-
Neural-network-supported basis optimizer for the configuration interaction problem in quantum many-body clusters: Feasibility study and numerical proof
Authors:
Pavlo Bilous,
Louis Thirion,
Henri Menke,
Maurits W. Haverkort,
Adriana Pálffy,
Philipp Hansmann
Abstract:
A deep-learning approach to optimize the selection of Slater determinants in configuration interaction calculations for condensed-matter quantum many-body systems is developed. We exemplify our algorithm on the discrete version of the single-impurity Anderson model with up to 299 bath sites. Employing a neural network classifier and active learning, our algorithm enhances computational efficiency…
▽ More
A deep-learning approach to optimize the selection of Slater determinants in configuration interaction calculations for condensed-matter quantum many-body systems is developed. We exemplify our algorithm on the discrete version of the single-impurity Anderson model with up to 299 bath sites. Employing a neural network classifier and active learning, our algorithm enhances computational efficiency by iteratively identifying the most relevant Slater determinants for the ground-state wavefunction. We benchmark our results against established methods and investigate the efficiency of our approach as compared to other basis truncation schemes. Our algorithm demonstrates a substantial improvement in the efficiency of determinant selection, yielding a more compact and computationally manageable basis without compromising accuracy. Given the straightforward application of our neural network-supported selection scheme to other model Hamiltonians of quantum many-body clusters, our algorithm can significantly advance selective configuration interaction calculations in the context of correlated condensed matter.
△ Less
Submitted 31 May, 2024;
originally announced June 2024.
-
Multi-scale flow, permeability, and heat transport in low-carbon and traditional building materials
Authors:
Hannah P. Menke,
Katherine M. Hood,
Kamaljit Singh,
Gabriela M. Medero,
Julien Maes
Abstract:
Permeability and heat transport through building materials ultimately dictates their insulatory performance over a buildings service lifetime. Experiments combining XCT with numerical modelling are an accepted method of studying pore scale processes and have been used extensively in the oil and gas industry to study highly complex reservoir rocks. However, despite the obvious similarities in struc…
▽ More
Permeability and heat transport through building materials ultimately dictates their insulatory performance over a buildings service lifetime. Experiments combining XCT with numerical modelling are an accepted method of studying pore scale processes and have been used extensively in the oil and gas industry to study highly complex reservoir rocks. However, despite the obvious similarities in structure and application, these techniques have not yet been widely adopted by the building and construction industry. An experimental investigation was performed on the pore structure of several building materials, including conventional, historic, and innovative, using XCT and direct numerical simulation. Six samples were imaged at between a 4 and 15 micron resolution inside a micro-CT scanner. The porosity and connectivity were extracted with the grain, throat, and pore size distributions using image analysis. The permeability, velocity, and thermal conductivity were then investigated using GeoChemFoam, our highly-versatile and open source numerical solver. It was found that each material had a unique, heterogeneous and sometimes multi-scale structure that had a large impact on the permeability and thermal conductivity. Furthermore, it was found that the method of including sub-resolution porosity directly effected these bulk property calculations for both parameters, especially in the materials with high structural heterogeneity. This is the first multi-scale study of structure, flow and heat transport on building materials and this workflow could easily be adapted to understand and improve designs in other industries that use porous materials such as fuel cells and batteries technology, lightweight materials and insulation, and semiconductors.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Superconductivity and Mottness in Organic Charge Transfer Materials
Authors:
Henri Menke,
Marcel Klett,
Kazushi Kanoda,
Antoine Georges,
Michel Ferrero,
Thomas Schäfer
Abstract:
The phase diagrams of quasi two-dimensional organic superconductors display a plethora of fundamental phenomena associated with strong electron correlations, such as unconventional superconductivity, metal-insulator transitions, frustrated magnetism and spin liquid behavior. We analyze a minimal model for these compounds, the Hubbard model on an anisotropic triangular lattice, using cutting-edge q…
▽ More
The phase diagrams of quasi two-dimensional organic superconductors display a plethora of fundamental phenomena associated with strong electron correlations, such as unconventional superconductivity, metal-insulator transitions, frustrated magnetism and spin liquid behavior. We analyze a minimal model for these compounds, the Hubbard model on an anisotropic triangular lattice, using cutting-edge quantum embedding methods respecting the lattice symmetry. We demonstrate the existence of unconventional superconductivity by directly entering the symmetry-broken phase. We show that the crossover from the Fermi liquid metal to the Mott insulator is associated with the formation of a pseudogap. The predicted momentum-selective destruction of the Fermi surface into hot and cold regions provides motivation for further spectroscopic studies. Our results are in remarkable agreement with experimental phase diagrams of $κ$-BEDT organics.
△ Less
Submitted 27 February, 2024; v1 submitted 19 January, 2024;
originally announced January 2024.
-
Single- and two-particle observables in the Emery model: a dynamical mean-field perspective
Authors:
Yi-Ting Tseng,
M. O. Malcolms,
Henri Menke,
Marcel Klett,
Thomas Schäfer,
P. Hansmann
Abstract:
We compare the dynamical mean-field descriptions of the single-band Hubbard model and the three-band Emery model at the one- and two-particle level for parameters relevant to high-Tc superconductors. We show that even within dynamical mean-field theory, accounting solely for temporal fluctuations, the intrinsic multi-orbital nature of the Emery model introduces effective non-local correlations. Th…
▽ More
We compare the dynamical mean-field descriptions of the single-band Hubbard model and the three-band Emery model at the one- and two-particle level for parameters relevant to high-Tc superconductors. We show that even within dynamical mean-field theory, accounting solely for temporal fluctuations, the intrinsic multi-orbital nature of the Emery model introduces effective non-local correlations. These lead to a non-Curie-like temperature-dependence of the magnetic susceptibility, also seen in nuclear magnetic resonance experiments in the pseudogap regime by M. Avramovska, et al. [Journal of Superconductivity and Novel Magnetism 33, 2621 (2020)]. We demonstrate the agreement of our results with these experiments for a large range of do**s and trace back the effective non-local correlations to an emerging oxygen-copper singlet by analyzing a minimal finite-size cluster model. Despite this correct description of the hallmark of the pseudogap at the two-particle level, i.e., the drop in the Knight shift of nuclear magnetic resonance, dynamical mean-field theory fails to properly describe the spectral properties of the pseudogap.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
Mott transition and pseudogap of the square-lattice Hubbard model: results from center-focused cellular dynamical mean-field theory
Authors:
Michael Meixner,
Henri Menke,
Marcel Klett,
Sarah Heinzelmann,
Sabine Andergassen,
Philipp Hansmann,
Thomas Schäfer
Abstract:
The recently proposed center-focused post-processing procedure [Phys. Rev. Research 2, 033476 (2020)] of cellular dynamical mean-field theory suggests that central sites of large impurity clusters are closer to the exact solution of the Hubbard model than the edge sites. In this paper, we systematically investigate results in the spirit of this center-focused scheme for several cluster sizes up to…
▽ More
The recently proposed center-focused post-processing procedure [Phys. Rev. Research 2, 033476 (2020)] of cellular dynamical mean-field theory suggests that central sites of large impurity clusters are closer to the exact solution of the Hubbard model than the edge sites. In this paper, we systematically investigate results in the spirit of this center-focused scheme for several cluster sizes up to $8\times 8$ in and out of particle-hole symmetry. First we analyze the metal-insulator crossovers and transitions of the half-filled Hubbard model on a simple square lattice. We find that the critical interaction of the crossover is reduced with increasing cluster sizes and the critical temperature abruptly drops for the $4\times 4$ cluster. Second, for this cluster size, we apply the center-focused scheme to a system with more realistic tight-binding parameters, investigating its pseudogap regime as a function of temperature and do**, where we find do** dependent metal-insulator crossovers, Lifshitz transitions and a strongly renormalized Fermi-liquid regime. Additionally to diagnosing the real space origin of the suppressed antinodal spectral weight in the pseudogap regime, we can infer hints towards underlying charge ordering tendencies.
△ Less
Submitted 15 January, 2024; v1 submitted 26 October, 2023;
originally announced October 2023.
-
A superlattice approach to do** infinite-layer nickelates
Authors:
R. A. Ortiz,
H. Menke,
F. Misják,
D. T. Mantadakis,
K. Fürsich,
E. Schierle,
G. Logvenov,
U. Kaiser,
B. Keimer,
P. Hansmann,
E. Benckiser
Abstract:
The recent observation of superconductivity in infinite-layer Nd$_{1-x}$Sr$_x$NiO$_2$ thin films has attracted a lot of attention, since this compound is electronically and structurally analogous to the superconducting cuprates. Due to the challenges in the phase stabilization upon chemical do** with Sr, we synthesized artificial superlattices of LaNiO$_3$ embedded in insulating LaGaO$_3$, and u…
▽ More
The recent observation of superconductivity in infinite-layer Nd$_{1-x}$Sr$_x$NiO$_2$ thin films has attracted a lot of attention, since this compound is electronically and structurally analogous to the superconducting cuprates. Due to the challenges in the phase stabilization upon chemical do** with Sr, we synthesized artificial superlattices of LaNiO$_3$ embedded in insulating LaGaO$_3$, and used layer-selective topotactic reactions to reduce the nickelate layers to LaNiO$_{2}$. Hole do** is achieved via interfacial oxygen atoms and tuned via the layer thickness. We used electrical transport measurements, transmission electron microscopy, and x-ray spectroscopy together with ab initio calculations to track changes in the local nickel electronic configuration upon reduction and found that these changes are reversible. Our experimental and theoretical data indicate that the doped holes are trapped at the interfacial quadratic pyramidal Ni sites. Calculations for electron-doped cases predict a different behavior, with evenly distributed electrons among the layers, thus opening up interesting perspectives for interfacial do** of transition metal oxides.
△ Less
Submitted 16 June, 2021; v1 submitted 10 February, 2021;
originally announced February 2021.
-
Upscaling the porosity-permeability relationship of a microporous carbonate to the Darcy scale with machine learning
Authors:
Hannah P. Menke,
Julien Maes,
Sebastian Geiger
Abstract:
The permeability of a pore structure is typically described by stochastic representations of its geometrical attributes. Database-driven numerical solvers for large model domains can only accurately predict large-scale flow behaviour when they incorporate upscaled descriptions of that structure. The upscaling is particularly challenging for rocks with multimodal porosity structures such as carbona…
▽ More
The permeability of a pore structure is typically described by stochastic representations of its geometrical attributes. Database-driven numerical solvers for large model domains can only accurately predict large-scale flow behaviour when they incorporate upscaled descriptions of that structure. The upscaling is particularly challenging for rocks with multimodal porosity structures such as carbonates, where several different types of structures are interacting. It is the connectivity both within and between these different structures that controls the porosity-permeability relationship at the larger length scales. Recent advances in machine learning combined with numerical modelling and structural analysis have allowed us to probe the relationship between structure and permeability more deeply. We have used this integrated approach to tackle the challenge of upscaling multimodal and multiscale porous media. We present a novel method for upscaling multimodal porosity-permeability relationships using machine learning based multivariate structural regression. A m-CT image of limestone was divided into sub-volumes and permeability was computed using the DBS model. The porosity-permeability relationship from Menke et al. was used to assign permeability values to the microporosity. Structural attributes of each sub-volume were extracted and then regressed against the solved permeability using an Extra-Trees regression model to derive an upscaled porosity-permeability relationship. Ten upscaled test cases were then modelled at the Darcy scale using the regression and benchmarked against full DBS simulations, a numerically upscaled Darcy model, and a K-C fit. We found good agreement between the full DBS simulations and both the numerical and machine learning upscaled models while the K-C model was a poor predictor in all cases.
△ Less
Submitted 23 September, 2020;
originally announced October 2020.
-
Stabilizing Even-Parity Chiral Superconductivity in Sr$_2$RuO$_4$
Authors:
Han Gyeol Suh,
Henri Menke,
P. M. R. Brydon,
Carsten Timm,
Aline Ramires,
Daniel F. Agterberg
Abstract:
Strontium ruthenate (Sr$_2$RuO$_4$) has long been thought to host a spin-triplet chiral $p$-wave superconducting state. However, the singletlike response observed in recent spin-susceptibility measurements casts serious doubts on this pairing state. Together with the evidence for broken time-reversal symmetry and a jump in the shear modulus $c_{66}$ at the superconducting transition temperature, t…
▽ More
Strontium ruthenate (Sr$_2$RuO$_4$) has long been thought to host a spin-triplet chiral $p$-wave superconducting state. However, the singletlike response observed in recent spin-susceptibility measurements casts serious doubts on this pairing state. Together with the evidence for broken time-reversal symmetry and a jump in the shear modulus $c_{66}$ at the superconducting transition temperature, the available experiments point towards an even-parity chiral superconductor with $k_z(k_x\pm ik_y)$-like $E_g$ symmetry, which has consistently been dismissed based on the quasi-two-dimensional electronic structure of Sr$_2$RuO$_4$. Here, we show how the orbital degree of freedom can encode the two-component nature of the $E_g$ order parameter, allowing for a local orbital-antisymmetric spin-triplet state that can be stabilized by on-site Hund's coupling. We find that this exotic $E_g$ state can be energetically stable once a complete, realistic three-dimensional model is considered, within which momentum-dependent spin-orbit coupling terms are key. This state naturally gives rise to Bogoliubov Fermi surfaces.
△ Less
Submitted 21 July, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
Bogoliubov Fermi surfaces stabilized by spin-orbit coupling
Authors:
Henri Menke,
C. Timm,
P. M. R. Brydon
Abstract:
It was recently understood that centrosymmetric multiband superconductors that break time-reversal symmetry generically show Fermi surfaces of Bogoliubov quasiparticles. We investigate the thermodynamic stability of these Bogoliubov Fermi surfaces in a paradigmatic model. To that end, we construct the mean-field phase diagram as a function of spin-orbit coupling and temperature. It confirms the pr…
▽ More
It was recently understood that centrosymmetric multiband superconductors that break time-reversal symmetry generically show Fermi surfaces of Bogoliubov quasiparticles. We investigate the thermodynamic stability of these Bogoliubov Fermi surfaces in a paradigmatic model. To that end, we construct the mean-field phase diagram as a function of spin-orbit coupling and temperature. It confirms the prediction that a pairing state with Bogoliubov Fermi surfaces can be stabilized at moderate spin-orbit coupling strengths. The multiband nature of the model also gives rise to a first-order phase transition, which can be explained by the competition of intra- and interband pairing and is strongly affected by cubic anisotropy. For the state with Bogoliubov Fermi surfaces, we also discuss experimental signatures in terms of the residual density of states and the induced magnetic order. Our results show that Bogoliubov Fermi surfaces of experimentally relevant size can be thermodynamically stable.
△ Less
Submitted 8 December, 2019; v1 submitted 24 September, 2019;
originally announced September 2019.
-
ESPResSo 4.0 -- An Extensible Software Package for Simulating Soft Matter Systems
Authors:
Florian Weik,
Rudolf Weeber,
Kai Szuttor,
Konrad Breitsprecher,
Joost de Graaf,
Michael Kuron,
Jonas Landsgesell,
Henri Menke,
David Sean,
Christian Holm
Abstract:
ESPResSo 4.0 is an extensible simulation package for research on soft matter. This versatile molecular dynamics program was originally developed for coarse-grained simulations of charged systems Limbach et al., Comput. Phys. Commun. 174, 704 (2006). The scope of the software has since broadened considerably: ESPResSo can now be used to simulate systems with length scales spanning from the molecula…
▽ More
ESPResSo 4.0 is an extensible simulation package for research on soft matter. This versatile molecular dynamics program was originally developed for coarse-grained simulations of charged systems Limbach et al., Comput. Phys. Commun. 174, 704 (2006). The scope of the software has since broadened considerably: ESPResSo can now be used to simulate systems with length scales spanning from the molecular to the colloidal. Examples include, self-propelled particles in active matter, membranes in biological systems, and the aggregation of soot particles in process engineering. ESPResSo also includes solvers for hydrodynamic and electrokinetic problems, both on the continuum and on the explicit particle level. Since our last description of version 3.1 Arnold et al., Meshfree Methods for Partial Differential Equations VI, Lect. Notes Comput. Sci. Eng. 89, 1 (2013), the software has undergone considerable restructuring. The biggest change is the replacement of the Tcl scripting interface with a much more powerful Python interface. In addition, many new simulation methods have been implemented. In this article, we highlight the changes and improvements made to the interface and code, as well as the new simulation techniques that enable a user of ESPResSo 4.0 to simulate physics that is at the forefront of soft matter research.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Bogoliubov Fermi surfaces: General theory, magnetic order, and topology
Authors:
P. M. R. Brydon,
D. F. Agterberg,
Henri Menke,
C. Timm
Abstract:
We present a comprehensive theory for Bogoliubov Fermi surfaces in inversion-symmetric superconductors which break time-reversal symmetry. A requirement for such a gap structure is that the electrons posses internal degrees of freedom apart from the spin (e.g., orbital or sublattice indices), which permits a nontrivial internal structure of the Cooper pairs. We develop a general theory for such a…
▽ More
We present a comprehensive theory for Bogoliubov Fermi surfaces in inversion-symmetric superconductors which break time-reversal symmetry. A requirement for such a gap structure is that the electrons posses internal degrees of freedom apart from the spin (e.g., orbital or sublattice indices), which permits a nontrivial internal structure of the Cooper pairs. We develop a general theory for such a pairing state, which we show to be nonunitary. A time-reversal-odd component of the nonunitary gap product is found to be essential for the appearance of Bogoliubov Fermi surfaces. These Fermi surfaces are topologically protected by a $\mathbb{Z}_2$ invariant. We examine their appearance in a generic low-energy effective model and then study two specific microscopic models supporting Bogoliubov Fermi surfaces: a cubic material with a $j=3/2$ total-angular-momentum degree of freedom and a hexagonal material with distinct orbital and spin degrees of freedom. The appearance of Bogoliubov Fermi surfaces is accompanied by a magnetization of the low-energy states, which we connect to the time-reversal-odd component of the gap product. We additionally calculate the surface spectra associated with these pairing states and demonstrate that the Bogoliubov Fermi surfaces are characterized by additional topological indices. Finally, we discuss the extension of phenomenological theories of superconductors to include Bogoliubov Fermi surfaces, and identify the time-reversal-odd part of the gap product as a composite order parameter which is intertwined with superconductivity.
△ Less
Submitted 10 June, 2018;
originally announced June 2018.
-
Topological quantum wires with balanced gain and loss
Authors:
Henri Menke,
Moritz M. Hirschmann
Abstract:
We study a one-dimensional topological superconductor, the Kitaev chain, under the influence of a non-Hermitian but $\mathcal{PT}$-symmetric potential. This potential introduces gain and loss in the system in equal parts. We show that the stability of the topological phase is influenced by the gain/loss strength and explicitly derive the bulk topological invariant in a bipartite lattice as well as…
▽ More
We study a one-dimensional topological superconductor, the Kitaev chain, under the influence of a non-Hermitian but $\mathcal{PT}$-symmetric potential. This potential introduces gain and loss in the system in equal parts. We show that the stability of the topological phase is influenced by the gain/loss strength and explicitly derive the bulk topological invariant in a bipartite lattice as well as compute the corresponding phase diagram using analytical and numerical methods. Furthermore we find that the edge state is exponentially localized near the ends of the wire despite the presence of gain and loss of probability amplitude in that region.
△ Less
Submitted 11 May, 2017; v1 submitted 31 January, 2017;
originally announced January 2017.
-
Understanding the Onset of Oscillatory Swimming in Microchannels
Authors:
Joost de Graaf,
Arnold J. T. M. Mathijssen,
Marc Fabritius,
Henri Menke,
Christian Holm,
Tyler N. Shendruk
Abstract:
Self-propelled colloids (swimmers) in confining geometries follow trajectories determined by hydrodynamic interactions with the bounding surfaces. However, typically these interactions are ignored or truncated to lowest order. We demonstrate that higher-order hydrodynamic moments cause rod-like swimmers to follow oscillatory trajectories in quiescent fluid between two parallel plates, using a comb…
▽ More
Self-propelled colloids (swimmers) in confining geometries follow trajectories determined by hydrodynamic interactions with the bounding surfaces. However, typically these interactions are ignored or truncated to lowest order. We demonstrate that higher-order hydrodynamic moments cause rod-like swimmers to follow oscillatory trajectories in quiescent fluid between two parallel plates, using a combination of lattice-Boltzmann simulations and far-field calculations. This behavior occurs even far from the confining walls and does not require lubrication results. We show that a swimmer's hydrodynamic quadrupole moment is crucial to the onset of the oscillatory trajectories. This insight allows us to develop a simple model for the dynamics near the channel center based on these higher hydrodynamic moments, and suggests opportunities for trajectory-based experimental characterization of swimmers' hydrodynamic properties.
△ Less
Submitted 3 May, 2016;
originally announced May 2016.
-
Lattice-Boltzmann Hydrodynamics of Anisotropic Active Matter
Authors:
Joost de Graaf,
Henri Menke,
Arnold J. T. M. Mathijssen,
Marc Fabritius,
Christian Holm,
Tyler N. Shendruk
Abstract:
A plethora of active matter models exist that describe the behavior of self-propelled particles (or swimmers), both with and without hydrodynamics. However, there are few studies that consider shape-anisotropic swimmers and include hydrodynamic interactions. Here, we introduce a simple method to simulate self-propelled colloids interacting hydrodynamically in a viscous medium using the lattice-Bol…
▽ More
A plethora of active matter models exist that describe the behavior of self-propelled particles (or swimmers), both with and without hydrodynamics. However, there are few studies that consider shape-anisotropic swimmers and include hydrodynamic interactions. Here, we introduce a simple method to simulate self-propelled colloids interacting hydrodynamically in a viscous medium using the lattice-Boltzmann technique. Our model is based on raspberry-type viscous coupling and a force/counter-force formalism which ensures that the system is force free. We consider several anisotropic shapes and characterize their hydrodynamic multipolar flow field. We demonstrate that shape-anisotropy can lead to the presence of a strong quadrupole and octupole moments, in addition to the principle dipole moment. The ability to simulate and characterize these higher-order moments will prove crucial for understanding the behavior of model swimmers in confining geometries.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
