields graphene sheets that are uniform and of monatomic thickness. Besides domains that are aligned with respect to the substrate, other rotational variants… ▽ More We have used Low Energy Electron Microscopy (LEEM) and Photo Emission Electron Microscopy (PEEM) to study and improve the quality of graphene films grown on Ir(111) using chemical vapor deposition (CVD). CVD at elevated temperature already yields graphene sheets that are uniform and of monatomic thickness. Besides domains that are aligned with respect to the substrate, other rotational variants grow. Cyclic growth exploiting the faster growth and etch rates of the rotational variants, yields films that are 99 % composed of aligned domains. Precovering the substrate with a high density of graphene nuclei prior to CVD yields pure films of aligned domains extending over millimeters. Such films can be used to prepare cluster-graphene hybrid materials for catalysis or nanomagnetism and can potentially be combined with lift-off techniques to yield high-quality, graphene based electronic devices. △ Less

Submitted 21 July, 2009; originally announced July 2009.

In situ observation of stress relaxation in epitaxial graphene

Authors: Alpha T. N'Diaye, Raoul van Gastel, Antonio J. Martinez-Galera, Johann Coraux, Hichem Hattab, Dirk Wall, Frank-J. Meyer zu Heringdorf, Michael Horn-von Hoegen, Jose M. Gomez-Rodriguez, Bene Poelsema, Carsten Busse, Thomas Michely

Abstract: Upon cooling, branched line defects develop in epitaxial graphene grown at high temperature on Pt(111) and Ir(111). Using atomically resolved scanning tunneling microscopy we demonstrate that these defects are wrinkles in the graphene layer, i.e. stripes of partially delaminated graphene. With low energy electron microscopy (LEEM) we investigate the wrinkling phenomenon in situ. Upon temperature… ▽ More Upon cooling, branched line defects develop in epitaxial graphene grown at high temperature on Pt(111) and Ir(111). Using atomically resolved scanning tunneling microscopy we demonstrate that these defects are wrinkles in the graphene layer, i.e. stripes of partially delaminated graphene. With low energy electron microscopy (LEEM) we investigate the wrinkling phenomenon in situ. Upon temperature cycling we observe hysteresis in the appearance and disappearance of the wrinkles. Simultaneously with wrinkle formation a change in bright field imaging intensity of adjacent areas and a shift in the moire spot positions for micro diffraction of such areas takes place. The stress relieved by wrinkle formation results from the mismatch in thermal expansion coefficients of graphene and the substrate. A simple one-dimensional model taking into account the energies related to strain, delamination and bending of graphene is in qualitative agreement with our observations. △ Less

Submitted 15 September, 2009; v1 submitted 4 June, 2009; originally announced June 2009.

Comments: Supplementary information: S1: Photo electron emission microscopy and LEEM measurements of rotational domains, STM data of a delaminated bulge around a dislocation. S2: Movie with increasing brightness upon wrinkle formation as in figure 4. v2: Major revision including new experimental data

Dirac Cones and Minigaps for Graphene on Ir(111)

Authors: I. Pletikosic, M. Kralj, P. Pervan, R. Brako, J. Coraux, A. T. N'Diaye, C. Busse, T. Michely

Abstract: Epitaxial graphene on Ir(111) prepared in excellent structural quality is investigated by angle-resolved photoelectron spectroscopy. It clearly displays a Dirac cone with the Dirac point shifted only slightly above the Fermi level. The moire resulting from the overlaid graphene and Ir(111) surface lattices imposes a superperiodic potential giving rise to Dirac cone replicas and the opening of mi… ▽ More Epitaxial graphene on Ir(111) prepared in excellent structural quality is investigated by angle-resolved photoelectron spectroscopy. It clearly displays a Dirac cone with the Dirac point shifted only slightly above the Fermi level. The moire resulting from the overlaid graphene and Ir(111) surface lattices imposes a superperiodic potential giving rise to Dirac cone replicas and the opening of minigaps in the band structure. △ Less

Submitted 13 February, 2009; v1 submitted 17 July, 2008; originally announced July 2008.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 102, 056808 (2009)