-
On the coupling of magnetic moments to superconducting quantum interference devices
Authors:
J. Linek,
M. Wyszynski,
B. Müller,
D. Korinski,
M. V. Milošević,
R. Kleiner,
D. Koelle
Abstract:
We investigate the coupling factor $φ_μ$ that quantifies the magnetic flux $Φ$ per magnetic moment $μ$ of a point-like magnetic dipole that couples to a superconducting quantum interference device (SQUID). Representing the dipole by a current-carrying loop, the reciprocity of mutual inductances of SQUID and loop provides a way of calculating $φ_μ(\vec{r}, \vec{e}_μ)$ vs.~position $\vec{r}$ and ori…
▽ More
We investigate the coupling factor $φ_μ$ that quantifies the magnetic flux $Φ$ per magnetic moment $μ$ of a point-like magnetic dipole that couples to a superconducting quantum interference device (SQUID). Representing the dipole by a current-carrying loop, the reciprocity of mutual inductances of SQUID and loop provides a way of calculating $φ_μ(\vec{r}, \vec{e}_μ)$ vs.~position $\vec{r}$ and orientation $\vec{e}_μ$ of the dipole anywhere in space from the magnetic field $B(\vec{r})$ produced by a supercurrent circulating in the SQUID loop. We use numerical simulations based on London and Ginzburg-Landau theory to calculate $φ_μ$ from the supercurrent density distributions in various SQUID geometries. We treat the far-field regime ($r\gtrsim a=$ inner size of the SQUID loop) with the dipole placed on the symmetry axis of circular or square shaped loops. We compare expressions for $φ_μ$ from filamentary loop models with simulation results for loops with finite width $w$ (outer size $A>a$), thickness $d$ and London penetration depth $λ_L$ and show that for thin ($d\ll a$) and narrow ($w < a$) loops the introduction of an effective loop size $a_{\rm eff}$ in the filamentary loop-model expressions results in agreement with simulations. For a dipole placed in the center of the loop, simulations provide an expression $φ_μ(a,A,d,λ_L)$ that covers a wide parameter range. In the near-field regime (dipole centered at small distance $z$ above one SQUID arm) only coupling to a single strip representing the SQUID arm has to be considered. Here, we compare simulations with an analytical expression derived for a homogeneous current density distribution, which yields excellent agreement for $λ_L>w,d$. Moreover, we analyze $φ_μ$ provided by the introduction of a constriction in the SQUID arm below the magnetic dipole.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Temporal evolution of electric transport properties of YBCO Josephson junctions produced by focused Helium ion beam irradiation
Authors:
M. Karrer,
K. Wurster,
J. Linek,
M. Meichsner,
R. Kleiner,
E. Goldobin,
D. Koelle
Abstract:
Using a $30\,\mathrm{keV}$ focused He ion beam (He-FIB) with a wide range of irradiation doses $D=100$ to $1000\,\mathrm{ions/nm}$ we fabricated Josephson and resistive barriers within microbridges of epitaxially grown single crystalline YBCO thin films and investigated the change of their electric transport properties with time. One set of samples (#1A) was simply stored at room temperature under…
▽ More
Using a $30\,\mathrm{keV}$ focused He ion beam (He-FIB) with a wide range of irradiation doses $D=100$ to $1000\,\mathrm{ions/nm}$ we fabricated Josephson and resistive barriers within microbridges of epitaxially grown single crystalline YBCO thin films and investigated the change of their electric transport properties with time. One set of samples (#1A) was simply stored at room temperature under nitrogen atmosphere. A second set (#2D) was post-annealed at $90^\circ\,\mathrm{C}$ using high oxygen pressures and a third set (#2E) at low oxygen pressures. We found that for #1A the critical current density $j_c$ at $4.2\,\mathrm{K}$ changes as $j_c\propto\exp(-\sqrt{t/τ})$ with time $t$, where the relaxation times $τ$ increases exponentially with $D$, which can be described within a limited diffusion based model. In order to increase the diffusion rate we annealed the junctions from #2D at $90^\circ\,\mathrm{C}$ for $30\,\mathrm{min}$ in oxygen environment. Directly after annealing the critical current density $j_c$ increased, while the normal state resistance $R_n$ decreased. Repeated measurements showed that within a week the junctions relaxed to a quasi-stable state, in which the time scale for junction parameter variations increased to several weeks, making this a feasible option to achieve temporal stability of parameters of He-FIB Josephson junctions in YBCO.
△ Less
Submitted 5 April, 2023;
originally announced April 2023.
-
NanoSQUIDs from YBa$_2$Cu$_3$O$_7$/SrTiO$_3$ superlattices with bicrystal grain boundary Josephson junctions
Authors:
J. Lin,
J. Linek,
R. Kleiner,
D. Koelle
Abstract:
We report on the fabrication and characterization of nanopatterned dc SQUIDs with grain boundary Josephson junctions based on heteroepitaxially grown YBa$_2$Cu$_3$O$_7$ (YBCO)/ SiTrO$_3$ (STO) superlattices on STO bicrystal substrates. Nanopatterning is performed by Ga focused-ion-beam milling. The electric transport properties and thermal white flux noise of superlattice nanoSQUIDs are comparable…
▽ More
We report on the fabrication and characterization of nanopatterned dc SQUIDs with grain boundary Josephson junctions based on heteroepitaxially grown YBa$_2$Cu$_3$O$_7$ (YBCO)/ SiTrO$_3$ (STO) superlattices on STO bicrystal substrates. Nanopatterning is performed by Ga focused-ion-beam milling. The electric transport properties and thermal white flux noise of superlattice nanoSQUIDs are comparable to single layer YBCO devices on STO bicrystals. However, we find that the superlattice nanoSQUIDs have more than an order of magnitude smaller low-frequency excess flux noise, with root-mean-square spectral density $S_Φ^{1/2}\sim 5-6\,μΦ_0/\sqrt{\rm Hz}$ at 1 Hz ($Φ_0$ is the magnetic flux quantum). We attribute this improvement to an improved microstructure at the grain boundaries forming the Josephson junctions in our YBCO nanoSQUDs.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
