-
Calculating composite-particle spectra in Hamiltonian formalism and demonstration in 2-flavor QED$_{1+1\text{d}}$
Authors:
Etsuko Itou,
Akira Matsumoto,
Yuya Tanizaki
Abstract:
We consider three distinct methods to compute the mass spectrum of gauge theories in the Hamiltonian formalism: (1) correlation-function scheme, (2) one-point-function scheme, and (3) dispersion-relation scheme. The first one examines spatial correlation functions as we do in the conventional Euclidean Monte Carlo simulations. The second one uses the boundary effect to efficiently compute the mass…
▽ More
We consider three distinct methods to compute the mass spectrum of gauge theories in the Hamiltonian formalism: (1) correlation-function scheme, (2) one-point-function scheme, and (3) dispersion-relation scheme. The first one examines spatial correlation functions as we do in the conventional Euclidean Monte Carlo simulations. The second one uses the boundary effect to efficiently compute the mass spectrum. The third one constructs the excited states and fits their energy using the dispersion relation with selecting quantum numbers. Each method has its pros and cons, and we clarify such properties in their applications to the mass spectrum for the 2-flavor massive Schwinger model at $m/g=0.1$ and $θ=0$ using the density-matrix renormalization group (DMRG). We note that the multi-flavor Schwinger model at small mass $m$ is a strongly coupled field theory even after the bosonizations, and thus it deserves to perform the first-principles numerical calculations. All these methods mostly agree and identify the stable particles, pions $π_a$ ($J^{PG}=1^{-+}$), sigma meson $σ$ ($J^{PG}=0^{++}$), and eta meson $η$ ($J^{PG}=0^{--}$). In particular, we find that the mass of $σ$ meson is lighter than twice the pion mass, and thus $σ$ is stable against the decay process, $σ\to ππ$. This is consistent with the analytic prediction using the WKB approximation, and, remarkably, our numerical results are so close to the WKB-based formula between the pion and sigma-meson masses, $M_σ/M_π=\sqrt{3}$.
△ Less
Submitted 1 November, 2023; v1 submitted 31 July, 2023;
originally announced July 2023.
-
Programming Mechanics in Knitted Materials, Stitch by Stitch
Authors:
Krishma Singal,
Michael S. Dimitriyev,
Sarah E. Gonzalez,
Alexander P. Cachine,
Sam Quinn,
Elisabetta A. Matsumoto
Abstract:
Knitting turns yarn, a 1D material, into a 2D fabric that is flexible, durable [1], and can be patterned to adopt a wide range of 3D geometries [2]. Like other mechanical metamaterials [3], the elasticity of knitted fabrics is an emergent property of the local stitch topology and pattern that cannot solely be attributed to the yarn itself. Thus, knitting can be viewed as an additive manufacturing…
▽ More
Knitting turns yarn, a 1D material, into a 2D fabric that is flexible, durable [1], and can be patterned to adopt a wide range of 3D geometries [2]. Like other mechanical metamaterials [3], the elasticity of knitted fabrics is an emergent property of the local stitch topology and pattern that cannot solely be attributed to the yarn itself. Thus, knitting can be viewed as an additive manufacturing technique that allows for stitch-by-stitch programming of elastic properties and has applications in many fields ranging from soft robotics [4-6] and wearable electronics [7,8] to engineered tissue[9] and architected materials [10,11]. However, predicting these mechanical properties based on the stitch type remains elusive. Here we untangle the relationship between changes in stitch topology and emergent elasticity in several types of knitted fabrics. We combine experiment and simulation to construct a constitutive model for the nonlinear bulk response of these fabrics. This model serves as a basis for composite fabrics with bespoke mechanical properties, which crucially do not depend on the constituent yarn.
△ Less
Submitted 4 December, 2023; v1 submitted 26 February, 2023;
originally announced February 2023.
-
Towards Molecular Simulations that are Transparent, Reproducible, Usable By Others, and Extensible (TRUE)
Authors:
Matthew W. Thompson,
Justin B. Gilmer,
Ray A. Matsumoto,
Co D. Quach,
Parashara Shamaprasad,
Alexander H. Yang,
Christopher R. Iacovella,
Clare McCabe,
Peter T. Cummings
Abstract:
Systems composed of soft matter (e.g., liquids, polymers, foams, gels, colloids, and most biological materials) are ubiquitous in science and engineering, but molecular simulations of such systems pose particular computational challenges, requiring time and/or ensemble-averaged data to be collected over long simulation trajectories for property evaluation. Performing a molecular simulation of a so…
▽ More
Systems composed of soft matter (e.g., liquids, polymers, foams, gels, colloids, and most biological materials) are ubiquitous in science and engineering, but molecular simulations of such systems pose particular computational challenges, requiring time and/or ensemble-averaged data to be collected over long simulation trajectories for property evaluation. Performing a molecular simulation of a soft matter system involves multiple steps, which have traditionally been performed by researchers in a "bespoke" fashion, resulting in many published soft matter simulations not being reproducible based on the information provided in the publications. To address the issue of reproducibility and to provide tools for computational screening, we have been develo** the open-source Molecular Simulation and Design Framework (MoSDeF) software suite. In this paper, we propose a set of principles to create Transparent, Reproducible, Usable by others, and Extensible (TRUE) molecular simulations. MoSDeF facilitates the publication and dissemination of TRUE simulations by automating many of the critical steps in molecular simulation, thus enhancing their reproducibility. We provide several examples of TRUE molecular simulations: All of the steps involved in creating, running and extracting properties from the simulations are distributed on open-source platforms (within MoSDeF and on GitHub), thus meeting the definition of TRUE simulations.
△ Less
Submitted 5 March, 2020; v1 submitted 4 March, 2020;
originally announced March 2020.
-
Knotty knits are tangles on tori
Authors:
Shashank G Markande,
Elisabetta A Matsumoto
Abstract:
In this paper we outline a topological framework for constructing 2-periodic knitted stitches and an algebra for joining stitches together to form more complicated textiles. Our topological framework can be constructed from certain topological "moves" which correspond to "operations" that knitters make when they create a stitch. In knitting, unlike Jacquard weaves, a set of $n$ loops may be combin…
▽ More
In this paper we outline a topological framework for constructing 2-periodic knitted stitches and an algebra for joining stitches together to form more complicated textiles. Our topological framework can be constructed from certain topological "moves" which correspond to "operations" that knitters make when they create a stitch. In knitting, unlike Jacquard weaves, a set of $n$ loops may be combined in topologically nontrivial ways to create $n$ stitches that are not pairwise associated. We define a \emph{swatch} as a construction that allows for these knitable knots.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
A chiral family of triply-periodic minimal surfaces derived from the quartz network
Authors:
Shashank Ganesh Markande,
Matthias Saba,
Gerd Schroeder-Turk,
Elisabetta A. Matsumoto
Abstract:
We describe a new family of triply-periodic minimal surfaces with hexagonal symmetry, related to the quartz (qtz) and its dual (the qzd net). We provide a solution to the period problem and provide a parametrisation of these surfaces, that are not in the regular class, by the Weierstrass-Enneper formalism. We identified this analytical description of the surface by generating an area-minimising me…
▽ More
We describe a new family of triply-periodic minimal surfaces with hexagonal symmetry, related to the quartz (qtz) and its dual (the qzd net). We provide a solution to the period problem and provide a parametrisation of these surfaces, that are not in the regular class, by the Weierstrass-Enneper formalism. We identified this analytical description of the surface by generating an area-minimising mesh interface from a pair of dual graphs (qtz & qzd) using the generalised Voronoi construction of De Campo, Hyde and colleagues, followed by numerical identification of the flat point structure. This mechanism is not restricted to the specific pair of dual graphs, and should be applicable to a broader set of possible dual graph topologies and their corresponding minimal surfaces, if existent.
△ Less
Submitted 17 May, 2018;
originally announced May 2018.
-
Probing the $J_{eff}=0$ ground state and the Van Vleck paramagnetism of the Ir$^{5+}$ ions in the layered Sr$_2$Co$_{0.5}$Ir$_{0.5}$O$_4$
Authors:
S. Agrestini,
C. -Y. Kuo,
K. Chen,
Y. Utsumi,
D. Mikhailova,
A. Rogalev,
F. Wilhelm,
T. Förster,
A. Matsumoto,
T. Takayama,
H. Takagi,
M. W. Haverkort,
Z. Hu,
L. H. Tjeng
Abstract:
We report a combined experimental and theoretical x-ray magnetic circular dichroism (XMCD) spectroscopy study at the Ir-$L_{2,3}$ edges on the Ir$^{5+}$ ions of the layered hybrid solid state oxide Sr$_2$Co$_{0.5}$Ir$_{0.5}$O$_4$ with the K$_2$NiF$_4$ structure. From theoretical simulation of the experimental Ir-$L_{2,3}$ XMCD spectrum, we found a deviation from a pure $J_{eff}=0$ ground state wit…
▽ More
We report a combined experimental and theoretical x-ray magnetic circular dichroism (XMCD) spectroscopy study at the Ir-$L_{2,3}$ edges on the Ir$^{5+}$ ions of the layered hybrid solid state oxide Sr$_2$Co$_{0.5}$Ir$_{0.5}$O$_4$ with the K$_2$NiF$_4$ structure. From theoretical simulation of the experimental Ir-$L_{2,3}$ XMCD spectrum, we found a deviation from a pure $J_{eff}=0$ ground state with an anisotropic orbital-to-spin moment ratio ($L_x/2S_x$ = 0.43 and $L_z/2S_z$ = 0.78). This deviation is mainly due to multiplet interactions being not small compared to the cubic crystal field and due to the presence of a large tetragonal crystal field associated with the crystal structure. Nevertheless, our calculations show that the energy gap between the singlet ground state and the triplet excited state is still large and that the magnetic properties of the Ir$^{5+}$ ions can be well described in terms of singlet Van Vleck paramagnetism.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
Long-range interactions in the effective low energy Hamiltonian of Sr2IrO4: a core level resonant inelastic x-ray scattering study
Authors:
S. Agrestini,
C. -Y. Kuo,
M. Moretti Sala,
Z. Hu,
D. Kasinathan,
K. -T. Ko,
P. Glatzel,
M. Rossi,
J. -D. Cafun,
K. O. Kvashnina,
A. Matsumoto,
T. Takayama,
H. Takagi,
L. H. Tjeng,
M. W. Haverkort
Abstract:
We have investigated the electronic structure of Sr2IrO4 using core level resonant inelastic x-ray scattering. The experimental spectra can be well reproduced using ab initio density functional theory based multiplet ligand field theory calculations, thereby validating these calculations. We found that the low-energy, effective Ir t2g orbitals are practically degenerate in energy. We uncovered tha…
▽ More
We have investigated the electronic structure of Sr2IrO4 using core level resonant inelastic x-ray scattering. The experimental spectra can be well reproduced using ab initio density functional theory based multiplet ligand field theory calculations, thereby validating these calculations. We found that the low-energy, effective Ir t2g orbitals are practically degenerate in energy. We uncovered that covalency in Sr2IrO4, and generally in iridates, is very large with substantial oxygen ligand hole character in the Ir t2g Wannier orbitals. This has far reaching consequences, as not only the onsite crystal-field energies are determined by the long range crystal-structure, but, more significantly, magnetic exchange interactions will have long range distance dependent anisotropies in the spin direction. These findings set constraints and show pathways for the design of d^5 materials that can host compass-like magnetic interactions.
△ Less
Submitted 30 November, 2016;
originally announced December 2016.
-
Straight Round the Twist: Frustration and Chirality in Smectics-A
Authors:
Elisabetta A. Matsumoto,
Randall D. Kamien,
Gareth P. Alexander
Abstract:
Frustration is a powerful mechanism in condensed matter systems, driving both order and co plexity. In smectics, the frustration between macroscopic chirality and equally spaced layers generates textures characterised by a proliferation of defects. In this article, we study several different ground states of the chiral Landau-de Gennes free energy for a smectic liquid crystal. The standard theory…
▽ More
Frustration is a powerful mechanism in condensed matter systems, driving both order and co plexity. In smectics, the frustration between macroscopic chirality and equally spaced layers generates textures characterised by a proliferation of defects. In this article, we study several different ground states of the chiral Landau-de Gennes free energy for a smectic liquid crystal. The standard theory finds the twist grain boundary (TGB) phase to be the ground state for chiral type II smectics. However, for very highly chiral systems, the hierarchical helical nanofilament (HN) phase can form and is stable over the TGB.
△ Less
Submitted 11 November, 2016;
originally announced November 2016.
-
Model analysis of magnetic susceptibility of Sr$_2$IrO$_4$ - 2D $J_{\rm eff}$ = 1/2 Heisenberg system with competing interlayer couplings
Authors:
Tomohiro Takayama,
Akiyo Matsumoto,
George Jackeli,
Hidenori Takagi
Abstract:
We report the analysis of magnetic susceptibility $χ$($T$) of Sr$_2$IrO$_4$ single crystal in the paramagnetic phase. We formulate the theoretical susceptibility based on isotropic Heisenberg antiferromagnetism incorporating the Dzyaloshinsky-Moriya interaction exactly, and include the interlayer couplings in a mean-field approximation. $χ$($T$) above $T_{\rm N}$ was found to be well described by…
▽ More
We report the analysis of magnetic susceptibility $χ$($T$) of Sr$_2$IrO$_4$ single crystal in the paramagnetic phase. We formulate the theoretical susceptibility based on isotropic Heisenberg antiferromagnetism incorporating the Dzyaloshinsky-Moriya interaction exactly, and include the interlayer couplings in a mean-field approximation. $χ$($T$) above $T_{\rm N}$ was found to be well described by the model, indicating the predominant Heisenberg exchange consistent with the microscopic theory. The analysis points to a competition of nearest and next-nearest neighbor interlayer couplings, which results in the up-up-down-down configuration of the in-plane canting moments identified by the diffraction experiments.
△ Less
Submitted 22 August, 2016;
originally announced August 2016.
-
Optical anisotropy of the Jeff = 1/2 Mott insulator Sr2IrO4
Authors:
D. Pröpper,
A. N. Yaresko,
M. Höppner,
Y. Matiks,
Y. -L. Mathis,
T. Takayama,
A. Matsumoto,
H. Takagi,
B. Keimer,
A. V. Boris
Abstract:
We report the complex dielectric function along and perpendicular to the IrO2 planes in the layered perovskite Sr2IrO4 determined by spectroscopic ellipsometry in the spectral range from 12 meV to 6 eV. Thin high quality single crystals were stacked to measure the c-axis optical conductivity. In the phonon response we identified 10 infrared-active modes polarized within the basal plane and only fo…
▽ More
We report the complex dielectric function along and perpendicular to the IrO2 planes in the layered perovskite Sr2IrO4 determined by spectroscopic ellipsometry in the spectral range from 12 meV to 6 eV. Thin high quality single crystals were stacked to measure the c-axis optical conductivity. In the phonon response we identified 10 infrared-active modes polarized within the basal plane and only four modes polarized along the c-axis, in full agreement with first-principle lattice dynamics calculations. We also observed a strong optical anisotropy in the near-infrared spectra arising from direct transitions between Ir 5d t2g Jeff = 1/2 and Jeff = 3/2 bands, which transition probability is highly suppressed for light polarized along the c-axis. The spectra are analyzed and discussed in terms of relativistic LSDA+U band structure calculations.
△ Less
Submitted 19 February, 2016;
originally announced February 2016.
-
Pseudospin heat conductivity in the $J_\mathrm{eff} = 1/2$ antiferromagnet Sr$_2$IrO$_4$
Authors:
Frank Steckel,
Akiyo Matsumoto,
Tomohiro Takayama,
Hidenori Tagaki,
Bernd Büchner,
Christian Hess
Abstract:
We report the in-plane and out-of-plane heat conductivity of the antiferromagnetic spin-orbit induced Mott insulator Sr$_2$IrO$_4$ with $J_\mathrm{eff} = 1/2$. Our data reveal clear-cut evidence for magnetic heat transport within the IrO$_2$ planes which provides the unique possibility to analyze the thermal occupation and scattering of $J_\mathrm{eff} = 1/2$ pseudospin excitations. The analysis o…
▽ More
We report the in-plane and out-of-plane heat conductivity of the antiferromagnetic spin-orbit induced Mott insulator Sr$_2$IrO$_4$ with $J_\mathrm{eff} = 1/2$. Our data reveal clear-cut evidence for magnetic heat transport within the IrO$_2$ planes which provides the unique possibility to analyze the thermal occupation and scattering of $J_\mathrm{eff} = 1/2$ pseudospin excitations. The analysis of the magnetic heat conductivity yields a low-temperature ($T \lesssim 75$ K) magnetic mean free path $l_\mathrm{mag} \sim 32$ nm, consistent with boundary scattering. Upon heating towards room temperature, the mean free path strongly decreases by one order of magnitude due to thermally activated scattering of the pseudospin excitations. The latter reveals that the coupling of these excitations to the lattice is radically different from that of $S = 1/2$-excitations in cuprate analogs.
△ Less
Submitted 15 July, 2015;
originally announced July 2015.
-
Manipulating quantum channels in weak topological insulator nanoarchitectures
Authors:
Akihiko Matsumoto,
Takashi Arita,
Yositake Takane,
Yukinori Yoshimura,
Ken-Ichiro Imura
Abstract:
In $strong$ topological insulators protected surface states are always manifest, while in $weak$ topological insulators (WTI) the corresponding metallic surface states are either manifest or hidden, depending on the orientation of the surface. One can design a nanostep on the surface of WTI such that a protected helical channel appears along it. In a more generic WTI nanostructure, multiple sets o…
▽ More
In $strong$ topological insulators protected surface states are always manifest, while in $weak$ topological insulators (WTI) the corresponding metallic surface states are either manifest or hidden, depending on the orientation of the surface. One can design a nanostep on the surface of WTI such that a protected helical channel appears along it. In a more generic WTI nanostructure, multiple sets of such quasi-1D channels emerge and are coupled to each other. We study the response of the electronic spectrum associated with such quasi-1D surface modes against a magnetic flux piercing the system in the presence of disorder, and find a non-trivial, connected spectral flow as a clear signature indicating the immunity of the surface modes to disorder. We propose that the WTI nanoarchitecture is a promising platform for realizing topologically protected nanocircuits immune to disorder.
△ Less
Submitted 19 October, 2015; v1 submitted 12 December, 2014;
originally announced December 2014.
-
High transport Jc in magnetic fields up to 28 T of stainless steel/Ag double sheathed Ba122 tapes fabricated by scalable rolling process
Authors:
Zhaoshun Gao,
Kazumasa Togano,
Akiyoshi Matsumoto,
Hiroaki Kumakura
Abstract:
The recently discovered iron-based superconductors with very high upper critical field and small anisotropy have been regarded as a potential candidate material for high field applications. However, enhancements of superconducting properties are still needed to boost the successful use of iron-based superconductors in such applications. Here, we propose a new sheath architecture of stainless steel…
▽ More
The recently discovered iron-based superconductors with very high upper critical field and small anisotropy have been regarded as a potential candidate material for high field applications. However, enhancements of superconducting properties are still needed to boost the successful use of iron-based superconductors in such applications. Here, we propose a new sheath architecture of stainless steel (SS)/Ag double sheath and investigate its influence on the microstructures and Jc-H property. We found that the transport Jc-H curves for rolled and pressed tapes both show extremely small magnetic field dependence and exceed 3*10^4A/cm^2 under 28 T, which are much higher than those of low-temperature superconductors. More interestingly, 12 cm long rolled tape shows very high homogeneity and sustains Jc as high as 7.7*10^4 A/cm^2 at 10 T. These are the highest values reported so far for iron-based superconducting wires fabricated by scalable rolling process. The microstructure investigations indicate that such high Jc was achieved by higher density of the core and uniform deformation resulting better texturing. These results indicate that our process is very promising for fabricating long Ba122 wires for high field magnet, i.e. above 20 T.
△ Less
Submitted 4 December, 2014;
originally announced December 2014.
-
Low energy magnetic excitations in the spin-orbital Mott insulator Sr$_2$IrO$_4$
Authors:
S. Bahr,
A. Alfonsov,
G. Jackeli,
G. Khaliullin,
A. Matsumoto,
T. Takayama,
H. Takagi,
B. Büchner,
V. Kataev
Abstract:
We report a high-field electron spin resonance study in the sub-THz frequency domain of a single crystal of Sr$_2$IrO$_4$ that has been recently proposed as a prototypical spin-orbital Mott insulator. In the antiferromagnetically (AFM) ordered state with noncollinear spin structure that occurs in this material at $T_{\rm N} \approx 240$ K we observe both the "low" frequency mode due to the precess…
▽ More
We report a high-field electron spin resonance study in the sub-THz frequency domain of a single crystal of Sr$_2$IrO$_4$ that has been recently proposed as a prototypical spin-orbital Mott insulator. In the antiferromagnetically (AFM) ordered state with noncollinear spin structure that occurs in this material at $T_{\rm N} \approx 240$ K we observe both the "low" frequency mode due to the precession of weak ferromagnetic moments arising from a spin canting, and the "high" frequency modes due to the precession of the AFM sublattices. Surprisingly, the energy gap for the AFM excitations appears to be very small, amounting to 0.83 meV only. This suggests a rather isotropic Heisenberg dynamics of interacting Ir$^{4+}$ effective spins despite the spin-orbital entanglement in the ground state.
△ Less
Submitted 20 March, 2014; v1 submitted 17 December, 2013;
originally announced December 2013.
-
Fano Resonances in the Infrared Spectra of Phonons in Hyper-Kagome Na_3Ir_3O_8
Authors:
D. Pröpper,
A. N. Yaresko,
T. I. Larkin,
T. N. Stanislavchuk,
A. A. Sirenko,
T. Takayama,
A. Matsumoto,
H. Takagi,
B. Keimer,
A. V. Boris
Abstract:
We report the complex dielectric function of high-quality Na_3Ir_3O_8 single crystals determined by spectroscopic ellipsometry in the spectral range from 15 meV to 2 eV. The far-infrared phonon spectra exhibit highly asymmetric line shapes characteristic of Fano resonances. With decreasing temperature, we observe a sharp increase of the infrared intensity of the Fano-shaped phonon modes accompanie…
▽ More
We report the complex dielectric function of high-quality Na_3Ir_3O_8 single crystals determined by spectroscopic ellipsometry in the spectral range from 15 meV to 2 eV. The far-infrared phonon spectra exhibit highly asymmetric line shapes characteristic of Fano resonances. With decreasing temperature, we observe a sharp increase of the infrared intensity of the Fano-shaped phonon modes accompanied by concomitant changes in the low energy electronic background, formed by electronic transitions between Ir 5d t_2g bands of a mostly J_eff = 1/2 character. The role of the complex Hyper-Kagome lattice structure and strong spin-orbit coupling is considered.
△ Less
Submitted 13 November, 2013;
originally announced November 2013.
-
Spin-orbit coupling induced semi-metallic state in the 1/3 hole doped hyper-kagome Na3Ir3O8
Authors:
T. Takayama,
A. Matsumoto,
J. Nuss,
A. Yaresko,
K. Ishii,
M. Yoshida,
J. Mizuki,
H. Takagi
Abstract:
The complex iridium oxide Na3Ir3O8 with a B-site ordered spinel structure was synthesized in single crystalline form, where the chiral hyper-kagome lattice of Ir atoms, as observed in the spin-liquid candidate Na4Ir3O8, was identified. The average valence of Ir is 4.33+ and, therefore, Na3Ir3O8 can be viewed as a doped analogue of the hyper-kagome spin liquid with Ir4+. The transport measurements…
▽ More
The complex iridium oxide Na3Ir3O8 with a B-site ordered spinel structure was synthesized in single crystalline form, where the chiral hyper-kagome lattice of Ir atoms, as observed in the spin-liquid candidate Na4Ir3O8, was identified. The average valence of Ir is 4.33+ and, therefore, Na3Ir3O8 can be viewed as a doped analogue of the hyper-kagome spin liquid with Ir4+. The transport measurements showed that Na3Ir3O8 is in fact a semi-metal. The electronic structure calculation demonstrated that the strong spin-orbit coupling of Ir yields the semi-metallic state out of an otherwise band insulating state, which may harbor exotic topological effects embedded in the hyper-kagome lattice.
△ Less
Submitted 14 November, 2013; v1 submitted 12 November, 2013;
originally announced November 2013.
-
Achievement of practical level critical current densities in PIT Ba1-xKxFe2As2/Ag tapes by conventional cold mechanical deformation
Authors:
Zhaoshun Gao,
Kazumasa Togano,
Akiyoshi Matsumoto,
Hiroaki Kumakura
Abstract:
We found that transport critical current density (Jc) of the Ba1-xKxFe2As2/Ag tapes is significantly enhanced by the combination process of cold flat rolling and uniaxial pressing. At 4.2 K, the Jc reaches a high value of 9.1x104 A/cm2 in 4 T, which is almost the practical level of 105 A/cm2. The Jc-H curve shows extremely small magnetic field dependence and keeps a high value of 6.9x104 A/cm2 in…
▽ More
We found that transport critical current density (Jc) of the Ba1-xKxFe2As2/Ag tapes is significantly enhanced by the combination process of cold flat rolling and uniaxial pressing. At 4.2 K, the Jc reaches a high value of 9.1x104 A/cm2 in 4 T, which is almost the practical level of 105 A/cm2. The Jc-H curve shows extremely small magnetic field dependence and keeps a high value of 6.9x104 A/cm2 in 10 T. These are the highest values reported so far for iron based superconducting wires. We also show our successful attempts of the fabrication of multi-filamentary tapes. A high Jc value of 5.3x104 A/cm2 (4.2 K, 10 T) was obtained in seven-filamentary tapes. The hardness and microstructure investigations reveal that the superior Jc in uniaxial pressed tape samples is due to the high core density, more textured grains and the change of microcrack structure. These results indicate that iron based superconductors are promising for high magnetic field applications.
△ Less
Submitted 17 October, 2013;
originally announced October 2013.
-
Perfectly conducting channel on the dark surface of weak topological insulators
Authors:
Yukinori Yoshimura,
Akihiko Matsumoto,
Yositake Takane,
Ken-Ichiro Imura
Abstract:
A weak topological insulator (WTI) bears, generally, an even number of Dirac cones on its surface; they are susceptible of doubling, while on the surface of a certain orientation it shows no Dirac cone. On this "dark" surface of a WTI, we predict the existence of a single pair of isolated 1D perfectly conducting channels that forms either a closed loop or a segment of a line. The former is associa…
▽ More
A weak topological insulator (WTI) bears, generally, an even number of Dirac cones on its surface; they are susceptible of doubling, while on the surface of a certain orientation it shows no Dirac cone. On this "dark" surface of a WTI, we predict the existence of a single pair of isolated 1D perfectly conducting channels that forms either a closed loop or a segment of a line. The former is associated typically with a single atomic-layer-thick island formed on the dark surface, while the latter is shown to be the consequence of a pair of crystal (screw) dislocations terminating on the dark surface.
△ Less
Submitted 4 March, 2013;
originally announced March 2013.
-
Large transport critical currents and magneto-optical imaging of textured Sr1-xKxFe2As2 superconducting tapes
Authors:
Yanwei Ma,
Chao Yao,
** Zhang,
He Lin,
Dongliang Wang,
A. Matsumoto,
H. Kumakura,
Y. Tsuchiya,
Y. Sun,
T. Tamegai
Abstract:
We report the temperature dependence of the transport critical current density (Jc) in textured Sr1-xKxFe2As2/Fe (Sr122) tapes fabricated by an ex situ powder-in-tube process. Critical currents were measured in magnetic fields up to 0-15 T and/or the temperature range 4.2-30 K by using a dc four-probe method. It was found that textured Sr122 tapes heat-treated at low temperatures showed higher tra…
▽ More
We report the temperature dependence of the transport critical current density (Jc) in textured Sr1-xKxFe2As2/Fe (Sr122) tapes fabricated by an ex situ powder-in-tube process. Critical currents were measured in magnetic fields up to 0-15 T and/or the temperature range 4.2-30 K by using a dc four-probe method. It was found that textured Sr122 tapes heat-treated at low temperatures showed higher transport Jc performance due to much improved intergrain connections. At temperatures of 20 K, easily obtained using a cryocooler, Jc reached ~ 10^4 A/cm^2 in self field, which is the highest transport value of ferropnictide wires and tapes reported so far. Magneto-optical imaging observations further revealed significant and well distributed global Jc at 20 K in our tapes. These results demonstrate that 122 type superconducting tapes are promising for high-field applications at around 20 K.
△ Less
Submitted 20 February, 2013;
originally announced February 2013.
-
Enhanced high-field transport critical current densities observed for the ex-situ PIT processed Ag/(Ba,K)Fe2As2 thin tapes
Authors:
K. Togano,
Z. S. Gao,
H. Taira,
S. Ishida,
K. Kihou,
A. Iyo,
H. Eisaki,
A. Matsumoto,
H. Kumakura
Abstract:
We found that the transport Jc of the ex-situ PIT processed (Ba,K)Fe2As2 (Ba-122) wire with single Ag sheath can be significantly enhanced by repeating the combined process of rolling and heat treatment. The transport Jc (4.2 K and 10 T) of 4.4 x 103 A/cm2 (Ic =15.7 A) was obtained for a thin tape of 0.3 mm in thickness, which is the highest value reported so far for the PIT processed 122 wires an…
▽ More
We found that the transport Jc of the ex-situ PIT processed (Ba,K)Fe2As2 (Ba-122) wire with single Ag sheath can be significantly enhanced by repeating the combined process of rolling and heat treatment. The transport Jc (4.2 K and 10 T) of 4.4 x 103 A/cm2 (Ic =15.7 A) was obtained for a thin tape of 0.3 mm in thickness, which is the highest value reported so far for the PIT processed 122 wires and tapes with a Ag sheath and processed by a conventional route. The measurement by a hybrid magnet showed that Jc-H curve maintains very small field dependence up to the strong magnetic field of 28 T as expected from the previously reported high Hc2 value. The core of the thin tape shows dense grain structure with less cracks and voids and indicates the development of c-axis alignment, although it is still incomplete. The researches to elucidate the origin of Jc enhancement and to have further improvement of transport Jc are now ongoing. The process is simple using a Ag single sheath and, therefore, more realistic technique for long length wire production.
△ Less
Submitted 3 February, 2013;
originally announced February 2013.
-
Patterns on a Roll: A Method for Continuous Feed Nanoprinting
Authors:
Elisabetta A. Matsumoto,
Randall D. Kamien
Abstract:
Exploiting elastic instability in thin films has proven a robust method for creating complex patterns and structures across a wide range of lengthscales. Even the simplest of systems, an elastic membrane with a lattice of pores, under mechanical strain, generates complex patterns featuring long-range orientational order. When we promote this system to a curved surface, in particular, a cylindrical…
▽ More
Exploiting elastic instability in thin films has proven a robust method for creating complex patterns and structures across a wide range of lengthscales. Even the simplest of systems, an elastic membrane with a lattice of pores, under mechanical strain, generates complex patterns featuring long-range orientational order. When we promote this system to a curved surface, in particular, a cylindrical membrane, a novel set of features, patterns and broken symmetries appears. The newfound periodicity of the cylinder allows for a novel continuous method for nanoprinting.
△ Less
Submitted 3 July, 2012;
originally announced July 2012.
-
Smectic Pores and Defect Cores
Authors:
Elisabetta A. Matsumoto,
Christian D. Santangelo,
Randall D. Kamien
Abstract:
Riemann's minimal surfaces are a complete, embeddable, one-parameter family of minimal surfaces with translational symmetry along one direction. It's infinite number of planar ends are joined together by an array of necks, closely matching the morphology of a bicontinuous, lamellar system with pores connecting alternating layers. We demonstrate explicitly that Riemann's minimal surfaces are compos…
▽ More
Riemann's minimal surfaces are a complete, embeddable, one-parameter family of minimal surfaces with translational symmetry along one direction. It's infinite number of planar ends are joined together by an array of necks, closely matching the morphology of a bicontinuous, lamellar system with pores connecting alternating layers. We demonstrate explicitly that Riemann's minimal surfaces are composed of a nonlinear sum of two oppositely-handed helicoids. This description is particularly appropriate for describing smectic liquid crystals containing two screw dislocations.
△ Less
Submitted 4 October, 2011;
originally announced October 2011.
-
Disclination Loops, Hedgehogs, and All That
Authors:
Gareth P. Alexander,
Bryan Gin-ge Chen,
Elisabetta A. Matsumoto,
Randall D. Kamien
Abstract:
The homotopy theory of topological defects is a powerful tool for organizing and unifying many ideas across a broad range of physical systems. Recently, experimental progress has been made in controlling and measuring colloidal inclusions in liquid crystalline phases. The topological structure of these systems is quite rich but, at the same time, subtle. Motivated by experiment and the power of to…
▽ More
The homotopy theory of topological defects is a powerful tool for organizing and unifying many ideas across a broad range of physical systems. Recently, experimental progress has been made in controlling and measuring colloidal inclusions in liquid crystalline phases. The topological structure of these systems is quite rich but, at the same time, subtle. Motivated by experiment and the power of topological reasoning, we review and expound upon the classification of defects in uniaxial nematic liquid crystals. Particular attention is paid to the ambiguities that arise in these systems, which have no counterpart in the much-storied XY model or the Heisenberg ferromagnet.
△ Less
Submitted 6 July, 2011;
originally announced July 2011.
-
Large Transport Critical Current Densities of Ag Sheathed (Ba,K)Fe2As2+Ag Superconducting Wires Fabricated by an ex-situ Powder-in-Tube (PIT) Process
Authors:
Kazumasa Togano,
Akiyoshi Matsumoto,
Hiroaki Kumakura
Abstract:
We report large transport critical current densities observed in Ag-added (Ba,K)Fe2As2 superconducting wires prepared by an ex-situ powder-in-tube (PIT) process. The wire has a simple composite structure sheathed only by Ag. A precursor bulk material prepared by a melting process was ground into powder and put into a Ag tube. The composite was then cold worked into a wire and heat treated at 850…
▽ More
We report large transport critical current densities observed in Ag-added (Ba,K)Fe2As2 superconducting wires prepared by an ex-situ powder-in-tube (PIT) process. The wire has a simple composite structure sheathed only by Ag. A precursor bulk material prepared by a melting process was ground into powder and put into a Ag tube. The composite was then cold worked into a wire and heat treated at 850$^\circ$C for sintering. Transport critical current densities, Jc, at 4.2 K are 1.0\times104 A/cm2 (Ic = 60.7 A) in self field and 1.1\times103 A/cm2 (Ic = 6.6 A) in 10 T. These are the highest values reported so far for the Fe-based superconducting wires.
△ Less
Submitted 9 March, 2011;
originally announced March 2011.
-
The Power of Poincaré: Elucidating the Hidden Symmetries in Focal Conic Domains
Authors:
Gareth P. Alexander,
Bryan Gin-ge Chen,
Elisabetta A. Matsumoto,
Randall D. Kamien
Abstract:
Focal conic domains are typically the "smoking gun" by which smectic liquid crystalline phases are identified. The geometry of the equally-spaced smectic layers is highly generic but, at the same time, difficult to work with. In this Letter we develop an approach to the study of focal sets in smectics which exploits a hidden Poincaré symmetry revealed only by viewing the smectic layers as projec…
▽ More
Focal conic domains are typically the "smoking gun" by which smectic liquid crystalline phases are identified. The geometry of the equally-spaced smectic layers is highly generic but, at the same time, difficult to work with. In this Letter we develop an approach to the study of focal sets in smectics which exploits a hidden Poincaré symmetry revealed only by viewing the smectic layers as projections from one-higher dimension. We use this perspective to shed light upon several classic focal conic textures, including the concentric cyclides of Dupin, polygonal textures and tilt-grain boundaries.
△ Less
Submitted 3 April, 2010;
originally announced April 2010.
-
Helical Nanofilaments and the High Chirality Limit of Smectics-A
Authors:
Elisabetta A. Matsumoto,
Gareth P. Alexander,
Randall D. Kamien
Abstract:
Liquid crystalline systems exhibiting both macroscopic chirality and smectic order experience frustration resulting in mesophases possessing complex three-dimensional order. In the twist-grain-boundary phase, defect lattices mediate the propagation of twist throughout the system. We propose a new chiral smectic structure composed of a lattice of chiral bundles as a model of the helical nanofilam…
▽ More
Liquid crystalline systems exhibiting both macroscopic chirality and smectic order experience frustration resulting in mesophases possessing complex three-dimensional order. In the twist-grain-boundary phase, defect lattices mediate the propagation of twist throughout the system. We propose a new chiral smectic structure composed of a lattice of chiral bundles as a model of the helical nanofilament (B4) phase of bent core smectics.
△ Less
Submitted 18 September, 2009;
originally announced September 2009.
-
Elastic Instability Triggered Pattern Formation
Authors:
Elisabetta A. Matsumoto,
Randall D. Kamien
Abstract:
Recent experiments have exploited elastic instabilities in membranes to create complex patterns. However, the rational design of such structures poses many challenges, as they are products of nonlinear elastic behavior. We pose a simple model for determining the orientational order of such patterns using only linear elasticity theory which correctly predicts the outcomes of several experiments.…
▽ More
Recent experiments have exploited elastic instabilities in membranes to create complex patterns. However, the rational design of such structures poses many challenges, as they are products of nonlinear elastic behavior. We pose a simple model for determining the orientational order of such patterns using only linear elasticity theory which correctly predicts the outcomes of several experiments. Each element of the pattern is modeled by a "dislocation dipole" located at a point on a lattice, which then interacts elastically with all other dipoles in the system. We explicitly consider a membrane with a square lattice of circular holes under uniform compression and examine the changes in morphology as it is allowed to relax in a specified direction.
△ Less
Submitted 20 February, 2009;
originally announced February 2009.
-
Fabrication of high performance MgB2 wires by an internal Mg diffusion process
Authors:
J. M. Hur,
K. Togano,
A. Matsumoto,
H. Kumakura,
H. Wada,
K. Kimura
Abstract:
We succeeded in the fabrication of high-Jc MgB2/Fe wires applying the internal Mg diffusion (IMD) process with pure Mg core and SiC addition. A pure Mg rod with 2 mm diameter was placed at the center of a Fe tube, and the space between Mg and Fe tube was filled with B powder or the powder mixture of B-(5mol%)SiC. The composite was cold worked into 1.2mm diameter wire and finally heat treated at…
▽ More
We succeeded in the fabrication of high-Jc MgB2/Fe wires applying the internal Mg diffusion (IMD) process with pure Mg core and SiC addition. A pure Mg rod with 2 mm diameter was placed at the center of a Fe tube, and the space between Mg and Fe tube was filled with B powder or the powder mixture of B-(5mol%)SiC. The composite was cold worked into 1.2mm diameter wire and finally heat treated at temperatures above the melting point of Mg(~650oC). During the heat treatment liquid Mg infiltrated into B layer and reacted with B to form MgB2. X-ray diffraction analysis indicated that the major phase in the reacted layer is MgB2. SEM analysis shows that the density of MgB2 layer is higher than that of usual powder-in-tube(PIT) processed wires. The wires with 5mol% SiC addition heat treated at 670oC showed Jc values higher than 105A/cm2 in 8T and 41,000A/cm2 in 10T at 4.2K. These values are much higher than those of usual PIT processed wires even compared to the ones with SiC addition. Higher density of MgB2 layer obtained by the diffusion reaction is the major cause of this excellent Jc values.
△ Less
Submitted 13 December, 2007;
originally announced December 2007.
-
Molecular formations in ultracold mixtures of interacting and noninteracting atomic gases
Authors:
T. Nishimura,
A. Matsumoto,
H. Yabu
Abstract:
Atom-molecule equilibrium for molecular formation processes is discussed for boson-fermion, fermion-fermion, and boson-boson mixtures of ultracold atomic gases in the framework of quasichemical equilibrium theory. After presentation of the general formulation, zero-temperature phase diagrams of the atom-molecule equilibrium states are calculated analytically; molecular, mixed, and dissociated ph…
▽ More
Atom-molecule equilibrium for molecular formation processes is discussed for boson-fermion, fermion-fermion, and boson-boson mixtures of ultracold atomic gases in the framework of quasichemical equilibrium theory. After presentation of the general formulation, zero-temperature phase diagrams of the atom-molecule equilibrium states are calculated analytically; molecular, mixed, and dissociated phases are shown to appear for the change of the binding energy of the molecules. The temperature dependences of the atom or molecule densities are calculated numerically, and finite-temperature phase structures are obtained of the atom-molecule equilibrium in the mixtures. The transition temperatures of the atom or molecule Bose-Einstein condensations are also evaluated from these results. Quantum-statistical deviations of the law of mass action in atom-molecule equilibrium, which should be satisfied in mixtures of classical Maxwell-Boltzmann gases, are calculated, and the difference in the different types of quantum-statistical effects is clarified. Mean-field calculations with interparticle interactions (atom-atom, atom-molecule, and molecule-molecule) are formulated, where interaction effects are found to give the linear density-dependent term in the effective molecular binding energies. This method is applied to calculations of zero-temperature phase diagrams, where new phases with coexisting local-equilibrium states are shown to appear in the case of strongly repulsive interactions.
△ Less
Submitted 6 August, 2008; v1 submitted 31 October, 2007;
originally announced October 2007.
-
Improvement of critical current density in Fe-sheathed MgB2 tapes by ZrSi2, ZrB2 and WSi2 do**
Authors:
Yanwei Ma,
H. Kumakura,
A. Matsumoto,
H. Hatakeyama,
K. Togano
Abstract:
Fe-sheathed MgB2 tapes were prepared through the in situ powder-in-tube technique by 5 at.% ZrSi2, ZrB2 and WSi2 do**, respectively. The do** effect of these compounds on the microstructure and superconducting properties of MgB2 tapes has been investigated by using x-ray diffraction, scanning electron microscope, transport measurements and DC susceptibility measurements. Compared to the undo…
▽ More
Fe-sheathed MgB2 tapes were prepared through the in situ powder-in-tube technique by 5 at.% ZrSi2, ZrB2 and WSi2 do**, respectively. The do** effect of these compounds on the microstructure and superconducting properties of MgB2 tapes has been investigated by using x-ray diffraction, scanning electron microscope, transport measurements and DC susceptibility measurements. Compared to the undoped samples, Jc for all the doped samples were much improved; the best result in terms of Jc was achieved for ZrSi2 do**, by up to a factor of 3.4 at 4.2 K in magnetic fields up to 12 T. Moreover, these dopants did not significantly decrease the transition temperature. The Jc-B curves of WSi2-doped tapes show better performance in higher magnetic fields in comparison to undoped tapes, suggesting that pinning centers effective in a high-field region were possibly introduced.
△ Less
Submitted 25 June, 2003;
originally announced June 2003.
-
High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes
Authors:
H. Kumakura,
A. Matsumoto,
H. Fujii,
K. Togano
Abstract:
MgB2 tapes and wires were fabricated by the Powder-In-Tube method. Stainless steel and Cu-Ni tubes were used as sheath materials, and no heat treatment was applied. The tapes made of stainless steel showed transport critical current density Jc of about 10,000A/cm2 at 4.2K and 5T. A high Jc of about 300,000A/cm2 was obtained by extrapolating the Jc-B curves to zero field. Multifilamentary(7-core)…
▽ More
MgB2 tapes and wires were fabricated by the Powder-In-Tube method. Stainless steel and Cu-Ni tubes were used as sheath materials, and no heat treatment was applied. The tapes made of stainless steel showed transport critical current density Jc of about 10,000A/cm2 at 4.2K and 5T. A high Jc of about 300,000A/cm2 was obtained by extrapolating the Jc-B curves to zero field. Multifilamentary(7-core) MgB2 wire was successfully fabricated using Cu-Ni tubes. For both tapes and wires the grain connectivity of MgB2 was as good as a high-pressure sintered bulk sample. However, the Jc of the Cu-Ni sheathed wire was lower than the stainless steel sheathed tape due to the lower packing density of MgB2.
△ Less
Submitted 1 June, 2001;
originally announced June 2001.