-
Realisation of de Gennes$'$ Absolute Superconducting Switch with a Heavy Metal Interface
Authors:
Hisakazu Matsuki,
Alberto Hijano,
Grzegorz P. Mazur,
Stefan Ilic,
Binbin Wang,
Yuliya Alekhina,
Kohei Ohnishi,
Sachio Komori,
Yang Li,
Nadia Stelmashenko,
Niladri Banerjee,
Lesley F. Cohen,
David W. McComb,
F. Sebastian Bergeret,
Guang Yang,
Jason W. A. Robinson
Abstract:
In 1966, Pierre-Gilles de Gennes proposed a non-volatile mechanism for switching superconductivity on and off in a magnetic device. This involved a superconductor (S) sandwiched between ferromagnetic (F) insulators in which the net magnetic exchange field could be controlled through the magnetisation-orientation of the F layers. Because superconducting switches are attractive for a range of applic…
▽ More
In 1966, Pierre-Gilles de Gennes proposed a non-volatile mechanism for switching superconductivity on and off in a magnetic device. This involved a superconductor (S) sandwiched between ferromagnetic (F) insulators in which the net magnetic exchange field could be controlled through the magnetisation-orientation of the F layers. Because superconducting switches are attractive for a range of applications, extensive studies have been carried out on $F/S/F$ structures. Although these have demonstrated a sensitivity of the superconducting critical temperature ($T_{c}$) to parallel (P) and antiparallel (AP) magnetisation-orientations of the F layers, corresponding shifts in $T_c$ (i.e., $ΔT_c = T_{c,AP} - T_{c,P}$) are lower than predicted with $ΔT_c$ only a small fraction of $T_{c,AP}$, precluding the development of applications. Here, we report $EuS/Au/Nb/EuS$ structures where EuS is an insulating ferromagnet, Nb is a superconductor and Au is a heavy metal. For P magnetisations, the superconducting state in this structure is quenched down to the lowest measured temperature of 20 mK meaning that $ΔT_c/T_{c,AP}$ is practically 1. The key to this so-called absolute switching effect is a sizable spin-mixing conductance at the $EuS/Au$ interface which ensures a robust magnetic proximity effect, unlocking the potential of $F/S/F$ switches for low power electronics.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
The Impact of Local Strain Fields in Non-Collinear Antiferromagnetic Films
Authors:
Freya Johnson,
Frederic Rendell-Bhatti,
Bryan D. Esser,
Aisling Hussey,
David W. McComb,
Jan Zemen,
David Boldrin,
Lesley Cohen
Abstract:
Antiferromagnets hosting structural or magnetic order that breaks time reversal symmetry are of increasing interest for 'beyond von Neumann computing' applications because the topology of their band structure allows for intrinsic physical properties, exploitable in integrated memory and logic function. One such group are the non-collinear antiferromagnets. Essential for domain manipulation is the…
▽ More
Antiferromagnets hosting structural or magnetic order that breaks time reversal symmetry are of increasing interest for 'beyond von Neumann computing' applications because the topology of their band structure allows for intrinsic physical properties, exploitable in integrated memory and logic function. One such group are the non-collinear antiferromagnets. Essential for domain manipulation is the existence of small net moments found routinely when the material is synthesised in thin film form and attributed to symmetry-breaking caused by spin canting, either from the Dzyaloshinskii-Moriya interaction or from strain. Although the spin arrangement of these materials makes them highly sensitive to strain, there is little understanding about the influence of local strain fields caused by lattice defects on global properties, such as magnetisation and anomalous Hall effect. This premise is investigated by examining non-collinear films that are either highly lattice mismatched or closely matched to their substrate. In either case, edge dislocation networks are generated and for the former case these extend throughout the entire film thickness, creating large local strain fields. These strain fields allow for finite intrinsic magnetisation in seemly structurally relaxed films and influence the antiferromagnetic domain state and the intrinsic anomalous Hall effect.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Epitaxial Kagome Thin Films as a Platform for Topological Flat Bands
Authors:
Shuyu Cheng,
M. Nrisimhamurty,
Tong Zhou,
Nuria Bagues,
Wenyi Zhou,
Alexander J. Bishop,
Igor Lyalin,
Chris Jozwiak,
Aaron Bostwick,
Eli Rotenberg,
David W. McComb,
Igor Zutic,
Roland K. Kawakami
Abstract:
Systems with flat bands are ideal for studying strongly correlated electronic states and related phenomena. Among them, kagome-structured metals such as CoSn have been recognized as promising candidates due to the proximity between the flat bands and the Fermi level. A key next step will be to realize epitaxial kagome thin films with flat bands to enable tuning of the flat bands across the Fermi l…
▽ More
Systems with flat bands are ideal for studying strongly correlated electronic states and related phenomena. Among them, kagome-structured metals such as CoSn have been recognized as promising candidates due to the proximity between the flat bands and the Fermi level. A key next step will be to realize epitaxial kagome thin films with flat bands to enable tuning of the flat bands across the Fermi level via electrostatic gating or strain. Here we report the band structures of epitaxial CoSn thin films grown directly on insulating substrates. Flat bands are observed using synchrotron-based angle-resolved photoemission spectroscopy (ARPES). The band structure is consistent with density functional theory (DFT) calculations, and the transport properties are quantitatively explained by the band structure and semiclassical transport theory. Our work paves the way to realize flat band-induced phenomena through fine-tuning of flat bands in kagome materials.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
Phase imaging in scanning transmission electron microscopy using bright-field balanced divergency method
Authors:
Binbin Wang,
David W. McComb
Abstract:
We introduce a phase imaging mechanism for scanning transmission electron microscopy that exploits the complementary intensity changes of transmitted disks at different scattering angles. For scanning transmission electron microscopy, this method provides a straightforward, dose-efficient, and noise-robust phase imaging, from atomic resolution to intermediate length scales, as a function of scatte…
▽ More
We introduce a phase imaging mechanism for scanning transmission electron microscopy that exploits the complementary intensity changes of transmitted disks at different scattering angles. For scanning transmission electron microscopy, this method provides a straightforward, dose-efficient, and noise-robust phase imaging, from atomic resolution to intermediate length scales, as a function of scattering angles and probe defocus. At atomic resolution, we demonstrate that the phase imaging using the method can detect both light and heavy atomic columns. Furthermore, we experimentally apply the method to the imaging of nanoscale magnetic phases in FeGe samples. Compared with conventional methods, phase retrieval using the new method has higher effective spatial resolution and robustness to non-phase background contrast. Our method complements traditional phase imaging modalities in electron microscopy and has the potential to be extended to other scanning transmission techniques and to characterize many emerging material systems.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
An Atomically Tailored Chiral Magnet with Small Skyrmions at Room Temperature
Authors:
Tao Liu,
Camelia M. Selcu,
Binbin Wang,
Núria Bagués,
Po-Kuan Wu,
Timothy Q. Hartnett,
Shuyu Cheng,
Denis Pelekhov,
Roland A. Bennett,
Joseph Perry Corbett,
Jacob R. Repicky,
Brendan McCullian,
P. Chris Hammel,
Jay A. Gupta,
Mohit Randeria,
Prasanna V. Balachandran,
David W. McComb,
Roland K. Kawakami
Abstract:
Creating materials that do not exist in nature can lead to breakthroughs in science and technology. Magnetic skyrmions are topological excitations that have attracted great attention recently for their potential applications in low power, ultrahigh density memory. A major challenge has been to find materials that meet the dual requirement of small skyrmions stable at room temperature. Here we meet…
▽ More
Creating materials that do not exist in nature can lead to breakthroughs in science and technology. Magnetic skyrmions are topological excitations that have attracted great attention recently for their potential applications in low power, ultrahigh density memory. A major challenge has been to find materials that meet the dual requirement of small skyrmions stable at room temperature. Here we meet both these goals by develo** epitaxial FeGe films with excess Fe using atomic layer molecular beam epitaxy (MBE) far from thermal equilibrium. Our novel atomic layer design permits the incorporation of 20% excess Fe while maintaining a non-centrosymmetric crystal structure supported by theoretical calculations and necessary for stabilizing skyrmions. We show that the Curie temperature is well above room temperature, and that the skyrmions probed by topological Hall effect have sizes down to 15 nm as imaged by Lorentz transmission electron microscopy (LTEM) and magnetic force microscopy (MFM). Our results illustrate new avenues for creating artificial materials tailored at the atomic scale that can impact nanotechnology.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
Room-Temperature Magnetic Skyrmions in Pt/Co/Cu Multilayers
Authors:
Shuyu Cheng,
Núria Bagués,
Camelia M. Selcu,
Jacob B. Freyermuth,
Ziling Li,
Binbin Wang,
Shekhar Das,
P. Chris Hammel,
Mohit Randeria,
David W. McComb,
Roland K. Kawakami
Abstract:
Magnetic skyrmions are promising for next-generation information storage and processing owing to their potential advantages in data storage density, robustness, and energy efficiency. The magnetic multilayers consisting of Pt, Co, and a third metal element $X$ provide an ideal platform to study the skyrmions due to their highly tunable magnetic properties. Here, we report the observation of room-t…
▽ More
Magnetic skyrmions are promising for next-generation information storage and processing owing to their potential advantages in data storage density, robustness, and energy efficiency. The magnetic multilayers consisting of Pt, Co, and a third metal element $X$ provide an ideal platform to study the skyrmions due to their highly tunable magnetic properties. Here, we report the observation of room-temperature bubble-like Néel skyrmions in epitaxial Pt/Co/Cu multilayers in samples with multidomain states in zero field. The magneto-optic Kerr effect (MOKE) and superconducting quantum interference device (SQUID) magnetometry are applied to investigate the shapes of the hysteresis loops, the magnetic anisotropy, and the saturation magnetization. By tuning the Co thickness and the number of periods, we achieve perpendicular and in-plane magnetized states and multidomain states that are identified by a wasp-waisted hysteresis loop. Skyrmions are directly imaged by magnetic force microscopy (MFM) and Lorentz transmission electron microscopy (LTEM). The development of room-temperature skyrmions in Pt/Co/Cu multilayers may lead to advances in skyrmion-related research and applications.
△ Less
Submitted 28 August, 2023; v1 submitted 3 March, 2023;
originally announced March 2023.
-
Atomic Layer Epitaxy of Kagome Magnet Fe${_3}$Sn${_2}$ and Sn-modulated Heterostructures
Authors:
Shuyu Cheng,
Igor Lyalin,
Alexander J. Bishop,
Roland K. Kawakami,
Binbin Wang,
Núria Bagués,
David W. McComb
Abstract:
Magnetic materials with kagome crystal structure exhibit rich physics such as frustrated magnetism, skyrmion formation, topological flat bands, and Dirac/Weyl points. Until recently, most studies on kagome magnets have been performed on bulk crystals or polycrystalline films. Here we report the atomic layer molecular beam epitaxy synthesis of high-quality thin films of topological kagome magnet Fe…
▽ More
Magnetic materials with kagome crystal structure exhibit rich physics such as frustrated magnetism, skyrmion formation, topological flat bands, and Dirac/Weyl points. Until recently, most studies on kagome magnets have been performed on bulk crystals or polycrystalline films. Here we report the atomic layer molecular beam epitaxy synthesis of high-quality thin films of topological kagome magnet Fe${_3}$Sn${_2}$. Structural and magnetic characterization of Fe${_3}$Sn${_2}$ on epitaxial Pt(111) identifies highly ordered films with c-plane orientation and an in-plane magnetic easy axis. Studies of the local magnetic structure by anomalous Nernst effect imaging reveals in-plane oriented micrometer size domains. Superlattice structures consisting of Fe${_3}$Sn${_2}$ and Fe${_3}$Sn are also synthesized by atomic layer molecular beam epitaxy, demonstrating the ability to modulate the sample structure at the atomic level. The realization of high-quality films by atomic layer molecular beam epitaxy opens the door to explore the rich physics of this system and investigate novel spintronic phenomena by interfacing Fe${_3}$Sn${_2}$ with other materials.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Manipulating Acoustic and Plasmonic Modes in Gold Nanostars
Authors:
Sharmistha Chatterjee,
Loredana Ricciardi,
Julia I. Deitz,
Robert E. A. Williams,
David W. McComb,
Giuseppe Strangi
Abstract:
In this contribution experimental evidence of plasmonic edge modes and breathing acoustic modes in gold nanostars (AuNS) is reported. AuNS are synthesized in a surfactant-free, one-step wet-chemistry method. Optical extinction measurements of AuNS confirm the presence of localized surface plasmon resonances (LSPRs), while electron energy-loss spectroscopy (EELS) in the scanning transmission electr…
▽ More
In this contribution experimental evidence of plasmonic edge modes and breathing acoustic modes in gold nanostars (AuNS) is reported. AuNS are synthesized in a surfactant-free, one-step wet-chemistry method. Optical extinction measurements of AuNS confirm the presence of localized surface plasmon resonances (LSPRs), while electron energy-loss spectroscopy (EELS) in the scanning transmission electron microscope (STEM) shows the spatial distribution of LSPRs and reveals the presence of acoustic breathing modes. Plasmonic hot-spots generated at the pinnacle of the sharp spikes, due to the optically active edge dipolar mode, allow significant intensity enhancement of local fields, hot-electron injection, and thus useful for size detection of small protein molecules. The breathing modes observed away from the apices of the nanostars are identified as stimulated dark modes - they have an acoustic nature - and likely originate from the confinement of the surface plasmon by the geometrical boundaries of a nanostructure. The presence of both types of modes is verified by numerical simulations. Both these modes offer the possibility to design nanoplasmonic antenna based on AuNS, which can provide information both on mass and polarizability of biomolecules using a two-step molecular detection process.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Spin-Hall Topological Hall Effect in Highly Tunable Pt/Ferrimagnetic-Insulator Bilayers
Authors:
Adam S. Ahmed,
Aidan J. Lee,
Nuria Bagués,
Brendan A. McCullian,
Ahmed M. A. Thabt,
Avery Perrine,
James R. Rowland,
Mohit Randeria,
P. Chris Hammel,
David W. McComb,
Fengyuan Yang
Abstract:
Electrical detection of topological magnetic textures such as skyrmions is currently limited to conducting materials. While magnetic insulators offer key advantages for skyrmion technologies with high speed and low loss, they have not yet been explored electrically. Here, we report a prominent topological Hall effect in Pt/Tm$_3$Fe$_5$O$_{12}$ bilayers, where the pristine Tm$_3$Fe$_5$O$_{12}$ epit…
▽ More
Electrical detection of topological magnetic textures such as skyrmions is currently limited to conducting materials. While magnetic insulators offer key advantages for skyrmion technologies with high speed and low loss, they have not yet been explored electrically. Here, we report a prominent topological Hall effect in Pt/Tm$_3$Fe$_5$O$_{12}$ bilayers, where the pristine Tm$_3$Fe$_5$O$_{12}$ epitaxial films down to 1.25 unit cell thickness allow for tuning of topological Hall stability over a broad range from 200 to 465 K through atomic-scale thickness control. Although Tm$_3$Fe$_5$O$_{12}$ is insulating, we demonstrate the detection of topological magnetic textures through a novel phenomenon: 'spin-Hall topological Hall effect' (SH-THE), where the interfacial spin-orbit torques allow spin-Hall-effect generated spins in Pt to experience the unique topology of the underlying skyrmions in Tm$_3$Fe$_5$O$_{12}$. This novel electrical detection phenomenon paves a new path for utilizing a large family of magnetic insulators in future skyrmion technologies.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
Ferromagnetic Epitaxial μ-Fe$_{2}$O$_{3}$ on β-Ga$_{2}$O$_{3}$: A New Monoclinic form of Fe$_{2}$O$_{3}$
Authors:
John S. Jamison,
Brelon J. May,
Julia I. Deitz,
Szu-Chia Chien,
David W. McComb,
Tyler J. Grassman,
Wolfgang Windl,
Roberto C. Myers
Abstract:
Here we demonstrate a new monoclinic iron oxide phase (μ-Fe$_{2}$O$_{3}$), epitaxially stabilized by growth on (010) β-Ga$_{2}$O$_{3}$. Density functional theory (DFT) calculations find that the lattice parameters of freestanding μ-Fe$_{2}$O$_{3}$ are within ~1% of those of β-Ga$_{2}$O$_{3}$ and that its energy of formation is comparable to that of naturally abundant Fe$_{2}$O$_{3}$ polytypes. A s…
▽ More
Here we demonstrate a new monoclinic iron oxide phase (μ-Fe$_{2}$O$_{3}$), epitaxially stabilized by growth on (010) β-Ga$_{2}$O$_{3}$. Density functional theory (DFT) calculations find that the lattice parameters of freestanding μ-Fe$_{2}$O$_{3}$ are within ~1% of those of β-Ga$_{2}$O$_{3}$ and that its energy of formation is comparable to that of naturally abundant Fe$_{2}$O$_{3}$ polytypes. A superlattice of μ-Fe$_{2}$O$_{3}$/β-Ga$_{2}$O$_{3}$ is grown by plasma assisted molecular beam epitaxy, with resulting high-resolution x-ray diffraction (XRD) measurements indicating that the μ-Fe$_{2}$O$_{3}$ layers are lattice-matched to the substrate. The measured out-of-plane (b) lattice parameter of 3.12 $\pm$ 0.4 Å is in agreement with the predicted lattice constants and atomic-resolution scanning transmission electron microscopy (STEM) images confirm complete registry of the μ-Fe$_{2}$O$_{3}$ layers with β-Ga$_{2}$O$_{3}$. Finally, DFT modeling predicts that bulk μ-Fe$_{2}$O$_{3}$ is antiferromagnetic, while the interface region between μ-Fe$_{2}$O$_{3}$ and β-Ga$_{2}$O$_{3}$ leads to ferromagnetic coupling between interface Fe$^{3+}$ cations selectively occupying tetrahedral positions. Magnetic hysteresis persisting to room temperature is observed via SQUID measurements, consistent with the computationally predicted interface magnetism.
△ Less
Submitted 9 September, 2019; v1 submitted 15 January, 2019;
originally announced January 2019.
-
Room Temperature Intrinsic Ferromagnetism in Epitaxial Manganese Selenide Films in the Monolayer Limit
Authors:
Dante J. O'Hara,
Tiancong Zhu,
Amanda H. Trout,
Adam S. Ahmed,
Yunqiu,
Luo,
Choong Hee Lee,
Mark R. Brenner,
Siddharth Rajan,
Jay A. Gupta,
David W. McComb,
Roland K. Kawakami
Abstract:
Monolayer van der Waals (vdW) magnets provide an exciting opportunity for exploring two-dimensional (2D) magnetism for scientific and technological advances, but the intrinsic ferromagnetism has only been observed at low temperatures. Here, we report the observation of room temperature ferromagnetism in manganese selenide (MnSe$_x$) films grown by molecular beam epitaxy (MBE). Magnetic and structu…
▽ More
Monolayer van der Waals (vdW) magnets provide an exciting opportunity for exploring two-dimensional (2D) magnetism for scientific and technological advances, but the intrinsic ferromagnetism has only been observed at low temperatures. Here, we report the observation of room temperature ferromagnetism in manganese selenide (MnSe$_x$) films grown by molecular beam epitaxy (MBE). Magnetic and structural characterization provides strong evidence that in the monolayer limit, the ferromagnetism originates from a vdW manganese diselenide (MnSe$_2$) monolayer, while for thicker films it could originate from a combination of vdW MnSe$_2$ and/or interfacial magnetism of $α$-MnSe(111). Magnetization measurements of monolayer MnSe$_x$ films on GaSe and SnSe$_2$ epilayers show ferromagnetic ordering with large saturation magnetization of ~ 4 Bohr magnetons per Mn, which is consistent with density functional theory calculations predicting ferromagnetism in monolayer 1T-MnSe$_2$. Growing MnSe$_x$ films on GaSe up to high thickness (~ 40 nm) produces $α$-MnSe(111), and an enhanced magnetic moment (~ 2x) compared to the monolayer MnSe$_x$ samples. Detailed structural characterization by scanning transmission electron microscopy (STEM), scanning tunneling microscopy (STM), and reflection high energy electron diffraction (RHEED) reveal an abrupt and clean interface between GaSe(0001) and $α$-MnSe(111). In particular, the structure measured by STEM is consistent with the presence of a MnSe$_2$ monolayer at the interface. These results hold promise for potential applications in energy efficient information storage and processing.
△ Less
Submitted 22 February, 2018;
originally announced February 2018.
-
Magnetic Proximity Effect in Pt/CoFe2O4 Bilayers
Authors:
Walid Amamou,
Igor V. Pinchuk,
Amanda Hanks,
Robert Williams,
Nikolas Antolin,
Adam Goad,
Dante J. O'Hara,
Adam S. Ahmed,
Wolfgang Windl,
David W. McComb,
Roland K. Kawakami
Abstract:
We observe the magnetic proximity effect (MPE) in Pt/CoFe2O4 bilayers grown by molecular beam epitaxy. This is revealed through angle-dependent magnetoresistance measurements at 5 K, which isolate the contributions of induced ferromagnetism (i.e. anisotropic magnetoresistance) and spin Hall effect (i.e. spin Hall magnetoresistance) in the Pt layer. The observation of induced ferromagnetism in Pt v…
▽ More
We observe the magnetic proximity effect (MPE) in Pt/CoFe2O4 bilayers grown by molecular beam epitaxy. This is revealed through angle-dependent magnetoresistance measurements at 5 K, which isolate the contributions of induced ferromagnetism (i.e. anisotropic magnetoresistance) and spin Hall effect (i.e. spin Hall magnetoresistance) in the Pt layer. The observation of induced ferromagnetism in Pt via AMR is further supported by density functional theory calculations and various control measurements including insertion of a Cu spacer layer to suppress the induced ferromagnetism. In addition, anomalous Hall effect measurements show an out-of-plane magnetic hysteresis loop of the induced ferromagnetic phase with larger coercivity and larger remanence than the bulk CoFe2O4. By demonstrating MPE in Pt/CoFe2O4, these results establish the spinel ferrite family as a promising material for MPE and spin manipulation via proximity exchange fields.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Chiral Bobbers and Skyrmions in Epitaxial FeGe/Si(111) Films
Authors:
Adam S. Ahmed,
James Rowland,
Bryan D. Esser,
Sarah Dunsiger,
David W. McComb,
Mohit Randeria,
Roland K. Kawakami
Abstract:
We report experimental and theoretical evidence for the formation of chiral bobbers - an interfacial topological spin texture - in FeGe films grown by molecular beam epitaxy (MBE). After establishing the presence of skyrmions in FeGe/Si(111) thin film samples through Lorentz transmission electron microscopy and topological Hall effect, we perform magnetization measurements that reveal an inverse r…
▽ More
We report experimental and theoretical evidence for the formation of chiral bobbers - an interfacial topological spin texture - in FeGe films grown by molecular beam epitaxy (MBE). After establishing the presence of skyrmions in FeGe/Si(111) thin film samples through Lorentz transmission electron microscopy and topological Hall effect, we perform magnetization measurements that reveal an inverse relationship between film thickness and the slope of the susceptibility (d\c{hi}/dH). We present evidence for the evolution as a function of film thickness, L, from a skyrmion phase for L < LD/2 to a cone phase with chiral bobbers at the interface for L > LD/2, where LD ~ 70 nm is the FeGe pitch length. We show using micromagnetic simulations that chiral bobbers, earlier predicted to be metastable, are in fact the stable ground state in the presence of an additional interfacial Rashba Dzyaloshinskii-Moriya interaction (DMI).
△ Less
Submitted 14 April, 2018; v1 submitted 26 June, 2017;
originally announced June 2017.
-
Molecular Beam Epitaxy Growth of [CrGe/MnGe/FeGe] Superlattices: Toward Artificial B20 Skyrmion Materials with Tunable Interactions
Authors:
Adam S. Ahmed,
Bryan D. Esser,
James Rowland,
David W. McComb,
Roland K. Kawakami
Abstract:
Skyrmions are localized magnetic spin textures whose stability has been shown theoretically to depend on material parameters including bulk Dresselhaus spin orbit coupling (SOC), interfacial Rashba SOC, and magnetic anisotropy. Here, we establish the growth of a new class of artificial skyrmion materials, namely B20 superlattices, where these parameters could be systematically tuned. Specifically,…
▽ More
Skyrmions are localized magnetic spin textures whose stability has been shown theoretically to depend on material parameters including bulk Dresselhaus spin orbit coupling (SOC), interfacial Rashba SOC, and magnetic anisotropy. Here, we establish the growth of a new class of artificial skyrmion materials, namely B20 superlattices, where these parameters could be systematically tuned. Specifically, we report the successful growth of B20 superlattices comprised of single crystal thin films of FeGe, MnGe, and CrGe on Si(111) substrates. Thin films and superlattices are grown by molecular beam epitaxy and are characterized through a combination of reflection high energy electron diffraction, x-ray diffraction, and cross-sectional scanning transmission electron microscopy (STEM). X-ray energy dispersive spectroscopy (XEDS) distinguishes layers by elemental map** and indicates good interface quality with relatively low levels of intermixing in the [CrGe/MnGe/FeGe] superlattice. This demonstration of epitaxial, single-crystalline B20 superlattices is a significant advance toward tunable skyrmion systems for fundamental scientific studies and applications in magnetic storage and logic.
△ Less
Submitted 16 February, 2017;
originally announced February 2017.
-
Robust Zero-Field Skyrmion Formation in FeGe Epitaxial Thin Films
Authors:
J. C. Gallagher,
K. Y. Meng,
J. T. Brangham,
H. L. Wang,
B. D. Esser,
D. W. McComb,
F. Y. Yang
Abstract:
B20 phase magnetic materials, such as FeGe, have been of significant interests in recent years because they enable magnetic skyrmions, which can potentially lead to low energy cost spintronic applications. One major effort in this emerging field is the stabilization of skyrmions at room temperature and zero external magnetic field. We report the growth of phase-pure FeGe epitaxial thin films on Si…
▽ More
B20 phase magnetic materials, such as FeGe, have been of significant interests in recent years because they enable magnetic skyrmions, which can potentially lead to low energy cost spintronic applications. One major effort in this emerging field is the stabilization of skyrmions at room temperature and zero external magnetic field. We report the growth of phase-pure FeGe epitaxial thin films on Si(111) substrates by ultrahigh vacuum off-axis sputtering. The high crystalline quality of the FeGe films was confirmed by x-ray diffraction and scanning transmission electron microscopy. Hall effect measurements reveal strong topological Hall effect after subtracting out the ordinary and anomalous Hall effects, demonstrating the formation of high density skyrmions in FeGe films between 5 and 275 K. In particular, substantial topological Hall effect was observed at zero magnetic field, showing a robust skyrmion phase without the need of an external magnetic field.
△ Less
Submitted 22 April, 2016;
originally announced April 2016.
-
Observation of spin Seebeck contribution to the transverse thermopower in Ni-Pt and MnBi-Au bulk nanocomposites
Authors:
Stephen R. Boona,
Koen Vandaele,
Isabel N. Boona,
David W. McComb,
Joseph P. Heremans
Abstract:
Transverse thermoelectric devices produce electric fields perpendicular to an incident heat flux. Classically, this process is driven by the Nernst effect in bulk solids, wherein a magnetic field generates a Lorentz force on thermally excited electrons. The spin Seebeck effect (SSE) also produces magnetization-dependent transverse electric fields. SSE is traditionally observed in thin metallic fil…
▽ More
Transverse thermoelectric devices produce electric fields perpendicular to an incident heat flux. Classically, this process is driven by the Nernst effect in bulk solids, wherein a magnetic field generates a Lorentz force on thermally excited electrons. The spin Seebeck effect (SSE) also produces magnetization-dependent transverse electric fields. SSE is traditionally observed in thin metallic films deposited on electrically insulating ferromagnets, but the films' high resistance limits thermoelectric conversion efficiency. Combining Nernst and SSE in bulk materials would enable devices with simultaneously large transverse thermopower and low electrical resistance. Here we demonstrate experimentally this is possible in composites of conducting ferromagnets (Ni or MnBi) containing metallic nanoparticles with strong spin-orbit interactions (Pt or Au). These materials display positive shifts in transverse thermopower attributable to inverse spin Hall electric fields in the nanoparticles. This more than doubles the power output of the Ni-Pt materials, establishing proof-of-principle that SSE persists in bulk nanocomposites.
△ Less
Submitted 27 October, 2016; v1 submitted 19 April, 2016;
originally announced April 2016.
-
Semiconductor Nanowire Light Emitting Diodes Grown on Metal: A Direction towards Large Scale Fabrication of Nanowire Devices
Authors:
A. T. M. Golam Sarwar,
Santino D. Carnevale,
Fan Yang,
Thomas F. Kent,
John J. Jamison,
David W. McComb,
Roberto C. Myers
Abstract:
Bottom up nanowires are attractive for realizing semiconductor devices with extreme heterostructures because strain relaxation through the nanowire sidewalls allows the combination of highly lattice mismatched materials without creating dislocations. The resulting nanowires are used to fabricate light emitting diodes (LEDs), lasers, solar cells and sensors. However, expensive single crystalline su…
▽ More
Bottom up nanowires are attractive for realizing semiconductor devices with extreme heterostructures because strain relaxation through the nanowire sidewalls allows the combination of highly lattice mismatched materials without creating dislocations. The resulting nanowires are used to fabricate light emitting diodes (LEDs), lasers, solar cells and sensors. However, expensive single crystalline substrates are commonly used as substrates for nanowire heterostructures as well as for epitaxial devices, which limits the manufacturability of nanowire devices. Here, we demonstrate nanowire LEDs directly grown and electrically integrated on metal. Optical and structural measurements reveal high-quality, vertically-aligned GaN nanowires on molybdenum and titanium films. Transmission electron microscopy confirms the composition variation in the polarization-graded AlGaN nanowire LEDs. Blue to green electroluminescence is observed from InGaN quantum well active regions, while GaN active regions exhibit ultraviolet emission. These results demonstrate a pathway for large-scale fabrication of solid state lighting and optoelectronics on metal foils or sheets.
△ Less
Submitted 11 June, 2015;
originally announced June 2015.
-
Optical control of internal electric fields in band-gap graded InGaN nanowires
Authors:
N. Erhard,
A. T. M. Golam Sarwar,
F. Yang,
D. W. McComb,
R. C. Myers,
A. W. Holleitner
Abstract:
InGaN nanowires are suitable building blocks for many future optoelectronic devices. We show that a linear grading of the indium content along the nanowire axis from GaN to InN introduces an internal electric field evoking a photocurrent. Consistent with quantitative band structure simulations we observe a sign change in the measured photocurrent as a function of photon flux. This negative differe…
▽ More
InGaN nanowires are suitable building blocks for many future optoelectronic devices. We show that a linear grading of the indium content along the nanowire axis from GaN to InN introduces an internal electric field evoking a photocurrent. Consistent with quantitative band structure simulations we observe a sign change in the measured photocurrent as a function of photon flux. This negative differential photocurrent opens the path to a new type of nanowire-based photodetector. We demonstrate that the photocurrent response of the nanowires is as fast as 1.5 ps.
△ Less
Submitted 12 February, 2015;
originally announced February 2015.
-
Tuning the polarization-induced free hole density in nanowires graded from GaN to AlN
Authors:
A. T. M. Golam Sarwar,
Santino D. Carnevale,
Thomas F. Kent,
Fan Yang,
David W. McComb,
Roberto C. Myers
Abstract:
We report a systematic study of p-type polarization induced do** in graded AlGaN nanowire light emitting diodes grown on silicon wafers by plasma-assisted molecular beam epitaxy. The composition gradient in the p-type base is varied in a set of samples from 0.7 %Al/nm to 4.95 %Al/nm corresponding to negative bound polarization charge densities of 2.2x10^18 cm^-3 to 1.6x10^19 cm^-3. Capacitance m…
▽ More
We report a systematic study of p-type polarization induced do** in graded AlGaN nanowire light emitting diodes grown on silicon wafers by plasma-assisted molecular beam epitaxy. The composition gradient in the p-type base is varied in a set of samples from 0.7 %Al/nm to 4.95 %Al/nm corresponding to negative bound polarization charge densities of 2.2x10^18 cm^-3 to 1.6x10^19 cm^-3. Capacitance measurements and energy band modeling reveal that for gradients greater than or equal to 1.30 %Al/nm, the deep donor concentration is negligible and free hole concentrations roughly equal to the bound polarization charge density are achieved up to 1.6x10^19 cm^-3 at a gradient of 4.95 %Al/nm. Accurate grading lengths in the p- and n-side of the pn-junction are extracted from scanning transmission electron microscopy images and are used to support energy band calculation and capacitance modeling. These results demonstrate the robust nature of p-type polarization do** in nanowires and put an upper bound on the magnitude of deep donor compensation.
△ Less
Submitted 21 October, 2014;
originally announced October 2014.
-
Long-range FMR driven spin pum** through a nonmagnetic insulator
Authors:
Y. Pu,
H. L. Wang,
C. H. Du,
R. Adur,
A. J. Berger,
A. Hauser,
R. E. A. Williams,
D. W. McComb,
E. Johnston-Halperin,
P. C. Hammel,
F. Y. Yang
Abstract:
Ferromagnetic resonance (FMR) driven spin pum** is an emerging technique for injection of a pure spin current from a ferromagnet (FM) into a non-magnetic (NM) material without an accompanying charge current. It is widely believed that this pum** proceeds exclusively via a short-range exchange interaction at the FM/NM interface. Here we report robust, long-range spin pum** from the ferrimagne…
▽ More
Ferromagnetic resonance (FMR) driven spin pum** is an emerging technique for injection of a pure spin current from a ferromagnet (FM) into a non-magnetic (NM) material without an accompanying charge current. It is widely believed that this pum** proceeds exclusively via a short-range exchange interaction at the FM/NM interface. Here we report robust, long-range spin pum** from the ferrimagnetic double perovskite Sr2FeMoO6 (SFMO) into Pt across an insulating barrier up to 200 nm thick, and systematically rule out all known spurious effects. This result demonstrates dynamic spin injection over a distance far beyond the coupling range of the exchange interaction, exposing the need to consider other coupling mechanisms. The characteristic length scale for magnetic textures in Sr2FeMoO6 is approximately 150 nm, resulting from structural antiphase boundaries, thus raising the possibility that magnetic dipole coupling underlies the observed long range spin transfer. This discovery reveals a route to dynamic angular momentum transfer between a FM and a NM in the absence of mediation by itinerant electrons and promises new spin-functional devices employing long-range spin pum**.
△ Less
Submitted 2 April, 2014; v1 submitted 14 May, 2013;
originally announced May 2013.
-
Ultralong Copper Phthalocyanine Nanowires with New Crystal Structure and Broad Optical Absorption
Authors:
Hai Wang,
Soumaya Mauthoor,
Salahud Din,
Jules A. Gardener,
Rio Chang,
Marc Warner,
Gabriel Aeppli,
David W. McComb,
Mary P. Ryan,
Wei Wu,
Andrew J. Fisher,
A. Marshall Stoneham,
Sandrine Heutz
Abstract:
The development of molecular nanostructures plays a major role in emerging organic electronic applications, as it leads to improved performance and is compatible with our increasing need for miniaturisation. In particular, nanowires have been obtained from solution or vapour phase and have displayed high conductivity, or large interfacial areas in solar cells. In all cases however, the crystal str…
▽ More
The development of molecular nanostructures plays a major role in emerging organic electronic applications, as it leads to improved performance and is compatible with our increasing need for miniaturisation. In particular, nanowires have been obtained from solution or vapour phase and have displayed high conductivity, or large interfacial areas in solar cells. In all cases however, the crystal structure remains as in films or bulk, and the exploitation of wires requires extensive post-growth manipulation as their orientations are random. Here we report copper phthalocyanine (CuPc) nanowires with diameters of 10-100 nm, high directionality and unprecedented aspect ratios. We demonstrate that they adopt a new crystal phase, designated eta-CuPc, where the molecules stack along the long axis. The resulting high electronic overlap along the centimetre length stacks achieved in our wires mediates antiferromagnetic couplings and broadens the optical absorption spectrum. The ability to fabricate ultralong, flexible metal phthalocyanine nanowires opens new possibilities for applications of these simple molecules.
△ Less
Submitted 9 December, 2010;
originally announced December 2010.
-
Effect of columnar defects on the pinning properties of NdFeAsO0.85 conglomerate particles
Authors:
J. D. Moore,
L. F. Cohen,
Y. Yeshurun,
A. D. Caplin,
K. Morrison,
K. A. Yates,
C. M. McGilvery,
J. M. Perkins,
D. W. McComb,
C. Trautmann,
Z. A. Ren,
J. Yang,
W. Lu,
X. L. Dong,
Z. X. Zhao
Abstract:
Oxypnictide superconductor NdFeAsO0.85 sample was irradiated with 2 GeV Ta ions at a fluence of 5x10^10 ions/cm2. High resolution transmission electron microscopy study revealed that the irradiation produced columnar-like defects. The effect of these defects on the irreversible magnetisation in polycrystalline randomly oriented fragments was studied as a function of field angle and field sweep r…
▽ More
Oxypnictide superconductor NdFeAsO0.85 sample was irradiated with 2 GeV Ta ions at a fluence of 5x10^10 ions/cm2. High resolution transmission electron microscopy study revealed that the irradiation produced columnar-like defects. The effect of these defects on the irreversible magnetisation in polycrystalline randomly oriented fragments was studied as a function of field angle and field sweep rate. We find that the critical current density is enhanced at fields below the matching field (~1 Tesla) but only marginally. The pinning enhancement is anisotropic and maximum along the defect direction at high temperatures but the pinning then becomes more isotropic at low temperatures. The creep rate is suppressed at high temperatures and at fields below the matching field, indicating the columnar defects are efficient pinning sites at these H and T conditions.
△ Less
Submitted 1 July, 2009;
originally announced July 2009.
-
Evidence for Supercurrent Connectivity in Conglomerate Particles in NdFeAsO1-d
Authors:
J D Moore,
K Morrison,
K A Yates,
A D Caplin,
Y Yeshurun,
L F Cohen,
J M Perkins,
C M McGilvery,
D W McComb,
Z A Ren,
J Yang,
W Lu,
X L Dong,
Z X Zhao
Abstract:
Here we use global and local magnetometry and Hall probe imaging to investigate the electromagnetic connectivity of the superconducting current path in the oxygen-deficient fluorine-free Nd-based oxypnictides. High resolution transmission electron microscopy and scanning electron microscopy show strongly-layered crystallites, evidence for a ~ 5nm amorphous oxide around individual particles, and…
▽ More
Here we use global and local magnetometry and Hall probe imaging to investigate the electromagnetic connectivity of the superconducting current path in the oxygen-deficient fluorine-free Nd-based oxypnictides. High resolution transmission electron microscopy and scanning electron microscopy show strongly-layered crystallites, evidence for a ~ 5nm amorphous oxide around individual particles, and second phase neodymium oxide which may be responsible for the large paramagnetic background at high field and at high temperatures.
From global magnetometry and electrical transport measurements it is clear that there is a small supercurrent flowing on macroscopic sample dimensions (mm), with a lower bound for the average (over this length scale) critical current density of the order of 103 A/cm2. From magnetometry of powder samples and local Hall probe imaging of a single large conglomerate particle ~120 microns it is clear that on smaller scales, there is better current connectivity with a critical current density of the order of 5 x 104 A/cm2. We find enhanced flux creep around the second peak anomaly in the magnetisation curve and an irreversibility line significantly below Hc2(T) as determined by ac calorimetry.
△ Less
Submitted 4 June, 2008;
originally announced June 2008.
-
On the effect of short-range magnetic ordering on electron energy-loss spectra in spinels
Authors:
D. W. McComb,
A. J. Craven,
L. Chioncel,
A. I. Lichtenstein,
F. T. Docherty
Abstract:
The energy-loss near-edge structure (ELNES) at the oxygen $K$ edge in two $AB_2O_4$ spinels (A=Mg, B=Al,Cr) is reported. In $MgAl_2O_4$ the experimental data is successfully modelled within the LDA framework. In the case of $MgCr_2O_4$ spin-polarisation, in the form of antiferromagnetic ordering on the Cr sub-lattice, must be included despite the fact that the measurements were performed at appr…
▽ More
The energy-loss near-edge structure (ELNES) at the oxygen $K$ edge in two $AB_2O_4$ spinels (A=Mg, B=Al,Cr) is reported. In $MgAl_2O_4$ the experimental data is successfully modelled within the LDA framework. In the case of $MgCr_2O_4$ spin-polarisation, in the form of antiferromagnetic ordering on the Cr sub-lattice, must be included despite the fact that the measurements were performed at approximately 30 times above $T_N$. A model in which dynamic short-range antiferromagnetic ordering is present at room temperature is proposed to explain the results of the experiments and calculations.
△ Less
Submitted 14 January, 2004;
originally announced January 2004.
