-
Effect of Magnetic Anisotropy Constants on Skyrmion Formation in Co/Pt
Authors:
Tamali Mukherjee,
V Satya Narayana Murthy
Abstract:
Skyrmions, which are topologically stable magnetic structures, have manifested promising features to be used as an information carrier in new-age, non-volatile data storage devices. In this article, we show how the creation and stability of skyrmion can be manipulated by external stimuli (here, nano-second current pulse). Co/Pt square nano-structure with Co free layer thickness in the range 1 nm t…
▽ More
Skyrmions, which are topologically stable magnetic structures, have manifested promising features to be used as an information carrier in new-age, non-volatile data storage devices. In this article, we show how the creation and stability of skyrmion can be manipulated by external stimuli (here, nano-second current pulse). Co/Pt square nano-structure with Co free layer thickness in the range 1 nm to 5 nm and first and second-order anisotropy constants are taken to study the controlled creation of skyrmions. The magnetization dynamics controlled by the current-induced spin transfer torque help to nucleate skyrmions by transformation from perpendicularly magnetized ground state to a stable state of isolated skyrmions via complex transformation of Neel wall following its image inversion. Compared with the first-order anisotropy alone, how the higher-order anisotropy constants (up to second order) impact the relaxed state of a system has been discussed.
△ Less
Submitted 25 February, 2024;
originally announced February 2024.
-
Quantum Materials Group Annual Report 2022
Authors:
P. Kumari,
S. Rani,
S. Kar,
T. Mukherjee,
S. Majumder,
K. Kumari,
S. J. Ray
Abstract:
The Quantum Materials group at Indian Institute of Technology Patna is working on a range of topics relating to nanoelectronics, spintronics, clean energy and memory design etc. The PI has past experiences of working extensively with superconducting systems like cuprates [1, 2], ruthanate [3], pnictide [4, 5], thin film heterostructures [6, 7] etc and magnetic recording media [8, 9] etc. In this r…
▽ More
The Quantum Materials group at Indian Institute of Technology Patna is working on a range of topics relating to nanoelectronics, spintronics, clean energy and memory design etc. The PI has past experiences of working extensively with superconducting systems like cuprates [1, 2], ruthanate [3], pnictide [4, 5], thin film heterostructures [6, 7] etc and magnetic recording media [8, 9] etc. In this report, we have summarised the ongoing works in our group. We explored a range of functional materials like two-dimensional materials, oxides. topological insulators, organic materials etc. using a combination of experimnetal and computational tools. Some of the useful highlights are as follows: (a) tuning and control of the magnetic and electronic state of 2D magentic materials with rapid enhancement in the Curie temperature, (b) Design and detection of single electron transistor based nanosensors for the detection of biological species with single molecular resolution, (c) Observation of non-volatile memory behaviour in the hybrid structures made of perovskite materials and 2D hybrids. The results offer useful insight in the design of nanoelectronic architecrures for diverse applications.
△ Less
Submitted 13 October, 2023; v1 submitted 30 September, 2023;
originally announced October 2023.
-
Combining Synchrotron X-ray Diffraction, Mechanistic Modeling, and Machine Learning for In Situ Subsurface Temperature Quantification during Laser Melting
Authors:
Rachel E. Lim,
Tuhin Mukherjee,
Chihpin Chuang,
Thien Q. Phan,
Tarasankar DebRoy,
Darren C. Pagan
Abstract:
Laser melting, such as that encountered during additive manufacturing (AM), produces extreme gradients of temperature in both space and time, which in turn influence microstructural development in the material. Qualification and model validation of the process itself and resulting material produced necessitates the ability to characterize these temperature fields. However, well-established means t…
▽ More
Laser melting, such as that encountered during additive manufacturing (AM), produces extreme gradients of temperature in both space and time, which in turn influence microstructural development in the material. Qualification and model validation of the process itself and resulting material produced necessitates the ability to characterize these temperature fields. However, well-established means to directly probe material temperature below the surface of an alloy while it is being processed are limited. To address this gap in characterization capabilities, we present a novel means to extract subsurface temperature distribution metrics, with uncertainty, from in situ synchrotron X-ray diffraction measurements to provide quantitative temperature evolution during laser melting. Temperature distribution metrics are determined using Gaussian Process Regression supervised machine learning surrogate models trained with a combination of mechanistic modeling (heat transfer and fluid flow) and X-ray diffraction simulation. Trained surrogate model uncertainties are found to range from 5% to 15% depending on the metric and current temperature. The surrogate models are then applied to experimental data to extract temperature metrics from an Inconel 625 nickel superalloy wall specimen during laser melting. Maximum temperatures of the solid phase in the diffraction volume through melting and cooling are found to reach the solidus temperature as expected, with mean and minimum temperatures found to be several hundred degrees less. The extracted temperature metrics near melting are determined to be more accurate due to the lower relative levels of mechanical elastic strains. However, uncertainties for temperature metrics during cooling are increased due to the effects of thermomechanical stress.
△ Less
Submitted 1 May, 2023; v1 submitted 6 February, 2023;
originally announced February 2023.
-
Escape kinetics of self-propelled particles from a circular cavity
Authors:
Tanwi Debnath,
Pinaki Chaudhury,
Taritra Mukherjee,
Debasish Mondal,
Pulak K. Ghosh
Abstract:
We numerically investigate the mean exit time of an inertial active Brownian particle from a circular cavity with single or multiple exit windows. Our simulation results witness distinct escape mechanisms depending upon the relative amplitudes of the thermal length and self-propulsion length compared to the cavity and pore sizes. For exceedingly large self-propulsion lengths, overdamped active par…
▽ More
We numerically investigate the mean exit time of an inertial active Brownian particle from a circular cavity with single or multiple exit windows. Our simulation results witness distinct escape mechanisms depending upon the relative amplitudes of the thermal length and self-propulsion length compared to the cavity and pore sizes. For exceedingly large self-propulsion lengths, overdamped active particles diffuse on the cavity surface, and rotational dynamics solely governs the exit process. On the other hand, the escape kinetics of a very weakly damped active particle is largely dictated by bouncing effects on the cavity walls irrespective of the amplitude of self-propulsion persistence lengths. We show that the exit rate can be maximized for an optimal self-propulsion persistence length, which depends on the dam** strength, self-propulsion velocity, and cavity size. However, the optimal persistence length is insensitive to the opening windows' size, number, and arrangement. Numerical results have been interpreted analytically based on qualitative arguments. The present analysis aims to understand the transport controlling mechanism of active matter in confined structures.
△ Less
Submitted 1 November, 2021;
originally announced November 2021.
-
Substrate Induced Molecular Conformations in Rubrene Thin Films: A Thickness Dependent Study
Authors:
Sumona Sinha,
Chia-Hsin Wang,
Manbendra Mukherjee,
Tapas Mukherjee
Abstract:
A systematic experimental and theoretical study about substrate induced molecular conformation in rubrene thin films by varying film thickness from sub-monolayer to multilayer, which currently attracts substantial attention with regard to its application in organic electronics, is performed. The clean polycrystalline Au and Ag were used as noble-metals, whereas, H passivated and SiO2 terminated Si…
▽ More
A systematic experimental and theoretical study about substrate induced molecular conformation in rubrene thin films by varying film thickness from sub-monolayer to multilayer, which currently attracts substantial attention with regard to its application in organic electronics, is performed. The clean polycrystalline Au and Ag were used as noble-metals, whereas, H passivated and SiO2 terminated Si (100) were used as dielectric substrates. Angle dependent near edge x-ray absorption fine structure spectroscopy (NEXAFS) was employed to understand the molecular conformation whereas atomic force microscopy (AFM) was used to investigate the surface morphologies of the films. X-ray absorption spectra (XAS) of rubrene molecules with flat and twisted conformations were calculated using density functional theory (DFT). All the observed NEXAFS spectra of rubrene thin films at various thicknesses and onto different substrates were explained in terms of different combination of the spectral intensity from the twisted and the flat molecules. In contrast to general findings, comparatively rough polycrystalline Ag surface is found to support growth of better quality rubrene films. The results have important implications for the understanding of the substrate induced molecular conformations in rubrene thin films with its thickness and are beneficial for the improvement of the device performance.
△ Less
Submitted 24 November, 2016;
originally announced November 2016.
