-
Atomically smooth films of CsSb: a chemically robust visible light photocathode
Authors:
C. T. Parzyck,
C. A. Pennington,
W. J. I. DeBenedetti,
J. Balajka,
E. Echeverria,
H. Paik,
L. Moreschini,
B. D. Faeth,
C. Hu,
J. K. Nangoi,
V. Anil,
T. A. Arias,
M. A. Hines,
D. G. Schlom,
A. Galdi,
K. M. Shen,
J. M. Maxson
Abstract:
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and co…
▽ More
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and contamination, must be overcome. By exploring the growth of CsxSb thin films monitored by in situ electron diffraction, the conditions to reproducibly synthesize atomically smooth films of CsSb on 3C-SiC (100) and graphene coated TiO2 (110) substrates are identified, and detailed structural, morphological, and electronic characterization is presented. These films combine high quantum efficiency in the visible (up to 1.2% at 400 nm), an easily accessible photoemission threshold of 550 nm, low surface roughness (down to 600 pm on a 1 um scale), and a robustness against oxidation up to 15 times greater then Cs3Sb. These properties suggest that CsSb has the potential to operate as an alternative to Cs$_3$Sb in electron source applications where the demands of the vacuum environment might otherwise preclude the use of traditional alkali antimonides.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Multi-scale time-resolved electron diffraction: A case study in moiré materials
Authors:
C. J. R. Duncan,
M. Kaemingk,
W. H. Li,
M. B. Andorf,
A. C. Bartnik,
A. Galdi,
M. Gordon,
C. A. Pennington,
I. V. Bazarov,
H. J. Zeng,
F. Liu,
D. Luo,
A. Sood,
A. M. Lindenberg,
M. W. Tate,
D. A. Muller,
J. Thom-Levy,
S. M. Gruner,
J. M. Maxson
Abstract:
Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We dep…
▽ More
Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe$_2$/MoSe$_2$ 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector's high frame rate, we show that a chop** technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe$_2$/MoSe$_2$ and resolves distinct diffusion mechanisms in space and time.
△ Less
Submitted 27 July, 2023; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Ab initio study of the crystal and electronic structure of mono- and bi-alkali antimonides: Stability, Goldschmidt-like tolerance factors, and optical properties
Authors:
J. K. Nangoi,
M. Gaowei,
A. Galdi,
J. M. Maxson,
S. Karkare,
J. Smedley,
T. A. Arias
Abstract:
Mono- and bi-alkali antimonides, X$_2$YSb (X and Y from Group I), are promising for next-generation electron emitters due to their capability of producing high-quality electron beams. However, these materials are not yet well understood, in part due to the technical challenges in growing pure, ordered alkali antimonides. For example, in the current literature there is a lack of complete understand…
▽ More
Mono- and bi-alkali antimonides, X$_2$YSb (X and Y from Group I), are promising for next-generation electron emitters due to their capability of producing high-quality electron beams. However, these materials are not yet well understood, in part due to the technical challenges in growing pure, ordered alkali antimonides. For example, in the current literature there is a lack of complete understanding of the mechanically stable crystal structures of these materials. As a first step towards understanding this issue, this paper presents an ab initio study of stability of single-crystal mono- and bi-alkali antimonides in the $D0_3$ structure, the structure generally assumed in the literature for these materials. Finding that many of these materials actually are unstable in the $D0_3$ structure, we formulate a new set of Goldschmidt-like tolerance factors that accurately predict $D0_3$ stability using a procedure analogous to machine-learning perceptron-based analysis. Next, we consider possible stable structures for materials that we predict to be unstable in the $D0_3$ structure. Taking as examples the mono- and bi-alkali antimonides Cs$_3$Sb and Cs$_2$KSb, which also are technologically interesting for photoemission and photoabsorption applications, respectively, we note that the most unstable phonon displacements are consistent with the cubic structure, and we therefore perform extensive ab initio searches to identify potential ground-state structures in a cubic lattice. Our X-ray diffraction experiments confirm that indeed these two materials are not stable in the $D0_3$ structure and show scattering that is consistent with our new, proposed stable structures. Finally, we explore ab initio the implications of the breaking of the $D0_3$ symmetry on the electronic structure, showing significant impact on the location of the optical absorption edge.
△ Less
Submitted 27 May, 2022;
originally announced May 2022.
-
A single-crystal alkali antimonide photocathode: high efficiency in the ultra-thin limit
Authors:
C. T. Parzyck,
A. Galdi,
J. K. Nangoi,
W. J. I. DeBenedetti,
J. Balajka,
B. D. Faeth,
H. Paik,
C. Hu,
T. A. Arias,
M. A. Hines,
D. G. Schlom,
K. M. Shen,
J. M. Maxson
Abstract:
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films…
▽ More
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films of Cs$_3$Sb on 3C-SiC (001) using molecular-beam epitaxy. Films as thin as 4 nm have quantum efficiencies exceeding 2\% at 532 nm. We also find that epitaxial films have an order of magnitude larger quantum efficiency at 650 nm than comparable polycrystalline films on Si. Additionally, these films permit angle-resolved photoemission spectroscopy measurements of the electronic structure, which are found to be in good agreement with theory. Epitaxial films open the door to dramatic brightness enhancements via increased efficiency near threshold, reduced surface disorder, and the possibility of engineering new photoemission functionality at the level of single atomic layers.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
Lossless monochromation for electron microscopy with pulsed photoemission sources and rf cavities
Authors:
Cameron J. R. Duncan,
David A. Muller,
Jared M. Maxson
Abstract:
Resonant radiofrequency cavities enable exquisite time-energy control of electron beams when synchronized with laser driven photoemission. We present a lossless monochromator design that exploits this fine control in the one-electron-per-pulse regime. The theoretically achievable maximum beam current on target is orders of magnitude greater than state-of-the-art monochromators for the same spatial…
▽ More
Resonant radiofrequency cavities enable exquisite time-energy control of electron beams when synchronized with laser driven photoemission. We present a lossless monochromator design that exploits this fine control in the one-electron-per-pulse regime. The theoretically achievable maximum beam current on target is orders of magnitude greater than state-of-the-art monochromators for the same spatial and energy resolution. This improvement is the result of monochromating in the time domain, unconstrained by the transverse brightness of the electron source. We show analytically and confirm numerically that cavity parameters chosen to minimize energy spread perform the additional function of undoing the appreciable effect of chromatic aberration in the upstream optics. We argue that our design has significant applications in both ultra-fast and non-time-resolved microscopy, provided photoelectron sources of sufficiently small size and laser sources of sufficiently high repetition rate. Our design achieves in simulations more than two orders of magnitude reduction in beam energy spread, down to single digit meV. Overcoming the minimum probe-size limit that chromatic aberration imposes, our design clears a path for high-current, high-resolution electron beam applications at primary energies from single to hundreds of keV.
△ Less
Submitted 5 January, 2021; v1 submitted 25 February, 2020;
originally announced February 2020.
