Showing 1–38 of 38 results for author: McKinley, G H

High-frequency Optimally Windowed Chirp rheometry for rapidly evolving viscoelastic materials: application to a crosslinking thermoset

Authors: Thanasis Athanasiou, Michela Geri, Patrice Roose, Gareth H. McKinley, George Petekidis

Abstract: Abstract Knowledge of the evolution of mechanical properties of the curing matrix is of great importance in composite parts or structure fabrication. Conventional rheometry, based on small amplitude oscillatory shear is limited by long interrogation times. In rapidly evolving materials, time sweeps can provide a meaningful measurement albeit at a single frequency. To overcome this constraint we… ▽ More Abstract Knowledge of the evolution of mechanical properties of the curing matrix is of great importance in composite parts or structure fabrication. Conventional rheometry, based on small amplitude oscillatory shear is limited by long interrogation times. In rapidly evolving materials, time sweeps can provide a meaningful measurement albeit at a single frequency. To overcome this constraint we utilize a combined frequency and amplitude-modulated chirped strain waveform in conjunction with a home-made sliding plate piezo-operated (PZR) and a dual-head commercial rotational rheometer (Anton Paar MCR 702) to probe the linear viscoelasticity of these time-evolving materials. The direct controllability of the PZR resulting from the absence of any kind of firmware and the microsecond actuator-sensor response renders this device ideal for exploring the advantages of this technique. The high frequency capability allows us to extend the upper limits of the accessible linear viscoelastic spectrum and most importantly, to shorten the length of the interrogating strain signal (OWCh-PZR) to sub-second scales, while retaining a high time-bandwidth product. This short duration ensures that the mutation number (NMu) is kept sufficiently low, even in fast curing resins. The method is validated via calibration tests in both instruments and the corresponding limitations are discussed. As a proof of concept the technique is applied to a curing vinylester resin. The linear viscoelastic (LVE) spectrum is assessed every 20 seconds to monitor the rapid evolution of the time- and frequency-dependence of the complex modulus. Finally, FTIR spectroscopy is utilized to gain insights on the evolution of the chemical network while the gap-dependence of the evolving material properties in these heterogeneous systems is also investigated. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Strain stiffening universality in composite hydrogels and soft tissues

Authors: Jake Song, Elad Deiss-Yehiely, Serra Yesilata, Gareth H. McKinley

Abstract: Soft biological tissues exhibit a remarkable resilience to large mechanical loads, a property which is associated with the strain stiffening capability of the biopolymer networks that structurally support the tissues. Yet, recent studies have shown that composite systems such as tissues and blood clots exhibit mechanical properties that contradict those of the polymer matrix - demonstrating stiffe… ▽ More Soft biological tissues exhibit a remarkable resilience to large mechanical loads, a property which is associated with the strain stiffening capability of the biopolymer networks that structurally support the tissues. Yet, recent studies have shown that composite systems such as tissues and blood clots exhibit mechanical properties that contradict those of the polymer matrix - demonstrating stiffening in compression, but softening in shear and tension. The microscopic basis of this apparent paradox remains poorly understood. We show that composite hydrogels and tissues do indeed exhibit non-linear elastic stiffening in shear - which is governed by the stretching of the polymer chains in the matrix - and that it is driven by the same mechanism that drives compression stiffening. However, we show that the non-linear elastic stiffening in composite hydrogels and tissues is masked by mechanical dissipation arising from filler-polymer interactions known as the Mullins effect, and we introduce a method to characterize the non-linear elasticity of the composites in isolation from this overall strain softening response through large-amplitude oscillatory shear experiments. We present a comprehensive characterization of the non-linear elastic strain stiffening of composite hydrogels and soft tissues, and show that the strain stiffening in shear and compression are both governed by universal strain amplification factors that depend on essential properties of the composite system, such as the filler concentration and the filler-polymer interaction strength. These results elucidate the microscopic mechanisms governing the non-linear mechanics of tissues, which provides design principles for engineering tissue-mimetic soft materials, and have broad implications for cell-matrix mechanotransduction in living tissues under strain. △ Less

Submitted 15 March, 2024; v1 submitted 21 July, 2023; originally announced July 2023.

Anomalous crystalline ordering of particles in a viscoelastic fluid under high shear

Authors: Sijie Sun, Nan Xue, Stefano Aime, Hyoungsoo Kim, Jizhou Tang, Gareth H. McKinley, Howard A. Stone, David A. Weitz

Abstract: Addition of particles to a viscoelastic suspension dramatically alters the properties of the mixture, particularly when it is sheared or otherwise processed. Shear-induced stretching of the polymers results in elastic stress that causes a substantial increase in measured viscosity with increasing shear, and an attractive interaction between particles, leading to their chaining. At even higher shea… ▽ More Addition of particles to a viscoelastic suspension dramatically alters the properties of the mixture, particularly when it is sheared or otherwise processed. Shear-induced stretching of the polymers results in elastic stress that causes a substantial increase in measured viscosity with increasing shear, and an attractive interaction between particles, leading to their chaining. At even higher shear rates, the flow becomes unstable, even in the absence of particles. This instability makes it very difficult to determine the properties of a particle suspension. Here we use a fully immersed parallel plate geometry to measure the high-shear-rate behavior of a suspension of particles in a viscoelastic fluid. We find an unexpected separation of the particles within the suspension resulting in the formation of a layer of particles in the center of the cell. Remarkably, monodisperse particles form a crystalline layer which dramatically alters the shear instability. By combining measurements of the velocity field and torque fluctuations, we show that this solid layer disrupts the flow instability and introduces a new, single-frequency component to the torque fluctuations that reflects a dominant velocity pattern in the flow. These results highlight the interplay between particles and a suspending viscoelastic fluid at very high shear rates. △ Less

Submitted 26 June, 2023; v1 submitted 16 March, 2023; originally announced March 2023.

Comments: SI Videos and future data sharing are available at https://doi.org/10.7910/DVN/K0XZ6N

Evanescent Gels: Competition Between Sticker Dynamics and Single Chain Relaxation

Authors: Dominic Robe, Aritra Santra, Gareth H. McKinley, J. Ravi Prakash

Abstract: Solutions of polymer chains are modelled using non-equilibrium Brownian dynamics simulations, with physically associative beads which form reversible crosslinks to establish a system-spanning physical gel network. Rheological properties such as the zero-shear-rate viscosity and relaxation modulus are investigated systematically as functions of polymer concentration and the binding energy between a… ▽ More Solutions of polymer chains are modelled using non-equilibrium Brownian dynamics simulations, with physically associative beads which form reversible crosslinks to establish a system-spanning physical gel network. Rheological properties such as the zero-shear-rate viscosity and relaxation modulus are investigated systematically as functions of polymer concentration and the binding energy between associative sites. It is shown that a system-spanning network can form regardless of binding energy at sufficiently high concentration. However, the contribution to the stress sustained by this physical network can decay faster than other relaxation processes, even single chain relaxations. If the polymer relaxation time scales overlap with short-lived associations, the mechanical response of a gel becomes ``evanescent'', decaying before it can be rheologically observed, even though the network is instantaneously mechanically rigid. In our simulations, the concentration of elastically active chains and the dynamic modulii are computed independently. This makes it possible to combine structural and rheological information to identify the concentration at which the sol-gel transition occurs as a function of binding energy. Further, it is shown that the competition of scales between the sticker dissociation time and the single-polymer relaxation time determines if the gel is in the evanescent regime. △ Less

Submitted 10 February, 2024; v1 submitted 27 February, 2023; originally announced February 2023.

Comments: 25 pages, 13 figures, includes supplementary information, to appear in Macromolecules

Journal ref: Macromolecules, 57, 9, 4220-4235, 2024

Extensional rheometry of mobile fluids. Part II: Comparison between the uniaxial, planar and biaxial extensional rheology of dilute polymer solutions using numerically-optimized stagnation point microfluidic devices

Authors: Simon J. Haward, Stylianos Varchanis, Gareth H. McKinley, Manuel A. Alves, Amy Q. Shen

Abstract: In Part I of this paper [Haward et al. submitted (2023)], we presented a new three-dimensional microfluidic device (the optimized uniaxial and biaxial extensional rheometer, OUBER) for generating near-homogeneous uniaxial and biaxial elongational flows. In this Part II of the paper, we employ the OUBER device to examine the uniaxial and biaxial extensional rheology of some model dilute polymer sol… ▽ More In Part I of this paper [Haward et al. submitted (2023)], we presented a new three-dimensional microfluidic device (the optimized uniaxial and biaxial extensional rheometer, OUBER) for generating near-homogeneous uniaxial and biaxial elongational flows. In this Part II of the paper, we employ the OUBER device to examine the uniaxial and biaxial extensional rheology of some model dilute polymer solutions. We also compare the results with measurements made under planar extension in the optimized-shape cross-slot extensional rheometer [or OSCER, Haward et al. Phys. Rev. Lett. (2012)]. In each case (uniaxial, planar and biaxial extension), we use micro-particle image velocimetry to measure the extension rate as a function of the imposed flow rate, and we measure the excess pressure drop across each device in order to estimate the tensile stress difference generated in the fluid. We present a new analysis, based on solving the macroscopic power balance for flow through each device, to refine the estimate of the tensile stress difference obtained from the measured pressure drop. Based on this analysis, we find that for our most dilute polymer sample, which is "ultradilute", the extensional viscosity is well described by the finitely extensible non-linear elastic dumbbell model. In this limit, the biaxial extensional viscosity at high Weissenberg numbers (Wi) is half that of the uniaxial and planar extensional viscosities. At higher polymer concentrations, the experimental measurements deviate from the model predictions, which is attributed to the onset of intermolecular interactions as polymers unravel in the extensional flows. Of practical significance (and fundamental interest), elastic instability occurs at a significantly lower Wi in uniaxial extensional flow than in either biaxial or planar extensional flow, limiting the utility of this flow type for extensional viscosity measurement. △ Less

Submitted 23 February, 2023; originally announced February 2023.

Non-Maxwellian viscoelastic stress relaxations in soft matter

Authors: Jake Song, Niels Holten-Andersen, Gareth H. McKinley

Abstract: Viscoelastic stress relaxation is a basic characteristic of soft matter systems such as colloids, gels, and biological networks. Although the Maxwell model of linear viscoelasticity provides a classical description of stress relaxation, the Maxwell model is often not sufficient for capturing the complex relaxation dynamics of soft matter. In this Tutorial, we introduce and dis-cuss the physics of… ▽ More Viscoelastic stress relaxation is a basic characteristic of soft matter systems such as colloids, gels, and biological networks. Although the Maxwell model of linear viscoelasticity provides a classical description of stress relaxation, the Maxwell model is often not sufficient for capturing the complex relaxation dynamics of soft matter. In this Tutorial, we introduce and dis-cuss the physics of non-Maxwellian linear stress relaxation as observed in soft materials, the ascribed origins of this effect in different systems, and appropriate models that can be used to capture this relaxation behavior. We provide a basic toolkit that can assist the understanding and modeling of the mechanical relaxation of soft materials for diverse applications. △ Less

Submitted 24 April, 2023; v1 submitted 11 November, 2022; originally announced November 2022.

The hidden hierarchical nature of soft particulate gels

Authors: Minaspi Bantawa, Bavand Keshavarz, Michela Geri, Mehdi Bouzid, Thibaut Divoux, Gareth H. McKinley, Emanuela Del Gado

Abstract: Soft particulate gels include materials we can eat, squeeze, or 3D print. From foods to bio-inks to cement hydrates, these gels are composed of a small amount of particulate matter (proteins, polymers, colloidal particles, or agglomerates of various origins) embedded in a continuous fluid phase. The solid components assemble to form a porous matrix, providing rigidity and control of the mechanical… ▽ More Soft particulate gels include materials we can eat, squeeze, or 3D print. From foods to bio-inks to cement hydrates, these gels are composed of a small amount of particulate matter (proteins, polymers, colloidal particles, or agglomerates of various origins) embedded in a continuous fluid phase. The solid components assemble to form a porous matrix, providing rigidity and control of the mechanical response, despite being the minority constituent. The rheological response and gel elasticity are direct functions of the particle volume fraction $φ$: however, the diverse range of different functional dependencies reported experimentally has, to date, challenged efforts to identify general scaling laws. Here we reveal a hidden hierarchical organization of fractal elements that controls the viscoelastic spectrum, and which is associated with the spatial heterogeneity of the solid matrix topology. The fractal elements form the foundations of a viscoelastic master curve, which we construct using large-scale 3D microscopic simulations of model gels, and can be described by a recursive rheological ladder model over a range of particle volume fractions and gelation rates. The hierarchy of the fractal elements provides the missing general framework required to predict the gel elasticity and the viscoelastic response of these ubiquitous complex materials. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Scientific Machine Learning for Modeling and Simulating Complex Fluids

Authors: Kyle R. Lennon, Gareth H. McKinley, James W. Swan

Abstract: The formulation of rheological constitutive equations -- models that relate internal stresses and deformations in complex fluids -- is a critical step in the engineering of systems involving soft materials. While data-driven models provide accessible alternatives to expensive first-principles models and less accurate empirical models in many engineering disciplines, the development of similar mode… ▽ More The formulation of rheological constitutive equations -- models that relate internal stresses and deformations in complex fluids -- is a critical step in the engineering of systems involving soft materials. While data-driven models provide accessible alternatives to expensive first-principles models and less accurate empirical models in many engineering disciplines, the development of similar models for complex fluids has lagged. The diversity of techniques for characterizing non-Newtonian fluid dynamics creates a challenge for classical machine learning approaches, which require uniformly structured training data. Consequently, early machine learning constitutive equations have not been portable between different deformation protocols or mechanical observables. Here, we present a data-driven framework that resolves such issues, allowing rheologists to construct learnable models that incorporate essential physical information, while remaining agnostic to details regarding particular experimental protocols or flow kinematics. These scientific machine learning models incorporate a universal approximator within a materially objective tensorial constitutive framework. By construction, these models respect physical constraints, such as frame-invariance and tensor symmetry, required by continuum mechanics. We demonstrate that this framework facilitates the rapid discovery of accurate constitutive equations from limited data, and that the learned models may be used to describe more kinematically complex flows. This inherent flexibility admits the application of these 'digital fluid twins' to a range of material systems and engineering problems. We illustrate this flexibility by deploying a trained model within a multidimensional computational fluid dynamics simulation -- a task that is not achievable using any previously developed data-driven rheological equation of state. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Comments: 13 pages, 4 figures

Dual origin of viscoelasticity in polymer-carbon black hydrogels: a rheometry and electrical spectroscopy study

Authors: Gauthier Legrand, Sébastien Manneville, Gareth H. McKinley, Thibaut Divoux

Abstract: Nanocomposites formed by mixing nanoparticles and polymers offer a limitless creative space for the design of functional advanced materials with a broad range of applications in materials and biological sciences. Here we focus on aqueous dispersions of hydrophobic colloidal soot particles, namely carbon black (CB) dispersed with a sodium salt of carboxymethylcellulose (CMC), a food additive known… ▽ More Nanocomposites formed by mixing nanoparticles and polymers offer a limitless creative space for the design of functional advanced materials with a broad range of applications in materials and biological sciences. Here we focus on aqueous dispersions of hydrophobic colloidal soot particles, namely carbon black (CB) dispersed with a sodium salt of carboxymethylcellulose (CMC), a food additive known as cellulose gum that bears hydrophobic groups, which are liable to bind physically to CB particles. Varying the relative content of CB nanoparticles and cellulose gum allows us to explore a rich phase diagram that includes a gel phase. We investigate this hydrogel using rheometry and electrochemical impedance spectroscopy. CB-CMC hydrogels display two radically different types of mechanical behaviors that are separated by a critical CMC-to-CB mass ratio $r_c$. For $r<r_c$, i.e., for low CMC concentration, the gel is electrically conductive and shows a glassy-like viscoelastic spectrum, pointing to a microstructure composed of a percolated network of CB nanoparticles decorated by CMC. In contrast, gels with CMC concentration larger than $r_c$ are non-conductive, indicating that the CB nanoparticles are dispersed in the cellulose gum matrix as isolated clusters, and act as physical crosslinkers of the CMC network, hence providing mechanical rigidity to the composite. Moreover, in the concentration range, $r>r_c$ CB-CMC gels display a power-law viscoelastic spectrum that depends strongly on the CMC concentration. These relaxation spectra can be rescaled onto a master curve that exhibits a power-law scaling in the high-frequency limit, with an exponent that follows Zimm theory, showing that CMC plays a key role in the gel viscoelastic properties for $r>r_c$. Our results offer a characterization of CB-CMC dispersions that will be useful for designing nanocomposites based on hydrophobic interactions. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Comments: 18 pages, 10 figures, and 6 supplemental figures

Capillarity-driven thinning dynamics of entangled polymer solutions

Authors: Jianyi Du, Hiroko Ohtani, Alper Kiziltas, Kevin Ellwood, Gareth H. McKinley

Abstract: We analyze the capillarity-driven thinning dynamics of entangled polymer solutions described by the Doi-Edwards-Marrucci-Grizzuti (DEMG) model and the Rolie-Poly (RP) model. Both models capture polymer reptation, finite rates of chain retraction and finite extensibility of single polymer molecules, while differing slightly in their final form regarding to the convective constraint release. We calc… ▽ More We analyze the capillarity-driven thinning dynamics of entangled polymer solutions described by the Doi-Edwards-Marrucci-Grizzuti (DEMG) model and the Rolie-Poly (RP) model. Both models capture polymer reptation, finite rates of chain retraction and finite extensibility of single polymer molecules, while differing slightly in their final form regarding to the convective constraint release. We calculate numerically the filament thinning profiles predicted by the two models with realistic entanglement densities, assuming cylindrical filament shapes and no fluid inertia. Both results reveal an early tube-reorientation regime, followed by a brief intermediate elasto-capillary regime, and finally a finite-extensibility regime close to the pinch-off singularity. The results presented in this work reveal two critical features in the transient extensional rheology of entangled polymer solutions that have been reported from previous experimental studies, but are poorly described by the widely-used FENE-P model. First, the relaxation time obtained from capillary breakup extensional rheometry is notably smaller than that from steady-shear rheometry. Their ratio can be expressed as a universal function of the entanglement state and the polymer concentration, which agrees well with the experimental data for a range of entangled polymer solutions. Second, the filament thinning dynamics at sufficiently high polymer concentrations are governed by the tube reorientation at intermediate strain-rates, and the apparent extensional viscosity shows a noticeably rate-thinning response. We finally evaluate the filament thinning dynamics of aqueous polyethylene oxide solutions (1 MDa) over dilute and entangled regimes. As the concentration increases, the profiles deviate from the well-studied exponential-thinning trends beyond the entangled threshold, becoming increasingly power-law in character. △ Less

Submitted 13 June, 2022; originally announced June 2022.

Comments: 44 pages, 11 figures, to be published

Capillarity-driven thinning and breakup of weakly rate-thickening fluids

Authors: Jianyi Du, Hiroko Ohtani, Kevin Ellwood, Gareth H. McKinley

Abstract: A number of commercial fluids, including synthetic automotive oils, food and consumer products containing polymer additives exhibit weakly rate-thickening responses in the final stages of capillarity-driven thinning, where a large accumulated strain and high extensional strain rate alter the thinning dynamics of the slender liquid filament. Consequently, the capillarity-driven thinning dynamics ty… ▽ More A number of commercial fluids, including synthetic automotive oils, food and consumer products containing polymer additives exhibit weakly rate-thickening responses in the final stages of capillarity-driven thinning, where a large accumulated strain and high extensional strain rate alter the thinning dynamics of the slender liquid filament. Consequently, the capillarity-driven thinning dynamics typically feature two distinct regions at the early and late stages of the filament breakup process, each dominated by distinct mechanisms. These features have been incorporated in a simple Inelastic Rate-Thickening (IRT) model with linear and quadratic contributions to the constitutive stress-strain rate relationship, where the apparent extensional viscosity slowly thickens at high strain rates. We numerically compute the thinning dynamics of the IRT model assuming an axially-slender axisymmetric filament and no fluid inertia. The computational results motivate a new self-similar solution dominated by the second-order stress obtained through a similarity transformation. The new asymptotic solution leads to a self-similar filament shape that is more slender than the Newtonian counterpart and results in a quadratic thinning of the mid-point radius of the filament with time to breakup close to singularity. A new and distinct asymptotic geometric correction factor, $X\approx 0.5778$ is obtained, from which a more accurate true extensional viscosity can be recovered from an interpolated time-varying geometric correction factor based on the magnitudes of different stress components. Finally, we propose a statistics-based protocol to select the best-fit constitutive model using a parameter-free criterion, enabling us to quantify the extensional rheological behavior through capillarity-driven thinning dynamics more systematically on complex rate-thickening viscoelastic fluids. △ Less

Submitted 13 June, 2022; originally announced June 2022.

Comments: 17 pages, 9 figures, to be published

A Data-Driven Method for Automated Data Superposition with Applications in Soft Matter Science

Authors: Kyle R. Lennon, Gareth H. McKinley, James W. Swan

Abstract: The superposition of data sets with internal parametric self-similarity is a longstanding and widespread technique for the analysis of many types of experimental data across the physical sciences. Typically, this superposition is performed manually, or recently by one of a few automated algorithms. However, these methods are often heuristic in nature, are prone to user bias via manual data shiftin… ▽ More The superposition of data sets with internal parametric self-similarity is a longstanding and widespread technique for the analysis of many types of experimental data across the physical sciences. Typically, this superposition is performed manually, or recently by one of a few automated algorithms. However, these methods are often heuristic in nature, are prone to user bias via manual data shifting or parameterization, and lack a native framework for handling uncertainty in both the data and the resulting model of the superposed data. In this work, we develop a data-driven, non-parametric method for superposing experimental data with arbitrary coordinate transformations, which employs Gaussian process regression to learn statistical models that describe the data, and then uses maximum a posteriori estimation to optimally superpose the data sets. This statistical framework is robust to experimental noise, and automatically produces uncertainty estimates for the learned coordinate transformations. Moreover, it is distinguished from black-box machine learning in its interpretability -- specifically, it produces a model that may itself be interrogated to gain insight into the system under study. We demonstrate these salient features of our method through its application to four representative data sets characterizing the mechanics of soft materials. In every case, our method replicates results obtained using other approaches, but with reduced bias and the addition of uncertainty estimates. This method enables a standardized, statistical treatment of self-similar data across many fields, producing interpretable data-driven models that may inform applications such as materials classification, design, and discovery. △ Less

Submitted 31 May, 2022; v1 submitted 20 April, 2022; originally announced April 2022.

Comments: 19 pages, 7 figures

Computational Rheometry of Yielding and Viscoplastic Flow in Vane-and-Cup Rheometer Fixtures

Authors: Emad Chaparian, Crystal E. Owens, Gareth H. McKinley

Abstract: A planar two-dimensional computational analysis is presented to qualify traditional and fractal vane-in-cup geometries for accurate rheometry of simple viscoplastic fluids with and without slip. Numerical simulations based on an adaptive augmented Lagrangian scheme are used to study the two-dimensional flow field of yield-stress fluids within and around vane tools with N=3 to 24 arms for a wide ra… ▽ More A planar two-dimensional computational analysis is presented to qualify traditional and fractal vane-in-cup geometries for accurate rheometry of simple viscoplastic fluids with and without slip. Numerical simulations based on an adaptive augmented Lagrangian scheme are used to study the two-dimensional flow field of yield-stress fluids within and around vane tools with N=3 to 24 arms for a wide range of Bingham numbers, B (i.e. the ratio of the yield stress over the characteristic viscous stress). This allows for accurate calculations of the velocity and stress fields around vanes with various geometries, as well as direct comparison to experimental observations of the output torque measured by a rheometer, revealing sources of variation and error. We describe the impact of the vane structure on the fluid velocity field, from few-arm cruciform vanes (N < 6) that significantly perturb the flow away from ideal azimuthal kinematics, to many-arm fractal vanes (N > 12) in which the internal structural features are successfully ``cloaked" by a yield surface. This results in the shearing of an almost-circular ring of viscoplastic fluid that is indistinguishable from the annular ring of fluid deformed around a slip-free rotating cylindrical bob and leads to more accurate rheometric measurements of the material flow curve. Moreover, in direct comparison with data from previous literature, we show that slip conditions on the vane surface do not impact the velocity field or measured overall torque T, whereas slip conditions on the smooth outer wall have significant impact on data, even when using a vane geometry. Finally, we describe the impact of vane topography and Bingham number, B, on the measured torque and rheometric accuracy of vane-in-cup geometries for ``simple" (inelastic) yield-stress fluids described by either the Bingham plastic or Herschel-Bulkley constitutive model. △ Less

Submitted 12 July, 2022; v1 submitted 8 February, 2022; originally announced February 2022.

The Mnemosyne Number and the Rheology of Remembrance

Authors: Safa Jamali, Gareth H. McKinley

Abstract: The concept of a Deborah number is widely used in study of viscoelastic materials and to represent the ratio of a material relaxation time to the timescale of observation, and to demarcate transitions between predominantly viscous or elastic material responses. However, this construct does not help quantify the importance of long transients and non-monotonic stress jumps that are often observed in… ▽ More The concept of a Deborah number is widely used in study of viscoelastic materials and to represent the ratio of a material relaxation time to the timescale of observation, and to demarcate transitions between predominantly viscous or elastic material responses. However, this construct does not help quantify the importance of long transients and non-monotonic stress jumps that are often observed in more complex time-varying systems. Many of these non-intuitive effects are lumped collectively under the term thixotropy; however, no proper nouns are associated with the key phenomena observed in such materials. Thixotropy arises from the ability of a complex structured fluid to remember its prior deformation history, so it is natural to name the dimensionless group representing such behavior with respect to the ability to remember. In Greek mythology, Mnemosyne was mother of the nine Muses and the goddess of memory. We thus propose the definition of a Mnemosyne number as the dimensionless product of the thixotropic time scale and the imposed rate of deformation. The Mnemosyne number is thus a measure of the flow strength compared to the thixotropic timescale. Since long transients responses are endemic to thixotropic materials, one also needs to consider the duration of flow. The relevant dimensionless measure of this duration can be represented in terms of a mutation number which compares the timescale of experiment/observation to the thixotropic timescale. Collating the mutation number and the Mnemosyne number, we construct a general two-dimensional map of thixotropic behavior, and quantify these ideas using canonical thixotropic models. △ Less

Submitted 4 January, 2022; originally announced January 2022.

Valence can control the nonexponential viscoelastic relaxation of multivalent reversible gels

Authors: Hugo Le Roy, Jake Song, David Lundberg, leksandr V. Zhukhovitskiy, Jeremiah A. Johnson, Gareth H. McKinley, Niels Holten-Andersen, Martin Lenz

Abstract: Gels made of telechelic polymers connected by reversible crosslinkers are a versatile design platform for biocompatible viscoelastic materials. Their linear response to a step strain displays a fast, near-exponential relaxation when using low valence crosslinkers, while larger supramolecular crosslinkers bring about much slower dynamics involving a wide distribution of time scales whose physical o… ▽ More Gels made of telechelic polymers connected by reversible crosslinkers are a versatile design platform for biocompatible viscoelastic materials. Their linear response to a step strain displays a fast, near-exponential relaxation when using low valence crosslinkers, while larger supramolecular crosslinkers bring about much slower dynamics involving a wide distribution of time scales whose physical origin is still debated. Here, we propose a model where the relaxation of polymer gels in the dilute regime originates from elementary events in which the bonds connecting two neighboring crosslinkers all disconnect. Larger crosslinkers allow for a greater average number of bonds connecting them, but also generate more heterogeneity. We characterize the resulting distribution of relaxation time scales analytically, and accurately reproduce stress relaxation measurements on metal-coordinated hydrogels with a variety of crosslinker sizes including ions, metal-organic cages, and nanoparticles. Our approach is simple enough to be extended to any crosslinker size and could thus be harnessed for the rational design of complex viscoelastic materials. △ Less

Submitted 10 October, 2023; v1 submitted 14 December, 2021; originally announced December 2021.

Comments: 6 pages 5 figures 1 table for the main text and 9 pages 7 figures for the supplement

Interplay between wall slip and shear banding in a thixotropic yield stress fluid

Authors: Michela Geri, Brice Saint-Michel, Thibaut Divoux, Gareth H. McKinley, Sebastien Manneville

Abstract: We study the local dynamics of a thixotropic yield stress fluid that shows a pronounced non-monotonic flow curve. This mechanically unstable behavior is generally not observable from standard rheometry tests, resulting in a stress plateau that stems from the coexistence of a flowing band with an unyielded region below a critical shear rate $\dot γ_c$. Combining ultrasound velocimetry with standard… ▽ More We study the local dynamics of a thixotropic yield stress fluid that shows a pronounced non-monotonic flow curve. This mechanically unstable behavior is generally not observable from standard rheometry tests, resulting in a stress plateau that stems from the coexistence of a flowing band with an unyielded region below a critical shear rate $\dot γ_c$. Combining ultrasound velocimetry with standard rheometry, we discover an original shear-banding scenario in the decreasing branch of the flow curve of model paraffin gels, in which the flow profile of the flowing band is set by the applied shear rate $\gd$ instead of $\dot γ_c$. As a consequence, the material slips at the walls with a velocity that shows a non-trivial dependence on the applied shear rate. To capture our observations, we propose a differential version of the so-called lever rule, describing the extent of the flowing band and the evolution of wall slip with shear rate. This phenomenological model holds down to very low shear rates, at which the dimension of the flowing band becomes comparable to the size of the wax particles that constitute the gel microstructure, leading to cooperative effects. Our approach provides a framework where constraints imposed in the classical shear-banding scenario can be relaxed, with wall slip acting as an additional degree of freedom. △ Less

Submitted 19 February, 2024; v1 submitted 16 November, 2021; originally announced November 2021.

Comments: 12 pages, 9 figures

Perspectives on viscoelastic flow instabilities and elastic turbulence

Authors: Sujit S. Datta, Arezoo M. Ardekani, Paulo E. Arratia, Antony N. Beris, Irmgard Bischofberger, Jens G. Eggers, J. Esteban López-Aguilar, Suzanne M. Fielding, Anna Frishman, Michael D. Graham, Jeffrey S. Guasto, Simon J. Haward, Sarah Hormozi, Gareth H. McKinley, Robert J. Poole, Alexander Morozov, V. Shankar, Eric S. G. Shaqfeh, Amy Q. Shen, Holger Stark, Victor Steinberg, Ganesh Subramanian, Howard A. Stone

Abstract: Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the h… ▽ More Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the hallmarks of turbulence -- even though the effective Reynolds numbers may be $O(1)$ or smaller. We provide perspectives on viscoelastic flow instabilities by integrating the input from speakers at a recent international workshop: historical remarks, characterization of fluids and flows, discussion of experimental and simulation tools, and modern questions and puzzles that motivate further studies of this fascinating subject. The materials here will be useful for researchers and educators alike, especially as the subject continues to evolve in both fundamental understanding and applications in engineering and the sciences. △ Less

Submitted 22 August, 2021; originally announced August 2021.

Comments: A perspective article based on a virtual workshop of the Princeton Center for Theoretical Sciences that took place in January 2021

Substrate-Versatile Direct-Write Printing of Carbon Nanotube-Based Flexible Conductors, Circuits, and Sensors

Authors: Crystal E. Owens, Robert J. Headrick, Steven M. Williams, Amanda J. Fike, Matteo Pasquali, Gareth H. McKinley, A. John Hart

Abstract: Printed electronics rely on the deposition of conductive liquid inks, typically onto polymeric or paper substrates. Among available conductive fillers for use in electronic inks, carbon nanotubes (CNTs) have high conductivity, low density, processability at low temperatures, and intrinsic mechanical flexibility. However, the electrical conductivity of printed CNT structures has been limited by CNT… ▽ More Printed electronics rely on the deposition of conductive liquid inks, typically onto polymeric or paper substrates. Among available conductive fillers for use in electronic inks, carbon nanotubes (CNTs) have high conductivity, low density, processability at low temperatures, and intrinsic mechanical flexibility. However, the electrical conductivity of printed CNT structures has been limited by CNT quality and concentration, and by the need for nonconductive modifiers to make the ink stable and extrudable. This study introduces a polymer-free, printable aqueous CNT ink, and presents the relationships between printing resolution, ink rheology, and ink-substrate interactions. A model is constructed to predict printed feature sizes on impermeable substrates based on Wenzel wetting. Printed lines have conductivity up to 10,000 S/m. The lines are flexible, with < 5% change in DC resistance after 1,000 bending cycles, and <3% change in DC resistance with a bending radius down to 1 mm. Demonstrations focus on (i) conformality, via printing CNTs onto stickers that can be applied to curved surfaces, (ii) interactivity using a CNT-based button printed onto folded paper structure, and (iii) capacitive sensing of liquid wicking into the substrate itself. Facile integration of surface mount components on printed circuits is enabled by the intrinsic adhesion of the wet ink. △ Less

Submitted 23 May, 2021; originally announced May 2021.

Comments: Published in Advanced Functional Materials

Journal ref: Advanced Functional Materials (2021)

Medium Amplitude Parallel Superposition (MAPS) Rheology of a Wormlike Micellar Solution

Authors: Kyle R. Lennon, Gareth H. McKinley, James W. Swan

Abstract: The weakly nonlinear rheology of a surfactant solution of wormlike micelles is investigated from both a modeling and experimental perspective using the framework of medium amplitude parallel superposition (MAPS) rheology. MAPS rheology defines material functions, such as the third order complex compliance, which span the entire weakly nonlinear response space of viscoelastic materials to simple sh… ▽ More The weakly nonlinear rheology of a surfactant solution of wormlike micelles is investigated from both a modeling and experimental perspective using the framework of medium amplitude parallel superposition (MAPS) rheology. MAPS rheology defines material functions, such as the third order complex compliance, which span the entire weakly nonlinear response space of viscoelastic materials to simple shear deformations. Three-tone oscillatory shear deformations are applied to obtain feature-rich data characterizing the third order complex compliance with high data throughput. Here, data for a CPyCl solution are compared to the analytical solution for the MAPS response of a reptation-reaction constitutive model, which treats micelles as linear polymers that can break apart and recombine in solution. Regression of the data to the model predictions provides new insight into how these breakage and recombination processes are affected by shear, and demonstrates the importance of using information-rich data to infer precise estimates of model parameters. △ Less

Submitted 22 April, 2021; originally announced April 2021.

Comments: 11 pages, 6 figures

The Medium Amplitude Response of Nonlinear Maxwell-Oldroyd Type Models in Simple Shear

Authors: Kyle R. Lennon, Gareth H. McKinley, James W. Swan

Abstract: A general framework for Maxwell-Oldroyd type differential constitutive models is examined, in which an unspecified nonlinear function of the stress and rate-of-deformation tensors is incorporated into the well-known corotational version of the Jeffreys model discussed by Oldroyd. For medium amplitude simple shear deformations, the recently developed mathematical framework of medium amplitude paral… ▽ More A general framework for Maxwell-Oldroyd type differential constitutive models is examined, in which an unspecified nonlinear function of the stress and rate-of-deformation tensors is incorporated into the well-known corotational version of the Jeffreys model discussed by Oldroyd. For medium amplitude simple shear deformations, the recently developed mathematical framework of medium amplitude parallel superposition (MAPS) rheology reveals that this generalized nonlinear Maxwell model can produce only a limited number of distinct signatures, which combine linearly in a well-posed basis expansion for the third order complex viscosity. This basis expansion represents a library of MAPS signatures for distinct constitutive models that are contained within the generalized nonlinear Maxwell model. We describe a framework for quantitative model identification using this basis expansion, and discuss its limitations in distinguishing distinct nonlinear features of the underlying constitutive models from medium amplitude shear stress data. The leading order contributions to the normal stress differences are also considered, revealing that only the second normal stress difference provides distinct information about the weakly nonlinear response space of the model. After briefly considering the conditions for time-strain separability within the generalized nonlinear Maxwell model, we apply the basis expansion of the third order complex viscosity to derive the medium amplitude signatures of the model in specific shear deformation protocols. Finally, we use these signatures for estimation of model parameters from rheological data obtained by these different deformation protocols, revealing that three-tone oscillatory shear deformations produce data that is readily able to distinguish all features of the medium amplitude, simple shear response space of this generalized class of constitutive models. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Comments: 26 pages, 11 figures

Medium Amplitude Parallel Superposition (MAPS) Rheology, Part 2: Experimental Protocols and Data Analysis

Authors: Kyle R. Lennon, Michela Geri, Gareth H. McKinley, James W. Swan

Abstract: An experimental protocol is developed to directly measure the new material functions revealed by medium amplitude parallel superposition (MAPS) rheology. This experimental protocol measures the medium amplitude response of a material to a simple shear deformation composed of three sine waves at different frequencies. Imposing this deformation and measuring the mechanical response reveals a rich da… ▽ More An experimental protocol is developed to directly measure the new material functions revealed by medium amplitude parallel superposition (MAPS) rheology. This experimental protocol measures the medium amplitude response of a material to a simple shear deformation composed of three sine waves at different frequencies. Imposing this deformation and measuring the mechanical response reveals a rich data set consisting of up to 19 measurements of the third order complex modulus at distinct three-frequency coordinates. We discuss how the choice of the input frequencies influences the features of the MAPS domain studied by the experiment. A polynomial interpolation method for reducing the bias of measured values from spectral leakage and variance due to noise is discussed, including a derivation of the optimal range of amplitudes for the input signal. This leads to the conclusion that conducting the experiment in a stress-controlled fashion possesses a distinct advantage to the strain-controlled mode. The experimental protocol is demonstrated through measurements of the MAPS response of a model complex fluid: a surfactant solution of wormlike micelles. The resulting data set is indeed large and feature-rich, while still being acquired in a time comparable to similar medium amplitude oscillatory shear (MAOS) experiments. We demonstrate that the data represents measurements of an intrinsic material function by studying its internal consistency, its compatibility with low-frequency predictions for Coleman-Noll simple fluids, and its agreement with data obtained via MAOS amplitude sweeps. Finally, the data is compared to predictions from the corotational Maxwell model to demonstrate the power of MAPS rheology in determining whether a constitutive model is consistent with a material's time-dependent response. △ Less

Submitted 16 June, 2020; originally announced June 2020.

Comments: 31 pages, 18 figures

Tuning the shear-thickening of suspensions through surface roughness and physico-chemical interactions

Authors: Philippe Bourrianne, Vincent Niggel, Gatien Polly, Thibaut Divoux, Gareth H. McKinley

Abstract: Shear thickening denotes the reversible increase in viscosity of a suspension of rigid particles under external shear. This ubiquitous phenomenon has been documented in a broad variety of multiphase particulate systems, while its microscopic origin has been successively attributed to hydrodynamic interactions and frictional contact between particles. The relative contribution of these two phenomen… ▽ More Shear thickening denotes the reversible increase in viscosity of a suspension of rigid particles under external shear. This ubiquitous phenomenon has been documented in a broad variety of multiphase particulate systems, while its microscopic origin has been successively attributed to hydrodynamic interactions and frictional contact between particles. The relative contribution of these two phenomena to the magnitude of shear thickening is still highly debated and we report here a discriminating experimental study using a model shear-thickening suspension that allows us to tune independently both the surface chemistry and the surface roughness of the particles. We show here that both properties matter when it comes to continuous shear thickening (CST) and that the presence of hydrogen bonds between the particles is essential to achieve discontinuous shear thickening (DST) by enhancing solid friction between closely contacting particles. Moreover, a simple argument allows us to predict the onset of CST, which for these very rough particles occurs at a critical volume fraction much lower than that previously reported in the literature. Finally, we demonstrate how mixtures of particles with opposing surface chemistry make it possible to finely tune the shear-thickening response of the suspension at a fixed volume fraction, paving the way for a fine control of the shear-thickening transition in engineering applications. △ Less

Submitted 16 June, 2022; v1 submitted 7 January, 2020; originally announced January 2020.

Comments: 16 pages, 16 figures

Time-Rate-Transformation framework for targeted assembly of short-range attractive colloidal suspensions

Authors: Safa Jamali, Robert C. Armstrong, Gareth H. McKinley

Abstract: The aggregation of attractive colloids has been extensively studied from both theoretical and experimental perspectives as the fraction of solid particles is changed, and the range, type and strength of attractive or repulsive forces between particles varies. The resulting gels consisting of disordered assemblies of attractive colloidal particles, have also been investigated with regards to percol… ▽ More The aggregation of attractive colloids has been extensively studied from both theoretical and experimental perspectives as the fraction of solid particles is changed, and the range, type and strength of attractive or repulsive forces between particles varies. The resulting gels consisting of disordered assemblies of attractive colloidal particles, have also been investigated with regards to percolation, phase separation, and the mechanical characteristics of the resulting fractal networks. Despite tremendous progress in our understanding of the gelation process, and the exploration of different routes for arresting the dynamics of attractive colloids, the complex interplay between convective transport processes and many-body effects in such systems has limited our ability to drive the system towards a specific configuration. Here we study a model attractive colloidal system over a wide range of particle characteristics and flow conditions undergoing aggregation far from equilibrium. The complex multiscale dynamics of the system can be understood using a Time-Rate-Transformation diagram adapted from understanding of materials processing in block copolymers, supercooled liquids and much stiffer glassy metals to direct targeted assembly of attractive colloidal particles. △ Less

Submitted 6 November, 2019; originally announced November 2019.

Improved Rheometry of Yield Stress Fluids Using Bespoke Fractal 3D Printed Vanes

Authors: Crystal E. Owens, A. John Hart, Gareth H. McKinley

Abstract: To enable robust rheological measurements of the properties of yield stress fluids, we introduce a class of modified vane fixtures with fractal-like cross-sectional structures. A greater number of outer contact edges leads to increased kinematic homogeneity at the point of yielding and beyond. The vanes are 3D printed using a desktop stereolithography machine, making them inexpensive (disposable),… ▽ More To enable robust rheological measurements of the properties of yield stress fluids, we introduce a class of modified vane fixtures with fractal-like cross-sectional structures. A greater number of outer contact edges leads to increased kinematic homogeneity at the point of yielding and beyond. The vanes are 3D printed using a desktop stereolithography machine, making them inexpensive (disposable), chemically-compatible with a wide range of solvents, and readily adaptable as a base for further design innovations. To complete the tooling set, we introduce a textured 3D printed cup, which attaches to a standard rheometer base. We discuss general design criteria for 3D printed rheometer vanes, including consideration of sample volume displaced by the vanes, stress homogeneity, and secondary flows that constrain the parameter space of potential designs. We also develop a conversion from machine torque to material shear stress for vanes with an arbitrary number of arms. We compare a family of vane designs by measuring the viscosity of Newtonian calibration oils with error <5% relative to reference measurements made with a cone-and-plate geometry. We measure the flow curve of a simple Carbopol yield stress fluid, and show that a 24-arm 3D printed fractal vane agrees within 1% of reference measurements made with a roughened cone-and-plate geometry. Last, we demonstrate use of the 24-arm fractal vane to probe the thixo-elasto-visco-plastic (TEVP) response of a Carbopol-based hair gel, a jammed emulsion (mayonnaise), and a strongly alkaline carbon black-based battery slurry. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Medium Amplitude Parallel Superposition (MAPS) Rheology, Part 1: Mathematical Framework and Theoretical Examples

Authors: Kyle R. Lennon, Gareth H. McKinley, James W. Swan

Abstract: A new mathematical representation for nonlinear viscoelasticity is presented based on application of the Volterra series expansion to the general nonlinear relationship between shear stress and shear strain history. This theoretical and experimental framework, which we call Medium Amplitude Parallel Superposition (MAPS) Rheology, reveals a new material property, the third order complex modulus, wh… ▽ More A new mathematical representation for nonlinear viscoelasticity is presented based on application of the Volterra series expansion to the general nonlinear relationship between shear stress and shear strain history. This theoretical and experimental framework, which we call Medium Amplitude Parallel Superposition (MAPS) Rheology, reveals a new material property, the third order complex modulus, which describes completely the weakly nonlinear response of a viscoelastic material in an arbitrary simple shear flow. In this first part, we discuss several theoretical aspects of this mathematical formulation and new material property. For example, we show how MAPS measurements can be performed in strain- or stress-controlled contexts and provide relationships between the weakly nonlinear response functions measured in each case. We show that the MAPS response function is a super-set of the response functions that have been previously reported in medium amplitude oscillatory shear and parallel superposition rheology experiments. We also show how to exploit inherent symmetries of the MAPS response function to reduce it to a minimal domain for straightforward measurement and visualization. We compute this material property for a few constitutive models to illustrate the potential richness of the data sets generated by MAPS experiments. Finally, we discuss the MAPS framework in the context of some other nonlinear, time-dependent rheological probes and explain how the MAPS methodology has a distinct advantage over these others because it generates data embedded in a very high dimensional space without driving fluid mechanical instabilities, and is agnostic to the flow protocol. △ Less

Submitted 10 February, 2022; v1 submitted 17 October, 2019; originally announced October 2019.

Comments: 29 pages, 10 figures

Shear Melting and Recovery of Crosslinkable Cellulose Nanocrystal-Polymer Gels

Authors: Abhinav Rao, Thibaut Divoux, Gareth H. McKinley, A. John Hart

Abstract: Cellulose nanocrystals (CNC) are naturally-derived nanostructures of growing importance for the production of composites having attractive mechanical properties, and offer improved sustainability over purely petroleum-based alternatives. Fabrication of CNC composites typically involves extrusion of CNC suspensions and gels in a variety of solvents, in the presence of additives such as polymers and… ▽ More Cellulose nanocrystals (CNC) are naturally-derived nanostructures of growing importance for the production of composites having attractive mechanical properties, and offer improved sustainability over purely petroleum-based alternatives. Fabrication of CNC composites typically involves extrusion of CNC suspensions and gels in a variety of solvents, in the presence of additives such as polymers and curing agents. However, most studies so far have focused on aqueous CNC gels, yet the behavior of CNC-polymer gels in organic solvents is important to their wider processability. Here, we study the rheological behavior of composite polymer-CNC gels in dimethylformamide, which include additives for both UV and thermal crosslinking. Using rheometry coupled with in-situ infrared spectroscopy, we show that under external shear, CNC-polymer gels display progressive and irreversible failure of the hydrogen bond network that is responsible for their pronounced elastic properties. In the absence of cross-linking additives, the polymer-CNC gels show negligible recovery upon cessation of flow, while the presence of additives allows the gels to recover via van der Waals interactions. By exploring a broad range of shear history and CNC concentrations, we construct master curves for the temporal evolution of the viscoelastic properties of the polymer-CNC gels, illustrating universality of the observed dynamics with respect to gel composition and flow conditions. We therefore find that polymer-CNC composite gels display a number of the distinctive features of colloidal glasses and, strikingly, that their response to the flow conditions encountered during processing can be tuned by chemical additives. These findings have implications for processing of dense CNC-polymer composites in solvent casting, 3D printing, and other manufacturing techniques. △ Less

Submitted 14 January, 2019; originally announced January 2019.

Comments: 12 pages, 10 figures, Supplemental: 6 pages, 8 figures

Anti-fatigue-fracture hydrogels

Authors: Shaoting Lin, Xinyue Liu, Ji Liu, Hyunwoo Yuk, Hyun-Chae Loh, German A. Parada, Charles Settens, Jake Song, Admir Masic, Gareth H. McKinley, Xuanhe Zhao

Abstract: The emerging applications of hydrogels in devices and machines require these soft materials to maintain robustness under cyclic mechanical loads. Whereas hydrogels have been made tough to resist fracture under a single cycle of mechanical load, these toughened gels still suffer from fatigue fracture under multiple cycles of loads. The reported fatigue threshold (i.e., the minimal fracture energy a… ▽ More The emerging applications of hydrogels in devices and machines require these soft materials to maintain robustness under cyclic mechanical loads. Whereas hydrogels have been made tough to resist fracture under a single cycle of mechanical load, these toughened gels still suffer from fatigue fracture under multiple cycles of loads. The reported fatigue threshold (i.e., the minimal fracture energy at which crack propagation occurs under cyclic loads) for synthetic hydrogels is on the order of 1-100 J/m2, which is primarily associated with the energy required to fracture a single layer of polymer chains per unit area. Here, we demonstrate that the controlled introduction of crystallinity in hydrogels can significantly enhance their fatigue thresholds, since the process of fracturing crystalline domains for fatigue-crack propagation requires much higher energy than fracturing a single layer of polymer chains. The fatigue threshold of polyvinyl alcohol (PVA) with a crystallinity of 18.9 wt.% in the swollen state can exceed 1,000 J/m2. We further develop a strategy to enhance the anti-fatigue-fracture properties of PVA hydrogels, but still maintain their high water contents and low moduli by patterning highly-crystalline regions in the hydrogels. The current work not only reveals an anti-fatigue-fracture mechanism in hydrogels but also provides a practical method to design anti-fatigue-fracture hydrogels for diverse applications. △ Less

Submitted 16 December, 2018; originally announced December 2018.

Comments: 38 pages, 14 figures

Computing the linear viscoelastic properties of soft gels using an Optimally Windowed Chirp protocol

Authors: Mehdi Bouzid, Bavand Keshavarz, Michela Geri, Thibaut Divoux, Emanuela Del Gado, Gareth H. McKinley

Abstract: We use molecular dynamics simulations of a model three-dimensional particulate gel, to investigate the linear viscoelastic response. The numerical simulations are combined with a novel test protocol (the optimally- windowed chirp or OWCh), in which a continuous exponentially-varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyze… ▽ More We use molecular dynamics simulations of a model three-dimensional particulate gel, to investigate the linear viscoelastic response. The numerical simulations are combined with a novel test protocol (the optimally- windowed chirp or OWCh), in which a continuous exponentially-varying frequency sweep windowed by a tapered cosine function is applied. The mechanical response of the gel is then analyzed in the Fourier domain. We show that i) OWCh leads to an accurate computation of the full frequency spectrum at a rate significantly faster than with the traditional discrete frequency sweeps, and with a reasonably high signal-to-noise ratio, and ii) the bulk viscoelastic response of the microscopic model can be described in terms of a simple mesoscopic constitutive model. The simulated gel response is in fact well described by a mechanical model corresponding to a fractional Kelvin-Voigt model with a single Scott-Blair (or springpot) element and a spring in parallel. By varying the viscous dam** and the particle mass used in the microscopic simulations over a wide range of values, we demonstrate the existence of a single master curve for the frequency dependence of the viscoelastic response of the gel that is fully predicted by the constitutive model. By develo** a fast and robust protocol for evaluating the linear viscoelastic spectrum of these soft solids, we open the path towards novel multiscale insight into the rheological response for such complex materials. △ Less

Submitted 21 May, 2018; originally announced May 2018.

Time-Resolved Mechanical Spectroscopy of Soft Materials via Optimally Windowed Chirps

Authors: Michela Geri, Bavand Keshavarz, Thibaut Divoux, Christian Clasen, Dan J. Curtis, Gareth H. McKinley

Abstract: The ability to measure the bulk dynamic behavior of soft materials with combined time- and frequency-resolution is instrumental for improving our fundamental understanding of connections between the microstructural dynamics and the macroscopic mechanical response. Current state-of-the-art techniques are often limited by a compromise between resolution in the time and frequency domain, mainly due t… ▽ More The ability to measure the bulk dynamic behavior of soft materials with combined time- and frequency-resolution is instrumental for improving our fundamental understanding of connections between the microstructural dynamics and the macroscopic mechanical response. Current state-of-the-art techniques are often limited by a compromise between resolution in the time and frequency domain, mainly due to the use of elementary input signals that have not been designed for fast time-evolving systems such as materials undergoing gelation, curing or self-healing. In this work, we develop an optimized and robust excitation signal for time-resolved mechanical spectroscopy through the introduction of joint frequency- and amplitude-modulated exponential chirps. Inspired by the biosonar signals of bats and dolphins, we optimize the signal profile to maximize the signal-to-noise ratio while minimizing spectral leakage with a carefully-designed modulation of the envelope of the chirp. A combined experimental and numerical investigation reveals that there exists an optimal range of window profiles that minimizes the error with respect to standard single frequency sweep methods. The minimum error is set by the noise floor of the instrument, suggesting that the accuracy of an optimally windowed chirp signal is directly comparable to that achievable with a standard frequency sweep, while the acquisition time can be reduced by up to two orders of magnitude, for comparable spectral content. Finally, we demonstrate the ability of this optimized signal to provide time- and frequency-resolved rheometric data by studying the fast gelation process of an acid-induced protein gel. The use of optimally windowed chirps enables a robust rheological characterization of a wide range of soft materials undergoing rapid mutation and has the potential to become an invaluable tool for researchers across different disciplines. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Journal ref: Phys. Rev. X 8, 041042 (2018)

Microstructural rearrangements and their rheological implications in a model Thixotropic Elasto-Visco-Plastic (TEVP) fluid

Authors: Safa Jamali, Gareth H. McKinley, Robert C. Armstrong

Abstract: We identify the sequence of microstructural changes that characterize the evolution of an attractive particulate gel under flow and discuss their implications on macroscopic rheology. Dissipative Particle Dynamics (DPD) is used to monitor shear-driven evolution of a fabric tensor constructed from the ensemble spatial configuration of individual attractive constituents within the gel. By decomposin… ▽ More We identify the sequence of microstructural changes that characterize the evolution of an attractive particulate gel under flow and discuss their implications on macroscopic rheology. Dissipative Particle Dynamics (DPD) is used to monitor shear-driven evolution of a fabric tensor constructed from the ensemble spatial configuration of individual attractive constituents within the gel. By decomposing this tensor into isotropic and non-isotropic components we show that the average coordination number correlates directly with the flow curve of the shear stress vs. shear rate, consistent with theoretical predictions for attractive systems. We show that the evolution in non-isotropic local particle rearrangements are primarily responsible for stress overshoots (strain-hardening) at the inception of steady shear flow and also lead, at larger times and longer scales, to microstructural localization phenomena such as shear banding flow-induced structure formation in the vorticity direction. △ Less

Submitted 2 November, 2016; originally announced November 2016.

Comments: 15 pages, 4 figures

Journal ref: Phys. Rev. Lett. 118, 048003 (2017)

Nonlinear viscoelasticity and generalized failure criterion for polymer gels

Authors: Bavand Keshavarz, Thibaut Divoux, Sébastien Manneville, Gareth H. McKinley

Abstract: Polymer gels behave as soft viscoelastic solids and exhibit a generic nonlinear mechanical response characterized by pronounced stiffening prior to irreversible failure, most often through macroscopic fractures. Here, we aim at capturing the latter scenario for a protein gel using a nonlinear integral constitutive equation built upon ($i$) the linear viscoelastic response of the gel, here well des… ▽ More Polymer gels behave as soft viscoelastic solids and exhibit a generic nonlinear mechanical response characterized by pronounced stiffening prior to irreversible failure, most often through macroscopic fractures. Here, we aim at capturing the latter scenario for a protein gel using a nonlinear integral constitutive equation built upon ($i$) the linear viscoelastic response of the gel, here well described by a power-law relaxation modulus, and ($ii$) the nonlinear viscoelastic properties of the gel, encoded into a "dam** function". Such formalism predicts quantitatively the gel mechanical response to a shear start-up experiment, up to the onset of macroscopic failure. Moreover, as the gel failure involves the irreversible growth of macroscopic cracks, we couple the latter stress response with Bailey's durability criterion for brittle solids in order to predict the critical values of the stress $σ_c$ and strain $γ_c$ at the failure point, and how they scale with the applied shear rate. The excellent agreement between theory and experiments suggests that the crack growth in this soft viscoelastic gel is a Markovian process, and that Baileys' criterion extends well beyond hard materials such as metals, glasses, or minerals. △ Less

Submitted 5 January, 2017; v1 submitted 27 July, 2016; originally announced July 2016.

Comments: 6 pages, 4 figures and 1 pages of supplemental materials

Journal ref: ACS macro Letters 6, 663-667 (2017)

Simultaneous rheo-electric measurements of strongly conductive complex fluids

Authors: Ahmed Helal, Thibaut Divoux, Gareth H. McKinley

Abstract: We introduce a novel apparatus designed for stress-controlled rheometers to perform simultaneous rheological and electrical measurements on strongly conductive complex fluids under shear. By means of a non-toxic liquid metal at room temperature, the electrical connection to the rotating shaft is completed with minimal additional mechanical friction, allowing for simultaneous stress measurements as… ▽ More We introduce a novel apparatus designed for stress-controlled rheometers to perform simultaneous rheological and electrical measurements on strongly conductive complex fluids under shear. By means of a non-toxic liquid metal at room temperature, the electrical connection to the rotating shaft is completed with minimal additional mechanical friction, allowing for simultaneous stress measurements as low as 1 Pa. We use the capabilities of this design to perform an extensive set of rheo-electric experiments on gels formulated from attractive carbon black particles, at concentrations ranging from 4 to 15% wt. First, experiments on gels at rest prepared with different shear history show a robust power-law scaling between the elastic modulus $G'_0$ and the conductivity $σ_0$ of the gels, i.e. $G'_0 \sim σ_0^α$, with $α=1.65 \pm 0.04$ independently of the gel concentration. Second, conductivity measurements performed simultaneously with creep experiments reveal for the first time that plastic events take place in the bulk while the shear rate decreases as a weak power law of time in the early stage of the experiment. The subsequent evolution of the conductivity and shear rate allows us to propose a local yielding scenario that is in agreement with previous velocimetry measurements. Finally, we determine the constitutive rheological and electrical behavior of carbon black gels. Corrections first introduced for mechanical measurements are carefully extended to electrical measurements to accurately distinguish between bulk and surface contributions to the conductivity. As an illustrative example, we examine the constitutive rheo-electric properties of five carbon black gels of different grades, and demonstrate the relevance of the novel rheo-electric apparatus as a versatile characterization tool for strongly conductive complex fluids and their applications. △ Less

Submitted 1 April, 2016; originally announced April 2016.

Comments: 15 pages, 10 figures + supplemental material

Journal ref: Phys. Rev. Applied 6, 064004 (2016)

Criterion for purely elastic Taylor-Couette instability in the flows of shear-banding fluids

Authors: M. A. Fardin, T. J. Ober, C. Gay, G. Grégoire, G. H. McKinley, S. Lerouge

Abstract: In the past twenty years, shear-banding flows have been probed by various techniques, such as rheometry, velocimetry and flow birefringence. In micellar solutions, many of the data collected exhibit unexplained spatio-temporal fluctuations. Recently, it has been suggested that those fluctuations originate from a purely elastic instability of the flow. In cylindrical Couette geometry, the instabili… ▽ More In the past twenty years, shear-banding flows have been probed by various techniques, such as rheometry, velocimetry and flow birefringence. In micellar solutions, many of the data collected exhibit unexplained spatio-temporal fluctuations. Recently, it has been suggested that those fluctuations originate from a purely elastic instability of the flow. In cylindrical Couette geometry, the instability is reminiscent of the Taylor-like instability observed in viscoelastic polymer solutions. In this letter, we describe how the criterion for purely elastic Taylor-Couette instability should be adapted to shear-banding flows. We derive three categories of shear-banding flows with curved streamlines, depending on their stability. △ Less

Submitted 12 August, 2011; originally announced August 2011.

Comments: 6 pages, 3 figures

Potential "ways of thinking" about the shear-banding phenomenon

Authors: M. A. Fardin, T. J. Ober, C. Gay, G. Grégoire, G. H. McKInley, S. Lerouge

Abstract: Shear-banding is a curious but ubiquitous phenomenon occurring in soft matter. The phenomenological similarities between the shear-banding transition and phase transitions has pushed some researchers to adopt a 'thermodynamical' approach, in opposition to the more classical 'mechanical' approach to fluid flows. In this heuristic review, we describe why the apparent dichotomy between those approach… ▽ More Shear-banding is a curious but ubiquitous phenomenon occurring in soft matter. The phenomenological similarities between the shear-banding transition and phase transitions has pushed some researchers to adopt a 'thermodynamical' approach, in opposition to the more classical 'mechanical' approach to fluid flows. In this heuristic review, we describe why the apparent dichotomy between those approaches has slowly faded away over the years. To support our discussion, we give an overview of different interpretations of a single equation, the diffusive Johnson-Segalman (dJS) equation, in the context of shear-banding. We restrict ourselves to dJS, but we show that the equation can be written in various equivalent forms usually associated with opposite approaches. We first review briefly the origin of the dJS model and its initial rheological interpretation in the context of shear-banding. Then we describe the analogy between dJS and reaction-diffusion equations. In the case of anisotropic diffusion, we show how the dJS governing equations for steady shear flow are analogous to the equations of the dynamics of a particle in a quartic potential. Going beyond the existing literature, we then draw on the Lagrangian formalism to describe how the boundary conditions can have a key impact on the banding state. Finally, we reinterpret the dJS equation again and we show that a rigorous effective free energy can be constructed, in the spirit of early thermodynamic interpretations or in terms of more recent approaches exploiting the language of irreversible thermodynamics. △ Less

Submitted 6 July, 2011; originally announced July 2011.

Comments: 14 pages, 6 figures, tutorial review

Elastic turbulence in shear banding wormlike micelles

Authors: M. A. Fardin, D. Lopez, J. Croso, G. Grégoire, O. Cardoso, G. H. McKinley, S. Lerouge

Abstract: We study the dynamics of the Taylor-Couette flow of shear banding wormlike micelles. We focus on the high shear rate branch of the flow curve and show that for sufficiently high Weissenberg numbers, this branch becomes unstable. This instability is strongly sub-critical and is associated with a shear stress jump. We find that this increase of the flow resistance is related to the nucleation of tur… ▽ More We study the dynamics of the Taylor-Couette flow of shear banding wormlike micelles. We focus on the high shear rate branch of the flow curve and show that for sufficiently high Weissenberg numbers, this branch becomes unstable. This instability is strongly sub-critical and is associated with a shear stress jump. We find that this increase of the flow resistance is related to the nucleation of turbulence. The flow pattern shows similarities with the elastic turbulence, so far only observed for polymer solutions. The unstable character of this branch led us to propose a scenario that could account for the recent observations of Taylor-like vortices during the shear banding flow of wormlike micelles. △ Less

Submitted 26 April, 2010; originally announced April 2010.

Fingerprinting Soft Materials: A Framework for Characterizing Nonlinear Viscoelasticity

Authors: Randy H. Ewoldt, Gareth H. McKinley, A. E. Hosoi

Abstract: We introduce a comprehensive scheme to physically quantify both viscous and elastic rheological nonlinearities simultaneously, using an imposed large amplitude oscillatory shear (LAOS) strain. The new framework naturally lends a physical interpretation to commonly reported Fourier coefficients of the nonlinear stress response. Additionally, we address the ambiguities inherent in the standard def… ▽ More We introduce a comprehensive scheme to physically quantify both viscous and elastic rheological nonlinearities simultaneously, using an imposed large amplitude oscillatory shear (LAOS) strain. The new framework naturally lends a physical interpretation to commonly reported Fourier coefficients of the nonlinear stress response. Additionally, we address the ambiguities inherent in the standard definitions of viscoelastic moduli when extended into the nonlinear regime, and define new measures which reveal behavior that is obscured by conventional techniques. △ Less

Submitted 29 October, 2007; originally announced October 2007.

Comments: 10 pages, 3 figures, full-page double-space preprint format

Journal ref: Ewoldt, R. H., A. E. Hosoi and G. H. McKinley, "New measures for characterizing nonlinear viscoelasticity in large amplitude oscillatory shear," Journal of Rheology 52(6), 1427-1458 (2008)

Iterated stretching and multiple beads-on-a-string phenomena in dilute solutions of highly-extensible flexible polymers

Authors: Monica S. N. Oliveira, Gareth H. McKinley

Abstract: The dynamics of elastocapillary thinning in high molecular weight polymer solutions are re-examined using high-speed digital video microscopy. At long times, the evolution of the viscoelastic thread deviates from self-similar exponential decay and competition of elastic, capillary and inertial forces leads to the formation of a periodic array of beads connected by axially-uniform ligaments. This… ▽ More The dynamics of elastocapillary thinning in high molecular weight polymer solutions are re-examined using high-speed digital video microscopy. At long times, the evolution of the viscoelastic thread deviates from self-similar exponential decay and competition of elastic, capillary and inertial forces leads to the formation of a periodic array of beads connected by axially-uniform ligaments. This configuration is itself unstable and successive instabilities propagate from the necks connecting the beads and ligaments. This iterated process results in the development of multiple generations of beads in agreement with predictions of Chang et al. (1999), although experiments yield a different recursion relation between successive generations. At long times, finite extensibility truncates the iterated instability and axial translation of the bead arrays along the interconnecting threads leads to progressive coalescence before rupture of the fluid column. △ Less

Submitted 8 February, 2005; originally announced February 2005.

Comments: Submitted to Physics of Fluids. Contains 15 pages, including 6 figures and 1 table

The beads-on-string structure of viscoelastic threads

Authors: C. Clasen, J. Eggers, M. A. Fontelos, J. Li, G. H. McKinley

Abstract: By adding minute concentrations of a high molecular weight polymer, liquid jets or bridges collapsing under the action of surface tension develop a characteristic shape of uniform threads connecting spherical fluid drops. In this paper, high-precision measurements of this beads-on-string structure are combined with a theoretical analysis of the limiting case of large polymer relaxation times, fo… ▽ More By adding minute concentrations of a high molecular weight polymer, liquid jets or bridges collapsing under the action of surface tension develop a characteristic shape of uniform threads connecting spherical fluid drops. In this paper, high-precision measurements of this beads-on-string structure are combined with a theoretical analysis of the limiting case of large polymer relaxation times, for which the evolution can be divided into two distinct regimes. This excludes the very late stages of the evolution, for which the polymers have become fully stretched. For times smaller than the polymer relaxation time, over which the beads-on-string structure develops, we give a simplified local description, which still contains the full complexity of the problem. At times much larger than the relaxation time, we show that the solution consists of exponentially thinning threads connecting almost spherical drops. Both experiment and theoretical analysis of a one-dimensional model equation reveal a self-similar structure of the corner where a thread is attached to the neighbouring drops. △ Less

Submitted 24 July, 2003; originally announced July 2003.