-
Unveiling the impact of crosslinking redox-active polymers on their electrochemical behavior by 3D imaging and statistical microstructure analysis
Authors:
Marten Ademmer,
Po-Hua Su,
Lukas Dodell,
Jakob Asenbauer,
Markus Osenberg,
André Hilger,
Jeng-Kuei Chang,
Ingo Manke,
Matthias Neumann,
Volker Schmidt,
Dominic Bresser
Abstract:
Polymer-based batteries offer potentially higher power densities and a smaller ecological footprint compared to state-of-the-art lithium-ion batteries comprising inorganic active materials. However, in order to benefit from this potential advantages, further research to find suitable material compositions is required. In the present paper, we compare two different electrode composites of poly(2,2,…
▽ More
Polymer-based batteries offer potentially higher power densities and a smaller ecological footprint compared to state-of-the-art lithium-ion batteries comprising inorganic active materials. However, in order to benefit from this potential advantages, further research to find suitable material compositions is required. In the present paper, we compare two different electrode composites of poly(2,2,6,6-tetramethylpiperidinyloxy-4-ylmethacrylate) (PTMA) and CMK-8, one produced with and one without crosslinking the PTMA. The influence of both approaches on the corresponding electrodes is comparatively investigated using electrochemical measurements and statistical 3D microstructure analysis based on synchrotron X-ray tomography. A particular focus is put on the local heterogeneity in the coating and how the crosslinking influences the interaction between PTMA and CMK-8. It is shown that crosslinked PTMA--compared to its non-crosslinked counterpart--exhibits a more heterogeneous microstructure and, furthermore, leads to better surface coverage of CMK-8, larger pores and shorter transportation pathways through the latter. These changes improve the electrochemical properties of the electrode.
△ Less
Submitted 21 June, 2023;
originally announced June 2023.
-
Roadmap for focused ion beam technologies
Authors:
Katja Höflich,
Gerhard Hobler,
Frances I. Allen,
Tom Wirtz,
Gemma Rius,
Lisa McElwee-White,
Arkady V. Krasheninnikov,
Matthias Schmidt,
Ivo Utke,
Nico Klingner,
Markus Osenberg,
Rosa Córdoba,
Flyura Djurabekova,
Ingo Manke,
Philip Moll,
Mariachiara Manoccio,
José Marıa De Teresa,
Lothar Bischoff,
Johann Michler,
Olivier De Castro,
Anne Delobbe,
Peter Dunne,
Oleksandr V. Dobrovolskiy,
Natalie Frese,
Armin Gölzhäuser
, et al. (7 additional authors not shown)
Abstract:
The focused ion beam (FIB) is a powerful tool for the fabrication, modification and characterization of materials down to the nanoscale. Starting with the gallium FIB, which was originally intended for photomask repair in the semiconductor industry, there are now many different types of FIB that are commercially available. These instruments use a range of ion species and are applied broadly in mat…
▽ More
The focused ion beam (FIB) is a powerful tool for the fabrication, modification and characterization of materials down to the nanoscale. Starting with the gallium FIB, which was originally intended for photomask repair in the semiconductor industry, there are now many different types of FIB that are commercially available. These instruments use a range of ion species and are applied broadly in materials science, physics, chemistry, biology, medicine, and even archaeology. The goal of this roadmap is to provide an overview of FIB instrumentation, theory, techniques and applications. By viewing FIB developments through the lens of the various research communities, we aim to identify future pathways for ion source and instrumentation development as well as emerging applications, and the scope for improved understanding of the complex interplay of ion-solid interactions. We intend to provide a guide for all scientists in the field that identifies common research interests and will support future fruitful interactions connecting tool development, experiment and theory. While a comprehensive overview of the field is sought, it is not possible to cover all research related to FIB technologies in detail. We give examples of specific projects within the broader context, referencing original works and previous review articles throughout.
△ Less
Submitted 6 October, 2023; v1 submitted 31 May, 2023;
originally announced May 2023.
-
Quantitative comparison of different approaches for reconstructing the carbon-binder domain from tomographic image data of cathodes in lithium-ion batteries and its influence on electrochemical properties
Authors:
Benedikt Prifling,
Matthias Neumann,
Simon Hein,
Timo Danner,
Emanuel Heider,
Alice Hoffmann,
Philipp Rieder,
André Hilger,
Markus Osenberg,
Ingo Manke,
Margret Wohlfahrt-Mehrens,
Arnulf Latz,
Volker Schmidt
Abstract:
It is well known that the spatial distribution of the carbon-binder domain (CBD) offers a large potential to further optimize lithium-ion batteries. However, it is challenging to reconstruct the CBD from tomographic image data obtained by synchrotron tomography. In the present paper, we consider several approaches to segment 3D image data of two different cathodes into three phases, namely active…
▽ More
It is well known that the spatial distribution of the carbon-binder domain (CBD) offers a large potential to further optimize lithium-ion batteries. However, it is challenging to reconstruct the CBD from tomographic image data obtained by synchrotron tomography. In the present paper, we consider several approaches to segment 3D image data of two different cathodes into three phases, namely active material, CBD and pores. More precisely, we focus on global thresholding, a local closing approach based on EDX data, a k-means clustering method, and a procedure based on a neural network that has been trained by correlative microscopy, i.e., based on data gained by synchrotron tomography and FIB-SEM data representing the same electrode. We quantify the impact of the considered segmentation approaches on morphological characteristics as well as on the resulting performance by spatially-resolved transport simulations. Furthermore, we use experimentally determined electrochemical properties to identify an appropriate range for the effective transport parameter of the CBD. The developed methodology is applied to two differently manufactured cathodes, namely an ultra-thick unstructured cathode and a two-layer cathode with varying CBD content in both layers. This comparison elucidates the impact of a specific structuring concept on the 3D microstructure of cathodes.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Classification of FIB/SEM-tomography images for highly porous multiphase materials using random forest classifiers
Authors:
Markus Osenberg,
André Hilger,
Matthias Neumann,
Amalia Wagner,
Nicole Bohn,
Joachim R. Binder,
Volker Schmidt,
John Banhart,
Ingo Manke
Abstract:
FIB/SEM tomography represents an indispensable tool for the characterization of three-dimensional nanostructures in battery research and many other fields. However, contrast and 3D classification/reconstruction problems occur in many cases, which strongly limits the applicability of the technique especially on porous materials, like those used for electrode materials in batteries or fuel cells. Di…
▽ More
FIB/SEM tomography represents an indispensable tool for the characterization of three-dimensional nanostructures in battery research and many other fields. However, contrast and 3D classification/reconstruction problems occur in many cases, which strongly limits the applicability of the technique especially on porous materials, like those used for electrode materials in batteries or fuel cells. Distinguishing the different components like active Li storage particles and carbon/binder materials is difficult and often prevents a reliable quantitative analysis of image data, or may even lead to wrong conclusions about structure-property relationships. In this contribution, we present a novel approach for data classification in three-dimensional image data obtained by FIB/SEM tomography and its applications to NMC battery electrode materials. We use two different image signals, namely the signal of the angled SE2 chamber detector and the Inlens detector signal, combine both signals and train a random forest, i.e. a particular machine learning algorithm. We demonstrate that this approach can overcome current limitations of existing techniques suitable for multi-phase measurements and that it allows for quantitative data reconstruction even where current state-of the art techniques fail, or demand for large training sets. This approach may yield as guideline for future research using FIB/SEM tomography.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Understanding the degradation of a model Si-anode in Li-ion battery at the atomic-scale
Authors:
Se-Ho Kim,
Kang Dong,
Huan Zhao,
Ayman A. El-Zoka,
Xuyang Zhou,
Eric V. Woods,
Finn Giuliani,
Ingo Manke,
Dierk Raabe,
Baptiste Gault
Abstract:
Si-anodes have long been candidates thanks to an expected ten-fold increase in capacity compared to graphite. However, details of the mechanisms governing their degradation remain elusive, hindering science-guided development of long-lived Si-based anodes. Here we demonstrate how the latest developments in cryo-atom probe tomography enable the in-depth analysis of the electrode and electrolyte, an…
▽ More
Si-anodes have long been candidates thanks to an expected ten-fold increase in capacity compared to graphite. However, details of the mechanisms governing their degradation remain elusive, hindering science-guided development of long-lived Si-based anodes. Here we demonstrate how the latest developments in cryo-atom probe tomography enable the in-depth analysis of the electrode and electrolyte, and their interface at atomic-level.
△ Less
Submitted 17 July, 2022;
originally announced July 2022.
-
Non-destructive characterisation of dopant spatial distribution in cuprate superconductors
Authors:
A. -E. Tutueanu,
M. Sales,
K. L. Eliasen,
M. -E. Lacatusu,
J. -C. Grivel,
N. Kardjilov,
I. Manke,
M. Krzyzagorski,
Y. Sassa,
M. S. Andersson,
S. Schmidt,
K. Lefmann
Abstract:
Proper characterisation of investigated samples is vital when studying superconductivity as impurities and do** inhomogeneities can affect the physical properties of the measured system. We present a method where a polarised neutron imaging setup utilises the precession of spin-polarised neutrons in the presence of a trapped field in the superconducting sample to spatially map out the critical t…
▽ More
Proper characterisation of investigated samples is vital when studying superconductivity as impurities and do** inhomogeneities can affect the physical properties of the measured system. We present a method where a polarised neutron imaging setup utilises the precession of spin-polarised neutrons in the presence of a trapped field in the superconducting sample to spatially map out the critical temperature for the phase transition between superconducting and non-superconducting states. We demonstrate this method on a superconducting crystal of the prototypical high-temperature superconductor (La,Sr)$_2$CuO$_4$. The results, which are backed up by complementary magnetic susceptibility measurements, show that the method is able to resolve minor variations in the transition temperature across the length of the LSCO crystal, caused by inhomogeneities in strontium do**.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Characterization of the 3D microstructure of Ibuprofen tablets by means of synchrotron tomography
Authors:
Matthias Neumann,
Ramon Cabiscol,
Markus Osenberg,
Henning Markötter,
Ingo Manke,
Jan-Henrik Finke,
Volker Schmidt
Abstract:
We present a methodology to characterize the 3D microstructure of Ibuprofen tablets, which strongly influences the strength and solubility kinetics of the final formulation, by means of synchrotron tomography. A physically coherent trinarization for greyscale images of Ibuprofen tablets consisting of the three phases microcrystalline cellulose, Ibuprofen and pores is presented. For this purpose, a…
▽ More
We present a methodology to characterize the 3D microstructure of Ibuprofen tablets, which strongly influences the strength and solubility kinetics of the final formulation, by means of synchrotron tomography. A physically coherent trinarization for greyscale images of Ibuprofen tablets consisting of the three phases microcrystalline cellulose, Ibuprofen and pores is presented. For this purpose, a hybrid approach is developed combining a trinarization by means of statistical learning with a trinarization based on a watershed algorithm. This hybrid approach allows us to compute microstructure characteristics of tablets using image analysis. A comparison with experimental results shows that there is a significant amount of pores which is below the resolution limit and results from image analysis let us conjecture that these pores make up the major part of the surface between pores and solid. Furthermore, we compute microstructure characteristics, which are experimentally not accessible such as local percolation probabilities and chord length distribution functions. Both characteristics are meaningful in order to quantify the influence of tablet compaction on its microstructure. The presented approach can be used to get better insights into the relationship between production parameters and microstructure characteristics based on 3D image data of Ibuprofen tablets manufactured under different conditions.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Stochastic model for the 3D microstructure of pristine and cyclically aged cathodes in Li-ion batteries
Authors:
Klaus Kuchler,
Daniel Westhoff,
Julian Feinauer,
Tim Mitsch,
Ingo Manke,
Volker Schmidt
Abstract:
It is well-known that the microstructure of electrodes in lithium-ion batteries strongly affects their performance. Vice versa, the microstructure can exhibit strong changes during the usage of the battery due to aging effects. For a better understanding of these effects, mathematical analysis and modeling has turned out to be of great help. In particular, stochastic 3D microstructure models have…
▽ More
It is well-known that the microstructure of electrodes in lithium-ion batteries strongly affects their performance. Vice versa, the microstructure can exhibit strong changes during the usage of the battery due to aging effects. For a better understanding of these effects, mathematical analysis and modeling has turned out to be of great help. In particular, stochastic 3D microstructure models have proven to be a powerful and very flexible tool to generate various kinds of particle-based structures. Recently, such models have been proposed for the microstructure of anodes in lithium-ion energy and power cells. In the present paper, we describe a stochastic modeling approach for the 3D microstructure of cathodes in a lithium-ion energy cell, which differs significantly from the one observed in anodes. The model for the cathode data enhances the ideas of the anode models, which have been developed so far. It is calibrated using 3D tomographic image data from pristine as well as two aged cathodes. A validation based on morphological image characteristics shows that the model is able to realistically describe both, the microstructure of pristine and aged cathodes. Thus, we conclude that the model is suitable to generate virtual, but realistic microstructures of lithium-ion cathodes.
△ Less
Submitted 12 January, 2018; v1 submitted 4 October, 2017;
originally announced October 2017.