-
Color-switching hydrogels as integrated microfluidic pressure sensors
Authors:
Lucie Ducloué,
Md. Anamul Haque,
Martyna Goral,
Muhammad Ilyas,
Jian ** Gong,
Anke Lindner
Abstract:
Precisely measuring pressure in microfluidic flows is essential for flow control, fluid characterization, and monitoring, but faces specific challenges such as \RE{achieving} sufficient resolution, non-invasiveness, or ease of use. Here, we demonstrate a fully integrated multiplexed optofluidic pressure sensor, entirely decoupled from the flow path, that enables local pressure measurements along a…
▽ More
Precisely measuring pressure in microfluidic flows is essential for flow control, fluid characterization, and monitoring, but faces specific challenges such as \RE{achieving} sufficient resolution, non-invasiveness, or ease of use. Here, we demonstrate a fully integrated multiplexed optofluidic pressure sensor, entirely decoupled from the flow path, that enables local pressure measurements along any microfluidic channel without altering its flow geometry. The sensor itself relies on the compression of a soft mechano-actuated hydrogel, changing color in response to a pressure change. The hydrogel is separated from the fluid circulating in the channel by a thin membrane, allowing for the unrestricted use of different types of fluids. Imaging the gel through the transparent PDMS with a color camera provides a direct, easy, and contact-free determination of the fluid pressure at the sensing location for pressures as small as \SI{20}{\milli\bar} with a resolution of around \SI{10}{\milli\bar}. The sensitivity and accessible pressure range can be tuned via the mechanical properties \RE{of the sensing unit}. The photonic gel can also be used to acquire 2D pressure or deformation maps, taking advantage of the fast response time and fine spatial resolution.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Dynamics of rigid fibers interacting with triangular obstacles in microchannel flows
Authors:
Zhibo Li,
Clément Bielinski,
Anke Lindner,
Olivia du Roure,
Blaise Delmotte
Abstract:
Fiber suspensions flowing in structured media are encountered in many biological and industrial systems. Interactions between fibers and the transporting flow as well as fiber contact with obstacles can lead to complex dynamics. In this work, we combine microfluidic experiments and numerical simulations to study the interactions of a rigid fiber with an individual equilateral triangular pillar in…
▽ More
Fiber suspensions flowing in structured media are encountered in many biological and industrial systems. Interactions between fibers and the transporting flow as well as fiber contact with obstacles can lead to complex dynamics. In this work, we combine microfluidic experiments and numerical simulations to study the interactions of a rigid fiber with an individual equilateral triangular pillar in a microfluidic channel. Four dominant fiber dynamics are identified: transport above or below the obstacle, pole vaulting and trap**, in excellent agreement between experiments and modeling. The dynamics are classified as a function of the length, angle and lateral position of the fibers at the channel entry. We show that the orientation and lateral position close to the obstacle are responsible for the fiber dynamics and we link those to the initial conditions of the fibers at the channel entrance. Direct contact between the fibers and the pillar is required to obtain strong modification of the fiber trajectories, which is associated to irreversible dynamics. Longer fibers are found to be more laterally shifted by the pillar than shorter fibers that rather tend to remain on their initial streamline. Our findings could in the future be used to design and optimize microfluidic sorting devices to sort rigid fibers by length.
△ Less
Submitted 5 March, 2024; v1 submitted 29 November, 2023;
originally announced November 2023.
-
Spin-orbit interaction driven terahertz nonlinear dynamics in transition metals
Authors:
Ruslan Salikhov,
Markus Lysne,
Philipp Werner,
Igor Ilyakov,
Michael Schüler,
Thales V. A. G. de Oliveira,
Alexey Ponomaryov,
Atiqa Arshad,
Gulloo Lal Prajapati,
Jan-Christoph Deinert,
Pavlo Makushko,
Denys Makarov,
Thomas Cowan,
Jürgen Fassbender,
Jürgen Lindner,
Aleksandra Lindner,
Carmine Ortix,
Sergey Kovalev
Abstract:
The interplay of electric charge, spin, and orbital polarizations, coherently driven by picosecond long oscillations of light fields in spin-orbit coupled systems, is the foundation of emerging terahertz spintronics and orbitronics. The essential rules for how terahertz light interacts with these systems in a nonlinear way are still not understood. In this work, we demonstrate a universally applic…
▽ More
The interplay of electric charge, spin, and orbital polarizations, coherently driven by picosecond long oscillations of light fields in spin-orbit coupled systems, is the foundation of emerging terahertz spintronics and orbitronics. The essential rules for how terahertz light interacts with these systems in a nonlinear way are still not understood. In this work, we demonstrate a universally applicable electronic nonlinearity originating from spin-orbit interactions in conducting materials, wherein the interplay of light-induced spin and orbital textures manifests. We utilized terahertz harmonic generation spectroscopy to investigate the nonlinear dynamics over picosecond timescales in various transition metal films. We found that the terahertz harmonic generation efficiency scales with the spin Hall conductivity in the studied films, while the phase takes two possible values (shifted by π), depending on the d-shell filling. These findings elucidate the fundamental mechanisms governing non-equilibrium spin and orbital polarization dynamics at terahertz frequencies, which is relevant for potential applications of terahertz spin- and orbital-based devices.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Asymmetric bistability of chiral particle orientation in viscous shear flows
Authors:
Andreas Zöttl,
Francesca Tesser,
Daiki Matsunaga,
Justine Laurent,
Olivia Du Roure,
Anke Lindner
Abstract:
The migration of helical particles in viscous shear flows plays a crucial role in chiral particle sorting. Attaching a non-chiral head to a helical particle leads to a rheotactic torque inducing particle reorientation. This phenomenon is responsible for bacterial rheotaxis observed for flagellated bacteria as Escherichia coli in shear flows. Here we use a high-resolution microprinting technique to…
▽ More
The migration of helical particles in viscous shear flows plays a crucial role in chiral particle sorting. Attaching a non-chiral head to a helical particle leads to a rheotactic torque inducing particle reorientation. This phenomenon is responsible for bacterial rheotaxis observed for flagellated bacteria as Escherichia coli in shear flows. Here we use a high-resolution microprinting technique to fabricate micro-particles with controlled and tunable chiral shape consisting of a spherical head and helical tails of various pitch and handedness. By observing the fully time-resolved dynamics of these micro-particles in microfluidic channel flow, we gain valuable insights into chirality-induced orientation dynamics. Our experimental model system allows us to examine the effects of particle elongation, chirality, and head-heaviness for different flow rates on the orientation dynamics, while minimizing the influence of Brownian noise. Through our model experiments we demonstrate the existence of asymmetric bistability of the particle orientation perpendicular to the flow direction. We quantitatively explain the particle equilibrium orientations as a function of particle properties, initial conditions and flow rates, as well as the time-dependence of the reorientation dynamics through a theoretical model. The model parameters are determined using boundary element simulations and excellent agreement with experiments is obtained without any adjustable parameters. Our findings lead to a better understanding of chiral particle transport, bacterial rheotaxis and might allow the development of targeted delivery applications.
△ Less
Submitted 17 October, 2023; v1 submitted 16 November, 2022;
originally announced November 2022.
-
Pitch Controls the Flexibility of Helical Ribbons
Authors:
Lucas Prévost,
Anke Lindner,
Olivia du Roure
Abstract:
Helical objects are often implemented in electronic or mechanical micro-systems, requiring a precise understanding of their mechanical properties. While helices formed by cylindrical filaments have been intensely investigated, little is known about the role of the cross-section of the filament at the basis of the helical shape. We study experimentally the force-extension response of micro-helices…
▽ More
Helical objects are often implemented in electronic or mechanical micro-systems, requiring a precise understanding of their mechanical properties. While helices formed by cylindrical filaments have been intensely investigated, little is known about the role of the cross-section of the filament at the basis of the helical shape. We study experimentally the force-extension response of micro-helices fabricated from ultra-thin PMMA ribbons. Leveraging newly achieved control on the helix geometry, the influence of the helical pitch is quantified and a significant stiffening of the helical ribbons with increasing pitch is highlighted. Two phenomena are identified: a mechanical transition from a regime dominated by twisting of the ribbon at small pitch to a bending-dominated regime at high pitch and a purely geometrical effect, specific to helical ribbons. Excellent agreement is found with a previously established analytical model of inextensible elastic strips.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
Frustrated run and tumble of swimming E-coli bacteria in nematic liquid crystals
Authors:
Martyna Goral,
Eric Clement,
Thierry Darnige,
Teresa Lopez-Leon,
Anke Lindner
Abstract:
In many situations bacteria move in complex environments, as for example in soils, oceans or the human gut-track microbiome. In these natural environments, carrier fluids such as mucus or reproductive fluids show complex structure associated with non-Newtonian rheology. Many fundamental questions concerning the the ability to navigate in such environments remain unsolved due to the inherent comple…
▽ More
In many situations bacteria move in complex environments, as for example in soils, oceans or the human gut-track microbiome. In these natural environments, carrier fluids such as mucus or reproductive fluids show complex structure associated with non-Newtonian rheology. Many fundamental questions concerning the the ability to navigate in such environments remain unsolved due to the inherent complexity of the natural surroundings. Recently, the interaction of swimming bacteria with nematic liquid crystals has attracted lot of attention. In these structured fluids, the kinetics of bacterial motion is constrained by the orientational molecular order of the liquid crystal (or director field) and novel spatio-temporal patterns arise from this orientational constraint, as well as from the interactions with topological defects. A question unaddressed so far is how bacteria are able to change swimming direction in such an environment. In this work, we study the swimming mechanism of a single bacterium, E. coli, constrained to move along the director field of a lyotropic chromonic liquid crystal (LCLC) that is confined to a planar cell. In such an environment, the spontaneous run and tumble motion of the bacterium gets frustrated: the elasticity of the liquid crystal prevents flagella from unbundling. Interestingly, in order to change direction, bacteria execute a reversal motion along the director field, driven by the relocation of a single flagellum to the other side of the bacterial body, coined as a frustrated tumble. We present a detailed experimental characterization of this phenomenon, exploiting exceptional spatial and temporal resolution of bacteria and flagella dynamics during swimming, obtained using a two color Lagrangian tracking technique. We suggest a possible mechanism behind the frustrated run and tumble motion, accounting for these observations.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Dynamics of flexible filaments in oscillatory shear flows
Authors:
Francesco Bonacci,
Brato Chakrabarti,
David Saintillan,
Olivia du Roure,
Anke Lindner
Abstract:
The fluid-structure interactions between flexible fibers and viscous flows play an essential role in various biological phenomena, medical problems, and industrial processes. Of particular interest is the case of particles freely transported in time-dependent flows. This work elucidates the dynamics and morphologies of actin filaments under oscillatory shear flows by combining microfluidic experim…
▽ More
The fluid-structure interactions between flexible fibers and viscous flows play an essential role in various biological phenomena, medical problems, and industrial processes. Of particular interest is the case of particles freely transported in time-dependent flows. This work elucidates the dynamics and morphologies of actin filaments under oscillatory shear flows by combining microfluidic experiments, numerical simulations, and theoretical modeling. Our work reveals that, in contrast to steady shear flows, in which small orientational fluctuations from a flow-aligned state initiate tumbling and deformations, the periodic flow reversal allows the filament to explore many different configurations at the beginning of each cycle. Investigation of filament motion during half time periods of oscillation highlights the critical role of the initial filament orientation on the emergent dynamics. This strong coupling between orientation and deformation results in new deformation regimes and novel higher-order buckling modes absent in steady shear flows. The primary outcome of our analysis is the possibility of suppression of buckling instabilities for certain combinations of the oscillation frequency and initial filament orientation, even in very strong flows. We explain this unusual behavior through a weakly nonlinear Landau theory of buckling, in which we treat the filaments as inextensible Brownian Euler-Bernoulli rods whose hydrodynamics are described by local slender-body theory.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Sha** Nanoscale Ribbons into Micro-Helices of Controllable Radius and Pitch
Authors:
Lucas Prévost,
Dylan M. Barber,
Marine Daïeff,
Jonathan T. Pham,
Alfred J. Crosby,
Todd Emrick,
Olivia du Roure,
Anke Lindner
Abstract:
We report fabrication of highly flexible micron-sized helices from nanometer-thick ribbons. Building upon the helical coiling of such ultra-thin ribbons mediated by surface tension, we demonstrate that the enhanced creep properties of highly confined materials can be leveraged to shape helices into the desired geometry with full control of the final shape. The helical radius, total length and pitc…
▽ More
We report fabrication of highly flexible micron-sized helices from nanometer-thick ribbons. Building upon the helical coiling of such ultra-thin ribbons mediated by surface tension, we demonstrate that the enhanced creep properties of highly confined materials can be leveraged to shape helices into the desired geometry with full control of the final shape. The helical radius, total length and pitch angle are all freely and independently tunable within a wide range: radius within $\sim$ 1-100 micrometer, length within $\sim$ 100-3000 micrometer, and pitch angle within $\sim$ 0-70°. This fabrication method is validated for three different materials: poly(methyl methacrylate), poly(dimethylaminoethyl methacrylate), and transition metal chalcogenide quantum dots, each corresponding to a different solid-phase structure: respectively a polymer glass, a crosslinked hydrogel, and a nanoparticle array. This demonstrates excellent versatility with respect to material selection, enabling further control of the helix mechanical properties.
△ Less
Submitted 24 June, 2022; v1 submitted 1 March, 2022;
originally announced March 2022.
-
Fiber buckling in confined viscous flows: an absolute instability described by the Ginzburg-Landau equation
Authors:
Jean Cappello,
Olivia du Roure,
François Gallaire,
Camille Duprat,
Anke Lindner
Abstract:
We explore the dynamics of a flexible fiber transported by a viscous flow in a Hele-Shaw cell of height comparable to the fiber height. We show that long fibers aligned with the flow experience a buckling instability. Competition between viscous and elastic forces leads to the deformation of the fiber into a wavy shape convolved by a Bell-shaped envelope. We characterize the wavelength and phase v…
▽ More
We explore the dynamics of a flexible fiber transported by a viscous flow in a Hele-Shaw cell of height comparable to the fiber height. We show that long fibers aligned with the flow experience a buckling instability. Competition between viscous and elastic forces leads to the deformation of the fiber into a wavy shape convolved by a Bell-shaped envelope. We characterize the wavelength and phase velocity of the deformation as well as the growth and spreading of the envelope. Our study of the spatio-temporal evolution of the deformation reveals a linear and absolute instability arising from a local mechanism well described by the Ginzburg-Landau equation.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Programmed Wrap** and Assembly of Droplets with Mesoscale Polymers
Authors:
Dylan M. Barber,
Zhefei Yang,
Lucas Prevost,
Olivia du Roure,
Anke Lindner,
Todd Emrick,
Alfred J. Crosby
Abstract:
Nature is remarkably adept at using interfaces to build structures, encapsulate reagents, and regulate biological processes. Inspired by Nature, we describe flexible polymer-based ribbons, termed "mesoscale polymers" (MSPs), to modulate interfacial interactions with liquid droplets. This produces unprecedented hybrid assemblies in the forms of flagellum-like structures and MSP-wrapped droplets. Su…
▽ More
Nature is remarkably adept at using interfaces to build structures, encapsulate reagents, and regulate biological processes. Inspired by Nature, we describe flexible polymer-based ribbons, termed "mesoscale polymers" (MSPs), to modulate interfacial interactions with liquid droplets. This produces unprecedented hybrid assemblies in the forms of flagellum-like structures and MSP-wrapped droplets. Successful preparation of these hybrid structures hinges on interfacial interactions and tailored MSP compositions, such as MSPs with domains possessing distinctly different affinity for fluid-fluid interfaces as well as mechanical properties. In situ measurements of MSP-droplet interactions confirm that MSPs possess a negligible bending stiffness, allowing interfacial energy to drive mesoscale assembly. By exploiting these interfacial driving forces, mesoscale polymers are demonstrated as a powerful platform that underpins the preparation of sophisticated hybrid structures in fluids.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
Run-to-Tumble Variability Controls the Surface Residence Times of ${\it E.~coli}$ Bacteria
Authors:
Gaspard Junot,
Thierry Darnige,
Anke Lindner,
Vincent A. Martinez,
Jochen Arlt,
Angela Dawson,
Wilson C. K. Poon,
Harold Auradou,
Eric Clément
Abstract:
Motile bacteria are known to accumulate at surfaces, eventually leading to changes in bacterial motility and bio-film formation. We use a novel two-colour, three-dimensional Lagrangian tracking technique, to follow simultaneously the body and the flagella of a wild-type ${\it Escherichia~coli}$. We observe long surface residence times and surface escape corresponding mostly to immediately antecede…
▽ More
Motile bacteria are known to accumulate at surfaces, eventually leading to changes in bacterial motility and bio-film formation. We use a novel two-colour, three-dimensional Lagrangian tracking technique, to follow simultaneously the body and the flagella of a wild-type ${\it Escherichia~coli}$. We observe long surface residence times and surface escape corresponding mostly to immediately antecedent tumbling. A motility model accounting for a large behavioural variability in run-time duration, reproduces all experimental findings and gives new insights into surface trap** efficiency.
△ Less
Submitted 21 June, 2022; v1 submitted 23 July, 2021;
originally announced July 2021.
-
Signatures of elastoviscous buckling in the dilute rheology of stiff polymers
Authors:
Brato Chakrabarti,
Yanan Liu,
Olivia du Roure,
Anke Lindner,
David Saintillan
Abstract:
As a stiff polymer tumbles in shear flow, it experiences compressive viscous forces that can cause it to buckle and undergo a sequence of morphological transitions with increasing flow strength. We use numerical simulations to uncover the effects of these transitions on the steady shear rheology of a dilute suspension of stiff polymers. Our results agree with classic scalings for Brownian rods in…
▽ More
As a stiff polymer tumbles in shear flow, it experiences compressive viscous forces that can cause it to buckle and undergo a sequence of morphological transitions with increasing flow strength. We use numerical simulations to uncover the effects of these transitions on the steady shear rheology of a dilute suspension of stiff polymers. Our results agree with classic scalings for Brownian rods in relatively weak flows but depart from them above the buckling threshold. Signatures of elastoviscous buckling include enhanced shear thinning and an increase in the magnitude of normal stress differences. We discuss our findings in the light of past work on rigid Brownian rods and non-Brownian elastic fibers and highlight the subtle role of thermal fluctuations in triggering instabilities.
△ Less
Submitted 15 June, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Optimised hyperbolic microchannels for the mechanical characterisation of bio-particles
Authors:
Yanan Liu,
Konstantinos Zografos,
Joana Fidalgo,
Charles Duchêne,
Clément Quintard,
Thierry Darnige,
Vasco Filipe,
Sylvain Huille,
Olivia du Roure,
Mónica S. N. Oliveira,
Anke Lindner
Abstract:
The transport of bio-particles in viscous flows exhibits a rich variety of dynamical behaviour, such as morphological transitions, complex orientation dynamics or deformations. Characterising such complex behaviour under well controlled flows is key to understanding the microscopic mechanical properties of biological particles as well as the rheological properties of their suspensions. While gener…
▽ More
The transport of bio-particles in viscous flows exhibits a rich variety of dynamical behaviour, such as morphological transitions, complex orientation dynamics or deformations. Characterising such complex behaviour under well controlled flows is key to understanding the microscopic mechanical properties of biological particles as well as the rheological properties of their suspensions. While generating regions of simple shear flow in microfluidic devices is relatively straightforward, generating straining flows in which the strain rate is maintained constant for a sufficiently long time to observe the objects' morphologic evolution is far from trivial. In this work, we propose an innovative approach based on optimised design of microfluidic converging-diverging channels coupled with a microscope-based tracking method to characterise the dynamic behaviour of individual bio-particles under homogeneous straining flow. The tracking algorithm, combining a motorised stage and microscopy imaging system controlled by external signals, allows us to follow individual bio-particles transported over long-distances with high-quality images. We demonstrate experimentally the ability of the numerically optimised microchannels to provide linear velocity streamwise gradients along the centreline of the device, allowing for extended consecutive regions of homogeneous elongation and compression. We selected three test cases (DNA, actin filaments and protein aggregates) to highlight the ability of our approach for investigating the dynamics of objects with a wide range of sizes, characteristics and behaviours of relevance in the biological world.
△ Less
Submitted 5 August, 2020; v1 submitted 3 August, 2020;
originally announced August 2020.
-
Microfluidic In Situ Measurement of Poisson's Ratio of Hydrogels
Authors:
Jean Cappello,
Vincent d'Herbemont,
Anke Lindner,
Olivia du Roure
Abstract:
Being able to precisely characterize the mechanical properties of soft microparticles is essential for numerous situations from the understanding of the flow of biological fluids to the development of soft micro-robots. Here we present a simple measurement technique for the Poisson's ratio of soft micron-sized hydrogels in the presence of a surrounding liquid. This methods relies on the measuremen…
▽ More
Being able to precisely characterize the mechanical properties of soft microparticles is essential for numerous situations from the understanding of the flow of biological fluids to the development of soft micro-robots. Here we present a simple measurement technique for the Poisson's ratio of soft micron-sized hydrogels in the presence of a surrounding liquid. This methods relies on the measurement of the deformation in two orthogonal directions of a rectangular hydrogel slab compressed uni-axially inside a microfluidic channel. Due to the in situ character of the method, the sample does not need to be dried, allowing for the measurement of the mechanical properties of swollen hydrogels. Using this method we determine the Poisson's ratio of hydrogel particles composed of polyethylene glycol (PEG) and varying solvents fabricated using a lithography technique. The results demonstrate with high precision the dependence of the hydrogel compressibility on the solvent fraction and character. The method, easy to implement, can be adapted for the measurement of a variety of soft and biological materials.
△ Less
Submitted 19 March, 2020; v1 submitted 9 March, 2020;
originally announced March 2020.
-
Chirality-induced bacterial rheotaxis in bulk shear flows
Authors:
Guangyin **g,
Andreas Zöttl,
Éric Clément,
Anke Lindner
Abstract:
Interaction of swimming bacteria with flows controls their ability to explore complex environments, crucial to many societal and environmental challenges and relevant for microfluidic applications as cell sorting. Combining experimental, numerical and theoretical analysis, we present a comprehensive study of the transport of motile bacteria in shear flows. Experimentally, we obtain with high accur…
▽ More
Interaction of swimming bacteria with flows controls their ability to explore complex environments, crucial to many societal and environmental challenges and relevant for microfluidic applications as cell sorting. Combining experimental, numerical and theoretical analysis, we present a comprehensive study of the transport of motile bacteria in shear flows. Experimentally, we obtain with high accuracy and for a large range of flow rates, the spatially resolved velocity and orientation distributions. They are in excellent agreement with the simulations of a kinematic model accounting for stochastic and microhydrodynamic properties and in particular the flagella chirality. Theoretical analysis reveals the scaling laws behind the average rheotactic velocity at moderate shear rates using a chirality parameter and explains the reorientation dynamics leading to a saturation at large shear rates from the marginal stability of a fixed point. Our findings constitute a full understanding of the physical mechanisms and relevant parameters of bacteria bulk rheotaxis.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Flexible filaments buckle into helicoidal shapes in strong compressional flows
Authors:
Brato Chakrabarti,
Yanan Liu,
John LaGrone,
Ricardo Cortez,
Lisa Fauci,
Olivia du Roure,
David Saintillan,
Anke Lindner
Abstract:
The occurrence of coiled or helical morphologies is common in nature, from plant roots to DNA packaging into viral capsids, as well as in applications such as oil drilling processes. In many examples, chiral structures result from the buckling of a straight fiber either with intrinsic twist or to which end moments have been applied in addition to compression forces. Here, we elucidate a generic wa…
▽ More
The occurrence of coiled or helical morphologies is common in nature, from plant roots to DNA packaging into viral capsids, as well as in applications such as oil drilling processes. In many examples, chiral structures result from the buckling of a straight fiber either with intrinsic twist or to which end moments have been applied in addition to compression forces. Here, we elucidate a generic way to form regular helicoidal shapes from achiral straight filaments transported in viscous flows with free ends. Through a combination of experiments using fluorescently labeled actin filaments in microfluidic divergent flows and of two distinct sets of numerical simulations, we demonstrate the robustness of helix formation. A nonlinear stability analysis is performed and explains the emergence of such chiral structures from the nonlinear interaction of perpendicular planar buckling modes, an effect that solely requires a strong compressional flow, independent of the exact nature of the fiber or type of flow field. The fundamental mechanism for the uncovered morphological transition and characterization of the emerging conformations advance our understanding of several biological and industrial processes and can also be exploited for the controlled microfabrication of chiral objects.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Dynamics of flexible fibers in viscous flows and fluids
Authors:
O. du Roure,
A. Lindner,
E. N. Nazockdast,
M. J. Shelley
Abstract:
The dynamics and deformations of immersed flexible fibers are at the heart of important industrial and biological processes, induce peculiar mechanical and transport properties in the fluids that contain them, and are the basis for novel methods of flow control. Here we focus on the low Reynolds number regime where advances in studying these fiber-fluid systems have been especially rapid. On the e…
▽ More
The dynamics and deformations of immersed flexible fibers are at the heart of important industrial and biological processes, induce peculiar mechanical and transport properties in the fluids that contain them, and are the basis for novel methods of flow control. Here we focus on the low Reynolds number regime where advances in studying these fiber-fluid systems have been especially rapid. On the experimental side this is due to new methods of fiber synthesis, microfluidic flow control, and of microscope based tracking measurement techniques. Likewise, there have been continuous improvements in the specialized mathematical modeling and numerical methods needed to capture the interactions of slender flexible fibers with flows, boundaries, and each other.
△ Less
Submitted 22 May, 2019;
originally announced May 2019.
-
Following in the footsteps of E. coli: sperm in microfluidic "strictures"
Authors:
E. Altshuler,
G. Miño,
A. Lindner,
A. Rousselet,
E. Clément
Abstract:
We briefly describe the similarities of the experiments of sperm motion in microfluidic "strictures" by Zafeeani et al. in 2019 (Sci. Adv. 5, eaav21111, 2019) and those by Altshuler et al. in 2013 (Soft Matter 9, 1864, 2013). We shortly discuss the hydrodynamic elements justifying the strong resemblance between the two types of experiments, and suggest that other previous results in E. coli motion…
▽ More
We briefly describe the similarities of the experiments of sperm motion in microfluidic "strictures" by Zafeeani et al. in 2019 (Sci. Adv. 5, eaav21111, 2019) and those by Altshuler et al. in 2013 (Soft Matter 9, 1864, 2013). We shortly discuss the hydrodynamic elements justifying the strong resemblance between the two types of experiments, and suggest that other previous results in E. coli motion (Soft Matter 11, 6248, 2015) may shed further light on the understanding of sperm migration.
△ Less
Submitted 5 April, 2019;
originally announced April 2019.
-
E. coli "super-contaminates" narrow ducts fostered by broad run-time distribution
Authors:
Nuris Figueroa-Morales,
Aramis Rivera,
Rodrigo Soto,
Anke Lindner,
Ernesto Altshuler,
Eric Clement
Abstract:
One striking feature of bacterial motion is their ability to swim upstream along corners and crevices, by leveraging hydrodynamic interactions. This motion through anatomic ducts or medical devices might be at the origin of serious infections. However, it remains unclear how bacteria can maintain persistent upstream motion while exhibiting run-and-tumble dynamics. Here we demonstrate that E. coli…
▽ More
One striking feature of bacterial motion is their ability to swim upstream along corners and crevices, by leveraging hydrodynamic interactions. This motion through anatomic ducts or medical devices might be at the origin of serious infections. However, it remains unclear how bacteria can maintain persistent upstream motion while exhibiting run-and-tumble dynamics. Here we demonstrate that E. coli can travel upstream in microfluidic devices over distances of 15 millimeters in times as short as 15 minutes. Using a stochastic model relating the run times to the time bacteria spend on surfaces, we quantitatively reproduce the evolution of the contamination profiles when considering a broad distribution of run times. Interestingly, the experimental data cannot be reproduced using the usually accepted exponential distribution of run times. Our study demonstrates that the run-and-tumble statistics determine macroscopic bacterial transport properties. This effect, that we name "super-contamination", could explain the fast onset of some life-threatening medical emergencies.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Swimming bacteria in Poiseuille flow: the quest for active Bretherton-Jeffery trajectories
Authors:
Gaspard Junot,
Nuris Figueroa-Morales,
Thierry Darnige,
Anke Lindner,
Rodrigo Soto,
Harold Auradou,
Eric Clément
Abstract:
Using a 3D Lagrangian tracking technique, we determine experimentally the trajectories of non-tumbling E. coli mutants swimming in a Poiseuille flow. We identify a typology of trajectories in agreement with a kinematic "active Bretherton-Jeffery" model, featuring an axi-symmetric self-propelled ellipsoid. In particular, we recover the "swinging" and "shear tumbling" kinematics predicted theoretica…
▽ More
Using a 3D Lagrangian tracking technique, we determine experimentally the trajectories of non-tumbling E. coli mutants swimming in a Poiseuille flow. We identify a typology of trajectories in agreement with a kinematic "active Bretherton-Jeffery" model, featuring an axi-symmetric self-propelled ellipsoid. In particular, we recover the "swinging" and "shear tumbling" kinematics predicted theoretically by Zöttl et al. Moreover using this model, we derive analytically new features such as quasi-planar piece-wise trajectories, associated with the high aspect ratio of the bacteria, as well as the existence of a drift angle around which bacteria perform closed cyclic trajectories. However, the agreement between the model predictions and the experimental results remains local in time, due to the presence of Brownian rotational noise.
△ Less
Submitted 29 May, 2019; v1 submitted 7 March, 2019;
originally announced March 2019.
-
Controlling transport dynamics of confined asymmetric fibers
Authors:
M. Bechert,
J. Cappello,
M. Daïeff,
F. Gallaire,
A. Lindner,
C. Duprat
Abstract:
Transport properties of particles in confining geometries show very specific characteristics as lateral drift, oscillatory movement between lateral walls or the deformation of flexible fibers. These dynamics result from viscous friction with transversal and lateral channel walls inducing strong flow perturbations around the particles that act like moving obstacles. In this paper, we modify the fib…
▽ More
Transport properties of particles in confining geometries show very specific characteristics as lateral drift, oscillatory movement between lateral walls or the deformation of flexible fibers. These dynamics result from viscous friction with transversal and lateral channel walls inducing strong flow perturbations around the particles that act like moving obstacles. In this paper, we modify the fiber shape by adding an additional, small fiber arm, which leads to T and L shaped fibers with only one or, respectively, zero symmetry axes and investigate the transport properties. For this purpose, we combine precise microfluidic experiments and numerical simulations based on modified Brinkman equations. Even for small shape perturbations, the transport dynamics change fundamentally and formerly stable configurations become unstable, leading to non-monotonous fiber rotation and lateral drift. Our results show that the fundamental transport dynamics change with respect to the level of fiber symmetry, which thus enables a precise control of particle trajectories and which can further be used for targeted delivery, particle sorting or capture inside microchannels.
△ Less
Submitted 2 April, 2020; v1 submitted 2 March, 2019;
originally announced March 2019.
-
Morphological transitions of elastic filaments in shear flow
Authors:
Yanan Liu,
Brato Chakrabarti,
David Saintillan,
Anke Lindner,
Olivia du Roure
Abstract:
The morphological dynamics, instabilities and transitions of elastic filaments in viscous flows underlie a wealth of biophysical processes from flagellar propulsion to intracellular streaming, and are also key to deciphering the rheological behavior of many complex fluids and soft materials. Here, we combine experiments and computational modeling to elucidate the dynamical regimes and morphologica…
▽ More
The morphological dynamics, instabilities and transitions of elastic filaments in viscous flows underlie a wealth of biophysical processes from flagellar propulsion to intracellular streaming, and are also key to deciphering the rheological behavior of many complex fluids and soft materials. Here, we combine experiments and computational modeling to elucidate the dynamical regimes and morphological transitions of elastic Brownian filaments in a simple shear flow. Actin filaments are employed as an experimental model system and their conformations are investigated through fluorescence microscopy in microfluidic channels. Simulations matching the experimental conditions are also performed using inextensible Euler-Bernoulli beam theory and non-local slender-body hydrodynamics in the presence of thermal fluctuations, and agree quantitatively with observations. We demonstrate that filament dynamics in this system is primarily governed by a dimensionless elasto-viscous number comparing viscous drag forces to elastic bending forces, with thermal fluctuations only playing a secondary role. While short and rigid filaments perform quasi-periodic tumbling motions, a buckling instability arises above a critical flow strength. A second transition to strongly-deformed shapes occurs at a yet larger value of the elasto-viscous number and is characterized by the appearance of localized high-curvature bends that propagate along the filaments in apparent "snaking" motions. A theoretical model for the so far unexplored onset of snaking accurately predicts the transition and explains the observed dynamics. For the first time, we present a complete characterization of filament morphologies and transitions as a function of elasto-viscous number and scaled persistence length and demonstrate excellent agreement between theory, experiments and simulations.
△ Less
Submitted 7 November, 2018; v1 submitted 29 March, 2018;
originally announced March 2018.
-
Oscillatory surface rheotaxis of swimming E. coli bacteria
Authors:
Arnold Mathijssen,
Nuris Figueroa-Morales,
Gaspard Junot,
Eric Clement,
Anke Lindner,
Andreas Zöttl
Abstract:
Bacterial contamination of biological conducts, catheters or water resources is a major threat to public health and can be amplified by the ability of bacteria to swim upstream. The mechanisms of this rheotaxis, the reorientation with respect to flow gradients, often in complex and confined environments, are still poorly understood. Here, we follow individual E. coli bacteria swimming at surfaces…
▽ More
Bacterial contamination of biological conducts, catheters or water resources is a major threat to public health and can be amplified by the ability of bacteria to swim upstream. The mechanisms of this rheotaxis, the reorientation with respect to flow gradients, often in complex and confined environments, are still poorly understood. Here, we follow individual E. coli bacteria swimming at surfaces under shear flow with two complementary experimental assays, based on 3D Lagrangian tracking and fluorescent flagellar labelling and we develop a theoretical model for their rheotactic motion. Three transitions are identified with increasing shear rate: Above a first critical shear rate, bacteria shift to swimming upstream. After a second threshold, we report the discovery of an oscillatory rheotaxis. Beyond a third transition, we further observe coexistence of rheotaxis along the positive and negative vorticity directions. A full theoretical analysis explains these regimes and predicts the corresponding critical shear rates. The predicted transitions as well as the oscillation dynamics are in good agreement with experimental observations. Our results shed new light on bacterial transport and reveal new strategies for contamination prevention.
△ Less
Submitted 18 November, 2018; v1 submitted 5 March, 2018;
originally announced March 2018.
-
3D spatial exploration by E. coli echoes motor temporal variability
Authors:
Nuris Figueroa-Morales,
Rodrigo Soto,
Gaspard Junot,
Thierry Darnige,
Carine Douarche,
Vincent Martinez,
Anke Lindner,
Eric Clément
Abstract:
Unraveling bacterial strategies for spatial exploration is crucial for understanding the complexity in the organization of life. Bacterial motility determines the spatio-temporal structure of microbial communities, controls infection spreading and the microbiota organization in guts or in soils. Most theoretical approaches for modeling bacterial transport rely on their run-and-tumble motion. For E…
▽ More
Unraveling bacterial strategies for spatial exploration is crucial for understanding the complexity in the organization of life. Bacterial motility determines the spatio-temporal structure of microbial communities, controls infection spreading and the microbiota organization in guts or in soils. Most theoretical approaches for modeling bacterial transport rely on their run-and-tumble motion. For Escherichia coli, the run time distribution was reported to follow a Poisson process with a single characteristic time related to the rotational switching of the flagellar motors. However, direct measurements on flagellar motors show heavy-tailed distributions of rotation times stemming from the intrinsic noise in the chemotactic mechanism. Currently, there is no direct experimental evidence that the stochasticity in the chemotactic machinery affect the macroscopic motility of bacteria. In stark contrast with the accepted vision of run-and-tumble, here we report a large behavioral variability of wild-type \emph{E. coli}, revealed in their three-dimensional trajectories. At short observation times, a large distribution of run times is measured on a population and attributed to the slow fluctuations of a signaling protein triggering the flagellar motor reversal. Over long times, individual bacteria undergo significant changes in motility. We demonstrate that such a large distribution of run times introduces measurement biases in most practical situations. Our results reconcile the notorious conundrum between run time observations and motor switching statistics. We finally propose that statistical modeling of transport properties currently undertaken in the emerging framework of active matter studies, should be reconsidered under the scope of this large variability of motility features.
△ Less
Submitted 13 November, 2019; v1 submitted 3 March, 2018;
originally announced March 2018.
-
Lagrangian 3D tracking of fluorescent microscopic objects in motion
Authors:
T. Darnige,
N. Figueroa-Morales,
P. Bohec,
A. Lindner,
E. Clément
Abstract:
We describe the development of a tracking device, mounted on an epi-fluorescent inverted microscope, suited to obtain time resolved 3D Lagrangian tracks of fluorescent passive or active micro-objects in micro-fluidic devices. The system is based on real-time image processing, determining the displacement of a x,y mechanical stage to keep the chosen object at a fixed position in the observation fra…
▽ More
We describe the development of a tracking device, mounted on an epi-fluorescent inverted microscope, suited to obtain time resolved 3D Lagrangian tracks of fluorescent passive or active micro-objects in micro-fluidic devices. The system is based on real-time image processing, determining the displacement of a x,y mechanical stage to keep the chosen object at a fixed position in the observation frame. The z displacement is based on the refocusing of the fluorescent object determining the displacement of a piezo mover kee** the moving object in focus. Track coordinates of the object with respect to the micro-fluidic device, as well as images of the object are obtained at a frequency of several tenths of Hertz. This device is particularly well adapted to obtain trajectories of motile micro-organisms in micro-fluidic devices with or without flow.
△ Less
Submitted 10 March, 2017; v1 submitted 15 November, 2016;
originally announced November 2016.
-
Deformation and shape of flexible, microscale helices in viscous flow
Authors:
Jonathan T. Pham,
Alexander Morozov,
Alfred J. Crosby,
Anke Lindner,
Olivia du Roure
Abstract:
We examine experimentally the deformation of flexible, microscale helical ribbons with nanoscale thickness subject to viscous flow in a microfluidic channel. Two aspects of flexible microhelices are quantified: the overall shape of the helix and the viscous frictional properties. The frictional coefficients determined by our experiments are consistent with calculated values in the context of resis…
▽ More
We examine experimentally the deformation of flexible, microscale helical ribbons with nanoscale thickness subject to viscous flow in a microfluidic channel. Two aspects of flexible microhelices are quantified: the overall shape of the helix and the viscous frictional properties. The frictional coefficients determined by our experiments are consistent with calculated values in the context of resistive force theory. Deformation of helices by viscous flow is well-described by non-linear finite extensibility. Under distributed loading, the pitch distribution is non-uniform and from this, we identify both linear and non-linear behavior along the contour length of a single helix. Moreover, flexible helices are found to display reversible global to local helical transitions at high flow rate.
△ Less
Submitted 17 August, 2015;
originally announced August 2015.
-
Single particles accelerate final stages of capillary break up
Authors:
Anke Lindner,
Jorge Eduardo Fiscina,
Christian Wagner
Abstract:
Droplet formation of suspensions is present in many industrial and technological processes such as coating and food engineering. Whilst the finite time singularity of the minimum neck diameter in capillary break-up of simple liquids can be described by well known self-similarity solutions, the pinching of non-Brownian suspension depends in a complex way on the particle dynamics in the thinning thr…
▽ More
Droplet formation of suspensions is present in many industrial and technological processes such as coating and food engineering. Whilst the finite time singularity of the minimum neck diameter in capillary break-up of simple liquids can be described by well known self-similarity solutions, the pinching of non-Brownian suspension depends in a complex way on the particle dynamics in the thinning thread. Here we focus on the very dilute regime where the filament contains only isolated beads to identify the physical mechanisms leading to the pronounced acceleration of the filament thinning observed. This accelerated regime is characterized by an asymmetric shape of the filament with an enhanced curvature that depends on the size and the spatial distribution of the particles within the capillary thread.
△ Less
Submitted 12 June, 2015;
originally announced June 2015.
-
Living on the edge: transfer and traffic of E. coli in a confined flow
Authors:
Nuris Figueroa-Morales,
Gastón Miño,
Aramis Rivera,
Rogelio Caballero,
Eric Clément,
Ernesto Altshuler,
Anke Lindner
Abstract:
We quantitatively study the transport of E. coli near the walls of confined microfluidic channels, and in more detail along the edges formed by the interception of two perpendicular walls. Our experiments establish the connection between bacteria motion at the flat surface and at the edges and demonstrate the robustness of the upstream motion at the edges. Upstream migration of E. coli at the edge…
▽ More
We quantitatively study the transport of E. coli near the walls of confined microfluidic channels, and in more detail along the edges formed by the interception of two perpendicular walls. Our experiments establish the connection between bacteria motion at the flat surface and at the edges and demonstrate the robustness of the upstream motion at the edges. Upstream migration of E. coli at the edges is possible at much larger flow rates compared to motion at the flat surfaces. Interestingly, the bacteria speed at the edges mainly results from collisions between bacteria moving along this single line. We show that upstream motion not only takes place at the edge but also in an "edge boundary layer" whose size varies with the applied flow rate. We quantify the bacteria fluxes along the bottom walls and the edges and show that they result from both the transport velocity of bacteria and the decrease of surface concentration with increasing flow rate due to erosion processes. We rationalize our findings as a function of the local variations of the shear rate in the rectangular channels and hydrodynamic attractive forces between bacteria and walls.
△ Less
Submitted 21 April, 2015;
originally announced April 2015.
-
Serpentine channels: micro -- rheometers for fluid relaxation times
Authors:
Josephine Zilz,
Christof Schäfer,
Christian Wagner,
Robert J. Poole,
Manuel A. Alves,
Anke Lindner
Abstract:
We propose a novel device capable of measuring the relaxation time of viscoelastic fluids as small as 1\,ms. In contrast to most rheometers, which by their very nature are concerned with producing viscometric or nearly-viscometric flows, here we make use of an elastic instability which occurs in the flow of viscoelastic fluids with curved streamlines. To calibrate the rheometer we combine simple s…
▽ More
We propose a novel device capable of measuring the relaxation time of viscoelastic fluids as small as 1\,ms. In contrast to most rheometers, which by their very nature are concerned with producing viscometric or nearly-viscometric flows, here we make use of an elastic instability which occurs in the flow of viscoelastic fluids with curved streamlines. To calibrate the rheometer we combine simple scaling arguments with relaxation times obtained from first normal-stress difference data measured in a classical shear rheometer. As an additional check we also compare these relaxation times to those obtained from Zimm theory and good agreement is observed. Once calibrated, we show how the serpentine rheometer can be used to access smaller polymer concentrations and lower solvent viscosities where classical measurements become difficult or impossible to use due to inertial and/or resolution limitations. In the absence of calibration the serpentine channel can still be a very useful comparative or index device.
△ Less
Submitted 6 October, 2013;
originally announced October 2013.
-
Quantitative analysis of the debonding structure of soft adhesives
Authors:
François Tanguy,
Matteo Nicoli,
Anke Lindner,
Costantino Creton
Abstract:
We experimentally investigate the growth dynamics of cavities nucleating during the first stages of debonding of three different model adhesives. The material properties of these adhesives range from a more liquid-like material to a soft viscoelastic solid and are carefully characterized by small strain oscillatory shear rheology as well as large strain uniaxial extension. The debonding experiment…
▽ More
We experimentally investigate the growth dynamics of cavities nucleating during the first stages of debonding of three different model adhesives. The material properties of these adhesives range from a more liquid-like material to a soft viscoelastic solid and are carefully characterized by small strain oscillatory shear rheology as well as large strain uniaxial extension. The debonding experiments are performed on a probe tack set-up. Using high contrast images of the debonding process and precise image analysis tools we quantify the total projected area of the cavities, the average cavity shape and growth rate and link these observations to the material properties. These measurements are then used to access corrected effective stress and strain curves that can be directly compared to the results from the uniaxial extension.
△ Less
Submitted 3 May, 2013;
originally announced May 2013.
-
Particles accelerate the detachment of viscous liquids
Authors:
Merlijn S. van Deen,
Thibault Bertrand,
Nhung Vu,
David Quéré,
Eric Clément,
Anke Lindner
Abstract:
During detachment of a viscous fluid extruded from a nozzle a filament linking the droplet to the latter is formed. Under the effect of surface tension the filament thins until pinch off and final detachment of the droplet. In this paper we study the effect of the presence of individual particles trapped in the filament on the detachment dynamics using granular suspensions of small volume fraction…
▽ More
During detachment of a viscous fluid extruded from a nozzle a filament linking the droplet to the latter is formed. Under the effect of surface tension the filament thins until pinch off and final detachment of the droplet. In this paper we study the effect of the presence of individual particles trapped in the filament on the detachment dynamics using granular suspensions of small volume fractions (φ < 6%). We show that even a single particle strongly modifies the detachment dynamics. The particle perturbs the thinning of the thread and a large droplet of fluid around the particle is formed. This perturbation leads to an acceleration of the detachment of the droplet compared to the detachment ob- served for a pure fluid. We quantify this acceleration for single particles of different sizes and link it to similar ob- servations for suspensions of small volume fractions. Our study also gives more insight into particulate effects on de- tachment of more dense suspensions and allows to explain the accelerated detachment close to final pinch off observed previously (Bonnoit et al 2012)
△ Less
Submitted 31 January, 2013;
originally announced January 2013.
-
Non-Newtonian viscosity of E-coli suspensions
Authors:
Jérémie Gachelin,
Gastón Miño,
Hélène Berthet,
Anke Lindner,
Annie Rousselet,
Éric Clément
Abstract:
The viscosity of an active suspension of E-Coli bacteria is determined experimentally in the dilute and semi dilute regime using a Y shaped micro-fluidic channel. From the position of the interface between the pure suspending fluid and the suspension, we identify rheo-thickening and rheo-thinning regimes as well as situations at low shear rate where the viscosity of the bacteria suspension can be…
▽ More
The viscosity of an active suspension of E-Coli bacteria is determined experimentally in the dilute and semi dilute regime using a Y shaped micro-fluidic channel. From the position of the interface between the pure suspending fluid and the suspension, we identify rheo-thickening and rheo-thinning regimes as well as situations at low shear rate where the viscosity of the bacteria suspension can be lower than the viscosity of the suspending fluid. In addition, bacteria concentration and velocity profiles in the bulk are directly measured in the micro-channel.
△ Less
Submitted 7 October, 2012;
originally announced October 2012.
-
Geometric scaling of purely-elastic flow instabilities
Authors:
J. Zilz,
R. J. Poole,
M. A. Alves,
D. Bartolo,
B. Levache,
A. Lindner
Abstract:
We present a combined experimental, numerical and theoretical investigation of the geometric scaling of the onset of a purely-elastic flow instability in a serpentine channel. Good qualitative agreement is obtained between experiments, using dilute solutions of flexible polymers in microfluidic devices, and two-dimensional numerical simulations using the UCM model. The results are confirmed by a s…
▽ More
We present a combined experimental, numerical and theoretical investigation of the geometric scaling of the onset of a purely-elastic flow instability in a serpentine channel. Good qualitative agreement is obtained between experiments, using dilute solutions of flexible polymers in microfluidic devices, and two-dimensional numerical simulations using the UCM model. The results are confirmed by a simple theoretical analysis, based on the dimensionless criterion proposed by Pakdel-McKinley for onset of a purely-elastic instability.
△ Less
Submitted 23 September, 2011;
originally announced September 2011.
-
Accelerated drop detachment in granular suspensions
Authors:
Claire Bonnoit,
Thibault Bertrand,
Éric Clément,
Anke Lindner
Abstract:
We experimentally study the detachment of drops of granular suspensions using a density matched model suspension with varying volume fraction (φ = 15% to 55%) and grain diameter (d = 20 μm to 140 μm). We show that at the beginning of the detachment process, the suspensions behave as an effective fluid. The detachment dynamics in this regime can be entirely described by the shear viscosity of the s…
▽ More
We experimentally study the detachment of drops of granular suspensions using a density matched model suspension with varying volume fraction (φ = 15% to 55%) and grain diameter (d = 20 μm to 140 μm). We show that at the beginning of the detachment process, the suspensions behave as an effective fluid. The detachment dynamics in this regime can be entirely described by the shear viscosity of the suspension. At later stages of the detachment the dynamics become independent of the volume fraction and are found to be identical to the dynamics of the interstitial fluid. Surprisingly, visual observation reveals that at this stage particles are still present in the neck. We suspect rearrangements of particles to locally free the neck of grains, causing the observed dynamics. Close to the final pinch off, the detachment of the suspensions is further accelerated, compared to the dynamics of pure interstitial fluid. This acceleration might be due to the fact that the neck diameter gets of the order of magnitude of the size of the grains and a continuous thinning of the liquid thread is not possible any more. The crossover between the different detachment regimes is function of the grain size and the initial volume fraction. We characterize the overall acceleration as a function of the grain size and volume fraction.
△ Less
Submitted 10 August, 2011; v1 submitted 9 September, 2010;
originally announced September 2010.
-
Buckled in translation
Authors:
E. Wandersman,
N. Quennouz,
M. Fermigier,
A. Lindner,
O. du Roure
Abstract:
We report experiments on the deformation and transport of an elastic fiber in a viscous cellular flow, namely a lattice of counter-rotative vortices. We show that the fiber can buckle when approaching a stagnation point. By tuning either the flow or fiber properties, we measure the onset of this buckling instability. The buckling threshold is determined by the relative intensity of viscous and ela…
▽ More
We report experiments on the deformation and transport of an elastic fiber in a viscous cellular flow, namely a lattice of counter-rotative vortices. We show that the fiber can buckle when approaching a stagnation point. By tuning either the flow or fiber properties, we measure the onset of this buckling instability. The buckling threshold is determined by the relative intensity of viscous and elastic forces, the elasto-viscous number Sp. Moreover we show that flexible fibers escape faster from a vortex (formed by closed streamlines) compared to rigid fibers. As a consequence, the deformation of the fiber changes its transport properties in the cellular flow.
△ Less
Submitted 30 March, 2010;
originally announced March 2010.
-
Pattern Formation During Deformation of a Confined Viscoelastic Layer: From a Viscous Liquid to a Soft Elastic Solid
Authors:
J. Nase,
A. Lindner,
C. Creton
Abstract:
We study pattern formation during tensile deformation of confined viscoelastic layers. The use of a model system (PDMS with different degrees of crosslinking) allows us to go continuously from a viscous liquid to an elastic solid. We observe two distinct regimes of fingering instabilities: a regime called "elastic" with interfacial crack propagation where the fingering wavelength only scales wit…
▽ More
We study pattern formation during tensile deformation of confined viscoelastic layers. The use of a model system (PDMS with different degrees of crosslinking) allows us to go continuously from a viscous liquid to an elastic solid. We observe two distinct regimes of fingering instabilities: a regime called "elastic" with interfacial crack propagation where the fingering wavelength only scales with the film thickness, and a bulk regime called "viscoelastic" where the fingering instability shows a Saffman-Taylor-like behavior. We find good quantitative agreement with theory in both cases and present a reduced parameter describing the transition between the two regimes and allowing to predict the observed patterns over the whole range of viscoelastic properties.
△ Less
Submitted 28 August, 2008; v1 submitted 24 April, 2008;
originally announced April 2008.
-
Saffman-Taylor instability in a non-Brownian suspension: finger selection and destabilization
Authors:
C. Chevalier,
A. Lindner,
E. Clement
Abstract:
We study the Saffman-Taylor instability in a non-Brownian suspension by injection of air. We find that flow structuration in the Hele-Shaw cell can be described by an effective viscosity depending on the volume fraction. When this viscosity is used to define the control parameter of the instability, the classical finger selection for Newtonian fluids is recovered. However, this picture breaks do…
▽ More
We study the Saffman-Taylor instability in a non-Brownian suspension by injection of air. We find that flow structuration in the Hele-Shaw cell can be described by an effective viscosity depending on the volume fraction. When this viscosity is used to define the control parameter of the instability, the classical finger selection for Newtonian fluids is recovered. However, this picture breaks down when the cell thickness is decreased below approximatively 10 grain sizes. The discrete nature of the grains plays also a determinant role in the the early destabilization of the fingers observed. The grains produce a perturbation at the interface proportional to the grain size and can thus be considered as a "controlled noise". The finite amplitude instability mechanism proposed earlier by Bensimon et al. allows to link this perturbation to the actual values of the destabilization threshold.
△ Less
Submitted 21 June, 2007;
originally announced June 2007.
-
Inertial effects in the Saffman-Taylor instability
Authors:
C. Chevalier,
M. Ben Amar,
D. Bonn,
A. Lindner
Abstract:
For the Saffman-Taylor instability, the inertia of the fluid may become important for large Reynolds numbers Re. We investigate the effects of inertia on the width of the viscous fingers experimentally. We find that, due to inertia, the finger width can increase with increasing speed, contrary to what happens at small Re. We find that inertial effects need to be considered above a critical Weber…
▽ More
For the Saffman-Taylor instability, the inertia of the fluid may become important for large Reynolds numbers Re. We investigate the effects of inertia on the width of the viscous fingers experimentally. We find that, due to inertia, the finger width can increase with increasing speed, contrary to what happens at small Re. We find that inertial effects need to be considered above a critical Weber number We. In this case it can be shown that the finger width is governed by a balance between viscous forces and inertia. This allows us to define a modified control parameter 1/B', which takes the corrections due to inertia into account; rescaling the experimental data with 1/B', they all collapse onto the universal curve for the classical Saffman-Taylor instability. Subsequently, we try and rationalize our observations. Numerical simulations taking into account a modification of Darcy law to include inertia, are found to only qualitatively reproduce the experimental findings, pointing to the importance of three-dimensional effects.
△ Less
Submitted 22 June, 2005;
originally announced June 2005.
-
Pattern formation by injection of air in a non-Brownian suspension
Authors:
C. Chevalier,
A. Lindner,
E. Clement
Abstract:
We study the injection of air in a granular suspension. We use a linear Hele-Saw cell filled with a suspension which is displaced by air, leading to a Saffman-Taylor (fingering) instability. For the suspension, we use an iso-dense mixture where the fluid and the particles have the same density. The volume fraction of particles can thus be adjusted over a wide range. We discuss the question of an…
▽ More
We study the injection of air in a granular suspension. We use a linear Hele-Saw cell filled with a suspension which is displaced by air, leading to a Saffman-Taylor (fingering) instability. For the suspension, we use an iso-dense mixture where the fluid and the particles have the same density. The volume fraction of particles can thus be adjusted over a wide range. We discuss the question of an effective rheology inside the cell as well as the pattern formation as a function of the granular compacity. We finally report results on the finger width for stable fingers and the thresholds for their destabilization.
△ Less
Submitted 29 April, 2005;
originally announced April 2005.
-
Experiments in randomly agitated granular assemblies close to the jamming transition
Authors:
G. Caballero,
A. Lindner,
G. Ovarlez,
G. Reydellet,
J. Lanuza,
E. Clement
Abstract:
We present here the preliminary results obtained for two experiments on randomly agitated granular assemblies using a novel way of shaking. First we discuss the transport properties of a 2D model system undergoing classical shaking that show the importance of large scale dynamics for this type of agitation and offer a local view of the microscopic motions of a grain. We then develop a new way of…
▽ More
We present here the preliminary results obtained for two experiments on randomly agitated granular assemblies using a novel way of shaking. First we discuss the transport properties of a 2D model system undergoing classical shaking that show the importance of large scale dynamics for this type of agitation and offer a local view of the microscopic motions of a grain. We then develop a new way of vibrating the system allowing for random accelerations smaller than gravity. Using this method we study the evolution of the free surface as well as results from a light scattering method for a 3D model system. The final aim of these experiments is to investigate the ideas of effective temperature on the one hand as a function of inherent states and on the other hand using fluctuation dissipation relations.
△ Less
Submitted 24 March, 2004;
originally announced March 2004.